afsc 2w1x1 aircraft armament systems
TRANSCRIPT
DEPARTMENT OF THE AIR FORCE CFETP 2W1X1
Headquarters US Air Force Parts I and II
Washington, DC 20330-1030 1 January 2012
AFSC 2W1X1
AIRCRAFT ARMAMENT SYSTEMS
Basic Senior Master
CAREER FIELD EDUCATION AND TRAINING PLAN
ACCESSIBILITY: Publications and forms are available on the e-publishing website at:
www.e-publishing.af.mil for downloading or ordering.
RELEASABILITY: There are no releasability restrictions on this publication.
i
TABLE OF CONTENTS
PART I
Preface ______________________________________________________________________1
Abbreviations/Terms Explained __________________________________________________2
Section A, General Information ___________________________________________________4
Purpose
Use
Coordination and Approval
Section B, Career Progression and Information ______________________________________5
Specialty Description
Skill/Career Progression
Training Decisions
Community College of the Air Force
Career Field Path
Section C, Skill Level Proficiency Requirements ____________________________________13
Purpose
Training Requirements
Section D, Resource Constraints _________________________________________________15
Section E, Transitional Training Guide ____________________________________________16
PART II
Section A, Specialty Training Standard ____________________________________________16
Section B, Support Materials ____________________________________________________18
Section C, Training Course Index ________________________________________________18
Section D, MAJCOM Unique Requirements ________________________________________18
Section E, Course Objective List _________________________________________________21
OPR: 363 TRS/TRR (Ms. Beverly Fisher)
Certified by: HQ USAF/A4LW (CMSgt Michael D. Lucchesi)
Supersedes: CFETP 2W1X1, 1 March 2010; CFETP 2W1X1 Change 1, 15 March 2011
Pages: 21
1
AIRCRAFT ARMAMENT SYSTEMS SPECIALTY
AFSC 2W1X1
CAREER FIELD EDUCATION AND TRAINING PLAN
Part I
Preface
1. A highly trained, motivated enlisted work force is the Air Force’s key resource in meeting
challenges of the future. If the Air Force is to meet present and future challenges, it is essential
the work force be effectively and efficiently trained to perform duties within each skill level of
the Air Force Specialty (AFS). The Career Field Education and Training Plan (CFETP) for the
Aircraft Armament Systems Specialty is a comprehensive education and training document that
identifies life cycle education and training requirements, training support resources, and
minimum core task requirements for this specialty. The CFETP will provide personnel a clear
career path to success and will install rigor in all aspects of career field training. Note: Civilians
occupying associated positions will use Part II to support duty position qualification training.
2. The CFETP consists of two parts; supervisors plan, manage, and control training within the
2W1X1 specialty using both parts of the plan.
2.1. Part I provides information necessary for overall management of the specialty. Section A
explains how everyone will use the plan. Section B identifies career field progression
information, duties and responsibilities, training strategies, and career field path. Section C
associates each level with specialty qualifications (knowledge, education, training, and other).
Section D indicates resource constraints. Some examples are funds, manpower, equipment, and
facilities. Section E identifies transitional training guide requirements for SSgt through MSgt.
2.2. Part II includes information for supervisors and trainers use to identify, plan, and conduct
training commensurate with the overall goals of this plan. Section A identifies the Specialty
Training Standard (STS) and includes duties, tasks, TRs to support training, AETC conducted
training, wartime course and core task and correspondence course requirements. Section B
contains the Course Objective List (COL) and training standards supervisors will use to
determine if airmen satisfied training requirements. Section C identifies available support
materials. An example is a Qualification Training Package (QTP) which may be developed to
support proficiency training. Section D identifies a training course index supervisors can use to
determine resources available to support training. Included here are both mandatory and optional
courses. Section E identifies MAJCOM unique training requirements supervisors can use to
determine additional training required for the associated qualification needs. At unit level,
supervisors and trainers will use Part II to identify plan, and conduct training commensurate with
the overall goals of this plan.
3. Using guidance provided in the CFETP will ensure individuals in the Aircraft Armament
Systems specialty receive effective and efficient training at the appropriate points in their career.
This plan will enable us to train today’s work force for tomorrow’s jobs.
2
ABBREVIATIONS/TERMS EXPLAINED
Advanced Training (AT). Formal specialty training used for selected airmen. Formal course
which provides individuals who are qualified in one or more positions of their Air Force
Specialty (AFS) with additional skills/knowledge to enhance their expertise in the career field.
Air Force Job Qualification Standard / Command Job Qualification Standard
(AFJQS/CJQS). A comprehensive task list, which describes a particular job type or duty
position. They are used by supervisors to document task qualifications. The tasks on AFJQS/
CJQS are common to all persons serving in the described duty position.
Career Field Education and Training Plan (CFETP). A comprehensive, multipurpose
document encapsulating the entire spectrum of education and training requirements for a career
field. It outlines a logical growth plan that includes training resources and is designed to make
career field training identifiable, to eliminate duplication, and to ensure the training is budget
defensible.
Continuation Training. Additional training exceeding requirements with emphasis on present
or future duty assignments.
Core Task. A task Air Force career field managers (AFCFMs) identify as a minimum
qualification requirement within an Air Force specialty.
Course Training Standard (CTS). An AETC document that identifies training tasks and
associated proficiency levels for a specific course. It serves as a contract between AETC and its
customers to show enlisted supplemental or officer training requirements.
Critical Task. Task(s) identified by the AFCFM, MAJCOM functional manager, and/or
Weapons/Armament Flight Superintendent as essential to holding the skill-level for the current
duty position.
Duty Position. When used in this CFETP refers to the work center currently assigned (i.e.:
weapons section, weapons standardization, armament shop, etc.)
Enlisted Specialty Training (EST). A mix of formal training (technical school) and informal
training (on-the-job) to qualify and upgrade airmen in each skill level of a specialty.
Exportable Training. Additional training via computer assisted, paper text, interactive video,
or other necessary means to supplement training.
Field Technical Training (Type 4). Special or regular on-site training conducted by a field
training detachment (FTD) or by a mobile training team.
Initial Skills Training (Type 3). AFS specific training an individual receives upon entry into
the Air Force or upon retraining into this specialty for award of the 3-skill level. Normally, this
training is conducted by AETC at one of the technical training centers.
Instructional System Development (ISD). A deliberate and orderly but flexible process for
planning, developing, implementing, and managing instructional systems. It ensures personnel
3
are taught in a cost efficient way the knowledge, skills, and attitudes essential for successful job
performance.
Master Task Listing (MTL). A comprehensive list of all tasks performed within a work center
and consisting of the current CFETP or AFJQS and locally developed AF Forms 797 (as a
minimum). Should include tasks required for deployment and/or UTC requirements.
Master Training Plan (MTP). Employs a strategy for ensuring the completion of all work
center job requirements by using a Master Task Listing and provides milestones for task, CDC
completion, and prioritizes deployment/UTC, home station training tasks, upgrade, and
qualification tasks.
Occupational Analysis Report (OAR). A detailed report showing the results of an
occupational survey of tasks performed within a particular AFS.
On-the-Job Training (OJT). Hands-on, over-the-shoulder training conducted to certify
personnel in both upgrade (skill level award) and job qualification (duty position certification)
training.
Proficiency Code Key. The proficiency code key shows the level of training and knowledge
provided by resident training and career development courses.
Proficiency Training. Proficiency training is additional training, either in-residence or
exportable advanced training courses, or on-the-job training, provided to personnel to increase
their skills and knowledge beyond the minimum required for upgrade.
Qualification Training (QT). Actual hands-on task performance training designed to qualify an
airman in a specific duty position. This training program occurs both during and after the
upgrade training process. It is designed to provide the performance skills/knowledge required to
do the job.
Qualification Training Package (QTP). An instructional package designed for use at the unit
to qualify, or aid qualification, in a duty position or program, or on a piece of equipment. It may
be printed, computer-based, or in other audiovisual media.
Resource Constraints. Resource deficiencies, such as money, facilities, time, manpower, and
equipment that preclude desired training from being delivered.
Specialty Training Package and COMSEC Qualification Training Package. A composite of
lesson plans, test material, instructions, policy, doctrine, and procedures necessary to conduct
training. These packages are prepared by AETC, approved by National Security Agency (NSA),
and administered by qualified communications security (COMSEC) maintenance personnel.
Specialty Training Standard (STS). An Air Force publication that describes an AFS in terms
of tasks and knowledge that an airman may be expected to perform or to know on the job. It
further serves as a contract between the Air Education and Training Command (AETC) and the
user to show the overall training requirements for an Air Force specialty code that the formal
schools teach.
4
Total Force. All collective Air Force components (active, reserve, guard, and civilian elements)
of the United States Air Force.
Training Business Area (TBA). A web-based application providing real-time visibility of
technical qualifications, certifications, and training status. It duplicates or replaces the
functionality of the STS.
Training Planning Team (TPT). Comprised of the same personnel as a U&TW, however TPTs
are more intimately involved in training development and the range of issues are greater than is
normal in the U&TW forum.
Upgrade Training (UGT). Mandatory training that leads to attainment of higher level of
proficiency and award of the 3-, 5-, 7-, 9-skill levels.
Utilization and Training Workshop (U&TW). A forum of MAJCOM Air Force Specialty
Code (AFSC) functional managers, Subject Matter Experts (SMEs), Career Field Manager and
AETC training personnel that determines career ladder training requirements for a designated
AFSC.
Wartime Tasks. The minimum tasks that will be taught in technical training in residence during
a wartime contingency. These apply only to in-residence 3-skill level courses taught.
Section A - General Information
1. Purpose. This CFETP provides the information necessary for Air Force Career Field
Managers (AFCFM), MAJCOM functional managers (MFMs), commanders, training managers,
supervisors and trainers to plan, develop, manage, and conduct an effective and efficient career
field training program. The plan outlines the training that individuals in this AFS should
receive in order to develop and progress throughout their career. This plan identifies initial
skills, upgrade, qualification, advanced and proficiency training. Initial skills training is the
AFS specific training an individual receives upon entry into the AF or upon retraining into this
specialty for award of the 3-skill level. Normally, this training is conducted by AETC at one of
the technical training centers. Upgrade training identifies the mandatory courses, task
qualification requirements, and correspondence course completion requirements for award of
the 3-, 5-, 7-, 9-skill level. Qualification training is actual hands-on task performance training
designed to qualify an Airman in a specific duty position. This training program occurs both
during and after the upgrade training process. It is designed to provide the performance skills
and knowledge required to do the job. Advanced training is formal specialty training used for
selected airmen. Proficiency training is additional training, either in-residence or exportable
advanced training courses, or on-the-job training provided to personnel to increase their skills
and knowledge beyond the minimum required for upgrade. The CFETP has several purposes—
some are:
1.1. Serves as a management tool to plan, manage, conduct, and evaluate a career field training
program. Also, it is used to help supervisors identify training at the appropriate point in an
individual’s career.
5
1.2. Identifies task and knowledge training requirements for each skill level in the specialty and
recommends education/training throughout each phase of an individual’s career.
1.3. Lists training courses available in the specialty, identifies sources of training, and the
training delivery method.
1.4. Identifies major resource constraints, which impact full implementation of the desired
career field training process.
2. Uses. The plan will be used by MFMs and supervisors at all levels to ensure comprehensive
and cohesive training programs are available for each individual in the specialty.
2.1. AETC training personnel will develop/revise formal resident, non-resident, field and
exportable training based on requirements established by the users and documented in Part II of
the CFETP. They will also work with the AFCFM and MFMs to develop acquisition strategies
for obtaining resources needed to provide the identified training.
2.2. MFMs will ensure their training programs complement the CFETP mandatory initial,
upgrade, and proficiency requirements. OJT, resident training, contract training, or exportable
courses can satisfy identified requirements.
2.3. Each individual will complete the mandatory training requirements specified in this plan.
The list of courses in Part II will be used as a reference to support training.
3. Coordination and Approval. The AFCFM is the approving official and waiver authority for
any changes to, and deviations from, this CFETP. The AFCFM will initiate an annual review of
this document to ensure currency and accuracy. MAJCOM representatives and AETC training
personnel will identify and coordinate on the career field training requirements. Using the list of
courses in Part II, they will eliminate duplicate training.
Section B - Career Progression and Information
4. Specialty Description.
4.1. Specialty Summary. Refer to the 2W1X1X AFSC specialty description in the Air Force
Enlisted Classification Directory (AFECD), part I available online at the Air Force Personnel
Services website (https://gum-crm.csd.disa.mil/app/login).
4.2. Duties and Responsibilities. Refer to AFSC specialty description (above) for the full listing
of duties and responsibilities. Loads and unloads nuclear and nonnuclear munitions, explosives,
and propellant devices on aircraft. Manages, controls, maintains, and installs aircraft bomb,
rocket, and missile release, launch, suspension, and monitor systems; guns and gun mounts; and
related munitions handling, loading, and test equipment. Related DoD Occupational Subgroup:
164600.
4.2.1. Loads, unloads, and positions munitions on aircraft. Loads, positions, performs safing
operations, and unloads munitions. Uses handling, loading, and checkout procedures and
equipment. Tests suspension, launch, and release systems for retentive locking, and manual or
6
electrical release. Analyzes malfunctions. Performs functional checks of launch and suspension
systems. Prepares munitions and inspects post loading weapons. Operates handling and loading
equipment, and mates munitions with aircraft release, launch, and suspension systems. Loads
and services aircraft gun systems. Tests electrical and electronic circuitry for continuity, voltage,
and proper operation. Tests for unwanted electrical signal or power before connecting
electrically actuated explosives and propellants. Installs ground safety devices on munition and
gun system components to prevent inadvertent detonation, launching, or firing. Inserts and
removes impulse cartridges associated with fuel tanks and pylons. Adjusts and installs fuses,
boosters, and delay elements in conventional munitions.
4.2.2. Inspects, repairs, and maintains aircraft release, launch, suspension, and monitor systems;
aircraft guns; and related equipment. Operates, inspects, and performs operator maintenance on
related munitions handling, loading, and test equipment. Examines for visual defects and proper
installation of systems components such as munitions ejector racks, loading and suspension
devices, shackles, rocket pods, pylons, aircraft ammunition, boosters, and feed chutes. Boresights
and performs after-firing inspection of aircraft guns. Examines aircraft guns for defects.
Analyzes malfunctions of munitions launch, release, suspension, and monitor systems, and
associated handling and loading equipment. Disassembles, repairs, or replaces mechanical,
electrical, electronic, and pneudraulic mechanisms of launch and release systems, and aircraft
gun systems. Removes, disassembles, and inspects parts and subassemblies for damage, rust,
corrosion, or acceptable clearances and tolerances. Makes adjustments and applies lubricants
and preservatives. Performs serviceability tests on aircraft guns, gun systems, and munitions
associated suspension equipment.
4.2.3. Performs armament systems maintenance functions. Modifies munitions launch, release,
suspension, and monitor systems to improve efficiency. Determines probable effect of
modifications on future maintenance and operational problems.
4.2.4. Plans, organizes, and directs aircraft armament systems maintenance activities.
Establishes and evaluates performance and training standards, maintenance controls, and
procedures. Checks methods and techniques used to load and unload munitions on aircraft, to
repair and maintain aircraft release and gun systems, and to maintain, repair, and modify
associated equipment. Ensures compliance with policies, directives, and safety procedures.
Analyzes productivity and work quality. Evaluates operational efficiency of aircraft guns and
munitions systems, and recommends modification.
5. Skill and Career Progression. Adequate training and timely progression from the
apprentice to the superintendent skill level play an important role in the Air Force’s ability to
accomplish its mission. It is essential that everyone involved in training must do their part to
plan, manage, and conduct an effective training program. The guidance provided in this part of
the CFETP will ensure each individual receives viable training at appropriate points in their
career.
5.1. Apprentice (3) Level. Individuals must successfully complete one of the following initial
skills training courses to be awarded the 3-skill level: J3ABR2W131C000 (A-10),
J3ABR2W131E025 (F-15), J3ABR2W131F026 (F-16), J3ABR2W131J028 (F-35),
J3ABR2W131K003 (B-52), J3ABR2W131L001 (B-1), J3ABR2W131N027 (F-22),
J3ABR2W131Q051 (RPA), or J3ABR2W131Z048 (Special Missions).
7
5.2. Journeyman (5) Level. In order to be awarded the 5-skill level in the Aircraft Armament
Systems specialty individuals must successfully complete the 2W151A and 2W151B CDCs, all
duty position tasks identified in the Master Task Listing (MTL), and all applicable 5-skill level
core tasks identified by an ―5B‖ or ―5F‖ in the Core Indicator column of TBA. After award of
the 5-skill level, available continuation training should be used based on an individual’s
particular duty position or other needs. A listing of continuation training is included but not
limited to training listed in Part II, Section D, of this CFETP.
5.3. Craftsman (7) Level. In order to be awarded the 7-skill level in the Aircraft Armament
Systems specialty, individuals must successfully complete the 7-skill level awarding course
(J3ACR2W171 048). Prior to attending the course, the upgrade trainee must successfully
complete CDC 2W171, all duty position tasks identified in the MTL, and all 7-skill level core
tasks identified by a 7 in the Core indicator column of TBA. After award of the 7-level,
available continuation training should be used based on an individual’s particular training needs.
A listing of continuation training is included but not limited to that training listed in Part II,
Section D, of this CFETP.
5.4. Superintendent (9) Level. In order to be awarded the 9-skill level in the Armament
Systems specialty, individuals must be in the grade of SMSgt and have successfully completed
the 9-skill level awarding course, J3AZR2W191 0A1 (effective 1 Mar 2013). (Not mandatory for
AFRC.) Continuation training, if available, should be used as needed based on an individual’s
particular needs.
6. Training Decisions. The CFETP uses a building block approach (simple to complex) to
encompass the entire spectrum of training requirements for the Aircraft Armament Systems
career field. The spectrum includes a strategy for when, where, and how to meet the training
requirements. The strategy must be apparent and affordable to reduce duplication of training and
eliminate a disjointed approach to training. The following key training decisions were made at
the 2W1X1 Utilization and Training Workshop (U&TW) held at Sheppard AFB, TX, 23-27 May
2011.
6.1. Initial Skills. The Fundamentals course added training on CAS description and
Maintenance Concepts; increased training on Progression in Career Field and TO Improvement;
deleted Live Fire and Metric Notation; and swapped Corrosion Control training from Procedures
to Identification. The A-10 course added training on the Detent Tester, the LAU-105 Detent
Test, and load/unload GBU-54; and swapped training from the CBU-87 to the CBU-103. The F-
15 course added training on the GBU-54; deleted training on the AGM-130 and GBU-15;
swapped training from the pylon adapter to the UPLA; and deleted BRU-61 backshop training.
The F-16 course added training on the BRU-61 R/I plus bench check, CMBRE, load/unload
AGM-88 and GBU-10, knowledge on GBU-12 and GBU-54; and deleted training on the AGM-
158 and GBU-24. The B-1 course added GBU-54 knowledge (and remove and install panels if
the trainer is modified to support); increased training on CRL; and decreased training on RAM
and four Weapons Bay tasks. The B-2/B-52 course had no changes. The F-22 course added
training on open/close canopy, LRU remove/install, operate gun purge door; and swapped
training from gun system to pylon functional check. The Special Missions course will split with
C-130, HH-60, and CV-22 remaining under the Z shred with training on the applicable AGE and
Gun tasks. A new course for RPAs will stand up with no change to MQ-1 training brought from
the Z shred but all new training for the MQ-9.
8
6.2. Five-Level Upgrade Requirements. Airframe specific 5-level core tasks were developed
with a standard of load/unload and configure aircraft for flightline personnel; one launcher and
one rack for backshop personnel. There were 134 5-level core tasks added (3 general, 60
flightline, and 61 backshop). Additional training on Defense Logistics Agency (DLA) will be
added to 2.14.1.1. Supply Discipline and Total Force Integration (TFI) will be added to 2.3
Relationship to AF Commands and Missions. There were no new tasks nor changes to
proficiency levels for the 5-level CDCs.
6.3. Seven-Level Upgrade Requirements. There were 5 new 7-level core tasks added:
Handling of Explosive Loaded Aircraft, Use CAS, Maintain Training Records, Review MIS
Automated Histories, and Use AF Form 2430. The 7-level CDCs added training on Total Force
Integration (TFI) against 2.3 Relationship to AF Commands and Missions. The 7-level resident
course will modify training on IMDS.
6.4. Nine-Level Upgrade Requirements. There were no changes to the 9-level course.
6.5. Proficiency Training. No changes were made to FTD proficiency training.
6.6. In-Resident Training Notes:
6.6.1. A munitions matrix will be maintained with the CFETP within TBA to annotate munition
applicability for resident course training.
6.6.2. Students assigned to B-2 units will attend the B-52 (J3ABR2W131K003) course due to
the small number of students requiring this training.
6.6.3. When training the LAU-128 (F-15) and the LAU-129 (F-16), the schoolhouse will cover
knowledge on recycling the forward dampeners.
6.6.4. F-16 resident training requires Stores Management System (SMS) loading and clearing
and system operational/functional checks to be conducted on a Block 40 or later aircraft.
6.6.5. Remotely Piloted Aircraft (RPA) resident training (J3ABR2W131Q051) will cover
training specified in the STS for MQ-1 and MQ-9.
6.6.6. Special Missions resident training (J3ABR2W131Z048) will cover training specified in
the STS for AC-130H, AC-130U, HH-60, and CV-22.
7. Community College of the Air Force. Enrollment in CCAF occurs upon completion of
Basic Military Training (BMT). CCAF provides the opportunity to obtain an Associate of
Applied Sciences Degree. In addition to its associate’s degree program, CCAF offers the
following:
7.1. Professional Certification. CCAF offers multiple professional certifications based on
specific education, experience and qualification requirements. Two certifications are listed
below. For additional information on these and other certifications see the CCAF web site
(http://www.au.af.mil/au/ccaf/certifications.asp).
9
7.1.1 CCAF Instructor Certification (CIC). The CIC program replaced the Occupational
Instructor Certification (OIC) on 1 January 2011. The purpose of the CIC is to recognize the
instructor's extensive faculty development training, education and qualification required to teach
a CCAF course and formally acknowledges the instructor's practical teaching experience.
7.1.2. Professional Manager Certification (PMC): CCAF offers the PMC for qualified senior
Air Force enlisted personnel who have demonstrated an advanced level of professional
accomplishment. The purpose of the certification is to recognize the individual’s outstanding
education and training required to lead and manage Air Force personnel and critical national
defense assets.
7.3. Trade Skill Certification. When a CCAF student separates or retires, a trade skill
certification is awarded for the primary occupational specialty. This certification translates the
member’s last PAFSC skill-level into terms understood by prospective employers (i.e.:
Apprentice, Journeyman, Craftsman / Supervisor, and Master Craftsman / Manager.) All are
transcribed on the CCAF transcript.
7.4. Degree Requirements. All airmen are automatically entered into the CCAF program. Prior
to completing an associate degree, the 5 skill-level must be awarded and the following
requirements must be met:
Semester Hours
Technical Education........................................................................................................ 24
Leadership, Management, and Military Studies (LMMS) ............................................. 6
Physical Education ......................................................................................................... 4
General Education .......................................................................................................... 15
Oral Communication, Written Communication, Mathematics, Social
Science, and Humanities
Program Elective ............................................................................................................ 15
Technical Education; LMMS; or General Education
Total ................................................................................................................................ 64
7.3.1. Technical Education (24 Semester Hours): Twenty-four semester hours are required to
fulfill the technical education requirement. Twelve semester hours must be applied from the
technical core area with the remaining 12 applied from either the technical core or the technical
elective areas. Completion of the initial skills resident training satisfies all or part of the technical
education requirement.
7.3.2. Leadership, Management, and Military Studies (LMMS) (6 Semester Hours): Professional military education and/or civilian management courses may be used to fill this
requirement. The preferred method of completing LMMS is through attending Airman
Leadership School (ALS), the Non-Commissioned Officer (NCO) academy and/or the Air Force
Senior NCO Academy.
7.3.3. Physical Education (4 Semester Hours): Completing basic military training satisfies the
4-semester-hour physical education requirement.
7.3.4. General Education (15 Semester Hours): The general education requirement is satisfied
by applying courses accepted in transfer or by testing credit. The CCAF General Education
10
Mobile (GEM) program will assist individuals pursuing general education requirements in a
distance learning format.
7.3.5. Program Elective (15 Semester Hours): Courses applicable to the Technical Education;
Leadership, Management, and Military Studies; or General Education may be used to satisfy
program elective hours.
7.4 Baccalaureate Degree. The Air University Associate-to-Baccalaureate Cooperative links
Airmen who have completed an associate degree to a collection of accredited "military friendly"
colleges and universities to consider when completing a four-year degree. The program
maximizes the application of military career education and training, and provides a multitude of
online academic and support services for the enlisted member through the Air Force Virtual
Education Center.
7.5. Off-Duty Education. Additional off-duty education is a personal choice that is highly
encouraged for all. Individuals desiring to become an Air Force instructor should be actively
pursuing an associate’s degree. A degreed faculty is necessary to maintain accreditation through
the Southern Association of Colleges and Schools.
8. Career Field Path.
8.1. Location/Skill level Table. Table 8.1 listed below provides a list of possible assignments.
The assignments are subject to change without notice. Members interested in assignments
should consult the Equals and Equals Plus listings for more detailed information.
Table 8.1 LOCATION 3 Level
(AB-A1C)
5 Level
(SrA)
5 Level
(SSgt)
7 Level
(TSgt)
7 Level
(MSgt)
9 Level
(SMSgt)
ANDERSEN, GUAM K X X X X X
AVIANO, ITALY F X X X X X
BARKSDALE, LOUISIANA K X X X X X
BOLLING, MARYLAND X
BUCHEL, GERMANY X X X X
CANNON, NEW MEXICO Q, Z X X X X X
CREECH, NEVADA Q X X X X X
DAEGU AB, SOUTH KOREA X
DAVIS-MONTHAN, ARIZONA C, Z X X X X X
DYESS, TEXAS L X X X X X
EDWARDS, CALIFORNIA F X X X X X
EGLIN, FLORIDA C, E, F, J X X X X X
EIELSON, ALASKA F X X X X
ELLSWORTH, SOUTH DAKOTA L X X X X X
ELMENDORF, ALASKA N X X X X X
GHEDI, ITALY X X X X
HILL, UTAH F X X X X X
HOLLOMAN, NEW MEXICO N, Z X X X X X
HURLBURT FIELD, FLORIDA Z X X X X X
JB PRL HBR-HICKAM, HAWAII N X X X X
KADENA, JAPAN E, Z X X X X X
KIRTLAND, NEW MEXICO Z X X X X X
KLEINE BROGEL, BELGIUM X X X X
KUNSAN, SOUTH KOREA F X X X X X
LAKENHEATH, UNITED KINGDOM E, Z X X X X X
11
LOCATION 3 Level
(AB-A1C)
5 Level
(SrA)
5 Level
(SSgt)
7 Level
(TSgt)
7 Level
(MSgt)
9 Level
(SMSgt)
LANGLEY, VIRGINIA N X X X X X
LUKE, ARIZONA F X X X X X
MCENTIRE, SOUTH CAROLINA F X X X X
MINOT, NORTH DAKOTA K X X X X X
MISAWA, JAPAN F X X X X X
MOODY, GEORGIA C, Z X X X X X
MOUNTAIN HOME, IDAHO E X X X X X
NELLIS, NEVADA C, E, F, J, N, Z X X X X X
OSAN, SOUTH KOREA C, F X X X X X
RAMSTEIN, GERMANY X X X X X
RANDOLPH, TEXAS X
ROBINS, GEORGIA X X
SEYMOUR JOHNSON, N. CAROLINA E X X X X X
SHAW, SOUTH CAROLINA F X X X X X
SHEPPARD, TEXAS X X X X
SPANGDAHLEM, GERMANY C, F X X X X X
TYNDALL, FLORIDA N X X X X X
VOLKEL, NETHERLANDS X X X X
WHITEMAN, MISSOURI K X X X X X
WRIGHT PATTERSON, OHIO X
8.2. Enlisted Career Path. Table 8.2 listed below provides information on the 2W1X1 enlisted
career path.
Table 8.2 2W1X1 Aircraft Armament Systems
Apprentice Journeyman Craftsman Superintendent CEM
Rank AB, Amn, A1C SrA SSgt Tsgt MSgt SMSgt CMSgt
High Year of
Tenure (HYT) 10 years 20 years 22 years 24 years 26 years 30 years
Earliest
Sew-On 28 months 3 years 5 years 8 years 11 years 14 years
2W1XX
Average
Sew-On
6 months
16 months
3 years 4.5 years 12.5 years 17 years 20 years 22 years
Badges AFI 36-2903
PME Airman
Leadership
School
- SSgt select or
SrA with 48mo TIS
- required to sew
on SSgt (Active Duty only)
NCO Academy
- TSgt or select
- Required to sew on MSgt
(active duty only)
Senior NCO Academy
- MSgt or SMSgt
- Required to sew on CMSgt (Active duty only)
- Joint SNCO PME
CMSgt
Leadership
Course
12
2W1X1 Aircraft Armament Systems
Apprentice Journeyman Craftsman Superintendent CEM
Rank AB, Amn, A1C SrA SSgt Tsgt MSgt SMSgt CMSgt
Upgrade
Training
3-level
- Awarded upon
graduation from Initials Skills
Course
5-level
- 12 months UGT
(retrainee – 9 mo) - Complete CDC
- Complete Core
Tasks
7-level
- Min rank of SSgt
- 12 mos OJT (retrainee – 6 mo) - Complete CDC
- Complete Core Tasks
- Complete Craftsman Course
7-level
9-level
-Complete
Advance Armament
Course
Professional
Development
(Note 1)
FTAC -PME - Train the
trainer - CMSAF Reading
List
-PME - NCOPE
- CCAF - Train the
trainer
-Instructor Certification
- CMSAF
Reading list - Enlisted-to-
AFIT
- PME - NCOPE
- CMSAF Reading list
- Enlisted-to-
AFIT
- PME SNCO
Induction Course
- SNCOPE
- CMSAF Reading list
- Enlisted-to-
AFIT
- PME - Professional
Manager Certification
- CMSAF
Reading list
- PME - Professional
Manager Certification
- CMSAF
Reading list
Career Ladder
(Note 2)
- Load Crew
member (mbr)
- Armament Team mbr
- Supervisor
- Load Crew mbr
- Armament (i.e.CAST) team
mbr
- LSC mbr - Lead crew mbr
- Tech Training
Instructor
- Load Crew
Chief
- Armament (i.e. CAST) TC
- LSC member
- Lead Crew Chief
- Tech Training
Instructor
- NCOIC
Loading
- NCOIC Maintenance
- Weapons
Expeditor - Load Crew
Chief
-Armament (i.e.CAST) TC
- Armament
Maintenance Section NCOIC,
AME Section
NCOIC or Support Section
NCOIC
- LSC TC - Lead Crew TC
- Quality
Assurance - Tech training
Instructor
- Academic Instructor
- Wpns Section
Chief
- Armt. Supt. - NCOIC
Loading
- NCOIC Maintenance
- Armament Sys.
NCOIC - MAJCOM
Armament Sys.
Manager - Quality
Assurance
- CDC writer
- Wpns Section
Chief
- Armt Supt. - WSS
- MFM
- WWM
- MFM
- CFM
Notes: 1. This should be used as a guide for Professional Development to expand knowledge and increase functional skills.
2. This should be used as a guide for Career Progression; this is not a complete list, but a guide to provide supervisors,
and members an idea to what positions they should be striving for to gain experience as they progress through the grade
and skill level.
8.3 My Enlisted Development Plan (MyEDP). All personnel are encouraged to establish a
personal development plan through the Air Force Portal. This account can be established by
selecting the Life & Career option from the Home page and following the prompts under My
Enlisted Development Plan (https://www.my.af.mil/afpc2w20/myxdp). MyEDP is designed to
be your "roadmap" to aid in your continued professional development. It is a useful tool in
preparing individuals for the challenges that all airmen encounter. The EDP is broken down into
three modules: Education, Training and Experience which provide information to enhance your
understanding. By no means does EDP guarantee success; it is only a suggested path based on
previous experiences of fellow enlisted members. Career field information and news will be
placed in MyEDP under the career information tab.
13
Section C - Skill Level Proficiency Requirements
9. Purpose. Skill level training requirements in this specialty are defined in terms of tasks and
knowledge requirements. This section outlines the specialty qualification requirements for each
skill level in broad, general terms and establishes the mandatory requirements for entry, award
and retention of each skill level. The specific task and knowledge training requirements are
identified in the STS at Part II, Section A of this CFETP.
10. Specialty Qualification:
10.1. Apprentice Level Training:
10.1.1. Specialty Qualification. This information will be located in the official specialty
description in AFECD, paragraph 3.
10.1.1.1. Knowledge. Knowledge is mandatory of: electricity; principles of physics, mechanics,
electronics, and ballistics applying to munitions launch, release, suspension, fusing, and arming
systems, and aircraft gun systems; use of precision measuring tools and equipment; interpreting
schematics and wiring diagrams; concepts and application of maintenance directives; nuclear and
nonnuclear munitions loading and safety procedures; and proper handling, use, and disposal of
hazardous waste and materials.
10.1.1.2. Education. For entry into this specialty, completion of high school or General
Education Development equivalency is mandatory. Also, completion of courses in mechanics or
basic electronics is desirable.
10.1.1.3. Training. Completion of a suffix specific basic aircraft armament systems course is
mandatory for award of the 3 level Armament AFSC.
10.1.1.4. Experience. N/A
10.1.1.5. Other. Per the AFECD, the following are mandatory as indicated.
10.1.1.5.1. For entry into this specialty: Normal color vision as defined in AFI 48-123,
Medical Examination and Standards. Trainees must have a minimum score of 60 Mechanical or
45 Electrical on their AFQT.
10.1.1.5.2. For entry, award, and retention of these AFSCs: No record of emotional
instability. Normal depth perception as defined in AFI 48-19.
10.1.1.5.3. For award and retention the specialty requires routine access to Secret material
or similar environment: For award and retention of AFSC 2W1X1X, completion of a current
National Agency Check, Local Agency Checks and Credit (NACLC) according to AFI 31-501,
Personnel Security Program Management. Note: Award of the 3-skill level without a completed
NACLC is authorized provided an interim NACLC has been granted according to AFI 31-501.
10.1.2. Training Sources and Resources. Completion of one of the suffix specific basic
armament systems courses satisfies the knowledge and training requirements for the award of the
14
3-skill level. A list of additional training courses to support education and training is in Part II,
Section D of this CFETP.
10.1.3. Implementation. The 3-skill level is awarded upon successful completion of any one of
the suffix specific aircraft armament systems apprentice courses.
10.2. Journeyman Level Training:
10.2.1 Specialty Qualification. This information will be located in the official specialty
description in AFECD, paragraph 3.
10.2.1.1. Knowledge. In addition to the knowledge gained at the Apprentice level, the
Armament Journeyman should have further knowledge in the areas of logistics maintenance,
TOs, forms, supply system, armament system operations and maintenance, and aircraft
suspension equipment.
10.2.1.2. Education. No additional educational requirements for award of the 5-skill level.
10.2.1.3. Training. Completion of the 5-level CDCs is required for award of the 5-skill level.
10.2.1.4. Experience. Qualification in and possession of AFSC 2W131C/E/F/J/K/L/N/Q or Z.
Also, experience loading and unloading munitions, or maintaining, repairing, and modifying
munitions launch, release, suspension, or aircraft gun systems.
10.2.1.5. Other. See paragraph 10.1.1.5.
10.2.2. Training Sources and Resources. Qualification training and OJT will provide
additional training and qualification on the core tasks identified in the STS. CDCs are Air Force
publications and are mandatory for use during upgrade/qualification training when available.
10.2.3. Implementation. Entry into upgrade training is initiated after an individual is awarded
the 3-skill level. The individual is then enrolled in CDC 2W151A or 2W151B. The 5-skill level
is awarded to individuals who complete 12 months of UGT (9 months for retrainees),
qualification on all STS 5-level core tasks identified for the assigned duty position, and
completes both 2W151A and 2W151B CDCs. Qualification training is initiated anytime an
individual is assigned duties he/she is not qualified to perform.
10.3. Craftsman Level Training:
10.3.1 Specialty Qualification. This information will be located in the official specialty
description in AFECD, paragraph 3.
10.3.1.1. Knowledge. In addition to the knowledge gained at the Apprentice and Journeyman
level, the Armament Craftsman should have further knowledge in the areas of explosive safety,
AFOSH, environmental protection, expediter, maintenance and inspection systems, TOs, forms,
supply system, troubleshooting, and wire/cable repair.
10.3.1.2. Education. No additional educational requirements for award of the 7-skill level.
15
10.3.1.3. Training. Completion of the 7-level CDC and the aircraft armament systems
craftsman course is mandatory for award of the 7-skill level.
10.3.1.4. Experience. Qualification in and possession of AFSC 2W151. Also, experience
performing or supervising functions such as loading and unloading munitions, or maintaining,
repairing, and modifying munitions launch, release, suspension, or aircraft gun systems.
10.3.1.5. Other. See paragraph 10.1.1.5.
10.3.2. Training Sources and Resources. Seven level upgrade training will be conducted by
certified trainers using applicable core tasks, 2W171 CDC, and the formal 7-level resident course
J3ACR2W171. Additional information on the 7-level course is available from the Education and
Training Course Announcements (ETCA) at https://etca.randolph.af.mil/.
10.3.3. Implementation. Entry into upgrade training is initiated on the first day of the
promotion cycle an individual is selected for promotion to SSgt. Qualification training is
initiated anytime an individual is assigned duties they are not qualified to perform. The 7-skill
level is awarded to individuals who complete 12 months of UGT, qualification on all STS 7-level
core tasks identified for the assigned duty position, completes the 2W171 CDC, completes the
J3ACR2W171 048 course, and attains the minimum grade of SSgt.
10.4. Superintendent Level Training:
10.4.1. Specialty Qualification. This information will be located in the official specialty
description in AFECD, paragraph 3.
10.4.1.1. Knowledge. The Armament Superintendent should have advanced knowledge and
skills on all aspects of the armament career field.
10.4.1.2. Education. No additional educational requirements for award of the 9-skill level.
10.4.1.3. Training. Completion of the advanced aircraft armament systems course is mandatory
for award of the 9-skill level (effective 1 Mar 2013). (Not mandatory for AFRC.)
10.4.1.4. Experience. Qualification in and possession of AFSC 2W171. Also, experience
managing and controlling functions such as loading and unloading munitions, or maintaining,
repairing, and modifying munitions launch, release, suspension, or aircraft gun systems.
10.4.1.5. Other. See paragraph 10.1.1.5.
10.4.2. Training Sources and Resources. Unit OJT will be used for training.
10.4.3. Implementation. Entry into upgrade training is initiated when an individual possesses
the 7-skill level and required grade. Qualification training is initiated anytime an individual is
assigned duties they are not qualified to perform.
Section D - Resource Constraints
11. Purpose. This section identifies known resource constraints, which preclude optimal and
desired training from being developed or conducted, including information such as cost and
16
manpower. Narrative explanations of each resource constraint and an impact statement
describing what effect each constraint has on training are included. Also included in this section
are actions required, OPR, and target completion dates. Resource constraints will be, as a
minimum, reviewed and updated annually.
12. Apprentice Level Training.
12.1. Constraints. The A-10, F-15 and F-16 courses have additional equipment requirements.
The new RPA course will require instructor manning, student man-years, and equipment.
12.1.1. Impact. The fighter courses will be implemented as scheduled but may have training
deficiencies if required equipment is not delivered on schedule. The RPA course will not be
implemented until instructor manning and student man-years are authorized. The course may be
implemented before all equipment is available but students may graduate early without all
requested training.
12.1.2. Resources Required. The A-10 course needs a CBU-103. The F-15 needs a UPLA.
The F-16 course needs 2 BRU-61 WLT, CMBRE, ADU-890 and a GBU-10. The RPA course
needs: 1 instructor, 2 student man-years, 1 MQ-9, 3 BRU-15, 1 A/N-AWM 101A Tester, 3 MA-
4B Bomb Racks, 1 mid-station pylon, 1 inboard pylon, 1 M299 Launcher, 1 GBU-12, and 1
GBU-38.
12.1.3. Action Required. Schoolhouse will submit out-of-cycle requests for the additional
munitions and submit appropriate requisition documents through supply for the identified
equipment items. Various OPRs are identified within the action items for actual acquisition of
the equipment items. Additionally, formal Course Resource Estimates (CRE) will be submitted
through HQ AETC.
12.2. OPR and Target Completion Date. The schoolhouse Training Manager and the AETC
Training Pipeline Manager are responsible for tracking open action items from the U&TW.
Updates are posted quarterly on the Armament SharePoint.
13. Five Level Training. No resource constraints.
14. Seven Level Training. No resource constraints
Section E - Transitional Training Guide
Note: There is currently no transition training requirements. This area is reserved.
Part II
Section A – Specialty Training Standard (STS)
15. Implementation. The 2W1X1 STS will be maintained within TBA. AETC will begin
using this STS for technical training for 3-level classes beginning February 2012 and 7-level
classes beginning Apr 2012.
17
16. Purpose. An STS describes in terms of tasks and knowledge the expectations of an individual
in a specific specialty is expected to perform or to know on the job. The STS identifies the training
requirements to achieve a 3-, 5-, 7-skill level, and 9 level within the 2W1X1 AFSC.
16.1. Column 1 (Task, Knowledge and Technical Reference) lists the most common tasks,
knowledge, and technical references (TR) necessary for airman to perform duties in the 3-, 5-,
and 7-skill level. An asterisk before the STS number indicates a wartime course objective.
16.2. Column 2 (Core Tasks) identifies specialty-wide minimum core task training requirements
for award of 2W151 and 2W171 AFSCs. A ―5B‖ indicates 5-level backshop core task; ―5F‖
indicates 5-level flightline core task and a 7 indicates core tasks for all 7-levels.
16.3. Column 3 (Certification for OJT) is used to record completion of tasks and knowledge
training requirements. Use automated training management systems to document technician
qualifications, if available. Task certification must show a certification/completed date.
16.4. Column 4 (Proficiency Codes Used to Indicate Training/Information Provided) shows
formal training and correspondence course requirements. It indicates the proficiency to be
demonstrated on the job by the graduate as a result of training on the task/knowledge provided
by the correspondence course. Note: When two codes are used, the first code (the code to the
left of the ―/‖) is the established requirement for resident training on the task/knowledge, and the
second code (the code to the right of the ―/‖) indicates the level of training provided in the course
due to resource constraints.
17. Qualitative Requirements. The qualitative requirements are identified with proficiency
codes used to indicate the level of training provided by resident training and CDCs. Additional
information can be found in the Qualitative Requirements table within the verbiage portion of the
2W1X1 product in TBA.
18. Job Qualification Standard (JQS). The STS becomes a JQS for OJT training when placed
in AF Form 623, Individual Training Record, and used according to AFI 36-2201.
