air blow gun barrel length - meccanocar · • air connection bayonet. mastic gun spraying and tang...

Electric and pneumatic tools

9

Pneumatic tools

Air blow gun

Code Desc.3450001298 1150

• Model nylon. • Air connection 1/4 female gas.

Air blow gun barrel length

Code Desc.3450001410 1153

• Model nylon. • Barrel length 20 cm. • Air connection 1/4 female gas.

Air blow gun

Code Desc.3450001300 1151

• Aluminum model. • Air connection Bayonet.

Air blow gun barrel length

Code Desc.3450001400 1152

• Aluminum model. • Barrel length 20 cm. • Air connection Bayonet.

1092


9

Pneumatic tools

Blow gun barrel curve

Code Desc.3450001570 1165

• Gun resin. • Rod curve brass. • Barrel length 110 mm. • Air connection 1/4 female gas.

Blow gun with protection

Code Desc.3450001560 1163

• Gun resin. • Curve cane with rubber protection scratch resistant. • Barrel length 110 mm. • Air connection Bayonet.

Blow gun extra-long barrel

Code Desc.3450001555 1162

• Gun resin. • Barrel length 300 mm. • Air connection 1/4 female gas.

Mini compressed air blower

Code Description3450001579 1169-Mini compressed air blower

• Practical, reduced dimension compressed air blower • Supplied with Germania series attachment already mounted • Air attachment - Gas ¼” F • The turbo nozzle dispenses an excellent air flow • Materials: thermoplastic and metal

1093


9

Pneumatic tools

Air kit over the counter

Code Desc.3450008220 252

• The kit includes: blowing gun nylon already connected to the spiralpolyurethane ø 8x5 4 m long.

• Air connection to the spiral = 1/4 gas female.

Gun cleaning units

Code Desc.3450001505 1156

• Aluminum gun with tank painted steel adjustable jet. • Air connection Bayonet. • Screw tank capacity 1000 cc. • Suitable for any type of liquid.

Gun cleaning units

Code Desc.3450001510 1157

• Gun with aluminum tank adjustable jet. • Air connection Bayonet. • Tank with quick coupling. • Fuel tank capacity 1000 cc. • Suitable for any type of liquid.

sandblasting gun

Code Description3450003800 5999 - Complete gun345RC3170 317 - Nozzle Replacement

• Body: nickel-plated brass. • Nozzle: casehardened steel ø 6 mm. • Dip tube: 2 m, ø 16x22. • Working pressure: 5-8 bar. • Air connection Bayonet. • Gun suitable for cleaning, scraping, removal of rust, paint and dirt

resistant. Ideal for the preparation of materials such as wood, steel,aluminum, plastic etc. Used in various sectors: bodywork, industry,carpentry.

1094


9

Pneumatic tools

Caulking gun cartridges

Code Desc.3450001540 1160

• Pneumatic gun for the application of silicones, sealants and puttiesin cartridge.

• Length cartridges: min. 192 mm max 225 mm. • ø cartridges: min. 44 mm max 50 mm. • Supplied with 3 nozzles of different forms. • Air connection Bayonet.

Code Desc.4430055260 1146

• Thrust pad in plastic. Internal diameter 51 mm. Central hole for hexagon nut of8 mm.

• Spare parts for guns for sealants in bags.

Thrust buffer for pipe guns

Gun for protection

Code Desc.3450001420 1154

• Gun for applying monocomponent soundproofing protectivepolyurethane bases.

• Ideal for protective wax. • To use with pre-packaged products in milk 1l, you screw thread

European. • Equipped with tube length 600 mm with special nozzle to spray in

closed parts. • Air connection Bayonet.

Gun Kit with nozze

Code Desc.3450003905 6001

• Kit for the application pneumatic of protective wax and soundproof, internaland external.

• Use with products packed in cans l1, with screw thread and European. • Air gun with bayonet coupling. • The kit includes: 1 pistol; 2 suction tubes; 2 nozzles for milk L1.

1095


9

Pneumatic tools

Nozzle kit parts

Code Description3450003912 6002N3450003910 6002 (old model parts)

• Nozzles and suction tubes parts for our art. cod. 345 00 03905-6001. • Contents: 6 nozzles handgun 6 suction tubes.

Gun for protection

Code Desc.3450003917 6004

• Pneumatic gun for soundproofing treatments and protective. • Suitable for products packed in cans L1 with screw thread for European and

bulk. • Provided with various nozzles and tubes for boxed. • Air connection Bayonet.

Mastic gun spraying and tang

Code Desc.3450003919 6006

• Pneumatic gun for the application of sealants spray shank for thebody.

• Suitable for the use of cartridges from 280/310 ml and produced inthe bag.

• Advancement of the bottom of the cartridge plunger. • Air connection 1/4 male gas.

1096


9

Pneumatic tools

Mini airbrush touch-up

Code Desc. Ø ugello3450001210 333 0.33450001212 555 0.5

• Nickel plated brass body. • Needle and stainless steel nozzle. • Reservoir gravity shiny aluminum. • Fuel tank capacity: 125 cc. • Pressure: 1-3.5 bar. • Air consumption: 30-60 l / min. • Nozzle diameter: 0.3-0.5. • Air connection Bayonet.

Standard airbrush

Code Desc. Serbatoio Ø Ugello mm3450001218 1012 1000 cc 13450001234 1212 1000 cc 1.23450001241 1412 1000 cc 1.43450001700 1712 1000 cc 1.73450002100 1912 1000 cc 1.93450002800 2212 1000 cc 2.23450003200 2512 1000 cc 2.5

• Nickel plated brass body. • Needle and stainless steel nozzle. • Reservoir gravity shiny aluminum. • Pressure: 3-4.5 bar. • Air consumption: 200-350 l / min. • ø nozzle: 1-1.2-1.4-1.7-1.9-2.2-2.5. • Air connection Bayonet. • Airbrushes with tank 1000 cc. • Airbrush suitable for all painting requirements, a wide range of nozzles and

reservoir gravity: 1000 cc.

