air movement range - omega...
TRANSCRIPT
Air Movement Range
Contents
Ceiling Fans and Accessories O’Air - Remote Controlled Ceiling Fans
SMC - Ceiling Fans
O’Air - Add On Fan Lights
Accessories
get comfortable with Omega’sair movement range
Commercial & Industrial Fans TECHPRO - Floor Fans
TECHPRO - Pedestal Fans
TECHPRO - Wall Fans
TECHPRO - Oscillating Ceiling Fans
Exhaust Fans, Ventilation Systems,Ducted Kits & AccessoriesLenco - Ceiling Exhaust Fans
Lenco - Ceiling Exhaust Fans with Light
Lenco - Window Exhaust Fans
Vapotec - Steam Sensors
Vapotec - Hi - Flow Ducted Exhaust Fans
Lenco - Metal Exhaust Fans
O’Air - 3 in 1 Heat, Light and Fan Units
Lenco - Wall Exhaust Fans
Lenco - 2 Room Ventilation System
Lenco - Roof Fans
Lenco - In Line Fans
Lenco - Insulated Ducting
Accessories
Ducted Kits
Omega brings you the very best in air movement. A range of premium brand products that offer innovative solutions for the home and workplace.
Omega sources the latest product innovations, designs and technologies. This enables Omega to offer products that perform at optimum levels and suit current decor and style trends.
To support the latest premium equipment range of quality products, Omega offers a wide range of accessories. Using these factory specified parts ensures all components operate at maximum efficiency. Relax with the knowledge that you’ve made the right choice with Omega’s Air Movement range.
Air Movement Range
SMC - Hang Sure Range
KA36L 36” - 900mm Aluminium Ceiling Fan (white)KA48L 48” - 1200mm Aluminium Ceiling Fan (white)KA56L 56” - 1400mm Aluminium Ceiling Fan (white)
Other colours available, please contact you local Omega office for further information
Modern aluminium white finish. Pre-wired for ease of installation. 3 speeds, reversible and fully light adaptable. Comes with a Hang Sure hanging kit for cathedral and ordinary ceilings. 3 year in-home warranty.
O’Air - Hang Sure Remote Control Range
RFA1400 56”- 1400mm Remote Controlled Ceiling Fan (white)RFA1200 48”- 1200mm Remote Controlled Ceiling Fan (white)
Comes with remote control dimmer capabilities
Dimmer capabilities available only with the use of CLW and OLWadaptable lights (featured on page 5)
Modern aluminium white finish. Pre-wired for ease of installation. 3 speeds and light/dimming (by adding OLW or CLW lights) available on remote.
O’Air remote control ceiling fans feature stunning modern designs and provides you with the comfort and convenience of a remote control.
The SMC range offers a full range of conventional ceiling fans including rattan and aluminium styles.
A full range of light attachments, fittings and accessories are also available.
ceiling fans
convenience and control at the tip of your fingers
Recommend Down Rod Length
Ceiling Height 13’ 12’ 11’ 10’ 9’
Minimum Rod Size 52” 36” 24” 18” 12”
In summer a ceiling fan moves the air creating a breezechill effect, with a continual quiet action.
In winter a ceiling fan recirculates the rising warm air from your heating system which would other-wise escape through the roof.
Purchase The Correct Fan For Best Efficiency
Room Size 50m2 30m2 20m2
Fan Size 56” 3 blade 48” 4 blade 48” 3 blade
O’Air - Rattan Hang Sure Remote Control Range
RFR1200 48”- 1200mm Remote Controlled Ceiling Fan (white)
Comes with remote control dimmer capabilities
Dimmer capabilities available only with the use of CLW and OLWadaptable lights (featured on page 5)
Fashionable rattan white finish. Pre-wired for ease of installation. 3 speeds and light/dimming (by adding
OLW or CLW lights) available on remote.
page 3
SMC - J-Hook Range
KA36LJ 36” - 900mm Aluminium Ceiling Fan (white)KA48LJ 48” - 1200mm Aluminium Ceiling Fan (white)KA56LJ 56” - 1400mm Aluminium Ceiling Fan (white)
Modern aluminium white finish. Pre-wired for ease of installation. 3 speeds, reversible and fully light adaptable. Comes with a J-Hook hanging kit for ordinary ceilings. 3 year in-home warranty.
