agriculture equip

Office: 12F, Bandao Mansion, No.182-8, Haier Road, Qingdao 266100, China Tel:+86-532-55683087/8/9 Fax:+86-532-55683077 E-mail: [email protected] www.hylen.com.cn

of 19

★Seeder The seeders are suitable for drilling peanut, wheat(rice), corn, millet, sorghum,sesame, etc. They

can fertilize while drilling. They can perform drilling. fertilizing. covering. rolling. etc. during one

operation.

Wheat (rice) Seeder

1. Multi-purpose high efficient compound work, such as tillage, pulverization, stubble-cleaning and ditching, seeding, mulching, squashing to be finished once time.

2. Easy operation. May adjust rows spacing by changing different driven gears.Can pick out the whole disc cover when clear the seeds. Their drilling weight. fertilizing weight. drilling depth all

can be adjusted too. And they can carry out high-speed work too. Feed outlet is driven by gear.

There is an anti-reverse mechanism at the inside of driving gear to avoid troubles arising from

machine reverse turning. It can save labors and improve the working efficiency.

3. Wide range of usage. Seed wheat, rice, corn, sorghum, bean, sesame, peanut, cotton and so on with even spacing. Their power transmitting device are consist of rubber wheel. chain and

sprocket. For adapting different agriculture.

4. Safe, durable design for long term use.

Model 2BFX-12 2BFX-24

Ridging distance (mm) 120-160

Matched power (KW) 25-40 80-120

Depth of fertilizer(mm) 30-70

Sowing depth(mm) 30-60

Linkage three point suspension

Fitted speed (km/h) 5-7

Fitted crop wheat， dry field rice

Operation weight (kg) 400KG 800KG


of 19

Corn no-till Fertilizing and Seeder Machine

Model 2BYF-2 2BYF-3 2BYF-4 2BYF-5 2BYF-6

Operating weight(kg) 110 145 190 240 360

Matched power(hp) 12 12-18 15-18 20-25 30-80

Space between rows(mm) 950 500-640 540 500-700

No of Rows 2 3 4 5 6

Fertilization depth (mm) 60-80

Seeding depth(mm) 30-50

Working efficiency(mu/hr) 2.5-3.0 3.0-5.0 5.0-6.0 6.0-8.0 8.0-10.0

Fertilization rate(kg/mu) 75

Corn seeds rate(kg/mu) 1.50-2.35


of 19

★Cropper A cropper is an agricultural machine that can be used to harvest, mow, trim crop. It mainly include

rake, cutrake, lawn mower, reciprocating cropper/mower, grass cutter etc.

9GB series Reciprocating Cropper

1. Wide range of use. it is suitable to be used to reap natural forage grass and plant herbage,

alfalfa, reed, grass feed etc. in level grass land for agricultural, forest and pasturing area, and in

different condition grass land In the sloping field and hills area. The machine is divided into

left-side power output and rear power output according to matched power output modle, and

matched with left-side power output and rear-side power output of tractor separately.

2. Easy operation. it uses the tractors power output shaft to promote the mowers movement of

blade, used the three-points suspension structure to make the machine rise and fall, operate the

power output structure(operate the clutch of tractor)to realize the moving and stopping of blades,

lifting mechanism is divided into two models of cylinder and lifting frame. All works can be done

by a single person i.e. driver of tractor.

3. Durable and good performance. the machine is of good power-driven performance, as the

machine meets obstacle, and blade can be lifted by operating the hydraulic equipment of tractor.

the machine has the features like simple structure easily, strength in cutting ,lower and trim

cutting stubble, reliable operation and so on.