Code Desc. Ø Ugello mm345RC01060 144550-4-1.4 1.4345RC01100 144959-4-2.2 2.2

• The kit includes: needle; nozzle; hat.

Replacement Kit for standard spray guns

1097


9

Pneumatic tools

Airbrush super

Code Desc. Ø Ugello mm3450001225 1201 1.23450001239 1401 1.43450001250 1701 1.73450001900 1901 1.93450002600 2201 2.23450003000 2501 2.5

• Nickel plated brass body. • Needle and stainless steel nozzle. • Tank suction polished aluminum capacity 1000 cc. • Closing tank bayonet. • Pressure: 3-4.5 bar. • Air consumption: 200-350 l / min .. • ø nozzle: 1.2-1.4-1.7-1.9-2.2-2.5. • Air connection Bayonet. • Conventional airbrush suitable for various painting requirements, a wide

range of nozzles and suction tank.

Code Desc. Ø Ugello mm345RC00580 139459-2-1.4 1.4345RC00590 139556-2-1.7 1.7345RC00600 139653-2-1.9 1.9345RC00630 139955-2-2.5 2.5

• The kit includes: needle; nozzle; hat.

Kit parts for airbrushes super

Code Desc. Content345RC00510 136174-2 Seal tank 5 pcs.

Gasket Set, 5 pieces, for tank bayonet

1098


9

Pneumatic tools

Special airbrush

Code Desc. Ø Ugello mm3450001224 1200 1.33450001238 1400 1.53450001249 1700 1.73450001800 1900 1.9

• Professional spray gun. the balance in internal airpassages and hat high pulverization, guarantee a highdegree of atomization in any type of use: from thebodywork industry, the carpentry.

• Aluminum body. • Needle and stainless steel nozzle. • Hat high sputtering nickel plated brass. • Pressure regulator air inlet. • Tank suction polished aluminum, capacity 1000 cc, nylon

filter mesh in 5000, closing the autoclave. • ø nozzle: 1.3-1.5-1.7-1.9-2.2-2.5. • Pressure: 2.5-5 bar. • Air consumption: 150 to 340 l / min. • Air connection Bayonet.

Airbrush to finish "GENESIS S GEO"

Code Desc. Ø Ugello mm3450003920 9000 FXGEO-1,5 1.5345RC04980 917013H 1.3 Kit FXGEO345RC05000 936013 - 1,3 Kit FXGEO "GENESIS"

• Professional spray gun specifically for use in car body,allows to obtain a high degree of finishing with the newtypes of paint product. Thanks to a special nozzle with 6holes, the varnish is pre-atomised inside the same andthen be riatomizzata from the air of the beaks of the hat.This system determines: excellent finishing result,reduction of the smoke from 38% to 67% withconsiderable paint savings and reduced air consumption.

• Hat chemically nickel-plated brass-cally. • Nozzle: Monobloc stainless steel AISI 303 (high

pulverization). • Forged aluminum body anodized. • EC marking with serial no. • Inlet air pressure regulator with gauge. • Hostaform gravity tank, capacity 680 cc. • Pressure: 1.5-2.5 bar. • Air consumption: 200-240 l / min. • Air connection 1/4 male gas. • Nozzle diameter: 1.5.

1099


9

Pneumatic tools

Gun "Bi-Turbo Cleaner"

Code Desc.4180008400 5980

Spare PartsArticle Code Desc.

Horn Blower plastic 418RC00440 61Tube with rings of parts 418RC00450 62With inner tube fitting 418RC00460 63

Seal cap 418RC00470 64Counterweight with suction filter 418RC00480 65

Horn Blower with steel interior for both models Turbo Cleaner and Bi-Turbo Cleaner 418RC00490 66

• Compressed air gun special for the cleaning of each type ofsurface and washable fabric. New model with double trumpetvaporization and aspiration to work faster and more effectively.

• Product suitable for bus, truck drivers, car dealers, car dealershipsand vehicles, marine, upholstery, assembly and maintenancecurtains, outdoor furniture, etc.

• The gun Bi-Turbo Cleaner should be used together with ourdetergent nanotechnology cod. 411 00 17660 and can degrease,clean and sanitize efficiently textiles, fabrics, plastics and anywashable surface. Used with our leather cleaner and imitationleather cod. 411 00 15940-3280 allows deep cleaning of eachcoating prized.

• Gun made of aluminum and composite material with tank andspray nozzle impact plastic. Controller for opening the flow ofdetergent, and for closing the suction of the dirt. Nozzle wallet dirteasily removable for cleaning and rinsing. Air connection inletfemale threaded 1/4 "gas.

• The cleaning system Meccanocar is practical, easy to use, it doesnot provide for efforts by the operator and thoroughly cleans thesurfaces treated. Content: dispensing gun Bi-Turbo Cleaner,detergent tank cap, air clutch series japan.

• Can be used with detergent nanotechnology (4110017660),leather cleaner and imitation leather (4110015940) and sanitizingliquid disinfectant (41100 5950).

• INSTRUCTIONS: Fill the pan detergent and load the compressor 9bar.

• Open the cock in vertical position and spray the detergent on theparts to be treated to approximately 1 cm away from the surface.Leave for a second detergent.

• Move the lever in a horizontal position and wipe the surfacestreated with the usual mode. Clean the nozzle in waterdisassembling or leaving the gun and shaking slightly.

