ahead with innovation · en 397 ∙ ansi/isea z89.1-2014 type 1, class c packaging: 1 helmet per...

EDITION 1

AHEA

D W

ITH

INN

OVA

TIO

N

CONTENTS A 03 - 05 INTRODUCTION

A 06 - 07 CRASHBOX SYSTEM

PRODUCTS A 08 - 09 INTRODUCTION TO RANGER HELMETS

A 10 - 11 RANGER

A 12 - 13 E-RANGER

A 14 - 15 INTRODUCTION TO ROCKMAN HELMETS

A 16 - 17 ROCKMAN SERIES 3



A 22 - 23 ROCKMAN TE6

A 24 - 25 FORESTRY COMBINATIONS

A 26 - 27 E-MAN 4000 / 7000

A 28 - 29 ACCESSORIES

A 30 BESPOKE DESIGN AND BADGING SERVICE

A 31 GUIDE TO EUROPEAN STANDARDS

A 32 - 33 HELMET ORDERING CODES

A 34 - 35 GLOBUS GROUP

3

ALWAYS AHEAD ENHA’S REPUTATION FOR MANUFACTURING INNOVATIVE SAFETY HELMETS IS WELL ESTABLISHED.

For over 25 years customers from across the world have been testament to the unwavering quality and performance that is evident within a broad product portfolio.

The range includes products that incorporate patented technology to provide enhanced safety benefits for the wearer. This includes the Crashbox impact absorption system that features within the highly acclaimed Ranger and E-MAN safety helmets.

QUALITY GERMAN ENGINEERING

ENHA SAFETY HELMETS ARE DEVELOPED, DESIGNED AND MANUFACTURED IN GERMANY AT WHOLLY OWNED, ISO 9001 CERTIFIED FACILITIES UTILISING CUTTING EDGE PRODUCTION TECHNIQUES.

ENHA’s own testing environment follows EN 397 regulations in which helmets are tested daily under diff erent temperature settings varying between 50°C and -30°C.

The high quality of ENHA products is also evident as a result of each helmet being manufactured exclusively using premium ultraviolet (UV) stabilised virgin granulate materials.

This helps to ensure that any weathering effects of heat, cold and varying temperature fluctuations do not affect performance or reliability.

2001

2009

2011

2016

5

EUROPEAN HEAD PROTECTIONNEW PRODUCT INNOVATION AWARD

2016

AWARD- WINNING Strong overall performance and unique design

features, such as the innovative Crashbox system incorporated into the Ranger and E-MAN helmets, combine to provide state-of-the-art head protection. These achievements have resulted in ENHA receiving multiple awards.

HEALTH & SAFETY AWARD BY THE GERMAN QUARRY ASSOCIATION (ROCKMAN HELMETS)

RED DOT AWARD FOR DESIGN

(E-MAN HELMETS)

NICOLAUS AUGUST OTTO AWARD

FOR INNOVATION (RANGER HELMETS)

FROST & SULLIVAN NEW PRODUCT

INNOVATION AWARD IN EUROPEAN

HEAD PROTECTION (RANGER HELMETS)

CRASHBOX PATENTED DOUBLE-WALLED IMPACT ABSORPTION SYSTEM

ENHA’s pioneering Crashbox is strategically located in the crown of the helmet to ensure the best possible protection in the area where an impact will most likely occur.

Double-walled construction improves stability

Specially-designed torsion cylinders connect to corresponding cylindrical rods beneath the Crashbox lid

7

HELMETS WITH THE CRASHBOX SIGNIFICANTLY REDUCE THE AMOUNT

OF IMPACT ENERGY PASSED FROM THE SHELL TO THE WEARER

Any impact in the Crashbox zone will compress the lid. The rods will be driven into the torsion

cylinders using a rotating motion

This instantly absorbs part of the impact energy before reaching the wearer’s head, by controlling and reducing the amount being passed from the shell to the harness

The Crashbox works on the same principle as a crumple

zone within a modern car

Crashbox features in helmets within the Ranger and E-MAN ranges. See pages 10-13 / 26-27

8

MULTIPLE COLOUR COMBINATIONS OF SHELL AND

CRASHBOX ARE AVAILABLE MADE OF UV STABILISED VIRGIN GRANULATE TO REDUCE AGEING

HELMETS ENHA’s Ranger helmets reflect the company’s in-depth understanding of customer needs and its ability to address demand through product innovation.

They are award-winning, exceed the demands of EN 397 and include innovative features that are revolutionising the head protection market. Such features include the Crashbox as well as patented oval shaped slots on the side of the helmet which refrain from cracking should permanent pressure be applied from the personal protective equipment attached.

9


2016

LONGER LASTING, SAFER HELMETS

AWARD-WINNING

“The performance quality of RANGER helmets is unrivalled, even in the most

rigorous of workplace conditions.”

FOR ELECTRICAL APPLICATIONS, THE

SPECIALIST E-RANGER MODEL IS AVAILABLE

VISIBILITY ENHANCED WITH A BESPOKE SET OF

REFLECTIVE STICKERS

REDUCE IMPACT ENERGY TO THE HEAD

ENHA’s pioneering Crashbox is strategically located in the crown of the helmet to ensure

the best possible protection in the area where an impact will most likely occur.

INCREASE HELMET LIFE BY 50%

Ranger helmets are double-walled. The Crashbox is made of Acrylonitrile Butadiene Styrene (ABS), and the shell is a blend of ABS

and polycarbonate. Both materials are UV-stabilised.