Model 9GB-1.4 9GB-1.8 9GB-2.1

Cutting width(m) 1.4 1.8 2.1

Working speed(km/h) 6-8

Productivity(ha/h) 0.8-1.5

Average cutting height(mm) 60-80

PTO speed(r/mm) 540

Matched power(HP) 18-30

Weight(kg) 125 130 140

Work condition 2400×670×660 2800×670×660 3100×670×660 Overall

dimension(mm) Trans. condition 880×670×1650 880×670×2050 880×670×2450


of 19

9GBL series Cutrake

9GBL raker and mower and rake makes use of an offset type crank connecting rod mechanism to

drive a knife to carry out the mowing operation when a rake mechanism rakes the hay. The machine

is mainly suitable for the native grass and planted grass mowing and raking operations in the

pasture land in the agricultural and pastoral areas, and mountainous area and hill pasture lands.

Model 9GBL-1.4 9GBL-1.6 9GBL-1.8 9GBL-2.1

Cutting width (M) 1.4 1.6 1.8 2.1

Raking width (M) 1.4 1.6 1.8 2.1

Stubble Height (mm) 50-60

Operation weight (kg) 360 380 400 420

Matched power (hp) 18 20 25 30

Linkage Trailed


of 19

★Rake 9GL hay rake, matching with a small four-wheel tractor, is mainly used for the hay collecting

operations after mowing. The implement adopts a hydraulic overturning mechanism and spring

steel rake fingers. During the working process, the rake fingers can be overturned by the hydraulic

overturning mechanism so as to realize the offloading of the hay.

★Lawn Mower FT series of lawn-mower is mainly used for harvesting the grass which grows at the farm, golf

course, large lawn recuperation, etc. This machine is compact in structure, advanced in

performance.

Model 9GL-1.4 9GL-1.6 9GL-1.8 9GL-2.1

Working width(mm) 1400 1600 1800 2100

Matched power(hp) 20-25 20-25 20-25 20-25

Productivity (ha/h) 15-20 15-20 15-20 15-20

Weight(kg) 95 100 100 105

Model 4FT 5FT 6FT

Overall dimensions (mm) 2360*1180*1100 2850*1660*1100 3160*1960*1100

Weight (Kg) 170 200 350

Cutting Width (m) 1.0 1.5 1.8

Fitted Power (HP) 18-30 45-60

Cutting Height (mm) 25-100

Linkage Three points semi –mounted


of 19

★Rotavator A rotavator is a machine used in gardens and allotments to churn up and dig over the ground

without laborious manual work with spades or forks.

It adopts middle gear transmission system, which mounted with the tractor of 12-130hp .tractor’s

wheel tracks are completely covered after tillage as the working width is much wider. the quality is

reliable and the performance is well. so it can be used on dry and paddy field. it can reduce the time,

labor and cost, etc.

★Plow

A plough or plow is a tool used in farming for initial cultivation of soil in preparation for sowing seed

or planting, including moldboard plow, chisel plow and disc plow. The primary purpose of ploughing

is to turn over the upper layer of the soil, bringing fresh nutrients to the surface, while burying weeds

and the remains of previous crops, allowing them to break down. It also aerates the soil, and allows

it to hold moisture better. In modern use, a ploughed field is typically left to dry out, and is then

harrowed before planting.

Model 1GN-100 1GN-120 1GN-140 1GN-160 1GN-180 1GN-200 1GN-250

Overall Dimensions

(L*W*H) (mm)

800*1250*830 800*1550*830 80*165*830 80*180*830 900*2000*950 900*2200*950 1050*2770*1150

Working width (mm) 1000 1200 1400 1600 1800 2000 2500

Operation weight

(Kg) 185 190 205 255 380 420 450

Matched power (HP) 18-25 18-25 25-30 30-40 50-55 50-65 80-100

Linkage Three Point mounted


of 19

Hydraulic Swivel Plough

1. Durable and long term use. The plowshare is made of special wear-resistant steel.

2. Wide range of usage. The compact-structured plough is easy for soil breaking, soil raising and

soil turning in the plain or sloped farm.

3. Good performance. After working, the land surface is flat. The soil clods are well crushed and

turned over. The furrows are small and without crests.