18.1. Performance Standard. Tasks in column 1 are trained and qualified to the go/no go
level. ―Go‖ means the individual can perform the task without assistance and meets the local
requirements for accuracy, timeliness, and correct procedures. (―Go‖ level equates to 3c in the
STS proficiency code key.)
18.2. Documentation. Document and certify completion of training IAW AFI 36-2201,
Chapter 6 and the TBA Application User’s Guide. Supervisors, trainers, and trainees must
ensure all training documentation is contained within an Airman’s Individual Training Plan
(ITP).
18.3. Transcribing. Upon publication of a new CFETP, transcribe within 120 days (240 days
for ARC). When transcribing tasks from an external source into TBA, the tasks go into the
Airman’s archived task list. At that point, the supervisor can then select which tasks should be
unarchived and moved to an active status.
18
19. Weighted Airman Promotion System (WAPS). The STS is a guide for development of
promotion tests used in the WAPS. Specialty Knowledge Tests (SKTs) are developed at the
AETC Airman Advancement Division, by senior NCOs with extensive practical experience in
their career fields. The tests sample knowledge of STS subject matter areas judged by test
development team members as most appropriate for promotion to higher grades. Questions are
based upon study references listed in the WAPS catalog. Individual responsibilities are in
Chapter 1 of AFI 36-2605, Air Force Military Personnel Testing System. WAPS is not
applicable to the Air National Guard.
20. Recommendations. Report unsatisfactory performance of individual course graduates
using the Graduate Assessment Survey (GAS). The GAS will be reviewed by the wing weapons
manager or equivalent after the immediate supervisor makes comments to make sure the
response is directed toward technical training rather than personality traits. Report inadequacies
and suggested corrections to this STS through channels to 363 TRS/TRR, DSN 736-1828
referencing specific STS paragraphs. A customer service information line (CSIL) is also
available at DSN 736-5236 or email [email protected].
Section B – Course Objective List
21. Measurement: Each objective is indicated as follows: W indicates task or subject
knowledge, which is measured using a written test. PC indicates required task performance,
which is measured with a performance progress check. P indicates required task performance,
which is measured with a performance test. PC/W indicates separate measurement of both
knowledge and performance elements using a written test and a performance progress check.
22. Standard: The standard is a minimum of 70% on written examinations. Standards for
performance measurement are indicated in the objective and delineated on the individual
progress checklist. Instructor assistance is provided as needed during the progress check, and
students may be required to repeat all or part of the behavior until satisfactory performance is
attained.
23. Proficiency Level: Most task performance is taught to the ―2b‖ proficiency level which
means the student can do most parts of the task, but does need assistance on the hardest parts of
the task (partially proficient). The student can also determine step-by-step procedures for doing
the task. Additional information can be found in the Qualitative Requirements table within the
verbiage portion of the 2W1X1 product in TBA.
24. Course Objectives: A detailed listing of formal training objectives may be obtained by
submitting a written request to the AETC Training Manager, 363 TRS/TRR, 520 Missile Road,
Stop 244, Sheppard AFB TX 76311-2261.
Section C - Support Material
Note: There are currently no support materials. This area is reserved.
Section D - Training Course Index
19
25. Purpose. This section of the CFETP identifies training courses available for the specialty.
26. Air Force In-Residence Courses.
26.1 Technical Training. Course summary information can be found on the Education and
Training Course Announcements website https://etca.randolph.af.mil.
COURSE NUMBER TITLE LOCATION
J3ABR2W131C000 Aircraft Armament Systems Apprentice (A-10) Sheppard
J3ABR2W131E025 Aircraft Armament Systems Apprentice (F-15) Sheppard
J3ABR2W131F026 Aircraft Armament Systems Apprentice (F-16) Sheppard
J3AQR2W131J028 Aircraft Armament Systems Apprentice (F-35) Sheppard
J3ABR2W131J028 Aircraft Armament Systems Apprentice (F-35) Eglin
J3ABR2W131K003 Aircraft Armament Systems Apprentice (B-52) Sheppard
J3ABR2W131L001 Aircraft Armament Systems Apprentice (B-1) Sheppard
J3ABR2W131N027 Aircraft Armament Systems Apprentice (F-22) Sheppard
J3ABR2W131Q051 Aircraft Armament Systems Apprentice (RPA) Sheppard
J3ABR2W131Z048 Aircraft Armament Systems Apprentice (Special Missions) Sheppard
J3ACR2W171 048 Aircraft Armament Systems Craftsman Sheppard
J3AZR2W191 048 Advanced Aircraft Armament Systems Sheppard
26.2. Field Training. Specific locations can be found on the Education and Training Course
Announcements website https://etca.randolph.af.mil.
A/C COURSE NUMBER TITLE
A-10 J4AMP2W1X1 A00A A-10 Aircraft Armament Systems Craftsman (ALA Maintenance)
A-10 J4AMP2W1X1 B00B A-10 Weapons Maintenance (Off-Equipment)
A-10 J4AMP2W1X1 D00A A-10C 2W1X1 Weapons Differences Course
A-10 J4AMP2W1X1 E00A A-10 Aircraft Weapons Systems (On Equipment)
B-1 J4AMP2W1X1 A01B B-1B Aircraft Armament System Maintenance (Flightline)
B-1 J4AMP2W1X1 B01A B-1B Aircraft Armament Systems (Backshop)
B-1 J4AMP2W1X1 C01A B-1B Aircraft Armament Systems (Flightline Troubleshooting)
B-2 J4AMP2W1X1 B02A B-2 Aircraft Armament Systems Certification Training (Flightline)
B-2 J4AMP2W1X1 C02B B-2 Aircraft Armament Systems Certification Training (Backshop)
B-52 J4AMP2W1X1 A03A B-52H Aircraft Armament System Maintenance
C-130 J4AMP2W1X1 A17A AC-130 25MM Gun (GAU-12/U) System (IM)
C-130 J4AMP2W1X1 C17A 25 MM Ammunition Loading System (ALS) GFU-23/E Craftsman (I/M)
C-130 J4AMP2W1X1 D17A AC-130U 40MM & 105MM Gun System Maintenance (O/M)
C-130 J4AMP2W1X1 E17A AC-130U 25MM Gun System Maintenance (O/M)
C-130 J4AMP2W1X1 F17A AC-130H 40mm & 105mm Armament Systems Maintenance
C-130 J4AMP2W1X1 G17A AC-130 40mm BOFORS Gun (M2A1) System (I. Maintenance.)
C-130 J4AMP2W1X1 H17A AC-130 105MM Aerial Cannon System (I/M)
C-130 J4AMP2W1X1 I17A AC-130H Hot Gun Response
C-130 J4AMP2W1X1 J17A AC-130U Weapons Preflight/Postflight Checks
C-130 J4AMP2W1X1 K17A AC-130H Weapons Preflight/Postflight Checks
C-130 J4AMP2W1X1 L17A AC-130U 40mm Gun System Maintenance (O. Maintenance.)
C-130 J4AMP2W1X1 M17A AC-130U Hot Gun Response
Cv-22 J4AMP2W1X1 A21A CV-22 Armament Systems Craftsman (O/I Maintenance)
20
F-15 J4AMP2W1X1 A25A F-15E Aircraft Armament Maintenance (Weapons Delivery) (In Shop)
F-15 J4AMP2W1X1 B25A F-15E Aircraft Gun System Maintenance (In Shop)
F-15 J4AMP2W1X1 C25A F-15E Aircraft Gun System Maintenance (Flight Line)
F-15 J4AMP2W1X1 D25A F-15 A-D Weapons Maintenance (Gun System) (In Shop)
F-15 J4AMP2W1X1 E25A F-15 Weapons Maint (Programmable Armament Control Set) (PACS)
F-15 J4AMP2W1X1 F25A F-15E Aircraft Armament System Maint (Weapons Delivery) (Flight Line)
F-15 J4AMP2W1X1 G25A F-15 Weapons Maintenance
F-15 J4AMP2W1X1 H25A F-15 Weapons Maintenance (Suspension Equipment) (In Shop)
F-15 J4AMP2W1X1 I25A F-15A-E Aircraft Armament Maintenance (Weapons Delivery) (In Shop)
F-16 J4AMP2W1X1 A26A F-16 M61A1 20 MM Gun System (IM)
F-16 J4AMP2W1X1 B26A F-16 Armament System Gun Boresight
F-16 J4AMP2W1X1 C26A F-16 Armament Maintenance (AME)
F-16 J4AMP2W1X1 D26A LAU-118(V)4/A Launcher (I/M)
F-16 J4AMP2W1X1 E26A F-16C/D Aircraft Armament Systems
F-16 J4AMP2W1X1 G26A F-16 Aircraft Armament System Mx - BRU-57 Smart Bomb Rack
F-16 J4AMP2W1X1 H26A F-16 C/D CCIP Aircraft Armament System (Advanced Troubleshooting)
F-16 J4AMP2W1X1 I26A F-16C/D (CCIP) Aircraft Armament System Troubleshooting
F-16 J4AMP2W1X1 J26A F-16C/D Aircraft Armament System Troubleshooting
F-22 J4AMP2W1X1 A27B F/A-22 Armament Weapons Bay Door System and Suspension
F-22 J4AMP2W1X1 B27A F-22 Armament M61A2 Gun System (Flightline Conversion Training)
F-22 J4AMP2W1X1 C27A F-22 Armament Stores Management System (SMS) (Conversion Training)
F-22 J4AMP2W1X1 D27A F-22 Aircraft Armament Maintenance (Weapons Delivery) (In Shop)
F-22 J4AMP2W1X1 E27A F-22 M61A2 20 MM Gun System (IM)
MH-60 J4AMP2W1X1 A30B MH-60G Weapons Maintenance (O/I LEVEL)
J4AMP2W1X1 A48A Armament System (20MM UALS) Intermediate Maintenance (I/M)
J4AMP2W1X1 B48A Armament System (20MM LALS) Intermediate Maintenance (I/M)
J4AMP2W1X1 C48A Armament System (BRU-61/A) Intermediate Maintenance (I/M)
J4AMP30000 A48A Advanced Wire Maintenance
J4AMP30000 AS0A Basic Soldering Techniques
J4AMP30000 AS1A Miniature Electronic Repair (2M)
J4AMP30000 AS2A Micro-Miniature Electronic Repair (2M)
J4AMP30000 AS3A Module Test & Repair Test Equipment
27. Extension Course Programs:
27.1 Air University (AU) Courses.
COURSE NUMBER TITLE USER
CDC 2W151A & B Aircraft Armament Systems Journeyman 2W131 in UGT
CDC 2W171 Aircraft Armament Systems Craftsman 2W151 in UGT
27.2 Exportable Courses.
COURSE NUMBER TITLE MEDIA
J6AZW2AX5X 0F1A IMDS for Flight Line Web-based Training
J6AZW2AX5X 0B1A IMDS for Backshop Web-based Training
J6AZW2AX5X 0S1A IMDS for Supervisors Web-based Training
21
28. Other Training/Courseware. Training on the Technical Order System is available from
https://afkm.wpafb.af.mil/community/views/home.aspx?Filter=OO-TO-MC-35. Additional
multimedia products covering a wide range of topics can be found at
https://367trss.hill.af.mil/catalog. When available at unit level, Air Force Engineering and
Technical Services (AFETS) can be used for training assistance for non-loading weapons tasks
such as installation and removal of Alternate Mission Equipment (AME), gun and gun system
component installation/removal, slack adjustment, troubleshooting, test equipment use,
maintenance and repair. Coordinate directly with the weapons technician assigned to AFETS at
your unit.
Section E - MAJCOM Unique Requirements
29. MAJCOM manadatory training requirements (not applicable to ANG/AFRC) are listed in
the MAJCOM Mandatory Course List (MMCL) per AFI 36-2232.
BY ORDER OF THE SECRETARY OF THE AIR FORCE
OFFICIAL JUDITH A. FEDDER, Lt Gen, USAF
DCS/Logistics, Installations and Mission Support
Attachment 1 22 1 December 2009
This Block Is For Identification Purposes Only Name Of Trainee Printed Name (Last, First, Middle Initial)
Initials (Written)
SSAN
Printed Name Of Certifying Official And Written Initials
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
N/I
QUALITATIVE REQUIREMENTS
Proficiency Code Key
Scale
Value Definition: The individual
Task
Performance
Levels
1 Can do simple parts of the task. Needs to be told or shown how to do most of the task. (Extremely
Limited)
2 Can do most parts of the task. Needs only help on hardest parts. (Partially Proficient)
3 Can do all parts of the task. Needs only a spot check of completed work. (Competent)
4 Can do the complete task quickly and accurately. Can tell or show others how to do the task.
(Highly Proficient)
*Task
Knowledge
Levels
a Can name parts, tools, and simple facts about the task. (Nomenclature)
b Can determine step by step procedures for doing the task. (Procedures)
c Can identify why and when the task must be done and why each step is needed.
(Operating Principles)
d Can predict, isolate, and resolve problems about the task. (Advanced Theory)
**Subject
Knowledge
Levels
A Can identify basic facts and terms about the subject. (Facts)
B Can identify relationship of basic facts and state general principles about the subject. (Principles)
C Can analyze facts and principles and draw conclusions about the subject. (Analysis)
D Can evaluate conditions and make proper decisions about the subject. (Evaluation)
Explanations
* A task knowledge scale value may be used alone or with a task performance scale value to define a level of knowledge for a specific task. (Example: b and 1b)
** A subject knowledge scale value is used alone to define a level of knowledge for a subject not directly related to any specific task, or for a subject common to several tasks.
- This mark is used alone instead of a scale value to show that no proficiency training is provided in the course or CDC.
/ This mark is used with proficiency codes to show training required but not given due to limitations in resources. (ex. 2b/b, 3c/-, etc.)
NOTE: All tasks and knowledge items shown with a proficiency code are trained during war time.
23 1 January 2012
AIRMUNITIONS MATRIX
The X denotes munitions chosen for specific resident course load and unload training (1b level)
and munition characteristics training (A level). The * denotes munitions chosen for
characteristics training only (A level) in the respective resident course. The F denotes munitions
forecasted for future training but are not covered in the resident courses at this time.
J3ABR2W131 C E F N K K L Z Z Q Q
A-10 F-15 F-16 F-22 B-52 B-2 B-1 C-130 H-60 MQ-1 MQ-9
Ammunition X X X X - - - * * - -
AGM-65 X - X - - - - - - - -
AGM-86 - - - - * - - - - - -
AGM-88 - - X - - - - - - - -
AGM-154 (JSOW) - - - - - - - - - - -
AGM-158 (JASSM) - X - - X * X - - - -
AIM-9/AIM-9X X X X X - - - - - - -
AIM-120 - X X X - - - - - - -
ALE-50 - - * - - - * - - - -
B-61 - * * - X * - - - - -
B-83 - - - - * * - - - - -
BDU-33 X - X - - - - - - - -
BLU-109 - - - - - - - - - - -
AGM-114 Hellfire - - - - - - - - - X X
CBU-87/89 * * - - - - - - - - -
CBU-103/104/105/107 X - X - X * X - - - -
Chaff (all types) X X X X - - X * * - -
Flares (all types) X X X X * - X * * - -
GBU-10 X - X - - - - - - - -
GBU-12 * X * - - - - - - - X
GBU-24 - - - - - - - - - - -
GBU/EGBU-27 - * - - - - - - - - -
GBU/EGBU-28 - - - - - * - - - - -
GBU-31 (JDAM) - X - - X * X - - - -
GBU-32 (JDAM) - - - X - - - - - - -
GBU-38 (JDAM) X * X - - * X - - - X
GBU-39 (SDB) - X * * - - - - - - -
GBU-54 (LJDAM) * * * - - - * - - - -
Impulse cartridges X X X X X - X - * - -
MK-82/84 X - - - X * * - - - -
Naval Mines - - - - * - - - - - -
Rocket (2.75‖) X - * - - - - - - - -
SUU-25 X - - - - - - - - - -
SUU-67 (6 missiles) - - - - X - - - - - -
ADM-160B (MALD) - - * - * - - - - - -
24 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
1 AIRCRAFT ARMAMENT
SYSTEMS CAREER FIELD
1 January 2012
2 2W1X1 General Requirements TR: AFIs 21-101, 36-2502, 2W1X1
CFETP, AF Enlisted Classification
Directory
* 2.1 Progression in the 2W1X1
Career Field
B - - B - -
* 2.2 Duties of AFSC 2W1X1 B - - B - -
* 2.3 Relationship to Air Force
Commands and Missions
B - - B - B
2.4 MUNITIONS ENTERPRISE
2.4.1 Conventional TR: AFPD 21-200, AFI 10-401, 21-
101, 21-200, AFMAN 91-201, TTP
- - - A - -
2.4.2 Nuclear TR: AFDD 3-72, AFGM 20-1, AFI
10-201, 21-204, 63-125, 91-101, 91-
102, 91-103, 91-107, 91-111, 91-112,
91-221
- - - A - -
2.5 SECURITY TR: AFI 10-701, 31-Series, 91-Series,
DoD 5200.1, DoDR 5210.42, DoD
Manual 4160.21-M-1
2.5.1 Resources Security
2.5.1.1 Facilities - - - B - -
* 2.5.1.2 Munitions B - - B - -
2.5.1.3 Equipment and Supplies - - - B - -
2.5.1.4 Firearms - - - B - -
2.5.1.5 Demilitarization Requirements - - - A - -
2.5.2 Communications Security
(COMSEC)
2.5.2.1 Classification of Information - - - - - -
2.5.2.2 Prevention of Security
Violations
- - - - - -
2.5.2.3 Security Precautions Involved
in Communications
- - - - - -
* 2.5.3 Specific OPSEC
Vulnerabilities of AFSC
2W1X1
B - - B - -
2.5.4 COMPUSEC - - - - - -
2.5.5 Nuclear Surety Program TR: AFI 91-101
2.5.5.1 Personnel Reliability Program
(PRP)
* 2.5.5.1.1 Principles A - - B - -
* 2.5.5.1.2 Personal Responsibilities A - - B - -
* 2.5.5.1.3 Types of PRP A - - B - -
2.5.5.2 Two Person Concept (TPC) TR: DoD S-5210.42-R, AFMAN 10-
3902, AFI 91-Series
* 2.5.5.2.1 Principles A - - B - -
* 2.5.5.2.2 Personal Responsibilities A - - B - -
* 2.5.5.2.3 Principles of No-Lone Zone A - - B - -
25 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.5.5.3 Weapons System Safety Rules
(WSSR)
* 2.5.5.3.1 Principles A - - B - -
* 2.5.5.3.2 Personal Responsibilities A - - B - -
* 2.5.5.3.3 Types of Faults A - - B - -
2.5.5.4 Nuclear Certified Equipment
(NCE) TR: AFI 91-103, MNCL, AFI 63-125
* 2.5.5.4.1 Principles of NCE Program A - - B - -
* 2.5.5.4.2 Master Nuclear Certification
List (MNCL)
A - - B - -
2.5.5.4.3 Verify NCE using the MNCL * - - - - 1b -
2.5.5.5 Accident, Incident, and
Deficiency Reporting
* 2.5.5.5.1 Principles A - - B - -
* 2.5.5.5.2 Types of Reports A - - B - -
2.5.5.5.3 Process Dull Sword - - - - 1b -
* 2.5.5.6 Tamper Control and Detection
Program
A - - B - -
2.6 EXPLOSIVE SAFETY TR: TOs 00-25-172, 11A-1-33, AFI
91-101, 91-202, 91-204, AFMAN 91-
201
* 2.6.1 Hazards B - - B - B
* 2.6.2 Weapons Safety B - - B - B
2.6.3 Net Explosive Weight and Site
Plans
- - - - B B
2.6.4 Site Licensing Process - - - - - A
2.6.5 Quantity-Distance (Q-D) - - - - - B
2.6.6 Handling of Explosive Loaded
Aircraft
* - - - - - B
2.6.7 Accident, Incident, Deficiency
& Mishap Reports
- - - - - B
* 2.6.8 Live Fire / Explosive
Familiarization
- - - - - -
2.7 AF OCCUPATIONAL
SAFETY AND HEALTH
(AFOSH) AND
ENVIRONMENTAL
PROTECTION PROGRAMS TR: TOs 00-25-172, 11A-1-33, 31-1-
141-1, AFIs 32-2001, 32-7065, 66-51,
90-821, Applicable AFOSH Stds: 91-
Series, Installation Restoration
Program Management Guidance
Handbook, AFP-19-5
2.7.1 AFOSH
* 2.7.1.1 Hazards of AFSC 2W1X1 B - - B - -
2.7.1.2 AFOSH Standards for AFSC
2W1X1
- - - A B -
* 2.7.1.3 Safety Practices Applicable to
AFSC 2W1X1
B - - B B -
* 2.7.1.4 FOD Prevention B - - B - -
2.7.2 Environmental Protection
26 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.7.2.1 Federal Hazard
Communication Training
Program
- - - - - -
2.7.2.2 Hazards and Toxic Waste
Management
2.7.2.2.1 Functions and Responsibilities - - - B - -
2.7.2.2.2 Sources and Characteristics - - - B - -
2.7.2.2.3 Identification / Disposal - - - B - -
2.7.2.2.4 Hazardous Materials / Waste - - - B - -
2.8 SUPERVISION TR: TO 00-20-1, AFIs: 21-101, 21-
103, 21-201, 36-2201, 36-2202, 91-
Series, -1 Flight Manuals
2.8.1 Orient New Personnel - - - - - -
2.8.2 Assign Personnel to Positions - - - - - -
2.8.3 Plan Work Assignments and
Priorities
- - - - B A
2.8.4 Schedule Work Assignments - - - - - A
2.8.5 Munitions Maintenance
Handling Equipment (MMHE)
- - - - - A
2.8.6 Establish
2.8.6.1 Work Methods - - - - - -
2.8.6.2 Work Controls - - - - - -
2.8.6.3 Performance Standards - - - - - -
2.8.7 Evaluate Work Performance
of Subordinate Personnel
- - - - - -
2.8.8 Resolve Technical Problems
Encountered by Subordinate
Personnel
- - - - - -
2.8.9 Recommend Policy Changes
on Utilization of Personnel
and Equipment
- - - - - -
2.8.10 Counsel Personnel and
Resolve Individual Problems
- - - - - -
2.8.11 Initiate Action to Correct
Substandard Personnel
Performance
- - - - - -
2.8.12 Initiate Action to Commend
Superior Performance
- - - - - -
2.8.13 Perform Self-Inspections - - - - - -
2.8.14 Inspection/Evaluation
Programs
- - - - - -
2.8.15 Expediter
2.8.15.1 Flightline Communications
Requirements
- - - - B B
2.8.15.2 Flightline Maintenance
Requirements
- - - - - B
2.8.15.3 Flightline Loading Operations
Requirements
- - - - - B
2.8.15.4 Proficiency Loading and
Weapons Load Training
- - - - - -
2.8.15.5 Aircraft Configuration - - - - - B
2.8.15.6 Aircraft Related Status Codes - - - - B B
27 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.8.15.7 Aircraft Status Determination
by the Mission Essential
Subsystems Listing (MESL)
- - - - B B
2.8.15.8 Aircraft Impoundment and
Release
- - - - B B
2.8.15.9 Flying Schedules * - - - - B B
2.8.15.10 Munitions Accountability and
Reconciliation Procedures
- - - - B -
2.8.15.11 Combat Ammunitions System
(CAS)
2.8.15.11.1 Description B - - - - B
2.8.15.11.2 Use CAS * - - - - 2b -
2.8.15.12 Cannibalization Procedures - - - - B -
2.8.15.13 Nuclear System Fault Isolation - - - - - -
2.8.15.14 Use Forms
2.8.15.14.1 AF Form 2430 or Equivalent * - - - - 2b B
2.8.15.14.2 AF Form 2434 or Equivalent - - - - 2b B
2.8.15.15 Emergency Action Procedures - - - - - -
2.9 TRAINING TR: AFI 36-2101, 36-2201, AFMAN
36-2236
2.9.1 Evaluate Personnel to
Determine Need for Training
- - - - - -
2.9.2 Plan and Supervise OJT
2.9.2.1 Prepare Job Qualification
Standards
- - - - - -
2.9.2.2 Conduct Training - - - - - -
2.9.2.3 Counsel Trainees on their
Progress
- - - - - -
2.9.2.4 Monitor Effectiveness of
Training
2.9.2.4.1 Career Knowledge Upgrade - - - - - -
2.9.2.4.2 Job Proficiency Upgrade - - - - - -
2.9.2.4.3 Qualification - - - - - -
2.9.3 Maintain Training Records * - - - -
B
2.9.4 Evaluate Effectiveness of
Training Program
- - - - B B
2.9.5 Recommend Personnel for
Training
- - - - - -
2.9.6 Manage CDCs Progression - - - - B B
2.10 LOGISTICS
MAINTENANCE TR: TO 00-20-Series, AFI 21-101,
AFCSM 21-Series
* 2.10.1 Basic Functions within the
Maintenance Complex
A - - B - -
* 2.10.2 Maintenance Concepts A - - - - -
* 2.10.3 Maintenance Data Collection A - - B - -
* 2.10.4 Processing and Controlling of
Parts
A - - B - -
* 2.10.5 Management of Training A - - A - B
28 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.10.6 OPLAN / Employment
Planning
- - - - - B
2.10.7 Mobility Deployment Pallet
Build-Up
- - - - - B
2.10.8 DD Form 1348-1A - - - - - B
2.10.9 Generation Flow Planning - - - - - B
2.10.10 Nonnuclear Consumable
Annual Analysis (NCAA) and
Wartime Consumable
Distribution Objective
(WCDO)
- - - - - B
2.10.11 War Mobilization Plans - - - - - B
2.11 MAINTENANCE AND
INSPECTION TR: TO 00-20-Series, 00-35D-54, AFI
21-101, AFCSM 21-Series, AFMAN 23-215
* 2.11.1 Maintenance Systems A - - B - B
* 2.11.2 Inspection Systems A - - B B B
2.11.3 Maintenance Data Collection
Forms
* 2.11.3.1 Characteristics A - - - - -
2.11.3.2 Complete AFTO Form 349 - - - - - -
* 2.11.3.3 Complete AFTO Form 350 * 2b - - - - -
2.11.4 Report of Discrepancy (ROD)
/ Supply Discrepancy Report
(SDR)
- - - - - B
2.11.5 Deficiency Reporting
* 2.11.5.1 System Description A - - - B B
2.11.5.2 Process Deficiency Reports * - - - - 2b B
2.11.5.3 Deficiency Report Criterion - - - B - B
2.11.6 Maintenance Information
Systems
* 2.11.6.1 Characteristics B - - B - B
* 2.11.6.2 Create / Schedule Job * 2b - - - - -
* 2.11.6.3 Open / Close Job * 2b - - - - -
* 2.11.6.4 Run Maintenance Screen
Inquiry
* 2b - - - 2b -
2.11.6.5 Run Maintenance Supervisory
Screen
* - - - - 2b -
2.11.6.6 Review Automated Histories * - - - - 2b -
2.11.6.7 Use and Interpret Management
Database Products
* - - - - - -
2.11.6.8 Perform Supervisory
Production Inspection of
Completed Maintenance
Action on Armament Systems
* - - - - - -
2.12 TECHNICAL ORDERS (TO) TR: TO 00-5-1, 00-5-15, AFI 21-303,
AFPD 21-3
* 2.12.1 Characteristics B - - B - -
* 2.12.2 Locate Desired Information * 2b - - B - -
29 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 2.12.3 Use Technical Orders / Job
Guides when Performing
Maintenance and Inspections
* 2b - - B - -
* 2.12.4 Technical Order Files A - - B - -
* 2.12.5 TO Improvement Program B - - B - B
2.12.6 TO / TCTO Management - - - - B B
2.13 MAINTENANCE AND
EQUIPMENT FORMS TR: TO 00-20-1, AFGM 20-1,
AFMAN 23-110
2.13.1 Aircraft Forms
2.13.1.1 Manual
* 2.13.1.1.1 Characteristics B - - B - B
* 2.13.1.1.2 Complete AFTO Form 781A F 2b - - - - -
2.13.1.1.3 Complete AFTO Form 781H - - - - - -
2.13.1.1.4 Complete AFTO Form 781K - - - - - -
2.13.1.2 Automated
2.13.1.2.1 Characteristics - - - - - B
2.13.1.2.2 Complete AFTO Form 781A F - - - - - -
2.13.1.2.3 Complete AFTO Form 781H - - - - - -
2.13.1.2.4 Complete AFTO Form 781K - - - - - -
2.13.2 Equipment Forms
* 2.13.2.1 Characteristics A - - B - B
* 2.13.2.2 Use AFTO Forms 244 / 245 * 2b - - - - -
* 2.13.3 Historical Records (AFTO
Form 95 / Automated 95)
* A - - B - B
2.13.4 Condition Tags
* 2.13.4.1 Characteristics A - - B - B
2.13.4.2 Use DD Form 1574 * - - - - - -
2.13.4.3 Use DD Form 1575 - - - - - -
2.13.4.4 Use DD Form 1576 - - - - - -
2.13.4.5 Use DD Form 1577 / 1577-1 - - - - - -
2.13.4.6 Use DD Form 1577-2 - - - - - -
2.14 SUPPLY SYSTEM TR: AFI 21-101, 21-103, 21-110, 21-
200 Series, 23-111, AFCAT 21-209,
AFMAN 23-110, TO 35-1-24
2.14.1 Base Supply
2.14.1.1 Supply Discipline - - - B - B
2.14.1.2 Issue Procedures - - - B - B
2.14.1.3 Turn-In Procedures - - - B - B
2.14.1.4 DIFM Procedures - - - B B B
2.14.1.5 SPRAM - - - B B B
2.14.1.6 Readiness Spares Packages
(RSP)
- - - - - B
2.14.1.7 Stock Fund - - - - - B
2.14.1.8 AFTO Form 375 - - - - - B
2.14.1.9 Air Force Equipment
Management System
(AFEMS)
- - - - B B
2.14.1.10 Allowance Standards (AS) - - - - B B
2.14.1.11 Nuclear Weapons Related
Material (NWRM)
30 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.14.1.11.1 Principles A - - B - -
2.14.1.11.2 Tracking - - - - - -
2.14.2 Munitions Supply
2.14.2.1 Munitions Issue - - - A - B
2.14.2.2 Munitions Turn-In - - - A - B
2.14.2.3 Munitions Forecasting - - - - - B
2.14.2.4 Nuclear Ordnance Commodity
Management (NOCM)
- - - - - B
2.14.2.5 Items of Special Interest
Reporting
- - - - - B
2.15 CORROSION CONTROL TR: TO 1-1-2
* 2.15.1 Identification B - - - - -
2.15.2 Procedures - - - B - -
2.16 EQUIPMENT AND TOOLS TR: TO 0-4-6-2, 1-1A-8, Applicable
Equipment TO 32-1-101, AFI 21-101
* 2.16.1 Use Torque Wrench * 3b - - - - -
2.16.2 Use Measuring Equipment
* 2.16.2.1 Thickness Gauge 2b - - - - -
* 2.16.2.2 Micrometer 2b - - - - -
2.16.2.3 Depth Gauge - - - - - -
2.16.2.4 Pin Protrusion Gauge - - - - - -
* 2.16.3 Use Composite Tool Kit
(CTK)
* 3b - - - - -
2.16.4 Selection and Use
* 2.16.4.1 Common Hand Tools 3b - - - - -
2.16.4.2 Bench Grinders - - - - - -
2.16.4.3 Pneumatic Power Tools - - - - - -
2.16.4.4 Electric Power Tools - - - - - -
2.16.4.5 Degreasers - - - - - -
2.17 STRUCTURAL
HARDWARE TR: TOs 00-25-234, 1-1A-8, 1-1A-14,
1-1A-15
* 2.17.1 Select and Use * 3b - - - - -
* 2.17.2 Use Safety Wiring Techniques * 3b - - - - -
2.17.3 Chafing Awareness - - - - - -
2.18 GENERAL AIRCRAFT
FUNDAMENTALS
2.18.1 Principles of Armament
System Operations TR: TOs 1A-10A-2-1-1, 1A-10C-2-1-
1, 1B-1B-2-94GS-00-1, 1B-2A-94GS-00-1, 1B-52H-2-31GA-Series, 1B-
52H-2-38GA-Series, 1B-52H-33-2-1,
1B-52H-33-2-2, 1C-130(a)H-2-94JG series, 1F-15()-2-94GS-Series, 1F-16-
2-94GS-00-1, 1F-117A-2-94GS-1, 1F-
117A-33-1-2, 1H-53(M)J-2-1, 1H-60(H)G-2-1, 1Q-1-1, 1Q-9-1
2.18.1.1 Bombing - - - B - -
2.18.1.2 Missile - - - B - -
2.18.1.3 Jettison - - - B - -
2.18.1.4 Chaff / Flare - - - B - -
31 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.18.1.5 Gun / Handling System TR: TOs 1A-10A-2-94JG-6, 1A-10C-
2-94JG-6, 1F-15()-2-94JG-50-1, 1F-
16()-2-94JG-50-1, 11W1-7-15-2,
11W1-7-16-2, 11W1-17-2, 11W1-12-4-32, 11W1-12-8-61, 11W1-12-11-2,
11W1-12-12-2, 11W1-12-14-2,
11W1-13-3-132, 11W1-13-5-2, 11W1-15-18-1, 11W1-33-8-2 11W1-
33-1-102, 11W1-33-6-2, 11W1-33-7-
2, 11W2-5-2-62, NAVAIR 11-95M240D1-1
2.18.1.5.1 Electrical - - - B - -
2.18.1.5.2 Mechanical - - - B - -
2.18.1.5.3 Theory of Operation - - - B - -
2.18.2 Aircraft Armament Systems
Maintenance TR: TOs 1A-10A-2-94JG-series, 1A-
10C-2-94JG-series, 1B-1B-2-94JG- series, 1B-2A-2-94JG-series, 1B-
52H-2-31JG-series, 1B-52H-2-38JG
-series, 1B-52H-2-38JG-series, 1C- 130A(U)-2-94JG series; 1C-30(A)H
-2-94JG series; 1F-15()-2-94JG-
series, 1F-16()-2-10JG-Series, 1H- 60(H)G-112, , 1Q-1(M)B-2-94JG
series;1Q-9(M)A-2-94JG series,
11W1-13-6-2, 11W1-33-7-2
2.18.2.1 Aircraft Safe for Maintenance
Procedures TR: TOs 1A-10A-2-1-1, 1A-10A-33-
1-2, 1A-10C-2-1-1, 1A-10C-33-1-2, 1B-1B-2-05JG-10-1, 1B-1B-2-05JG-
20-1, 1B-1B-2-05JG-50-1, 1B-2A-2-
05JG-10-1, 1B-52H-2-2(), 1F-15()-2-05JG-00-1, 1F-16()-2-10JG-00-1, 1C-
130(M)H-2-05JG-00-1, 1C-130H-2-
05JG-00-1; 1Q-9(M)A-2-05JG-00-1, 1Q-1(M)B-2-05JG-00-1
- - - B - -
2.18.2.2 Operational / Functional
Testing TR: TOs 1A-10A-2-94JG-7, 1A-10C
- 2-94JG-7, 1B-2A-2-94JG-Series, 1B-2A-16CL-1, 1B-2A-16CL-2, 1B-
2A-33-2-1CL-1, 1B-2A-33-2-1CL-2,
1F-15()-2-94FI-00-Series, 1F-15()-2- 94JG-31-Series, 1F-15()-2-94JG-32-
Series, 1F-15()-2--94JG-50-Series, 1F-
16()-2-94JG-30-Series, 1C-130(A)H- 2- 94JG-70-1/-2
- - - B - -
2.18.2.3 Test Equipment - - - B - -
2.18.2.4 Troubleshooting and Fault
Isolation TR: TOs 1A-10A-2-94TS-2, 1A-10C- 2-40TS-9, 1B-1B-94GS-00-1, 1B-
52H-2-31GA-1, 1B-52H-2-38GA-1,
1B-2A-2-94GS-00-1, 1B-2A-2- 94GS-00-2, 1F-15()-2- 94FI-00-
Series, 1F-16()-2-94FI-00-1, 1C-
130(A)U-94FI-50-1, 1C-130(A)H-2- 94FI series
- - - B - -
32 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.18.2.5 Gun Safing and Clearing - - - B - -
2.18.2.6 Gun System Boresighting TR: 1C-130(A)H-2-94JG series,
1C-130(A)U-2-94JG series, 1F-15()-2-94JG-73-1, 1F-16()-2-
94JG-50-3, 1H-60(H)G-112,
11W1-15-18-1
- - - B - -
2.18.3 Aircraft Suspension
Equipment TR: TO 11B29-3-8-3, 11B29-3-21-2,
11B29-3-22-2, 11B29-3-25-2, 11B29-3-25-7, 11B29-3-28-1, 11B29-3-28-2,
11B29-3-28-7, 11B29-3-35-2, 11B29-
3-39-2, 11B29-3-40-2, 11B29-3-52-2, 11B29-3-53-7-1, 11B29-3-55-1,
11B29-3-56-11, 11B29-3-60-2,
11B29-3-61-2, 11B29-3-65-2, 11B29-3-66-1, 11B29-3-70-1, 11B38-2-5-1,
11B40-2-4-3, 11L1-2-10-1, 11L1-2-
10-7-1, 11L1-2-15-1, 11L1-2-15-8, 11L1-2-16-2, 11L1-2-20-1, 11L1-2-
24-2, 11L1-3-27-1, 11L1-3-28-2,
11L1-3-29-2, 11L1-3-30-1, 11LA8-7-3, 11LA8-9-2, 11L1-8-13-1, 11N-
L5002-Series, 11N-5006-1, 11N-
L5006-2, 11N-H5083-1, 11N-H5086-2, 11N-H5088-2
2.18.3.1 Nomenclature and Function of
Parts
- - - B - -
2.18.3.2 Principles of Operations - - - B - -
2.18.4 Weapons Loading Principles TR: TOs 1X-XX-33-X-X, 1X-XX-16
- - - B - -
2.18.5 Concurrent Servicing
Operations / Dual Loading
Operations TR: TOs 1X-XX-33-X-X, 1X-XX-16,
00-25-172, AFI 21-101
- - - B - -
2.19 ELECTRONIC
FUNDAMENTALS TR: TOs 00-25-234, 1-1A-8, 1-1A-14,
31-1-141-1, 31-1-141-2, 31-1-141-3,
31-1-141-4, 31-1-141-5, 31-1-141-7,
31-1-141,8, 31-1-141-9, 31-1-141-10, 31-1-141-13, 31-1-141-15
2.19.1 Basic Terms
* 2.19.1.1 Metric Notation - - - - - -
* 2.19.1.2 DC Terms B - - B - -
* 2.19.1.3 AC Terms B - - B - -
2.19.2 Basic Circuits
* 2.19.2.1 Theory of Operation B - - B - -
* 2.19.2.2 Troubleshoot Circuits 2b - - B - -
2.19.3 Basic Circuits Calculations
2.19.3.1 DC - - - - - -
2.19.3.2 AC - - - - - -
2.19.4 Resistors
* 2.19.4.1 Theory of Operation B - - B - -
* 2.19.4.2 Isolate Faulty Resistors 2b - - - - -
* 2.19.4.3 Color Code A - - - - -