This increases the helmet life from the average 4 to 6 years.

10


2016

CRASHBOX PATENTED DOUBLE-WALLEDImpact Absorption System

THE RANGER IS A PREMIUM SAFETY HELMET FOR USE IN A WIDE VARIETY OF APPLICATIONS A wide choice of accessories is also available to allow full customisation (see Pages 28-29)

AVAILABLE COLOURS

Multiple colour combinations of helmet shell and

Crashbox are available.

Our two mostpopular variants

are listed opposite. BADGING SERVICE AVAILABLE - SEE PAGE 30

AWARD- WINNING Ratchet allows for easy adjustment.

Pull out to adjust, push in to lock.

The integrated Crashbox impactabsorption system significantlyreduces the amount of impact

energy passed from the shell tothe wearer.

RANGER

11

COLOUR VENTILATION ADJUSTABILITY MATERIAL WEIGHT

SHELL CRASHBOX

Hi-Viz Hi-tech blend of ABS /Polycarbonate with

UV blocker

375g(407g withIntegraSpec)8 holes Ratchet

Hi-Viz

GENERAL FEATURES

PROTECTION FEATURES

COMFORT FEATURES

A VENTILATION HOLES Allow air to circulate to cool the wearer’s head

A PADDED HEADBAND WITH RATCHET Comfortable and easy to adjust with one hand even when wearing gloves

A SWEATBAND Anti-allergenic, washable. Standard option is made of microfibre for increased wearing comfort. Other options are available.

A ADJUSTABLE SIZING 53-62cm for a perfect fit that will increase wearing comfort and safety for the wearer

A PATENTED OVAL SHAPED SLOTS (30mm) For accessories such as hearing protection and visors. The patented shape of the slots makes them stronger than those on conventional helmets

A SLOT AT THE FRONT OF THE HELMET To affix an LED head light

A HELMET SHELL MATERIAL Acrylonitrile Butadiene Styrene (ABS)/polycarbonate blend with ultraviolet light blocking properties - makes the shell more resistant to sunlight and reduces ageing

A COLOURS Available in multiple colour combinations of helmet shell and Crashbox insert

A ACCESSORIES Wide range of accessories available – see pages 28-29

A WEIGHT 375g (407g with IntegraSpec)

A CRASHBOX The patented, double-walled impact absorption system increases the wearer’s safety as significantly less impact energy is transmitted to the head.

A 6-POINT TEXTILE SUSPENSION HARNESS Spreads the force in the event of an impact and provides optimal fit and comfort by moulding to the wearer’s head

A 4-POINT SELF-RELEASING CHIN-STRAP MOUNTS Ensure the release of the chin-strap when the limit of a pulling force is met to avoid strangulation

A INTEGRASPEC Integrated retractable eye protection (optional) o Can be pushed up into the helmet shell when not needed o Conforms to EN 166 o Eliminates the need to carry safety glasses

UP TO

6 YEARS

IN USE LIFETIME (IF UNDAMAGED)

SPECIFICATIONS ORDER CODES ARE LISTED ON PAGES 32-33

EN 397 ∙ ANSI/ISEA Z89.1-2014 Type 1, Class C PACKAGING: 1 helmet per box ∙ 6 boxes per case

RANGER SERIES

12


2016

UNVENTED SAFETY HELMET WITH CRASHBOXSUITABLE FOR ELECTRICAL WORK Designed to reduce the risk of exposure to high voltage conductors(up to 1000V AC or 1500V DC; EN 50365). A wide choice of accessoriesis also available (see Pages 28-29)

Multiple colour combinations of helmet shell and Crashbox are available.

The popular variant is listed opposite

BADGING SERVICE AVAILABLE - SEE PAGE 30

AWARD- WINNING Ratchet allows for easy

adjustment. Pull out to adjust, push in to lock.

FOR ELECTRICAL APPLICATIONS



E-RANGER

13

RANGER SERIES

GENERAL FEATURES

PROTECTION FEATURES

COMFORT FEATURES

A WITHOUT VENTILATION HOLES Suitable for electrical work

A PATENTED OVAL SHAPED SLOTS (30mm) For accessories such as hearing protection and visors. The patented shape of the slots makes them stronger than those on conventional helmets.

A SLOT AT THE FRONT OF THE HELMET To affix an LED head light

A HELMET SHELL MATERIAL Acrylonitrile Butadiene Styrene (ABS)/polycarbonate blend with ultraviolet light blocking properties - makes the shell more resistant to sunlight and reduces ageing

A COLOURS Available in multiple colour combinations of helmet shell and Crashbox insert

A ACCESSORIES Wide range of accessories (metal-free) available – see pages 28-29

A WEIGHT 375g (407g with IntegraSpec)


A SWEATBAND Anti-allergenic, washable. Standard option is made of microfibre for increased wearing comfort. Other options are available.


A CRASHBOX The patented, double-walled impact absorption system increases the wearer’s safety as significantly less impact energy is transmitted to the head.