1100


9

Pneumatic tools

Gun “Turbo Cleaner2”

Code Desc.4180007910 5703/2

Spare PartsCode Description Photo

418RC00190 6-Trumpet only white model for 4180007900-5703 1418RC00200 7-tube with connected rings 2418RC00201 7 / A - Tube interior with fitting 3418RC00210 8- transparent tank with cap 4418RC00315 40- tap for detergent 5418RC00480 65 - Counterweight with tube for suction filter 6418RC00640 81- Red Trumpet only for model 4180007910-5703 / 2 8418RC00490 66-Trumpet white with internal steel only for model 4180007900-5703 7

• The rapid cleaning system " Meccanocar TurboCleaner2" allows an intensive cleaning, effective, fastand simple, in a very short time, without operatoreffort and with high results. The offer includes theuse of a particular instrument, the turbo cleaner2gun, which, combined together with our nanotechspecific product allows you to cleanse and cleanvarious surfaces in different applications.

• To special compressed air gun for cleaning any type ofsurface and washable fabric.

• Product suitable for bus, truck drivers, car dealers, cardealerships and V.I, marine, upholstery, curtains,installation and maintenance, outdoor furniture, etc.

• The gun Turbo Cleaner2 should be used together with ourdetergent nanotechnology cod. 411 00 17660 and allows todegrease, cleanse and sanitize efficiently fabrics, fabrics,plastics and any washable surface. Used with our cleanerfor leather and imitation leather cod. 411 00 15940- 3280allows thorough cleaning of each fine coating.

• The version "2" of Turbo Cleaner gun is always constructedentirely of aluminum, with an embossed surface and handlecovered by a rubber protection which ensures insulationfrom cold and vibration damping. Equipped with acontroller for opening the flow of detergent, and for closingof the dirt suction nozzle wallet dirt easily removable forcleaning and rinsing, threaded inlet air attack female 1/4"gas.

• The cleaning system Meccanocar Turbo Cleaner2 and'practical, easy to use, does not require efforts by theoperator and thoroughly cleans the treated surfaces.Contents: Turbo Cleaner2 dispensing gun with 500 ml tank,cap for detergent tank, grafting air japan series.

• Can be used with detergent Nanocleaner (411 00 17660),detergent for leather and artificial leather (411 00 15940)and odor neutralizer (411 00 15950).

• HOW TO USE: • Fill the detergent tray and load the compressor 9 bar

(photo 1). • Open the valve in an upright position and spray the

detergent on the parts to be treated to approximately 1 cmaway from the surface 10. (Photo 2).

• Leave on for a few seconds the detergent. • Move the valve lever in a horizontal position, and wipe the

surfaces treated with the usual mode (Figure 3). • Clean the nozzle by removing it in water or leaving it on

the gun waving and dipping it in a container of water.

1101


9

Pneumatic tools

Trombetta plastic with steel reinforcement

Code Desc.418RC00490 66

“Nano Cleaner” system cleaner for quick cleaning

Code Desc. Content lt4110017660 4460 5

• Nanotechnological detergent for use with turbo gun cleaner. • The product uses nanotechnological particles to obtain a deep cleaning

inside the tissues with low foaming. • Nanocleaner gets great results on all surfaces such as fabric upholstered

seats, carpets, convertible roofs, awnings, etc. .. • Besides a remarkable cleanliness of the fabric surfaces, nanocleaner

brightens colors also releasing a pleasant fragrance. • Nanocleaner can be used pure in the case of very dirty surfaces or diluted

in water in ratio 1 to 2 (1 lt of product in 2 liters of water). Use accordingto the instructions inside the gun cleaner turbo code. 418 00 07800-5702.

1102


9

Pneumatic tools

Impact wrench 1/2 "Mini-7 850 Nm

Code Desc.4180008340 5930

Spare PartsArticle Code Description

Metal ring sealing sleeves 418RC00350 47Complete kit of spare palette 418RC00380 53

• Mini screwdrivers double hammer mechanism, with square drivefor sockets reinforced 1/2 ".

• Suitable for all machine shops, tire shops, body shops, forassembly of metallic carpentry, etc..

• Tools with body in composite material, light and insulated fromthe cold, balanced grip and fatigue-free, small size for working inconfined spaces.

• Powerful motor to 7 blades with maximum torque of 850 Nm,torque control of three positions in the tightening. Maximumspeed of 8200 rev / min, maximum air consumption 470 liters /minute.

• It comes with air fitting series Japan our code 345 00 05600.

Impact wrench 1/2” - 850 Nm “Compact2”

Code Desc.4180008510 6020


Metallic ring seal 1/2” 418RC00350 47Full small shovel of parts kits 418RC00590 76

• Modern impact wrench with square drive 1/2 ", size and weightand maximum torque of 850 Nm.

• Suitable for professionals who constantly use this type ofmachine: tire shops, auto mechanics, assemblers, assembly lines,etc.

• Machine body made entirely of aluminum with non-slip paintcoating and anti-cold, ability to adjust the torque of the threepositions in screwing and unscrewing, type impact mechanism"Jumbo", and sealed at very low maintenance.

• The limited length allows it to be used even in very confinedspaces and centers the weight on the handle of the tool, in ordernot to tire the operator even after long working time.

• 8800 rpm maximum speed per minute, maximum airconsumption 550 liters per minute.

• Supplied as standard with Japan series air connection n/s code3450005600-1/4M

1103


9

Pneumatic tools

Impact wrench 1/2 "

Code Desc.4180004000 5650

Spare PartsCode Description Position split

418RC00350 47 - RING SEAL METAL 8418RC00225 23 - KIT SCOOPS 22418RC00216 14- COUPLE PLUGS 11418RC00220 BASE CAM 13

• Screwdrivers blowback single (rod-in-magic), with square drivefor sockets reinforced 1/2 ".

• Ergonomic handle and centered to a perfect balance. • The maximum torque of 580 nm makes it ideal for usage on the

machine shops, tire shops, metal construction, maintenanceworkshops.

• Adjusting the power of four positions, exhaust air from thehandle, cast aluminum painted black embossed slip.

• Supplied as standard with Japan series air connection n / s code3450005600-1 / 4M

Impact wrench 1/2 "Ultra-7

Code Desc.4180008330 5920

Spare PartsCode Description

418RC00350 47-Metal ring seal 1/2 "418RC00365 50-Kit palette parts 7 pieces

• Impact wrench composite, double-hammer mechanism andpowerful engine, square drive tool 1/2 ".

• Suitable for all types of machining onerous repair shops, tireshops, body shops, and assembly of structural steelwork.

• The composite material makes it light and does not transmit thecold, the pistol shape is balanced so as not to tire the operator,low vibration transmission, torque control in screwing, exhaust airhandle.

• Maximum torque in unscrewing of 1250 nm, maximum speed8000 rpm, air consumption of 750 liters / minute.


1104


9

Pneumatic tools

Impact wrench composite pulse 3/4” “Midi” - 1500 Nm

Code Description4180008520 6030


Metallic ring seal 3/4” 418RC00530 70Full small shovel of parts kits 418RC00365 50

• Modern impact wrench with square drive 3/4 ", in size and limitedweight, comparable to the keys 1/2", and maximum torque of1500 Nm.

• Excellent for medium / small-sized work, offers the possibility ofuse of compasses Measuring greater than 1/2 "without having touse adapters. Suitable for professionals who need a lightweightand compact machine, capable of entering into small spaces andmanageable for long periods without tiring.

• Machine body made of non-slip composite material and anti-coldwith less exhaust, aluminum front body. ability to adjust thetorque of the three positions in screwing and unscrewing, doublehammer impact mechanism.

• The limited length allows it to be used even in very confinedspaces and centers the weight on the handle of the tool, in ordernot to tire the operator even after long working time.

• Maximum speed 5600 rpm, maximum air consumption of 780liters per minute.

• Supplied as standard with Japan series air connection n / s code

Composite impact wrench 3/4 "- 2130 Nm


• Avvitatore pneumatico con corpo in materiale composito leggero,bilanciato e potente, con attacco quadro da 3/4”, indicato perlavorazioni medio pesanti gravose come montaggio/smontaggio diviti di grandi dimensioni e su mezzi commerciali e pesanti.

• Utilizzo tipico in officine meccaniche di mezzi pesanti, movimentoterra, macchinari per edilizia, da cava, manutenzioni varie, ecc.

• Il corpo macchina in materiale composito è estremamenterobusto e resistente agli urti, isola le mani dell'operatore dalfreddo e dalle vibrazioni eccessive, l'impugnatura centrale bilanciaperfettamente il peso e diminuisce la fatica.

• Scarico aria nell'impugnatura lontano dalla zona di lavoro. Massabattente con meccanismo a doppio martello per uno sviluppodella coppia graduale, regolazione della velocità e della coppianella parte posteriore della macchina su tre posizioni.

• Foro di ingrassaggio della meccanica nella parte anterioredell'avvitatore.


1105


9

Pneumatic tools

Composite impact wrench 3/4" extended stem 1950 Nm

Code Desc.4180008410 5990

Tecnical FeaturesAir inlet thread 3/8” gas femaleImpact mechanism system TwinhammerSound emission 97 dB(A)Vibrations (m/s²) 14,5 m/s2Maximum torque 1950 NmMax air consumption 972 liters/minuteAverage air consumption (l/min) 255 l/minDimensions 374 x 84 x 199 mmMinimum air supply hose size (mm) 13 mmWeight 3,74 Kgmax torque (RPM) 6000 RPMCouple working 1300 NmSquare connection 3/4”

• Air screwdrivers with lightweight composite body, balanced and powerful,with square 3/4 "and extended shaft, designed for medium demandingheavy machining operations such as assembly / disassembly large screwsand heavy commercial vehicles.

• Typical use in machine shops of trucks, earthmoving, general maintenance,etc..

• The body of composite material is extremely robust and shock resistant,island operator's hands from the cold and excessive vibration. The centralgrip perfectly balances the weight and decreases fatigue. Air exhaustthrough away from the work area.

• Mass swing with double hammer mechanism for a development of thegradual torque, speed control and torque in the rear of the machine onthree positions. Hole greasing the mechanical in the front of the tool. Weight3.74 kg, air consumption 972 liters / minute.

• USE ONLY BUSH REINFORCED • Supplied as standard with Japan series air connection cod. 3450005700-3 /

8M

Impact wrench 1 "- 2460 Nm


• Screwdrivers with light alloy body, balanced and powerful, withsquare drive 1 ", for working medium heavy heavy as assembly /disassembly of large screws and commercial vehicles and heavy.

• Typical use in machine shops trucks, earth moving machinery forconstruction, quarry, general maintenance, etc..

• The machine body entirely in light alloy is extremely robust andshock resistant, the central grip perfectly balances the weight anddecreases the fatigue, the supplementary helps the operator tosupport the machine and center it on the workpiece. Exhaust airin the handle away from the working area.

• Striking mass with double hammer mechanism for a developmentof the couple gradual adjustment of the speed and torque at therear of the machine on three positions. Lubrication holemechanics in the front of the tool.

• Supplied as standard with Japan series air connection cod.3450005800-1 / 2M

1106


9

Pneumatic tools

Screwdriver heavy pulses 1" extended stem 2900 Nm

Code Desc.4180008380 5970

Tecnical FeaturesSound emission 100 dB(A)Vibrations (m/s²) 7,8 m/s2Couple working 2000 NmMaximum torque 2900 Nmmax torque (RPM) 5150 RPMWeight 11,6 KgMinimum air supply hose size (mm) 13 mmDimensions 520 x 186 x 130 mmImpact mechanism system CloseAir inlet thread 1/2” gas femaleMax air consumption 1150 liters / minuteAverage air consumption (l/min) 370 L/minSquare connection 1

• Air screwdrivers with light alloy body, balanced and powerful, with squaredrive 1" and extended shank, suitable for demanding heavy machiningoperations such as assembly / disassembly of large screws and heavycommercial vehicles.

• Typical use in machine shops of heavy equipment, construction equipment,construction machinery, quarry, general maintenance, etc...

• The body entirely in light alloy machine is extremely robust and shockresistant, the rear handle and that extra help the operator to support themachine and center it on the workpiece. Air exhaust through away from thework area.

• Mass swing hammer mechanism maintenance, speed control and torquecontrol of three positions. Weight 11.6 Kg, maximum air consumption 1150liters / minute.

• USE ONLY BUSH REINFORCED • Supplied as standard with Japan series air connection cod. 3450005800-1 /

2M

Filters-oilers lubricators in line

Code Description Dimensionsmm

Air entrance Uscita aria

418RC00390 55 71 X Ø 43 3/8” F – (1/2” M) 3/8” F – (1/2” M)418RC00400 57 50 X Ø 33 1/4” F 1/4” M

1107


9

Pneumatic tools

Mini power regulator 1/4 "

Code Description Dimensionsmm

418RC00410 58 30x20

• Mini flow regulator for pneumatic tools with air inlet 1/4"female. It is easily applied on any type of machine andadjusts the power and speed on the fly.

• Profit for the proper use of all the tools mounted onmachines that do not have standard speed control. Builtentirely of brass, air inlet female threaded 1/4" malethreaded outlet 1/4".

Mini grease gun for impact hammers

Code Desc.418RC00370 51

• Mini grease gun metal, professional, micro-nozzledesigned specifically for the maintenance of impacthammers pneumatic tools.

• Tank of 100 grams, small and handy. Outside diameter43 mm, height 145 mm.

• Supplied without fat, to be inserted manually.

1108


9

Pneumatic tools

Pneumatic reversible ratchet 1/4 "

Code Desc.4180008220 5810

• Reversible ratchet small and handy for work in tight spaces.Square drive 1/4 ".

• Command survivor's tool head. • Exhausted air flow rear and adjustable. • Loop power adjustment on the back. • Handgrip composite grip. • Ideal for automotive, motorcycle and maintenance. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M


Code Desc.4180007000 5694

• Reversible ratchet small, handy for working in tight spaces. • Square drive 3/8 ". • Command survivor's tool head, rear exhaust, handgrip composite

material, rubber coating of the head, scratch. • It equipped with adjustable torque in screwing and unscrewing. • Ideal for automotive, motorcycle and maintenance. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

1109


9

Pneumatic tools


Code Desc.4180008210 5800

• Reversible ratchet with square 1/2 ". • Command survivor's head. • Exhausted air flow, at the center of the tool body. • Grip composite slip. • Ideal for automotive, motorcycle and maintenance. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Pneumatic drill spindle max 10mm reversible

Code Desc.4180008260 5850

Spare PartsCode Description Features

417RC02185 150-1/10 Spindle parts

• Compact and lightweight pneumatic drill, of high power, for alldrilling operations in each material.

• Maximum capacity of opening spindle 10mm., metal body withspecial coating for anti-skid paint, keyless chuck, exhaust air fromunder the handle.


1110


9

Pneumatic tools

Reversible air drill chuck 13 mm max

Code Desc.4180005500 5672


417RC00085 2-1.5/13 Spindle parts 3 / 8X24 UNF

• Pneumatic drill sturdy and easy to handle, high power, for all theoperations of drilling in each material.

• Reversibility for use also as a screwdriver at high power. • Maximum capacity of opening spindle of 13 mm., Body in shiny

metal, keyless chuck, exhaust air from under the handle. • It equipped as standard with additional handle for safe use also

under considerable strain. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Grinder straight composite yoke 6 mm


• Mini straight grinder of smaller dimension but by the great power,with the collet 6 mm for use with milling cutters and grindingwheels in any working field.

• Can be used in crafts in both industry for working on metal,wood, plastic materials, grinding operations, mechanical field,processing of fibers, etc.

• The construction of composite material allows the machine to bevery light, isolated from the cold, and the ergonomic designmakes it very easy to handle, sturdy, non-slip.

• Equipped with rear exhaust swiveling and adjusting the speed ofrotation on the handle.


1111


9

Pneumatic tools

Maxi straight grinder

Code Description4180008800 6051- Maxi straight grinder

• Straight pneumatic grinder with speed adjustment • using a selector. • Excellent comfort with high power levels, 0.5 HP • Ideal for heavy-duty grinding. • Can be used with hard metal or corundum cutters, and all

abrasives • fitted on 6 mm shank • Complete with pre-fitted lubricator for automatic oil dosage • Transparent oil tank for level control • Starter lever with safety. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Angle Grinder 125 mm

Code Desc.4180005200 5668

• Pneumatic angle grinder for deburring and cutting discs 115 and125 mm.