2.19.5 Relays / Solenoids
33 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 2.19.5.1 Theory of Operation B - - B - -
* 2.19.5.2 Isolate Faulty Relays 2b - - - - -
2.19.6 Inductors
2.19.6.1 Theory of Operation - - - - - -
2.19.6.2 Isolate Faulty Inductors - - - - - -
2.19.6.3 Calculations - - - - - -
2.19.7 Capacitors
2.19.7.1 Theory of Operations - - - - - -
2.19.7.2 Isolate Faulty Capacitors - - - - - -
2.19.7.3 Calculations - - - - - -
2.19.7.4 Color Code - - - - - -
2.19.8 Transformers
* 2.19.8.1 Theory of Operations B - - - - -
2.19.8.2 Isolate Faulty Transformers - - - - - -
2.19.8.3 Calculations - - - - - -
2.19.9 Solid State Diodes
* 2.19.9.1 Theory of Operation B - - - - -
* 2.19.9.2 Isolate Faulty Solid State
Diodes
2b - - - - -
2.19.9.3 Specifications - - - - - -
2.19.9.4 Color Code - - - - - -
2.19.10 Bipolar Junction Transistors
2.19.10.1 Theory of Operation - - - - - -
2.19.10.2 Isolate Faulty Transistors - - - - - -
2.19.10.3 Specifications - - - - - -
2.19.11 Integrated Circuits
2.19.11.1 Familiarization - - - - - -
2.19.11.2 Isolate Faulty Integrated
Circuits
- - - - - -
2.19.11.3 Specifications - - - - - -
2.19.12 Solder / Desolder
* 2.19.12.1 Soldering Safety Standards
and Principles
A - - - - -
* 2.19.12.2 Terminal Connections 1b - - - - -
2.19.12.3 PC Boards - - - - - -
2.19.12.4 Multipin Connectors - - - - - -
2.19.12.5 Advanced Soldering
Techniques
- - - - - -
2.19.13 Assemble Solderless
Connectors
2.19.13.1 Crimp - - - - - -
2.19.13.2 Coaxial - - - - - -
2.19.13.3 Multipin - - - - - -
2.19.14 Use Test Equipment
2.19.14.1 Multimeter, Analog - - - - - -
2.19.14.2 Oscilloscope - - - - - -
2.19.14.3 Signal Generator - - - - - -
2.19.14.4 Frequency Counter - - - - - -
* 2.19.14.5 Multimeter, Digital * 3b - - B 3b -
2.19.14.6 Digital Logic Probe - - - - - -
2.19.14.7 Capacitor Tester - - - - - -
34 1 January 2012
1. Tasks 2. Core
Tasks
3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level
7
Level
Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
2.19.14.8 Capacitor Substitution Box - - - - - -
2.19.14.9 Logic Current Tracer - - - - - -
2.19.14.10 Logic Pulser - - - - - -
2.19.14.11 Logic Analyzer - - - - - -
2.19.15 Support Subjects
* 2.19.15.1 Electrical Safety B - - B B -
* 2.19.15.2 First Aid for Electrical Shock A - - B - -
* 2.19.15.3 Electrostatic Sensitive Devices
(ESD)
A - - B B -
2.19.16 Principles of Troubleshooting
2.19.16.1 Troubleshooting - - - - B -
2.19.16.2 Troubleshooting Technical
Data
- - - - B -
2.19.16.3 Schematic Symbols / Wiring
Diagrams
- - - B B -
2.19.16.4 Troubleshoot Electrical Circuit
Malfunctions
- - - - 3b -
2.19.16.5 Isolate Electrical Circuit
Malfunction using Test
Equipment
- - - - 3b -
2.19.17 Wire and Cable Repair
* 2.19.17.1 Type, Size, and Wire Repair
Preparation
B - - B B -
2.19.17.2 Connectors
* 2.19.17.2.1 Description B - - B B -
* 2.19.17.2.2 Replacement Procedures B - - B - -
2.19.17.2.3 Replace Rear-End Connector - - - - 3b -
2.19.17.2.4 Replace RF Connector - - - - - -
* 2.19.17.2.5 Replace Coaxial Cable
Connector
2b - - - 3b -
2.19.17.2.6 Replace Triaxial Cable
Connector
- - - - 3b -
* 2.19.17.3 Chafing Prevention B - - B 2b -
2.19.17.4 Flat Cable Repair - - - - - -
* 2.19.17.5 Wire Bundle Repair 2b - - - 3b -
2.19.17.6 MIL-STD-1760 Cable Repair
2.19.17.6.1 Characteristics - - - B - -
2.19.17.6.2 Assemble Multiple
Component Pin
- - - - 1b -
2.19.17.6.3 Splice Braided Shield - - - B - -
A-10 Aircraft
35 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3 A-10 AIRCRAFT
3.1 Aerospace Ground Equipment TR: TOs 11-1-38, 33A2-2-27-11,
33A2-2-30-111, 34Y1-87-11, 35C2-3-
304-1, 35C2-3-372-1, 35C2-3-372-11,
35C2-3-372-14, 35C2-3-469-2, 35C2-3-469-11, 35C2-3-469-12, 35C2-3-
469-14, 35D3-2-25-1, 35D3-2-26-1,
35D3-2-27-1, 35D3-2-27-6WC-1, 35D3-2-27-21, 35D3-9-23-1, 35D5-3-
8-31, 35E9-90-11, 35F5-5-11-22,
35F5-5-11-31, 35F5-5-16-1
* 3.1.1 Description A - B - -
3.1.2 MJ-1 Aerial Stores Lift Truck
* 3.1.2.1 Inspect 1b - - - - -
* 3.1.2.2 Operate 1b - - - - -
* 3.1.2.3 Drive 1b - - - - -
3.1.3 MHU-83 Munitions Handling /
Loading Lift Truck
* 3.1.3.1 Inspect 3b - - - - -
* 3.1.3.2 Operate 3b - - - - -
* 3.1.3.3 Drive 3b - - - - -
3.1.4 MHU-114/E
3.1.4.1 Inspect - - - - - -
3.1.4.2 Maintain - - - - - -
3.1.4.3 Use - - - - - -
3.1.5 Munitions Handling Trailers
* 3.1.5.1 Inspect 1b - - B - -
* 3.1.5.2 Load / Unload 1b - - - - -
3.1.5.3 Tie-Down Procedures - - - - - -
3.1.6 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
3.1.6.1 Inspect - - - - - -
3.1.6.2 Maintain - - - - - -
3.1.7 ADU-537A/E Missile-
Munitions Loading Adapter
3.1.7.1 Inspect - - - - - -
3.1.7.2 Maintain - - - - - -
3.1.7.3 Operate - - - - - -
3.1.8 A/M32A-60 Generator Set
3.1.8.1 Inspect - - - - - -
3.1.8.2 Operate - - - - - -
3.1.9 A/M32A-85 Generator Set
3.1.9.1 Inspect - - - - - -
3.1.9.2 Operate - - - - - -
3.1.10 A/M32A-86 Generator Set
* 3.1.10.1 Inspect 1b - - - - -
* 3.1.10.2 Operate 1b - - - - -
3.1.11 Hydraulic Test Stand
3.1.11.1 Inspect - - - - - -
3.1.11.2 Operate - - - - - -
3.1.12 TF-1 Floodlight Set
3.1.12.1 Inspect - - - - - -
3.1.12.2 Operate - - - - - -
A-10 Aircraft
36 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.1.13 FL-1D Floodlight Set
3.1.13.1 Inspect - - - - - -
3.1.13.2 Operate - - - - - -
3.2 Aircraft Familiarization TR: TOs 1A-10A-2-1-1, 1A-10A-33-
1-2, 1A-10C-2-1-1, , 1A-10C-33-1-2, 1A-10C-40TS-9, AFMAN 91-201
* 3.2.1 Aircraft Safety Devices B - - - - -
* 3.2.2 Aircraft Danger Areas B - - - - -
* 3.2.3 Aircraft Switches, Controls,
and Indicators
B - - - - -
* 3.2.4 Perform Aircraft Safe for
Maintenance Procedures
F 3b - - - - -
* 3.2.5 Apply / Remove External
Electrical Power
1b - - - - -
3.2.6 Aircraft Exterior Panels
* 3.2.6.1 Remove 1b - - - - -
* 3.2.6.2 Install 1b - - - - -
3.3 Gun System TR: TOs 1A-10A-2-1-1, 1A-10A-2-
94JG-6, 1A-10A-2-94JG-7, 1A-10A-2-94JG-8, 1A-10A-2-94TS-2, 1A-10A-
23, 1A-10A-33-1-2, 1A-10C-2-1-1,
1A-10C-2-94JG-6, 1A-10C-2-94JG-7, 1A-10C-2-94JG-8, 1A-10C-2-40TS-2,
1A-10C-23, 1A-10C-33-1-2, 11W1-
12-10-2, 11W1-7-14-2, 11W1-28-8-2, 33D5-12-212-1
* 3.3.1 Nomenclature A - - - - -
* 3.3.2 Function of Parts A - - - - -
* 3.3.3 Theory of Operation A - - - - -
* 3.3.4 Gun System Stoppages (Jam) * A - - - - -
* 3.3.5 Perform Gun Safing and
Clearing
F 3b - - - - -
3.3.6 Perform Gun System Checks
* 3.3.6.1 Operational 1b - - - - -
* 3.3.6.2 Functional 1b - - - - -
* 3.3.6.3 Electrical 1b - - - - -
3.3.7 Gun System Compartment
3.3.7.1 Clean - - - - - -
3.3.7.2 Inspect - - - - - -
3.3.8 Gun Support Equipment
3.3.8.1 Inspect - - - - - -
3.3.8.2 Use - - - - - -
3.3.8.3 Maintain - - - - - -
3.3.9 GAU-8/A Gun
* 3.3.9.1 Nomenclature B - - - - -
* 3.3.9.2 Function of Parts B - - - - -
* 3.3.9.3 Theory of Operation B - - - - -
* 3.3.9.4 Remove 1b - - - - -
* 3.3.9.5 Disassemble 1b - - - - -
* 3.3.9.6 Inspect 1b - - - - -
3.3.9.7 Repair - - - - - -
* 3.3.9.8 Assemble 1b - - - - -
A-10 Aircraft
37 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 3.3.9.9 Install 1b - - - - -
3.3.10 Ammunition Drum Assembly
* 3.3.10.1 Remove 1b - - - - -
* 3.3.10.2 Disassemble 1b - - - - -
* 3.3.10.3 Inspect 1b - - - - -
3.3.10.4 Repair - - - - - -
* 3.3.10.5 Assemble 1b - - - - -
* 3.3.10.6 Install 1b - - - - -
3.3.11 Conveyor Assembly
* 3.3.11.1 Remove 1b - - - - -
3.3.11.2 Disassemble - - - - - -
3.3.11.3 Inspect - - - - - -
3.3.11.4 Repair - - - - - -
3.3.11.5 Assemble - - - - - -
* 3.3.11.6 Install 1b - - - - -
3.3.12 Gun Barrels
3.3.12.1 Remove - - - - - -
3.3.12.2 Inspect - - - - - -
3.3.12.3 Install - - - - - -
3.3.13 Hydraulic Drive Assembly
* 3.3.13.1 Remove 1b - - - - -
3.3.13.2 Disassemble - - - - - -
3.3.13.3 Inspect - - - - - -
3.3.13.4 Repair - - - - - -
3.3.13.5 Assemble - - - - - -
* 3.3.13.6 Install 1b - - - - -
3.3.14 Entrance / Exit Unit
3.3.14.1 Remove - - - - - -
3.3.14.2 Disassemble - - - - - -
3.3.14.3 Inspect - - - - - -
3.3.14.4 Repair - - - - - -
3.3.14.5 Assemble - - - - - -
3.3.14.6 Install - - - - - -
3.3.15 Turnaround / Transfer Unit
3.3.15.1 Remove - - - - - -
3.3.15.2 Disassemble - - - - - -
3.3.15.3 Inspect - - - - - -
3.3.15.4 Repair - - - - - -
3.3.15.5 Assemble - - - - - -
3.3.15.6 Install - - - - - -
3.3.16 Access Unit
* 3.3.16.1 Remove 1b - - - - -
3.3.16.2 Disassemble - - - - - -
3.3.16.3 Inspect - - - - - -
3.3.16.4 Repair - - - - - -
3.3.16.5 Assemble - - - - - -
* 3.3.16.6 Install 1b - - - - -
3.3.17 Tension Equalizer
3.3.17.1 Remove - - - - - -
3.3.17.2 Disassemble - - - - - -
3.3.17.3 Inspect - - - - - -
A-10 Aircraft
38 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.3.17.4 Repair - - - - - -
3.3.17.5 Assemble - - - - - -
3.3.17.6 Install - - - - - -
3.3.18 Guide Bar Checking Fixture
3.3.18.1 Inspect - - - - - -
3.3.18.2 Operate - - - - - -
3.3.19 Transfer / Turnaround
Checking Fixture
3.3.19.1 Inspect - - - - - -
3.3.19.2 Operate - - - - - -
3.3.20 Entrance / Exit Unit Checking
Fixture
3.3.20.1 Inspect - - - - - -
3.3.20.2 Operate - - - - - -
3.3.21 Conveyor Element Checking
Fixture
3.3.21.1 Inspect - - - - - -
3.3.21.2 Operate - - - - - -
3.4 Ammunition Loading
Assembly (ALA) TR: TOs 35DA15-7-3, 35D30-4-12-2
* 3.4.1 Nomenclature A - - - - -
* 3.4.2 Function of Parts A - - - - -
* 3.4.3 Cycle of Operation A - - - - -
3.4.4 Disassemble - - - - - -
* 3.4.5 Inspect 1b - - - - -
3.4.6 Assemble - - - - - -
3.4.7 Maintain - - - - - -
* 3.4.8 Use 1b - - - - -
3.5 Auxiliary Drive Assembly
3.5.1 Nomenclature - - - - - -
3.5.2 Theory Of Operation - - - - - -
3.5.3 Inspect - - - - - -
3.5.4 Maintain - - - - - -
3.5.5 Use - - - - - -
3.6 Stores Suspension Equipment TR: TOs 1A-10A-2-94JG Series, 1A-
10A-6, 1A-10C-2-94JG Series, 1A-
10C-6, 11B29-3-35-2, 11B29-3-39-2,
11B29-3-40-2, 11L1-2-10-1, 11L1-2-15-1, 11L1-2-29-2, 11L1-3-27-1,
16W6-28-2, 16W6-28-12, 16W6-28-
22, 16W6-28-32, 16W6-28-42, 16W6-
28-52, 35D-1-281
* 3.6.1 Nomenclature A - - - - -
* 3.6.2 Function of Parts A - - - - -
* 3.6.3 Theory of Operation A - - - - -
3.6.4 Pylons
* 3.6.4.1 Remove 1b - - - - -
3.6.4.2 Disassemble - - - - - -
3.6.4.3 Inspect - - - - - -
3.6.4.4 Repair - - - - - -
3.6.4.5 Assemble - - - - - -
A-10 Aircraft
39 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 3.6.4.6 Install 1b - - - - -
3.6.5 MAU-40 Bomb Rack
3.6.5.1 Remove - - - - - -
* 3.6.5.2 Disassemble B 2b - - - - -
* 3.6.5.3 Inspect B 2b - - - - -
3.6.5.4 Repair - - - - - -
* 3.6.5.5 Assemble B 2b - - - - -
3.6.5.6 Install - - - - - -
3.6.5.7 Perform Functional Check with
Analog Preload Circuit Test
Set (PN 160D998560-1)
- - - - - -
* 3.6.5.8 Perform Functional Check with
Digital Preload Circuit Test Set
(PN A10998560-1)
2b - - - - -
* 3.6.5.9 Perform Bench Check with
MAU-12/40/50 Test Set
2b - - - - -
* 3.6.5.10 Perform Weight Check with
Proofload Tester
1b - - - - -
3.6.6 MAU-50 Bomb Rack
* 3.6.6.1 Remove 2b - - - - -
3.6.6.2 Disassemble - - - - - -
3.6.6.3 Inspect - - - - - -
3.6.6.4 Repair - - - - - -
3.6.6.5 Assemble - - - - - -
* 3.6.6.6 Install 2b - - - - -
3.6.6.7 Perform Functional Check with
Analog Preload Circuit Test
Set
- - - - - -
3.6.6.8 Perform Functional Check with
Digital Preload Circuit Test Set
- - - - - -
3.6.6.9 Perform Bench Check with
MAU-12/40/50 Test Set
- - - - - -
3.6.6.10 Perform Weight Check with
Proofload Tester
- - - - - -
3.6.7 LAU-88 Missile Launcher
3.6.7.1 Remove - - - - - -
3.6.7.2 Disassemble - - - - - -
3.6.7.3 Inspect - - - - - -
3.6.7.4 Repair - - - - - -
3.6.7.5 Assemble - - - - - -
3.6.7.6 Install - - - - - -
3.6.7.7 Perform Functional Check with
the ARM-136/DSM-157
- - - - - -
3.6.8 LAU-117 Missile Launcher
* 3.6.8.1 Remove 1b - - - - -
3.6.8.2 Disassemble B - - - - - -
3.6.8.3 Inspect B - - - - - -
3.6.8.4 Repair - - - - - -
3.6.8.5 Assemble B - - - - - -
* 3.6.8.6 Install 1b - - - - -
3.6.8.7 Perform Functional Check with
the ARM-136/DSM-157
- - - - - -
A-10 Aircraft
40 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.6.9 LAU-105 Missile Launcher
* 3.6.9.1 Remove 1b - - - - -
* 3.6.9.2 Disassemble 2b - - - - -
* 3.6.9.3 Inspect 2b - - - - -
3.6.9.4 Repair - - - - - -
* 3.6.9.5 Assemble 2b - - - - -
* 3.6.9.6 Install 1b - - - - -
* 3.6.9.7 Perform Functional Check with
the MLS Test Set
1b - - - - -
* 3.6.9.8 Perform Functional Check with
the Control Test Set
1b - - - - -
3.6.9.9 Perform Detent Test 1b - - - - -
3.6.10 Dual Rail Adapter
* 3.6.10.1 Remove 1b - - - - -
3.6.10.2 Disassemble - - - - - -
3.6.10.3 Inspect - - - - - -
3.6.10.4 Repair - - - - - -
3.6.10.5 Assemble - - - - - -
* 3.6.10.6 Install 1b - - - - -
3.6.10.7 Perform Functional Check with
the Control Test Set
- - - - - -
3.6.11 Triple Ejector Rack (TER)
* 3.6.11.1 Remove 2b - - - - -
* 3.6.11.2 Disassemble 2b - - - - -
* 3.6.11.3 Inspect 2b - - - - -
3.6.11.4 Repair - - - - - -
* 3.6.11.5 Assemble 2b - - - - -
* 3.6.11.6 Install 2b - - - - -
3.6.11.7 Perform Functional Check with
Analog Preload Circuit Test
Set
- - - - - -
* 3.6.11.8 Perform Functional Check with
Digital Preload Circuit Test Set
1b - - - - -
3.6.11.9 Perform Functional Check with
MER / TER / BRU-3 Test Set
- - - - - -
3.6.11.10 Perform Weight Check with
Proofload Tester
- - - - - -
3.6.12 LAU-131 Rocket Launcher
* 3.6.12.1 Remove 1b - - - - -
3.6.12.2 Disassemble - - - - - -
3.6.12.3 Inspect - - - - - -
3.6.12.4 Repair - - - - - -
3.6.12.5 Assemble - - - - - -
* 3.6.12.6 Install 1b - - - - -
3.6.12.7 Perform Functional Check with
Analog Preload Circuit Test
Set
- - - - - -
3.6.12.8 Perform Functional Check with
Digital Preload Circuit Test Set
- - - - - -
3.6.12.9 Perform Functional Check with
MK-III / MK-IV Test Set /
Multimeter
- - - - - -
A-10 Aircraft
41 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.6.13 SUU-25 Dispenser
3.6.13.1 Remove - - - - - -
3.6.13.2 Install - - - - - -
3.6.13.3 Perform Functional Check with
Analog Preload Circuit Test
Set
- - - - - -
3.6.13.4 Perform Functional Check with
Digital Preload Circuit Test Set
- - - - - -
3.7 Perform Basic Post-Flight
Inspections TR: TO 1A-10A-6, 1A-10C-6
3.7.1 Gun - - - - - -
3.7.2 MAU-40 / 50 Bomb Rack - - - - - -
3.7.3 TER - - - - - -
3.7.4 LAU-88 Launcher - - - - - -
3.7.5 LAU-117 Launcher - - - - - -
3.7.6 LAU-105 Launcher - - - - - -
3.7.7 LAU-131 Launcher - - - - - -
3.8 Armament System
Components TR: TOs 8R3-166-2, 11B29-3-35-2,
11B29-3-39-2, 11B29-3-40-2, 11F13-
29-7-2, 11L1-2-10-1, 11L1-2-15-1, 11L1-2-22-1, 11L1-2-29-2, 11L1-3-
27-1, 11W1-27-7-2, 33D5-12-211-1,
33D5-12-212-1, 33D5-12-213-1, 33D5-12-218-1, 33D5-53-13-1, 33D9-
45-28-1, 33D9-54-62-1, 33D9-61-39-
1, 1A-10C-2-40TS-7-8-1, 1A-10C-2-94JG-7, 1A-10C-2-94JG-10
3.8.1 Component Functions - - - - - -
3.8.2 Station Control Units
3.8.2.1 Remove - - - - - -
3.8.2.2 Repair - - - - - -
3.8.2.3 Install - - - - - -
3.8.2.4 Perform LRU Fault Isolation - - - - - -
3.8.2.5 Perform LRU Checks using the
Control Test Set
- - - - - -
3.8.3 Digital Data Processing Unit
* 3.8.3.1 Remove b - - - - -
3.8.3.2 Repair - - - - - -
* 3.8.3.3 Install b - - - - -
3.8.3.4 Perform LRU Fault Isolation - - - - - -
3.8.3.5 Perform LRU Checks using the
Control Test Set
- - - - - -
3.8.4 Gun Electronic Control Unit
3.8.4.1 Remove - - - - - -
3.8.4.2 Repair - - - - - -
3.8.4.3 Install - - - - - -
3.8.4.4 Perform LRU Fault Isolation - - - - - -
3.8.4.5 Perform Electrical Check with
the A/E24T-138 Test Set
- - - - - -
3.8.5 Guided Missile Interface Unit
3.8.5.1 Remove - - - - - -
A-10 Aircraft
42 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.8.5.2 Repair - - - - - -
3.8.5.3 Install - - - - - -
3.8.5.4 Perform LRU Fault Isolation - - - - - -
3.8.5.5 Perform LRU Checks using the
Control Test Set
- - - - - -
3.8.6 Armament Relay Box
3.8.6.1 Remove - - - - - -
3.8.6.2 Repair - - - - - -
3.8.6.3 Install - - - - - -
3.8.6.4 Perform LRU Fault Isolation - - - - - -
3.8.7 Armament Circuit Breaker
Panel
3.8.7.1 Remove - - - - - -
3.8.7.2 Install - - - - - -
3.8.8 Electrical Test Panel
3.8.8.1 Remove - - - - - -
3.8.8.2 Install - - - - - -
3.8.8.3 Perform LRU Checks using the
Control Test Set
- - - - - -
3.8.9 Central Interface Control Unit
* 3.8.9.1 Remove b - - - - -
* 3.8.9.2 Install b - - - - -
* 3.8.9.3 Perform Operational Checkout
(BIT) using Portable
Automated Test Stations
(PATS)
1b - - - - -
3.8.10 1760 Relay Box
3.8.10.1 Remove - - - - - -
3.8.10.2 Install - - - - - -
3.8.10.3 Perform Operational Checkout
using PATS
- - - - - -
3.8.11 Armament HUD Control Panel
(AHCP)
3.8.11.1 Remove - - - - - -
3.8.11.2 Install - - - - - -
3.8.11.3 Perform Operational Checkout
using PATS
- - - - - -
3.8.12 Multi-Functional Color
Display (MFCD)
3.8.12.1 Remove - - - - - -
3.8.12.2 Install - - - - - -
3.8.12.3 Perform Operational Checkout
(BIT)
- - - - - -
3.8.13 Control Display Unit (CDU)
3.8.13.1 Operate - - - - - -
3.8.13.2 Perform Start up BIT - - - - - -
3.8.14 Hands-On Throttle and Stick
(HOTAS)
- - - - - -
3.8.15 Operational Flight Program
(OFP)
3.8.15.1 Upload using PATS - - - - - -
A-10 Aircraft
43 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.8.15.2 Remove - - - - - -
3.8.15.3 Perform Operational Checkout
using PATS
- - - - - -
3.8.16 Portable Automated Test
Station (PATS)
* 3.8.16.1 Perform Maverick Interface
Station Checkout
1b - - - - -
* 3.8.16.2 Perform 1760 Cable Checkout 1b - - - - -
* 3.8.16.3 Perform Weapons Station
Checkout
1b - - - - -
3.9 Test Equipment TR: 33D5-53-1-111, 35D5-12-211-1,
33D9-45-28-1, 35D9-54-62-1, 33D5-
12-229-1, 33D5-12-218-1, 33D5-57-3-1, 33D5-57-4-1, 33D5-20-31-3,
11B29-3-35-2, 33D7-50-662-11,
33D7-50-662-1, 33D9-54-7-42, 33D5-53-13-1, 1A-10C-2-40MS-1
3.9.1 Description - - - - - -
3.9.2 Familiarization
* 3.9.2.1 MAU-12 / 40 / 50 Test Set A - - - - -
* 3.9.2.2 A/E24T-138 Test Set A - - - - -
3.9.2.3 DSM-157 / ARM136 - - - - - -
* 3.9.2.4 Control Test Set A - - - - -
3.9.2.5 Armament Control System
Interface Test Set
- - - - - -
3.9.2.6 MK-III / MK-IV Test Set - - - - - -
* 3.9.2.7 Missile Launch System Test
Set (MLSTS)
A - - - - -
3.9.2.8 MER / TER / BRU-3 Test Set - - - - - -
3.9.2.9 Analog Preload Circuit Test
Set (PN 160D998560-1)
- - - - - -
* 3.9.2.10 Digital Preload Circuit Test Set
(PN A10998560-1)
A - - - - -
3.9.2.11 Detent Tester A - - - - -
* 3.9.2.12 Proofload Tester A - - - - -
* 3.9.2.13 Portable Automated Test
Station (PATS)
A - - - - -
3.9.3 Inspect
* 3.9.3.1 MAU-12 / 40 / 50 Test Set 1a - - - - -
* 3.9.3.2 A/E24T-138 Test Set 1a - - - - -
3.9.3.3 DSM-157 / ARM136 - - - - - -
* 3.9.3.4 Control Test Set 1a - - - - -
3.9.3.5 Armament Control System
Interface Test Set
- - - - - -
3.9.3.6 MK-III / MK-IV Test Set - - - - - -
* 3.9.3.7 Missile Launch System Test
Set (MLSTS)
1a - - - - -
3.9.3.8 MER / TER / BRU-3 Test Set - - - - - -
3.9.3.9 Analog Preload Circuit Test
Set
- - - - - -
* 3.9.3.10 Digital Preload Circuit Test Set 1a - - - - -
3.9.3.11 Detent Tester 1a - - - - -
A-10 Aircraft
44 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 3.9.3.12 Proofload Tester 1a - - - - -
* 3.9.3.13 PATS 1a - - - - -
3.9.4 Maintain
3.9.4.1 MAU-12 / 40 / 50 Test Set - - - - - -
3.9.4.2 A/E24T-138 Test Set - - - - - -
3.9.4.3 DSM-157 / ARM136 - - - - - -
3.9.4.4 Control Test Set - - - - - -
3.9.4.5 Armament Control System
Interface Test Set
- - - - - -
3.9.4.6 MK-III / MK-IV Test Set - - - - - -
3.9.4.7 Missile Launch System Test
Set (MLSTS)
- - - - - -
3.9.4.8 MER / TER / BRU-3 Test Set - - - - - -
3.9.4.9 Analog Preload Circuit Test
Set
- - - - - -
3.9.4.10 Digital Preload Circuit Test Set - - - - - -
3.9.4.11 Detent Tester - - - - - -
3.9.4.12 Proofload Tester - - - - - -
3.9.4.13 PATS - - - - - -
3.9.5 Repair
3.9.5.1 MAU-12 / 40 / 50 Test Set - - - - - -
3.9.5.2 A/E24T-138 Test Set - - - - - -
3.9.5.3 DSM-157 / ARM136 - - - - - -
3.9.5.4 Control Test Set - - - - - -
3.9.5.5 Armament Control System
Interface Test Set
- - - - - -
3.9.5.6 MK-III / MK-IV Test Set - - - - - -
3.9.5.7 Missile Launch System Test
Set (MLSTS)
- - - - - -
3.9.5.8 MER / TER / BRU-3 Test Set - - - - - -
3.9.5.9 Analog Preload Circuit Test
Set
- - - - - -
3.9.5.10 Digital Preload Circuit Test Set - - - - - -
3.9.5.11 Detent Tester - - - - - -
3.9.5.12 Proofload Tester - - - - - -
3.9.5.13 PATS - - - - - -
3.10 Fault Isolation Procedures TR: 1A-10-2-94TS-1, 1A-10A-2-
94TS-2, 1A-10A-2-110-1, 1A-10C-2-
40TS-7-8-1
* 3.10.1 Principles of Troubleshooting A - - - - -
* 3.10.2 Use Fault Isolation Technical
Orders
1a - - - - -
* 3.10.3 Use Schematics / Wiring
Diagrams
1a - - - - -
* 3.10.4 Troubleshoot Circuits 1a - - - - -
3.10.5 Use Interface Test Set - - - - - -
3.10.6 Troubleshoot 1760 Weapons
Stations
3.10.7 Repair 1760 BUS including
Data Bus Couplers (DBC)
- - - - - -
A-10 Aircraft
45 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
3.11 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1A-10A-6, 1A-
10A-33-1-2, 1A-10C-6, 1A-10C-33-1-
2, AFMAN 91-201
* 3.11.1 Characteristics A - - B - -
* 3.11.2 Load Nonnuclear F 1b - - - - -
* 3.11.3 Unload Nonnuclear F 1b - - - - -
46 1 January 2012
THIS PAGE INTENTIONALLY LEFT BLANK
B-1 Aircraft
47 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
4 B-1 AIRCRAFT
4.1 Aerospace Ground Equipment TR: TO 1B-1B-2-94GS-00-1, 1B-1B-
2-94JG-30-3, 11-1-38, 11N-H5083-1,
11N-H5083-1CL-1, 11N-H5083-2,
11N-H5089-2, 33D3-2-26-1, 33D3-2-27-1, 33D3-2-27-6WC-2, 35A4-2-60-
1, 35C2-3-469-2, 35D3-9-21-1, 35D3-
9-29-A, 35D5-3-8-41, 35W3-6-22-1
* 4.1.1 Description A - - B - -
4.1.2 Accessories - - - B - -
4.1.3 MJ-40 Bomb Lift Truck
* 4.1.3.1 Inspect 1b - - - - -
* 4.1.3.2 Operate 1b - - - - -
* 4.1.3.3 Drive 1b - - - - -
4.1.3.4 Ram Assembly
* 4.1.3.4.1 Inspect Ram 1b - - - - -
4.1.3.4.2 Install Ram - - - - - -
4.1.3.4.3 Remove Ram - - - - - -
4.1.4 A/M32A-86 Generator Set
* 4.1.4.1 Inspect 2b - - - - -
* 4.1.4.2 Operate 2b - - - - -
4.1.5 Munitions Handling Trailers
* 4.1.5.1 Inspect 1b - - - - -
* 4.1.5.2 Load / Unload 1b - - - - -
4.1.5.3 Tie-Down Procedures - - - - - -
4.1.6 MHU-196/M Trailer
* 4.1.6.1 Inspect 2b - - - - -
* 4.1.6.2 Operate 2b - - - - -
* 4.1.6.3 Mate / Demate 2b - - - - -
4.1.7 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
4.1.7.1 Inspect - - - - - -
4.1.7.2 Maintain - - - - - -
4.1.8 Split Deck Maintenance
Platform
* 4.1.8.1 Inspect 3b - - - - -
* 4.1.8.2 Operate 3b - - - - -
4.1.9 Launcher Loader Adapter
* 4.1.9.1 Inspect 2b - - - - -
* 4.1.9.2 Operate 2b - - - - -
4.1.9.3 Maintain - - - - - -
4.1.10 Launcher / Module Handling
Adapter
* 4.1.10.1 Inspect 1b - - - - -
* 4.1.10.2 Operate 1b - - - - -
4.1.11 MHU-83 Munitions
Handling/Loading Lift Truck
* 4.1.11.1 Inspect 3b - - - - -
* 4.1.11.2 Operate 3b - - - - -
* 4.1.11.3 Drive 3b - - - - -
4.1.12 TR-1 Floodlight Set
4.1.12.1 Inspect - - - - - -
B-1 Aircraft
48 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
4.1.12.2 Operate - - - - - -
4.1.13 FL-1D Floodlight Set
4.1.13.1 Inspect - - - - - -
4.1.13.2 Operate - - - - - -
4.1.14 T-Bar Adapter
4.1.14.1 Inspect - - - - - -
4.1.14.2 Operate - - - - - -
4.1.15 EPU-5/E
4.1.15.1 Inspect - - - - - -
4.1.15.2 Operate - - - - - -
4.1.16 EPU-6/E
4.1.16.1 Inspect - - - - - -
4.1.16.2 Operate - - - - - -
4.1.17 Overhead Hoist
4.1.17.1 Inspect - - - - - -
4.1.17.2 Operate - - - - - -
4.1.18 Sling Consolidated Group II
4.1.18.1 Inspect - - - - - -
4.1.18.2 Maintain - - - - - -
4.1.18.3 Sling CBM - - - - - -
4.1.18.4 Sling MPRL - - - - - -
4.1.19 MXU-690/E Cooling Control
Unit
4.1.19.1 Maintain - - - - - -
4.1.19.2 Calibrate - - - - - -
4.1.20 Air Flow Cooling Monitor
4.1.20.1 Maintain - - - - - -
4.1.20.2 Calibrate - - - - - -
4.2 Aircraft Familiarization TR: TOs 1B-1B-2-05GS-00-1, 1B-1B-
2-05JG-20-1, 1B-1B-2-46JG-30-1,
1B-1B-2-94GS-00-Series, 1B-1B-2-95JG-00-1, 1B-1B-2-94JG-10-1
* 4.2.1 Aircraft Safety Devices B - - - - -
* 4.2.2 Aircraft Danger Areas B - - - - -
* 4.2.3 Stores Management System A - - - - -
* 4.2.4 Hardness Critical Procedures
(HCP)
A - - - - -
* 4.2.5 CITS A - - - - -
* 4.2.6 Perform Aircraft Safe for
Maintenance Procedures
F 1b - - - - -
4.2.7 Remove / Apply Aircraft
Power / Cooling Air (Non-
CASS)
- - - - - -
4.2.8 Remove / Apply Aircraft
Power / Cooling Air (CASS)
- - - - - -
4.3 Stores Suspension Equipment TR: TOs 1B-1B-2-94JG-30-Series,
1B-1B-33-2-1, 11B29-3-55-1, 11B29-3-56-11, 11B29-3-65-2, 11B29-3-73-
1, 11N-L5002-Series, 11N-H5083-1,
11N-H5086-2
* 4.3.1 Description A - - - - -
B-1 Aircraft
49 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 4.3.2 Theory of Operation A - - - - -
* 4.3.3 Function of Parts A - - - - -
4.3.4 Sniper Pylon TR: TO 1-1b-2-94JG-30-11, 16-W6-
30-3
4.3.4.1 Remove - - - - - -
4.3.4.2 Inspect - - - - - -
4.3.4.3 Repair - - - - - -
4.3.4.4 Install - - - - - -
4.3.5 Conventional Rotary Launcher
(LAU-144/A -180 Inch)
* 4.3.5.1 Remove from Aircraft 1b - - - - -
* 4.3.5.2 Disassemble 1b - - - - -
* 4.3.5.3 Inspect 1b - - - - -
4.3.5.4 Repair - - - - - -
* 4.3.5.5 Assemble 1b - - - - -
* 4.3.5.6 Install on Aircraft 1b - - - - -
* 4.3.5.7 Perform Functional Check
with 750 Test Set
1b - - - - -
* 4.3.5.8 Perform End of Firing Day
Inspection
3b - - - - -
* 4.3.5.9 Perform Rotary Launcher
Weapons/Bay Status Check
1b - - - - -
4.3.5.10 Perform 60-Day Flush - - - - - -
4.3.5.11 Hoist with Consolidated Sling
Assembly
- - - - - -
4.3.6 Conventional Bomb Module
* 4.3.6.1 Remove from Aircraft 1b - - - - -
* 4.3.6.2 Disassemble 1b - - - - -
* 4.3.6.3 Inspect 1b - - - - -
4.3.6.4 Repair - - - - - -
* 4.3.6.5 Assemble 1b - - - - -
* 4.3.6.6 Install on Aircraft 1b - - - - -
* 4.3.6.7 Perform Functional Check
with 750 Test Set
1b - - - - -
* 4.3.6.8 Perform End of Firing Day
Inspection
3b - - - - -
* 4.3.6.9 Perform Bomb Module
Weapons/Bay Status Check
1b - - - - -
4.3.6.10 Perform 60 Day Flush - - - - - -
4.3.6.11 Hoist with Consolidated Sling
Assembly
- - - - - -
4.3.7 MAU-12
4.3.7.1 Remove - - - - - -
4.3.7.2 Disassemble - - - - - -
4.3.7.3 Inspect - - - - - -
4.3.7.4 Repair - - - - - -
4.3.7.5 Assemble - - - - - -
4.3.7.6 Install - - - - - -
4.3.7.7 Perform Bench Check with
MAU-12/40/50
- - - - - -
B-1 Aircraft
50 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 4.3.7.8 Perform Weight Check with
Proofload Tester
1b - - - - -
4.3.8 14 Inch Ejector Rack
* 4.3.8.1 Remove 2b - - - - -
* 4.3.8.2 Disassemble B 1b - - - - -
* 4.3.8.3 Inspect B 1b - - - - -
4.3.8.4 Repair - - - - - -
* 4.3.8.5 Assemble B 1b - - - - -
* 4.3.8.6 Install 2b - - - - -
* 4.3.8.7 Perform Functional Check 1b - - - - -
4.3.9 30 Inch Ejector Rack
* 4.3.9.1 Remove 2b - - - - -
4.3.9.2 Disassemble B - - - - - -
* 4.3.9.3 Inspect B 1b - - - - -
4.3.9.4 Repair - - - - - -
4.3.9.5 Assemble B - - - - - -
* 4.3.9.6 Install 2b - - - - -
* 4.3.9.7 Perform Functional Check 1b - - - - -
4.3.10 BRU-61
4.3.10.1 Remove - - - - - -
4.3.10.2 Disassemble - - - - - -
4.3.10.3 Inspect - - - - - -
4.3.10.4 Repair - - - - - -
4.3.10.5 Assemble - - - - - -
4.3.10.6 Install - - - - - -
4.3.10.7 Perform Bench Check with
AN/GYQ-79 Test Set
- - - - - -
4.3.10.8 Perform Basic Post Flight
Inspection
- - - - - -
4.4 Stores Management System
Components TR: TOs 1B-1B-33-2-1, 1B-1B-2-
34JG-60-2, 1B-1B-2-40JG-00-1, 1B-1B-2-40JG-94-1, 1B-1B-2-94JG-10-1
* 4.4.1 Component Functions A - - - - -
* 4.4.2 Perform Fault Isolation
Procedures
1b - - - - -
4.4.3 Pilot Stores Panel
* 4.4.3.1 Remove a - - - - -
* 4.4.3.2 Install a - - - - -
* 4.4.3.3 Perform Weapons System
Ground Readiness Check
1b - - - - -
4.4.4 Pilot Stores Jettison Panel
* 4.4.4.1 Remove a - - - - -
* 4.4.4.2 Install a - - - - -
* 4.4.4.3 Perform Weapons System
Ground Readiness Check
1b - - - - -
4.4.5 Stores Management System
Panel
* 4.4.5.1 Remove a - - - - -
* 4.4.5.2 Install a - - - - -
B-1 Aircraft
51 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 4.4.5.3 Perform Weapons System
Ground Readiness Check
1b - - - - -
4.4.6 ACU
4.4.6.1 Load ACU from PCMCIA - - - - - -
4.4.6.2 Load ACU from DTU - - - - - -
* 4.4.6.3 Load ACU from MSD 1b - - - - -
4.5 Weapons Bay
* 4.5.1 Perform Operational Mode
Checkout
1 - - - - -
* 4.5.2 Perform Fault Isolation 1b - - - - -
4.6 Weapons Bay Components TR: TOs 1B-1B-2-94JG-90-Series
* 4.6.1 Component Characteristics A - - - - -
4.6.2 Perform Fault Isolation - - - - - -
4.6.3 Proximity Switch
4.6.3.1 Remove - - - - - -
4.6.3.2 Install - - - - - -
4.6.3.3 Perform Operational Checkout - - - - - -
4.6.4 Proximity Switch Electrical
Package
4.6.4.1 Remove - - - - - -
4.6.4.2 Install - - - - - -
4.6.4.3 Perform Operational Checkout - - - - - -
4.6.5 Launcher Drive Electrical
Controller Assembly
4.6.5.1 Remove - - - - - -
4.6.5.2 Install - - - - - -
4.6.5.3 Perform Operational Checkout - - - - - -
4.6.6 Launcher Drive
* 4.6.6.1 Perform Operational Checkout 1b - - - - -
4.6.7 Armament Ground Control
Panel
4.6.7.1 Remove - - - - - -
4.6.7.2 Install - - - - - -
4.6.7.3 Perform Operational Checkout - - - - - -
4.7 Weapons Bay Door TR: TOs 1B-1B-2-94JG-90 Series
* 4.7.1 Perform Operational Checkout 1b - - - - -
* 4.7.2 Operate Manually 2b - - - - -
* 4.7.3 Operate Electrically 2b - - - - -
4.8 Chaff / Flare Dispensers
4.8.1 Maintain Modules - - - - - -
4.8.2 Perform Functional Check
with Diode Test Set
- - - - - -
4.8.3 Inspect Diode Matrix Unit Test
Set
- - - - - -
4.8.4 Maintain Diode Matrix Unit
Test Set
- - - - - -
4.9 Test Equipment TR: TOs 1B-1B-2-94JG-90-Series, 1-
1M-33, 33D5-53-1-111, 33D5-53-13-
1, 33D5-53-15-1, 33D7-33-192-1
4.9.1 Description - - - - - -
B-1 Aircraft
52 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
4.9.2 Familiarization
* 4.9.2.1 Conventional Bomb Module
Tester (750A Test Set)
A - - - - -
* 4.9.2.2 Junction Box Ejector Rack
Test Set (JBERTS)
A - - - - -
4.9.2.3 RLDS Test Set - - - - - -
4.9.2.4 Proximity Switch Test Set - - - - - -
4.9.2.5 Weapons Bay Door / Spoiler
Test Set
- - - - - -
4.9.2.6 AN/GYQ-79 (CMBRE) - - - - - -
* 4.9.2.7 Proofload Tester A - - - - -
4.9.2.8 MAU-12/40/50 Tester - - - - - -
4.9.3 Inspect
* 4.9.3.1 Conventional Bomb Module
Tester (750A Test Set)
1a - - - - -
* 4.9.3.2 Junction Box Ejector Rack
Test Set (JBERTS)
1a - - - - -
4.9.3.3 RLDS Test Set - - - - - -
4.9.3.4 Proximity Switch Test Set - - - - - -
4.9.3.5 Weapons Bay Door / Spoiler
Test Set
- - - - - -
4.9.3.6 AN/GYQ-79 (CMBRE) - - - - - -
* 4.9.3.7 Proofload Tester 1a - - - - -
4.9.3.8 MAU-12/40/50 Tester - - - - - -
4.9.4 Maintain
4.9.4.1 Conventional Bomb Module