A INTEGRASPEC Integrated retractable eye protection (optional) o Can be pushed up into the helmet shell when not needed o Conforms to EN 166 o Eliminates the need to carry safety glasses

A MOLTEN METAL RESISTANT (MM)

UP TO

6 YEARS



COLOUR ELECTRICAL INSULATION*

440V AC (EN 397) 1000V AC / 1500V DC

(EN 50365) 10000V disruptive discharge voltage

(EN 50365)

VENTILATION ADJUSTABILITY MATERIAL WEIGHT SHELL CRASHBOX

Hi-tech blend of ABS /

Polycarbonate with UV blocker

375g (407g with

IntegraSpec) None Ratchet

* Working under high voltage or near high voltage devices of up to 1000V AC or 1500V DC requires the use of personal protective equipment to protect the neck, hands and other parts of the body against electrical hazards.

EN 397 ∙ EN 50365 ∙ MM (Molten Metal) PACKAGING: 1 helmet per box ∙ 6 boxes per case

14

EXCELLENT IMPACT ABSORPTION RATES

Tested from -30°C to +50°C

HELMETS Helmets in the Rockman series feature an array of options and features to satisfy a wide range of applications. Not only are they award-winning, but each hard hat exceeds the demands of EN 397. There is also a range of specialist Rockman solutions available for those working in engineering and metal working environments where risks include excessive heat, light and molten metal. These are joined by a range specifically designed for forestry workers which includes sets that combine head, eye, face and hearing protection (see pages 24-25).

Starting at just over 300g, Rockman helmets are extremely comfortable and they fit securely to give the wearer a confident wearing experience. Available in several colour options and with many accessories, we are confident you will find a Rockman helmet that’s the perfect fit for your workforce

SELF-RELEASING CHIN-STRAP MOUNTS

Self-releasing hooks integrated into the headband allow the chin-strap to be released automatically

should the helmet be forcibly removed from the head

15

THE PERFECT FIT FOR YOUR WORKFORCE

ROCKMAN SERIES 3

ROCKMAN SERIES 4

ROCKMAN SERIES 6

See pages 16-17 See pages 18-19 See pages 20-23

EASY TO ADJUST RATCHET

Many Rockman helmets are available with a ratchet system that allows wearers to easily adjust the helmet

using a single hand – even when wearing a safety glove

SCRATCH-RESISTANT

Matt finish to the top of the helmet protects the helmet surface when stored upside down

• 6-point textile suspension harness • Includes an option for electrical workers and for protecting against

heat and molten metal (TE6)

• 4-point textile suspension harness • Includes an option for electrical workers

• 6-point plastic suspension harness • Ideal for site visitors

16

ROCKMAN SERIES 3

6-point plastic suspension harness

AWARD- WINNING

C3 with optional ear defenders

THE ROCKMAN SERIES 3 IS OFTEN CHOSEN AS A HELMET FOR SITE VISITORS It is available with a pinlock headband adjustment system and a 6-point plastic suspension harness.

AVAILABLE COLOURS

There is a choice of 6 colours. You can customise your Rockman Series 3 helmet by adding accessories from a wide range (see pages 28-29).

BADGING SERVICE AVAILABLE - SEE PAGE 30 White Yellow Orange Red Blue Green

C3

17

MODEL COLOUR MATERIAL VENTILATION ADJUSTABILITY WEIGHT

Polyethylene 12 holes Pinlock 325g

ROCKM

AN SERIES 3

PROTECTION FEATURES

COMFORT FEATURES

A VENTILATION HOLES Allow air to circulate to cool the wearer’s head

A PLASTIC SWEATBAND Economical and comfortable


A 6-POINT PLASTIC SUSPENSION HARNESS Spreads the force in the event of an impact and provides optimal fit and comfort by moulding to the wearer’s head


A NECK PROTECTION Increased rear shell design provides enhanced nape protection

A MATT HELMET TOP To avoid scratch marks

A SHELL MATERIAL Made of virgin granulate polyethylene, UV-stabilised which makes the shell more resistant to sunlight and reduces ageing

A RAIN GUTTER Collects rain water running off the helmet shell

A SIDE SLOTS (30mm) For accessories such as hearing protection and visors

A COLOURS Up to 6 colour options available

A IN-USE LIFETIME Up to 4 years (if undamaged)

PACKAGING: 1 helmet per plastic bag ∙ 30 helmets per case EN 397

GENERAL FEATURES


18

ROCKMAN SERIES 4

4-point textile suspension harness

E4 with optional visor

ROCKMAN SERIES 4 FEATURES HELMETS SUITABLE FOR CONSTRUCTION, FORESTRY, ELECTRICAL AND GENERAL USE Models have a 4-point suspension harness and are available with a pinlock headband closure system or ratchet.


AVAILABLE COLOURS

There is a choice of up to 6 colours. You can also customise your Rockman Series 4 helmet by adding accessories from a wide range (see pages 28-29).

White Yellow Orange Red Blue Green

AWARD- WINNING

C4 -

F4 -

E4

19

ELECTRICAL INSULATION* MODEL COLOUR VENTILATION ADJUSTABILITY MATERIAL WEIGHT

FOR CONSTRUCTION AND GENERAL

USE

Polyethylene 305g 12 holes Pinlock / Ratchet

ABS 315g

Polyethylene 296g FOR USE IN FORESTRY /

ARBORICULTURE 20 holes Pinlock / Ratchet

ABS 300g

440V AC (EN 397)

1000V AC (EN 50365)

Polyethylene 308g SUITABLE FOR USE BY

ELECTRICIANS None Pinlock / Ratchet

ABS 328g

ROCKM

AN SERIES 4

PROTECTION FEATURES

COMFORT FEATURES

A VENTILATION HOLES Allow air to circulate to cool the wearer’s head (model specific - see table)