• Securing discs via threaded flange M14 female, rear exhaust,metal body with special anti-slip coating in black patent leatherembossed.

• Standard with additional handle and cap spark. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

1112


9

Pneumatic tools

Remove protective / canceller pneumatic

Code Desc.4180007400 5698


Brush large underbody, mastics, deadening, tar sealants. Sandblasted 418RC00100 3/GBrush average rust deadening. Sandblasted 418RC00110 3/M

Fine brush to paint, antirust, cleaning welds, cleaning sheets. 418RC00120 3/MSpecial steel brush to remove paint from aluminum sheet metal. 418RC00130 3/I

Hard screed, rubber adhesive removers, adhesive tape, adhesive strips. 418RC00140 3/RFlange brushes 418RC00150 3/FBelt radiator red 418RC00170 5/RBelt blue radiator 418RC00180 5/B

• Handy and versatile tool with multiple uses, suitable forremoving rust, old paint, coatings sound-, antirust, etc..

• By mounting the toothed disc, rubber can remove oldadhesive from plates, plastic parts, glass, crystal, withoutheating or deform media for reuse.

• Available a great variety of brushes for adaptation to thejob.

• Body of lightweight material and non-slip, progressiveactuation lever to adjust the speed of the brushes, rearexhaust, additional handle for greater safety duringmachining operations.

• Bundled with 3 brushes coarse, our code RC 418 00100-3 /G, 1 brush, fine-grained, our code RC 418 00120-3 / F, 1disc, rubber, Our markup 418 RC 00140-3 / R, all incardboard box.


1113


9

Pneumatic tools

Belt grinder straight 10mm

Code Desc.4180007200 5696


330x10 tape 40 grit zirconia 418RC00005 1/40330x10 tape 60 grit zirconia 418RC00008 1/60330x10 tape 80 grit zirconia 418RC00010 1/80330x10 tape 120 grit zirconia 418RC00020 1/120330x10 tape 180 grit zirconia 418RC00030 1/180330x10 tape 240 grit zirconia 418RC00040 1/240

Front wheel 418RC00305 38

• Compact, lightweight and handy tool for grinding operations,deburring, scraping and sanding in difficult and hard to reachplaces.

• Tilt adjustable belt of 360 °, fast and simple replacement of theabrasive, metal body with special paint coating embossed slip.

• Rear exhaust. • Dimensions of the tapes: 330 x 10 mm. • Bundled with No. 1 tape 80 grit. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Belt grinder straight 20 mm

Code Desc.4180007300 5697


520 x 20 Tape 40 grit zirconia 418RC00045 2/40520 x 20 Tape 60 grit zirconia 418RC00048 2/60520 x 20 Tape 80 grit zirconia 418RC00050 2/80520 x 20 Tape 120 grit zirconia 418RC00060 2/120520 x 20 Tape 180 grit zirconia 418RC00070 2/180520 x 20 Tape 240 grit zirconia 418RC00080 2/240

• Compact, lightweight and handy tool for grinding operations,deburring, scraping and sanding in difficult and hard to reachplaces.

• Tilt adjustable belt of 360 °, fast and simple replacement of theabrasive, metal body with special paint coating embossed slip.

• Rear exhaust. • Dimensions of the tapes: 520 x 20 mm. • Bundled with No. 1 tape 80 grit. • Fornito di serie con connexiono aria seria giappone cod.

3450005600-1 / 4M

1114


9

Pneumatic tools

Pneumatic random orbital sander

Code Desc.4180008270 5860

• Roto-orbital sander high performance, for sanding simple and fastto all body parts.

• Amplitude of the orbit of 5 mm. Adjusting simple and intuitive ofthe rotation speed tramiteuna lever on the handle easilyaccessible.

• Ergonomically correct Handgrip for less fatigue, head of thecoating, preparation for dust extraction.

• Reduced vibration for safeguarding the health of the operator isnot causing nerve damage carpal.

• Attack pad threaded 5/16 "female. • Exclusive speed controller in the handle. • It allows adjustment even during operation. • Supplied with pad 15 holes. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Mini sander angle clamp 6 mm


• Utensil by the small size but by the great power, with the collet 6mm for use with milling cutters, serrated roller, sanding pads withshank 6 mm for diskettes, etc.

• Can be used in crafts in both industry for working on metal,wood, plastics, sanding and grinding, for the correction of defectson autocarrozzerie, by removal of material in hidden points.

• Construction completely in light alloy with coating machine oil-resistant and non-slip, head with reference to 90 ° with alubrication hole for the inner mechanical, adjustment of speed onthe machine body for the best use of each type of abrasive. Rearexhaust.


1115


9

Pneumatic tools

Mini random orbital sander 75 mm

Code Desc.4180008120 5715

Spare PartsCode Description Diam. mm Features Grain

3420102230 75-M6 - Velcro backing pad diameter 75mm M6 -3340500050 75X120 75 Velcro abrasive disks 1203340500060 75X150 75 Velcro abrasive disks 1503340500070 75X180 75 Velcro abrasive disks 1803340500080 75X220 75 Velcro abrasive disks 2203340500100 75X280 75 Velcro abrasive disks 2803340500110 75X320 75 Velcro abrasive disks 3203340500130 75X400 75 Velcro abrasive disks 4003340500160 75X800 75 Velcro abrasive disks 8003340500190 75X1500 75 Velcro abrasive disks 15003340500250 75X2500 75 Velcro abrasive disks 25003420102200 74 - Interface soft velcro 75mm -

• Random orbital sander latest generation for use with discs ofsmall diameter, max 75 mm, ideal for sanding operations onsmall parts and in confined spaces, where are required highquality finishes.

• Used successfully in the areas of the body, metal working andwood.

