agronic · 2016. 10. 18. · agronic multibalers are developed with strong focus on quality and...

5
Baler-wrapper combination Quality for green fields all over the world! AGRO NIC MultiBalers

Upload: others

Post on 02-Mar-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: AGRONIC · 2016. 10. 18. · AGRONIC MultiBalers are developed with strong focus on quality and capacity. Both machines, the MR 820 MultiBaler and the MR 1210 MultiBaler produces

Baler-wrapper combination

Quality for green fields all over the world!

AGRONIC MultiBalers

Page 2: AGRONIC · 2016. 10. 18. · AGRONIC MultiBalers are developed with strong focus on quality and capacity. Both machines, the MR 820 MultiBaler and the MR 1210 MultiBaler produces

ADDITIONAL OPTIONS:

ELECTROPOWERPACK

Good solution for inside operation. Electric drive saves space, produces no exhaust gases and cost of operation are very low. Electric drive is due to steel frame roof construction also suitable for outdoor use. Easy transport to the base with forklift slings. Vol-

DIESELPOWERPACK

Cost effective operation due to low diesel consumption. Engine installed on machine which make stand-alone work and mobile work easy possible.

Engine is silent pack ver-sion and generates very lit-tle noise during operation. Engine certified to EU 97/68 Stage 3A.

DROPBUNKER

When loading capacity is really a requirement.Loading volume from this drop bunker is 2.5-3.0 ton-nes. Trucks or trailers can un-load directly and the ma-terial will be transported to the machine’s hopper. Hydraulic or electrically operated.

ADDITIVE SYS-TEM

Fullautomatic additive sys-tem. For pumping & dosing commonly used silage ad-ditives. Pump capacity 10 l/min. Stainless steel pump, nozzle bar and nozzles.System operation is inte-grated in machines com-puter. 40 liters additive stock available.

LUBRICATION SYSTEM

Lincoln lubrication system. Easy and effortless lubri-cation of all bearings on machine.Automatic operation after preset time-interval. Reservoir size 4 liters.This guarantees an excepti-onally long lifetime. Valuable option for the de-manding user.

Page 3: AGRONIC · 2016. 10. 18. · AGRONIC MultiBalers are developed with strong focus on quality and capacity. Both machines, the MR 820 MultiBaler and the MR 1210 MultiBaler produces

MR 820 & MR 1210 MultiBalerEasy to handle round bales! The AGRONIC MR 820 & MR 1210 MultiBaler are the perfect, easy-to-use bale-wrap-per combinations for round bales. Widely known in the compacting industry all over the world. Two machine versions, each for specific users.

AGRONIC MultiBalers compact a wide variety chopped materials such as mai-ze, beetpulp, TMR, grass, alfalfa, straw and many other organic products in round bales. The end-product; high density bales, ensures a good quality feed.

AGRONIC MultiBalers are developed to make silage baling easier and this results in the following advantages:

// Cost efficient baling.

// High density bales ensures quality feed for a long period.

// Small units available that can be fed in a quick way.

// Easy and economic transport of bulk material in round bales.

// Easy and economic storage without having high investments.

// Clean production process without losses.

Extendable film-/netwrap system which sim-plifies the replacement of a film or net roll.

Variable balesize possible with AGRONIC MultiBalers from 80-120 cm. Width 85 or 100 cm. Bale weights varying from 250-1000 kg.

MR 820 MultiBaler’s hopper with 2.5 m3 vo-lume, enough capacity to produce two bales. With bottom chain for easy infeeding.

Patented wrapping concept. Wrapper and return-system are combined. Return-system brings losses back into the infeeding hopper.

Characteristics of AGRONIC MultiBalers:Loading material and transport to bale chamber

Bulk material is loaded into the machine’s hopper either by using a conveyor belt or by using a wheel loader or front end loader. The optional Drop Bunker for MultiBaler makes it also possible to unload bulk material directly with a dumper, push-off trailer or truck. After loading, the bulk material is transported automatically by a bottom conveyor in one straight way to the bale chamber. As the material do not have to move up or down during in feeding to the chamber, you are ensured that all (longer bulk) materials are easy transported. This makes the numbers of stops in the baling process kept at a minimum. The in feeding speed of the bottom conveyor automatically adapts to the material quantity.

Baling with high bale densityMaterial is compressed in the chamber where the special designed tight chain system subjects all materials to a high degree of compression.End results are bales from 80 cm. - 120 cm. diameter and weights varying from 250 kg. - 1000 kg.

Binding with double film or net A perfect binding system makes a perfect shaped bale. The AGRONIC MultiBalers offers both a film binding unit as a net binding unit. The customer decides which material is used to wrap the bale. The Film & Film principle is based on a layer of wide plastic which is applied in the bale chamber so as to perfectly maintain both shape and density of the bale. The F&F wrapping system also helps to reduce silage losses through an enhanced oxygen barrier that discourages mould growth.

Wrapping with twin wrapping arm with film control systemAfter the bale is released out of the chamber where some layers of net or film are applied around the bale, the bale is transported to the patented wrapping system. A predeter-mined number of layers wrapping film is then applied with its standard twin wrapping arm including two 500 or 750 mm film stretching unit. This wrapping system is equipped with automatic film control system. Two sensors are monitoring the film and respond quickly when the film has run out or when the film tears.

Integrated return system (patented)The return system, which is integrated in the wrapping table is running along the entire length of the machine. This system prevents against losses and catches crumbs and feeds and bring them back, by using a vertical conveyor into the hopper without delays and losses. Loading process continuous constantly in this way and the machine keeps running all the time.

Bale release and transportA perfectly shaped, high quality bale, is the end result of this process. When a bale is wrapped it can be unloaded automatically or manually from the machine by using a bale ramp. The bale is now ready for stowing and transport. Easy to handle bales which find their ways to all different kind of customers.

Page 4: AGRONIC · 2016. 10. 18. · AGRONIC MultiBalers are developed with strong focus on quality and capacity. Both machines, the MR 820 MultiBaler and the MR 1210 MultiBaler produces

High capacity baling for the demanding user! The AGRONIC MultiBalers are developed with strong focus on quality and capacity. Both machines, the MR 820 MultiBaler and the MR 1210 MultiBaler produces bales for demanding users with high density and capacity.

The AGRONIC MR 820 MultiBaler produces a bale with a variable diameter size from 80 - 90 cm. and a width of 85 cm. Baleweight varies from 250 - 450 kg.

The AGRONIC MR 1210 MultiBaler produces a bale with a variable diameter size from 100 - 120 cm. and a width of 100 cm. Baleweight varies from 600 - 1000 kg.

MR 1210 MultiBaler’s hopper with 4.0 m3 vo-lume. With bottom chain and augers for easy material infeeding.

Return system prevents against losses and catches crumbs, to bring them back, by using a vertical conveyor, into the hopper.

Modern control system. User friendly inter-face and easy to tune to work in all circums-tances. Different languages can be used.

Film & Film wrapping helps to reduce silage losses through an enhanced oxygen barrier that discourages mould growth.

In combination with all available machine options we are offering highly customized machines to meet the customer’s specific needs. For this reason AGRONIC MultiBalers are operating worldwide in all configurations and circumstances.

Are you the next MultiBaler user...?

MR 820 & MR 1210 MultiBalerMobile & Stationary use

One unique advantage of Agronic MultiBalers is the versatility in use. We take market needs and wishes into account when de-veloping machines.

For that reason both MR 820 & MR 1210 MultiBaler are also usa-ble as a mobile machine in the field in combination with a self-propelled harvester or tractor-carried harvester. This makes the machine extremely efficient and saves in logistical costs.

Transport & Logistics

No time is needed for setup the AGRONIC MultiBaler and prepa-re it for work! This is a feature of no little importance especially for professional users who needs to change locations several times a day.The users only needs to extend the support feet and start the tractor’s PTO or machine’s engine and the AGRONIC MultiBaler is ready for work.When the work is finished the user can go directly to a new cus-tomer in order to keep the high efficiency.

Page 5: AGRONIC · 2016. 10. 18. · AGRONIC MultiBalers are developed with strong focus on quality and capacity. Both machines, the MR 820 MultiBaler and the MR 1210 MultiBaler produces

Distributed by:

MR 1210 MultiBaler:

Transport length Transport width Transport height WheelsWeight (unladen) Bale size (width x diameter) Bale volume Attachment to tractor PTO Required Hp Volume hopper Hydraulic requirements Electrical requirements Control systemFilm dispenser

MR 820 MultiBaler:Specifications:

Technical Data

Standard MultiBaler features

Sales Office: Gebr. Knoll - Baling & Wrapping Email: [email protected] Rouveen, The Netherlands Web: www.gebrknoll.nl

7.00 mtr. 2.19 mtr.3.03 mtr.295/60-153400 kgs.85 cm. x Ø 80-90 cm. 0,48 m3 - 0,54 m32 point linkage540 rpm. 70 Hp / 52 kW. 2.50 m3 1x 1/2’’, 1x 3/4’’ free-return 12 volt DCElectronic Control Unit2x 500 mm.

- Road lights- Integrated return system - Automatic filmcontrol system- Automatic chain lubrication grease system on bale chamber - PTO-shaft with slip clutch - Roll bar for unloading bales- Extra wrapping film storage for 5 reels + 1 roll net on MR 820 MultiBaler- Light system with flash light indication for loading & net/film binding

Due to our policy of product improvement, we reserve the right to alter specifications and construction without notice.

:::::::::::::::

8.78 mtr. 2.87 mtr.3.10 mtr.500/50-176500 kgs.100 cm. x Ø 100-120 cm. 0,78 m3 - 1,14 m32 point linkage540 rpm. 95 Hp / 70 kW. 4.00 m3 None. Own hydraulic system 12 volt DCElectronic Control Unit2x 750 mm.