A FLEECE SWEATBAND As standard for increased wearing comfort




A NECK PROTECTION Increased rear shell design provides better nape protection

A E4 / E4A MODELS Electrical insulation of up to 1000V AC in line with EN 50365


A SHELL MATERIAL Made of virgin granulate UV-stabilised polyethylene or Acrylonitrile Butadiene Styrene (ABS) (model specific - see table), ABS being a more resistant material thanks to its higher density





PACKAGING: 1 helmet per plastic bag 30 helmets per case (pinlock) / 25 helmets per case (ratchet)

EN 397 ∙ EN 50365 (E4 helmets) ∙ ANSI Z89.1-2014 (E4 helmets)

GENERAL FEATURES


* Working under high voltage or near high voltage devices of up to 1000V AC or 1500V DC requires the use of personal protective equipment to protect the

neck, hands and other parts of the body against electrical hazards.

20

ROCKMAN SERIES 6


Ratchet allows for easy adjustment. Pull out to adjust, push in to lock.

ROCKMAN SERIES 6 FEATURES HELMETS SUITABLE FOR CONSTRUCTION, FORESTRY, ELECTRICAL AND GENERAL USE Models have a 6-point suspension harness and are available with a pinlock headband closure system or ratchet.


AVAILABLE COLOURS

There is a choice of 6 colours. You can also customise your Rockman Series 6 helmet by adding accessories from a wide range (see pages 28-29).

White Yellow Orange Red Blue Green

AWARD- WINNING

C6

F6

E6

21

-

-

MODEL COLOUR VENTILATION ADJUSTABILITY MATERIAL WEIGHT

FOR CONSTRUCTION AND GENERAL

USE

Polyethylene 315g

325g Pinlock / Ratchet 12 holes

ABS

Polyethylene 310g

325g

FOR USE IN FORESTRY /

ARBORICULTURE Pinlock / Ratchet 20 holes

ABS

440V AC (EN 397) 1000V AC (EN 50365)

Polyethylene 320g Pinlock / Ratchet

SUITABLE FOR ELECTRICAL USE None

ABS 330g

ROCKM

AN SERIES 6

PROTECTION FEATURES

COMFORT FEATURES

A VENTILATION HOLES Allow air to circulate to cool the wearer’s head (model specific - see table)






A E6 / E6A MODELS Electrical insulation of up to 1000V AC in line with EN 50365


A SHELL MATERIAL Made of virgin granulate UV-stabilised polyethylene or Acrylonitrile Butadiene Styrene (ABS) (model specific - see table), ABS being a more resistant material thanks to its higher density





PACKAGING: 1 helmet per plastic bag 30 helmets per case (pinlock) / 25 helmets per case (ratchet)

EN 397 ∙ EN 50365 (E6 helmets)

ANSI Z89.1-2014 (E6 helmets)

ANSI Z89.1-2003 (C6A / C6AR helmets)

GENERAL FEATURES


ELECTRICAL INSULATION*

* Working under high voltage or near high voltage devices of up to 1000V AC or 1500V DC requires the use of personal protective equipment to protect the

neck, hands and other parts of the body against electrical hazards.

22

ROCKMAN TE6 FOR ELECTRICAL AND HOT METAL APPLICATIONS


There is a choice of 3 colours. You can also customise your Rockman TE helmet by adding accessories from a wide range (see pages 28-29).

AVAILABLE COLOURS THE ROCKMAN TE HELMETS

ARE SUITABLE FOR WORK IN THE HOT METAL INDUSTRY AND FOR ELECTRICAL WORK They are tested to be Molten Metal (MM) resistant and have a 6-point suspension harness. Each is available with either a pinlock headband system or ratchet.

White Yellow Red

AWARD- WINNING


TE6 with optional visor

23

ELECTRICAL INSULATION* COLOUR VENTILATION ADJUSTABILITY MATERIAL WEIGHT

440V AC (EN 397) 1000V AC / 1500V DC

(EN 50365) 10000V disruptive discharge

voltage (EN 50365) Up to 10kA / 1.0 sec

FOR HOT METAL INDUSTRY AND

ELECTRICAL WORK

Glass fibre & Polycarbonate None Pinlock / Ratchet 385g

ROCKM

AN SERIES 6

GENERAL FEATURES

PROTECTION FEATURES

COMFORT FEATURES

A UNVENTED Suitable for electrical work and hot metal applications


A SHELL MATERIAL Made of polycarbonate/glass fibre for increased heat resistance



A COLOURS 3 colour options available




A HEAT RESISTANT Up to +150°C

A MOLTEN METAL RESISTANT (MM)



UP TO

10 YEARS


PACKAGING: 1 helmet per plastic bag

30 helmets per case (pinlock) / 25 helmets per case (ratchet)

EN 397 ∙ EN 50365 ANSI/ISEA Z89.1-2009 Type 1 Class C+E MM (Molten Metal)


* Working under high voltage or near high voltage devices of up to 1000V AC or 1500V DC requires the use of personal protective equipment to protect the neck,

hands and other parts of the body against electrical hazards.

24

FORESTRY COMBINATIONS


FOR CONVENIENCE AND VALUE A SELECTION OF SAFETY HELMET AND ACCESSORY SETS ARE AVAILABLE

These have been specifically produced to meet the needs of professionals working in the forestry, arboriculture, utilities and rail industries.