Tester (750A Test Set)
- - - - - -
4.9.4.2 Junction Box Ejector Rack
Test Set (JBERTS)
- - - - - -
4.9.4.3 AN/GYQ-79 (CMBRE) - - - - - -
4.9.4.4 Proofload Tester - - - - - -
4.9.4.5 MAU-12/40/50 Tester - - - - - -
4.9.5 Repair
4.9.5.1 Conventional Bomb Module
Tester (750A Test Set)
- - - - - -
4.9.5.2 Junction Box Ejector Rack
Test Set (JBERTS)
- - - - - -
4.9.5.3 AN/GYQ-79 (CMBRE) - - - - - -
4.9.5.4 Proofload Tester - - - - - -
4.9.5.5 MAU-12/40/50 Tester - - - - - -
4.10 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1B-1B-33-2-1, 1B-
1B-33-2-1CL-Series
* 4.10.1 Characteristics A - - B - -
4.10.2 Conventional Rotary Launcher
(LAU-144/A)
* 4.10.2.1 Load F 1b - - - - -
* 4.10.2.2 Unload F 1b - - - - -
4.10.3 Conventional Bomb Module
* 4.10.3.1 Load F 1b - - - - -
* 4.10.3.2 Unload F 1b - - - - -
4.10.4 Chaff / Flare Module
B-1 Aircraft
53 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 4.10.4.1 Load 1b - - - - -
* 4.10.4.2 Unload 1b - - - - -
B-1 Aircraft
54 1 January 2012
THIS PAGE INTENTIONALLY LEFT BLANK
B-2A Aircraft
55 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2) CDC (1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
5 B-2 AIRCRAFT
5.1 Aerospace Ground Equipment TR: 11A-1-38, 11N-B1004-1, 34Y1-
87-11, 35C2-3-372-1, 35D3-2-25-1,
35D3-2-27-1, 35D5-3-8-31, 35E9-90-
41, 35F5-5-11-1, 35F5-5-15-1, 35E-10-34-1, 34E-10-33-1
5.1.1 Description - - - B - -
5.1.2 Accessories - - - B - -
5.1.3 Munitions Handling Trailers TR: TO 35D3-2-26-1, 35D3-2-27-1,
35D3-2-27-11, 35D3-2-27-21, 35D3-2-
27-6WC-1, 11-1-38, 11N-B1004-1
* 5.1.3.1 Inspect 1b - - - - -
* 5.1.3.2 Load / Unload 1b - - - - -
5.1.3.3 Tie-Down Procedures - - - - - -
5.1.4 MJ-40 Bomb Lift Truck TR: TO 35D3-9-21-1
5.1.4.1 Inspect - - - - - -
5.1.4.2 Operate - - - - - -
5.1.4.3 Drive - - - - - -
5.1.4.4 Ram Assembly
5.1.4.4.1 Inspect Ram - - - - - -
5.1.4.4.2 Install Ram - - - - - -
5.1.4.4.3 Remove Ram - - - - - -
5.1.5 MHU-83 Munitions Handling /
Loading Lift Truck TR: TO 35D5-3-8-31
* 5.1.5.1 Inspect 3b - - - - -
* 5.1.5.2 Operate 3b - - - - -
* 5.1.5.3 Drive 3b - - - - -
5.1.6 MHU-204/M Trailer TR: 11N-H5083-1, 11N-H5083-1CL-1
5.1.6.1 Inspect - - - - - -
5.1.6.2 Operate - - - - - -
5.1.6.3 Perform Mate / Demate
Procedures
- - - - - -
5.1.7 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
5.1.7.1 Inspect - - - - - -
5.1.7.2 Maintain - - - - - -
5.1.8 Launcher Loader Adapter TR: 11N-H5084-2
* 5.1.8.1 Inspect 2b - - - - -
* 5.1.8.2 Operate 2b - - - - -
5.1.8.3 Maintain - - - - - -
5.1.9 A/M32A-60 Generator Set TR: TOs 35C2-3-372-1, 35C2-3-372-
11, 35C2-3-372-14
5.1.9.1 Inspect - - - - - -
5.1.9.2 Operate - - - - - -
5.1.10 A/M32A-86 Generator Set TR: TOs 35C2-3-469-2, 35C2-3-469-
11, 35C2-3-469-12, 35C2-3-469-14
* 5.1.10.1 Inspect 3b - - - - -
B-2A Aircraft
56 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2) CDC (1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 5.1.10.2 Operate 3b - - - - -
5.1.11 FL-1D Floodlight Set
5.1.11.1 Inspect - - - - - -
5.1.11.2 Operate - - - - - -
5.2 Aircraft Familiarization TR: TOs 1B-2A-16, 1B-2A-33-2-1, 1B-
2A-2-01JG-Series, 1B-2A-2-05JG-Series, 1B-2A-2-94GS-00-1
5.2.1 Access Doors and Panels - - - - - -
5.2.2 Ground Handling and Safety - - - - - -
5.2.3 Stores Management System - - - - - -
5.2.4 Nuclear Enable System - - - - - -
5.2.5 Perform Aircraft Safe for
Maintenance Procedures
F - - - - - -
5.2.6 Electrically Operate Weapons
Bay Doors
- - - - - -
5.2.7 Remove / Apply Aircraft Power
/ Cooling Air (Non-CASS)
- - - - - -
5.2.8 Remove / Apply Aircraft Power
/ Cooling Air (CASS)
- - - - - -
5.2.9 Perform MMS Command
Disable System Recode
Procedures
- - - - - -
5.2.10 Install / Remove Maintenance
Write Cartridge
- - - - - -
5.2.11 Interpret On-Board Test Set
Ground Printer Expanded Data
- - - - - -
5.2.12 Operational Flight Program
(OFP) Reload
- - - - - -
5.3 Stores Suspension Equipment TR: TO 1B-2A-6, 1B-2A-16, 1B-2A-
33-2-1, 1B-2A-2-94JG-30-1, 1B-2A-2-
94JG-30-2, 11B29-3-70-1, 11B29-3-66-1, 11N-L5006-1, 11N-L5006-2, 33D5-
53-13-1, 11NH5006-1, 11N5006-2,
11N-H5079-2
5.3.1 BRU-44
5.3.1.1 Theory of Operation - - - - - -
5.3.1.2 Remove from Rotary Launcher
Adapter (RLA)
- - - - - -
5.3.1.3 Disassemble B - - - - - -
5.3.1.4 Clean - - - - - -
5.3.1.5 Inspect
5.3.1.5.1 After Fire B - - - - - -
5.3.1.5.2 30 Day / 5 Fire - - - - - -
5.3.1.5.3 24 Month - - - - - -
5.3.1.5.4 50 Fire - - - - - -
5.3.1.6 Repair - - - - - -
5.3.1.7 Assemble B - - - - - -
5.3.1.8 Install / Remove SMU-105 and
Junction Box
- - - - - -
5.3.1.9 Install / Remove Adapter
Fitting
- - - - - -
5.3.1.10 Install on RLA - - - - - -
B-2A Aircraft
57 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2) CDC (1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
5.3.1.11 Weight Check with Proofload
Tester
- - - - - -
5.3.1.12 Leak Check - - - - - -
5.3.1.13 Hook Torque Check - - - - - -
5.3.1.14 Perform Bench Check with
MAU-12 / 40 / 50 Test Set
- - - - - -
5.3.1.15 Perform Bench Check with
Common Organizational Level
Tester (COLT)
- - - - - -
5.3.1.16 Perform on Aircraft Functional
Check
- - - - - -
5.3.3 Smart Bomb Rack Assembly
(SBRA)
5.3.3.1 Remove from Aircraft - - - - - -
5.3.3.2 Disassemble - - - - - -
5.3.3.3 Inspect - - - - - -
5.3.3.4 Repair - - - - - -
5.3.3.5 Assemble - - - - - -
5.3.3.6 Off Equipment Reconfiguration - - - - - -
5.3.3.7 On Equipment Reconfiguration - - - - - -
5.3.3.8 Install on Aircraft - - - - - -
5.3.3.9 Perform Operational Checkout
with COLT
- - - - - -
5.3.3.10 Perform Functional Check - - - - - -
5.3.3.11 Use Storage and Transport
Pallet
- - - - - -
5.3.3.12 Bomb Release Controller
5.3.3.12.1 Perform Operational Check - - - - - -
5.3.3.12.2 Remove from SBRA - - - - - -
5.3.3.12.3 Install on SBRA - - - - - -
5.3.4 Rotary Launcher Adapter
(RLA)
5.3.4.1 Install / Remove from Aircraft
using MHU-204 Trailer
- - - - - -
5.3.4.2 Install / Remove from Aircraft
using I & R Adapter with Lift
Truck
- - - - - -
5.3.4.3 Install / Remove to / from
Suspended Loading and
Checkout Frame using MHU-
204 Trailer
- - - - - -
5.3.4.4 Reconfigure - - - - - -
5.3.4.5 Inspect - - - - - -
5.3.4.6 Perform Postload Functional
Checks
- - - - - -
5.3.4.7 Perform Operational Checkout
with COLT
- - - - - -
5.3.4.8 Perform Manual RLA Rotation - - - - - -
5.3.4.9 Perform Manual RLA Rotation
in Frame
- - - - - -
5.3.4.10 Rack Configurations - - - - - -
B-2A Aircraft
58 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2) CDC (1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
5.3.4.11 Install / Remove Nuclear
Weapons Interface Unit/Control
Unit
- - - - - -
5.3.4.12 Install / Remove Missile Status
Relay Assembly
- - - - - -
5.3.4.13 Install / Remove Transformer
Rectifier Unit
- - - - - -
5.3.4.14 Install / Remove Bomb Status
Relay Assembly
- - - - - -
5.3.4.15 Install / Remove Ejector Relay - - - - - -
5.4 Install / Remove Stores
Management System
Components TR: TO 1B-2A-2-94JG-10-1, 11N-
C5062-2
5.4.1 Stores Management Processor - - - - - -
5.4.2 Ground Control Panel - - - - - -
5.4.3 Consent / Arm Panel - - - - - -
5.4.4 Jettison Enable Panel - - - - - -
5.4.5 Manual Weapons Release Panel - - - - - -
5.4.6 Weapons Door Safe Lock
Control
- - - - - -
5.5 Weapons Suspension System TR: TOs 11LA14-4-2, 0-4-6-2, 1B-2A-
2-94JG Series
5.5.1 System Operational Checkout - - - - - -
5.5.2 Hydraulic Switching Valve
5.5.2.1 Remove - - - - - -
5.5.2.2 Install - - - - - -
5.5.3 Forward Clip-In Fitting
5.5.3.1 Remove - - - - - -
5.5.3.2 Install - - - - - -
5.5.3.3 PDU Manual Drive / Flex Shaft
5.5.3.3.1 Remove - - - - - -
5.5.3.3.2 Install - - - - - -
5.5.3.3.3 Inspect / Lubricate - - - - - -
5.5.4 Aft Clip-In Fitting
5.5.4.1 Remove - - - - - -
5.5.4.2 Install - - - - - -
5.5.4.3 Adjust - - - - - -
5.5.5 Forward RLA Torque Limiters
5.5.5.1 Remove - - - - - -
5.5.5.2 Install - - - - - -
5.5.6 Aft RLA Torque Limiters
5.5.6.1 Remove - - - - - -
5.5.6.2 Install - - - - - -
5.6 Ground Control Panel TR: TO 1B-2A-2-94JG-10-1, 11N-
C5062-2
5.6.1 Disassemble - - - - - -
5.6.2 Inspect - - - - - -
5.6.3 Repair - - - - - -
5.6.4 Assemble - - - - - -
B-2A Aircraft
59 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2) CDC (1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
5.6.5 Perform Prefunctional
Continuity and Isolation Check
- - - - - -
5.6.6 Perform Functional Check - - - - - -
5.7 Test Equipment TR: TOs 11B29-3-70-8-1, 11B29-3-72-
8-1, 11N-L-5008-1, 31S5-4-3682-1,
33A39-71-1, 33D5-12-243-1, 33D7-77-
83-1, 33K6-4-433-1, 35D5-53-13-1
5.7.1 Description - - - - - -
5.7.2 Familiarization
5.7.2.1 Proofload Tester - - - - - -
5.7.2.2 Bonding Meter T477W - - - - - -
5.7.2.3 Stores Management System
Test Set
- - - - - -
5.7.2.4 MAU-12 / 40 / 50 Test Set - - - - - -
5.7.2.5 Tension Resistance Meter - - - - - -
5.7.2.6 Common Organizational Level
Tester (COLT)
- - - - - -
5.7.2.7 TTU-584/E (COLT) Accessory
Kit
- - - - - -
5.7.2.8 B-2 Test Programmable Set
(TPS)
- - - - - -
5.7.3 Inspect
5.7.3.1 Proofload Tester - - - - - -
5.7.3.2 Bonding Meter T477W - - - - - -
5.7.3.3 and 4
5.7.3.5 Stores Management System
Test Set
- - - - - -
5.7.3.6 MAU-12 / 40 / 50 Test Set - - - - - -
5.7.3.7 Tension Resistance Meter - - - - - -
5.7.3.8 Common Organizational Level
Tester (COLT)
- - - - - -
5.7.3.9 TTU-584/E (COLT) Accessory
Kit
- - - - - -
5.7.3.10 B-2 Test Programmable Set
(TPS)
- - - - - -
5.7.4 Maintain
5.7.4.1 Proofload Tester - - - - - -
5.7.4.2 Bonding Meter T477W - - - - - -
5.7.4.3 Stores Management System
Test Set
- - - - - -
5.7.4.4 MAU-12 / 40 / 50 Test Set - - - - - -
5.7.4.5 Tension Resistance Meter - - - - - -
5.7.4.6 Common Organizational Level
Tester (COLT)
- - - - - -
5.7.4.7 TTU-584/E (COLT) Accessory
Kit
- - - - - -
5.7.4.8 B-2 Test Programmable Set
(TPS)
- - - - - -
5.7.5 Repair
5.7.5.1 Proofload Tester - - - - - -
5.7.5.2 Bonding Meter T477W - - - - - -
B-2A Aircraft
60 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2) CDC (1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
5.7.5.3 Stores Management System
Test Set
- - - - - -
5.7.5.4 MAU-12 / 40 / 50 Test Set - - - - - -
5.7.5.5 Tension Resistance Meter - - - - - -
5.7.5.6 Common Organizational Level
Tester (COLT)
- - - - - -
5.7.5.7 TTU-584/E (COLT) Accessory
Kit
- - - - - -
5.7.5.8 B-2 Test Programmable Set
(TPS)
- - - - - -
5.8 Support Equipment TR: TOs 11B29-3-66-1, 11N-C5062- 2,
35D-2-2, AFOSH STD 91-46
5.8.1 Inspect
5.8.1.1 Bomb Rack Stanchion /
Transverse Beam / Interface
Unit Sling
- - - - - -
5.8.1.2 Bomb Rack Assembly Aircraft
Maintenance Sling
- - - - - -
5.8.1.3 Bomb Rack Assembly
Maintenance Stand
- - - - - -
5.8.1.4 Empty Bomb Rack Storage and
Transport Pallet
- - - - - -
5.8.1.5 Power Supply - - - - - -
5.8.1.6 Adapter Cable Breakout Box - - - - - -
5.8.1.7 Trestle Hoist - - - - - -
5.8.1.8 I & R Adapter - - - - - -
5.8.2 Use
5.8.2.1 Bomb Rack Stanchion /
Transverse Beam / Interface
Unit Sling
- - - - - -
5.8.2.2 Bomb Rack Assembly Aircraft
Maintenance Sling
- - - - - -
5.8.2.3 Bomb Rack Assembly
Maintenance Stand
- - - - - -
5.8.2.4 Empty Bomb Rack Storage and
Transport Pallet
- - - - - -
5.8.2.5 Power Supply - - - - - -
5.8.2.6 Adapter Cable Breakout Box - - - - - -
5.8.2.7 Trestle Hoist - - - - - -
5.8.2.8 I & R Adapter - - - - - -
5.9 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1B-2A-16, 1B-2A-
16CL-1, 1B-2A-16CL-2, 1B-2A-33-2-
1, 1B-2A-33-2-1CL-1, 1B-2A-33-2-1CL-2
* 5.9.1 Characteristics A - - B - -
5.9.2 Nonnuclear
5.9.2.1 Load F - - - - - -
5.9.2.2 Unload F - - - - - -
5.9.3 Nuclear
5.9.3.1 Load - - - - - -
5.9.3.2 Unload - - - - - -
61 1 January 2012
THIS PAGE INTENTIONALLY LEFT BLANK
B-52H Aircraft
62 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
6 B-52H AIRCRAFT
6.1 Aerospace Ground
Equipment TR: TO 11N-B1004-1, 11-1-38,
35D3-2-25-1, 35D3-11-36WC-2,
35D5-3-8-31, 35D3-2-27-1, 35D3-
2-27-11, 35D3-2-27-21, 35D3-2-27-6WC-1, 35D3-2-27-6WC-2,
11N-H5015A-2, 11N-H5083-2, 11N-H5083-2-1, 11N-H5083-1CL-
1, 35C2-3-372-1, 35C2-3-372-11,
35C2-3-372-14, 35C2-3-469-2, 35C2-3-469-11, 35C2-3-469-12,
35C2-3-469-14, 35E9-11-71,
35F5-5-11-31, 35F5-5-16-1, 1B-52H-2-38JG-1, 1B-52H-16,
35D12-2-14-1
* 6.1.1 Description A - - B - -
6.1.2 Accessories - - - B - -
6.1.3 MJ-1 Aerial Stores Lift
Truck
* 6.1.3.1 Inspect 1b - - - - -
* 6.1.3.2 Operate 1b - - - - -
* 6.1.3.3 Drive 1b - - - - -
6.1.4 MHU-83 Munitions
Handling / Loading Lift
Truck
* 6.1.4.1 Inspect 3b - - - - -
* 6.1.4.2 Operate 3b - - - - -
* 6.1.4.3 Drive 3b - - - - -
6.1.5 Munitions Handling Trailers
* 6.1.5.1 Inspect 1b - - - - -
* 6.1.5.2 Load / Unload 1b - - - - -
6.1.5.3 Tie-Down Procedures - - - - - -
6.1.6 MHU-196/204 Trailer
* 6.1.6.1 Inspect 2b - - - - -
* 6.1.6.2 Operate 2b - - - - -
* 6.1.6.3 Mate / Demate 2b - - - - -
6.1.7 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
6.1.7.1 Inspect - - - - - -
6.1.7.2 Maintain - - - - - -
6.1.8 Launcher Loading Adapter TR: 11N-H5084-2
* 6.1.8.1 Inspect 2b - - - - -
* 6.1.8.2 Operate 2b - - - - -
6.1.9 A/M32A-60 Generator Set
6.1.9.1 Inspect - - - - - -
6.1.9.2 Operate - - - - - -
6.1.10 A/M32A-86 Generator Set
* 6.1.10.1 Inspect 3b - - - - -
* 6.1.10.2 Operate 3b - - - - -
6.1.11 TF-1 Floodlight Set
6.1.11.1 Inspect - - - - - -
6.1.11.2 Operate - - - - - -
B-52H Aircraft
63 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
6.1.12 FL-1D Floodlight Set
6.1.12.1 Inspect - - - - - -
6.1.12.2 Operate - - - - - -
6.1.13 MA-3(D) Air Conditioning
Unit
* 6.1.13.1 Inspect 1b - - - - -
* 6.1.13.2 Operate 1b - - - - -
6.1.14 Nitrogen Servicing Cart
6.1.14.1 Inspect - - - - - -
6.1.14.2 Operate - - - - - -
6.1.15 A/M32A-95 Gas Turbine
Compressor
* 6.1.15.1 Inspect 3b - - - - -
* 6.1.15.2 Operate 3b - - - - -
6.2 Aircraft Familiarization TR: TOs 1B-52H-16, 1B-52H-33-2-
1, 1B-52H-2-31GA-1, 1B-52H-2-38GA-1, 1B-52H-2-38JG Series,
1B-52H-2-2JG-(), 1B-52H-6,
11B29-3-22-2, 11B29-3-25-2
* 6.2.1 Aircraft Safety Devices B - - - - -
* 6.2.2 Aircraft Danger Areas B - - - - -
* 6.2.3 Aircraft Switches, Controls,
and Indicators
A - - - - -
* 6.2.4 Perform Aircraft Safe for
Maintenance Procedures
F 3b - - - - -
* 6.2.5 Apply / Remove Main
External Electrical Power
3b - - - - -
* 6.2.6 Open / Close Bomb Bay
Doors
1b - - - - -
6.2.7 Perform Basic Post-Flight
Inspections
* 6.2.7.1 MAU-12 Bomb Rack 3b - - - - -
* 6.2.7.2 Cluster Bomb Rack 1b - - - - -
6.3 Stores Suspension
Equipment
* 6.3.1 Description A - - - - -
* 6.3.2 Function of Parts A - - - - -
* 6.3.3 Theory of Operation A - - - - -
6.3.4 ICSMS Pylon Assembly TR: TOs 1B-52H-2-31JG-Series,
16W6-47-2
* 6.3.4.1 Remove 2b - - - - -
6.3.4.2 Disassemble - - - - - -
* 6.3.4.3 Inspect 1b - - - - -
6.3.4.4 Repair - - - - - -
6.3.4.5 Assemble - - - - - -
* 6.3.4.6 Install 2b - - - - -
6.3.5 Heavy Stores Adapter Beam TR: TOs 1B-52H-2-31JG-Series,
11B29-3-52-2, 16W6-47-2
6.3.5.1 Remove - - - - - -
6.3.5.2 Disassemble - - - - - -
6.3.5.3 Inspect - - - - - -
B-52H Aircraft
64 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
6.3.5.4 Repair - - - - - -
6.3.5.5 Assemble - - - - - -
6.3.5.6 Install - - - - - -
6.3.6 Cluster Bomb Rack TR: TOs 1B-52H-2-31JG Series,
11B29-3-21-2, 11B38-2-5-1
* 6.3.6.1 Remove 2b - - - - -
* 6.3.6.2 Inspect 2b - - - - -
* 6.3.6.3 Install 2b - - - - -
6.3.7 A-6 Bomb Release Unit TR: TOs 11B29-3-21-2, 11B38-2-
5-1
* 6.3.7.1 Remove 3b - - - - -
* 6.3.7.2 Inspect 3b - - - - -
* 6.3.7.3 Install 3b - - - - -
6.3.8 B-11 Bomb Shackle TR: TO 11B40-2-4-3
* 6.3.8.1 Disassemble 2b - - - - -
* 6.3.8.2 Inspect 2b - - - - -
* 6.3.8.3 Assemble 2b - - - - -
6.3.9 CSRL Yokes TR: TOs 1B-52H-2-31JG-Series,
11B29-3-52-2
* 6.3.9.1 Remove 2b - - - - -
6.3.9.2 Disassemble - - - - - -
* 6.3.9.3 Inspect 1b - - - - -
6.3.9.4 Repair - - - - - -
6.3.9.5 Assemble - - - - - -
* 6.3.9.6 Install 2b - - - - -
6.3.9.7 Hydraulic Power Supply TR: 33D2-5-81-1
6.3.9.7.1 Inspect - - - - - -
6.3.9.7.2 Operate - - - - - -
6.3.9.7.3 Maintain - - - - - -
6.3.9.8 PDU to/from Yoke
Assembly TR: 11B29-3-52-2
6.3.9.8.1 Remove - - - - - -
6.3.9.8.2 Inspect - - - - - -
6.3.9.8.3 Install - - - - - -
6.3.10 CSRL (Empty) TR: TOs 1B-52H-2-31JG-Series,
1B-52H-16, 11B29-3-25-2
* 6.3.10.1 Remove 1b - - - - -
6.3.10.2 Inspect - - - - -
* 6.3.10.3 Install 1b - - - - -
6.3.11 MAU-12 TR: TOs 1B-52H-2-31JG-Series,
11B29-3-25-2, 16W6-47-2, 35D5-
53-13-1
* 6.3.11.1 Remove from Heavy Stores
Adapter Beam
2b - - - - -
* 6.3.11.2 Disassemble B 2b - - - - -
* 6.3.11.3 Inspect B 2b - - - - -
B-52H Aircraft
65 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
6.3.11.4 Repair - - - - - -
* 6.3.11.5 Assemble B 2b - - - - -
* 6.3.11.6 Install on Heavy Stores
Adapter Beam
2b - - - - -
* 6.3.11.7 Perform Bench Check with
MAU-12/40/50 Test Set
2b - - - - -
* 6.3.11.8 Perform Weight Check with
Proofload Tester
2b - - - - -
* 6.4 Pylon Wing Adapter
(PWA) TR: TOs 1B-52H-2-31-GA-1, 1B-
52H-2-31JG-Series
1b - - - - -
6.4.1 Perform Operational Check
TR:
6.5 Maintain System Explosive
Devices TR: TOs 1B-52H-2-31JG-Series
6.5.1 Pressure-Actuated Explosive
Devices (PAED)
6.5.1.1 Install - - - - - -
6.5.1.2 Remove - - - - - -
6.5.2 Electro-Explosive Devices
(EED)
6.5.2.1 Install - - - - - -
6.5.2.2 Remove - - - - - -
6.5.3 Shielded-Mild Detonating
Cord (SMDC)
6.5.3.1 Install - - - - - -
6.5.3.2 Remove - - - - - -
6.5.4 Gas Grain Generators
(GGG)
6.5.4.1 Install - - - - - -
6.5.4.2 Remove - - - - - -
6.6 Armament System
Components TR: TOs 1B-52H-2-31JG-Series,
1B-52H-2-38JG-Series
6.6.1 Component Functions - - - - - -
6.6.2 Digital Bomb Release
Interval Control (D-BRIC) TR: 33D7-50-1913-1
* 6.6.2.1 Remove 1b - - - - -
6.6.2.2 Inspect - - - - - -
* 6.6.2.3 Install 1b - - - - -
6.6.2.4 Perform Operational Check - - - - - -
6.6.2.5 Operate - - - - - -
6.6.3 Weapons Control Panel
6.6.3.1 Remove - - - - - -
6.6.3.2 Install - - - - - -
6.6.4 Missile Consent Panel
6.6.4.1 Remove - - - - - -
6.6.4.2 Install - - - - - -
B-52H Aircraft
66 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
6.6.5 Conventional Weapons
Control Panel
6.6.5.1 Remove - - - - - -
6.6.5.2 Install - - - - - -
6.6.6 Jettison Time Delay Relay
Panel
6.6.6.1 Remove - - - - - -
6.6.6.2 Install - - - - - -
6.6.7 Conventional Weapons
Relay Panel
6.6.7.1 Remove - - - - - -
6.6.7.2 Inspect - - - - - -
6.6.7.3 Repair - - - - - -
6.6.7.4 Install - - - - - -
6.6.7.5 Perform Operational Check - - - - - -
6.6.7.6 Operate - - - - - -
* 6.7 Coded Switch System TR: TO 11N-T5059-2, 1B-52H-2-
31GA-1
B - - - - -
6.8 Perform Weapons System
Operational Checks TR: TOs 1B-52H-2-31GA-1, 1B-
52H-2-31JG-Series, 1B-52H-2-
38JG-Series, 1B-52H-16CL-Series, 16W6-47-2
* 6.8.1 Ground Maintenance
Computer Program
1b - - - - -
6.8.2 Pylon Jettison Relay Check - - - - - -
* 6.8.3 MIT GO/NO-GO 1b - - - - -
6.8.4 System Interface Test - - - - - -
6.8.5 Conventional
* 6.8.5.1 Internal Nonnuclear Release
System Check
1b - - - - -
* 6.8.5.2 External Nonnuclear
Release Check
1b - - - - -
* 6.8.5.3 ICSMS at Wing Disconnect 1b - - - - -
* 6.8.5.4 ICSMS Pylon Functional
Check
1b - - - - -
6.8.6 Nuclear
6.8.6.1 Internal - - - - - -
* 6.8.6.2 External 1b - - - - -
6.9 Troubleshooting Procedures TR: TOs 1B-52H-2-31GA-1, 1B-
52H-2-38-GA-1
-
* 6.9.1 Principles of
Troubleshooting
A - - - - -
* 6.9.2 Use Troubleshooting Tables 1a - - - - -
B-52H Aircraft
67 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 6.9.3 Isolate Fault 1a - - - - -
6.10 Test Equipment TR: TOs 11N-T5149-2-1, 11N-
T5149-4, 11N-T5149-8, 33D5-30-
6-1, 33D7-38-127-1, 33D7-38-127-4, 33D2-5-81-1, 35D5-30-9-1,
35D5-30-9-4
6.10.1 Description - - - - - -
6.10.2 Familiarization
* 6.10.2.1 Multi Use Systems Tester –
Armament Next Generation
(MUSTANG)
A - - - - -
* 6.10.2.2 Proofload Tester A - - - - -
* 6.10.2.3 MAU-12/40/50 A - - - - -
6.10.3 Inspect
* 6.10.3.1 MUSTANG 1a - - - - -
* 6.10.3.2 Proofload Tester 1a - - - - -
* 6.10.3.3 MAU-12/40/50 1a - - - - -
6.10.4 Maintain
6.10.4.1 MUSTANG - - - - - -
6.10.4.2 Proofload Tester - - - - - -
6.10.4.3 MAU-12/40/50 - - - - - -
6.10.5 Repair
6.10.5.1 MUSTANG - - - - - -
6.10.5.2 Proofload Tester - - - - - -
6.10.5.3 MAU-12/40/50 - - - - - -
6.11 Support Equipment
6.11.1 T-128 Power Supply TR: 11N-T-5189-2
6.11.1.1 Inspect - - - - - -
6.11.1.2 Maintain - - - - - -
6.11.2 K4000 Power Supply TR: 35C2-2-32-41
6.11.2.1 Inspect - - - - - -
6.11.2.2 Maintain - - - - - -
6.11.3 Pylon Lift Beam TR: 11B29-3-52-2
6.11.3.1 Inspect - - - - - -
6.11.3.2 Maintain - - - - - -
6.12 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1B-52H-16, 1B-
52H-16CL-Series, 1B-52H-33-2-1,
1B-52H-33-2-2, 1B-52H-33-2-1CL-Series, 1B-52H-33-2-2CL-
Series
* 6.12.1 Characteristics A - - B - -
6.12.2 Nonnuclear
* 6.12.2.1 Load F 1b - - - - -
B-52H Aircraft
68 1 January 2012
1. Tasks 2. Core Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5 Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 6.12.2.2 Unload F 1b - - - - -
6.12.3 Nuclear
* 6.12.3.1 Load 1b - - - - -
* 6.12.3.2 Unload 1b - - - - -
B-52H Aircraft
69 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
F-15 Aircraft
70 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7 F-15 AIRCRAFT
7.1 Aerospace Ground Equipment TR: TOs 1-1A-15, 11-1-38, 11N-
B1004-1, 34Y1-87-11, 35C2-3-372-1,
35D3-2-25-1, 35D3-2-27-1, 35D3-9-
23-1, 35D5-3-8-31, 35DA3-6-37-1, 35E9-90-41
* 7.1.1 Description A - - B - -
7.1.2 MJ-1 Aerial Stores Lift Truck
* 7.1.2.1 Inspect 3b - - - - -
* 7.1.2.2 Operate 3b - - - - -
* 7.1.2.3 Drive 3b - - - - -
7.1.3 MHU-83 Munitions Handling /
Loading Lift Truck
* 7.1.3.1 Inspect 1b - - - - -
* 7.1.3.2 Operate 1b - - - - -
* 7.1.3.3 Drive 1b - - - - -
7.1.4 A/M32A-60 Generator Set
* 7.1.4.1 Inspect 2b - - - - -
* 7.1.4.2 Operate 2b - - - - -
7.1.5 A/M32A-85 Generator Set
7.1.5.1 Inspect - - - - - -
7.1.5.2 Operate - - - - - -
7.1.6 A/M32A-86 Generator Set
7.1.6.1 Inspect - - - - - -
7.1.6.2 Operate - - - - - -
7.1.7 A/M32C-10 Air Conditioner
* 7.1.7.1 Inspect 2b - - - - -
* 7.1.7.2 Operate 2b - - - - -
7.1.8 Munitions Handling Trailers
* 7.1.8.1 Inspect 1b - - B - -
* 7.1.8.2 Load / Unload 1b - - - - -
7.1.8.3 Tie-Down Procedures - - - - - -
7.1.9 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
7.1.9.1 Inspect - - - - - -
7.1.9.2 Maintain - - - - - -
7.1.10 TF-1 Floodlight Set
7.1.10.1 Inspect - - - - - -
7.1.10.2 Operate - - - - - -
7.1.11 FL-1D Floodlight Set
7.1.11.1 Inspect - - - - - -
7.1.11.2 Operate - - - - - -
7.1.12 ADU-537A/E Missile-
Munitions Loading Adapter
* 7.1.12.1 Inspect 1b - - - - -
7.1.12.2 Maintain - - - - - -
* 7.1.12.3 Operate 1b - - - - -
7.2 Aircraft Familiarization TR: TOs 1F-15()-2-00GV-00-1, 1F-
15()-2-05JG-00-1, 1F-15()-2-05JG-10-
1, 1F-15()-2-94GS-00-1, 1F-15()-33-1-2, 1F-15E-16
F-15 Aircraft
71 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 7.2.1 Aircraft Switches, Controls,
and Indicators
B - - - - -
* 7.2.2 Aircraft Safety Devices B - - - - -
* 7.2.3 Aircraft Danger Areas B - - - - -
* 7.2.4 Perform Aircraft Safe for
Maintenance Procedures
F 3b - - - - -
* 7.2.5 Apply / Remove Aircraft
External Electrical Power
2b - - - - -
7.3 Gun System TR: TOs 1F-15()-2-94JG-50-Series,
1F-15()-2-94JG-73-1, 1F-15()-33-1-2,
11W1-7-15-2, 11W1-7-17-2, 11W1-7-17-4, 11W1-12-4-32, 33D5-3-46-1,
33D5-3-50-1, 33D5-12-209-1, 33D5-
12-231-1, 33D5-16-72-1, 35C2-3-372-11, 35E9-90-11
* 7.3.1 Nomenclature B - - - - -
* 7.3.2 Function of Parts B - - - - -
* 7.3.3 Theory of Operation B - - - - -
* 7.3.4 Perform Safing and Clearing
Procedures
F 3b - - - - -
* 7.3.5 Malfunctions / Jams * A - - - - -
* 7.3.6 Perform Functional Check with
A/E24T-171 / 199 Test Set
2b - - - - -
* 7.3.7 Perform Operational Check
with A/E24T-169 / 198 Tester
2b - - - - -
7.3.8 Boresight - - - - - -
7.3.9 M61A1 Gun
* 7.3.9.1 Nomenclature B - - - - -
* 7.3.9.2 Function of Parts B - - - - -
* 7.3.9.3 Cycle of Operation B - - - - -
* 7.3.9.4 Remove 2b - - - - -
* 7.3.9.5 Disassemble 2b - - - - -
* 7.3.9.6 Inspect 1b - - - - -
7.3.9.7 Repair - - - - - -
* 7.3.9.8 Assemble 2b - - - - -
* 7.3.9.9 Install 2b - - - - -
* 7.3.9.10 Perform Performance In-Shop
Check
2b - - - - -
7.3.10 Gun Handling Adapter
* 7.3.10.1 Inspect 1b - - - - -
* 7.3.10.2 Use 1b - - - - -
7.3.10.3 Maintain - - - - - -
7.3.11 Drum Assembly
* 7.3.11.1 Remove 2b - - - - -
7.3.11.2 Disassemble - - - - - -
7.3.11.3 Inspect - - - - - -
7.3.11.4 Repair - - - - - -
7.3.11.5 Assemble - - - - - -
* 7.3.11.6 Install 2b - - - - -
7.3.12 Container Assembly
* 7.3.12.1 Remove 2b - - - - -
7.3.12.2 Disassemble - - - - - -
F-15 Aircraft
72 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.3.12.3 Inspect - - - - - -
7.3.12.4 Repair - - - - - -
7.3.12.5 Assemble - - - - - -
* 7.3.12.6 Install 2b - - - - -
7.3.13 Conveyor Assembly
* 7.3.13.1 Remove 2b - - - - -
7.3.13.2 Disassemble - - - - - -
7.3.13.3 Inspect - - - - - -
7.3.13.4 Repair - - - - - -
7.3.13.5 Assemble - - - - - -
* 7.3.13.6 Install 2b - - - - -
7.3.14 Ammunition Drum / Container
Support Equipment
* 7.3.14.1 Inspect 1b - - - - -
* 7.3.14.2 Use 1b - - - - -
7.3.14.3 Maintain - - - - - -
7.3.15 Flow Regulator
7.3.15.1 Remove - - - - - -
7.3.15.2 Install - - - - - -
7.3.16 Gear Box Assembly
7.3.16.1 Remove - - - - - -
7.3.16.2 Inspect - - - - - -
7.3.16.3 Install - - - - - -
7.3.17 Hydraulic Drive Motor
7.3.17.1 Remove - - - - - -
7.3.17.2 Inspect - - - - - -
7.3.17.3 Install - - - - - -
7.3.18 Rounds Limiter and Totalizer
7.3.18.1 Remove - - - - - -
7.3.18.2 Install - - - - - -
7.3.19 Main Drive Assembly
7.3.19.1 Remove - - - - - -
7.3.19.2 Inspect - - - - - -
7.3.19.3 Install - - - - - -
7.3.20 Unload Drive Gearbox
7.3.20.1 Remove - - - - - -
7.3.20.2 Inspect - - - - - -
7.3.20.3 Install - - - - - -
7.3.21 Drive Shaft Assembly
7.3.21.1 Remove - - - - - -
7.3.21.2 Inspect - - - - - -
7.3.21.3 Install - - - - - -
7.3.22 Conveyor Element Checking
Fixture
7.3.22.1 Inspect - - - - - -
7.3.22.2 Operate - - - - - -
7.3.23 Transfer Unit Checking Fixture
7.3.23.1 Inspect - - - - - -
7.3.23.2 Operate - - - - - -
7.3.24 Entrance / Exit Unit Checking
Fixture
F-15 Aircraft
73 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.3.24.1 Inspect - - - - - -
7.3.24.2 Operate - - - - - -
7.3.25 Handoff Unit Checking Fixture
(F-15A-D)
7.3.25.1 Inspect - - - - - -
7.3.25.2 Operate - - - - - -
7.3.26 Handoff Unit Checking Fixture
(F-15E)
7.3.26.1 Inspect - - - - - -
7.3.26.2 Operate - - - - - -
7.3.27 Feed Unit Checking Fixture
7.3.27.1 Inspect - - - - - -
7.3.27.2 Operate - - - - - -
7.3.28 Unload Unit Checking Fixture
7.3.28.1 Inspect - - - - - -
7.3.28.2 Operate - - - - - -
7.4 Ammunition Loading Systems TR: TOs 35D30-4-11-1, 35D30-4-15-
1, 35D30-4-15-4, 35D30-4-16-1,
35D2-19-1
* 7.4.1 Nomenclature A - - - - -
* 7.4.2 Theory of Operation A - - - - -
* 7.4.3 Use UALS / LALS 2b - - - - -
7.4.4 Universal Ammunition
Loading System (UALS)
7.4.4.1 Drum
7.4.4.1.1 Remove - - - - - -
7.4.4.1.2 Disassemble - - - - - -
7.4.4.1.3 Inspect - - - - - -
7.4.4.1.4 Repair - - - - - -
7.4.4.1.5 Assemble - - - - - -
7.4.4.1.6 Install - - - - - -
7.4.4.2 Conveyor / Assembly
7.4.4.2.1 Remove - - - - - -
7.4.4.2.2 Disassemble - - - - - -
7.4.4.2.3 Inspect - - - - - -
7.4.4.2.4 Repair - - - - - -
7.4.4.2.5 Assemble - - - - - -
7.4.4.2.6 Install - - - - - -
7.4.4.3 Interface Unit
7.4.4.3.1 Remove - - - - - -
7.4.4.3.2 Disassemble - - - - - -
7.4.4.3.3 Inspect - - - - - -
7.4.4.3.4 Repair - - - - - -
7.4.4.3.5 Assemble - - - - - -
7.4.4.3.6 Install - - - - - -
7.4.4.4 UALS Interface Unit Checking
Fixture
7.4.4.4.1 Inspect - - - - - -
7.4.4.4.2 Operate - - - - - -
7.4.4.5 UALS Entrance / Exit Unit
Checking Fixture
F-15 Aircraft
74 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.4.4.5.1 Inspect - - - - - -
7.4.4.5.2 Operate - - - - - -
7.4.4.6 Conveyor Element Checking
Fixture
7.4.4.6.1 Inspect - - - - - -
7.4.4.6.2 Operate - - - - - -
7.4.5 Linkless Ammunition Loading
System (LALS)
7.4.5.1 Storage Container
7.4.5.1.1 Remove - - - - - -
7.4.5.1.2 Disassemble - - - - - -
7.4.5.1.3 Inspect - - - - - -
7.4.5.1.4 Repair - - - - - -
7.4.5.1.5 Assemble - - - - - -
7.4.5.1.6 Install - - - - - -
7.4.5.2 Conveyor / Assembly
7.4.5.2.1 Remove - - - - - -
7.4.5.2.2 Disassemble - - - - - -
7.4.5.2.3 Inspect - - - - - -
7.4.5.2.4 Repair - - - - - -
7.4.5.2.5 Assemble - - - - - -
7.4.5.2.6 Install - - - - - -
7.4.5.3 Universal Aircraft Interface
Unit
7.4.5.3.1 Remove - - - - - -
7.4.5.3.2 Disassemble - - - - - -
7.4.5.3.3 Inspect - - - - - -
7.4.5.3.4 Repair - - - - - -
7.4.5.3.5 Assemble - - - - - -
7.4.5.3.6 Install - - - - - -
7.4.5.4 Conveyor Element Checking
Fixture
7.4.5.4.1 Inspect - - - - - -
7.4.5.4.2 Operate - - - - - -
7.4.5.5 Ammunitions Delinker Loader
7.4.5.5.1 Nomenclature - - - - - -
7.4.5.5.2 Theory Of Operation - - - - - -
7.4.5.5.3 Disassemble - - - - - -
7.4.5.5.4 Inspect - - - - - -
7.4.5.5.5 Repair - - - - - -
7.4.5.5.6 Assemble - - - - - -
7.4.5.5.7 Use - - - - - -
7.4.6 Ammunition Loading System
Replenisher
7.4.6.1 Nomenclature - - - - - -
7.4.6.2 Theory Of Operation - - - - - -
7.4.6.3 Disassemble - - - - - -
7.4.6.4 Inspect - - - - - -
7.4.6.5 Repair - - - - - -
7.4.6.6 Assemble - - - - - -
7.4.6.7 Use - - - - - -
F-15 Aircraft
75 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.5 Stores Suspension Equipment TR: TOs 1F-15()-2-94JG-31-Series,
1F-15()-2-94JG-32-Series, 1F-15()-6,
1F-15()-33-1-2, 6J14-5-11-8-1, 11B29-
3-25-2, 11B29-3-28-1, 11B29-3-60-2, 11B29-3-61-2, 11B29-3-73-1, 11L1-3-
28-2, 11L1-3-29-2, 11LA8-7-3, 11L1-
2-24-2, 11L1-3-29-2, 16W6-25-2, 16W6-25-12, 33D5-12-208-1, 33D5-
53-13-1, 33D5-53-1-111, 33D9-14-69-
1, 33D9-45-34-1, 33D5-30-4-1, 33D5-3-46-1
* 7.5.1 Description A - - - -
* 7.5.2 Theory of Operation A - - - - -
* 7.5.3 Function of Parts A - - - - -
7.5.4 SUU-59 Pylon
* 7.5.4.1 Remove 3b - - - - -
7.5.4.2 Disassemble - - - - - -
7.5.4.3 Inspect - - - - - -
7.5.4.4 Repair - - - - - -
7.5.4.5 Assemble - - - - - -
* 7.5.4.6 Install 3b - - - - -
* 7.5.4.7 Perform Functional Check with
A/E24T-171/199 Test Set
1b - - - - -
* 7.5.4.8 Perform Bench Check with
A/E24T-170/197 Test Set
1b - - - - -
* 7.5.4.9 Perform Operational Check
with A/E24T-169/198
1b - - - - -
7.5.4.10 Perform Nuclear Weapons
Release System Checkout
(CAT D) with A/E24T-198
- - - - - -
7.5.5 SUU-60 Pylon
7.5.5.1 Remove - - - - - -
7.5.5.2 Disassemble - - - - - -
