air-handing units · steam humidifier 500 500 500 500 500 500 500 500 droplet separator 150 150 150...

Air handling units - HEINEN & HOPMAN 2020 © 1Air handling units - HEINEN & HOPMAN 2020 ©1 Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

AIR-HANDING UNITSAIR-HANDING UNITSProducts

Air handling units - HEINEN & HOPMAN 2020 © 1Air handling units - HEINEN & HOPMAN 2020 ©1

COMPANY INTRODUCTION

Heinen & Hopman is a reliable partner in the global maritime sector, offering top quality products and service in the field of climate control (HVAC & Refrigeration). The no-nonsense and entrepreneurial character of the founders who established the company in 1965 is still one of the main cornerstones of Heinen & Hopman. We support our clients using our knowledge and experience by realising the best possible climate control solutions; either fully customised or with varying degrees of standardisation. Like our clients, we are continuously active on a global scale to ensure that we can always be of service. We are also constantly searching for sustainable innovations as we aim for the best and very latest solutions in collaboration with our clients. Heinen & Hopman is critically aware that a company’s greatest asset is its employees – it is they who represent the added value of our business. Our goal is to continue to expand in the global market for maritime climate control solutions in a future-proof way.

In short, you can rely on Heinen & Hopman to deploy the know-how and expertise required to solve any heating, ventilation, air conditioning and refrigeration issue onboard ships. We see complexity as a challenge, no matter where your vessel may be.

OPERATING GLOBALLY

Global networking is crucial in every line of business and the shipping industry is certainly no exception. Being able to offer the highest quality of service and products to our clients at all times and in all places is of enormous importance to us. This is why Heinen & Hopman aims to keep expanding our network and know-how and ensure we are exactly where our clients need us to be.

Americas

Europe

Asia3

Countries11Offices

3Factories

220Employees

11Countries

22Offices

4Factories

1200Employees

7Countries

10Offices

7Factories

380Employees


APPLICATION

Air handling units DB are used for the offshore and marine industry. The air handling units are specially designed to be compact and allow for fitting in the often limited space of ships, yachts and offshore modules. The fans are made of high-quality materials to withstand the extreme sea climate conditions.

The air handling unit is made of the most sturdy materials to withstand extreme cold or hot and humid air conditions, the salt sea air and the extreme environments. StandardsThe units comply with the following guidelines: Machinery Directive 2006/42/EC Low Voltage Directive 2006/95/EC ATEX 94/9 / EC (ATEX 95) EMC Directive 2004/108/EC Pressure Equipment 97/23/EC The units conform to the following casing-properties (according to EN 1886): Mech. • Casing strength: D1 • Casing air leakage: L1 • Filter bypass leakage: F9 • Therm. transmittance: T2 • Thermal bridging factor: TB2

Certification• ISO 9001

Air handling units - HEINEN & HOPMAN 2020 ©2

Air handling units - HEINEN & HOPMAN 2020 © 3Air handling units - HEINEN & HOPMAN 2020 ©3 Air handling units - HEINEN & HOPMAN 2020 ©3

Air handling units - HEINEN & HOPMAN 2020 © 4Air handling units - HEINEN & HOPMAN 2020 ©4 4Air handling units - HEINEN & HOPMAN 2020 ©


MATERIAL

CasingThe casing is built out of a aluminium framework (optional: galvanized steel or welded stainless steel AISI316L) holding double walled panels and, if required, provided with inspection doors. The thickness of the framework is at least 2mm, depending on size and application. The double walled panels are made of galvanized steel (optional: stainless steel AISI316) and insulated with 40mm thermal and acoustic insulation, Rock- wool type 223 cross section, other insulation are possible on request. Sheet thicknesses are available from 1mm up to 2mm. Air handling units outdoors are provided with pitched roof plates and 50mm overhanging eaves.

DoorsThe inspection doors are fitted with polished AISI316 stainless steel locks and hinges which are mounted on the outside of the panels to avoid thermal bridges. Doors that close overpressure sections are provided with a safeguard to prevent dangerous situations. Not self- adhesive EPDM rubbers are used to prevent air leakage.

GroundingAll components are provided with 16mm2 earth-bonding.