Each contains a set of high quality personal protective equipment accessories that integrate robustly with the Rockman F6 helmet. The result is outstanding comfort and a balanced wearing experience even when worn over long periods.


25

FORESTERY CO

MBIN

ATION

S

PRODUCT REFERENCE CONSISTS OF

F6 Rockman helmet (see page 21)

3017 ‘Shot’ Helmet mounted ear defenders (plastic arm system, 30mm slot)

4300B Visor carrier ∙ 4100W Wire mesh visor

2706FW

F6 Rockman helmet (see page 21)

3017 ‘Shot’ Helmet mounted ear defenders (plastic arm system, 30mm slot)

4300BP Visor carrier with peak ∙ 4100W Wire mesh visor ∙ IntegraSpec retractable eye protection 2706FPDWI

PRODUCT REFERENCE PRODUCT

4100N Visor Nylon mesh visor

4100W Visor Wire mesh visor

Visor carrier without slot mounts can be used only with ENHA helmet mounted hearing protectors 3015, 3016, 3017

Visor carrier without slot mounts with sun visor

4300B Visor Carrier

4300BP Visor Carrier

3017 ‘Shot’ Helmet mounted ear defenders, plastic arm system, 30mm slot

9270 Neck Protector Neck protector, reflective orange

4100NS Mesh Visor Nylon mesh visor with textile chin protector

Alternatively, select any of the following accessories and combine with one of the Rockman helmets as shown on pages 16-21 to form your own bespoke combination.

26

E-MAN

ELECTRICAL SAFETY HELMETS WITH FULLYRETRACTABLE VISOR AND CRASHBOX –FOR PROTECTION FROM ELECTRICAL ARCFLASH UP TO 7kA The award-winning E-MAN is a high-quality helmet with a moderndesign that protects against short-term accidental contact withelectrical conductors. For extra protection against impacts, theE-MAN range also features ENHA’s patented Crashbox. E-MAN is alsoequipped with a fully retractable visor that protects the entire face.


AWARD- WINNING

E-MAN 7000 model

E-MAN 4000



Other colour combinations of shelland Crashbox are available.

Contact us for more information(see back page)

ARC FLASH PROTECTIONUP TO 7kA / 0.5 SEC

AVAILABLE COLOURS

27

THIS SPECIALIST HARD HAT FOR THOSE WORKING IN HIGH-RISK ELECTRICAL APPLICATIONS IS AVAILABLE IN TWO VARIANTS – EACH OFFERING A DIFFERENT DEGREE OF ARC FLASH PROTECTION:

A E-MAN 4000 - Protects against electrostatic discharge - electrical arc up to 4kA / 0.5 sec A E-MAN 7000 - Protects against electrostatic discharge - electrical arc up to 7kA / 0.5 sec

Always wear appropriate personal protective equipment including a full-hood balaclava when working near high voltage devices.

E-MAN

PROTECTION FEATURES

COMFORT FEATURES


A ADJUSTABLE SIZING 53-62cm for a perfect fi t that will increase wearing comfort and safety for the wearer


A CRASHBOX The patented, double-walled impact absorption system increases the wearer’s safety as significantly less impact energy is transmitted to the head



A INTEGRATED, FULLY RETRACTABLE FACE VISOR Made of high-quality polycarbonate and protects the entire face: clear (E-MAN 4000), tinted green (E-MAN 7000), with anti-fog and anti-scratch properties

A UNVENTED Suitable for electrical work

A SHELL MATERIAL Made of UV-stabilised Acrylonitrile Butadiene Styrene (ABS) being a very resistant material thanks to its high density

A SIDE SLOTS (30mm) For accessories such as hearing protection


A ACCESSORIES Wide range of accessories available – see pages 28-29

A COLOURS Several colour combinations of helmet shell and Crashbox insert available

COLOUR ELECTRIC ARC CLASS

VISOR

ELECTRICAL INSULATION

HELMET MODEL ADJUSTABILITY WEIGHT

SHELL CRASHBOX VISOR

1 Up to 4kA /

0.5 sec 440V AC (EN 397)

1000V AC / 1500V DC (EN 50365)

10000V disruptive discharge voltage

(EN 50365)

E-MAN 4000

Ratchet 852g 2

Up to 7kA / 0.5 sec

Hi-Viz E-MAN 7000

Hi-Viz

Visor only: EN 166, EN 170, MM (Molten Metal) Medium Impact (B = steel ball 6mm with 432km/h)) Electric arc (8) • UV Protection (2-1,2) • Anti-fog (N) • Anti-scratch (K) • 3 liquid splash ANSI/ISEA Z89.1-2009 Type 1 Class C

GENERAL FEATURES


EN 397 ∙ EN 50365 ∙ VDE Approved (E-Man 4000) PACKAGING: 1 helmet per box 6 boxes per case

28

ACCESSORIES THE ENHA HELMET RANGE IS COMPATIBLE WITH A WIDE CHOICE OF ACCESSORIES AND SPARE PARTS TO RE-ORDER. By choosing add-ons, your Ranger or Rockman helmet can become a specialist helmet for the respective industry such as he forestry or electrical industry. Depending on the workplace additional protective equipment such as eye and hearing protection or enhanced visibility may be required. ENHA offers a variety of such accessories for you to choose from.