7.5.5.3 Inspect - - - - - -
7.5.5.4 Repair - - - - - -
7.5.5.5 Assemble - - - - - -
7.5.5.6 Install - - - - - -
7.5.5.7 Perform Functional Check with
A/E24T-171/199 Test Set
- - - - - -
7.5.5.8 Perform Bench Check with
A/E24T-170/197 Test Set
- - - - - -
7.5.5.9 Perform Operational Check
with A/E24T-169/198
- - - - - -
7.5.6 SUU-73A Pylon
7.5.6.1 Remove - - - - - -
7.5.6.2 Disassemble - - - - - -
7.5.6.3 Inspect - - - - - -
7.5.6.4 Repair - - - - - -
7.5.6.5 Assemble - - - - - -
7.5.6.6 Install - - - - - -
7.5.6.7 Perform Functional Check with
A/E24T-199 Test Set
- - - - - -
F-15 Aircraft
76 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.5.6.8 Perform Bench Check with
A/E24T-197 Test Set
- - - - - -
7.5.6.9 Perform Operational Check
with A/E24T-198 Test Set
- - - - - -
7.5.6.10 Perform Nuclear Weapons
Release System Checkout
(CAT D) with A/E24T-198
- - - - - -
7.5.6.11 SUU-73 B/A Pylon
7.5.6.11.1 Remove - - - - - -
7.5.6.11.2 Disassemble - - - - - -
7.5.6.11.3 Inspect - - - - - -
7.5.6.11.4 Repair - - - - - -
7.5.6.11.5 Assemble - - - - - -
7.5.6.11.6 Install - - - - - -
7.5.6.11.7 Perform Functional Check with
A/E24T-199 Test Set
- - - - - -
7.5.6.11.8 Perform Bench Check with
A/E24T-197 Test Set
- - - - - -
7.5.6.11.9 Perform Operational Check
with A/E24T-198 Test Set
- - - - - -
7.5.7 MAU-12
* 7.5.7.1 Remove 2b - - - - -
7.5.7.2 Disassemble B - - - - - -
7.5.7.3 Inspect B - - - - - -
7.5.7.4 Repair - - - - - -
7.5.7.5 Assemble B - - - - - -
* 7.5.7.6 Install 2b - - - - -
* 7.5.7.7 Perform Functional Check with
A/E24T-171/199 Test Set
2b - - - - -
* 7.5.7.8 Perform Bench Check with
MAU-12/40/50, A/E24T-170
or A/E24T-197 Test Set
2b - - - - -
* 7.5.7.9 Perform Operational Check
with A/E24T-169/198 Test Set
1b - - - - -
7.5.7.10 Perform Weight Check with
Proofload Tester
- - - - - -
7.5.8 BRU-46
* 7.5.8.1 Remove 2b - - - - -
* 7.5.8.2 Disassemble 2b - - - - -
* 7.5.8.3 Inspect 2b - - - - -
7.5.8.4 Repair - - - - - -
* 7.5.8.5 Assemble 2b - - - - -
* 7.5.8.6 Install 2b - - - - -
7.5.8.7 Perform Functional Check with
A/E24T-199 Test Set
b - - - - -
* 7.5.8.8 Perform Bench Check with
A/E24T-197 Test Set
2b - - - - -
* 7.5.8.9 Perform Operational Check
with A/E24T-198 Test Set
2b - - - - -
* 7.5.8.10 Perform Weight Check with
Proofload Test Set
2b - - - - -
7.5.9 BRU-47
F-15 Aircraft
77 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.5.9.1 Remove - - - - - -
7.5.9.2 Disassemble B - - - - - -
7.5.9.3 Inspect B - - - - - -
7.5.9.4 Repair - - - - - -
7.5.9.5 Assemble B - - - - - -
7.5.9.6 Install - - - - - -
7.5.9.7 Perform Functional Check with
A/E24T-199 Test Set
- - - - - -
7.5.9.8 Perform Bench Check with
A/E24T-197 Test Set
- - - - - -
7.5.9.9 Perform Operational Check
with A/E24T-198 Test Set
- - - - - -
7.5.9.10 Perform Weight Check with
Proofload Test Set
- - - - - -
7.5.9.11 Perform Nuclear Weapons
Release System Checkout
(CAT D) with A/E24T-198
- - - - - -
7.5.10 BRU-61
* 7.5.10.1 Remove 2b - - - - -
* 7.5.10.2 Disassemble - - - - - -
* 7.5.10.3 Inspect - - - - - -
7.5.10.4 Repair - - - - - -
* 7.5.10.5 Assemble - - - - - -
* 7.5.10.6 Install 2b - - - - -
* 7.5.10.7 Perform Operational (BIT)
Check
2b - - - - -
* 7.5.10.8 Perform Bench Check with
AN/GYQ-79 Test Set
2b - - - - -
7.5.11 LAU-106 Launcher
* 7.5.11.1 Remove 2b - - - - -
* 7.5.11.2 Disassemble 1b - - - - -
* 7.5.11.3 Inspect 1b - - - - -
7.5.11.4 Repair - - - - - -
* 7.5.11.5 Assemble 1b - - - - -
* 7.5.11.6 Install 2b - - - - -
* 7.5.11.7 Perform Functional Check with
A/E24T-171/199 Test Set
2b - - - - -
7.5.11.8 Breech Assembly
Reconfiguration
- - - - - -
* 7.5.11.9 Bench Check with A/E24T-
170/197 Test Set
2b - - - - -
* 7.5.11.10 Perform Operational Check
with A/E24T-169/198 Test Set
1b - - - - -
7.5.12 ADU-552 Launcher Adapter
* 7.5.12.1 Remove 2b - - - - -
7.5.12.2 Disassemble - - - - - -
7.5.12.3 Inspect - - - - - -
7.5.12.4 Repair - - - - - -
7.5.12.5 Assemble - - - - - -
* 7.5.12.6 Install 2b - - - - -
7.5.12.7 Bench Check with A/E24T-
170/197 Test Set
- - - - - -
F-15 Aircraft
78 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.5.13 LAU-128 Launcher
* 7.5.13.1 Remove 2b - - - - -
* 7.5.13.2 Disassemble B 2b - - - - -
* 7.5.13.3 Inspect B 2b - - - - -
7.5.13.4 Repair - - - - - -
* 7.5.13.5 Assemble B 2b - - - - -
* 7.5.13.6 Install 2b - - - - -
* 7.5.13.7 Perform Functional Check with
A/E24T-171/199 Test Set
2b - - - - -
* 7.5.13.8 Perform Bench Check with
A/E24T-170/197 Test Set
2b - - - - -
* 7.5.13.9 Perform Operational Check
with A/E24T-169/198 Test Set
2b - - - - -
* 7.5.13.10 Perform Detent Test 2b - - - - -
7.5.14
7.5.15
7.5.16 SUU-20
7.5.16.1 Remove - - - - - -
7.5.16.2 Disassemble - - - - - -
7.5.16.3 Inspect - - - - - -
7.5.16.4 Repair - - - - - -
7.5.16.5 Assemble - - - - - -
7.5.16.6 Install - - - - - -
7.5.16.7 Perform Functional Check with
A/E24T-171/199 Test Set
- - - - - -
7.5.16.8 Perform Bench Check with
A/E24T-197 Test Set
- - - - - -
7.5.17 Handling Adapters
7.5.17.1 Pylon Handling Adapter
* 7.5.17.1.1 Inspect - - - - - -
7.5.17.1.2 Maintain - - - - - -
* 7.5.17.1.3 Use - - - - - -
7.5.17.2 Universal Pylon Loading
Adapter
7.5.17.2.1 Inspect 1b - - - - -
7.5.17.2.2 Maintain - - - - - -
7.5.17.2.3 Use 1b - - - - -
7.5.17.3 Pylon Installation Adapter
7.5.17.3.1 Inspect - - - - - -
7.5.17.3.2 Maintain - - - - - -
7.5.17.3.3 Use - - - - - -
7.5.18 Conformal Fuel Tank (CFT)
7.5.18.1 Perform Fault Isolation with
A/E24T-197 Test Set
- - - - - -
7.5.18.2 Perform Operational Check
with A/E24T-198
- - - - - -
7.5.19 CFT Transport Dolly
7.5.19.1 Inspect - - - - - -
7.5.19.2 Use - - - - - -
7.5.20 Residual Fuel CFT Handling - - - - - -
F-15 Aircraft
79 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.5.21 BRU-46 / 47 Fairing Assembly
(CFT)
7.5.21.1 Remove - - - - - -
7.5.21.2 Inspect - - - - - -
7.5.21.3 Install - - - - - -
7.6 Perform Basic Post-Flight
Inspections
7.6.1 F-15A-D Model TR: 1F-15A-6, 1F-15A-2-94JG-31-1,
1F-15A-2-94JG-32-1, 1F-15A-2-94JG-
50-3
7.6.1.1 M61 Gun - - - - - -
7.6.1.2 LAU-106 Launcher - - - - - -
7.6.1.3 LAU-128 Launcher - - - - - -
7.6.1.4 MAU-12 Bomb Rack - - - - - -
7.6.1.5 SUU-59 Pylon - - - - - -
7.6.1.6 SUU-60 Pylon - - - - - -
7.6.2 F-15E TR: TOs 1F-15E-6, 1F-15E-2-94JG-
50-3, 1F-15E-2-94JG-31-1, 1F-15E-2-94JG-32-1
7.6.2.1 BRU-61 - - - - - -
7.6.2.2 M61 Gun - - - - - -
7.6.2.3 LAU-106 Launcher - - - - - -
7.6.2.4 LAU-128 Launcher - - - - - -
7.6.2.5 SUU-20 Dispenser - - - - - -
7.6.2.6 SUU-59 Pylon - - - - - -
7.6.2.7 SUU-73 Pylon - - - - - -
7.7 Armament System
Components TR: TOs 1F-15E-2-27JG-10-3, 1F-
15E-2-31JG-12-1, 1F-15E-2-94JG-32-
1, 1F-15E-33-1-2, 1F-15E-2-94GS-
Series, 1F-15()-2-94JG-10-1, 1F-15A-2-94JG-31-3, 1F-15A-2-94JG-31-4,
1F-15A-2-94JG-31-6, 1F-15()-33-1-2,
16W6-25-8-1
* 7.7.1 Component Functions A - - - - -
7.7.2 Converter Programmer
* 7.7.2.1 Remove 1b - - - - -
* 7.7.2.2 Install 1b - - - - -
* 7.7.2.3 Perform Operational Check
(PACS BIT Check)
2b - - - - -
7.7.3 Armament Control Panel
7.7.3.1 Remove - - - - - -
7.7.3.2 Install - - - - - -
7.7.3.3 Perform Operational Check
(PACS BIT Check)
- - - - - -
7.7.4 Multipurpose Color Display
7.7.4.1 Remove - - - - - -
7.7.4.2 Install - - - - - -
7.7.4.3 Perform Operational Check
(MPCD/PACS BIT Check)
- - - - - -
F-15 Aircraft
80 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.7.5 Master Armament Bus Control
Contactor
7.7.5.1 Remove - - - - - -
7.7.5.2 Install - - - - - -
7.7.5.3 Perform Operational Check
(PACS BIT Check)
- - - - - -
7.7.6 Armament 1553 Mux Bus
Coupling Transformer
7.7.6.1 Remove - - - - - -
7.7.6.2 Install - - - - - -
7.7.6.3 Perform Operational Check
(PACS BIT Check)
- - - - - -
7.7.7 Armament Bus Control
Contactor
7.7.7.1 Remove - - - - - -
7.7.7.2 Install - - - - - -
7.7.7.3 Perform Operational Check
(PACS BIT Check)
- - - - - -
7.7.8 Emergency Jett Switch
7.7.8.1 Remove - - - - - -
7.7.8.2 Install - - - - - -
7.7.8.3 Perform PACS BIT Check - - - - - -
7.7.9 Missile Launcher Auxiliary
Relay Panel
7.7.9.1 Remove - - - - - -
7.7.9.2 Install - - - - - -
7.7.9.3 Perform Operational Check
with A/E24T-169/198 Test Set
- - - - - -
7.7.10 PACS Termination Resistor
Assembly (Left and Right)
7.7.10.1 Remove - - - - - -
7.7.10.2 Install - - - - - -
7.7.10.3 Perform Operational Check
with A/E24T-169 / 198 Test
Set
- - - - - -
7.7.11 Flight Control Stick Grip
7.7.11.1 Remove - - - - - -
7.7.11.2 Install - - - - - -
7.7.11.3 Perform Operational Check - - - - - -
7.7.12 Armament Safety Switch
7.7.12.1 Remove - - - - - -
7.7.12.2 Install - - - - - -
7.7.12.3 Perform PACS BIT Check - - - - - -
7.7.13 Left / Right Hand Controller
7.7.13.1 Remove - - - - - -
7.7.13.2 Install - - - - - -
7.7.13.3 Perform Operational Check - - - - - -
7.7.14 Nuclear Consent Panel
7.7.14.1 Remove - - - - - -
7.7.14.2 Install - - - - - -
F-15 Aircraft
81 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
7.7.14.3 Perform Nuclear Weapons
Release Check (CAT D) with
A/E24T-198 Test Set
- - - - - -
7.7.15 Encoder / Decoder
7.7.15.1 Remove - - - - - -
7.7.15.2 Install - - - - - -
7.7.15.3 Perform Encoder / Decoder
Bench Check with A/E-24T-
197 Test Set
- - - - - -
7.7.15.4 Perform Nuclear Weapons
Release Check (CAT D) with
A/E24T-198 Test Set
- - - - - -
7.7.16 Power Supply
7.7.16.1 Remove - - - - - -
7.7.16.2 Install - - - - - -
7.7.16.3 Perform Power Supply Bench
Check with A/E-24T-197 Test
Set
- - - - - -
7.7.16.4 Perform Nuclear Weapons
Release Check (CAT D) with
A/E24T-198 Test Set
- - - - - -
7.7.17 Electronic Sequencing Unit
(ESU)
7.7.17.1 Remove - - - - - -
7.7.17.2 Install - - - - - -
7.7.17.3 Perform Bench Check with
A/E24T-197 Test Set
- - - - - -
7.7.17.4 Perform Operational Check
with A/E24T-198 Test Set
- - - - - -
7.8 Test Equipment TR: TOs 31R4-2PSN11-1, 33D5-3-46-
1, 33D5-3-46-4, 33D5-3-50-1, 33D5-
3-50-4, 33D5-12-231-1, 33D5-12-231-
4, 33D5-16-72-1, 33D5-16-72-4, 33D5-30-4-1, 33D5-30-4-4, 33D5-53-
13-1, 33D5-63-5-1, 33D5-63-5-4,
33D9-54-7-42
7.8.1 Description - - - - - -
7.8.2 Familiarization
7.8.2.1 A/E24T-169 - - - - - -
7.8.2.2 A/E24T-170 - - - - - -
7.8.2.3 A/E24T-171 - - - - - -
* 7.8.2.4 A/E24T-197 A - - - - -
* 7.8.2.5 A/E24T-198 A - - - - -
* 7.8.2.6 A/E24T-199 A - - - - -
* 7.8.2.7 Proofload Tester A - - - - -
* 7.8.2.8 Detent Tester A - - - - -
* 7.8.2.9 AN/GYQ-79 (CMBRE) A - - - - -
7.8.3 Inspect
7.8.3.1 A/E24T-169 - - - - - -
7.8.3.2 A/E24T-170 - - - - - -
7.8.3.3 A/E24T-171 - - - - - -
* 7.8.3.4 A/E24T-197 1a - - - - -
F-15 Aircraft
82 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 7.8.3.5 A/E24T-198 1a - - - - -
* 7.8.3.6 A/E24T-199 1a - - - - -
* 7.8.3.7 Proofload Tester 1a - - - - -
* 7.8.3.8 Detent Tester 1a - - - - -
* 7.8.3.9 AN/GYQ-79 (CMBRE) 1a - - - - -
7.8.4 Maintain
7.8.4.1 A/E24T-169 - - - - - -
7.8.4.2 A/E24T-170 - - - - - -
7.8.4.3 A/E24T-171 - - - - - -
7.8.4.4 A/E24T-197 - - - - - -
7.8.4.5 A/E24T-198 - - - - - -
7.8.4.6 A/E24T-199 - - - - - -
7.8.4.7 Proofload Tester - - - - - -
7.8.4.8 Detent Tester - - - - - -
7.8.4.9 AN/GYQ-79 (CMBRE) - - - - - -
7.8.5 Repair
7.8.5.1 A/E24T-169 - - - - - -
7.8.5.2 A/E24T-170 - - - - - -
7.8.5.3 A/E24T-171 - - - - - -
7.8.5.4 A/E24T-197 - - - - - -
7.8.5.5 A/E24T-198 - - - - - -
7.8.5.6 A/E24T-199 - - - - - -
7.8.5.7 Proofload Tester - - - - - -
7.8.5.8 Detent Tester - - - - - -
7.8.5.9 AN/GYQ-79 (CMBRE) - - - - - -
7.8.6 Use Special Programming
Equipment
7.8.6.1 Cryptovariable Keyer (KYK-
13)
- - - - - -
7.8.6.2 Precision Lightweight GPS
Receiver (AN/PSN-11)
- - - - - -
7.8.6.3 AN/CYZ-10 Data Transfer
Device
- - - - - -
7.9 Fault Isolation Procedures TR: TOs 1F-15A-2-00FR-WA-1, 1F-
15()-2-05JG-00-1, 1F-15()-2-94FI-00-1, 1F-15()-2-94JG-10-1, 1F-15()-2-
94JG-31-Series, 1F-15()-2-94JG-32-
Series, 1F-15()-2-94JG-50-Series, 1F-15()-2-94SD-00-1, 1F-15()-2-94WD-
00-1, 1F-15()-6, 1F-15()-33-1-2,
11B29-3-25-2, 11L1-2-24-2, 11L1-3-29-2, 11LA8-10-2, 16W6-25-2, 16W6-
25-12
* 7.9.1 Principles of Troubleshooting A - - - - -
* 7.9.2 Use Fault Isolation Technical
Order
1a - - - - -
* 7.9.3 Use Schematic/Wiring
Diagrams
1a - - - - -
* 7.9.4 Troubleshoot Circuits 1a - - - - -
7.10 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1F-15()-33-1-2
* 7.10.1 Characteristics A - - B - -
7.10.2 Nonnuclear
F-15 Aircraft
83 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge And Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level
C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials Trainer
Initials Certifier
Initials (1)
Crse (2)
CDC (1)
Crse (2)
CDC (1)
Crse (2)
CDC
* 7.10.2.1 Load F 1b - - - - -
* 7.10.2.2 Unload F 1b - - - - -
7.10.3 Nuclear
7.10.3.1 Load - - - - - -
7.10.3.2 Unload - - - - - -
F-16 Aircraft
84 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8 F-16 AIRCRAFT
8.1 Aerospace Ground Equipment TR: TOs 1-1A-15, 11-1-38, 11LA8-13-
3, 11N-B1004-1, 34Y1-87-11, 35C2-3-
372-11, 35D3-2-25-1, 35D3-9-23-1,
35DA3-6-37-1, 35D5-3-8-31, 35E9-90-11, 35F5-5-11-31, 35F5-5-16-1
TR: ?????
* 8.1.1 Description A - - B - -
8.1.2 MJ-1 Aerial Stores Lift Truck
* 8.1.2.1 Inspect 3b - - - - -
* 8.1.2.2 Operate 3b - - - - -
* 8.1.2.3 Drive 3b - - - - -
8.1.3 MHU-83 Munitions Handling /
Loading Lift Truck
* 8.1.3.1 Inspect 1b - - - - -
* 8.1.3.2 Operate 1b - - - - -
* 8.1.3.3 Drive 1b - - - - -
8.1.4 A/M32A-60 Generator Set
* 8.1.4.1 Inspect 2b - - - - -
* 8.1.4.2 Operate 2b - - - - -
8.1.5 A/M32A-86 Generator Set
8.1.5.1 Inspect - - - - - -
8.1.5.2 Operate - - - - - -
8.1.6 A/M32C-10 Air Conditioner - - - - - -
* 8.1.6.1 Inspect 2b - - - - -
* 8.1.6.2 Operate 2b - - - - -
8.1.7 Munitions Handling Trailers
* 8.1.7.1 Inspect 1b - - - - -
* 8.1.7.2 Load / Unload 1b - - - - -
8.1.7.3 Tie-Down Procedures - - - - - -
8.1.8 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
8.1.8.1 Inspect - - - - - -
8.1.8.2 Maintain - - - - - -
8.1.9 TF-1 Floodlight Set
8.1.9.1 Inspect - - - - - -
8.1.9.2 Operate - - - - - -
8.1.10 FL-1D Floodlight Set
8.1.10.1 Inspect - - - - - -
8.1.10.2 Operate - - - - - -
8.1.11 ADU-537A/E Missile-
Munitions Loading Adapter
* 8.1.11.1 Inspect 1b - - - - -
8.1.11.2 Maintain - - - - - -
* 8.1.11.3 Operate 1b - - - - -
8.2 Aircraft Familiarization TR: TOs 1F-16()-16, 1F-16()-2-94GS-
00-1, 1F-16()-2-10JG-00-1, 1F-16C-33-1-2
* 8.2.1 Aircraft Switches, Controls, and
Indicators
B - - - - -
* 8.2.2 Aircraft Safety Devices B - - - - -
* 8.2.3 Aircraft Danger Areas B - - - - -
F-16 Aircraft
85 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 8.2.4 Perform Aircraft Safe for
Maintenance Procedures
F 3b - - - - -
* 8.2.5 Apply / Remove Aircraft
External Electrical Power
2b - - - - -
8.3 Gun System TR: TOs 1F-16()-2-94JG-50-Series, 1F-
16C-2-94FI-00-1, 1F-16C-33-1-2,
11W1-7-16-2, 11W1-12-4-32
* 8.3.1 Nomenclature B - - - - -
* 8.3.2 Function of Parts B - - - - -
* 8.3.3 Theory of Operation B - - - - -
* 8.3.4 Perform Safing and Clearing
Procedures
F 3b - - - - -
* 8.3.5 Malfunctions / Jams * A - - - - -
* 8.3.6 Perform Functional Check with
16U75060 Test Set
1b - - - - -
* 8.3.7 Perform Operational Check
with 16U75060 Test Set
1b - - - - -
8.3.8 Perform Operational Check
with Stores System Tester
(SST) O-Level Test Set
(16U75A47002G001)
- - - - - -
8.3.9 M61A1 Gun
* 8.3.9.1 Nomenclature B - - - - -
* 8.3.9.2 Function of Parts B - - - - -
* 8.3.9.3 Cycle of Operation B - - - - -
* 8.3.9.4 Remove 2b - - - - -
* 8.3.9.5 Disassemble 2b - - - - -
* 8.3.9.6 Inspect 1b - - - - -
8.3.9.7 Repair - - - - - -
* 8.3.9.8 Assemble 2b - - - - -
* 8.3.9.9 Install 2b - - - - -
8.3.9.10 Boresight - - - - - -
* 8.3.9.11 Perform Performance Check In-
Shop
2b - - - - -
8.3.10 Gun Aft Mount Assembly
8.3.10.1 Remove - - - - - -
8.3.10.2 Install - - - - - -
8.3.11 Hydraulic Drive Assembly
8.3.11.1 Remove - - - - - -
8.3.11.2 Install - - - - - -
8.3.11 Ammunition Handling Set
* 8.3.12.1 Remove 2b - - - - -
8.3.12.2 Inspect - - - - - -
* 8.3.12.3 Install 2b - - - - -
* 8.3.12.4 Adjust Slack b - - - - -
8.3.12.5 Ammunition Drum Assembly
8.3.12.5.1 Remove - - - - - -
8.3.12.5.2 Disassemble - - - - - -
8.3.12.5.3 Inspect - - - - - -
8.3.12.5.4 Repair - - - - - -
8.3.12.5.5 Assemble - - - - - -
F-16 Aircraft
86 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.3.12.5.6 Install - - - - - -
8.3.12.6 Entrance Unit
8.3.12.6.1 Remove - - - - - -
8.3.12.6.2 Disassemble - - - - - -
8.3.12.6.3 Inspect - - - - - -
8.3.12.6.4 Repair - - - - - -
8.3.12.6.5 Assemble - - - - - -
8.3.12.6.6 Install - - - - - -
8.3.12.7 Exit Unit
8.3.12.7.1 Remove - - - - - -
8.3.12.7.2 Disassemble - - - - - -
8.3.12.7.3 Inspect - - - - - -
8.3.12.7.4 Repair - - - - - -
8.3.12.7.5 Assemble - - - - - -
8.3.12.7.6 Install - - - - - -
8.3.12.8 Transfer Unit
8.3.12.8.1 Remove - - - - - -
8.3.12.8.2 Disassemble - - - - - -
8.3.12.8.3 Inspect - - - - - -
8.3.12.8.4 Repair - - - - - -
8.3.12.8.5 Assemble - - - - - -
8.3.12.8.6 Install - - - - - -
8.3.12.9 Access Unit
8.3.12.9.1 Remove - - - - - -
8.3.12.9.2 Disassemble - - - - - -
8.3.12.9.3 Inspect - - - - - -
8.3.12.9.4 Repair - - - - - -
8.3.12.9.5 Assemble - - - - - -
8.3.12.9.6 Install - - - - - -
8.3.12.10 Conveyor Assembly
8.3.12.10.1 Remove - - - - - -
8.3.12.10.2 Disassemble - - - - - -
8.3.12.10.3 Inspect - - - - - -
8.3.12.10.4 Repair - - - - - -
8.3.12.10.5 Assemble - - - - - -
8.3.12.10.6 Install - - - - - -
8.3.12.11 Main Gun Drive Assembly
8.3.12.11.1 Remove - - - - - -
8.3.12.11.2 Disassemble - - - - - -
8.3.12.11.3 Inspect - - - - - -
8.3.12.11.4 Repair - - - - - -
8.3.12.11.5 Assemble - - - - - -
8.3.12.11.6 Install - - - - - -
8.3.13 Transfer Unit Checking Fixture
8.3.13.1 Inspect - - - - - -
8.3.13.2 Operate - - - - - -
8.3.14 Entrance / Exit Checking
Fixture
8.3.14.1 Inspect - - - - - -
8.3.14.2 Operate - - - - - -
F-16 Aircraft
87 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.3.15 Conveyor Element Checking
Fixture
8.3.15.1 Inspect - - - - - -
8.3.15.2 Operate - - - - - -
8.4 Ammunition Loading Systems TR: TOs 35D2-19-1, 35D30-4-11-1,
35D-30-4-15-1, 1F-16C-33-1-2
* 8.4.1 Nomenclature A - - - - -
* 8.4.2 Theory of Operation A - - - - -
* 8.4.3 Use UALS / LALS 2b - - - - -
8.4.4 Universal Ammunition Loading
System (UALS)
8.4.4.1 Drum
8.4.4.1.1 Remove - - - - - -
8.4.4.1.2 Disassemble - - - - - -
8.4.4.1.3 Inspect - - - - - -
8.4.4.1.4 Repair - - - - - -
8.4.4.1.5 Assemble - - - - - -
8.4.4.1.6 Install - - - - - -
8.4.4.2 Conveyor / Assembly
8.4.4.2.1 Remove - - - - - -
8.4.4.2.2 Disassemble - - - - - -
8.4.4.2.3 Inspect - - - - - -
8.4.4.2.4 Repair - - - - - -
8.4.4.2.5 Assemble - - - - - -
8.4.4.2.6 Install - - - - - -
8.4.4.3 Interface Unit
8.4.4.3.1 Remove - - - - - -
8.4.4.3.2 Disassemble - - - - - -
8.4.4.3.3 Inspect - - - - - -
8.4.4.3.4 Repair - - - - - -
8.4.4.3.5 Assemble - - - - - -
8.4.4.3.6 Install - - - - - -
8.4.4.4 Conveyor Element Checking
Fixture
8.4.4.4.1 Inspect - - - - - -
8.4.4.4.2 Operate - - - - - -
8.4.4.5 UALS Interface Unit Checking
Fixture
8.4.4.5.1 Inspect - - - - - -
8.4.4.5.2 Operate - - - - - -
8.4.4.6 UALS Entrance / Exit Unit
Checking Fixture
8.4.4.6.1 Inspect - - - - - -
8.4.4.6.2 Operate - - - - - -
8.4.5 Linkless Ammunition Loading
System (LALS)
8.4.5.1 Storage Container
8.4.5.1.1 Remove - - - - - -
8.4.5.1.2 Disassemble - - - - - -
8.4.5.1.3 Inspect - - - - - -
8.4.5.1.4 Repair - - - - - -
F-16 Aircraft
88 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.4.5.1.5 Assemble - - - - - -
8.4.5.1.6 Install - - - - - -
8.4.5.2 Conveyor / Assembly
8.4.5.2.1 Remove - - - - - -
8.4.5.2.2 Disassemble - - - - - -
8.4.5.2.3 Inspect - - - - - -
8.4.5.2.4 Repair - - - - - -
8.4.5.2.5 Assemble - - - - - -
8.4.5.2.6 Install - - - - - -
8.4.5.3 Interface Unit
8.4.5.3.1 Remove - - - - - -
8.4.5.3.2 Disassemble - - - - - -
8.4.5.3.3 Inspect - - - - - -
8.4.5.3.4 Repair - - - - - -
8.4.5.3.5 Assemble - - - - - -
8.4.5.3.6 Install - - - - - -
8.4.5.4 Transfer Unit
8.4.5.4.1 Remove - - - - - -
8.4.5.4.2 Disassemble - - - - - -
8.4.5.4.3 Inspect - - - - - -
8.4.5.4.4 Repair - - - - - -
8.4.5.4.5 Assemble - - - - - -
8.4.5.4.6 Install - - - - - -
8.4.6 Universal Delinker Loader - - - - - -
8.4.6.1 Nomenclature - - - - - -
8.4.6.2 Theory of Operation - - - - - -
8.4.6.3 Disassemble - - - - - -
8.4.6.4 Inspect - - - - - -
8.4.6.5 Repair - - - - - -
8.4.6.6 Assemble - - - - - -
8.4.6.7 Use - - - - - -
8.4.7 Ammunition Loading System
Replenisher
8.4.7.1 Nomenclature - - - - - -
8.4.7.2 Theory Of Operation - - - - - -
8.4.7.3 Disassemble - - - - - -
8.4.7.4 Inspect - - - - - -
8.4.7.5 Repair - - - - - -
8.4.7.6 Assemble - - - - - -
8.4.7.7 Use - - - - - -
8.5 Stores Suspension Equipment TR: TOs 1F-16()-2-94JG-30-Series, 1F-
16C-33-1-2, 1F-16()-2-94GS-00-1, 1F-
16()-6, 1F-16()-6-11, 11B29-3-25-2, 11B29-3-25-7-1, 11B29-3-28-1, 11B29-
3-28-7-1, 11B29-3-35-2, 11B29-3-71-1,
11L1-2-10-1, 11L1-2-10-7-1, 11L1-2-15-1, 11L1-2-16-2, 11L1-2-20-1, 11L1-
2-24-2, 11L1-2-30-1, 11L1-3-27-1,
11LA8-9-2, 16W6-40-2, 16W6-42-2, 16W6-51-2, 16W6-52-2, 16W6-53-2,
33D5-53-13-1, 33D5-63-2-1, 33D9-57-
1
* 8.5.1 Description A - - - - -
F-16 Aircraft
89 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 8.5.2 Theory of Operation A - - - - -
* 8.5.3 Function of Parts A - - - - -
8.5.4 Wing Weapons Pylon
* 8.5.4.1 Remove 2b - - - - -
8.5.4.2 Disassemble - - - - - -
8.5.4.3 Inspect - - - - - -
8.5.4.4 Repair - - - - - -
8.5.4.5 Assemble - - - - - -
* 8.5.4.6 Install 2b - - - - -
8.5.4.7 Perform Operational Check
with 16U75501 / SST O-Level
Test Set
- - - - - -
8.5.4.8 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.4.9 Perform Operational Check
with RNRIU Installed
- - - - - -
* 8.5.4.10 Perform Functional Check with
16U75060 Test Set
1b - - - - -
8.5.5 16S1501 Pylon / Launcher
8.5.5.1 Remove - - - - - -
8.5.5.2 Disassemble - - - - - -
8.5.5.3 Inspect - - - - - -
8.5.5.4 Repair - - - - - -
8.5.5.5 Assemble - - - - - -
8.5.5.6 Install - - - - - -
8.5.5.7 Perform Bench Check with
Pylon / Launcher Test Set
- - - - - -
8.5.6 ALE-50 Pylon
8.5.6.1 Remove - - - - - -
8.5.6.2 Disassemble - - - - - -
8.5.6.3 Inspect - - - - - -
8.5.6.4 Repair - - - - - -
8.5.6.5 Assemble - - - - - -
8.5.6.6 Install - - - - - -
8.5.6.7 Perform Functional Check with
G132973-1 Fault Isolation
System Tester (FIST)
- - - - - -
8.5.7 Centerline Pylon
* 8.5.7.1 Remove 1b - - - - -
8.5.7.2 Disassemble - - - - - -
8.5.7.3 Inspect - - - - - -
8.5.7.4 Repair - - - - - -
8.5.7.5 Assemble - - - - - -
* 8.5.7.6 Install 1b - - - - -
8.5.7.7 Perform Functional Check with
16U75060 Test Set
- - - - - -
8.5.7.8 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
F-16 Aircraft
90 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.5.7.9 Perform Operational Check
with 16U75501 / SST O-Level
Test Set
- - - - - -
8.5.7.10 Perform Operational Check
with RNRIU Installed
- - - - - -
8.5.8 MAU-12
* 8.5.8.1 Remove 2b - - - - -
* 8.5.8.2 Disassemble B 2b - - - - -
* 8.5.8.3 Inspect B 2b - - - - -
8.5.8.4 Repair - - - - - -
* 8.5.8.5 Assemble B 2b - - - - -
* 8.5.8.6 Install 2b - - - - -
8.5.8.7 Perform Bench Check with
MAU-12/40/50 Test Set
- - - - - -
* 8.5.8.8 Perform Bench Check with
16U75500 / SST I-Level Test
Set
2b - - - - -
* 8.5.8.9 Perform Weight Check with
Proofload Tester
2b - - - - -
8.5.9 BRU-46
8.5.9.1 Remove - - - - - -
8.5.9.2 Disassemble - - - - - -
8.5.9.3 Inspect - - - - - -
8.5.9.4 Repair - - - - - -
8.5.9.5 Assemble - - - - - -
8.5.9.6 Install - - - - - -
8.5.9.7 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.9.8 Perform Weight Check with
Proofload Tester
- - - - - -
8.5.10 BRU-57
* 8.5.10.1 Remove 1b - - - - -
8.5.10.2 Disassemble - - - - - -
8.5.10.3 Inspect - - - - - -
8.5.10.4 Repair - - - - - -
8.5.10.5 Assemble - - - - - -
* 8.5.10.6 Install 1b - - - - -
8.5.10.7 Perform Functional Check with
16U75060 Test Set
- - - - - -
8.5.10.8 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.11 BRU-61
8.5.11.1 Remove 2b - - - - -
8.5.11.2 Disassemble - - - - - -
8.5.11.3 Inspect - - - - - -
8.5.11.4 Repair - - - - - -
8.5.11.5 Assemble - - - - - -
8.5.11.6 Install 2b - - - - -
F-16 Aircraft
91 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.5.11.7 Perform Bench Check with
AN/GYQ-79 Test Set
2b - - - - -
8.5.12 AIM-9 Launcher
8.5.12.1 Remove - - - - - -
8.5.12.2 Disassemble - - - - - -
8.5.12.3 Inspect - - - - - -
8.5.12.4 Repair - - - - - -
8.5.12.5 Assemble - - - - - -
8.5.12.6 Install - - - - - -
8.5.12.7 Perform Functional Check with
16U75060 Test Set
- - - - - -
8.5.12.8 Perform Operational Check
with 16U75501 / SST O-Level
Test Set
- - - - - -
8.5.12.9 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.12.10 Perform Detent Test - - - - - -
8.5.13 LAU-129 Launcher
* 8.5.13.1 Remove 2b - - - - -
* 8.5.13.2 Disassemble B 2b - - - - -
* 8.5.13.3 Inspect B 2b - - - - -
8.5.13.4 Repair - - - - - -
* 8.5.13.5 Assemble B 2b - - - - -
* 8.5.13.6 Install 2b - - - - -
* 8.5.13.7 Perform Functional Check with
16U75060 Test Set
2b - - - - -
8.5.13.8 Perform Operational Check
with 16U75501 / SST O-Level
Test Set
- - - - - -
* 8.5.13.9 Perform Bench Check with
16U75500 / SST I-Level Test
Set
2b - - - - -
* 8.5.13.10 Perform Detent Test 2b - - - - -
8.5.14 Launcher Adapter
* 8.5.14.1 Remove 2b - - - - -
8.5.14.2 Disassemble - - - - - -
8.5.14.3 Inspect - - - - - -
8.5.14.4 Repair - - - - - -
8.5.14.5 Assemble - - - - - -
* 8.5.14.6 Install 2b - - - - -
8.5.15 LAU-117
* 8.5.15.1 Remove 1b - - - - -
8.5.15.2 Disassemble - - - - - -
8.5.15.3 Inspect - - - - - -
8.5.15.4 Repair - - - - - -
8.5.15.5 Assemble - - - - - -
* 8.5.15.6 Install 1b - - - - -
8.5.15.7 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.16 LAU-118
F-16 Aircraft
92 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 8.5.16.1 Remove 1b - - - - -
8.5.16.2 Disassemble - - - - - -
8.5.16.3 Inspect - - - - - -
8.5.16.4 Repair - - - - - -
8.5.16.5 Assemble - - - - - -
* 8.5.16.6 Install 1b - - - - -
8.5.16.7 Perform Functional Check with
16U75060 Test set
- - - - - -
8.5.16.8 Perform Bench Check with
TTU-416 Test Set
- - - - - -
8.5.16.9 Perform Bench Check with
AN/GSM-369 Test Set
- - - - - -
8.5.16.10 Program using Enhanced
Diagnostic Aid (EDNA)
- - - - - -
8.5.17 LAU-131 Rocket Launcher
8.5.17.1 Remove - - - - - -
8.5.17.2 Disassemble - - - - - -
8.5.17.3 Inspect - - - - - -
8.5.17.4 Repair - - - - - -
8.5.17.5 Assemble - - - - - -
8.5.17.6 Install - - - - - -
8.5.17.7 Perform Functional Check with
16U75060 Test Set
- - - - - -
8.5.17.8 Perform Functional Check with
MK-III / MK-IV Tester
- - - - - -
8.5.18 SUU-20
* 8.5.18.1 Remove 1b - - - - -
8.5.18.2 Disassemble - - - - - -
8.5.18.3 Inspect - - - - - -
8.5.18.4 Repair - - - - - -
8.5.18.5 Assemble - - - - - -
* 8.5.18.6 Install 1b - - - - -
8.5.18.7 Perform Functional Check with
16U75060 Test Set
- - - - - -
8.5.18.8 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.19 TER-9A
* 8.5.19.1 Remove 2b - - - - -
* 8.5.19.2 Disassemble 1b - - - - -
* 8.5.19.3 Inspect 1b - - - - -
8.5.19.4 Repair - - - - - -
* 8.5.19.5 Assemble 1b - - - - -
* 8.5.19.6 Install 2b - - - - -
* 8.5.19.7 Perform Functional Check with
16U75060 Test Set
1b - - - - -
8.5.19.8 Perform Bench Check with
16U75500 / SST I-Level Test
Set
- - - - - -
8.5.19.9 Perform Weight Check with
Proofload Tester
- - - - - -
F-16 Aircraft
93 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.6 Perform Basic Post-Flight
Inspections TR: TOs 1F-16()-6, 1F-16()-6-11, 1F-
16()-2-94JG-30-Series, 1F-16()-2-94JG-
50-1
* 8.6.1 TER-9A 3b - - - - -
8.6.2 Gun - - - - - -
* 8.6.3 MAU-12 Bomb Rack 3b - - - - -
8.6.4 AIM-9 Missile Launcher - - - - - -
8.6.5 LAU-117 Launcher - - - - - -
8.6.6 LAU-118 Launcher - - - - - -
8.6.7 LAU-129 Launcher - - - - - -
8.6.8 SUU-20 Dispenser - - - - - -
8.6.9 LAU-131 Rocket Launcher - - - - - -
8.6.10 ALE-50 Launcher Controller - - - - - -
8.6.11 BRU-57 - - - - - -
8.6.12 BRU-61 - - - - - -
8.7 Armament Systems
Components TR: TOs 1F-16()-2-94JG-10-Series, 1F-
16()-2-94JG-30-Series, 1F-16()-2-94JG-
50-2, 1F-16()-2-94JG-70-3, 11L1-2-16-2, 11L1-2-30-1, 12P3-2ALE50-2
* 8.7.1 Component Functions A - - - - -
8.7.2 Conventional RIU / ACRIU
8.7.2.1 Remove - - - - - -
8.7.2.2 Install - - - - - -
8.7.3 Missile RIU / AMRIU
* 8.7.3.1 Remove 1b - - - - -
* 8.7.3.2 Install 1b - - - - -
8.7.4 Ruggedized Nuclear RIU
8.7.4.1 Remove - - - - - -
8.7.4.2 Install - - - - - -
8.7.5 Jettison / Release RIU
8.7.5.1 Remove - - - - - -
8.7.5.2 Install - - - - - -
8.7.6 Stores Control Panel / MFD
8.7.6.1 Remove - - - - - -
8.7.6.2 Install - - - - - -
8.7.7 Central Interface Unit / ACIU /
CCIU
8.7.7.1 Remove - - - - - -
8.7.7.2 Install - - - - - -
8.7.7.3 Viper - - - - - -
8.7.8 Master Arm and Release Matrix
8.7.8.1 Remove - - - - - -
8.7.8.2 Install - - - - - -
8.7.9 SMS Power Matrix
8.7.9.1 Remove - - - - - -
8.7.9.2 Install - - - - - -
8.7.10 Wing Stores Matrix
8.7.10.1 Remove - - - - - -
8.7.10.2 Install - - - - - -
F-16 Aircraft
94 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.7.11 STA #5 Stores Matrix
8.7.11.1 Remove - - - - - -
8.7.11.2 Install - - - - - -
8.7.12 Gun Control Unit
8.7.12.1 Remove - - - - - -
8.7.12.2 Install - - - - - -
8.7.13 ALE-50 Launcher Controller
8.7.13.1 Remove - - - - - -
8.7.13.2 Install - - - - - -
8.7.13.3 Viper - - - - - -
8.7.14 Perform Stores Management
System Confidence Check
- - - - - -
8.8 Test Equipment TR: TOs 11B29-3-25-2, 11B29-3-39-2,
11L1-3-27-1, 33D5-3-47-1, 33D5-53-1-
11, 33D5-53-13-1, 33D5-63-2-1, 33D5-63-2-21, 33D5-63-3-1, 33D7-13-231-1,
33D9-54-7-42, 33D7-75-34-1, 33D9-
45-42-1
8.8.1 Description - - - - - -
8.8.2 Familiarization
* 8.8.2.1 16U75060 Test Set A - - - - -
8.8.2.2 16U75501 Test Set - - - - - -
* 8.8.2.3 16U75500 Test Set - - - - - -
* 8.8.2.4 Stores System Tester (SST)
Instrument Unit
(16U75A46002G001)
A - - - - -
8.8.2.5 SST Organizational Level
Adapter Set
(16U75A47002G001)
- - - - - -
* 8.8.2.6 SST Intermediate Level
Adapter Set
(16U75A48002G001)
A - - - - -
8.8.2.7 MAU-12/40/50/ Tester - - - - - -
* 8.8.2.8 Detent Tester A - - - - -
* 8.8.2.9 Proofload Tester A - - - - -
8.8.2.10 MK-III / MK-IV Tester - - - - - -
8.8.2.11 Viper - - - - - -
8.8.2.12 G132973-1 Fault Isolation
System Tester (FIST)
- - - - - -
8.8.2.13 Multiplex Bus Fault Isolator - - - - - -
8.8.2.14 AN/GSM-396 (GM LTS) - - - - - -
8.8.2.15 AN/GYQ-79 (CMBRE) A - - - - -
8.8.3 Inspect