SMC - Aluminium Blades
KA36BL Blade to Suit KA36 - Set of 3 KA48BL Blade to Suit KA48 - Set of 3KA56BL Blade to Suit KA56 - Set of 3
O’Air - Lights
OLW Oyster Light (white)CLW Clipper Light (white)
Lights are suitable for both SMC and O’Air fans
SMC - Rattan Blades
KW52AWBL Blade Antique White Suit KW52AW - Set of 4KW52BNBL Blade Brown Suit KW52BN - Set of 4KW52BGBL Blade Beige Suit KW52BG - Set of 4KW52PBBL Blade Polished Brass Suit KW52PL - Set of 4
SMC - Flush Mount Controllers
FMFC36 Flush Mount Fan Controllers Suit KA36FMFC4856 Flush Mount Fan Controllers Suit KA48/56FMFC52 Flush Mount Fan Controllers Suit KA52
SMC - 750mm Hang Sure - Down Rods
DR750AW 750mm Down Rod - Antique WhiteDR750BG 750mm Down Rod - BeigeDR750BN 750mm Down Rod - BrownDR750PB 750mm Down Rod - Polished BrassDR750W 750mm Down Rod - White
SMC - 1500mm Hang Sure - Down Rods
DR1500AW 1500mm Down Rod - Antique WhiteDR1500BG 1500mm Down Rod - BeigeDR1500BN 1500mm Down Rod - BrownDR1500PB 1500mm Down Rod - Polished BrassDR1500W 1500mm Down Rod - White
SMC - J-Hook - Down Rods
DR750WJ 750mm Down Rod - WhiteDR1500WJ 1500mm Down Rod - WhiteHSK Hang Sure KitJHK J Hook KitJH300 J Hook 300mm Screwed
adjustable convenience to
suit your lifestyle
Beige
Polished Brass
Brown
Antique White
Antique White
Also available in:
ceiling fans andaccessories
page 5
SMC - Rattan Hang Sure Range
KW52AW 52” - 1300mm Rattan - Antique WhiteKW52AW-OL 52” - 1300mm Rattan - Antique White + Oyster LightKW52BG 52” - 1300mm Rattan - BeigeKW52BN 52” - 1300mm Rattan - Brown KW52PB 52” - 1300mm Rattan - Polished Brass
Fashionable rattan finish. Pre-wired for ease of installation. 3 speeds, reversible and fully light adaptable. Comes with a Hang Sure hanging kit for cathedral and ordinary ceilings. 3 year in-home warranty.
commercial and industrial fans
TECHPRO - Pedestal Fans
762P/3K Pedestal Fan 750mm Oscillating Air - 3 SpeedFS65P/3K Pedestal Fan 635mm Oscillating Air - 3 Speed
TECHPRO- Oscillating Ceiling Fan
OB-16 Oscillating Air Ceiling Fan - 3 Speed
TECHPRO - Wall Fans
D12W30/K Wall Fan 12” Oscillating Air - 3 SpeedD16W40/K Wall Fan 16” Oscillating Air - 3 Speed
Omega’s range of TECHPRO commercial and industrial fans meet or exceed all relevant Australian design standards.
Depend on the durability and reliability of our TECHPRO range for even the toughest workplace conditions.
get blown away by the power of our fans Specifications 762P/3K FS65P/3K
Speeds Available 3 3
Maximum Speed (r.p.m) 1380 1380
Watts 280 220
Noise (dB) 78 68
Air Delivery m3/min 300 230
AMPs 1.35 0.95
Specifications OB-16
Speeds Available 3
Maximum Speed (r.p.m) 1180
Watts 55
Noise (dB) 60
Air Delivery m3/min 75
AMPs 0.21
Specifications D12W30/K D16W40/K
Speeds Available 3 3
Maximum Speed (r.p.m) 1250 1180
Watts 45 55
Noise (dB) 50 60
Air Delivery m3/min 40 60
AMPs 0.16 0.21
TECHPRO- Floor Fans
FE45X/K Floor Fan 450mm - 3 SpeedFE50X/K Floor Fan 500mm - 3 Speed
Specifications FE45X/K FE50X/K
Speeds Available 3 3
Maximum Speed (r.p.m) 1380 1380
Watts 180 240
Noise (dB) 62 64
Air Delivery m3/min 124 142
AMPs 0.9 1.1
TECHPRO - Wall Fans
FB65/3K Wall Fan 635mm Oscillating Air - 3 Speed762W/3K Wall Fan 750mm Oscillating Air - 3 Speed
Specifications FB65/3K 762W/3K
Speeds Available 3 3
Maximum Speed (r.p.m) 1380 1380
Watts 220 280
Noise (dB) 68 78
Air Delivery m3/min 230 300
AMPs 0.95 1.35
page 7
Lenco - Window Exhaust Fan (with ball bearing motor)
E7WM 175mm Window Fan (whole cut out 213mm)E8WM 200mm Window Fan (whole cut out 237mm)E10WM 250mm Window Fan (whole cut out 265mm)
Effective alternative in buildings where ceiling fans cannot be used. Specially manufactured for long life, it can be installed quickly and economically in windows with a minimum glass thickness of 4mm.