INTEGRASPEC A unique accessory for the Ranger and Rockman helmets is the integrated retractable eye protection feature IntegraSpec. This can be fully folded away into the helmet shell if not needed and eliminates the need to carry a pair of safety glasses.

IntegraSpec is lightweight at 32g and available in clear and tinted lens options.

VISIBILITY For enhanced visibility ENHA offers a tailor-made set of reflective stickers that fit the Ranger / E-Ranger helmet shell perfectly.

Markings on the helmet casing accommodate the stickers precisely. Workers operating in dark and poorly-lit environments will be seen a lot easier with these applied.

CHIN-STRAPS The helmets feature self-releasing chin-

strap mounts (except for the Rockman C3) as an additional safety feature. The chin-strap will

come off when subjected to an excessive force to avoid strangulation.

Chin-strap 9257 features a fast-click magnet fastener which closes effortlessly by the magnets snapping

together easily. It can also be operated with one hand.

29

• • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

• • • • • • • • • • • • • • • •

• • • • • •

• • • • • • • •

• • • • • • • • •

• • • • • •

• • • • •

• • • • • •

• • • • • • • •

• • • • • • • • • •

• • • • • • • • • • • • •

• • • • • • • • • • • • • •

• • • • • •

• • • • • • •

• • • • • •

• • • • • • • • • •

• • • • •

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

• • • • • • • • •

• •

RAN

GER

E-RA

NGE

R E-

MAN

400

0 E-

MAN

700

0 RO

CKM

AN C

3 RO

CKM

AN C

4 RO

CKM

AN F

4 RO

CKM

AN E

4 RO

CKM

AN C

6 RO

CKM

AN F

6 RO

CKM

AN E

6 RO

CKM

AN T

E6

TYPE ORDER CODE DESCRIPTION

• • • • • • • • • • • • 9256 Chin-strap, textile band, 20mm, 4-point

Chin-strap, textile band, 20mm, fast-click ratchet, 4-point

Sweatband, long, black, with foamed material

Sweatband, Eladon, black

Standard fleece sweatband

Sweatband, terry cloth

Sweatband, ventilated

IntegraSpec retractable spectacle, PC, clear

IntegraSpec, polycarbonate, tinted, anti-scratch

Nylon mesh visor

Nylon mesh visor with textile chin protector

Wire mesh visor

Polycarbonate, clear, 1.5mm, anti-fog (inside) + anti-scratch (outside) coating, 4kA, Class 1

Polycarbonate, clear, 1.0mm

Polycarbonate, clear, 1.5mm, 4kA, Class 1

Polycarbonate, green, 1.5mm, anti-fog (inside) + anti-scratch (outside) coating, 7kA Class 2, 12 cal

Polycarbonate, green, 1.5mm, anti-fog (inside) + anti-scratch (outside) coating, 7kA Class 2, 6 cal

PC, clear, 1.0mm, anti-fog (inside) + anti-scratch (outside) coating







Nomex balaclava hood

Visor carrier with mounts for 30mm helmet slots

Visor carrier for electricians helmets (4kA Class 1 and 7kA Class 2)

Visor carrier with mounts for 30mm helmet slots and sun visor

Visor carrier without slot mounts can be used only with ENHA helmet mounted hearing protectors 3015, 3016, 3017

Visor carrier without slot mounts with sun visor

Universal visor carrier with elasticated rubber band

Visor carrier for Electrician (4kA Class 1 and 7kA Class 2)

Plastic harness 6-point

Textile harness 4-point




SHOT, helmet mounted hearing protector, stainless steel wire, 30mm Slot

JET, helmet mounted hearing protector, stainless steel wire, 30mm Slot

SHOT, helmet mounted hearing protector, plastic arm system, 30mm Slot

Nape protector, reflective orange

Nape protector, leather

22 piece reflectors set (yellow)

7 piece reflectors set (white)

Chin- straps • • • • • • • • • • • • 9257

• • 9226L

• • • • • • • • • 9220S

• • • • • • • • • • Comfort 9221S

• • • • • • • • • • • • 9224S

• • 9225S

• • • • • • • 21415PC

• • • • • • • 21415PCT

• • 4100N

• • 4100NS

• • 4100W

• • • 4201AC1.5

• • • • • 4201PC1.0

• • • 4201PC1.5

• • • 4202AC1.5Face

• • • 4202PC15PA

• • • 4206AC1.0

• • • 4206AC1.5

• • 4206PC1.0

• • • 4206PC1.5

• • • 4208AC1.0

• • • 4208PC1.0

• • • 4208PC1.5

• • • • • 9289

• • • • • • 4300A

• • • • 4300AE

• • • • • • 4300AP

Visor Carriers • • • • • • • 4300B

• • 4300BP

• • • • • • • • • • • • 4300C

• • • • • 4300CE

• 2003

• • • 2004

• • • • 2006Harness

• • 2006LDEM

• • • • 2006LDRA

• • • • • 3015

• • • • • Hearing

• • • • • • • • • • • • 3017

• • • • 9270Neck • • • • • 9271

• • 22RAREFL0LGE

• • 2REFLEKTORWSVisibility

ACCESSORIES

3016

30

BADGING The majority of ENHA helmets are available with customised badging. This allows your workforce to wear safety helmets featuring your own company’s branding and identity.

Ranger / E-Ranger Series These helmets can be branded with a logo positioned on the sides of the helmet shell. The maximum printing area is 50x28mm.

Rockman Series Rockman helmets allow additional options for badging: On the helmet’s sides (60x40mm) as well as on the front and back.