* 8.8.3.1 16U75060 Test Set 1a - - - - -
8.8.3.2 16U75501 Test Set - - - - - -
* 8.8.3.3 16U75500 Test Set - - - - - -
* 8.8.3.4 SST Instrument Unit 1a - - - - -
8.8.3.5 SST O-Level Adapter Set - - - - - -
* 8.8.3.6 SST I-Level Adapter Set 1a - - - - -
8.8.3.7 MAU-12/40/50 Tester - - - - - -
* 8.8.3.8 Detent Tester 1a - - - - -
* 8.8.3.9 Proofload Tester 1a - - - - -
F-16 Aircraft
95 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.8.3.10 MK-III / MK-IV Tester - - - - - -
8.8.3.11 Viper - - - - - -
8.8.3.12 G132973-1 Fault Isolation
System Tester (FIST)
- - - - - -
8.8.3.13 Multiplex Bus Fault Isolator - - - - - -
8.8.3.14 AN/GSM-396 (GM LTS) - - - - - -
8.8.3.15 AN/GYQ-79 (CMBRE) - - - - - -
8.8.4 Maintain
8.8.4.1 16U75060 Test Set - - - - - -
8.8.4.2 16U75501 Test Set - - - - - -
8.8.4.3 16U75500 Test Set - - - - - -
8.8.4.4 SST Instrument Unit - - - - - -
8.8.4.5 SST O-Level Adapter Set - - - - - -
8.8.4.6 SST I-Level Adapter Set - - - - - -
8.8.4.7 MAU-12/40/50 Tester - - - - - -
8.8.4.8 Detent Tester - - - - - -
8.8.4.9 Proofload Tester - - - - - -
8.8.4.10 MK-III / MK-IV Tester - - - - - -
8.8.4.11 Viper - - - - - -
8.8.4.12 G132973-1 Fault Isolation
System Tester (FIST)
- - - - - -
8.8.4.13 Multiplex Bus Fault Isolator - - - - - -
8.8.4.14 AN/GSM-396 (GM LTS) - - - - - -
8.8.4.15 AN/GYQ-79 (CMBRE) - - - - - -
8.8.5 Repair
8.8.5.1 16U75060 Test Set - - - - - -
8.8.5.2 16U75501 Test Set - - - - - -
8.8.5.3 16U75500 Test Set - - - - - -
8.8.5.4 SST Instrument Unit - - - - - -
8.8.5.5 SST O-Level Adapter Set - - - - - -
8.8.5.6 SST I-Level Adapter Set - - - - - -
8.8.5.7 MAU-12/40/50 Tester - - - - - -
8.8.5.8 Detent Tester - - - - - -
8.8.5.9 Proofload Tester - - - - - -
8.8.5.10 MK-III / MK-IV Tester - - - - - -
8.8.5.11 Multiplex Bus Fault Isolator - - - - - -
8.8.5.12 AN/GSM-396 (GM LTS) - - - - - -
8.8.5.13 AN/GYQ-79 (CMBRE) - - - - - -
8.9 Fault Isolation Procedures TR: TOs 1F-16()-2-94FI-00-1, 1F-16()-
2-94JG-00-1, 1F-16()-2-94WD-00-1-5
* 8.9.1 Principles of Troubleshooting A
* 8.9.2 Use Fault Isolation Technical
Orders
1a - - - - -
* 8.9.3 Use Schematics / Wiring
Diagrams
1a - - - - -
* 8.9.4 Troubleshoot Circuits 1a - - - - -
8.10 Cockpit Armament Controls TR: TOs 1F-16()-2-94JG-10-Series, 1F-
16()-2-94JG-Series
8.10.1 Armament Panels
8.10.1.1 Remove - - - - - -
F-16 Aircraft
96 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
8.10.1.2 Install - - - - - -
8.10.2 Armament Switches
8.10.2.1 Remove - - - - - -
8.10.2.2 Install - - - - - -
8.11 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1F-16()-16, 1F-16C-
33-1-2
* 8.11.1 Characteristics A - - B - -
8.11.2 Nonnuclear
* 8.11.2.1 Load F 1b - - - - -
* 8.11.2.2 Unload F 1b - - - - -
8.11.3 Nuclear
8.11.3.1 Load - - - - - -
8.11.3.2 Unload - - - - - -
F-16 Aircraft
97 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
F-22 Aircraft
98 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9 F-22 AIRCRAFT
9.1 Aerospace Ground Equipment TR: TOs 11-1-38, 34Y1-87-11, 35C2-
3-372-1, 35D3-2-25-1, 35D3-2-27-1,
35D5-3-8-31, 35E9-90-41
* 9.1.1 Description A - - B - -
9.1.2 MJ-1 Aerial Stores Lift Truck
* 9.1.2.1 Inspect 3b - - - - -
* 9.1.2.2 Operate 3b - - - - -
* 9.1.2.3 Drive 3b - - - - -
9.1.3 A/M32A-60 Generator Set
9.1.3.1 Inspect - - - - - -
9.1.3.2 Operate - - - - - -
9.1.4 A/M32A-86 Generator Set
* 9.1.4.1 Inspect 2b - - - - -
* 9.1.4.2 Operate 2b - - - - -
9.1.5 MC-2A Air Compressor
9.1.5.1 Inspect - - - - - -
9.1.5.2 Operate - - - - - -
9.1.6 Polyalphaolefin (PAO)
Cooling System
* 9.1.6.1 Inspect 1b - - - - -
* 9.1.6.2 Operate 1b - - - - -
9.1.7 A/M27T-12 Hydraulic Test
Stand (Mule)
9.1.7.1 Inspect - - - - - -
9.1.7.2 Operate - - - - - -
9.1.8 Munitions Handling Trailers
* 9.1.8.1 Inspect 1b - - - - -
* 9.1.8.2 Load / Unload 1b - - - - -
9.1.8.3 Tie-Down Procedures - - - - - -
9.1.9 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
9.1.9.1 Inspect - - - - - -
9.1.9.2 Maintain - - - - - -
9.1.10 TF-1 Floodlight Set
9.1.10.1 Inspect - - - - - -
9.1.10.2 Operate - - - - - -
9.1.11 FL-1D Floodlight Set
9.1.11.1 Inspect - - - - - -
9.1.11.2 Operate - - - - - -
9.1.12 MHU-194/E Lift Truck
9.1.12.1 Inspect - - - - - -
9.1.12.2 Operate - - - - - -
9.1.13 East/West Crane
* 9.1.13.1 Inspect 2b - - - - -
* 9.1.13.2 Operate 2b - - - - -
9.1.14 ADU-537A/E Missile-
Munitions Loading Adapter
* 9.1.14.1 Inspect 1b - - - - -
9.1.14.2 Maintain - - - - - -
* 9.1.14.3 Operate 1b - - - - -
F-22 Aircraft
99 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9.1.15 Nitrogen Cart
* 9.1.15.1 Inspect 1b - - - - -
* 9.1.15.2 Operate 1b - - - - -
9.2 Aircraft Familiarization TR: TOs 1-1A-1, IMIS
* 9.2.1 Aircraft Safety Devices B - - - - -
* 9.2.2 Aircraft Danger Areas B - - - - -
* 9.2.3 Aircraft Switches, Controls,
and Indicators
B - - - - -
* 9.2.4 Perform Aircraft Safe for
Maintenance Procedures
F 1b - - - - -
* 9.2.5 Remove / Install Panels 1b - - - - -
9.2.5.1 Open/Close Canopy 1b - - - - -
* 9.2.6 Apply / Remove Aircraft
External Electrical Power
1b - - - - -
* 9.2.7 Depressurize Aircraft
Hydraulic System
1b - - - - -
9.2.8 Integrated Maintenance
Information System (IMIS)
* 9.2.8.1 Overview A - - - - -
* 9.2.8.2 Components A - - - - -
* 9.2.8.3 Operation 3b - - - - -
9.2.8.4 Portable Maintenance Aid
(PMA)
* 9.2.8.4.1 Overview A - - - - -
* 9.2.8.4.2 Components A - - - - -
* 9.2.8.4.3 Operation 3b - - - - -
9.2.8.4.4 Parts Ordering - - - - - -
* 9.2.8.4.5 Connect / Disconnect to / from
Ground
3b - - - - -
9.2.8.4.6 Connect / Disconnect to / from
Pilot Station
- - - - - -
* 9.2.8.4.7 Upload / Download
Information to / from PMA
3b - - - - -
9.3 Auxiliary Power Generation
System TR: IMIS
* 9.3.1 Overview A - - - - -
* 9.3.2 Safety Hazards A - - - - -
* 9.3.3 PMA Operation 2b - - - - -
9.4 Aircraft Actuated Doors TR: IMIS
9.4.1 Main Weapons Bay Doors
* 9.4.1.1 PMA Operation 2b - - - - -
* 9.4.1.2 Manual Operation 2b - - - - -
* 9.4.1.3 Operational Check 2b - - - - -
9.4.1.4 Remove - - - - - -
9.4.1.5 Install - - - - - -
9.4.1.6 Rigging - - - - - -
9.4.2 Side Weapons Bay Doors
9.4.2.1 PMA Operation - - - - - -
9.4.2.2 Manual Operation - - - - - -
F-22 Aircraft
100 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9.4.2.3 Operational Check - - - - - -
9.4.2.4 Remove - - - - - -
9.4.2.5 Install - - - - - -
9.4.2.6 Rigging - - - - - -
9.4.3 Infrared Countermeasures
(IRCM) Door
* 9.4.3.1 PMA Operation 2b - - - - -
9.4.3.2 Operational Check - - - - - -
9.4.4 Weapons Doors Components TR: IMIS
9.4.4.1 AIM-120 Guides and
Restraints
9.4.4.1.1 Remove - - - - - -
9.4.4.1.2 Install - - - - - -
9.4.4.2 Side Weapons Bay Door Close
Inhibit Switch
9.4.4.2.1 Remove - - - - - -
9.4.4.2.2 Install - - - - - -
9.4.4.2.3 Adjust - - - - - -
9.4.4.3 Power Drive Unit
9.4.4.3.1 Main Weapons Bay
9.4.4.3.1.1 Remove - - - - - -
* 9.4.4.3.1.2 Inspect 2b - - - - -
9.4.4.3.1.3 Install - - - - - -
* 9.4.4.3.1.4 Service 2b - - - - -
9.4.4.3.2 Side Weapons Bay
9.4.4.3.2.1 Remove - - - - - -
9.4.4.3.2.2 Inspect - - - - - -
9.4.4.3.2.3 Install - - - - - -
9.4.4.3.2.4 Service - - - - - -
9.4.4.4 Open Sensor
9.4.4.4.1 Remove - - - - - -
9.4.4.4.2 Install - - - - - -
9.4.4.4.3 Adjust - - - - - -
9.4.4.5 Close Sensor
9.4.4.5.1 Remove - - - - - -
9.4.4.5.2 Install - - - - - -
9.4.4.5.3 Adjust - - - - - -
9.4.4.6 Weapons Bay Torque Tubes
9.4.4.6.1 Remove - - - - - -
9.4.4.6.2 Install - - - - - -
9.4.4.7 Weapons Bay Strut
9.4.4.7.1 Remove - - - - - -
9.4.4.7.2 Install - - - - - -
9.5 Stores Management System
(SMS) TR: IMIS
* 9.5.1 Overview B - - - - -
* 9.5.2 System Safety Hazards B - - - - -
9.5.3 Line Replaceable Modules
9.5.3.1 Remove 1b - - - - -
9.5.3.2 Install 1b - - - - -
F-22 Aircraft
101 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9.5.4 SMS Station Test
9.5.4.1 Master Arm Switch
Operational Check
- - - - - -
9.5.4.2 Jettison Switch Operational
Check
- - - - - -
9.5.4.3 Select Jettison Switch
Operational Check
- - - - - -
9.5.4.4 SMS I-BIT Checks - - - - - -
9.5.4.5 Stick Grip Switches
Operational Checks
- - - - - -
9.5.4.6 Throttle Switches Operational
Checks
- - - - - -
9.6 Gun System TR: IMIS, TO 11W1-12-15-2
* 9.6.1 Nomenclature B - - - - -
* 9.6.2 Function of Parts B - - - - -
* 9.6.3 Theory of Operation B - - - - -
* 9.6.4 Safety Hazards B - - - - -
* 9.6.5 Perform Safing and Clearing
Procedures
F 3b - - - - -
* 9.6.6 Malfunctions or Jams * A - - - - -
9.6.7 Gun Safing Door
9.6.7.1 Open - - - - - -
9.6.7.2 Close - - - - - -
9.6.7.3 Remove - - - - - -
9.6.7.4 Install - - - - - -
9.6.8 Gun Purge Door
9.6.8.1 Remove - - - - - -
9.6.8.2 Install - - - - - -
9.6.8.3 Operate Gun Purge Door 2b - - - - -
9.6.8.4 Gun Purge Door Actuator
9.6.8.4.1 Remove - - - - - -
9.6.8.4.2 Install - - - - - -
9.6.8.4.3 Adjust - - - - - -
9.6.9 M61A2 Gun
* 9.6.9.1 Nomenclature B - - - - -
* 9.6.9.2 Function of Parts B - - - - -
* 9.6.9.3 Cycle of Operation B - - - - -
* 9.6.9.4 Remove 2b - - - - -
* 9.6.9.5 Disassemble 2b - - - - -
* 9.6.9.6 Inspect 1b - - - - -
9.6.9.7 Repair - - - - - -
* 9.6.9.8 Assemble 2b - - - - -
* 9.6.9.9 Install 2b - - - - -
* 9.6.9.10 Perform In-Shop Performance
Check
2b - - - - -
9.6.10 Ammunition Container
* 9.6.10.1 Remove 2b - - - - -
9.6.10.2 Disassemble - - - - - -
9.6.10.3 Inspect - - - - - -
9.6.10.4 Repair - - - - - -
F-22 Aircraft
102 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9.6.10.5 Assemble - - - - - -
* 9.6.10.6 Install 2b - - - - -
9.6.10.7 Adjust Recoil Track - - - - - -
9.6.11 Ammunition Container Drive
Shaft
* 9.6.11.1 Remove 2b - - - - -
9.6.11.2 Inspect - - - - - -
* 9.6.11.3 Install 2b - - - - -
9.6.12 Ballastic Chute Cover
9.6.12.1 Remove - - - - - -
9.6.12.2 Inspect - - - - - -
9.6.12.3 Install - - - - - -
9.6.13 Transfer Unit
* 9.6.13.1 Remove 2b - - - - -
9.6.13.2 Disassemble - - - - - -
9.6.13.3 Inspect - - - - - -
9.6.13.4 Repair - - - - - -
9.6.13.5 Assemble - - - - - -
* 9.6.13.6 Install 2b - - - - -
9.6.14 Rounds Limit Switch
9.6.14.1 Remove - - - - - -
9.6.14.2 Install - - - - - -
9.6.15 Last Round Switch
9.6.15.1 Remove - - - - - -
9.6.15.2 Install - - - - - -
9.6.16 Gun Drive Shaft
* 9.6.16.1 Remove 2b - - - - -
9.6.16.2 Inspect - - - - - -
* 9.6.16.3 Install 2b - - - - -
9.6.17 Hydraulic Drive - - - - - -
9.6.17.1 Remove - - - - - -
9.6.17.2 Inspect - - - - - -
9.6.17.3 Install - - - - - -
9.6.18 Hydraulic Drive Unit Handle
9.6.18.1 Remove - - - - - -
9.6.18.2 Install - - - - - -
9.6.19 Gun Safe Actuator
9.6.19.1 Remove - - - - - -
* 9.6.19.2 Inspect 2b - - - - -
9.6.19.3 Install - - - - - -
9.6.19.4 Adjust - - - - - -
9.6.20 Gun Handling Adapter
* 9.6.20.1 Inspect 2b - - - - -
* 9.6.20.2 Use 2b - - - - -
9.6.21 Ammunition Container
Handling Adapter
* 9.6.21.1 Inspect 2b - - - - -
* 9.6.21.2 Use 2b - - - - -
9.7 Ammunition Loading Systems TR: TOs 35D30-4-10-1, 35D30-4-11-
1, 35D30-4-15-1
F-22 Aircraft
103 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 9.7.1 Nomenclature A - - - - -
* 9.7.2 Theory of Operation A - - - - -
* 9.7.3 Use UALS 2b - - - - -
9.7.4 Universal Ammunition
Loading Systems (UALS)
9.7.4.1 Drum
9.7.4.1.1 Remove - - - - - -
9.7.4.1.2 Disassemble - - - - - -
9.7.4.1.3 Inspect - - - - - -
9.7.4.1.4 Repair - - - - - -
9.7.4.1.5 Assemble - - - - - -
9.7.4.1.6 Install - - - - - -
9.7.4.2 Conveyor Assembly
9.7.4.2.1 Remove - - - - - -
9.7.4.2.2 Disassemble - - - - - -
9.7.4.2.3 Inspect - - - - - -
9.7.4.2.4 Repair - - - - - -
9.7.4.2.5 Assemble - - - - - -
9.7.4.2.6 Install - - - - - -
9.7.4.3 Interface Unit
9.7.4.3.1 Remove - - - - - -
9.7.4.3.2 Disassemble - - - - - -
9.7.4.3.3 Inspect - - - - - -
9.7.4.3.4 Repair - - - - - -
9.7.4.3.5 Assemble - - - - - -
9.7.4.3.6 Install - - - - - -
9.7.4.4 Conveyor Element Checking
Fixture
9.7.4.4.1 Inspect - - - - - -
9.7.4.4.2 Use - - - - - -
9.7.4.5 UALS Interface Unit Checking
Fixture
9.7.4.5.1 Inspect - - - - - -
9.7.4.5.2 Use - - - - - -
9.7.4.6 UALS Entrance / Exit Unit
Checking Fixture
9.7.4.6.1 Inspect - - - - - -
9.7.4.6.2 Use - - - - - -
9.7.5 Ammunition Loading System
Replenisher
9.7.5.1 Nomenclature - - - - - -
9.7.5.2 Theory Of Operation - - - - - -
9.7.5.3 Disassemble - - - - - -
9.7.5.4 Inspect - - - - - -
9.7.5.5 Repair - - - - - -
9.7.5.6 Assemble - - - - - -
9.7.5.7 Use - - - - - -
9.8 Stores Suspension Equipment TR: IMIS, TOs 11B29-3-60-2, 11B29-
3-61-2, 11L1-2-24-2, 16W6-56-2
* 9.8.1 Description A - - - - -
* 9.8.2 Theory of Operation A - - - - -
F-22 Aircraft
104 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 9.8.3 Function of Parts A - - - - -
9.8.4 Pylon
* 9.8.4.1 Remove 2b - - - - -
9.8.4.2 Disassemble - - - - - -
9.8.4.3 Inspect - - - - - -
9.8.4.4 Repair - - - - - -
9.8.4.5 Assemble - - - - - -
* 9.8.4.6 Install 2b - - - - -
9.8.4.7 Perform Bench Check using
TTU-584/E
- - - - - -
9.8.5 Pyrotechnic Arming Unit
9.8.5.1 Remove - - - - - -
9.8.5.2 Inspect - - - - - -
9.8.5.3 Install - - - - - -
9.8.6 LAU-141 (CRL) Launcher
* 9.8.6.1 Remove 2b - - - - -
9.8.6.2 Disassemble - - - - - -
9.8.6.3 Inspect - - - - - -
9.8.6.4 Repair - - - - - -
9.8.6.5 Assemble - - - - - -
* 9.8.6.6 Install 2b - - - - -
* 9.8.6.7 Extend / Retract 2b - - - - -
9.8.7 Trapeze Actuator
* 9.8.7.1 Remove 2b - - - - -
* 9.8.7.2 Install 2b - - - - -
9.8.7.3 Inspect - - - - - -
9.8.8 Forward / Aft Trapeze Arm
* 9.8.8.1 Remove 2b - - - - -
* 9.8.8.2 Install 2b - - - - -
9.8.8.3 Inspect - - - - - -
9.8.9 LAU-142 (AVEL) Launcher
* 9.8.9.1 Remove 2b - - - - -
9.8.9.2 Inspect - - - - - -
* 9.8.9.3 Install 2b - - - - -
* 9.8.9.4 Extend / Retract 2b - - - - -
* 9.8.9.5 Service Accumulator 2b - - - - -
9.8.10 BRU-46 Bomb Rack
* 9.8.10.1 Remove 2b - - - - -
* 9.8.10.2 Disassemble B 2b - - - - -
* 9.8.10.3 Inspect B 2b - - - - -
9.8.10.4 Repair - - - - - -
* 9.8.10.5 Assemble B 2b - - - - -
* 9.8.10.6 Install 2b - - - - -
* 9.8.10.7 Perform Proofload Test 2b - - - - -
* 9.8.10.8 Perform Bench Check using
TTU-584/E or A/E24T-197
Test Set
2b - - - - -
9.8.11 BRU-47 Bomb Rack
9.8.11.1 Remove - - - - - -
9.8.11.2 Disassemble - - - - - -
9.8.11.3 Inspect - - - - - -
F-22 Aircraft
105 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9.8.11.4 Repair - - - - - -
9.8.11.5 Assemble - - - - - -
9.8.11.6 Install - - - - - -
9.8.11.7 Perform Proofload Test - - - - - -
9.8.11.8 Perform Bench Check using
TTU-584/E or A/E24T-197
Test Set
- - - - - -
9.8.12 BRU-61
9.8.12.1 Remove - - - - - -
9.8.12.2 Disassemble - - - - - -
9.8.12.3 Inspect - - - - - -
9.8.12.4 Repair - - - - - -
9.8.12.5 Assemble - - - - - -
9.8.12.6 Install - - - - - -
9.8.12.7 Perform Bench Check using
AN/GYQ-79 Test Set
- - - - - -
9.9 Perform Basic Post-Flight
Inspections TR: IMIS
9.9.1 Pylon - - - - - -
9.9.2 LAU-141 - - - - - -
9.9.3 LAU-142 - - - - - -
9.9.4 BRU-46 - - - - - -
9.9.5 BRU-47 - - - - - -
9.9.6 BRU-61 - - - - - -
9.9.7 Gun System - - - - - -
9.10 Test Equipment TR: TOs 33D5-3-46-1, 33D5-3-50-
1,33D5-3-50-4, 33D5-12-231-1,33D5-
12-231-4, 33D5-16-72-1, 33D5-30-4-1, 33D5-53-13-1, 33D5-63-5-1, 33D5-
63-5-4, 33D9-54-7-42
9.10.1 Description - - - - - -
9.10.2 Familiarization
9.10.2.1 Detent Tester - - - - - -
* 9.10.2.2 Proofload Tester A - - - - -
* 9.10.2.3 TTU-584/E (COLT) A - - - - -
* 9.10.2.4 TTU-584/E (COLT)
Accessory Kit
A - - - - -
* 9.10.2.5 F-22 Test Programmable Set
(TPS)
A - - - - -
* 9.10.2.6 A/E24T-197 Test Set A - - - - -
9.10.2.7 AN/GYQ-79 (CMBRE) - - - - - -
9.10.3 Inspect
9.10.3.1 Detent Tester - - - - - -
* 9.10.3.2 Proofload Tester 1a - - - - -
* 9.10.3.3 TTU-584/E (COLT) 1a - - - - -
* 9.10.3.4 TTU-584/E (COLT)
Accessory Kit
1a - - - - -
* 9.10.3.5 F-22 Test Programmable Set
(TPS)
1a - - - - -
* 9.10.3.6 A/E24T-197 Test Set 1a - - - - -
F-22 Aircraft
106 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
9.10.3.7 AN/GYQ-79 (CMBRE) - - - - - -
9.10.4 Maintain - - - - - -
9.10.4.1 Detent Tester - - - - - -
9.10.4.2 Proofload Tester - - - - - -
9.10.4.3 TTU-584/E (COLT) - - - - - -
9.10.4.4 TTU-584/E (COLT)
Accessory Kit
- - - - - -
9.10.4.5 F-22 Test Programmable Set
(TPS)
- - - - - -
9.10.4.6 A/E24T-197 Test Set - - - - - -
9.10.4.7 AN/GYQ-79 (CMBRE) - - - - - -
9.10.5 Repair
9.10.5.1 Detent Tester - - - - - -
9.10.5.2 Proofload Tester - - - - - -
9.10.5.3 TTU-584/E (COLT) - - - - - -
9.10.5.4 TTU-584/E (COLT)
Accessory Kit
- - - - - -
9.10.5.5 F-22 Test Programmable Set
(TPS)
- - - - - -
9.10.5.6 A/E24T-197 Test Set - - - - - -
9.10.5.7 AN/GYQ-79 (CMBRE) - - - - - -
9.11 Fault Isolation Procedures TR: IMIS, TOs 11L1-2-24-2, 11B29-
3-60-2, 11B29-3-61-2
* 9.11.1 Principles of Troubleshooting A - - - - -
* 9.11.2 Use Fault Isolation Technical
Data
1a - - - - -
* 9.11.3 Use Schematic / Wiring
Diagrams
1a - - - - -
9.11.4 Troubleshoot Circuits - - - - - -
9.11.5 Retrieve Faults from Global
Manager
- - - - - -
9.12 Aircraft Functional Checks
with TTU-584/E TR: IMIS
9.12.1 Pylon 2b - - - - -
* 9.12.2 LAU-141 2b - - - - -
* 9.12.3 LAU-142 2b - - - - -
* 9.12.4 BRU-46 2b - - - - -
* 9.12.5 Gun System - - - - - -
9.13 Airmunitions (See Matrix) TR: TOs 1-1M-33, 144000
* 9.13.1 Characteristics A - - B - -
9.13.2 Nonnuclear
* 9.13.2.1 Load F 1b - - - - -
* 9.13.2.2 Unload F 1b - - - - -
F-22 Aircraft
107 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
F-35 Aircraft
108 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
10 F-35 AIRCRAFT
10.1 Aerospace Ground Equipment
10.1.1 Description - - - - - -
10.1.2 MJ-1 Aerial Stores Lift Truck TR: 35D3-2-25-1
10.1.2.1 Inspect - - - - - -
10.1.2.2 Operate - - - - - -
10.1.2.3 Drive - - - - - -
10.1.3 Munitions Handling Trailers TR: 11-1-38
10.1.3.1 Inspect - - - - - -
10.1.3.2 Load / Unload - - - - - -
10.1.3.3 Tie-Down Procedures - - - - - -
10.1.4 Utility Trailers TR: 36-A11-18-3-1, 36-A11-18-3-4
10.1.4.1 Inspect - - - - - -
10.1.4.2 Maintain - - - - - -
10.1.5 ADU-537A/E Missile
Munitions Loading Adapter TR: 35DA3-6-37-1
10.1.5.1 Inspect - - - - - -
10.1.5.2 Maintain - - - - - -
10.1.5.3 Operate - - - - - -
10.2 Aircraft Familiarization
10.2.1 Aircraft Switches, Controls,
and Indicators
- - - - - -
10.2.2 Aircraft Safety Devices - - - - - -
10.2.3 Aircraft Danger Areas - - - - - -
10.2.4 Perform Aircraft Safe for
Maintenance Procedures
F - - - - - -
10.2.5 Apply / Remove Aircraft
External Electrical Power
- - - - - -
10.2.6 Autonomic Logistics
Information System (ALIS)
10.2.6.1 Overview - - - - - -
10.2.6.2 Components - - - - - -
10.2.6.3 Operation - - - - - -
10.2.6.4 Portable Maintenance Aid
(PMA)
10.2.6.4.1 Overview - - - - - -
10.2.6.4.2 Connect / Disconnect - - - - - -
10.2.6.4.3 Operate - - - - - -
10.3 Gun System
10.3.1 Nomenclature - - - - - -
10.3.2 Function of Parts - - - - - -
10.3.3 Theory of Operation - - - - - -
10.3.4 Perform Safing and Clearing
Procedures
- - - - - -
10.3.5 Malfunctions / Jams - - - - - -
10.3.6 25mm Gun
10.3.6.1 Nomenclature - - - - - -
10.3.6.2 Function of Parts - - - - - -
F-35 Aircraft
109 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
10.3.6.3 Cycle of Operation - - - - - -
10.3.6.4 Remove - - - - - -
10.3.6.5 Disassemble - - - - - -
10.3.6.6 Inspect - - - - - -
10.3.6.7 Repair - - - - - -
10.3.6.8 Assemble - - - - - -
10.3.6.9 Install - - - - - -
10.3.6.10 Perform In-Shop Performance
Check
- - - - - -
10.3.7 Gun Control Unit
10.3.7.1 Remove - - - - - -
10.3.7.2 Inspect - - - - - -
10.3.7.3 Install - - - - - -
10.3.8 Gun Assembly
10.3.8.1 Remove - - - - - -
10.3.8.2 Inspect - - - - - -
10.3.8.3 Repair - - - - - -
10.3.8.4 Lubricate - - - - - -
10.3.8.5 Install - - - - - -
10.3.9 Muzzle Clamp
10.3.9.1 Remove - - - - - -
10.3.9.2 Inspect - - - - - -
10.3.9.3 Install - - - - - -
10.3.10 Clevis Bolts
10.3.10.1 Remove - - - - - -
10.3.10.2 Inspect - - - - - -
10.3.10.3 Install - - - - - -
10.3.11 Arming Solenoid
10.3.11.1 Remove - - - - - -
10.3.11.2 Inspect - - - - - -
10.3.11.3 Install - - - - - -
10.3.12 Breech Bolt Assembly
10.3.12.1 Remove - - - - - -
10.3.12.2 Inspect - - - - - -
10.3.12.3 Lubricate - - - - - -
10.3.12.4 Install - - - - - -
10.3.13 Safing / Firing Cam Assembly
10.3.13.1 Remove - - - - - -
10.3.13.2 Inspect - - - - - -
10.3.13.3 Lubricate - - - - - -
10.3.13.4 Install - - - - - -
10.3.14 Container Assembly
10.3.14.1 Remove - - - - - -
10.3.14.2 Inspect - - - - - -
10.3.14.3 Install - - - - - -
10.3.15 Container Drive Shaft
10.3.15.1 Remove - - - - - -
10.3.15.2 Inspect - - - - - -
10.3.15.3 Install - - - - - -
10.3.16 Gun Drive Shaft
10.3.16.1 Remove - - - - - -
F-35 Aircraft
110 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
10.3.16.2 Inspect - - - - - -
10.3.16.3 Install - - - - - -
10.3.17 Muzzle Sleeve
10.3.17.1 Remove - - - - - -
10.3.17.2 Inspect - - - - - -
10.3.17.3 Lubricate - - - - - -
10.3.17.4 Install - - - - - -
10.3.18 Transfer Unit
10.3.18.1 Remove - - - - - -
10.3.18.2 Inspect - - - - - -
10.3.18.3 Repair - - - - - -
10.3.18.4 Install - - - - - -
10.3.19 Safing Solenoid
10.3.19.1 Remove - - - - - -
10.3.19.2 Inspect - - - - - -
10.3.19.3 Install - - - - - -
10.3.20 Lock/Unlock CAM
10.3.20.1 Remove - - - - - -
10.3.20.2 Inspect - - - - - -
10.3.20.3 Install - - - - - -
10.3.21 Upload/Download Interface
10.3.21.1 Remove - - - - - -
10.3.21.2 Inspect - - - - - -
10.3.21.3 Install - - - - - -
10.3.22 Sensor, Auto Safe
10.3.22.1 Remove - - - - - -
10.3.22.2 Inspect - - - - - -
10.3.22.3 Install - - - - - -
10.3.23 Hydraulic Drive Motor/
Gearbox Assembly
10.3.23.1 Remove - - - - - -
10.3.23.2 Inspect - - - - - -
10.3.23.3 Install - - - - - -
10.3.24 Inspect Gun Motion Sensor #1 - - - - - -
10.3.25 Inspect Gun Motion Sensor #2 - - - - - -
10.3.26 Actuator, Gun Gas Purge Door
10.3.26.1 Remove - - - - - -
10.3.26.2 Install - - - - - -
10.3.27 Inspect Actuator Gun-Port
Door
- - - - - -
10.3.28 Ammunition Loading System
10.3.28.1 Nomenclature - - - - - -
10.3.28.2 Theory of Operation - - - - - -
10.3.28.3 25 mm Bulk Loader - - - - - -
10.4 Power Thermal Management
System (PTMS)
- - - - - -
10.5 Aircraft Actuated Doors
10.5.1 Left Hand / Right Hand
Weapons Bay Doors
10.5.1.1 Manual Open / Close - - - - - -
10.5.1.2 Hydraulic Open / Close - - - - - -
F-35 Aircraft
111 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
10.5.2 Countermeasure Doors
10.5.2.1 Open / Close Infrared
Countermeasures Doors
(IRCM)
- - - - - -
10.5.2.2 Open / Close RFCM Doors - - - - - -
10.6 Stores Management System
(SMS)
- - - - - -
10.7 Stores Suspension Equipment
10.7.1 Description - - - - - -
10.7.2 Theory of Operation - - - - - -
10.7.3 Function of Parts - - - - - -
10.7.4 Air-to-Ground Pylon
10.7.4.1 Remove - - - - - -
10.7.4.3 Inspect - - - - - -
10.7.4.6 Install - - - - - -
10.7.5 Air-to-Air Pylon
10.7.5.1 Remove - - - - - -
10.7.5.3 Inspect - - - - - -
10.7.5.6 Install - - - - - -
10.7.6 LAU-147
10.7.6.1 Remove - - - - - -
10.7.6.3 Inspect - - - - - -
10.7.6.6 Install - - - - - -
10.7.7 LAU-148 (Advanced Rail
Launcher)
10.7.7.1 Remove - - - - - -
10.7.7.3 Inspect - - - - - -
10.7.7.6 Install - - - - - -
10.7.8 Alternate Advanced Rail
Launcher
10.7.8.1 Remove - - - - - -
10.7.8.3 Inspect - - - - - -
10.7.8.6 Install - - - - - -
10.7.9 BRU-68
10.7.9.1 Remove - - - - - -
10.7.9.2 Inspect - - - - - -
10.7.9.3 Install - - - - - -
10.7.9.4 Reconfigure
10.7.9.4.1 High in the Bay (HIB) - - - - - -
10.7.9.4.2 Low in the Bay (LIB) - - - - - -
10.7.9.4.3 SDB-1 - - - - - -
10.7.9.4.4 B-61 - - - - - -
10.7.10 Ordnance Quick Latches
10.7.10.1 Remove - - - - - -
10.7.10.2 Inspect - - - - - -
10.7.10.3 Install - - - - - -
10.7.10.4 Operational Check - - - - - -
10.7.11 Fuselage Remote Interface
Unit (FRIU)
10.7.11.1 Remove - - - - - -
10.7.11.2 Install - - - - - -
F-35 Aircraft
112 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
10.7.12 Missile Remote Interface Unit
(MRIU)
10.7.12.1 Remove - - - - - -
10.7.12.2 Install - - - - - -
10.7.13 Pneumatic Power System
(PPS)
10.7.13.1 Weapons Bay PPS
10.7.13.1.1 Remove / Install Filter /
Manifold
- - - - - -
10.7.13.1.2 Remove / Install PAO Cooling
Plate
- - - - - -
10.7.13.1.3 Remove / Install Motor
Compressor
- - - - - -
10.7.13.2 Air-to-Ground Pylon PPS
10.7.13.2.1 Remove / Install ECU - - - - - -
10.7.13.2.2 Remove / Install Filter - - - - - -
10.7.13.2.3 Remove / Install Compressor - - - - - -
10.8 Test Equipment
10.8.1 Description - - - - - -
10.8.2 Familiarization
10.8.2.1 Stray Voltage Tester - - - - - -
10.8.2.2 Detent Tester - - - - - -
10.8.2.3 Wrap Around Connectors Test
Set
- - - - - -
10.8.3 Inspect
10.8.3.1 Stray Voltage Tester - - - - - -
10.8.3.2 Detent Tester - - - - - -
10.8.3.3 Wrap Around Connectors Test
Set
- - - - - -
10.8.4 Maintain
10.8.4.1 Stray Voltage Tester - - - - - -
10.8.4.2 Detent Tester - - - - - -
10.8.4.3 Wrap Around Connectors Test
Set
- - - - - -
10.9 Fault Isolation Procedures
10.9.1 Principles of Troubleshooting - - - - - -
10.9.2 Use Fault Isolation Technical
Data
- - - - - -
10.9.3 Use Schematic / Wiring
Diagrams
- - - - - -
10.9.4 Troubleshoot Circuits - - - - - -
10.10 Airmunitions (see Matrix)
10.10.1 Characteristics - - - - - -
10.10.2 Nonnuclear
10.10.2.1 Load F - - - - - -
10.10.2.2 Unload F - - - - - -
F-35 Aircraft
113 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
AC-130H Aircraft
114 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11 AC-130H AIRCRAFT
11.1 Aerospace Ground Equipment TR: TOs 11-1-38, 35C2-3-473-1,
35C2-3-372-1, 35C2-3-469-2, 35C2-3-
469-11, 35C2-3-469-12,
35C2-3-469-14, 35D3-2-25-1, 35D5-3-8-31, 35F5-5-16-1
* 11.1.1 Description A - - B - -
11.1.2 MHU-83 Munitions Handling /
Loading Lift Truck
* 11.1.2.1 Inspect 1b - - - - -
* 11.1.2.2 Operate 1b - - - - -
* 11.1.2.3 Drive 1b - - - - -
11.1.3 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
11.1.3.1 Inspect - - - - - -
11.1.3.2 Maintain - - - - - -
11.1.4 A/M32A-86 Generator Set
* 11.1.4.1 Inspect 2b - - - - -
* 11.1.4.2 Operate 2b - - - - -
11.1.5 TF-1 Floodlight Set
11.1.5.1 Inspect - - - - - -
11.1.5.2 Operate - - - - - -
11.1.6 FL-1D Floodlight Set
11.1.6.1 Inspect - - - - - -
11.1.6.2 Operate - - - - - -
11.2 General Aircraft
Familiarization TR: TOs 1C-130(A)H-2-1, 1C-
130(A)H-2-2, 11A-1-33
* 11.2.1 Aircraft Switches, Controls,
and Indicators
- - - - - -
* 11.2.2 Aircraft Safety Devices - - - - - -
* 11.2.3 Aircraft Danger Areas - - - - - -
11.2.4 Perform Aircraft Safe for
Maintenance Procedures
F - - - - - -
11.2.5 Apply / Remove Aircraft
External Electrical Power
- - - - - -
11.3 Gun System TR: TOs 1C-130(A)A-6, 1C-130(A)H-
2-1, 1C-130(A)H-2-2, 1C-130(A)H-2- 3, 1C-130(A)H-2-7, 1C-130(A)H-2-
13, 1C-130(A)H-2-14, , 1C-130(A)-
2-94JG-50-2-1, 11W1-15-15-2, 11W1-25-2, 11W1-33-1-112, 11W1-
33-1-122, 11W1-33-7-2, 11W1-33-8-
2, 11W2-5-2-62, 11W2-5-2-64, 1-1- 691, 1C-130(A)H-2- 94JG series
11.3.1 40mm Gun System
11.3.1.1 Nomenclature - - - - - -
11.3.1.2 Theory of Operation - - - - - -
11.3.1.3 Gun
* 11.3.1.3.1 Nomenclature A - - - - -
* 11.3.1.3.2 Theory of Operation A - - - - -
11.3.1.3.3 Perform Safing / Clearing F - - - - - -
AC-130H Aircraft
115 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11.3.1.3.4 Perform Pre-Flight Inspection - - - - - -
11.3.1.3.5 Perform Post-Flight Inspection - - - - - -
11.3.1.3.6 Remove B - - - - - -
11.3.1.3.7 Disassemble B - - - - - -
11.3.1.3.8 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.1.3.9 Assemble B - - - - - -
11.3.1.3.10 Install B - - - - - -
11.3.1.3.11 Perform Functional Check - - - - - -
11.3.1.3.12 Barrel Erosion Inspection - - - - - -
11.3.1.3.13 Barrel
* 11.3.1.3.13.1 Remove 1b - - - - -
* 11.3.1.3.13.2 Install 1b - - - - -
11.3.1.3.14 Breech Ring
* 11.3.1.3.14.1 Remove 1b - - - - -
* 11.3.1.3.14.2 Install 1b - - - - -
11.3.1.3.15 Shroud
11.3.1.3.15.1 Remove - - - - - -
11.3.1.3.15.2 Install - - - - - -
11.3.1.3.16 Loader
11.3.1.3.16.1 Nomenclature - - - - - -
11.3.1.3.16.2 Theory of Operation - - - - - -
* 11.3.1.3.16.3 Remove 1b - - - - -
11.3.1.3.16.4 Disassemble - - - - - -
11.3.1.3.16.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.1.3.16.6 Assemble - - - - - -
* 11.3.1.3.16.7 Install 1b - - - - -
11.3.1.3.17 Recoil Cylinder
11.3.1.3.17.1 Nomenclature - - - - - -
11.3.1.3.17.2 Theory of Operation - - - - - -
* 11.3.1.3.17.3 Remove 1b - - - - -
11.3.1.3.17.4 Disassemble - - - - - -
11.3.1.3.17.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.1.3.17.6 Assemble - - - - - -
* 11.3.1.3.17.7 Install 1b - - - - -
11.3.1.3.18 Firing Solenoid Assembly
11.3.1.3.18.1 Remove - - - - - -
11.3.1.3.18.2 Install - - - - - -
11.3.1.4 Trainable Gun Mount
11.3.1.4.1 Nomenclature - - - - - -
11.3.1.4.2 Theory of Operation - - - - - -
11.3.1.4.3 Remove F - - - - - -
11.3.1.4.4 Disassemble - - - - - -
11.3.1.4.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.1.4.6 Assemble - - - - - -
11.3.1.4.7 Install F - - - - - -
11.3.1.4.8 Perform Functional Check - - - - - -
11.3.1.4.9 Perform Boresight - - - - - -
AC-130H Aircraft
116 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11.3.1.4.10 Elevation Synchronizer
11.3.1.4.10.1 Remove - - - - - -
11.3.1.4.10.2 Install - - - - - -
11.3.1.4.11 Elevation Resolver
11.3.1.4.11.1 Remove - - - - - -
11.3.1.4.11.2 Install - - - - - -
11.3.1.4.12 Azimuth Synchronizer
11.3.1.4.12.1 Remove - - - - - -
11.3.1.4.12.2 Install - - - - - -
11.3.1.4.13 Azimuth Resolver
11.3.1.4.13.1 Remove - - - - - -
11.3.1.4.13.2 Install - - - - - -
11.3.1.5 Pallet Assembly
11.3.1.5.1 Remove - - - - - -
11.3.1.5.2 Install - - - - - -
11.3.1.6 Hydraulic Manifold Assembly
11.3.1.6.1 Nomenclature - - - - - -
11.3.1.6.2 Theory of Operation - - - - - -
11.3.1.6.3 Remove - - - - - -
11.3.1.6.4 Disassemble - - - - - -
11.3.1.6.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.1.6.6 Assemble - - - - - -
11.3.1.6.7 Install - - - - - -
11.3.1.7 Shutoff Valve Assembly
11.3.1.7.1 Remove - - - - - -
11.3.1.7.2 Install - - - - - -
11.3.1.8 Elevation Actuator
11.3.1.8.1 Remove - - - - - -
11.3.1.8.2 Install - - - - - -
11.3.1.9 Azimuth Actuator
11.3.1.9.1 Remove - - - - - -
11.3.1.9.2 Install - - - - - -
11.3.1.10 Aft Ammunition Rack
11.3.1.10.1 Nomenclature - - - - - -
11.3.1.10.2 Theory of Operation - - - - - -
11.3.1.10.3 Remove - - - - - -
11.3.1.10.4 Disassemble - - - - - -
11.3.1.10.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.1.10.6 Assemble - - - - - -
11.3.1.10.7 Install - - - - - -
11.3.1.11 Interface Plate
11.3.1.11.1 Remove - - - - - -
11.3.1.11.2 Install - - - - - -