Working

width per

plough(mm)

Working

depth

(mm)

Mode of

turn over

2 furrow 3furrow 4 furrow 5 furrow 6 furrow

Model

/width(mm)

1LJF230/

60

1LJF330/90 300 180-250 mechanical

Matched

power(HP)

30-50 24-30

Model

/width(mm)

1LYF425

/100

1LYF525

/125

1LYF625/

150

250 160-240 Hydraulic

Matched

power(HP)

40-50 60-70 80-90

Model

/width(mm)

1LYF427

/108

1LYF527

/135


Matched

power(HP)

55-65 80-90

Model

/width(mm)

1LYF335/1

05

1LYF435

/140

1LYF535

/175


Matched

power(HP)

65-90 75-90 100-120


of 19

Furrow plough

1. Easy operation. simple in structure and light in weight.

2. Good performance. After working, the land surface is plain and the furrow is narrow.The soils

are well crushed. The outer layer of soil and organic compound on the surface are covered

deeply under the earth. So as to be quickly decomposed to fertilize the soil.

3. Suitable for sandy loam, loam, clay soil on the cultivated farm with the soil resistance less than

1.20kgs/cm2 and paddy field without water.

4. Welded cross shaft frame support makes this equipment more stable and anti-aging.

Model 1L-430 1L-435 1L-535 1L-220 1L-320 1L-420 1L-325 1L-425 1L-525

Matched power(hp) 55-70 70-100 80-120 12-15 25-30 30 35 50 65

Operation Weight(kg) 360 370 470 80 115 145 228 330 435

No of Plough 4 4 5 2 3 4 3 4 5

Working width(m) 1.2 1.4 1.75 0.4 0.6 0.8 0.75 1.0 1.25

Working depth(mm) 160-280 200-250

Linkage Three point suspension

Model 1L-427 1L-527 1L-627 1L-727

Matched power(HP) 40-60 60-70 70-80 75-80

Productivity (mu/h) 6-8 8-10 10-12 12-14


No. of plow 4 5 6 7

Working width(mm) 1080 1350 1620 1890

Working depth(mm) 160-250

linkage three-point mounted


of 19

★Disc Harrow A disc harrow is a farm implement that is used to cultivate the soil where crops are to be planted. It

is also used to chop up unwanted weeds or crop remainders. It consists of many iron or steel discs

which have slight concavity and are arranged into two or four sections. When viewed from above,

the four sections would appear to form an "X" which has been flattened to be wider than it is tall.

The discs are also offset so that they are not parallel with the overall direction of the implement. This

is so they slice the ground they cut over a little bit to optimize the result. The concavity of the discs

as well as their being offset causes them to loosen and pick up the soil they cut.

Light Duty harrow

1. The 1BQX series Light-duty Disc Harrow are suitable for pulverized and loosening clods after

ploughing and for planning the land before sowing on cultivated land. The machines can make

soil and fertilizer mix up, and clear away the stump of plants on light or medium soil and

preparing seed bed for planting.

2. The series Light-duty Disc Harrow frame are made of qualified steel tube, Their structures are

simple and reasonable, strong and durable, convenient to operate, easy to maintain and

efficient in pulverizing and penetrating into the soil and leaves the land with a smooth, even tilth.

All these satisfy the agricultural requirements of intensive cultivation.

3. The 1BQX series suspension Light-duty Disc Harrow’s front and rear gangs are all assembled

with scalloped disc, could be used with from 12HP to 80HP type tractors.

Model 1BQX-1.1 1BQX-1.3 1BQX-1.5 1BQX-1.7 1BQX-2.0 1BQX-2.2 1BQX-2.3

Working width(mm) 1100 1300 1500 1700 2000 2200 2300

Working depth(mm) 100-140

No. of disc 12 14 16 18 20 22 24

Dia. Of disc

(mm/inch) 460 / 18”

Weight (kg) 200 220 250 270 300 400 420

Linkage Three point mounted

Matched power (hp) 12-18 15-18 20-25 25-30 35-40 40-45 55


of 19

Offset Mid-duty Harrow

The machine is suitable for pulverizing and loosening clods after plowing and for planning the land

before sowing on cultivated land, it can make soil and fertilizer mix up, and clean away the stump of

plants. With the reasonable structure, the machine is durable in service, easy to be operated and

maintained, the land surface is smooth.

