,~, Motorcycle alarm system instruction(3-Button12-Bu'tton 6V)

Introduction

Arming Button @Normal state: press button to arm the motorcycle in alarm modeNormal state: press button one second or twice into mute.:arming modeDriving state: Press button to exceed safelyChirping state: Press the button once, stop chirping and return tbarming modeDisarming Button cJ'Arming state: press button to disarm the motorcycle temporarily. Press the button I second or press ittwice, disarm the motorcycle completely,Driving State: Press button to stop the engine and disaJin the alarm system. 'Chirping State: press button to stop chirping tem-porarily and return to arming mode.

VEHICLE FINDING Button V.~

I in anning arming mode, press lock button one time, the siren will make five sound flld flashing light flash five timesin the game time for locating the vehicle in the large parking lot. .In the disarming state or arming state, press vehicle fmding button. the siren make 5 sound and flashing light flash fivetimes in the same time for locating the vehicle in the large parking lot..

Instruction of functionsArming: Shut down the motorcycle and take the key out, press the arming button, the siren will chirponce, the direction light will flash once, the system turns into arming mode automatically in 3 seconds;Mute arming: Press the arming button fo~ 1 seconds or twice, the lights' will flash once and the siren willchirp once, and then the lights will flash once again, the system enter into mute anniIlg mode.A. Pre-:-alarm: when by touched, the siren wiU chirp 5 times, the direction light will flash 5 times

simultaneously;( in the mute alann mode, the siren will not chirp)B. Alarm: within 15 seconds after pre-alarming, a second touch will make the siren chirp sharply for 15

seconds, the light will not flash., the engine is cut-off and could not start.Immobilizing engine: in arming state, if someone try toturn ACC ON, the siren will chirp sharply and theJj.a:..~twill flash for 15 seconds, the engine will be immobilized automatically and will not be started. Press

~~...--.-Juttonto stop it, the system will return to alarm mode agaih. Press disarming button to release it.Overtaking on the road: in driving state, press m button, the light will flash 24 times, press any buttonto stop flashing;( for 2 buttons remote only)

In driving state, press Vbutton, the light will flash 24 times, press any button to stop flashing;( for 3 buttons remote

only)

Stop siren temporary: press arm or disarm or panic button to make chirp disable temporarily, and themotorcycle returns to arming mode; Press disarm for 1 second to stop siren and disarm the system.Automatic rearming: in arming mode, press button unintentionally, the siren will 1 time and the lightwill flash twice, the system is disarmed temporialy. If nobody turn ACC ON within 25 seconds, the lightwill flash once and the system will return to the arming mode automatically. This function can avoid thefalse disarming.Disarming completely: in arming state, press button for 1 second or press it twice, the siren will chirp twiceand the direction light will flash forth simul-taneously. The system will be disarmed completely.Stop engine w!th remote controller: In driving state, press disarm button once, the engine will stop atonce.Warning to disarming state: 10 seconds after the motor-cycle parked, if the system is not armed, the sirei'will chirp twice and the direction light will flash simul-taneously to warn YOU to arm the system.

will return to the fOImer state as soon as the power is supplied. .Anti-hi,jacking-: When driving, press arm button for 2 seconds, the siren will sound sharply and the engine'will be cut-off after 10 seconds. Then the siren will keep on and the lights flash quickly. Press disarm buttonto stop it. ( for 2 button remote control only)When driving,press panic button for 2 seconds, the siren will sound sharply and the engine will be cut-offafter J 0 seconds. Then the siren will keep on and the lights flash quickly. Press disarn1 button to stop it( for3 button remote control only)Function setting:JP2: Short circuit: 2 button remote control

Open circuit: 3 button remote controlJP3: Short circuit: 4-tone siren

Open circuit: I-tone sirenCode learning procedure:Prcss the learning swith on the main unit for 2 seconds, the lights will flas!1 3times and then keep on, the system enter into learning mode: press any button of the remote control within 3seconds, the lights will fla.<;h3 times and then keep on, indicating that the remote has been learnt into thesystem sucessfully. 4 remote controls can be learnt in the same time. If the remote control is learnt, all theold remote control is cleared from the system for safety reason, they have to learn it again.AttentionsPlease replace the battery of remote controller when the remote controlling distance becomes shorter and theJightofthe remote controller becomes darket.

/