11.3.2 105mm Gun System
11.3.2.1 Theory of Operation - - - - - -
11.3.2.2 Gun
* 11.3.2.2.1 Nomenclature A - - - - -
* 11.3.2.2.2 Theory of Operation A - - - - -
11.3.2.2.3 Perform Safing / Clearing F - - - - - -
AC-130H Aircraft
117 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11.3.2.2.3a Clear Malfunctions/Jams - - - - - -
11.3.2.2.4 Perform Pre-Flight Inspection - - - - - -
11.3.2.2.5 Perform Post-Flight Inspection - - - - - -
11.3.2.2.6 Remove B - - - - - -
11.3.2.2.7 Disassemble B - - - - - -
11.3.2.2.8 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.2.2.9 Assemble B - - - - - -
11.3.2.2.10 Install B - - - - - -
11.3.2.2.11 Perform Bore/Video Scope
Inspection
- - - - - -
11.3.2.2.12 Perform Gun Functional
Check
- - - - - -
11.3.2.3 Hand Pump Assembly
11.3.2.3.1 Nomenclature - - - - - -
11.3.2.3.2 Theory of Operation - - - - - -
11.3.2.3.3 Remove - - - - - -
11.3.2.3.4 Disassemble - - - - - -
11.3.2.3.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.2.3.6 Assemble - - - - - -
11.3.2.3.7 Install - - - - - -
11.3.2.4 Recoil Mechanism Assembly
11.3.2.4.1 Remove - - - - - -
11.3.2.4.2 Install - - - - - -
11.3.2.4.3 Barrel Assembly
11.3.2.4.3.1 Remove - - - - - -
11.3.2.4.3.2 Install - - - - - -
11.3.2.4.4 Breech Ring
11.3.2.4.4.1 Remove - - - - - -
11.3.2.4.4.2 Install - - - - - -
11.3.2.4.5 Service Nitrogen - - - - - -
11.3.2.4.6 Service Hydraulics - - - - - -
11.3.2.5 Azimuth Servoactuator
11.3.2.5.1 Remove - - - - - -
11.3.2.5.2 Install - - - - - -
11.3.2.6 Elevation Actuator
11.3.2.6.1 Remove - - - - - -
11.3.2.6.2 Install - - - - - -
11.3.2.7 Firing Solenoid
11.3.2.7.1 Remove - - - - - -
11.3.2.7.2 Install - - - - - -
11.3.2.8 Out-of-Battery Pump
11.3.2.8.1 Remove - - - - - -
11.3.2.8.2 Install - - - - - -
11.3.2.9 Tube Retractor
11.3.2.9.1 Remove - - - - - -
11.3.2.9.2 Install - - - - - -
11.3.2.10 Trainable Gun Mount
11.3.2.10.1 Nomenclature - - - - - -
11.3.2.10.2 Theory of Operation - - - - - -
AC-130H Aircraft
118 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11.3.2.10.3 Remove F - - - - - -
11.3.2.10.4 Disassemble - - - - - -
11.3.2.10.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.2.10.6 Assemble - - - - - -
11.3.2.10.7 Install F - - - - - -
11.3.2.10.8 Perform Trainable Gun Mount
Functional Check
- - - - - -
11.3.2.10.9 Perform Boresight - - - - - -
11.3.2.11 Adapter Pallet (Skid Plate)
11.3.2.11.1 Remove - - - - - -
11.3.2.11.2 Install - - - - - -
11.3.2.12 Elevation Resolver
11.3.2.12.1 Remove - - - - - -
11.3.2.12.2 Install - - - - - -
11.3.2.13 Elevation Synchronizer
11.3.2.13.1 Remove - - - - - -
11.3.2.13.2 Install - - - - - -
11.3.2.14 Azimuth Resolver
11.3.2.14.1 Remove - - - - - -
11.3.2.14.2 Install - - - - - -
11.3.2.15 Azimuth Synchronizer
11.3.2.15.1 Remove - - - - - -
11.3.2.15.2 Install - - - - - -
11.3.2.16 Hydraulic Manifold Assembly
11.3.2.16.1 Remove - - - - - -
11.3.2.16.2 Inspect - - - - - -
11.3.2.16.3 Repair - - - - - -
11.3.2.16.4 Install - - - - - -
11.3.2.17 Shutoff Valve Assembly
11.3.2.17.1 Remove - - - - - -
11.3.2.17.2 Install - - - - - -
11.3.2.18 Directional Control Valve
Assembly
11.3.2.18.1 Remove - - - - - -
11.3.2.18.2 Install - - - - - -
11.3.2.19 Ammunition Rack
11.3.2.19.1 Nomenclature - - - - - -
11.3.2.19.2 Theory of Operation - - - - - -
11.3.2.19.3 Remove - - - - - -
11.3.2.19.4 Disassemble - - - - - -
11.3.2.19.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
11.3.2.19.6 Assemble - - - - - -
11.3.2.19.7 Install - - - - - -
11.4 Armament System
Components
11.4.1 Starrett Gauges
11.4.1.1 Remove - - - - - -
11.4.1.2 Inspect - - - - - -
11.4.1.3 Install - - - - - -
AC-130H Aircraft
119 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11.4.1.4 Adjust - - - - - -
11.4.2 Loaders Weapons Control
Panel
11.4.2.1 Remove - - - - - -
11.4.2.2 Install - - - - - -
11.4.3 Gun Control Unit
11.4.3.1 Remove - - - - - -
11.4.3.2 Install - - - - - -
11.4.4 Fire Control Override Switch
11.4.4.1 Remove - - - - - -
11.4.4.2 Install - - - - - -
11.4.5 Master Arm switch
11.4.5.1 Remove - - - - - -
11.4.5.2 Install - - - - - -
11.4.6 Pilot’s Fire Control Switch
11.4.6.1 Remove - - - - - -
11.4.6.2 Install - - - - - -
11.5 Test Equipment TR: TOs 11W1-15-13-2-1, , 33-1-19,
36-1-58, 33A1-12-1198-1, 33A1-12-
1300-1
11.5.1 Description - - - - - -
11.5.2 Familiarization
11.5.2.1 Stray Voltage Tester - - - - - -
11.5.2.2 Nitrogen Servicing Gauge - - - - - -
11.5.2.4 Optical Borescope - - - - - -
11.5.2.6 TS-4485/ALM 288 Tester - - - - - -
11.5.3 Inspect
11.5.3.1 Stray Voltage Tester - - - - - -
11.5.3.2 Nitrogen Servicing Gauge - - - - - -
11.5.3.4 Optical Borescope - - - - - -
11.5.3.6 TS-4485/ALM 288 Tester - - - - - -
11.5.4 Operate
11.5.4.1 Stray Voltage Tester - - - - - -
11.5.4.2 Nitrogen Servicing Gauge - - - - - -
11.5.4.4 Optical Borescope - - - - - -
11.5.4.6 TS-4485/ALM 288 Tester - - - - - -
11.6 Fault Isolation Procedures TR: 1C-130(A)H-2-94FI series,
1-1A-14
11.6.1 Principles of Troubleshooting - - - - - -
11.6.2 Use Fault Isolation Technical
Orders
- - - - - -
11.6.3 Use Schematics / Wiring
Diagrams
- - - - - -
11.6.4 Troubleshoot Circuits - - - - - -
11.7 Special Tools TR: 35D-2-2, 1-1A-15, 11W1-15-13-
2-1, 32-1-101, 36C-5-15-1
11.7.1 Inspect
11.7.1.1 Transfer Rail System - - - - - -
11.7.1.2 Fork Adapter / Tines - - - - - -
11.7.1.3 Crane Adapter - - - - - -
AC-130H Aircraft
120 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1) Crse (2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11.7.1.4 Maintenance Stands - - - - - -
11.7.1.5 Crane Boom Extension
Assembly
- - - - - -
11.7.2 Operate
11.7.2.1 Transfer Rail System - - - - - -
11.7.2.2 Fork Adapter / Tines - - - - - -
11.7.2.3 Crane Adapter - - - - - -
11.7.2.4 Maintenance Stands - - - - - -
11.7.2.5 Crane Boom Extension
Assembly
- - - - - -
11.8 Perform Phase Inspection - - - - - -
11.9 Inspect / Operate 7.5 Ton
Overhead Rail Crane
- - - - - -
11.10 Inspect / Use Cleaning Vat - - - - - -
11.11 Airmunitions (See Matrix) TR:TOs 1-1M-33, 1C-130E-33-1-2
* 11.11.1 Characteristics A - - B - -
11.11.2 Chaff / Flare
11.11.2.1 Inspect - - - - - -
11.11.2.2 Load - - - - - -
11.11.2.3 Unload - - - - - -
11.11.3 Perform Hot Gun Response
Procedures
- - - - - -
121 1 January 2012
THIS PAGE INTENTIONALLY LEFT BLANK
AC-130U Aircraft
122 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12 AC-130U AIRCRAFT
12.1 Aerospace Ground Equipment TR: TOs 11-1-38, 35C2-3-473-1,
35C2-3-372-1, 35C2-3-469-2, 35C2-
3-469-11, 35C2-3-469-12, 35C2-3-
469-14, 35D3-2-25-1, 35D5-3-8-31, 35F5-11-31, 35F5-5-16-1, 35F5-11-22
* 12.1.1 Description A - - B - -
12.1.2 MJ-1 Aerial Stores Lift Truck
* 12.1.2.1 Inspect 3b - - - - -
* 12.1.2.2 Operate 3b - - - - -
* 12.1.2.3 Drive 3b - - - - -
12.1.3 MHU-83 Munitions Handling
/ Loading Lift Truck
* 12.1.3.1 Inspect 1b - - - - -
* 12.1.3.2 Operate 1b - - - - -
* 12.1.3.3 Drive 1b - - - - -
12.1.4 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
12.1.4.1 Inspect - - - - - -
12.1.4.2 Maintain - - - - - -
12.1.5 A/M32A-86 Generator Set
* 12.1.5.1 Inspect 2b - - - - -
* 12.1.5.2 Operate 2b - - - - -
12.1.6 TF-1 Floodlight Set
12.1.6.1 Inspect - - - - - -
12.1.6.2 Operate - - - - - -
12.1.7 FL-1D Floodlight Set
12.1.7.1 Inspect - - - - - -
12.1.7.2 Operate - - - - - -
12.2 General Aircraft
Familiarization TR: TOs 1C-130(A)U-1-3, 1C-
130(A)U-2-1, 1C-130(A)U-2-2, 1C- 130(A)H-2- 94JG series, 1C-
130(A)U-4-2
* 12.2.1 Aircraft Switches, Controls,
and Indicators
- - - - - -
* 12.2.2 Aircraft Safety Devices - - - - - -
* 12.2.3 Aircraft Danger Areas - - - - - -
12.2.4 Perform Aircraft Safe for
Maintenance Procedures
F - - - - - -
12.2.5 Apply / Remove Aircraft
External Electrical Power
- - - - - -
12.3 Gun System TR: TOs 1C-130(A)U-2-3, 1C- 130(A)U-2-6, 1C-130(A)U-2-7, 1C-
130(A)U-2-10-, 1C-130(A)U-2-13,
1C-130(A)H-2- 94JG series , 1C- 130(A)U-94FI-50-1, 1C-130(A)U-
94GS-50-1, 1C-130(A)U-94SD-50-1, 1C-130(A)U-94WD-50-1, 8C3-14-
35-2, 11A1-33, 11W1-12-12-2,
11W1-12-13-2, 11W1-15-13-2-1, 11W1-15-13-2-1, 11W1-15-13-4,
11W1-15-14-2, 11W1-15-14-4,
11W1-15-15-2, 11W1-15-15-3,
AC-130U Aircraft
123 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
11W1-15-15-4, 11W1-15-16-2, 11W1-15-16-3, 11W1-15-16-4,
11W1-25-1, 11W1-33-6-2, 11W2-5-
2-62, 11W2-5-2-64, 33D5-53-13-1, 35D-30-4-17-1, 35D30-4-19-1, 36C3-
5-15-1, TM9-4933-200-35, LCL
12.3.1 25mm Gun System
12.3.1.1 Theory of Operation - - - - - -
12.3.1.2 Gun
* 12.3.1.2.1 Nomenclature A - - - - -
* 12.3.1.2.2 Theory of Operation A - - - - -
12.3.1.2.3 Perform Safing / Clearing - - - - - -
12.3.1.2.4 Clear Malfunctions/Jams - - - - - -
12.3.1.2.5 Perform Pre-Flight Inspection - - - - - -
12.3.1.2.6 Perform Post-Flight Inspection - - - - - -
12.3.1.2.7 Remove - - - - - -
12.3.1.2.8 Disassemble - - - - - -
12.3.1.2.9 Clean / Inspect / Repair
/Lubricate
- - - - - -
12.3.1.2.10 Assemble - - - - - -
12.3.1.2.11 Install - - - - - -
12.3.1.2.12 Firing Solenoid
12.3.1.2.12.1 Remove - - - - - -
12.3.1.2.12.2 Install - - - - - -
12.3.1.2.13 Perform Barrel Erosion
Inspection
- - - - - -
12.3.1.2.14 Performance Check In-Shop - - - - - -
12.3.1.3 Ammunition Storage and
Handling System
12.3.1.3.1 Nomenclature - - - - - -
12.3.1.3.2 Theory of Operation - - - - - -
12.3.1.3.3 Conveyor Assembly
12.3.1.3.3.1 Nomenclature - - - - - -
12.3.1.3.3.2 Theory of Operation - - - - - -
12.3.1.3.3.3 Remove - - - - - -
12.3.1.3.3.4 Disassemble - - - - - -
12.3.1.3.3.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.3.3.6 Assemble - - - - - -
12.3.1.3.3.7 Install - - - - - -
12.3.1.3.3.8 Performance Check In-Shop - - - - - -
12.3.1.3.4 Magazine
12.3.1.3.4.1 Nomenclature - - - - - -
12.3.1.3.4.2 Theory of Operation - - - - - -
12.3.1.3.4.3 Remove - - - - - -
12.3.1.3.4.4 Disassemble - - - - - -
12.3.1.3.4.5 Clean / Inspect / Repair
Lubricate
- - - - - -
12.3.1.3.4.6 Assemble - - - - - -
12.3.1.3.4.7 Install - - - - - -
12.3.1.3.4.8 Performance Check In-Shop - - - - - -
12.3.1.3.5 Magazine Transfer Unit
(MTU)
AC-130U Aircraft
124 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.1.3.5.1 Nomenclature - - - - - -
12.3.1.3.5.2 Theory of Operation - - - - - -
12.3.1.3.5.3 Remove - - - - - -
12.3.1.3.5.4 Disassemble - - - - - -
12.3.1.3.5.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.3.5.6 Assemble - - - - - -
12.3.1.3.5.7 Install - - - - - -
12.3.1.3.5.8 Performance Check In-Shop - - - - - -
12.3.1.3.6 Ammunition Loader /
Downloader
12.3.1.3.6.1 Nomenclature - - - - - -
12.3.1.3.6.2 Theory of Operation - - - - - -
12.3.1.3.6.3 Remove - - - - - -
12.3.1.3.6.4 Disassemble - - - - - -
12.3.1.3.6.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.3.6.6 Assemble - - - - - -
12.3.1.3.6.7 Install - - - - - -
12.3.1.3.6.8 Performance Check In-Shop - - - - - -
12.3.1.3.7 Equilibrator
12.3.1.3.7.1 Nomenclature - - - - - -
12.3.1.3.7.2 Theory of Operation - - - - - -
12.3.1.3.7.3 Remove - - - - - -
12.3.1.3.7.4 Disassemble - - - - - -
12.3.1.3.7.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.3.7.6 Assemble - - - - - -
12.3.1.3.7.7 Install - - - - - -
12.3.1.3.7.8 Performance Check In-Shop - - - - - -
12.3.1.3.8 Flexible Drive Shaft
12.3.1.3.8.1 Remove - - - - - -
12.3.1.3.8.2 Install - - - - - -
12.3.1.3.9 Gun Drive Gear Box
12.3.1.3.9.1 Nomenclature - - - - - -
12.3.1.3.9.2 Theory of Operation - - - - - -
12.3.1.3.9.3 Remove - - - - - -
12.3.1.3.9.4 Disassemble - - - - - -
12.3.1.3.9.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.3.9.6 Assemble - - - - - -
12.3.1.3.9.7 Install - - - - - -
12.3.1.3.9.8 Performance Check In-Shop - - - - - -
12.3.1.4 Gun Transfer Unit (GTU)
12.3.1.4.1 Nomenclature - - - - - -
12.3.1.4.2 Theory of Operation - - - - - -
12.3.1.4.3 Remove - - - - - -
12.3.1.4.4 Disassemble - - - - - -
12.3.1.4.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.4.6 Assemble - - - - - -
AC-130U Aircraft
125 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.1.4.7 Install - - - - - -
12.3.1.4.8 Performance Check In-Shop - - - - - -
12.3.1.5 Magazine Hydraulic Drive
Unit
12.3.1.5.1 Nomenclature - - - - - -
12.3.1.5.2 Theory of Operation - - - - - -
12.3.1.5.3 Remove - - - - - -
12.3.1.5.4 Disassemble - - - - - -
12.3.1.5.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.5.6 Assemble - - - - - -
12.3.1.5.7 Install - - - - - -
12.3.1.5.8 Performance Check In-Shop - - - - - -
12.3.1.6 Trainable Gun Mount
12.3.1.6.1 Nomenclature - - - - - -
12.3.1.6.2 Theory of Operation - - - - - -
12.3.1.6.3 Remove - - - - - -
12.3.1.6.4 Disassemble - - - - - -
12.3.1.6.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.6.6 Perform Boresight - - - - - -
12.3.1.6.7 Assemble - - - - - -
12.3.1.6.8 Install - - - - - -
12.3.1.6.9 Performance Check In-Shop - - - - - -
12.3.1.7 Manual Hydraulic Drive
Assembly
12.3.1.7.1 Nomenclature - - - - - -
12.3.1.7.2 Theory of Operation - - - - - -
12.3.1.7.3 Remove - - - - - -
12.3.1.7.4 Disassemble - - - - - -
12.3.1.7.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.7.6 Assemble - - - - - -
12.3.1.7.7 Install - - - - - -
12.3.1.7.8 Performance Check In-Shop - - - - - -
12.3.1.8 Interface Plate
12.3.1.8.1 Remove - - - - - -
12.3.1.8.2 Install - - - - - -
12.3.1.9 Azimuth Servoactuator
12.3.1.9.1 Remove - - - - - -
12.3.1.9.2 Install - - - - - -
12.3.1.10 Elevation Servoactuator
12.3.1.10.1 Remove - - - - - -
12.3.1.10.2 Install - - - - - -
12.3.1.11 Remove Gun System - - - - - -
12.3.1.12 Install Gun System - - - - - -
12.3.1.13 Perform Operation Readiness
Inspection
- - - - - -
12.3.1.14 Perform Ammunition Storage
and Handling System
Functional Check
- - - - - -
AC-130U Aircraft
126 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.1.15 Perform Trainable Gun Mount
Functional Check
- - - - - -
12.3.1.16 Perform Boresight - - - - - -
12.3.1.17 Perform Loading Operations
with Ammunition Loading
Assembly
- - - - - -
12.3.1.18 Perform Manual Loading
Operations
- - - - - -
12.3.1.19 Ammunition Loading System
12.3.1.19.1 Loader / Gun Interface
Assembly
12.3.1.19.1.1 Nomenclature - - - - - -
12.3.1.19.1.2 Theory of Operation - - - - - -
12.3.1.19.1.3 Remove - - - - - -
12.3.1.19.1.4 Disassemble - - - - - -
12.3.1.19.1.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.19.1.6 Assemble - - - - - -
12.3.1.19.1.7 Install - - - - - -
12.3.1.19.1.8 Performance Check In-Shop - - - - - -
12.3.1.19.2 Loader Cradle Assembly
12.3.1.19.2.1 Nomenclature - - - - - -
12.3.1.19.2.2 Theory of Operation - - - - - -
12.3.1.19.2.3 Remove - - - - - -
12.3.1.19.2.4 Disassemble - - - - - -
12.3.1.19.2.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.19.2.6 Assemble - - - - - -
12.3.1.19.2.7 Install - - - - - -
12.3.1.19.2.8 Performance Check In-Shop - - - - - -
12.3.1.19.3 Fixed Chute Assembly
12.3.1.19.3.1 Nomenclature - - - - - -
12.3.1.19.3.2 Theory of Operation - - - - - -
12.3.1.19.3.3 Remove - - - - - -
12.3.1.19.3.4 Disassemble - - - - - -
12.3.1.19.3.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.19.3.6 Assemble - - - - - -
12.3.1.19.3.7 Install - - - - - -
12.3.1.19.3.8 Performance Check In-Shop - - - - - -
12.3.1.19.4 Loader / Can Interface Unit
Assembly
12.3.1.19.4.1 Nomenclature - - - - - -
12.3.1.19.4.2 Theory of Operation - - - - - -
12.3.1.19.4.3 Remove - - - - - -
12.3.1.19.4.4 Disassemble - - - - - -
12.3.1.19.4.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.19.4.6 Assemble - - - - - -
12.3.1.19.4.7 Install - - - - - -
12.3.1.19.4.8 Performance Check In-Shop - - - - - -
AC-130U Aircraft
127 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.1.19.5 Equibulator Jack Assembly
12.3.1.19.5.1 Nomenclature - - - - - -
12.3.1.19.5.2 Theory of Operation - - - - - -
12.3.1.19.5.3 Remove - - - - - -
12.3.1.19.5.4 Disassemble - - - - - -
12.3.1.19.5.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.1.19.5.6 Assemble - - - - - -
12.3.1.19.5.7 Install - - - - - -
12.3.1.19.5.8 Performance Check In-Shop - - - - - -
12.3.1.19.6 25mm Dust Boot
12.3.1.19.6.1 Remove - - - - - -
12.3.1.19.6.2 Inspect - - - - - -
12.3.1.19.6.3 Install - - - - - -
12.3.2 40mm Gun System
12.3.2.1 Theory of Operation - - - - - -
12.3.2.2 Gun
* 12.3.2.2.1 Nomenclature A - - - - -
* 12.3.2.2.2 Theory of Operation A - - - - -
12.3.2.2.3 Perform Safing / Clearing F - - - - - -
12.3.2.2.3a Clear Malfunctions/Jams - - - - - -
12.3.2.2.4 Perform Pre-Flight Inspection - - - - - -
12.3.2.2.5 Perform Post-Flight Inspection - - - - - -
12.3.2.2.6 Remove B - - - - - -
12.3.2.2.7 Disassemble B - - - - - -
12.3.2.2.8 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.2.2.9 Assemble B - - - - - -
12.3.2.2.10 Install B - - - - - -
12.3.2.2.11 Perform Functional Check - - - - - -
12.3.2.2.12 Barrel Erosion Inspection - - - - - -
12.3.2.2.13 Barrel
* 12.3.2.2.13.1 Remove 1b - - - - -
* 12.3.2.2.13.2 Install 1b - - - - -
12.3.2.2.14 Breech Ring
* 12.3.2.2.14.1 Remove 1b - - - - -
* 12.3.2.2.14.2 Install 1b - - - - -
12.3.2.2.15 Shroud
12.3.2.2.15.1 Remove - - - - - -
12.3.2.2.15.2 Install - - - - - -
12.3.2.2.16 Loader
12.3.2.2.16.1 Nomenclature - - - - - -
12.3.2.2.16.2 Theory of Operation - - - - - -
* 12.3.2.2.16.3 Remove 1b - - - - -
12.3.2.2.16.4 Disassemble - - - - - -
12.3.2.2.16.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.2.2.16.6 Assemble - - - - - -
* 12.3.2.2.16.7 Install 1b - - - - -
12.3.2.2.17 Recoil Cylinder
12.3.2.2.17.1 Nomenclature - - - - - -
AC-130U Aircraft
128 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.2.2.17.2 Theory of Operation - - - - - -
* 12.3.2.2.17.3 Remove 1b - - - - -
12.3.2.2.17.4 Disassemble - - - - - -
12.3.2.2.17.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.2.2.17.6 Assemble - - - - - -
* 12.3.2.2.17.7 Install 1b - - - - -
12.3.2.3 Trainable Gun Mount
12.3.2.3.1 Nomenclature - - - - - -
12.3.2.3.2 Theory of Operation - - - - - -
12.3.2.3.3 Remove F - - - - - -
12.3.2.3.4 Disassemble - - - - - -
12.3.2.3.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.2.3.5a Perform Boresight - - - - - -
12.3.2.3.6 Assemble - - - - - -
12.3.2.3.7 Install F - - - - - -
12.3.2.3.8 Perform Functional Check - - - - - -
12.3.2.4 Hydraulic Manifold Assembly
12.3.2.4.1 Nomenclature - - - - - -
12.3.2.4.2 Theory of Operation - - - - - -
12.3.2.4.3 Remove - - - - - -
12.3.2.4.4 Disassemble - - - - - -
12.3.2.4.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.2.4.6 Assemble - - - - - -
12.3.2.4.7 Install - - - - - -
12.3.2.5 Manual Hydraulic Drive
Assembly
12.3.2.5.1 Nomenclature - - - - - -
12.3.2.5.2 Theory of Operation - - - - - -
12.3.2.5.3 Remove - - - - - -
12.3.2.5.4 Disassemble - - - - - -
12.3.2.5.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.2.5.6 Assemble - - - - - -
12.3.2.5.7 Install - - - - - -
12.3.2.6 Ammunition Storage and
Handling System
12.3.2.6.1 Remove - - - - - -
12.3.2.6.2 Inspect / Repair / Clean - - - - - -
12.3.2.6.3 Install - - - - - -
12.3.2.7 Interface Plate
12.3.2.7.1 Remove - - - - - -
12.3.2.7.2 Install - - - - - -
12.3.2.8 Perform Boresight Operations - - - - - -
12.3.2.9 Azimuth Servoactuator
12.3.2.9.1 Remove - - - - - -
12.3.2.9.2 Install - - - - - -
12.3.2.10 Elevation Servoactuator
12.3.2.10.1 Remove - - - - - -
AC-130U Aircraft
129 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.2.10.2 Install - - - - - -
12.3.2.11 Firing Solenoid
12.3.2.11.1 Remove - - - - - -
12.3.2.11.2 Install - - - - - -
12.3.2.12 Remove System - - - - - -
12.3.2.13 Install System - - - - - -
12.3.3 105mm Gun System
12.3.3.1 Theory of Operation - - - - - -
12.3.3.2 Gun
* 12.3.3.2.1 Nomenclature A - - - - -
* 12.3.3.2.2 Theory of Operation A - - - - -
12.3.3.2.3 Perform Safing / Clearing F - - - - - -
12.3.3.2.3a Clear Malfunctions/Jams - - - - - -
12.3.3.2.4 Perform Pre-Flight Inspection - - - - - -
12.3.3.2.5 Perform Post-Flight Inspection - - - - - -
12.3.3.2.6 Remove B - - - - - -
12.3.3.2.7 Disassemble B - - - - - -
12.3.3.2.8 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.3.2.9 Assemble B - - - - - -
12.3.3.2.10 Install B - - - - - -
12.3.3.2.11 Perform Borescope Inspection - - - - - -
12.3.3.2.12 Perform Gun Functional
Check
- - - - - -
12.3.3.3 Manual Hydraulic Drive
Assembly
12.3.3.3.1 Nomenclature - - - - - -
12.3.3.3.2 Theory of Operation - - - - - -
12.3.3.3.3 Remove - - - - - -
12.3.3.3.4 Disassemble - - - - - -
12.3.3.3.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.3.3.6 Assemble - - - - - -
12.3.3.3.7 Install - - - - - -
12.3.3.4 Recoil Mechanism Assembly
12.3.3.4.1 Service Hydraulics - - - - - -
12.3.3.4.2 Service Nitrogen - - - - - -
12.3.3.5 Azimuth Servoactuator
12.3.3.5.1 Remove - - - - - -
12.3.3.5.2 Install - - - - - -
12.3.3.6 Elevation Servoactuator
12.3.3.6.1 Remove - - - - - -
12.3.3.6.2 Install - - - - - -
12.3.3.7 Elevation Actuator
12.3.3.7.1 Remove - - - - - -
12.3.3.7.2 Install - - - - - -
12.3.3.8 Firing Solenoid
12.3.3.8.1 Remove - - - - - -
12.3.3.8.2 Install - - - - - -
12.3.3.9 Out-of-Battery Pump
12.3.3.9.1 Remove - - - - - -
AC-130U Aircraft
130 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.3.3.9.2 Install - - - - - -
12.3.3.10 Tube Retractor
12.3.3.10.1 Remove - - - - - -
12.3.3.10.2 Install - - - - - -
12.3.3.11 Trainable Gun Mount
12.3.3.11.1 Nomenclature - - - - - -
12.3.3.11.2 Theory of Operation - - - - - -
12.3.3.11.3 Remove F - - - - - -
12.3.3.11.4 Disassemble - - - - - -
12.3.3.11.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.3.11.5a Boresight - - - - - -
12.3.3.11.6 Assemble - - - - - -
12.3.3.11.7 Install F - - - - - -
12.3.3.12 Perform Trainable Gun Mount
Functional Check
- - - - - -
12.3.3.13 Elevation Resolver
12.3.3.13.1 Remove - - - - - -
12.3.3.13.2 Install - - - - - -
12.3.3.14 Safety Cage
12.3.3.14.1 Remove - - - - - -
12.3.3.14.2 Install - - - - - -
12.3.3.15 Elevation Synchronizer
12.3.3.15.1 Remove - - - - - -
12.3.3.15.2 Install - - - - - -
12.3.3.16 Hydraulic Manifold Assembly
12.3.3.16.1 Remove - - - - - -
12.3.3.16.2 Inspect - - - - - -
12.3.3.16.3 Repair - - - - - -
12.3.3.16.4 Install - - - - - -
12.3.3.17 Ammunition Storage and
Handling System (ASHS)
12.3.3.17.1 Nomenclature - - - - - -
12.3.3.17.2 Theory of Operation - - - - - -
12.3.3.17.3 Remove - - - - - -
12.3.3.17.4 Disassemble - - - - - -
12.3.3.17.5 Clean / Inspect / Repair /
Lubricate
- - - - - -
12.3.3.17.6 Assemble - - - - - -
12.3.3.17.7 Install - - - - - -
12.3.3.18 Perform Boresight Operations - - - - - -
12.4 Armament System
Components TR: TOs 1C-130(A)U-2-1, 11W1-15-
16-2, 11W1-15-16-3, 11W1-15-16-4-,
11W1-33-6-2
12.4.1 Manual Readout Assembly
12.4.1.1 Remove - - - - - -
12.4.1.2 Inspect - - - - - -
12.4.1.3 Install - - - - - -
12.4.1.4 Adjust - - - - - -
AC-130U Aircraft
131 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.4.2 Loaders Weapons Control
Panel
12.4.2.1 Remove - - - - - -
12.4.2.2 Install - - - - - -
12.4.3 Electronic Control Unit
12.4.3.1 Remove - - - - - -
12.4.3.2 Install - - - - - -
12.4.4 Fire Control Override Switch
12.4.4.1 Remove - - - - - -
12.4.4.2 Repair - - - - - -
12.4.4.3 Install - - - - - -
12.4.5 Master Arm Switch
12.4.5.1 Remove - - - - - -
12.4.5.2 Repair - - - - - -
12.4.5.3 Install - - - - - -
12.4.6 Pilot’s Fire Control Switch
12.4.6.1 Remove - - - - - -
12.4.6.2 Install - - - - - -
12.4.7 Hydraulic Power Panel
12.4.7.1 Remove - - - - - -
12.4.7.2 Repair - - - - - -
12.4.7.3 Install - - - - - -
12.4.8 Gun Relay Unit
12.4.8.1 Remove - - - - - -
12.4.8.2 Install - - - - - -
12.4.9 Weapons Station Caution
Light Panel
12.4.9.1 Remove - - - - - -
12.4.9.2 Repair - - - - - -
12.4.9.3 Install - - - - - -
12.4.10 Fire Control Panel
12.4.10.1 Remove - - - - - -
12.4.10.2 Install - - - - - -
12.4.11 Gyro
12.4.11.1 Remove - - - - - -
12.4.11.2 Install - - - - - -
12.4.12 Resolver
12.4.12.1 Remove - - - - - -
12.4.12.2 Install - - - - - -
12.5 Test Equipment TR: TOs 11W1-15-13-2-1, 11W1-15-
14-4, 36-1-58, 33-1-19, 33A1-12-1300-1, 33A1-12-1198-1, 33D5-53-1-
111
12.5.1 Description - - - - - -
12.5.2 Familiarization
12.5.2.1 Nitrogen Servicing Gauge - - - - - -
12.5.2.2 Sextant - - - - - -
12.5.2.3 Stray Voltage Tester - - - - - -
12.5.2.4 Breakout Box - - - - - -
12.5.2.5 TS-4485/ALM 288 Tester - - - - - -
AC-130U Aircraft
132 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.5.2.6 Advanced Boresight
Equipment (ABE)
- - - - - -
12.5.3 Inspect
12.5.3.1 Nitrogen Servicing Gauge - - - - - -
12.5.3.2 Sextant - - - - - -
12.5.3.3 Stray Voltage Tester - - - - - -
12.5.3.4 Breakout Box - - - - - -
12.5.3.5 TS-4485/ALM 288 Tester - - - - - -
12.5.2.6 Advanced Boresight
Equipment (ABE)
- - - - - -
12.5.4 Operate
12.5.4.1 Nitrogen Servicing Gauge - - - - - -
12.5.4.2 Sextant - - - - - -
12.5.4.3 Stray Voltage Tester - - - - - -
12.5.4.4 Breakout Box - - - - - -
12.5.4.5 TS-4485/ALM 288 Tester - - - - - -
12.5.2.6 Advanced Boresight
Equipment (ABE)
- - - - - -
12.6 Fault Isolation TR: TOs 1-1A-14, 1C-130(A)U-94FI-
50-1, 1C-130(A)U-94GS-50-1, 1C-
130(A)U-94SD-50-1, 1C-130(A)U-94WD-50-1
- - - - - -
12.6.1 Principles of Troubleshooting - - - - - -
12.6.2 Use Fault Isolation Technical
Orders
- - - - - -
12.6.3 Use Schematics / Wiring
Diagrams
- - - - - -
12.6.4 Troubleshoot Circuits - - - - - -
12.7 Special Tools TR: TOs 1-1A-15, 11W1-15-13-2-1,
11W1-15-14-4, 33D30-4-17-1, 32-1-101, 36C3-5-15-1, 35D-1-2
12.7.1 Inspect
12.7.1.1 Transfer Rail System - - - - - -
12.7.1.2 Fork Adapter / Tines - - - - - -
12.7.1.3 Crane Adapter - - - - - -
12.7.1.4 ASHS Lifting Fixture - - - - - -
12.7.1.5 ASHS Dolly Set - - - - - -
12.7.1.6 Arm Safe Tool - - - - - -
12.7.1.7 GFU-23/E 25 MM Loader - - - - - -
12.7.2 Operate
12.7.2.1 Transfer Rail System - - - - - -
12.7.2.2 Fork Adapter / Tines - - - - - -
12.7.2.3 Crane Adapter - - - - - -
12.7.2.4 ASHS Lifting Fixture - - - - - -
12.7.2.5 ASHS Dolly Set - - - - - -
12.7.2.6 Arm Safe Tool - - - - - -
12.7.2.7 GFU-23/E 25 MM Loader - - - - - -
12.7.3 Ground Pressurization
Maintenance Check
12.7.3.1 Gun Pressurization Closeout
Panel
AC-130U Aircraft
133 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level
5
Level 7 Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
12.7.3.1.1 Install - - - - - -
12.7.3.1.2 Remove - - - - - -
12.8 Perform Phase Inspection TR: TOs 1C-130(A)-6WC, OIs, LCLs
- - - - - -
12.9 Inspect / Operate 7.5 Ton
Overhead Rail Crane
- - - - - -
12.10 Inspect / Use Cleaning Vat - - - - - -
12.11 Airmunitions (See Matrix) TR: TOs 1-1M-33, 1C-130E-33-1-2,
11A1-33, 11A13-11-7, 11A13-13-7,
11A13-16-7, 11A16-39-7, 11A15-41-7, 11A16-45-7
* 12.11.1 Characteristics A - - B - -
12.11.2 Chaff / Flare
12.11.2.1 Inspect - - - - - -
12.11.2.2 Load - - - - - -
12.11.2.3 Unload - - - - - -
12.11.3 25mm Ammunition
12.11.3.1 Inspect - - - - - -
12.11.3.2 Load - - - - - -
12.11.3.3 Unload - - - - - -
12.11.3.4 Perform Hot Gun Response
Procedures
CV-22
134 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
13 CV-22
13.1 Aerospace Ground
Equipment
* 13.1.1 Description A - - B - -
13.1.2 A/M32A-86 Generator Set
* 13.1.2.1 Inspect 2b - - - - -
* 13.1.2.2 Operate 2b - - - - -
13.1.3 TF-1 Floodlight Set
13.1.3.1 Inspect - - - - - -
13.1.3.2 Operate - - - - - -
13.1.4 FL-1D Floodlight Set
13.1.4.1 Inspect - - - - - -
13.1.4.2 Operate - - - - - -
13.2 Aircraft Familiarization
13.2.1 Aircraft Switches, Controls,
and Indicators
- - - - - -
13.2.2 Aircraft Safety Devices - - - - - -
13.2.3 Aircraft Danger Areas - - - - - -
13.2.4 Perform Aircraft Safe for
Maintenance Procedures
F - - - - - -
13.2.5 Apply / Remove Aircraft
External Electrical Power
- - - - - -
13.3 Portable Electronic Data
Device (PEDD) Laptop
13.3.1 Overview - - - - - -
13.3.2 Operate - - - - - -
13.4 Gun Systems TR: TOs 11W1-13-3-132, 11W1-
13-5-2, 11W1-15-18-1, 11W2-6-5-
1, 11W2-6-5-2
* 13.4.1 Description A - - - - -
13.4.2 A/A49E-16 Ramp Gun
Mount Assembly
13.4.2.1 Nomenclature - - - - - -
13.4.2.2 Left/Right Outboard
Modified Ramp Floor Panel
Removal
- - - - - -
13.4.2.3 Removal - - - - - -
13.4.2.4 Disassemble - - - - - -
13.4.2.5 Clean/Inspect/Repair/
Lubricate
- - - - - -
13.4.2.6 Assemble - - - - - -
13.4.2.7 Install - - - - - -
13.4.2.8 Left/Right Outboard
Modified Ramp Floor Panel
Installation
- - - - - -
13.4.2.9 M240D Machine Gun
* 13.4.2.9.1 Nomenclature A - - - - -
* 13.4.2.9.2 Function of Parts A - - - - -
* 13.4.2.9.3 Cycle of Operation A - - - - -
* 13.4.2.9.4 Perform Safing and Clearing
Procedures
F 2b - - - - -
CV-22
135 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
13.4.2.9.5 Clear Malfunctions/Jams - - - - - -
13.4.2.9.6 Remove B - - - - - -
* 13.4.2.9.7 Disassemble B 2b - - - - -
13.4.2.9.8 Clean - - - - - -
13.4.2.9.9 Inspect B - - - - - -
13.4.2.9.10 Repair - - - - - -
13.4.2.9.11 Lubricate - - - - - -
* 13.4.2.9.12 Assemble B 2b - - - - -
* 13.4.2.9.13 Perform In-Shop
FunctionalCheck
1b - - - - -
13.4.2.9.14 Perform Gun
Malfunction/Jam Inspection
- - - - - -
13.4.2.9.15 Install B - - - - - -
13.4.2.9.16 Perform Field-of-Fire Check - - - - - -
13.4.2.10 GAU-18 (.50 Caliber)
Machine Gun
* 13.4.2.10.1 Nomenclature A - - - - -
* 13.4.2.10.2 Function of Parts A - - - - -
* 13.4.2.10.3 Cycle of Operation A - - - - -
* 13.4.2.10.4 Perform Safing and Clearing
Procedures
F 2b - - - - -
13.4.2.10.5 Clear Malfunctions/Jams - - - - - -
* 13.4.2.10.6 Disassemble B 2b - - - - -
* 13.4.2.10.7 Clean a - - - - -
* 13.4.2.10.8 Inspect B 1b - - - - -
13.4.2.10.9 Repair - - - - - -
13.4.2.10.10 Lubricate - - - - - -
* 13.4.2.10.11 Assemble B 2b - - - - -
* 13.4.2.10.12 Perform Manual
CheckoutIn-Shop
1b - - - - -
13.4.2.10.13 Perform Head Space /
Timing Check
- - - - - -
* 13.4.2.10.14 Adjust Head Spacing and
Timing
1b - - - - -
* 13.4.2.10.15 Perform Barrel Erosion
Check
1b - - - - -
13.4.2.10.15 Back Plate Assembly
* 13.4.2.10.15.1 Remove 2b - - - - -
13.4.2.10.15.2 Disassemble - - - - - -
13.4.2.10.15.3 Clean / Inspect / Repair - - - - - -
13.4.2.10.15.4 Assemble - - - - - -
* 13.4.2.10.15.5 Install 2b - - - - -
13.4.2.10.16 Flash Suppresser
13.4.2.10.16.1 Remove - - - - - -
13.4.2.10.16.2 Clean / Inspect / Lubricate - - - - - -
13.4.2.10.16.3 Install - - - - - -
13.4.2.10.17 Link Chute Assembly
13.4.2.10.17.1 Remove - - - - - -
13.4.2.10.17.2 Disassemble - - - - - -
13.4.2.10.17.3 Clean / Inspect / Repair - - - - - -
13.4.2.10.17.4 Assemble - - - - - -
CV-22
136 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