Model 1BJX-1.7 1BJX-2.0 1BJX-2.2 1BJX-2.4 1BJX-2.5 1BJX-2.8

Working width (mm) 1700 2000 2200 2400 2500 2800

Working depth (mm) 140

No. of disc 16 18 20 22 24 26

Dia. Of disc (mm) 560

Weight (kg) 400 434 463 620 760 800

Linkage Three point mounted

Matched power (hp) 45 50-55 55-60 65-70 75 80

Hydraulic Offet Light-duty Harrow

The series mounted light-duty disc harrows are suitable for pulverized loosening colds after

ploughing and for planning the land before sowing on cultivated land.The machines can mix up soil

and fertilizer and clear away the stump of plants on light soil and prepair seed bed for planting.


of 19

Hydraulic Double Folding-wing Offset Mid-duty Harrow

Feature:

Suitable for crushing the heavy clay soil after tillage.

Wide range of working, narrow transportation, wing-folding easily, compact construction, high

productivity, convenient operation and easily maintenance.

Model 1BQ-3.3 1BQ-3.4

Working width (mm) 3300 3400

Working depth (mm) 100-140

No. of disc 40 42

Dia. of disc (mm/inch) 460 / 18"

Weight (kg) 1000 1050

Linkage Trailed

Matched power (Hp) 80-100

Model 1BJ-4.4 1BJ-5.3 1BJ-6.0

Working width (mm) 4400 5300 6000

working depth (mm) 140


No. of disc 40 48 56

Operation weight (kg) 1750 2200 2520

Matched power (Hp) 75-100 100-120

Productivity (Ha/hr) 2.7 3.3 3.5


of 19

Semi-hanging Offset Heavy-duty Harrow

It is suitable for stubbing before plowing and crushing soil after plowing in the waste land and heavy

soil. The harrow can also replace a plow to carry out the first operation in the long-cultivated land.

The harrow performs well in surface leveling, soil crushing and stubbing after plowing. The harrow

has the advantages of easy hanging, convenient adjustment, flexible turning, good road passing

performance, etc.

Hydraulic Pair-setting Heavy Harrow

It is applicable for breaking up the clods and loosening of wasteland, shrub swamp, heavy soil, can

rake the land instead of plough. With wide coverage, reasonable structure, strong ability to rake;

easy to use and maintain etc.

Model 1BZ(BX)-1.8 1BZ(BX)-2.0 1BZ(BX)-2.5 1BZ(BX)-3.0

Working width (mm) 1800 2000 2500 3000


No. of disc 18 20 24 28


Operation Weight (kg) 840 1050 1200 1350

Linkage Semi—mounted

Matched Power (hp) 70-90 100-120


of 19

Semi-hanging Offset Heavy Harrow

Having absorbed all advantages from such machines of foreigners and Chinese, this harrow is

designed according to the standard as the assembled structure, the main frame is welded with

rectangular tubes, on which assembled with hydraulic lifting transportation wheels, spring

adjustable device and special used bearing assemblies. Therefore this machine is strong and

durable for operation with the reasonable structure, convenient for transportation; turning radius is

small, easy to be adjusted and maintained, etc.