exhaust fans
Lenco - Fan (with ball bearing motor)
E8PBB 200mm (8”) Ceiling Exhaust FansE10PBB 250mm (10”) Ceiling Exhaust Fans
Lenco - Turbo Fan with 2 Speed Motor, Normal or Boost (with ball bearing motor)
E10TS 250mm (10”) Ceiling Exhaust Fans
Approved for use in shower recesses and similar restricted areas.
Omega’s extensive range of exhaust fans and accessories are all specially selected for their suitability in a variety of environments. This ensures the fan invested in today will continue to provide comfort for many years to come.
peace of mind for now and the future
Specifications E7WM E8WM E10WM E7WM-DD E10WM-DD
Area A (ref diagram) 267mm 267mm 337mm 267mm 337mm
Area B (ref diagram) 150mm 140mm 177mm 150mm 177mm
Type C (hole, ref diagram) 213mm 237mm 270mm 213mm 270mm
Area D (ref diagram) 28mm 33mm 25mm 28mm 25mm
Area E (ref diagram) 260mm 295mm 345mm 270mm 345mm
Air Movement 205m3/HR 261m3/HR 480m3/HR 205m3/HR 480m3/HR
AMPs 0.20 0.32 0.40 0.20 0.40
Watts 22 40 46 22 46
Ball Bearing Motor and Continuous Running
Yes Yes Yes Yes Yes
Specifications E8PBB E10PBB
Area A (ref diagram) 267mm 337mm
Area B (ref diagram) 105mm 102mm
Type C (hole, ref diagram) 241mm 295mm
Area D (ref diagram) 15mm 15mm
Air Movement 284m3/HR 568m3/HR
AMPs 0.16 0.27
Watts 24 36
Ball Bearing Motor and Continuous Running
Yes YesLenco - Skylight Exhaust Fan (with ball bearing motor)
E7WM-DD 175mm Skylight FanE10WM-DD 250mm Skylight Fan
Helps maintain air freshness while keeping the walls and dome of the skylight cleaner. The fan is simple to install in both glass and acrylic skylights.
Installation Advice• For an exhaust fan to perform at maximum efficiency, the key requirement is a balanced airflow. This will encourage a “cross breeze” which is essential to clear either vapor or odors.
• If a wall or window fan is installed, it should be as high as possible.
• Do not position the fan close to air inlets, as this will encourage the fan to draw air from this source first.
Correct Positioning Wrong Positioning
Lenco - Fan Light
E8FL 210mm Fanlight (up to 100 Watt)
Both an exhaust fan and a light, ideal for bathrooms, toilets, laundries and kitchens. Approved for globes up to 100W, it can be installed with the fan and light operating either together or separately.
