More miles to the gallon

Save money on your fuel

Produces a cleaner burn

Cleaner engine internals

Longer engine life

Cleaner emissions

Using on-board electrolysis to produce Hydrogen and Oxygen on demand and only when required.

We have developed an aspiration enhancement system specifically designed to give

the user more Miles Per Gallon.

The AES Systems, available for 1.0 to over 15 Litre engine capacities, Petrol and Diesel,

normally aspirated, injection, turbo… Cars, Vans, Trucks, Light Commercials, Boats & Generators, Heavy Goods Vehicles,

Construction Equipment, Buses, Coaches, Railway Engines, Military Vehicles. AES can be used with practically any machinery or vehicle with a combustion cycle.

The system is 3 seasons compatible with a trace heater option for long term winter

conditions.

The system is only operational when the engine is running.

This means there is no gas storage.

This is an on demand generator unlike LPG where you sacrifice your boot space or

spare wheel well for a large, heavy gas cylinder

The AES System is a compact unit that can be fitted under the bonnet of most cars or

piggy-backed on to larger vehicles.

On our basic system all you do is top up the AES system with our recommended

solution, every couple of hundred miles. Auto refill and larger reservoirs are available. No nasty chemicals to worry about, we’ve done all that.

As far as amperes are concerned, the AES System draws a nominal amount relative to the vehicle as long as the battery and electrical system is in good order… we only use residual power. The vehicle’s electrical system will cope more than adequately with it bearing in mind the alternator is always operational, so you might as well use some of

the energy you're generating.

The unit pipes the hybrid enhancements directly into the air intake system of the

vehicle so there's no need to worry about your engine management system. This is a fuel enhancement system, not a modification…

The AES is a component system so each part can be replaced, upgraded or repaired. Due to the design of the System it can be removed from one vehicle and re-fitted to another so when you change your vehicle you won't have to buy another AES.

This is the next evolution for the internal combustion engine. By fitting AES, you’re injecting hydrogen along with oxygen into the vehicles aspiration system. This gives

the benefits of a more efficient combustion of your fuel.

Surprisingly a large number of vehicles only burn in the region of 50% of the fuel that

goes through the engine. By enhancing the aspiration of the engine this wasted fuel is burned and more energy

is released.

Because the combustion of the fuel is more efficient, greater force is released, this

means you get more ‘bang for your buck’. By burning the fuel more efficiently there will be less carbon build up inside the engine

so the engine is cleaner on the inside.

By cleaning up the inside of the engine and burning more of the fuel that goes into the

engine, less unburned fuel enters the atmosphere from the exhaust pipe, less CO2 leaves the exhaust pipe and there are fewer particulates because they are being

burned and converted into energy.

The AES systems have full CE approval for the fitment to all types of vehicles and

plant. The AES system does not require E mark approval.

The system has been designed to be fitted as an accessory with little or no vehicle

interface, all cabling is attached to available out-let or out-put connecters, using on board auxiliary connections.

The pipe work is also deemed to be an accessory as it does not interfere nor interface

with the operational mechanics of the vehicle the system has been fitted to.

All aspects of the AES system are fitted to and not interfaced with the vehicle or plant it is fitted to. These aspects deem the system to be an accessory. Where-as E mark approval which would require certification for every vehicle the system was going to

be fitted to. We have approvals in place covering all vehicles and engine installations.

AES PRODUCT LIST

Model

Description Engine

DC2616-DC

DOMESTIC COMMUTER 1.0 to 2.4

DC2616-LC

LIGHT COMMERCIAL SINGLE TWIN CELL 1.0 to 2.4

S2616-M

MARINE 1.0 to 2.0

1675

Header 1212

Cell / header DC

MODULAR SYSTEM* 2.0 to 5.0 + 1616

Cell / Header 2212

Single unit twin cell / Header

C2616 7.5 TON / BUSS / COACH.

COMMERCIAL SINGLE TWIN CELL 12 OR 24 VOLT

2.0 – 5.0

HC1346 COMMERCIAL SINGLE TRIPLE CELL

12 OR 24 VOLT

5 to 7.0

HC2346 HGV TWIN UNIT TRIPLE CELL

24 VOLT 20 AMPS 10.0

HC3346 HEAVY DUTY HGV TRIPLE UNIT

TRIPLE CELL 24 VOLT 20-30 AMPS

15 Litre

Options

LSO-1 LED System On

LFI-1 LED Fill indicator

BFI-1 Buzzer fill indicator

AOL-1 Auto off & LED

AOB-1 Auto off & Buzzer

*NON STANDARD DC MODULAR SYSTEMS MAY BE EXEMPT.

EXAMPLE AES HGV INSTALLATION

07 January 2011

Dear Patric, New International Patent Application AES I am now pleased to confirm that we have prepared and filed a new international patent application for the AES. The international application claims the date of the earlier UK application no. GB1000061.0. The effective date of the international protection is therefore 4 January 2010. A copy of the application filed is enclosed. The text of the UK application was expanded on significantly to ensure that all features of the system were described in detail. The concept which we are claiming however remains the same. I am confident that there is one, if not several, patentable inventions within the AES system. We have, at this time, kept our options open as to which one, or ones, we will pursue to patents at a later date. No official receipt will be issued although we will shortly receive confirmation of the application number and filing date. The application will now be searched by the European Patent Office and we shall report the results of the search once they are received. The international application will ultimately need to be extended to national applications across key territories before July 2012. When filed, the national applications will claim the UK date. If you have any questions regarding this application please do not hesitate to contact me. Kind regards Yours sincerely Agile IP LLP

David J. Fry

Mr P. Cassidy Aspiration Enhancement Systems Holdings Ltd The Barns Whitestitch Lane Great Packington Meriden Coventry CV7 7JE

Your Reference: AES Our Reference: P0491/AES/D-WO

UK Head Office:

Aspiration Enhancement Systems Limited, The Barns, Whitestitch Lane, Meriden, CV7 7JE, England, U.K. Tel: 00 44 (0)1676 522330 Fax: 00 44 (0)1676 522445

Registration Number. 7476001

CONTACT DETAILS

Patric Cassidy Director

Address: AES Cassidy, The Barns, Whitestitch Lane,

Meriden, Warwickshire, CV7 7JE, England, U.K.

Telephone: +44 (0)1676 522 330

Mobile: +44 (0)7977 557 427

Email: patric.cassidy@aspirationenhancementsystems.com