Bespoke design

We have all the expertise and equipment to off er you your own bespoke helmet with regards to the shell colour and design.

Should you want a camouflage, raindrop, marble design, or even an extraordinary colour such as bright pink, we will be able to manufacture it for you.

For a logo to be displayed on the hard hat there are two options: print or stickers. Minimum quantities may apply, please send your enquiry to [email protected]

Please note: minimum order quantities may apply to helmets with bespoke design. Helmets with bespoke design have not been tested and certified to conform with any EN standards due to the individual design. For further information please contact us via [email protected]

BESPOKE DESIGN SERVICE AND

31

Please contact us for further information about these standards. (See back page)

GUIDE TO EUROPEAN STANDARDS HEAD PROTECTION EN 397

EN 397 specifies physical and performance requirements of industrial safety helmets. Helmets certified to EN 397 must meet the following requirements:

A Shock absorption

A Resistance to penetration

A Flame resistance

A Chin-strap anchorage – chin-strap releases at minimum 150N and maximum 250N

In accordance with EN 397, an industrial safety helmet may also meet the following optional requirements:

A Very low temperatures (-20 °C or -30 °C)

A Very high temperatures (+150 °C)

A Electrical insulation (440V AC)

A Molten metal (MM)

A Lateral deformation (LD)

EN 50365

EN 50365 specifies the requirements for protecting against electric shocks and preventing electric current from passing through to the head when using on low voltage installations. Helmets certified to EN 50365 must meet the following requirements: A All helmets must meet the requirements in accordance with EN 397

A Protection against alternating voltage of up to 1000V (AC) or direct voltage up to 1500V (DC)

A Insulating helmets must not contain any conductive parts. Ventilation holes (if available) must not allow any accidental contact with live parts

EYE PROTECTION

The common applicable standards relating to eye protection are as follows:

A EN 166 SPECIFICATIONS

A EN 167 OPTICAL TEST METHODS

A EN 168 TEST METHODS OTHER THAN OPTICAL

A EN 169 WELDING FILTERS

A EN 170 ULTRAVIOLET FILTERS

A EN 171 INFRARED FILTERS

32

HELMET ORDERING CODES ORDER CODE DESCRIPTION HELMET SHELL

COLOURCRASHBOX

COLOUR VENTILATION SUSPENSION HARNESS FASTENING

22RABC101000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC122000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC121000 Construction / Forestry Hi-Viz 8 Holes 6-Point Textile Band Ratchet22RABC111000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC105000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC113000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC215000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC423000 Construction / Forestry Hi-Viz Hi-Viz 8 Holes 6-Point Textile Band Ratchet22RABC214000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC205000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC134000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC104000 Construction / Forestry Hi-Viz 8 Holes 6-Point Textile Band Ratchet22RABC118000 Construction / Forestry Hi-Viz Hi-Viz 8 Holes 6-Point Textile Band Ratchet22RABC108000 Construction / Forestry Hi-Viz 8 Holes 6-Point Textile Band Ratchet22RABC209000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC114000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC110000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC102000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC106000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC116000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC131000 Construction / Forestry 8 Holes 6-Point Textile Band Ratchet22RABC111100 Construction / Forestry Hi-Viz 8 Holes 6-Point Textile Band Ratchet22RABE101000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE122000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE121000 E-Ranger for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22RABE111000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE105000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE113000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE115000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE104000 E-Ranger for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22RABE129000 E-Ranger for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22RABE118000 E-Ranger for Electrical Work Hi-Viz Hi-Viz None 6-Point Textile Band Ratchet22RABE108000 E-Ranger for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22RABE125000 E-Ranger for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22RABE109000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE214000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE110000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE102000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE116000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE132000 E-Ranger for Electrical Work None 6-Point Textile Band Ratchet22RABE128000 E-Ranger for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22EMA1101100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1111100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1113100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1115100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1103100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1119100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1107100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1104000 E-MAN 4000 with Visor and Chin-strap, for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22EMA1108500 E-MAN 4000 with Visor and Chin-strap, for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet22EMA1109000 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1114100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1102100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1121100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet22EMA1116100 E-MAN 4000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5101100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5113100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5103100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5119100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5107100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5104100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet27EMA5108100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work Hi-Viz None 6-Point Textile Band Ratchet27EMA5114100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet27EMA5121100 E-MAN 7000 with Visor and Chin-strap, for Electrical Work None 6-Point Textile Band Ratchet

PACKAGING: 1 helmet per box ∙ 6 boxes per case

C3

PE

PE

ABS

C4

PE

ABS

PE

ABS

E4

PE

ABS

PE - - -

ABS - - -

F4

PE - - -

ABS - - -

PE

ABS

C6

PE

ABS

PE

ABS

E6

PE

ABS

PE - -

ABS - - -

F6

PE - - -

ABS - - -

- - -

TE6

- - -

33

FOR ACCESSORY CODES SEE PAGE 29

COLOUR

MATERIAL FASTENING

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Pinlock

Ratchet

Ratchet

Polycarbonate / glass fibre

Polycarbonate /glass fibre

PACKAGING: 1 helmet per plastic bag • 30 helmets per carton (pinlock) / 25 helmets per carton (ratchet)