Specifications E8FL
Area A (ref diagram) 315mm
Area B (ref diagram) 125mm
Type C (hole, ref diagram) 265mm
Area D (ref diagram) 90mm
Air Movement 265m3/HR
AMPs 0.22
Watts 30
Ball Bearing Motor and Continuous Running
Yespage 9
exhaust fans and accessories
Lenco - Wall Exhaust Fans (with ball bearing motor)
E6WF 150mm Fan - For walls 100mm to 300mm thickE8WF 210mm Fan - For walls 100mm to 300mm thickE10WF 250mm Fan - For walls 100mm to 300mm thickE8GM 210mm Fan - For walls 45mm to 90mm thickE10WF 250mm Fan - For walls 70mm to 130mm thick
Specifications E6WF E8WF E10WF E8GM E10GM
Area A (ref diagram) 210mm 290mm 337mm 290mm 3341mm
Area B (ref diagram) 300mm 300mm 300mm 90mm 130mm
Area C (ref diagram) 110mm 110mm 110mm 45mm 70mm
Area D (ref diagram) 14mm 36mm 15mm 36mm 28mm
Area E (ref diagram) 220mm 302mm 395mm 302mm 395mm
Area F (ref diagram) 19mm 30mm 9mm 30mm 31mm
Area G (hole DIA ) 155mm 245mm 275mm 245mm 275mm
Air Movement 132m3/HR 240m3/HR 480m3/HR 240m3/HR 480m3/HR
AMPs 0.35 0.32 0.43 0.27 0.40
Watts 40 45 55 36 52
Ball Bearing Motor and Continuous Running
Yes Yes Yes Yes Yes
Can be installed quickly and economically in solid brick, brick veneer or timber walls. Models E6WF, E8WF, E10WF and E12WF are suitable for walls 110-130mm thick by use of a telescopic duct included with each fan. Model E8GM is for walls 45-90 thick, E10GM is for walls 70-130mm thick.
the latest whisper quiet efficiency
Lenco - Metal Fan (with ball bearing motor)
E7M 175mm Metal FanE8M 200mm Metal FanE10M 250mm Metal FanE12M 300mm Metal Fan
Its all-metal, long-life construction is heat-resistant.Ideal near stoves, the E12M model is particularly suited to large applications.
Specifications E7M E8M E10M E12M
Area A (ref diagram) 256mm 292mm 332mm 389mm
Area B (ref diagram) 120mm 117mm 135mm 148mm
Type C (hole, ref diagram) 195mm 235mm 270mm 325mm
Area D (ref diagram) 7mm 7mm 8mm 7mm
Air Movement 224m3/HR 330m3/HR 454m3/HR 666m3/HR
AMPs 0.35 0.35 0.40 0.57
Watts 40 40 52 80
Ball Bearing Motor and Continuous Running
Yes Yes Yes Yes
Vapotec - Hi - Flow, Ducted Exhaust Fan
VX130 Hi-Flow Exhaust Fan Complete with 3M Ducting & Grill Roof, Eaves or Wall Mounting
Extract steam and clear the air quickly and quietly. Industrial quality components provide superior air flow and exceptional durability, which combined with innovative features such as the patented anti-water intrusion system make the VX130 Hi-Flow Fan ideal for domestic or commercial installation.
Vapotec - Steam Sensor
VTSOR Vapotec Hard Wire Steam Sensor (electrician required for installation)
Remarkably simple, but ingenious electronic device designed to automatically turn your bathroom exhaust fan on when it senses the presence of steam. When all steam is cleared from the room Vapotec then automatically turns your fan off.
page 11
Lenco - Metal Tone FansMetal surround available in a chrome and white finish (with ball bearing motor)
E10MT- CH 250mm ChromeE10MT - WH 250mm White
Smart, low-profile design enables it to hug the ceiling in unobtrusive yet stylish fashion. Powerful quiet ball bearing motor delivers all the performance you’ll ever need.
Chrome
White
Also available in:
Specifications E10MT-CH/WH
Area A (ref diagram) 360mm
Area B (ref diagram) 102mm
Type C (hole, ref diagram) 295mm
Area D (ref diagram) 15mm
Air Movement 568m3/HR
AMPs 0.27
Watts 36
Ball Bearing Motor and Continuous Running
Yes
3 in 1 bathroom and draftstoppa units
page 13
steam free when you need it most
O’Air - Heat Lamp with Exhaust
HLE4 2x 275 watt heat lamp 100 watt reflector globe 3m duct Wall mounted switch Side mounted exhaust fan 3 year warranty
O’Air - 4 in 1 Heat, Light and Inline Fan with Ducting
FH707CP 2x 275 watt heat lamp for rapid warmth 100 watt reflector globe 3m duct Wall mounted switch Quiet fan due to ceiling cavity installation External grill may be painted over 3 year warranty
Powerful, exhaust fans extracts mist that can cause mould and dampness and expels it outside your home.