Model 1BZD-2.5 1BZD-2.8 1BZD-3.1 1BZD-3.7 1BZD-4.1 1BZD-4.7

Operation weight (kg) 1800 2000 2700 2800 2980 3360

No. of disc 22 26 28 32 36 42

Dia Of disc (mm) 660

Working width (mm) 2500 2800 3100 3700 4100 4700

Working depth (mm) 180-220

Matched power (hp) 100-120 120 120-150

Model 1BZ-2.0 1BZ-2.2 1BZ-2.5 1BZ-3.0 1BZ-3.4

Working width (mm) 2000 2200 2500 3000 3400


No. of disc 18 20 24 28 32


Operation weight (Kg) 1150 1250 1350 1500 1650

Linkage Trailed

Matched power (hp) 75-80 80-100 90-100 100-120


of 19

★Reaper A reaper is a machine that reaps (cuts and gathers) crops at harvest, when they are ripe.

This machine should be matched with walking tractor for working, which has small size with light

weight. It is very easy and convenient to operate, low stubble, which won’t be limited by rows

spacing and ridges spacing, widely used for harvesting in small, middle, large plot fields, especially

working in paddy field.

★Ridger It is used for making ridges for planting tobacco, potato and other vegetables. The ridger fully

adjustable for giving different accurate row widths. To obtain the correct ridge profile and retain soil

flow, the high grade mould boards are adjustable. The ridger can also be used for earthing up the

crops sown in rows.

1. Good ability of adaption. Easy and convenient adjustment in ridging spacing,ridging height,

ridging rows and angle.

2. wide range of matched tractors.

3. Easy operation and movement with small size

4. precision manufacturing.

5. break stubble and ridge with one stop

Model 4GL-130 4GL-140 4GL-160

Matched power (Hp/Kw) 12-25/8.8-18.4 18-30/13.2-22

Cutting width(m) 1.3 1.4 1.6

Weight(kg) 90 155 160

Cutting height(cm) 6-10

Productivity(ha/h) 0.21-0.32 0.37-0.5 0.37-0.5


of 19

3QL series Ridger

1ZX series Adjustable Ridger

3Z series Adjustable Ridger

Model 3Z-80 3Z-120 3Z-180 3Z-260

Overall Dimension (mm) 1200*1000*1000 1200*1500*1000 1200*2050*1300 1200*270*1300

Working width (mm) 800 1200 1800 2600

Width of Ridge (mm) 200-450 200-450 200-450 300-500

Height of Ridge (mm) 150-240 150-240 150-300 150-300

Weight (kg) 150 160 200 280

Matched Power (hp) 15-20 25-30 55-70 60-90

Model 3QL-3 3QL-4 3QL-5

Working width (mm) 2500 3200 3900

Ridging space (mm) 700-900 700-900 700-900

Ridging height (mm) 200-250 200-250 200-250

Matched power (Hp) 40 60 80

Model 1ZXQ-2 1ZX-2

Overall dimensions (mm) 2000*1170*700 2700*1170*710

No. of Ridger 2 2

Ridger height (mm) ≥300

No of Disc 4

Dia of Disc (mm) 560 660

Linkage Type 1 .three-point mounted

Matched power(HP) 35-40 75-80

Productivity (ha/h) 0.7-1.0 0.7-1.0


of 19

★Planter A Planter is a farm implement towed behind a tractor, used for sowing crops through a field. Our

planter can be used to plant all kinds of yams.

CRD Spreader

It is mainly used for spreading fertilizer in the field before cultivation and seeding after cultivation or

applying fertilizer during seeding. This machine has compact structure, good performance, wide

range of application, high working efficiency and the ability to equally seed and fertilize and so on.