13.4.2.10.17.5 Install - - - - - -
13.4.2.10.17.6 Test - - - - - -
13.4.2.10.18 MK-94 Recoil Adapter
13.4.2.10.18.1 Removal of Gun from
Adapter
- - - - - -
13.4.2.10.18.2 Disassemble - - - - - -
13.4.2.10.18.3 Inspect / Service / Lubricate - - - - - -
13.4.2.10.18.4 Assemble - - - - - -
13.4.2.10.18.5 Installation of Gun to
Adapter
- - - - - -
13.4.2.10.19 Spent Brass Hopper
Assemblies
13.4.2.10.19.1 Remove - - - - - -
13.4.2.10.19.2 Clean / Inspect / Repair - - - - - -
13.4.2.10.19.3 Install - - - - - -
13.4.3 GAU-2 (7.62mm) Gatling
Gun
* 13.4.3.1 Nomenclature A - - - - -
* 13.4.3.2 Function of Parts A - - - - -
* 13.4.3.3 Cycle of Operation A - - - - -
* 13.4.3.4 Perform Safing and Clearing
Procedures
3b - - - - -
13.4.2.5 Clear Malfunctions/Jams - - - - - -
13.4.3.6 Remove - - - - - -
* 13.4.3.7 Disassemble 2b - - - - -
* 13.4.3.8 Clean a - - - - -
* 13.4.3.9 Inspect 1b - - - - -
13.4.3.10 Repair - - - - - -
13.4.3.11 Lubricate - - - - - -
* 13.4.3.12 Assemble 2b - - - - -
13.4.3.13 Perform In-Shop
FunctionalCheck
- - - - - -
* 13.4.3.14 Perform Manual Checkout
In-Shop
2b - - - - -
13.4.3.15 Perform Gun
Malfunction/Jam Inspection
- - - - - -
13.4.3.16 Install - - - - - -
13.4.3.17 Perform Field-of-Fire Check - - - - - -
13.4.3.18 Flash Suppresser
* 13.4.3.18.1 Remove 2b - - - - -
13.4.3.18.2 Clean / Inspect / Lubricate - - - - - -
* 13.4.3.18.3 Install 2b - - - - -
13.4.3.19 Gun Drive Assembly
* 13.4.3.19.1 Remove 2b - - - - -
13.4.3.19.2 Disassemble - - - - - -
13.4.3.19.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
13.4.3.19.4 Assemble - - - - - -
* 13.4.3.19.5 Install 2b - - - - -
13.4.3.20. Dillon Feeder
* 13.4.3.20.1 Remove 2b - - - - -
CV-22
137 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
13.4.3.20.2 Disassemble - - - - - -
13.4.3.20.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
13.4.3.20.4 Assemble - - - - - -
* 13.4.3.20.5 Install 2b - - - - -
13.4.3.20.6 Test - - - - - -
13.5 Test Equipment
13.5.1 An/ALM 288 Test Set
Familiarization
- - - - - -
13.5.2 An/ALM 288 Test Set
Inspect
- - - - - -
13.5.3 An/ALM 288 Test Set
Maintain
- - - - - -
13.6 Fault Isolation Procedures
13.6.1 Principles of
Troubleshooting
- - - - - -
13.6.2 Use Fault Isolation
Technical Orders
- - - - - -
13.6.3 Use Schematic / Wiring
Diagrams
- - - - - -
13.6.4 Troubleshoot Circuits - - - - - -
13.6.5 Identify Mechanical
Malfunctions
- - - - - -
13.7 Perform Basic Post-Flight
Inspection TR: TO 11W1-13-5-2, 11W2-6-5-1
13.7.1 M240D Gun System - - - - - -
13.7.2 GAU-18 Gun System - - - - - -
13.7.3 GAU-2 Gun System - - - - - -
13.8 Armory Procedures TR: AFI 31-101, DoD 5100.76,
5100.2-R, OIs, LCLs
13.8.1 Open / Close - - - - - -
13.8.2 Alarm Test - - - - - -
13.8.3 Duress System - - - - - -
13.8.4 Inventory Procedures - - - - - -
13.8.5 Weapons Loading / Clearing
Procedures
- - - - - -
13.9 Aircraft Weapons Security /
Deployed Weapons Security TR: AFI 31-101, DoD 5100.76,
DoD 4160-21, DoD 4160-21-M-1 ,
OIs, LCLs
13.9.1 Risk Categories - - - - - -
13.9.2 Protection - - - - - -
13.9.3 Weapons Movement - - - - - -
13.9.4 Storage Requirement - - - - - -
13.10 Airmunitions
13.10.1 Characteristics - - - B - -
13.10.2 Chaff / Flare TR: 12P3-2ALE-102
13.10.2.1 Inspect - - - - - -
13.10.2.2 Install - - - - - -
CV-22
138 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
13.10.2.3 Remove - - - - - -
13.10.2.4 Stray Voltage Check with
AN/ALM 288 Test Set
- - - - - -
CV-22
139 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
HH-60 Helicopter
140 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
14 HH-60 HELICOPTER - - - - - -
14.1 Aerospace Ground Equipment TR: TOs 34Y1-87-71, 35C2-3-469-1,
35C2-3-473-1, 35C2-3-469-2, 35F5-
5-11-31, 35F5-11-61, 35F5-5-16-1,
35F5-5-20-1, 35C1-4-146-1, 35C2-3-372-11
* 14.1.1 Description A - - B - -
14.1.2 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
14.1.2.1 Inspect - - - - - -
14.1.2.2 Maintain - - - - - -
14.1.3 FL-1D Floodlight Set
14.1.3.1 Inspect - - - - - -
14.1.3.2 Operate - - - - - -
14.1.4 MEP-360A (AGPU)
14.1.4.1 Inspect - - - - - -
14.1.4.2 Operate - - - - - -
14.1.5 A/M32A-86 Generator Set
* 14.1.5.1 Inspect 2b - - - - -
* 14.1.5.2 Operate 2b - - - - -
14.1.6 A/M32A-60 Generator Set
14.1.6.1 Inspect - - - - - -
14.1.6.2 Operate - - - - - -
14.1.7 EPU-6/E Frequency Converter
14.1.7.1 Inspect - - - - - -
14.1.7.2 Operate - - - - - -
14.1.8 B809A-72W Generator
14.1.8.1 Inspect - - - - - -
14.1.8.2 Operate - - - - - -
14.2 General Aircraft
Familiarization TR: TOs 1H-60(H)G-2-1, 1H-
60(H)G-2-1CL-3, 1H-60(H)G-33-1-2,
11A1-1-33
* 14.2.1 Aircraft Switches, Controls,
and Indicators
- - - - - -
* 14.2.2 Aircraft Safety Devices - - - - - -
* 14.2.3 Aircraft Danger Areas - - - - - -
* 14.2.4 Perform Aircraft Safe for
Maintenance Procedures
F - - - - - -
* 14.2.5 Apply / Remove Aircraft
External Electrical Power
F - - - - - -
14.3 Gun Systems TR: TOs 1H-60(H)G-2-1, 1H-
60(H)G-2-9, 1H-60(H)G-33-1-2CL-2, 1H-60(H)G-112, 11W1-1-10, 11W1-
13-3-132, 11A-1-33, 11W1-13-5-2,
11W1-33-9-2, 11W2-6-5-1, 11W2-6-5-2, OIs, LCLs
* 14.3.1 Description A - - - - -
14.3.2 Electronic Control Unit
* 14.3.2.1 Remove - - - - - -
14.3.2.2 Disassemble - - - - - -
14.3.2.3 Clean / Inspect / Repair - - - - - -
HH-60 Helicopter
141 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
14.3.2.4 Assemble - - - - - -
* 14.3.2.5 Install - - - - - -
14.3.2.6 Perform In-Shop Functional
Check
- - - - - -
14.3.3 Gun System Control Panel
14.3.3.1 Remove - - - - - -
14.3.3.2 Disassemble - - - - - -
14.3.3.3 Clean / Inspect / Repair - - - - - -
14.3.3.4 Assemble - - - - - -
14.3.3.5 Install - - - - - -
14.3.3.6 Perform In-Shop Functional
Check
- - - - - -
14.3.4 Pintle Arm Assembly
14.3.4.1 Remove - - - - - -
14.3.4.2 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.4.3 Install - - - - - -
14.3.5 GAU-2 (7.62mm) Gun System
* 14.3.5.1 Nomenclature A - - - - -
* 14.3.5.2 Function of Parts A - - - - -
* 14.3.5.3 Theory of Operation A - - - - -
* 14.3.5.4 Perform Functional Check on
Aircraft
F - - - - - -
14.3.5.5 Perform Field-of-Fire Check - - - - - -
14.3.5.6 Perform Mechanical /
Electrical Troubleshooting
- - - - - -
14.3.5.7 Clear Malfunctions / Jams - - - - - -
14.3.5.8 GAU-2 Gatling Gun
* 14.3.5.8.1 Cycle of Operation A - - - - -
* 14.3.5.8.2 Perform Safing and Clearing
Procedures
F 3b - - - - -
* 14.3.5.8.3 Remove B 2b - - - - -
14.3.5.8.4 Remove with Rotors Turning - - - - - -
* 14.3.5.8.5 Disassemble B 2b - - - - -
* 14.3.5.8.6 Clean a - - - - -
* 14.3.5.8.7 Inspect B 1b - - - - -
14.3.5.8.8 Repair - - - - - -
14.3.5.8.9 Lubricate - - - - - -
14.3.5.8.10 Modify - - - - - -
* 14.3.5.8.11 Assemble B 2b - - - - -
* 14.3.5.8.12 Install B 2b - - - - -
14.3.5.8.13 Install with Rotors Turning - - - - - -
* 14.3.5.8.14 Perform Manual Checkout In-
Shop
2b - - - - -
14.3.5.9 Clutch Assembly
14.3.5.9.1 Remove - - - - - -
14.3.5.9.2 Disassemble - - - - - -
14.3.5.9.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.5.9.4 Assemble - - - - - -
14.3.5.9.5 Install - - - - - -
14.3.5.10 Flash Suppresser
HH-60 Helicopter
142 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 14.3.5.10.1 Remove 2b - - - - -
14.3.5.10.2 Clean / Inspect / Repair /
Lubricate
- - - - - -
* 14.3.5.10.3 Install 2b - - - - -
14.3.5.11 Gun Drive Assembly
* 14.3.5.11.1 Remove 2b - - - - -
14.3.5.11.2 Disassemble - - - - - -
14.3.5.11.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.5.11.4 Assemble - - - - - -
* 14.3.5.11.5 Install 2b - - - - -
14.3.5.11.6 Test - - - - - -
14.3.5.12 Gun Control Unit
14.3.5.12.1 Remove - - - - - -
14.3.5.12.2 Disassemble - - - - - -
14.3.5.12.3 Clean / Inspect / Repair - - - - - -
14.3.5.12.4 Assemble - - - - - -
14.3.5.12.5 Install - - - - - -
14.3.5.12.6 Test - - - - - -
14.3.5.13 Hand Grip Housing
14.3.5.13.1 Remove - - - - - -
14.3.5.13.2 Clean / Inspect / Repair - - - - - -
14.3.5.13.3 Install - - - - - -
14.3.5.14 Yoke Assembly
14.3.5.14.1 Remove - - - - - -
14.3.5.14.2 Disassemble - - - - - -
14.3.5.14.3 Clean / Inspect / Repair/
Lubricate
- - - - - -
14.3.5.14.4 Assemble - - - - - -
14.3.5.14.5 Install - - - - - -
14.3.5.15 Dillon Feeder
* 14.3.5.15.1 Remove 2b - - - - -
14.3.5.15.2 Disassemble - - - - - -
14.3.5.15.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.5.15.4 Assemble - - - - - -
* 14.3.5.15.5 Install 2b - - - - -
14.3.5.15.6 Test - - - - - -
14.3.5.16 Gun Mount Assembly
14.3.5.16.1 Remove - - - - - -
14.3.5.16.2 Disassemble - - - - - -
14.3.5.16.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.5.16.4 Assemble - - - - - -
14.3.5.16.5 Install - - - - - -
14.3.5.17 7.62mm Ammunition
Magazine Assembly
14.3.5.17.1 Remove - - - - - -
14.3.5.17.2 Disassemble - - - - - -
14.3.5.17.3 Clean / Inspect / Repair - - - - - -
14.3.5.17.4 Assemble - - - - - -
14.3.5.17.5 Install - - - - - -
HH-60 Helicopter
143 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
14.3.5.18 7.62mm Booster Motor
Assembly
14.3.5.18.1 Remove - - - - - -
14.3.5.18.2 Disassemble - - - - - -
14.3.5.18.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.5.18.4 Modify - - - - - -
14.3.5.18.5 Assemble - - - - - -
14.3.5.18.6 Install - - - - - -
14.3.5.19 Ammunition Feed Chute
14.3.5.19.1 Remove - - - - - -
14.3.5.19.2 Disassemble - - - - - -
14.3.5.19.3 Clean / Inspect / Repair/
Lubricate
- - - - - -
14.3.5.19.4 Assemble - - - - - -
14.3.5.19.5 Install - - - - - -
14.3.5.19.6 Test - - - - - -
14.3.5.20 Brass Eject Chute Hose
14.3.5.20.1 Remove - - - - - -
14.3.5.20.2 Clean / Inspect / Repair - - - - - -
14.3.5.20.3 Install - - - - - -
14.3.5.21 Pintle Post Assembly
14.3.5.21.1 Remove - - - - - -
14.3.5.21.2 Disassemble - - - - - -
14.3.5.21.3 Clean / Inspect / Repair
Lubricate
- - - - - -
14.3.5.21.4 Assemble - - - - - -
14.3.5.21.5 Install - - - - - -
14.3.5.22 Wiring Harness
14.3.5.22.1 Remove - - - - - -
14.3.5.22.2 Clean / Inspect / Repair - - - - - -
14.3.5.22.3 Install - - - - - -
14.3.6 GAU-18 (.50 Caliber) Gun
System
* 14.3.6.1 Nomenclature A - - - - -
* 14.3.6.2 Function of Parts A - - - - -
* 14.3.6.3 Theory of Operation A - - - - -
* 14.3.6.4 Perform Functional Check on
Aircraft
F - - - - - -
14.3.6.5 Perform Field-of-Fire Check - - - - - -
14.3.6.6 Perform Mechanical /
Electrical Troubleshooting
- - - - - -
14.3.6.7 Clear Malfunctions / Jams - - - - - -
14.3.6.8 GAU-18 Machine Gun
* 14.3.6.8.1 Cycle of Operation A - - - - -
* 14.3.6.8.2 Perform Safing and Clearing
Procedures
2b - - - - -
* 14.3.6.8.3 Remove 2b - - - - -
14.3.6.8.4 Remove with Rotors Turning - - - - - -
* 14.3.6.8.5 Disassemble 2b - - - - -
* 14.3.6.8.6 Clean a - - - - -
* 14.3.6.8.7 Inspect 1b - - - - -
HH-60 Helicopter
144 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
14.3.6.8.8 Repair - - - - - -
14.3.6.8.9 Lubricate - - - - - -
14.3.6.8.10 Modify - - - - - -
* 14.3.6.8.11 Assemble 2b - - - - -
* 14.3.6.8.12 Install 2b - - - - -
14.3.6.8.13 Install with Rotors Turning - - - - - -
* 14.3.6.8.14 Perform Manual Checkout In-
Shop
1b - - - - -
* 14.3.6.8.15 Perform Head-Space / Timing
Check/ Adjustment
1b - - - - -
* 14.3.6.8.16 Perform Barrel Erosion Check 1b - - - - -
14.3.6.9 Back Plate Assembly
* 14.3.6.9.1 Remove 2b - - - - -
14.3.6.9.2 Disassemble - - - - - -
14.3.6.9.3 Clean / Inspect / Repair - - - - - -
14.3.6.9.4 Modify - - - - - -
14.3.6.9.5 Assemble - - - - - -
* 14.3.6.9.6 Install 2b - - - - -
14.3.6.10 Flash Suppressor
14.3.6.10.1 Remove - - - - - -
14.3.6.10.2 Clean / Inspect / Lubricate - - - - - -
14.3.6.10.3 Install - - - - - -
14.3.6.11 Link Ejection Chute Assembly
14.3.6.11.1 Remove - - - - - -
14.3.6.11.2 Disassemble - - - - - -
14.3.6.11.3 Clean / Inspect / Repair - - - - - -
14.3.6.11.4 Assemble - - - - - -
14.3.6.11.5 Install - - - - - -
14.3.6.11.6 Test - - - - - -
14.3.6.12 Feed Chute Adapter
14.3.6.12.1 Remove - - - - - -
14.3.6.12.2 Disassemble - - - - - -
14.3.6.12.3 Clean / Inspect / Repair - - - - - -
14.3.6.12.4 Assemble - - - - - -
14.3.6.12.5 Install - - - - - -
14.3.6.13 GAU-18 (Modified) Gun
Yoke / Cradle Assembly
14.3.6.13.1 Remove - - - - - -
14.3.6.13.2 Disassemble - - - - - -
14.3.6.13.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.6.13.4 Assemble - - - - - -
14.3.6.13.5 Install - - - - - -
14.3.6.14 Rigid Spent Brass Chute
14.3.6.14.1 Remove - - - - - -
14.3.6.14.2 Disassemble - - - - - -
14.3.6.14.3 Clean / Inspect / Repair - - - - - -
14.3.6.14.4 Assemble - - - - - -
14.3.6.14.5 Install - - - - - -
14.3.6.15 Brass Eject Chute Hose - - - - - -
14.3.6.15.1 Remove - - - - - -
14.3.6.15.2 Clean / Inspect / Repair - - - - - -
HH-60 Helicopter
145 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
14.3.6.15.3 Install - - - - - -
14.3.6.16 Grip Assembly
14.3.6.16.1 Remove - - - - - -
14.3.6.16.2 Disassemble - - - - - -
14.3.6.16.3 Clean / Inspect / Repair - - - - - -
14.3.6.16.4 Assemble - - - - - -
14.3.6.16.5 Install - - - - - -
14.3.6.17 Ammunition Feed Chute
14.3.6.17.1 Remove - - - - - -
14.3.6.17.2 Disassemble - - - - - -
14.3.6.17.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.6.17.4 Assemble - - - - - -
14.3.6.17.5 Install - - - - - -
14.3.6.17.6 Test - - - - - -
14.3.6.18 .50 Cal Ammunition
Magazine Assembly
14.3.6.18.1 Remove - - - - - -
14.3.6.18.2 Disassemble - - - - - -
14.3.6.18.3 Clean / Inspect / Repair - - - - - -
14.3.6.18.4 Assemble - - - - - -
14.3.6.18.5 Install - - - - - -
14.3.6.19 .50 Cal Booster
Housing/Motor Assembly
14.3.6.19.1 Remove - - - - - -
14.3.6.19.2 Disassemble - - - - - -
14.3.6.19.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.6.19.4 Assemble - - - - - -
14.3.6.19.5 Install - - - - - -
14.3.6.20 Pintle Post Assembly
14.3.6.20.1 Remove - - - - - -
14.3.6.20.2 Disassemble - - - - - -
14.3.6.20.3 Clean / Inspect / Repair
Lubricate
- - - - - -
14.3.6.20.4 Assemble - - - - - -
14.3.6.20.5 Install - - - - - -
14.3.6.21 Wiring Harness
14.3.6.21.1 Remove - - - - - -
14.3.6.21.2 Clean / Inspect / Repair - - - - - -
14.3.6.21.3 Install - - - - - -
14.3.7 M240D Machine Gun System
* 14.3.7.1 Nomenclature A - - - - -
* 14.3.7.2 Function of Parts A - - - -
* 14.3.7.3 Theory of Operation A - - - - -
* 14.3.7.4 Perform Field-of-Fire Check 2b - - - - -
* 14.3.7.5 Perform Mechanical
Troubleshooting
2b - - - - -
14.3.7.6 Clear Malfunctions / Jams - - - - - -
14.3.7.7 M240D Machine Gun
* 14.3.7.7.1 Function of Parts A - - - - -
* 14.3.7.7.2 Cycle of Operation A - - - - -
HH-60 Helicopter
146 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 14.3.7.7.3 Perform Safing and Clearing 2b - - - - -
* 14.3.7.7.4 Remove 2b - - - - -
* 14.3.7.7.5 Disassemble 2b - - - - -
14.3.7.7.6 Clean / Inspect / Repair /
Lubricate
- - - - - -
* 14.3.7.7.7 Assemble 2b - - - - -
* 14.3.7.7.8 Install 2b - - - - -
* 14.3.7.7.9 Perform In-Shop Functional
Check
1b - - - - -
14.3.7.7.10 Perform Loose Rivet Check - - - - - -
14.3.7.8 Ammunition Can Bracket,
Spent Brass Bag, and
Collector Assembly
14.3.7.8.1 Remove - - - - - -
14.3.7.8.2 Disassemble - - - - - -
14.3.7.8.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.7.8.4 Assemble - - - - - -
14.3.7.8.5 Install - - - - - -
14.3.7.9 Cradle Assembly
14.3.7.9.1 Remove from Mount Arm - - - - - -
14.3.7.9.2 Disassemble - - - - - -
14.3.7.9.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.7.9.4 Assemble - - - - - -
14.3.7.9.5 Install on Mount Arm - - - - - -
14.3.7.10 Mounting Arm
14.3.7.10.1 Remove - - - - - -
14.3.7.10.2 Disassemble - - - - - -
14.3.7.10.3 Clean / Inspect / Repair /
Lubricate
- - - - - -
14.3.7.10.4 Assemble - - - - - -
14.3.7.10.5 Install - - - - - -
14.3.7.11 Pintle Post Assembly
14.3.7.11.1 Remove - - - - - -
14.3.7.11.2 Disassemble - - - - - -
14.3.7.11.3 Clean / Inspect / Repair
Lubricate
- - - - - -
14.3.7.11.4 Assemble - - - - - -
14.3.7.11.5 Install - - - - - -
14.4 Test Equipment TR: TOs 33D7-13-228-1
14.4.1 Description - - - - - -
14.4.2 Familiarization
14.4.2.1 TS-4485/288 Tester - - - - - -
14.4.3 Inspect
14.4.3.1 TS-4485/288 Tester - - - - - -
14.4.4 Operate
14.4.4.1 TS-4485/288 Tester - - - - - -
14.5 Fault Isolation Procedures TR: TOs 1H-60(H)G-2-9, 1H-
60(H)G-112, 11W1-13-3-132, 11W1-
13-5-2, 11W1-33-9-2
HH-60 Helicopter
147 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 14.5.1 Principles of Troubleshooting - - - - - -
* 14.5.2 Use Fault Isolation Technical
Orders
- - - - - -
* 14.5.3 Use Schematics / Wiring
Diagrams
- - - - - -
14.5.4 Troubleshoot Circuits - - - - - -
14.5.5 Identify Mechanical
Malfunctions
- - - - - -
14.6 Special Tools TR: TOs 30-10-13, 32-1-101, 32-1-
151, 32-1-201, 32B14-3-1-101,
11W1-13-5-2, 11W1-33-9-2, 11W1-13-3-132, 11W2-6-5-1, 11W2-6-5-2
14.6.1 Dillon Bolt Assembly/Fixture
14.6.2 .50 Caliber Head Space Gauge
14.6.3 .50 Caliber Timing Gauge
14.6.4 .50 Caliber Barrel Erosion
Gauge
14.6.5 .50 Caliber Oil Buffer
Compression Tool
14.6.6 .50 Caliber Combo Wrench
14.6.7 .50 Caliber Firing Pin Hole
Gauge
14.6.8 .50 Caliber Firing Pin
Protrusion Gauge
14.6.9 .50 Caliber Firing Pin
Extractor Tool
14.6.10 M7 Linker / Delinker Tool
14.6.11 Ruptured Case Extractor
14.6.12 M240D Headspace Warning
Gauge
14.6.13 M240D Breech Bore Erosion
Gauge
14.6.14 M240D Firing Pin Protrusion
Gauge
14.6.15 M240D Muzzle and Breech
Bore Wear Gauge
14.6.16 M240D Scraper and Extractor
Tool
14.6.17 M240D Headspace Reject
Tool
14.6.18 M240D Gas Port Erosion Tool
14.6.19 M240D Combination Scraper
Regulator Tool
14.6.20 M240D Reamer
14.6.21 GAU-2 Loading Sector
14.6.22 Small Arms Cleaning Kit
14.7 Support Equipment TR: TO 35C2-2-31-61, Manufactures
Catalog
14.7.1 Use Generator / Rectifier In-
Shop
- - - - - -
14.7.2 Inspect / Use/ Maintain Jet
Washer / Cleaning Vat
- - - - - -
HH-60 Helicopter
148 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
14.8 Perform Basic Post-Flight
Inspection TR: TOs 1H-60(H)G-6, OIs, LCLs
14.8.1 GAU-2 Gun System - - - - - -
14.8.2 GAU-18 Gun System - - - - - -
14.8.3 M240D Gun System - - - - - -
14.9 Armory Procedures TR: AFI 31-101, DoD 5100.76,
5100.2-R, OIs, LCLs
14.9.1 Open / Close - - - - - -
14.9.2 Alarm Test - - - - - -
14.9.3 Duress System - - - - - -
14.9.4 Inventory Procedures - - - - - -
14.9.5 Weapons Loading / Clearing
Procedures
- - - - - -
14.10 Aircraft Weapons Security /
Deployed Weapons Security TR: AFI 31-101, DoD 5100.76, DoD
4160-21, DoD 4160-21-M-1 , OIs,
LCLs
14.10.1 Risk Categories - - - - - -
14.10.2 Protection - - - - - -
14.10.3 Weapons Movement - - - - - -
14.10.4 Storage Requirement - - - - - -
14.11 Airmunitions (See Matrix) TR: TO 1H-60(H)G-33-1-2, 11A1-33,
11A16-39-7, 11A16-45-7, 11A18-10-
7, LCLs
* 14.11.1 Characteristics A - - B - -
14.11.2 Chaff / Flare
14.11.2.1 Inspect - - - - - -
14.11.2.2 Install - - - - - -
14.11.2.3 Remove - - - - - -
14.11.2.4 Stray Voltage Check - - - - - -
14.11.3 Hoist Guillotine Cartridges
14.11.3.1 Remove - - - - - -
14.11.3.2 Inspect - - - - - -
14.11.3.3 Install - - - - - -
14.11.3.4 Stray Voltage Check, Rescue
Hoist, Cargo Hook
- - - - - -
14.11.4 Crew Served Markers / Flares
14.11.4.1 Inspect - - - - - -
HH-60 Helicopter
149 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
MQ-1
150 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
15 MQ-1
15.1 Aerospace Ground Equipment TR: TO 11-1-38, 35D3-2-25-1, 35D3-
2-27-1, 35D3-9-23-1, 35D5-3-8-31,
35F5-5-11-31, 35F5-5-11-22, 35F5-5-
16-1, 35F5-11-61
* 15.1.1 Description A - - B - -
15.1.2 MJ-1 Aerial Stores Lift Truck
* 15.1.2.1 Inspect 3b - - - - -
* 15.1.2.2 Operate 3b - - - - -
* 15.1.2.3 Drive 3b - - - - -
15.1.3 Munitions Handling Trailers
15.1.3.1 Inspect - - - - - -
15.1.3.2 Load / Unload - - - - - -
15.1.3.3 Tie-Down Procedures - - - - - -
15.1.4 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
15.1.4.1 Inspect - - - - - -
15.1.4.2 Maintain - - - - - -
15.1.5 TF-1 Floodlight Set
15.1.5.1 Inspect - - - - - -
15.1.5.2 Operate - - - - - -
15.1.6 FL-1D Floodlight Set
15.1.6.1 Inspect - - - - - -
15.1.6.2 Operate - - - - - -
15.2 Aircraft Familiarization TR: 1Q-1(M)B-2-05JG-00-1, 1Q-
1(R)B2-3-12-1, 1Q-1(R)B-2-4
* 15.2.1 Concept of Operation A - - - - -
* 15.2.2 Security Precautions A - - - - -
* 15.2.3 Aircraft Safety Devices B - - - - -
* 15.2.4 Aircraft Danger Areas B - - - - -
* 15.2.5 Aircraft Switches, Controls,
and Indicators
B - - - - -
* 15.2.6 Aircraft Safe for Maintenance F 2b - - - - -
15.2.7 Single Bay Station (SBS)
15.2.7.1 Power Initialization - - - - - -
15.2.7.2 Power Down - - - - - -
15.2.8 Ruggedized Aircraft
Maintenance Test Stand
(RAMTS)
15.2.8.1 Power Initialization - - - - - -
15.2.8.2 Power Down - - - - - -
15.2.9 Ground Control Station
15.2.9.1 Power Initialization - - - - - -
15.2.9.2 Power Down - - - - - -
15.2.10 28V DC Power Supply
(Sorensen)
15.2.10.1 Power Initialization - - - - - -
15.2.10.2 Power Down - - - - - -
15.3 Weapons Release System TR: 1Q-1(M)B-2-94GS-00-1, 1Q-
1(M)B-2-94JG-00-1, 1Q-1(M)B-2-
05JG-00-1
MQ-1
151 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 15.3.1 Armament Systems Overview B - - - - -
* 15.3.2 Armament System Safety
Hazards
B - - - - -
15.4 Stores Suspension Equipment TR: 1Q-1(M)B-2-05JG-00-1, 1Q-
1(M)B-2-94GS-00-1, 1Q-1(M)B-2-
94JG-00-1, 1Q-1(M)B-2-94JG-30-1,
11B29-3-8-3
* 15.4.1 Description B - - - - -
* 15.4.2 Theory of Operation B - - - - -
* 15.4.3 Function of Parts B - - - - -
15.4.4 Weapons Pylon - - - - - -
15.4.4.1 Remove - - - - - -
15.4.4.2 Disassemble - - - - - -
15.4.4.3 Inspect - - - - - -
15.4.4.4 Repair - - - - - -
15.4.4.5 Assemble - - - - - -
15.4.4.6 Install - - - - - -
15.4.5 Universal Stores Pylon (USP)
15.4.5.1 Remove - - - - - -
15.4.5.2 Disassemble - - - - - -
15.4.5.3 Inspect - - - - - -
15.4.5.4 Repair - - - - - -
15.4.5.5 Assemble - - - - - -
15.4.5.6 Install - - - - - -
15.4.6 MA-4B Bomb Rack
15.4.6.1 Remove - - - - - -
15.4.6.2 Disassemble B - - - - - -
15.4.6.3 Inspect B - - - - - -
15.4.6.4 Repair - - - - - -
15.4.6.5 Assemble B - - - - - -
15.4.6.6 Install - - - - - -
15.4.6.7 Perform Bench Check - - - - - -
15.4.6.8 Perform Operational Check - - - - - -
15.4.7 M299 Launcher
* 15.4.7.1 Remove 2b - - - - -
15.4.7.2 Disassemble - - - - - -
15.4.7.3 Inspect - - - - - -
15.4.7.4 Repair - - - - - -
15.4.7.5 Assemble - - - - - -
* 15.4.7.6 Install 2b - - - - -
15.4.7.6 Perform Weapons System
Confidence Check
- - - - - -
15.4.8 Perform Basic Post-Flight
Inspections
- - - - - -
15.5 Armament System
Components TR: 1Q-1(M)B-2-05JG-00-1, 1Q-
1(M)B-2-94GS-00-1, 1Q-1(M)B-2-
94JG-00-1, 1Q-1(M)B-2-94JG-10-1
15.5.1 AGM-114 Electronics
Assembly (AEA)
* 15.5.1.1 Remove 2b - - - - -
MQ-1
152 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 15.5.1.2 Install 2b - - - - -
15.5.1.3 Reprogram - - - - - -
15.6 Test Equipment TR: 1Q-1(M)B-2-05JG-00-1, 1Q-
1(M)B-2-94JG-00-1
* 15.6.1 Description A - - - - -
15.6.2 Familiarization TR: 1Q-1(M)B-2-05JG-10-1
15.6.2.1 A/N-AWM-101A Tester - - - - - -
15.6.3 Inspect
15.6.3.1 A/N-AWM-101A Tester - - - - - -
15.6.4 Maintain
15.6.4.1 A/N-AWM-101A Tester - - - - - -
15.6.5 Repair
15.6.5.1 A/N-AWM-101A Tester - - - - - -
15.7 Fault Isolation Procedures TR: 1Q-1(M)B-2-94FI-00-1, 1Q-
1(M)B-2-94WD/SD-1, 1Q-1(M)B-2-
94JG-00-1, 1Q-1(M)B-2-05JG-00-1
* 15.7.1 Principles of Troubleshooting A - - - - -
* 15.7.2 Use Fault Isolation Technical
Orders
1a - - - - -
* 15.7.3 Use Schematic / Wiring
Diagrams
1a - - - - -
15.7.4 Troubleshoot Circuits - - - - - -
15.8 Airmunitions (See Matrix) TR: 1Q-1(M)B-33-2-1, 1Q-1(M)B-33-
2-1CL-1, 1Q-1(M)B-2-05JG-00-1
* 15.8.1 Characteristics A - - B - -
15.8.2 Nonnuclear
* 15.8.2.1 Load F 2b - - - - -
* 15.8.2.2 Unload F 2b - - - - -
MQ-1
153 1 January 2012
THIS PAGE INTENTIOANLLY LEFT BLANK
MQ-9
154 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
16 MQ-9
16.1 Aerospace Ground Equipment TR: TOs: 11-1-38, 35D3-2-25-1,
35D3-2-27-1, 35D3-9-23-1, 35D5-3-8-
31, 35DA3-6-37-1, 35F5-5-11-31,
35F5-5-11-22, 35F5-5-16-1, 35F5-11-61
* 16.1.1 Description A - - B - -
16.1.2 MJ-1 Aerial Stores Lift Truck
* 16.1.2.1 Inspect 3b - - - - -
* 16.1.2.2 Operate 3b - - - - -
* 16.1.2.3 Drive 3b - - - - -
16.1.3 MHU-83Munitions Handling /
Loading Lift Truck
* 16.1.3.1 Inspect 1b - - - - -
* 16.1.3.2 Operate 1b - - - - -
* 16.1.3.3 Drive 1b - - - - -
16.1.4 ADU-537A/E Missile
Munition Loading Adapter
16.1.4.1 Inspect - - - - - -
16.1.4.2 Operate - - - - - -
16.1.4.3 Maintain - - - - - -
16.1.5 Munitions Handling Trailers
16.1.5.1 Inspect - - - - - -
16.1.5.2 Load / Unload - - - - - -
16.1.5.3 Tie-Down Procedures - - - - - -
16.1.6 Utility Trailer TR: 36A11-18-3-1, 36A11-18-3-4
16.1.6.1 Inspect - - - - - -
16.1.6.2 Maintain - - - - - -
16.1.7 TF-1 Floodlight Set
16.1.7.1 Inspect - - - - - -
16.1.7.2 Operate - - - - - -
16.1.8 FL-1D Floodlight Set
16.1.8.1 Inspect - - - - - -
16.1.8.2 Operate - - - - - -
16.2 Aircraft Familiarization TR: 1Q-9(M)A-2DB-1: 05GS-00-1;
05JG-00-1; 05JG-10-1
* 16.2.1 Concept of Operation A - - - - -
* 16.2.2 Security Precautions A - - - - -
* 16.2.3 Aircraft Safety Devices B - - - - -
* 16.2.4 Aircraft Danger Areas B - - - - -
* 16.2.5 Aircraft Switches, Controls,
and Indicators
B - - - - -
* 16.2.6 Aircraft Safe for Maintenance F 2b - - - - -
16.2.7 Single Bay Station (SBS)
* 16.2.7.1 Power Initialization - - - - - -
* 16.2.7.2 Power Down - - - - - -
16.2.8 Ruggedized Aircraft
Maintenance Test Stand
(RAMTS)
16.2.8.1 Power Initialization 2b - - - - -
MQ-9
155 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
16.2.8.2 Power Down 2b - - - - -
16.2.9 Ground Control Station
16.2.9.1 Power Initialization - - - - - -
16.2.9.2 Power Down - - - - - -
16.2.10 28V DC Power Supply
(Sorensen)
16.2.10.1 Power Initialization - - - - - -
16.2.10.2 Power Down - - - - - -
16.3 Weapons Release System TR: 1Q-9(M)A-2DB-1: 94GS-00-1
* 16.3.1 Armament Systems Overview B - - - - -
* 16.3.2 Armament System Safety
Hazards
B - - - - -
16.4 Stores Suspension Equipment TR: 1Q-9(M)A-2DB-1: 94JG-00-1;
94JG-30-1
* 16.4.1 Description B - - - - -
* 16.4.2 Theory of Operation B - - - - -
* 16.4.3 Function of Parts B - - - - -
16.4.4 Outboard Pylon
16.4.4.1 Remove - - - - - -
16.4.4.2 Disassemble - - - - - -
16.4.4.3 Inspect - - - - - -
16.4.4.4 Repair - - - - - -
16.4.4.5 Assemble - - - - - -
16.4.4.6 Install - - - - - -
16.4.5 Mid-Station Pylon
* 16.4.5.1 Remove 1b - - - - -
16.4.5.2 Disassemble - - - - - -
16.4.5.3 Inspect - - - - - -
16.4.5.4 Repair - - - - - -
16.4.5.5 Assemble - - - - - -
* 16.4.5.6 Install 1b - - - - -
16.4.6 Inboard Pylon
* 16.4.6.1 Remove 1b - - - - -
16.4.6.2 Disassemble - - - - - -
16.4.6.3 Inspect - - - - - -
16.4.6.4 Repair - - - - - -
16.4.6.5 Assemble - - - - - -
* 16.4.6.6 Install 1b - - - - -
16.4.7 Centerline Pylon
16.4.7.1 Remove - - - - - -
16.4.7.2 Disassemble - - - - - -
16.4.7.3 Inspect - - - - - -
16.4.7.4 Repair - - - - - -
16.4.7.5 Assemble - - - - - -
16.4.7.6 Install - - - - - -
16.4.8 BRU-15 Bomb Rack Unit
* 16.4.8.1 Remove 2b - - - - -
* 16.4.8.2 Disassemble - - - - -
* 16.4.8.3 Inspect B 2b - - - - -
16.4.8.4 Repair - - - - - -
MQ-9
156 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
* 16.4.8.5 Assemble B 2b - - - - -
* 16.4.8.6 Install 2b - - - - -
* 16.4.8.7 Perform Bench Check 2b - - - - -
16.4.8.8 Perform Operational Check - - - - - -
16.4.9 BRU-71 Bomb Rack Unit
16.4.9.1 Remove - - - - - -
16.4.9.2 Disassemble - - - - - -
16.4.9.3 Inspect - - - - - -
16.4.9.4 Repair - - - - - -
16.4.9.5 Assemble - - - - - -
16.4.9.6 Install - - - - - -
16.4.9.7 Perform Bench Check - - - - - -
16.4.9.8 Perform Operational Check - - - - - -
16.4.10 MA-4B Bomb Rack
* 16.4.10.1 Remove 2b - - - - -
* 16.4.10.2 Disassemble 2b - - - - -
* 16.4.10.3 Inspect 2b - - - - -
16.4.10.4 Repair - - - - -
* 16.4.10.5 Assemble 2b - - - - -
* 16.4.10.6 Install 2b - - - - -
* 16.4.10.7 Perform Bench Check 2b - - - - -
16.4.10.8 Perform Operational Check - - - - - -
16.4.11 M299 Dual Rail Launcher
* 16.4.11.1 Remove 2b - - - - -
16.4.11.2 Disassemble - - - - - -
16.4.11.3 Inspect - - - - - -
16.4.11.4 Repair - - - - - -
16.4.11.5 Assemble - - - - - -
* 16.4.11.6 Install 2b - - - - -
* 16.4.11.7 Perform Functional Check 2b - - - - -
16.5 Perform Basic Post-Flight
Inspection TR: 1Q-9(M)A-2DB-1: 94JG-30-1
16.5.1 BRU-15 Bomb Rack Unit 3b - - - - -
16.5.2 BRU-71 Bomb Rack Unit - - - - - -
16.5.3 MA-4B Bomb Rack - - - - - -
16.5.4 M299 Dual Rail Launcher - - - - - -
16.6 Armament System
Components TR: 1Q-9(M)A-2DB-1: 94JG-10-1
16.6.1 Description A - - - - -
16.6.2 Keystone Module Assembly
16.5.2.1 Remove - - - - - -
16.5.2.2 Install - - - - - -
16.5.2.2 Perform Operational Checkout - - - - - -
16.6.3 Mission Control Module
16.5.3.1 Remove - - - - - -
16.5.3.2 Install
16.6.4 Relay Assembly Jettison Arm
16.5.4.1 Remove - - - - - -
16.5.4.2 Install
16.6.5 SSIU Assembly
MQ-9
157 1 January 2012
1. Tasks 2. Core
Tasks 3. Certification for OJT 4. Proficiency Codes Used To Indicate
Training/Information Provided
Knowledge and Technical References A B A B C D E A
3-Skill Level
B
5-Skill Level C
7-Skill Level 5
Level 7
Level Tng Start Tng Done Trainee
Initials
Trainer
Initials
Certifier
Initials
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
(1)
Crse
(2)
CDC
16.5.5.1 Remove - - - - - -
16.5.5.2 Install
16.6.6 AGM-114 Controller Module
16.5.6.1 Remove - - - - - -
16.5.6.2 Install
16.6.7 Power Inverter
16.5.7.1 Remove - - - - - -
16.5.7.2 Install
16.6.8 Inrush Current Limiter
16.5.8.1 Remove - - - - - -
16.5.8.2 Install
16.6.9 Inverter Tray
16.5.9.1 Remove - - - - - -
16.5.9.2 Install
16.7 Test Equipment
16.7.1 Description - - - - - -
16.7.2 Familiarization
* 16.7.2.1 A/N-AWM-101A Tester A - - - - -
16.7.2.2 AN/AWM-103 - - - - - -
16.7.3 Inspect
* 16.7.3.1 A/N-AWM-101A Tester 1a - - - - -
16.7.3.2 AN/AWM-103 - - - - - -
16.7.4 Maintain
16.7.4.1 A/N-AWM-101A Tester - - - - - -
16.7.4.2 AN/AWM-103 - - - - - -
16.7.5 Repair
16.7.4.1 A/N-AWM-101A Tester - - - - - -
16.7.4.2 AN/AWM-103 - - - - - -
16.8 Fault Isolation Procedures TR: 1Q-9(M)A-2DB-1: 94FI-00-1
* 16.8.1 Principles of Troubleshooting A - - - - -
* 16.8.2 Use Fault Isolation Technical
Orders
1a - - - - -
* 16.8.3 Use Schematic / Wiring
Diagrams
1a - - - - -
16.8.4 Troubleshoot Circuits - - - - - -
16.9 Airmunitions (See Matrix) TR: 1Q-9(M)A-33-2-1
* 16.9.1 Characteristics A - - B - -
16.9.2 Nonnuclear
* 16.9.2.1 Load F 1b - - - - -
* 16.9.2.2 Unload F 1b - - - - -