Specifications HLE4 FH707CP
Motor 230-240VAC 50Hz 0.20AMPs
230-240VAC 50Hz 0.4 AMPs
Motor Instulation Class H B1
Total Motor Watts 23 40
Motor Protection Thermally Protected Thermally Protected
Total Product Watts 675 690
Airflow Rating (through 3m ducting)
190m3/HR 238m3/HR
Ceiling Cutout Size 361x161mm 361x161mm
Fits into tight spaces - i.e. between the floors of a two story building
Specifications FH705
Motor 230-240VAC 50Hz 0.24AMPs
Motor Instulation Class H
Total Motor Watts 25
Motor Protection Thermally Protected
Total Product Watts 675
Airflow Rating 385m3/HR
Ceiling Cutout Size 361x161mm
O’Air - 3 in 1 Heat, Light and Fan Unit
FH705 Powerful fan motor due to blade pitch design Directly fits 150mm ducting 2x275 watt heat globes 100 watt reflector light 3 way wall mounted switch Rapidly heats and extracts steam Simple to duct All parts included 3 year warranty
Powerful, exhaust fan extracts mist that can cause mould and dampness, two 275 watt heat globes provide instant heat and a 100 watt reflector bulb lights your bathroom in summer or winter.
page 13
COMING SOON COMING SOON
Lenco Ductoaire Ducted Draftstoppa Exhaust Fan
DA200 200mm / 8” Exhaust fan DA250 250mm / 10” Exhaust fan Comes with outside louvre and 6mtrs ducting included Availalabe in 200mm and 250mm sizesExceeds building code AS1668.2 minimal flow rate performance Retro fit to existing 8” or 10” round ceiling exhaust cavitiesCan be fitted into confined spaces and linked to 150mm ductMinimum air movement 220m3/hr. Enclosed ball bearing motor.
Lenco Ductoaire is an innovative self-sealing energy efficient exhaust fan for areas such as bathroom, laundry and kitchen. Ductoaire has tested, proven performance, not idle claims. This means efficient extraction and energy usage. Engineered to be the best.
Specifications DA200 DA250
Voltage 240V 50HZ 240V 50HZ
Wattage 35 39
Air Movement 216m3/hr (at outlet, with use of 3m duct)
233m3/hr (at outlet, with use of 3m duct)
Dimension 200mm 250mm
Protrusion into Roof 200mm 250mm
Duct 150mm Ø x 3m 150mm Ø x 3m
Plug and Lead 800mm 800mm
Eave Vent 180mm x 180mm 180mm x 180mm
Lenco - Round Diffuser
DIFF150 150mm Diffuser DIFF200 200mm Diffuser DIFF250 250mm Diffuser
Lenco - Insulated Ducting
ID1503 150mm Insulated Flexible Duct x 3 metresID1006 150mm Insulated Flexible Duct x 6 metresID2003 200mm Insulated Flexible Duct x 3 metresID2006 200mm Insulated Flexible Duct x 6 metresID2503 250mm Insulated Flexible Duct x 3 metres
Lenco - Rear Louvre
RL1501 150mm Rear Louvre RL2001 200mm Rear Louvre RL2501 250mm Rear Louvre
Lenco - Double Branch Take off
DJBTO666 Branch Take Off 150x150x150DJBTO886 Branch Take Off 200x200x150DJBTO10108 Branch Take Off 250x250x200DJBTO1088 Branch Take Off 250x200x200DJBTO10866 Branch Take Off 250x200x150x150
Lenco - Y Junction
DJY666 150x150x150 Y Junction DJY866 200x150x150 Y Junction DJY888 200x200x200 Y Junction DJY1088 250x200x200 Y Junction DJY101010 250x250x250 Y Junction
Lenco - Reducer
RED86 200MM to 150MM Reducer RED108 250MM to 200MM Reducer
page 11Lenco - Egg Crate Grilles
ECG150SQ 150mm Egg Crate Grille SquareECG200SQ 200mm Egg Crate Grille SquareECG200R 200mm Egg Crate Grille RoundECG250SQ 250mm Egg Crate Grille SquareECG250R 200mm Egg Crate Grille Round
fans, ventilation and accessories
Lenco - Draftstoppa
EDS-1 Seals exhaust fans so no warm/cool air escapes. Simple to install. 5 star energy rating. Prevents polluted air or cooking smells from entering. Does not load up the exhaust fan motor. Simple to install.