Yam Planter:

◆easy to operate. ◆the latest design. ◆types and colors optional. ◆stable working

Model CRD-600 CRD-400

Length (mm) 1150 1150

Width (mm) 1100 1150

Overall

Dimensions

Height (mm) 1450 1200

Weight (kg) 70 65

Working Width (M) 16-30 16-30

Matched Power (Hp/Kw) 18-25/13.2-18.4

Model 2CM-2 (double row)2CM-1（single

row）

2CM-2A（double

tidge/four row）

Operation weight(KG) 200 180 350

Row span (mm) 500---850 --------- 500---1000

Planting distance (mm) 280---350 180-350 180---350

Productivity (km/h) 0.4---0.6 ---------- 0.6--1

Seed tank capacity (m3) 0.24*2 0.24*1 0.24*2

ManureTank capacity (m3) 0.08*1 0.08*1 0.08*2

Matched power (HP) 20--35 20--35 50--90


of 19

★Yam Harvester This series harvester is mainly driven by tractors with 22-80hp, which is suitable for potatoes, sweet

potatoes, garlic and other root crops. The principle is excavating the crops with soil and separating

by the vibration screen.

4U Series Potato Harvester is mainly used for harvesting potato, garlic, sweet potato, peanut and

other crops under the ground with the advantages of simple structure, high efficiency, lower

breakage, running fast without trembling, and no blocking by the grasses.

Model 4U--1 4U—1A 4U—1B 4UZ-1 4U—2 4U—2B 4U--3

No. of Rows Single Single Single Single Double Double Double

Function Scattering Matched

hand tractor

Bunched

Dumping Scattering Scattering

Bunched

Dumping

Double

self-loading

Space of rows

(mm) 550--800 500-65 550--800 550--800 550--800 550--800 550--800

Productivity

(ha/h) 0.2—0.35 0.35—0.55 0.55—1.0

Total weight

(kg) 195 100 210 160 600 700 1200

Matched power

(HP) 22--35 8—15 22--35 22--35 50--80 50--80 70--120

Working depth

(mm) 250 200 250 250 250 250 250

working width

(mm) 650 560 650 650 1650 1650 1650

Appearing rate ≥96%

Break skin rate ≤2%

PTO speed

(RPM） 560/1250 1000 560/1250 560/1250 560 560 560

Overall dim

(mm) 2400*900*900 900*700*700 2400*900*900 1200*1000*750 2800*2200*1000 2800*2200*1000 3300*3900*3100


of 19

★Self-power Thresher A threshing machine is a machine for the separation of grain from stalks and husks. We sell

threshers with rated power from 7.5-13 Kw, and productivity from 800-1500 Kg/h.

This machine used for threshing corn cob and other rod-shaped grain. It has the compact structure,

beautiful shape, high frequency and reliable operation.

It can be connected with many kinds of tractors. Even if there is no tractor, it can be connected with

various types of motors both one-phase and three-phase.

Model 5TD-75 5TD-100 5TD-125 5TD-135

Rotary drum’s speed (rpm) 1200 1150 1050 1000

Power of motor (kw) 7.5 7.5-11 11 11～13

Model of motor Y132M-4 Y160M-4

Vibrating speed (HZ) 5.25 3.89

Swing span (mm) 20 40

Productivity (Kg/h) 800-1000 800-1200 1000-1400 1100-1500


Total loss rate ≤1.5%

Broken rate ≤1.5%

Impurity rate ≤2%

Unit productivity (kg/kWh) ≥130


of 19

★Earth auger

Model 1WX-230 1WX-300 1WX-400 1WX-5001WX-600 1WX-700 1WX-800 1WX-1000

Overall dimension (mm) 2300×800×1650 2350×800×1650 2400×800×

1650

2450×1000×

1650

Dia. (mm) 230 300 400 500 600 700 800 1000

Working depth (mm) 400-700 500-800 500-1000

Matched power (kw) 14.7-29.4 22-53 36.7-55

Operation weight (kg) 150 165 230 240 251 260 270 300

PTO speed (rpm) 540

Gearbox ratio 2.92：1

2.18：1(when PTO speed is 540rpms),

3:1(when PTO speed is 720 or 760rpms).

Linkage Three point suspension

Productivity (caves/h) 60-150 60-120 30-60

Transport clearance ＞300mm

agriculture equip

Business

power output of tractor

rear power output

power output structureoperate

matched power output

matched power hp

matched power kw25

rake mechanism

agricultural machine