al habtoor city, 3 residential towers, dubai, uaeb_al_habtoor_uae_201… · al habtoor city, 3...

2
SIKA AT WORK AL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAE INDUSTRY: Sikasil® SG-18, Sikasil® IG-25, Sikasil® SG-500 CN, SikaGlaze® GG-735 SEALING & BONDING: SikaHyflex®-305 EU

Upload: others

Post on 17-May-2020

8 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: AL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAEB_Al_Habtoor_UAE_201… · AL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAE PROJECT DESCRIPTION The project involves the construction

SIKA AT WORKAL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAEINDUSTRY: Sikasil® SG-18, Sikasil® IG-25, Sikasil® SG-500 CN, SikaGlaze® GG-735SEALING & BONDING: SikaHyflex®-305 EU

Page 2: AL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAEB_Al_Habtoor_UAE_201… · AL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAE PROJECT DESCRIPTION The project involves the construction

AL HABTOOR CITY, 3 RESIDENTIAL TOWERS, DUBAI, UAE

PROJECT DESCRIPTION

The project involves the construction of 3 luxury residential towers, comprising two 74-storey towers and one 52-storey tower, along with a 7-storey podium including a basement, a ground floor and five floors of retail and car park with over 2,000 spaces.

The project will o�er 1,460 apartments and 11 penthouses with exclusive leisure facilities for residents that will include swimming pools, a gym and spa, shops, cafes, supermarket and clinics.

PROJECT REQUIREMENTS

Sika specified the structural glazing adhesive Sikasil® SG-500 CN and Sikasil® SG-18 for the glass to aluminium bonding, Sikasil® IG-25 as secondary edge seal of insulating glass, SikaHyflex®-305 EU for weather sealing and SikaGlaze® GG-735 for glass balustrade.

Sika's successful involvement in this landmark project is largely due to the very good relationship with ALUMCO LLC, our well established technical service centre allowing a fast response time and our unique Middle East laboratory based in Dubai.

SIKA SOLUTION

� Sikasil® IG-25 is used as a secondary seal for manufacturing insulating glass units.

� Sikasil® SG-500 CN is used for bonding the insulating glass unit to the aluminium frame during the manufacturing process in the factory.

� Sikasil® SG-18 is mainly used for onsite repair work to bond the replacement glass on to the aluminium frame.

� SikaHyflex®-305 EU is used as a sealant between the panels to fill the gap.

� SikaGlaze® GG-735 is used as a grout for balcony glass embedding.

PRODUCTS USED

� Sikasil® IG-25

� Sikasil® SG-500 CN

� Sikasil® SG-18

� SikaHyflex®-305 EU

� SikaGlaze® GG-735

PROJECT PARTICIPANTS

CLIENT: Al Habtoor Leighton Group

MAIN CONTRACTOR: Al Habtoor Leighton Group

SUB-CONTRACTOR: Alumco LLC

ARCHITECT: WS Atkins & Partners

SUPPLIER: Sika UAE L.L.C

Our most current General Sales Conditions shall apply. Please consult the Data Sheet prior to any use and processing.

SIKA UAE LLCP.O.Box 126212Dubai United Arab Emirates

ContactTel: +971 4 439 8200Fax +971 4 439 3606gcc.sika.com