ROCKMAN

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

Ratchet

2C3000WS0000

2C4000WE0000

2C4A00WS0000

2C40D0WS0000

2C4AD0WS0000

2E4000WE0000

2E4A00WS0000

2E40D0WS0000

2E4AD0WS0000

2C6000WE0000

2C6A00WS0000

2C60D0WS0000

2C6AD0WS0000

2E6000WE0000 2E6000GE0000

2E6A00WS0000 2E6A00GE0000

2E60D0WS0000 2E60D0GE0000

2E6AD0WE0000 2E6AD0GE0000

2F6000GE0000

2F6A00GE0000

2F60D0GE0000

2F6AD0GE0000

2T6000WS0000 2T6000GE0000

2T60D0WS0000 2T60D0GE0000

2C3000GE0000 2C3000OR0000 2C3000RT0000 2C3000BL0000 2C3000GR0000


2C4A00GE0000 2C4A00OR0000 2C4A00RT0000 2C4A00BL0000 2C4A00GR0000

2C40D0GE0000 2C40D0OR0000 2C40D0RT0000 2C40D0BL0000 2C40D0GR0000

2C4AD0GE0000 2C4AD0OR0000 2C4AD0RT0000 2C4AD0BL0000 2C4AD0GR0000

2E4000GE0000 2E4000OR0000 2E4000RT0000 2E4000BL0000 2E4000GR0000

2E4A00GE0000 2E4A00OR0000 2E4A00RT0000 2E4A00BL0000 2E4A00GR0000

2E40D0GE0000 2E40D0OR0000 2E40D0RT0000 2E40D0BL0000 2E40D0GR0000

2E4AD0GE0000 2E4AD0OR0000 2E4AD0RT0000 2E4AD0BL0000 2E4AD0GR0000

2F4000GE0000 2F4000OR0000 2F4000RT0000

2F4A00GE0000 2F4A00OR0000 2F4A00RT0000

2F40D0GE0000 2F40D0OR0000 2F40D0RT0000

2F4AD0GE0000 2F4AD0OR0000 2F4AD0RT0000


2C6A00GE0000 2C6A00OR0000 2C6A00RT0000 2C6A00BL0000 2C6A00GR0000

2C60D0GE0000 2C60D0OR0000 2C60D0RT0000 2C60D0BL0000 2C60D0GR0000

2C6AD0GE0000 2C6AD0OR0000 2C6AD0RT0000 2C6AD0BL0000 2C6AD0GR0000

2E6000OR0000 2E6000RT0000 2E6000BL0000 2E6000GR0000

2E6A00OR0000 2E6A00RT0000 2E6A00BL0000 2E6A00GR0000

2E60D0OR0000 2E60D0RT0000 2E60D0BL0000 2E60D0GR0000

2E6AD0OR0000 2E6AD0RT0000 2E6AD0BL0000 2E6AD0GR0000

2F6000OR0000 2F6000RT0000

2F6A00OR0000 2F6A00RT0000

2F60D0OR0000 2F60D0RT0000

2F6AD0OR0000 2F6AD0RT0000

2T6000RT0000

2T60D0RT0000

GROUP

34

www.showagloves.com

www.skytecgloves.com

www.haikagloves.com

ENHA is part of Globus Group, world leaders in protecting people. Globus

Group’s other brands of Personal Protective Equipment (PPE) and

healthcare protective products include:

SHOWA gloves are synonymous with the highest degree of hand protection and innovation.

Technological expertise and 58 patents have contributed to a pioneering glove portfolio

manufactured to exceptional standards.

SKYTEC gloves deliver advanced hand protection solutions for wearers in many different industries.

Performance and quality are intrinsic values of a broad and innovative glove range that delivers

exceptional value and customer satisfaction.

The specialist HAIKA brand represents hand protection solutions for the

healthcare environment.

It includes a comprehensive, powder-free product portfolio to support hand protection

needs ranging from specialist sterile surgical to non-sterile examination gloves.

www.alphasolway.com www.riley-eyewear.com

35

Created by a team of safety eyewear experts with decades of experience, Riley® represents a completely fresh and uncomplicated approach to eye protection. Each model in the Riley® portfolio is engineered using the latest safety eyewear technology and incorporates innovative designs and unique performance features.

It also includes a full prescription range, each manufactured in Riley’s UK prescription laboratory to ensure a dedicated and responsive service.

Alpha Solway is a manufacturer of world class above-the-neck personal protective equipment and protective clothing. Its expertise, commitment and investment in product development has led to the introduction of many innovative products. Each is designed for rapid wearer acceptance and to keep people comfortable as well as safe in hazardous working environments.

UK AND IRELAND

Alpha Solway Factory 1, Queensberry Street Annan Dumfriesshire DG12 5BL United Kingdom

Tel: +44 (0)1461 202 452 Fax: +44 (0)1461 205 684 Email: [email protected]

www.alphasolway.com

EUROPE

ENHA GmbH Kasteler Str. 11 66620 Nonnweiler Germany Tel: +49 (0)6873 91067 Fax: +49 (0)6873 91069Email: [email protected]

www.enha.com

REST OF WORLD

Globus EMEAUA03 831st Street Jebel Ali Dubai United Arab Emirates Tel: +971 4 882 9962Fax: +971 4 882 9963Email: [email protected]

www.globusgroup.com/gcc

© 2018 Globus (Shetland) Ltd | ENHA-CAT-HP_R-0618

ahead with innovation · en 397 ∙ ansi/isea z89.1-2014 type 1, class c packaging: 1 helmet per...

Documents