Electric heaterThe electrical heaters meet the requirements of Lloyds and Veritas. The terminal box is made of galvanized steel and also the casing, the elements are made of inox steel. The connections are sealed to avoid moisture between the jacket and the elements. Because of vibrations, the elements are supported at the ends. The electrical heaters are provided with a maximal temperature protection. The heater complies with protection degree: IP44. The electrical heaters are also available in EX-type, entire heater is fully made of stainless steel AISI316 and complies with classification: Ex ed IIC T3 (optional: zone I and zone II) and protection degree: IP65.

Cooling coilThe cooling coil is selected according to the project specific air conditions and refrigerant type. Direct expansion, seawater and chilled water are common applied refrigerants. The coil can be produced in Cu/Al, Cu/Cu, CuSn/CuSn, stainless steel/ aluminum or titanium in the case of seawater. An anti-corrosive Poly/Al coating can be applied after manufacturing. If the face- velocity of the coil is higher than 2.5 m/s a Polypropylene mist eliminator is installed. Optionally the mist eliminator is carried out in stainless steel AISI304 or AISI316. The cooling coil is provided with a stainless steel AISI316 frame and positioned above a stainless steel AISI316L drip tray provided with a 1” condensate drain.

Heating coilThese can be supplied in the same design as the coolers except the heating coils are suitable for steam, hot water or another heating medium.

Base frameTo support the units during transport and on-site, the air handling units are mounted on a rigid base frame. The base frame is made of hot dipped galvanized mild steel beams or bended 4 mm stainless steel AISI316L U-profiles which are welded by certified welders. The main welds can be exposed to non-destructive testing (NDT) to check on imperfections. Hoisting lugs are standard equipped with a RAL1028 yellow coating. The frames are provided with diagonal positioned earth bosses.

Alternatives available on request. Due to continuous product development, Heinen & Hopman reserves the right to introduce alterations without prior notice.

Don’t hesitate to contact us for more information about our service options. We are eager to explain the possibilities for your vessel or structure.

Scan the QR-code or visit heinenhopman.com


FiltersThe unit is standard fitted with EU-4 pleated filters that will be mounted in galvanized steel filter frames. The filters are grounded through a detachable clip on the filter frame. An inspection door is provided on the inlet side of the filter, so maintenance and inspection takes place on the dirty side. Optionally, the unit can be equipped with ATEX, HEPA filter or coalescer.

Weather louvers If the unit takes in fresh air, the unit will be equipped with a weather louver. The inlet section can be performed with a mist eliminator and/or coalescer behind the louver and the intake damper to avoid water infiltration during extreme weather conditions.

DampersContra rotating dampers, the casing, valves, shafts, levers and connecting rods are made of stainless steel AISI316. The rate of leakage is ≤ 0.032 m3/s/m2 at a pressure difference of 1000 Pascal (tested with a damper with dimensions of 1200x1500 mm.) The valves can be operated manually or by means of an electric servo motor or pneumatic actuator.

Air flangesThe air flanges are carried out in 4mm to 6mm galvanized steel (optinal: stainless steel), depending on the size and application, and foreseen with a specific-hole pattern.

FansFans are generally direct driven plug-in type. The impeller consists of coated steel and the base frame is made of stainless steel AISI316. Optionally, stainless steel AISI316 backward curved double inlet centrifugal fans are used. The fan and motor are assembled on a common frame and isolated from the casing by vibration dampers and flexible connections. Fans for Zone 1 or Zone 2 are fitted with brass inlet cones and other measures to reduce the chance of sparks. Access to the fan sections is provided with perforated CE grids for safety.Note: Plug-in type fan till max. 600Pa static pressure and centrifugal fan for higher pressure.

MotorsATEX units are standard equipped with 3 phase low voltage 50 Hz and 60 Hz cast iron motors with offshore coating. The motors can be supplied in Zone 1 and Zone 2 version.

Controls/WiringThe electric wiring consists of flame retardant PVC halogen-free cables both unarmed and armored. For the wiring of the various electrical components from the inside to the outside are standard brass CMP A2 cable glands for unarmored cables installed. In case of armored cables there will be standard E1FX TRI-STAR cable glands used. Optionally, the wiring can be performed on stainless steel AISI316 ship-ladder cable trays.





AIR HANDLING UNIT SELECTION

Maximum air quantity for a standard AC unit

* The width of the unit can increase in extreme outside conditions

Dimensions of various parts of a standard AC unit

Mixing section Fan section

Unit Size 1 2 3 4 5 6 7 8

Height of the unit excl. bedfranme H 780 780 1280 1530 1530 1530 2100 2600

Width of unit* W 780 1280 1530 1530 1700 2100 2600 2600

Length of mixing section Lm 1000 1000 1200 1400 1550 1700 1900 2100

Length of fan section Lf 250 300 400 500 700 800 900 1200

7Air handling units - HEINEN & HOPMAN 2020 ©


SECTION SELECTIONThe length of the air-handling unit depends on the selected options. The sections that are listed here below included the mixing section and the fan section determine the overall length of the air handling unit.

Length in mm

Symbol Function 1 2 3 4 5 6 7 8

Filter section: EU-4 class filter. Other filters (G3-F9 filters), HEPA filters and carbon filters are available on request.

450 450 450 450 450 450 450 450

Heating coil: Steam, hot water, thermal oil or electric.

200 200 200 200 200 200 200 200

Cooling coil: Chilled water or direct expansion (including droplet separator) *Based on Tin 5oC - Tout 11oC with cooling capacity of 50kJ/kg.

660 660 660 660 660 660 660 660

Steam humidifier 500 500 500 500 500 500 500 500

Droplet separator 150 150 150 150 150 150 150 150

Silencer: The length depended on needed sound reduction value.

Possible length: 500 - 750 - 1000 - 1250 - 1500

Rotating enthalpy exchanger 400 400 400 400 480 480 480 550





www.heinenhopman.com

Heinen & Hopman encourages a more

sustainable world. By providing eco-friendly solutions and serviceswe offer our clients

the option of reducing energy consumption

and thus CO2 emissions.

Ventilation Air Conditioning RefrigerationHeating

PROVIDED BYHEINEN & HOPMAN

Inside22ºC

OUTSIDE35°C45°C

HUMIDITY90%40%

AustriaT: +43 1720 1309E: [email protected]

BrazilT: +55 213 587 4241/4244E: [email protected]

CanadaT:+1 450 659 6571E: [email protected]

DenmarkT: +45 5164 1614E: [email protected]

France - La CiotatT: +33 4 4204 8685E: [email protected]

France - AntibesT: +33 4 8902 4562 E: [email protected]

GermanyT:+49 4073 1680E: [email protected]

GermanyT:+49 471 9869 300E: [email protected]

IndiaT: +91 336 499 1293E: [email protected]

ItalyT: +39 187 187 8500E: [email protected]

The Netherlands (HQ)T: +31 33 299 2500E: [email protected]

The Netherlands - RotterdamT: +31 18 020 9210E: [email protected]

NorwayT: +47 6919 0900E: [email protected]

Peoples Republic of ChinaT: +86 213 253 2896E: [email protected]

Peoples Republic of ChinaT: +86 510 8528 1763E: [email protected]

PolandT: +48 914 331 800E: [email protected]

RomaniaT: +40 236 448 222E: [email protected]

RussiaT: +7 812 449 3535E: [email protected]

SingaporeT: +65 6897 7879E: [email protected]

South KoreaT: +82 704 901 0000E: [email protected]

SpainT: +34 932 259 668E: [email protected]

SwedenT: +46 3121 7500E: [email protected]

TurkeyT: +90 216 493 8118E: [email protected]

UAE - Abu Dhabi T:+971 2550 4147E: [email protected]

UAE - DubaiT: +971 4263 5453E: [email protected]

USA - Seattle, Washington T: +1 206 632 7883E: [email protected]

USA - Fort Lauderdale, FloridaT: +1 954 463 0110E: [email protected]

USA - Houma, Louisiana T: +1 985 876 7982E: [email protected]

Do you require more information about our products or do you require advice? I am keen to help you further!

“ “

Eric Stoffelsen- Sales Manager [email protected]

air-handing units · steam humidifier 500 500 500 500 500 500 500 500 droplet separator 150 150 150...

Documents