Lenco - In Line Fans (with ball bearing motor)
PD150D 150mm (6”) Air Shifter 238 Cubic MTRS/HRAS2001 200mm (8”) Air Shifter 520 Cubic MTRS/HRAS2002 2 Speed - Air Shifter High 520 Low 370AS2501 250mm (10”) Air Shifter 876 Cubic MTRS/HR
D
CB
A
A
B
A
B
AB
C D
A
B
A
A
CB
D
A
CB
D
Specifications AS2001 AS2002 AS2501
Area A (ref diagram) 195mm 195mm 245mm
Area B (ref diagram) 280mm 280mm 280mm
Air Movement - High 520m3/HR 520m3/HR 876m3/HR
Air Movement - Low - 370m3/HR -
AMPs - High 0.46 0.46 0.55
AMPs - Low - 0.3 -
Watts - High 60 60 75
Watts - Low - 35 -
D
CB
A
A
B
A
B
A B
C
D
A
B
A
A
CB
D
A
CB
D
D
CB
A
A
B
A
B
A B
C
D
A
B
A
A
CB
D
A
CB
D
Specifications ECG150SQ ECG200SQ ECG200R ECG250SQ ECG250R
Area A (ref diagram) 150mm 200mm 200mm 250mm 250mm
Area B (ref diagram) 140mm 140mm 105mm 140mm 120mm
Type C (ref diagram) 5mm 5mm 5mm 5mm 9mm
Area D (ref diagram) 180mm 230mm 255mm 330mm 330mm
200mm EGG CRATE GRILLE
150mm EGG CRATE GRILLE
D
CB
A
A
B
A
B
A B
C
D
A
B
A
A
CB
D
A
CB
D
Specifications DIFF150 DIFF200 DIFF250
Area A (ref diagram) 150mm 200mm 250mm
Area B (ref diagram) 120mm 120mm 120mm
Type C (ref diagram) 15mm 15mm 15mm
Area D (ref diagram) 270mm 320mm 390mm
D
CB
A
A
B
A
B
A B
C
D
A
B
A
A
CB
D
A
CB
D
Specifications RL1501 RL2001 RL2501
Area A (ref diagram) 200mm 300mm 394mm
Area B (ref diagram) 200mm 300mm 394mm
200mm/250mm Rear Louvre
150mm Rear Louvre
Lenco - Flexible Ducting
FD1003 100mm Alum Flexible Duct x 3 metresFD1006 100mm Alum Flexible Duct x 6 metresFD1253 125mm Alum Flexible Duct x 3 metresFD1256 125mm Alum Flexible Duct x 6 metresFD1503 150mm Alum Flexible Duct x 3 metresFD1506 150mm Alum Flexible Duct x 6 metresFD2003 200mm Alum Flexible Duct x 3 metresFD2006 200mm Alum Flexible Duct x 6 metresFD2503 250mm Alum Flexible Duct x 3 metresFD2506 250mm Alum Flexible Duct x 6 metres
page 15
Axial Flow FansThese are exhaust fans which move large volumes of low pressure air in window, wall or in-line applications. When using an axial flow fan, air must always be drawn or pulled along the duct.
Centrifugal Exhaust FansThese are exhaust fans which move limited volumes of high pressure air through long ducts and overcome the resistance of curves, narrow areas and internal irregularities.
Determining Fan CapacityTo determine the capacity of the fan required, use the following equations and refer to the chart:
Room’s m3 ÷ Fan’s Air movements per HR = No. Changes performed by fan
eg: 9m3 (typical toilet) ÷ In-line fan PD150 (238m3/HR)= 26.4 No. changes per hour (and therefore not suitable)
Room Type Required No. Changes Per Hour
Bathroom 15-20
Bedroom 2-5
Canteen/Tuck Shop 5-10
Factories 10-15
Hairdresser 10-15
Hotel Bar 10-15
Kitchen 15-20
Laundry 10-15
Living Room 3-6
Offices 5-10
Restaurants 8-15
Shops 5-10
Theatres 6-8
Toilet 35-40
Waiting Rooms 7-8
Warehouses 5-10
Ducted Exhaust Fan Kits
P150DK2 Air Transfer Kit:6m duct 200mm int. grill, 200 to 150 reducer, 150mm ext. louvre, tape
ATK1501 Air Transfer Kit:1x150mm in-line fan, 6mx150 mm 4-0 fire rated duct, 2x150mm round diffuser, & 30m duct tape
ATK1502 Air Transfer Kit : 1x 150mm in-line fan, 2x6mx150mm 4-0 fire rated duct, 3x150mm round diffuser, 1Y-junction & 30m duct tape
ATK2001 Air Transfer Kit : 1x200mm in-line fan, 6mx200mm 4-0 fire rated duct, 2x200mm round diffuser, & 30m duct tape
ATK2002 Air Transfer Kit :1x200mm in-line fan, 1x6mx200mm, 1x6mx150mm 4-0 fire rated, 1x200mm 2x150mm round diffuser, 1Y-junction & 30m duct tape
DS1501 Ducted Exhaust System : 1x150mm in-line fan, 6x150mm 4-0 fire rated duct, 1x150mm egg crate grille, 1x rear louvre & 30m duct tape.