• Particularly suitable in combination with our repair kits headlightscode 411 00 18010-4645.

• Robust and ergonomic, light weight, orbit of only 3 mm, with airinlet female threaded 1/4 "gas, cruise control and exhaust airsilencer.

• Non-slip rubber coated handle and anti-cold for the operator'shands.

• Provided with air connection inserted series japan and pad ø 75mm.

1116


9

Pneumatic tools

Mini angle polisher 75 mm

Code Desc.4180008130 5720

Spare PartsCode Color Density Description Features

3420102240 - - 76-5/46 Velcro backing pad diameter 75 mm 5/16 "UNF3420102210 Arancio Hard 75/D Dented buffers3420102220 Light blue Soft 75/M Dented buffers

• Mini angle polisher latest generation, specially designed for usewith pads or discs of maximum diameter 75 mm. Ideal forpolishing of small parts and in confined spaces, where arerequired high quality finishes.

• Used successfully in the areas of the body, metal working andwood. Particularly suitable in combination with our repair kitsheadlights code 411 00 18010-4645.

• Robust and ergonomic, light weight, equipped with air inletfemale threaded 1/4 "gas, cruise control and exhaust air silencer.

• Non-slip rubber coated handle and anti-cold for the operator'shands.

• Provided with air connection inserted series japan and pad 75mm.

1117


9

Pneumatic tools

Mini miter angle 75 mm

Code Desc.4180006400 5688


Cutting discs 3400001000 75x1,2Cutting discs 3400002600 75x3,2Grinding Discs 3400001400 75x6,4

• Small, handy machine for cutting pipes, laminates, wire ropes,etc..

• Suitable for all sectors of metal working: bodywork, mechanicalcar / trucks, carpentry, maintenance, engineering, etc..

• Suitable for use with abrasive disks of 75 mm diameter, with acenter hole of 10mm.

• The handle and the protective cover designed for working in anyposition.

• Machine body in metal coated with a special anti-skid paint, rearexhaust.


Pneumatic saw

Code Desc.4180005600 5673

Spare PartsCode Description Teeth per inch

3220000600 39T18 183220000610 39T24 243220000620 39T32 32

• Ideal for body shop and sheet metal processing workshops. • With an insulated handle. • Private non-slip material. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

1118


9

Pneumatic tools

Pneumatic chipping hammer kit

Code Desc. Characteristics4180004800 566 Kit complete chipping hammer


4180004860 5664/1 Curved chisel for cutting sheet metal maximum thickness 1mm (1)4180004880 5664/2 Chisel cutting by welding spots (2)4180004900 5664/3 Rovetti curved chisel size (3)4180004920 5664/4 Chisel universal (4)4180004940 5664/5 Chisel double edged sheet metal (5)4180002800 5641 Check spring (6)4180004850 5663 Quick change chuck (7)

• Chipping hammer ideal for jobs in construction and plumbing. • Suitable for cutting sheet metal cutting and detachment rivets

and rivets, removal of coatings and plasters. • Kit in shockproof case. • Chisels with 11 mm hex. • Content: 1 hammer - 1 retaining spring and No. 5 chisels for

metal and sheet metal. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Detach points with pneumatic torque arm

Code Desc.4180005700 5675

Spare PartsCode Description Dim. connection Tip type Total length Use for

4770000250 25 - 6,5 8 HSS COBALT 40 Normal steels limited thickness4770000260 26 - 8 8 HSS COBALT 40 Normal steels limited thickness4770000262 26 - 44/8 8 HSS COBALT 44 Normal steels limited thickness4770004870 346 - 6,5 8 HSS COBALT + TITANIUM 44 Cutting steels of low and medium hardness4770004880 346 - 8 8 HSS COBALT + TITANIUM ALUMINIUM 44 Cutting steels of low and medium hardness4770004890 347 - 40 8 INTEGRAL HARD METAL 40 Drilling spars4770004900 347 - 4 8 INTEGRAL HARD METAL 44 Drilling spars

• Maximum convenience for the removal of the welding points. • With special arm which holds the workpiece in place for the

precise removal, no reaction of the welding point. • By adjusting the drilling depth. • Equipped with HSS drill diameter 8 mm length. 44 mm. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

1119


9

Pneumatic tools

Pneumatic Knife detach glass

Code Desc.4180005800 5677

• Detach glass swinging. • Tool for the removal of glued glazing. • Cutting with oscillating blades. • Supplied without blade. • Tool with feeding tube length about 140cm and protective cover

exhaust air. • Supplied as standard with Japan series air connection cod.

3450005600-1 / 4M

Straight knife blade to detaches glass

Code Desc. Extr. mm4180006020 5679/G35-25 25/35

• Steel blade knife detaches the glass, with universal double hexagon, for theseparation of the windscreen and glued.

• Available in various shapes and sizes for the most common applications.

Straight knife blade to detaches glass

Code Desc. Extr. mm4180006045 5679/G100-60 50/90



Circular blade with hexagon for knife detaches glass

Code Desc. Ø mm4180005900 5678/S80 80

• Steel blades for knives detaches the glass, with universal double hexagon, forthe separation of the windscreen and glued.


Blade at U 24 mm glass detach knife

Code Desc. Extr. mm4180006000 5679/U24 24

• Steel blade knife staccavetro, with universal double hexagon, for the separationof the windscreen and glued.


1120


9

Pneumatic tools

Blade at U 36 mm glass detach knife

Code Desc. Extr. mm4180006010 5679/U36 36



blade at U 65 mm glass detach knife

Code Desc. Extr. mm4180006050 5880 60



Blade offset, knife detaches glass

Code Desc. Extr. mm4180006040 5679/G57-35 35



Angled blade knife detaches glass

Code Desc. Extr. mm4180006030 5679/H39-24 25,4-90°



Blades hammer

Code Desc.4180006055 5681



Lama a L per coltello staccavetri

Code Desc. L. tagliente mm4180006070 FB-209 38-90°

• Lama in acciaio per coltelli staccavetro, con attacco universale a doppio esagono,per il distacco di parabrezza e cristalli incollati.

Lama dritta per coltello staccavetri

Code Desc. L. tagliente mm4180006060 FB-081 60


• Con tagliente zigrinato

Lama dritta per coltello staccavetri

Code Desc. L. tagliente mm4180006065 FB-194 110


1121


9

Pneumatic tools

Pneumatic rode-valves

Code Desc.4180001400 5627

• The rode-valves is essential in all the workshops of car repairs for thespeed with which it allows to perform polishing of valves. This devicemakes automatic and therefore perfectly homogenous traditional techniqueof polishing abrasive, is the means for alternating rotations to the right andleft side. Supplied in plastic case with full accessories.

• Contents: 1 sucker ø 20; 1 cup ø 33; 1 cup ø 38; 1 O 1 revolves reductionø ø 9 reduction on July 1; 1 torque screwdriver for valves with intaglio.


4180001500 5628 VACUUM SMALL ø 204180001600 5629 VACUUM AVERAGE ø 334180001700 5630 VACUUM HIGH ø 384180001800 5631 ARTICULATED JOINT

Universal pneumatic disassemble Valves

Code Desc.4430049600 952

Spare PartsCode Description

4430054160 1107 - ESTRATTORE DIAM. 25,5 CON BOCCOLE:24,5-25-27-29-32 MM4430054170 1108 - ESTRATTORE DIAM 34 CON BOCCOLE: 34-41-50 MM4430054180 1109 - ESTRATTORE VALVOLE DIAM. 19,8MM

• Universal pneumatic device for disassembly / assembly of all types ofvalves in petrol and diesel engines.

• Built specifically for 4/5 valves per cylinder engines. • The new version of the valve-awards extractors allows greater

convenience and a smaller footprint. • Operating pressure: 6 bar. • Max. thrust of the pneumatic piston: 6 bar 75 kg. • Max. overall dimensions: width 42 cm, height 22 cm.

1122


9

Pneumatic tools

Disassembles pneumatic shock absorbers

Code Desc.4430049855 970-002

• Disassembles pneumatic dampers. • Extremely versatile thanks to the self-leveling beam that

fits perfectly in any spring shock absorbers conical ordecentralized (see good, stylus, Alpha 147).

• For all cushions with Mac Pherson system. • The particular composition of the cylinder, built in light

aluminum, nylon resin and fiberglass prevents corrosionand oxidation of the internal parts of the machine.

• Equipped with protective cage that allows you to workfreely and safely (also adaptable on the previous model).

• Supplied with two brackets for springs with a diameter of78 to 130 mm and from 125 to 205 mm for a very widerange of use, and a locking clamp our code 4430049870.

• And 'particularly suitable for disassembly / reassembly ofthe dampers of type long, in vehicles comm.li, off-road,minivans and SUVs.

• This tool provides a high saving of time and a totalsecurity during all stages, thanks to the safety valves ofthe pneumatic system and the reliability of the parts thatcompose it.

• Convenient tray gear on the upper part of the machine. • With CE certification. • With operating instructions and maintenance. • TECHNICAL DATA • Pressure: min. 6 Atm; max 10 Atm. • Overall dimensions: 140x65x40 cm. • Weight: 62 kg. • Max thrust: 6 Atm: 735 kg; 8 Atm: 980 kg; 10 ATM:

1250 kg.

Locking clamp for shock absorbers

Code Desc.4430049870 971

• Vice applicable to disassemble-pneumatic shock absorbers our art.443 00 49855-970-002.

• The grip allows you to insert the shock absorbers to the tool whenfor reasons dimensional structural or not and 'can use one of twobrackets supplied.

• The grip allows you to use it apart dampers for models mounted oncars alfa (see 156) that have small springs (not systemMacPherson).

1123


9

Pneumatic tools

Adapters for springs tight coil

Code Desc.4430049860 971A

• Couple adapters with coil springs tight, for mounting on ourdismounts pneumatic dampers cod. 443 00 49855-970-002.

• This pair of adapters allows the dismantling, in union with the chuckcod. 443 00 49870-971, also of the springs with very narrow coilsmounted on some cars, where the jaws supplied as standard are noteffective.

• Indicate on car with multi-link front suspension. • Alfa 156.

Bracket kit for shock absorbers Mercedes, Renault and Citroen

Code Desc.4430049875 971C

• Kit consists of three brackets applicable in many carmodels: Mercedes Class A, B, C, E, Renault Megane,Citroen C2, C3.

• Kit adaptable to our shock absorbers dismantled tire code4430049855 (also the previous model).

• Consisting of: 1) Bracket take springs with diametersfrom 105 to 182 mm, adaptable to the Mercedes Class A,B, C, E, Renault Megane and Citroen C2, C3. 2) upperbracket for shock absorbers Mercedes Class A, B, C, E; 3)bracket galvanized white-specific shocks Mercedes E-Class.

Staffa media

Code Desc. Range4430049876 971F 105-182 Nm

• Utilizzabile su smonta ammortizzatori sino a 2,5 Ton di potenza. • Per ultime vetture del gruppo Fiat • Range 105-182 mm • Staffa non in dotazione dello smonta ammortizzatori

1124

air blow gun barrel length - meccanocar · • air connection bayonet. mastic gun spraying and tang...

Documents