AG

RIC

ULT

UR

AL

www.fptindustrial.com

Agriculture R22Agricultural 39 kW (53 HP) @ 2600 rpm

R22 Stage IIIB / Tier4 Final

SPECIFICATIONS WEIGHT AND DIMENSIONSThermodynamic Cycle Diesel 4 stroke Dimensions LxWxH (mm) 580 x 524 x 723Air Handling TCA Dry Weight Kg 240Arrangement 3LBore x Stroke millimeters 94 x 107 DIMENSIONS CAN BE CHANGED ACCORDING TO ENGINE OPTIONSTotal displacement liters 2.2Valves per cylinder number 0.002Cooling System liquidDirection of Rotation (viewed facing flywheel) CCWCompression ratio 17.5:1Injection System ECREGR -

PERFORMANCESRated power [*] kW (HP) @ rpm 39 (53) @ 2600Peak torque Nm (kgm) @ rpm 180 (18) @ 1800High idle speed rpm -Low idle speed rpm -Minimum starting temperature without auxiliaries °C -30°Oil and oil filter maintenance interval for replacement hours 300

IMAGES SHOWN ARE FOR ILLUSTRATION PURPOSE ONLYSTANDARD CONFIGURATIONFlywheel housing type SAE 4 / SAE 5Flywheel size inch 11" POWER & TORQUEIntake manifold location high / right sideExhaust manifold location high / right sideTurbocharger Fixed Geometry TurboTurbocharger location Top / right sideFan transmission ratio -Distance between fan - crankshaft centers millimeters X=- Y=-Fuel filter numbersingle cartridge with water separator - left sideFuel prefilter -Fuel Pump -Oil filter number single cartdrige - left sideOil sump 30° angularity limits longitudinal with flywheel in high position

Oil vapours blow-by circuit CCV with oil separatorOil heat exchanger -Oil filler On valve cover

12V - 2 kWNOT INCLUDED IN STANDARD CONFIGURATIONPower Take Off (PTO)

12 V - 75 A, 90 AStarterAlternatorEngine stop device -

-Wiring harness - PTO - transmission ratio 1.136:1Painting color grey PTO - maximum available torqueSAE A / Group 2 drive – Intermittent Load 97 Nm SAE A / Group 2 drive – Constant Load 66 Nm -Lift Pump - Battery - minimum capacity recommended Ah 100 Ah (12V)Hydraulic steering pump liters/min - Battery - minimum cold cranking capacity recommended Ah 12 V - 690 AhMaximum torque available from crankshaft pulley Nm -

Arrangement Air Handling Turbocharger Injection System Exhaust System

L (in line) TCA (Turbocharged with aftercooler) WG (Wastegate) M (Mechanical) EGR (Exhaust Gas Recirculation)

V (90° "V" configuration) TC (Turbocharged)

NA (Naturally Aspirated)

VGT (Variable GeometryTurbocharger)

ECR (Electronic Common Rail) SCR (Selective Catalytic Reduction)

EUI (Electronic Unit Injector)

TST (Twin Stage Turbocharge) MPI (Multi Point Injection)

FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE FPT INDUSTRIAL SALES NETWORK OR VISIT OUR SITE WWW.FPTINDUSTRIAL.COM

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE

AG

RIC

ULT

UR

AL

www.fptindustrial.com

PM Particulate MatterHC unburnt HydrocarbonsNOx Nitrogen OxidesCO Carbon MonoxideN2 NitrogenCO2 Carbon DioxideH2O WaterAdBlue®/ DEF = CO(NH ) + H O2 2 2

ELEMENT

DIESEL OXIDATION CATALYST

ADBLUE® / DEF INJECTION

SELECTIVE CATALYTIC REDUCTION ON FILTER

CLEAN-UP CATALYST

Arrangement Air Handling Turbocharger Injection System Exhaust System

L (in line) TCA (Turbocharged with aftercooler) WG (Wastegate) M (Mechanical) EGR (Exhaust Gas Recirculation)

V (90° "V" configuration) TC (Turbocharged)

NA (Naturally Aspirated)

VGT (Variable GeometryTurbocharger)

ECR (Electronic Common Rail) SCR (Selective Catalytic Reduction)

EUI (Electronic Unit Injector)

TST (Twin Stage Turbocharge) MPI (Multi Point Injection)

FOR INFORMATION ON THE AVAILABLE RATINGS NOT LISTED IN THIS DOCUMENT PLEASE CONTACT THE FPT INDUSTRIAL SALES NETWORK OR VISIT OUR SITE WWW.FPTINDUSTRIAL.COM

SPECIFICATION SUBJECT TO CHANGE WITHOUT NOTICE

AFTER TREATMENT SYSTEMAfter Treatment System includes Diesel Oxidation Catalyst (DOC) and Particulate Matter Catalyst (PM-CAT)