ITK1501 Air Transfer Kit : 1x150mm in-line fan, 6mx150mm 4-0 fire rated insulated duct, 2x150mm round diffuser, & 30m duct tape
ITK1502 Air Transfer Kit :1x150mm in-line fan, 2x6mx150mm 4-0 fire rated insulated duct, 2x150mm round diffuser, 1 Y-junction & 30m duct tape
ITK2001 Air Transfer Kit : 1x200mm in-line fan, 6mx200mm 4-0 fire rated insulated duct, 2x200mm round diffuser, & 30m duct tape
ITK2002 Air Transfer Kit : 1x200mm in-line fan, 1x6mx200mm, 1x6mx150mm 4-0 fire rated insulated duct, 1x200mm, 2x150mm round diffusers, 1 Y-junction & 30m duct tape.
RFK1501 Roof Fan Kit : 1x150mm roof fan, 3mx150mm 4-0 fire rate duct, 1x150mm egg crate grille & 30m duct tape
RFK2001 Roof Fan Kit : 1x200mm roof fan, 3mx200mm 4-0 fire rate duct, 1x200mm egg crate grille & 30m duct tape
ducted kits and fans
bringing you the brands that matter:
Exhaust Options
Heat Transfer Options
Air Transfer Kit
Exhausting directly outside through a flat or low pitched roof.
Roof Exhaust Kit
For exhausting moist air from bathrooms, laundries or kitchens straight outside
Dual Roof Exhaust Kit
Ideal for exhausting two rooms which are close together.
Air Exhaust Kit
Ideal for exhausting through eave or wall.
Air Transfer Kit
Ideal for transferring heat from one room to another. Available in insulated and uninsulated duct.
Air Transfer Kit
Transferring heat from one room to two other rooms. Available in insulated and uninsulated duct.
Lenco - Roof Fans (with ball bearing motor)
RFD1501 150mm (6”) Roof Fan (with dome)RFD2001 200mm (8”) Roof Fan (with dome)
D
CB
A
A
B
A
B
AB
C D
A
B
A
A
CB
D
A
CB
D
Specifications RFD1501 RFD2001
Area A (ref diagram) 152mm 192mm
Area B (ref diagram) 610mm 585mm
Type C (hole, ref diagram) 60mm 100mm
Area D (ref diagram) 260mm 275mm
Air Movement 192m3/HR 330m3/HR
AMPs 0.27 0.46
Watts 30 60
Ball Bearing Motor and Continuous Running
Yes Yes
solutions that let you get on with living
QUEENSLAND56 Basalt Street, Geebung, 4034 Ph: (07) 3216 2799Fax: (07) 3216 5902
NEW SOUTH WALESUnit 1/18 Kelso Crescent, Moorebank, 2170 Ph: (02) 9734 9944Fax: (02) 9734 9933
VICTORIA (HEAD OFFICE)47 Bennet Street, Dandenong, 3175 Ph: (03) 9793 6111Fax: (03) 9792 4509
WESTERN AUSTRALIAUnits 8-9/53 Belmont Avenue, Belmont, 6104 Ph: (08) 9475 0777Fax: (08) 9475 0788
SOUTH AUSTRALIA86 Welland Avenue, Welland, 5007 Ph: (08) 8340 9200Fax: (08) 8340 9211
sales [email protected] omegapower.com.au
Proudly distributed by: