alat lab tambahan 2

For enguiries or placing of orders please contant :

Jadi Jaya LaboratoryJl. Joyo Utomo VII/514B Malang / Jl. MT. Haryono 79 Malang

Telp : 0341-557491/559914, Fax : 0341-557491/559914Website : www. jadijayalab.com

Introduction

Dear Our Valued Customer, It’s the time for us to present you our new edition of INFOCUS 2012.We would like to thank you for your continuous good support and hopefully our selected rangeproduct meet your exact requirements. Thank you. Your sincerely,Jadi Jaya Laboratory Page:01 Introduction and Table Cntent02 Table of Content

1. General Equipment:

03 Carbolite Chamber Furnaces, High Temperature Tube Furnace

04-05 Christ Freeze Dryer, Rotational Vacuum Concentrator06 Elma Ultrasonic Cleaners07 Eppendorf Pipette, Tips, Buret08-09 Hamilton Microsyringe10 Huber Cooling Circulator, Minichiller11-16 IKA Magnetic Stirrer & Hot plate, Shaker, Ultra turrax, Dispersers,

Overhead Stirrer, Rotary Evaporator17-19 KEM Automatic Titrator, Refractometer, Moisture Titrator,

Densitymeter20 Kern Balance21 Kruss Polarimeter, Melting Point22 Lancer Glassware Washer-Dryer23-25 Memmert Climate Test Chamber, Cooled Incubator, Storage Chamber, Waterbath26 M-Tops Heating Mantle27-28 Schott pH Meter, Conductivity Meter, Oxygen Meter29-33 Thermo Scientific Visible/UV-Vis Spectrophotometer, Centrifuge34 Tintometer GmbH BOD Meter, BOD Incubator, COD Meter, Turbidity Meter35 Thermo Scientific - TKA Water Purification System36-39 Vacuubrand Vacuum pump40 Waring Laboratory Blender40 WLD tec Gas Burner

Table of Content

Table of Content

2. Pharmaceutical & life Science

41-42 Agilent Bioanalyzer, Real Time PCR, Microarray Scanner, Hybridiza

tion Oven, Electrophoresis 43-45 Biotek Spectrophotometer, Microplate Reader46 Bullard Personal Protective Equipment47 Carestream Molecular Imaging48 Chemometec Nucleo Counter49-50 Distek Dissolution System, Disintegration51-55 GE Healthcare AKTA Purifier, AKTA avant, Biacore, Bioreactor, Electropho

resis System, Isothermal Titration Calorimetry56 Miltenyi Biotec Cell Dissociator & Homogenizer, Automatic Cell Separator,

Automatic Cell Analyzer57-58 NBS Ultralow Freezer, CO2

Incubator, Fermentor & Bioreactor,Shaker

59 Primus Sterilizer60 Statebourne Liquid Nitrogen Tank61 Tecniplast Animal Facility Equipment62-64 Thermo Scientific Nanodrop65-66 Thermo Scientific Freezer, Biological safety

3. Food & Agriculture

67 Elementar Elemental Analysis68 Funke Gerber Colony Counter, Lactostar, Centrifuge Nova Safety69-70 Hirayama Autoclave71 IKA Calorimeter System72 Hunterlab Colormeter73 Interscience Bagmixer, Colony Counter, Gravimet, Autoclave deodorant74 Tintometer UK Colormeter

4. Material Research 75 Ametek Potentiostat/galvanostat76-79 Retsch Sieve Shaker, Jaw Crusher, Cyclone Mills, Knife Mill, Mixer

Mill, Planetary Ball Mill80 Setaram Thermal Analyzer

Pharmaceutical & Life Science

Lab on a chip, Microfluidic Electrophoresis for DNA, RNA and Protein BIOANALYZER 2100

FeaturesFaster than gels – analyze 10-12 samples in 30- 40 minutes Easy to use – load the chip, press "start“, the instrument does the rest Ready-to-use assays and pre-packaged reagent kits Reproducible data, contamination-free hardware Quick and easy sample comparison – one-click overlay, scaling or zooming features Reproducible, complete and digital data Easy handling, storage and exchange of digital data Safety, no EtBr used

Specifications:

Includes: Electrophoresis Cartridge + License, Laptop (Core 2 Duo), Vortex,Software

REAL TIME PCR INSTRUMENTSTRATEGENE -MX 3005P

Specifications:

Sample capacity Standard 96-well plates, 0.2 ml 8-strip tubes or individual tubesDimensions and weight WDH (cm) :33 x 46 x 43 and 20 kg

Sample volume 10-60 µl

Fluorescence excitation Quartz tungsten-halogen lamp, 350-750 nm range, Five-position filter wheel

Fluorescence detection Single photomultiplier tube (PMT), 350-700 nm rangeFive-position filter wheel

Number of optical channels Customizable filter wheels with five (5) user-selected excitation/emission filter sets

Filters available Alexa Fluor® 350, FAM™/SYBR® Green I, TET™, HEX™/JOE™/VIC™, Cy™3, TAMRA™, ROX™/Texas Red®, Cy™5

Thermal uniformity +/- 0.25°C within 12 seconds at 72°C

Thermal block ramp rate Up to 2.5°C/second

Thermal system Solid state, Peltier-based, 96-well block thermal system

Multi-instrument control Up to 6 instruments simultaneously from one computer

Multiplex Up to Five targets (Mx3005P™ System) simultaneously user-selected filter set

Weight 10 kg (22 lbs)Dimensions (w × d × h) 162 × 412 × 290 mm (6.4 × 16.2 × 11.4 in)Line voltage 100-240 VACLine frequency 50-60 HzPower consumption 60 VAAmbient operating temperature 5-40 °C (41-104 °F)

Safety standards: IEC, CSA, UL Installation category II, Pollution Degree 2


MICROARRAY SCANNER Specification: DynamicRange : 104 (16-bit data format), 105 (20-bit data

format), 106 (with XDR scanning) Dynamic AutoFocus : Continually adjusts scanner's focus,

keeping features in focus at all times Autoloader : 48-slide carousel allows for hands-off operation Compatible Dyes : Cyanine 3 and Cyanine 5, and Alexa 647,

555, and 660 Scan Window Maximum : 21.6 mm x 71 mm Detection Limit : 0.05 chromophores per square micron Pixel Placement Error : 1 pixel @ 5 micron resolution Scan time : 2-color simultaneous data acquisition in 15

minutes per for 3 micron scans a micron scans (scan region of 61 mm x 21.6 mm)

Data Workstation and Operating System : PC-based with Windows® XP ; Data Analysis Software - 2 perpetual licenses of Agilent Feature Extraction included.

DNA Microarray Hybridization Oven

Specification:Rotator Motor Speed : 2 to 20 RPM Oven Dimensions (HWD): 22.0" (55.8 cm) x 17.4" (44.5 cm) x 17.75" (39.5 cm)Chamber Dimensions (HWD): 14.5" (36.8 cm) x 12.5" (31.8 cm) x 12.0" (30.5 cm) Operating Temperature Range :

Ambient + 5° to 70°C (+/- 0.1°C) Weight : 75 lbs (34.0 kg) Power Input : 110-120 Volts, 220-240 Volts

ISO ELECTRIC FOCUSING ELECTROPHORESIS 3100 Offgel

Specifications: Weight:14 kg (31 lbs) Dimensions (HWD):157 × 355 × 427 mm Line voltage :100 – 240 VAC, ±10% Wide ranging capability Line frequency: 50 – 60 Hz, ±5% Power consumption :140 VA Ambient operating temperature :5 – 40 ºC Humidity :< 80% at 40° C (104 °F) Non-condensing Platform temperature 10 ºC – 35 ºC


Epoch Multi-Volume Spectrophotometer System

One System.... More Choices.... More Assays....Quantify up to sixteen 2 μL volumes of DNA, RNA and proteinsObtain quick 260/280 ratios in 2 μL samples or in a microplateSelect individual wavelengths from 200 – 999 nm without purchasing filtersPerform rapid qualitative or quantitative analysis in microplates from 6- to 384-wellsSave space on the benchtop with its very small footprintMonitor cell growth using the Epoch’s well scanning capabilityRun spectral scans of 2 μL samples, or samples contained in a microplate, standard cuvette or the patented BioCell quartz CuvetteMeasure kinetic rates of reactionValidate the miniaturization of your assay…from a full cuvette to a microplate to a microvolume…on one systemRun multiplex assays quickly and easily

Epoch Microplate Spectrophotometer: comes with Gen5, Take3 Multi-Volume Plate and Gen5 Take3 Module

SPECIFICATION:General Read method : Endpoint, kinetic, spectral scanning, well area scanning Microplate types : 6-, 12-, 24-, 48-, 96- and 384-well plates, Take3 plate Absorbance Wavelength range : 200 nm - 999 nm, selectable in 1 nm increments Bandpass : 5 nm Dynamic range : 0 to 4.0 OD Resolution : 0.0001 Monochromator wavelength accuracy : ±2 nm Monochromator wavelength repeatability : ±0.2 nm OD accuracy : 0.0 to 2.0 OD: ±1% ±0.010 OD

2.0 to 2.5 OD: ±3% ±0.010 OD OD linearity : 0.0 to 2.0 OD: ±1% ±0.010 OD

2.0 to 2.5 OD: ±3% ±0.010 OD OD repeatability : 0.0 to 2.0 OD: ±1% ±0.005 OD

2.0 to 2.5 OD: ±3% ±0.005 OD Reading speed : 96-well Normal: 49 seconds

96-well Rapid: 38 seconds 96-well Sweep: 15 seconds Physical Characteristics Dimensions : 12”W x 12.5”D x 7.7”H

(30.5 x 31.7 x 19.5 cm) Weight : 14 lbs (6.35 kg)

http://www.biotek.com/products/accessories/?accid=10186


Synergy™ H1 Hybrid Multi-Mode Microplate Reader

Synergy™ H1 is a flexible monochromator-based multi-mode microplate reader that can be turned into a high-performance hybrid system with the addition of a filter-based optical module. The monochromator optics uses a third generation quadruple grating design that allows working at any excitation or emission wavelength with a 1 nm step. This system supports top and bottom fluorescence intensity, UV-visible absorbance and high performance luminescence detection. It is the ideal system for all the standard microplate applications found in life science research laboratories.

The filter module is a completely independent add-on that includes its own light source, and a high performance dichroic-based wavelength selection system. With its very high optical efficiency, this module supports advanced detection modes such as Fluorescence Polarization, Time-Resolved Fluorescence and filtered luminescence (e.g. BRET). A dual reagent injection system is available to automate inject/read assays such as ion channels assays or flash luminescence assays (e.g. luciferase or ATP assays).

SPECIFICATION:General Wavelength Selection : Hybrid Technology™ (patent-pending)Quadruple Monochromators and Filters / Dichroics Detection method : Monochromator system: Fluorescence, Luminescence, UV-Visible AbsorbanceFilter system: Fluorescence, Time-Resolved Fluorescence, Fluorescence Polarization, Luminescence Read method : End point, kinetic, spectral scanning, well-area scanning Microplate types : 1- to 384-well platesCompatible with Take3 Multi-Volume Plate with 2 µL microspots Temperature control : 45°C ±0.5 °C at 37°C4°C above ambient to 45°C, +0.5°C at °C Shaking : YesAbsorbance Wavelength range : 230 - 999 nm, 1 nm increment Bandpass : 4 nm (230-285 nm), 8 nm (>285 nm) Dynamic range : 0 - 4.0 OD Fluorescence Intensity Wavelength range : 200 - 700 nm (900 nm option) Dynamic range : 5 decades Luminescence Wavelength range : 300 - 700 nm Dynamic range : >6 decades Reagent Dispensers Dispense Precision : <2% at 50-200 µL Dispense Accuracy : ±1 µL or 2% Number : 2 syringe pumps


EL406 COMBINATION WASHER DISPENSER

Features : 1536-, 384- and 96-well microplates Magnetic and polysyrene microsphere assays ELISAs and cell-based assays High-energy neodymium iron boron magnets Selection of optimized field gradients within wells\ Rapid separation of micrometer and nanometer beads with superior retention Fast and efficient vacuum filtration Fast microplate washing and dispensing Patented Dual-Action™ wash manifold Up to three reagent dispensers Unattended operation for long and tedious liquid handling processes Smaller benchtop or robotic system footprint compared to separate washer and three dispensers BioStack™ compatible for automated processing of up to 50 standard height microplates\ Choice of software control from instrument keypad or Liquid Handling Control™ (LHC) PC software Built-in ultrasonic cleaner Automatic switching of up to four wash buffers or reagents

The EL406 Combination Washer Dispenser offers fast, full plate washing along with three reagent dispensers in one, compact instrument… all from the recognized industry leader. The EL406 is the latest advancement in 1536-, 384- and 96-well microplate washing and dispensing incorporating BioTek’s patented Dual-Action™ manifold, optimized washing for loosely adherent cell monolayers, built-in patent-pending Ultrasonic Advantage™ for unattended wash manifold maintenance and up to four wash buffers for complex wash routines.

BIOSTACK MICROPLATE STACKER

Microplate types : ANSI/SBS Standard and low profile 96-, 384- and 1536 well platesMicroplate orientation : Landscape and portrait Microplate capacity : 10-, 30- and 50- plate stacks are removable and interchangeable; Contain 10 or up to 50, 96- or 384-well plates per stack. Up to 75 1536-well plates with 50-plate stack option.Compatible BioTek Instruments : ELx405, EL406, MultiFlo, MicroFlo Select, MicroFill, Precision, PowerWave and Synergy Multi-Mode and Hybrid Microplate ReadersExternal Power Supply : Compatible with 100 - 240 V ±10% 50-60 Hz Consumption100 watts maximum


Protect your Respirator with EVA...............

EVA Powered Air-Purifying Respirator A complete EVA PAPR system consists of three components:1.EVA blower assembly with filter2.Respirator hood or loose-fitting facepiece with suspension3.Breathing tube assembly Applications: Healthcare, Pharmaceutical Manufacturing, Painting, Coatings and Grinding, Laboratory, Animal Science EVA (Evolutionary Air) represents the latest in cutting-edge Powered Air-Purifying Respirator (PAPR) technology designed to provide constant air flow in a compact, streamlined form for added customer comfort. Designed from input Bullard received from users and experts in the field, EVA’s ergonomic, lightweight design makes this PAPR evenly balanced to provide maximum comfort to the wearer.Equipped with an innovative Active Flow Technology™ system that automatically maintains constant air flow, EVA is always responding to a worker’s need for more or less air. This intelligent system is continuously working to maintain constant air flow, regardless of filter type, hood type, filter loading or battery capacity. Plus, EVA is equipped with an easy-to-read fuel gauge that lets the user quickly check the unit’s battery status. EVA is NIOSH approved and can be used with Bullard Tychem® hoods, Bullard GRH grinding hood and Spectrum® Series full facepiece. EVA’s features include:•Provides superior protection with a 1,000 Assigned Protection Factor (APF).•Two distinct audible alarms that notify wearers of low battery and low air flow. The sound from the

alarms travels through the breathing tube directly to the user’s ear.•A long-lasting 10,000-hour brushless motor that is designed for long-term reliable use.•A single combination filter for quick and easy installation.•Two-speed blower so the user can choose more or less cooling and air flow.•Filter locking tab that notifies the user that the filter is in place with both a visual indication and audible

click.•Contoured belt made of closed-cell, chemically-resistant foam shaped to contour to the wearer’s back

for extra comfort.


GEL LOGIC 212 PRO Camera : Progressive Scan CCD, 1392x1032 pixels Illumination standard: fluorescence (UV trans-illumination) Illumination optional: white light conversion screen, white light

trans-illuminator (LED based), Epi-UV (254nm, 306, 370nm).

Filters: motorized 6 position wheel, with optical band pass 52 mm, 590 nm filter come in standard and optional 435 nm, 535 nm, and 570 nm, 670 nm filters.

IN VIVO FX PRO Camera : CCD 2048x2048 pixels with -29 C cooling and

computer controlled lens (10X zoom, 20-200mm, ƒ2.5. Illumination: fluorescence (epi-illumination, 410-760 nm with

14 excitation filters and powerful 400 W Xenon illumination source) and white light (epi-illumination and transillumination).

Emission filters: 535-830 nm include 6 emission filters. Optical resolution: 10 micron/pixel. Detection mode: multiwavelength fluorescence, luminescence,

radioisotopic, X-ray.

ALBIRA Stand alone, bi-modal or tri-modal configuration of PET, SPECT,

and CT. PET: with 8 LYSO single crystal with associated position sensitive

photomultiplier tube per ring (up to 3 rings). SPECT: single crystal detectors and associated electronics, 2

detectors per instrument. CT: high resolution Voxel size (35um)with 35um X-ray focal spot

size. Internal video camera allows users to monitor the status of

their mouse from the workstation. Compatible with most commercial gas anesthesia.


NucleoCounter® NC-100™for total counting of mammalian cells and viability

NucleoCounter® YC-100™for total counting of yeast cells and viability

Specifications:Loading volume: 50 μl is loaded into the NucleoCassetteMeasurement volume: 2 μl in the measurement chamber of the NucleoCassetteAnalysis time: 30 secondsMeasurement range: 5 x 103 to 2 x 106 cells/ml.Size: 38 x 26 x 22 cm (W x H x D), weight 3 kgSoftware: NucleoView computer software for documentation andpresentation - optionalPrinter: External printer for documentation - optional

Specifications:Loading volume: 50 μl is loaded into the NucleoCassetteMeasurement volume: 1 μl in the measurement chamber of the NucleoCassetteAnalysis time: 30 secondsMeasurement range: 5 x 103 to 6 x 106 cells/ml.Size: 38 x 26 x 22 cm (W x H x D), weight 3 kgSoftware: NucleoView computer software for documentation andpresentation- optionalPrinter: External printer for documentation - optional


Innovative Solutions for Accurate Tablet Testing

Distek has equipped the Symphony 7100 with an innovative set of capabilities aimed at enhancing both the user experience and instrument functionality. Some key Symphony 7100 features and capabilities include:

Third generation bathless technology Running up to three independent methods simultaneously Configurable from 1-8 positions Independent RPMs withcontinuous monitoring Raising and lowering shaftsindividually or collectively Intuitive color touch screenuser interface Embedded temperature sensors for continuous monitoring Semi-circle footprint for improved vessel access Rapid media heating from ambient to 37°C in less than 15

minutes Quick change height adjustment Electronic qualification guidance

SYMPONY 7100 - Distek Bathless Dissolution System

MODEL 2500 - Distek Waterbath based Dissolution System

The Distek Model 2500 Dissolution Test System offers unmatched flexibility and configurability while maintaining the user-friendliness that laboratories around the world have come to expect from the preceding four generations.

Intuitive Touch Screen Color Display Wake Up and Sleep Mode Interchangeable Paddles and Baskets Automatic Height Adjustment Hideaway Self-Priming Thermocirculator Optional Dosage Delivery System Electronic Qualification Guide Volume Flexibility

Friability Tester


EVOLUTION 4300 - Distek Automated Dissolution Sampler

Independent Dual Bath Programming allows users to run two independent methods simultaneously. Positive Displacement Syringe Pumps allow for highly accurate volume collections and significantly

reduces carry-over between sampling intervals. Standard features include media recycling, media replacement, dilution of collected samples, and pH or

volume adjustments in the dissolution vessel. Septum Piercing Capability for sampling into sealed test tubes or vials.

3100 SERIES– Distek Bathless Disintegration System

Bathless Design Rapid warm up Integrated Temperature Sensors Semi-Circular Beaker Layout Electronic Stop Clock

Media Preparation

Ezfill 4500 Dissolution Media Preparation Station

Physical Testing

Testing

http://www.distekinc.com/Products/ezfill_4500.htm

http://www.distekinc.com/Products/disintegration_310x.htm


ÄKTA purifier 10/100

A versatile, modular liquid chromatography systems for fast and reliable separations of proteins, peptides, and nucleic acids by FPLCTM.

Technical information and specifications:Flow rate range setting, ÄKTApurifier 10 : 0.001 to 10 ml/minPressure range, ÄKTApurifier 10 : 0 to 25 MPaFlow rate range setting, ÄKTApurifier 100 : 0.01 to 100 ml/minPressure range, ÄKTApurifier 100 : 0 to 10 MPaConductivity range : 1 μS/cm to 999.9 mS/cm(RPC – IEX – HIC gradients)pH range : 2 to 12Temperature range : 4°C to 40°CSolvent compatibility : all commonly used chromatographicsolventsSize (W × H × D) : 500 × 620 × 460 mmWeight : 75 kg

ÄKTA avant 25/150A preparative liquid chromatography system intended for method and process development Technical information and specificationsPower consumption 800 VA Enclosure protective class IP 21, wet side IP 22 Placement of pressure sensors System pump, Sample pump, Pre-column, and Post column Placement of air sensors Inlet A, Inlet B, and Sample inlet Pump type Piston pump, metering type Flow rate setting ÄKTAavant 25 0.001 to 25 ml/min (normal range) 0.001 to 50 ml/min(column packing flow) ÄKTA avant 150 0.01 to 150 ml/min (normal range) 0.01 to 300 ml/min (column packing flow) Pressure range ÄKTAavant 25 0 to 20 MPa (2900 psi) ÄKTA avant 150 0 to 5 MPa (725 psi)Viscosity range 0.35 to 10 cPWavelength range 190 to 700 nm in steps of 1 nm, up to 3 wavelengths simultaneously Flow cells 0.5 mm optical path length, 1μl cell volume

2 mm optical path length, 2μl cell volume (default) 10 mm optical path length, 8 μl cell volume

Conductivity monitor Reading range 0.01 mS/cm to 999.99 mS/cm Temperature monitor Reading range 0°C to 99°C pH monitor Reading range 0 to 14Integrated fraction collector Number of fractions up to 576 (6 × 96-well deep-well plates) Vessel types 3, 8, 15, or 50 ml tubes; 24-, 48-, or 96-well deep-well plates Vessel type selection Automatic recognition Fraction volumes ÄKTAavant 25 0.1 to 50 ml ÄKTA avant 150 1 to 50 ml Cooling specification 6°C to 20°C, temperature control


BIACORE X100An automated and versatile system for comprehensive, label-free analysis and characterization of biomolecular interactions in real-time Technical information and specifications Detection technology : Surface plasmon resonance (SPR) biosensor Data presentation: Result tables, result plots, and real-time monitoring of sensorgrams Working principle: 2–1 detection (automatic reference subtraction) Information provided: Kinetic and affinity data (KD, ka, kd) specificity, selectivity. Concentration measurements* Sample type: LMW drug candidates to high molecular weight proteins in various sample environments (also DNA, RNA,

polysaccharides, lipids, cells and viruses), e.g. in DMSO-containing buffers, plasma or serum Kinetics: Multi cycle or single cycle (without the need for regeneration between injections) Association rate constant(ka) 103 – 107 M-1s-1 (for typical protein-protein interactions) Dissociation rate constant(kd) 10-5 – 0.1 s-1 Dissociation constant (KD): 100 μM to 1 pM Detection limit :Typically 0.1 nM for > 10000 Da analytes Typically 1 nM for < 10 000 Da analytes Molecular weight detection: Down to 100 Da in various sample environments Analysis time per cycle: Typically 2–15 min Sample capacity per run: Maximum 15 samples Automation : 24 hours unattended operation Injection volume: 5–90 μl Required sample volume: Injection volume + 20–30 μl (application dependent) Immobilized interactant consumption: Typically 1 μg Concentration analysis: With standard calibration curve or Calibration-free concentration analysis (CFCA)* Baseline noise: Typically < 0.1 RU (RMS) Baseline drift: Typically < 0.3 RU/min Sample refractive index range: 1.33 – 1.40 In-line buffer degassing: Included* Number of flow cells : 2 Flow cell dimensions: H: 50 mm W: 0.5 mm L: 2.1 mm In-line reference subtraction: Automatic Flow rate range: 1–100 μl/min Analysis temperature range: 4–40° C* (maximum 10 degrees below ambient temperature) Sample compartment temperature: Ambient Dimensions (W × D × H) :Instrument:596 × 593 × 563 mm

WAVE BIOREACTOR SYSTEM 2/10A cell culture platform suitable for applications in gene and cell therapy and regenerative medicine Technical information and specificationsWorking volume (L) 0.2–5Integral features Speed/Angle control

Temperature controlAeration

Options CO2MiX O2MIX

DOOPT20 pH PERFUSION CTRL


Multiphor™ II Electrophoresis SystemOne system for 1-D or 2-D protein electrophoresis or DNA fragment analysis

Technical information and specifications Capacity IEF up to 12 IPG strips with Immobiline DryStrip KitDimensions 7, 11, 13, 18 or 24 cm Immobiline DryStripCapacity native, SDS-PAGE or 1 gel2-D SDS-PAGE Dimensions 0.5 × 24 × 18 cm (ExcelGel 12–14)

0.5 × 24 × 11 cm (ExcelGel 2-D, 12.5),Programmable parameters see EPS 3501 XL Power UnitOperating conditions 4–40 °CHumidity 20–95%Maximum power 100 WMaximum voltage 3500 Vp-p (+ 1750 V with reference to ground)Cooling plate Aluminium oxide, 21 × 27 cm (l × w)Maximum pressure on cooling plate 0.5 barChemical resistance Avoid concentrated acids and bases, halogenated and aromatic hydrocarbons.Dimensions 16 × 31 × 40 cm (h × w × d)Weight 7 kg

Ettan™ IPGphor™ 3 IEF SystemA fully integrated isoelectric focusing system optimized to deliver speed and reliability in the first dimension of 2-D electrophoresis Technical information and specifications

Operating temperature 15°C to 35°C

Relative humidity 0% to 70%

Electricity 115/230 V, 50/60 Hz, 100 W,0-10 000 V, 10 V, 0-1.5 mA,

Auto-iTC200 Isothermal Titration CalorimetryThe most sensitive and reliable microcalorimeters availableTechnical information and specificationsOperating temperature range 2ºC to 80ºCResponse time 10 s (1/2 response time)Cell design 200 μl, coin-shaped, fixed-in-

place,nonremovable, Nonreactive Injection syringe 40 μl, automated, capable of delivering injections

as small as 0.1 μlCell-to-cell heat compensation Power feedbackSample througput(MicroCal Auto-iTC200) Up to 75 samples/dayDimensions (W × H × D) 63.5 × 76.2 × 57 cm


Ettan™DALTsix Large Vertical SystemA large format and medium throughput 2-D electrophoresis Technical information and specificationsGel capacity 6 gelsBuffer volume 4.5 l (anode) 0.8 l (cathode) Circulation pump voltage 115 V/60 Hz or 220 V/50 Hz Buffer circulation pump rate 10 l/min Cooling ceramic heat exchangerPressure limit ceramic heat exchanger 8 kPa (12 psi)Maximum temperature 40°C Environmental operating conditions indoor use, 4-40°C; humidity up to 90%;installation category II Pollution degree 2 Safety features safety interlock lid, submersive pump Product and safety certifications EN61010-1, UL3101-1, CSA22.2 1010.1, EMC EN61326, CE markedDimensions (H × W × D) 40 × 54 × 16 cm Weight 12.2 kg

IN Cell Analyzer 2000An automated cellular and subcellular imaging system for fast, automated multiwavelength imaging and analysis in fixed and live cells. Technical information and specifications Pixel Size 6.45 μm x 6.45 μmField of view at 10x 0.603 mm2Focus Hardware Laser sensor

Software Contrast based algorithm Z Stage Resolution 25nm

Light Source System lamp 200W Metal Arc Min lamp lifetime 2000 hours

Transmitted light LEDPolychroic Control Automated 2 positionsObjective Control Automated 4 positionsFilter selection Excitation Filters 8

Emission Filters 8Automation Robotics ready and compatible with all major

commercially available laboratory robotic systemsDimensions Instrument: 1140 x 605 x 654mm (W x H x D)Weight ~50kgElectrical 230 and 110 VTemperature Control Minimum Setting Ambient

Maximum Setting 42°C


Amersham ECL Gel and Gel Box Simple Plug & Play electrophoresis providing optimal conditions for protein detection Less buffer requirement unlike other brands, horizontal system prevents leakage of buffer Easy to set up and easy to load function. Wide variety of Gel selection to complement Gel Box System and low cost of gel with increased gel self life up to 1 year Low cost of maintenance Saves time and effort Excellent results reproducibility, high sensitivity and resolution

NanoVue™ Plus SpectrophotometerA stand-alone instrument with a novel drop-and-measure sample plate that can be used with a wide range of chemicals

Technical information and specificationsWavelength range 200 to 1100 nmWavelength calibration Automatic upon switch onPathlength selection Automatic with the option for manual selectionStored methods 90Spectral bandwidth 5 nmWavelength accuracy ± 2 nmWavelength reproducibility ± 0.5 nmAbsorbance accuracy Maximum ± 1% (at 259 nm) at 0.7 to 0.8 A

using uracilLight source Long-life stabilized XenonDetector Twin CCD Array

Genomics and Proteomics consumablesDNA & RNA PreparationNucleic acid and Protein blottingPCR PCR & DNA Cleanup 2D ElectrophoresisPCR & RT PCRSequencing / genotypingSpectrophotometry

Chromatograhy Columns and Media


CELL DISSOCIATOR & HOMOGENIZER - gentleMACS

Specifications :

Size (L x W x H) : 347 mm x 215 mm x 195 mm Main Power : Power consumption :Max. 320 VA Rotational speed motor: 200- 4.000 rpm Rotation : Clockwise or counter clockwise Rotational acceleration : 100 r/s2 Torque : Minimum 150 mNm. Overload restriction over the range of 200- 4.000 rpm gentleMACS Program Card : 64 KBit

AUTOMATIC CELL SEPARATORautoMACS™ Pro Starting Kit

Specifications :

Programs: 12 pre-set Protocols: single- and double column enrichment, positive selection and depletion Column capacity: 2×108 magnetically labeled cells/sample,

4×109 cells/sample, up to 15 mL of whole blood

Processing volumes : 0.2–50 mL (input) 0.5–52 mL (output) Power consumption : 200 VA

AUTOMATIC CELL ANALYZER (FLOW CYTOMETRY)MACSQuant™ Analyzer

Specifications :

The MACSQuant® Analyzer is a compact benchtop flow cytometer That is small in size but big in performance. The instrument can fit into confined laboratory spaces, including laminar flow cabinets. In spite of this extraordinary compact design (60 x 35 x 40 cm), the MACSQuant Analyzer offers many outstanding features, including: Stable optics: three robust lasers (violet, blue, red) are secured unto the optical bench Absolute cell counting: exact volumetric pipetting using the robotic arm Multiparameter flow analysis: seven fluorescence and two scatter channels Flexible: wide choice of fluorochromes may be used for multicolor cell characterization


GALAXY DIRECT HEAT CO2 INCUBATOR

Features : Direct heat ; 170 liter (6.0 cuft) capacity on a minimal footprint ; IR CO2 sensor with automatic auto-zero programmable function ; Seamles chamber ; 25 mm acess port ; Perforated shelving ; Sealed inner glass door for atmosphere conservation ; RS-232 communication port ; Large volume humidification pan ; Quick and comprehensive chamber cleaning ; HEPA filtration of gas supply inlets ; 8 position shelving rack Specification : Chamber : 170 liters / 6.0 cu ftTemperature range : 4oC above ambient to 50oC CO2 Gas range : 0.2-20 %Humidity : Reservoir (Removable stainless pan vol 2.5 liter)Shelves : Provided 4, Dimensions per shelf 51.9 x 42.6 cm External Dimensions (W x D X H) : 685 x 677 x 848 mmElectrical : 120 V & 220-240 V , 50/60 Hz. Power 500 WattWeight : Net 90 kgCertification : CE Certified

FERMENTOR & BIOREACTORModel : BioFlo 115 Grow virtually any cell type : aerobic and anaerobic microbes, yeast, insect, plant & mammalian cells Water-jacketed and heat-blanketed autoclavable glass vessels, offered in 4 sizes : 1.3; 3.0; 7.5; 14.0 L Operating modes : Fermentation and cell culture Control and view up to three independent fermentors/bioreactors from a single touchscreen. The same control software is featured on all New Brunswick benchtop fermentors and bioreactors Four-gas mix option in cell culture mode, Two-gas mixing option in fermentation mode Highly-customizable gas flow options allow you to design a system specific to your needs PH and DO controller with PH and DO probes, Levels foam control with conduction probes Primary control unit/ PCU with manual/automatic controlPower controller maximum heating

temperature 70oC, Temp. Controlled by PID with Pt 100 sensor


Innova Open Air Shaker

Specification: Shaking : Range : 25 to 500 rpm with 1" (2.54 cm) orbit Control ; ± 1 rpm Drive Mechanism : Triple-eccentric counter-balanced drive in cast iron housing with 9 permanently

lubricated ball bearings. Driven by solid-state brushless DC motor Digital LED electronic display in 1 rpm increments. Character height: 9/16" (1.4 cm) Timer : Programmable shaking periods from 0.1 hr. to 99.9 hrs. Triggers audible alarm and energizes

status light at end of period or setting as continuous operation Alarms : Audible and visible, Indicate when speed deviates more than 5 rpm from set point and when

timer operation has expired. Audible alarm may be muted Set point Retention : All set points and operating status are retained by non-volatile memory. Automatic

restart after power is restored (indicated by flashing display) LED Display : Indicates speed in increments of 1 rpm, running time in 0.1 hrs., and alarm conditions.

Character height: 9/16" (1.4 cm) Power : 240V 50/60Hz, 150 W Ambient Conditions : Temperature: 0 - 60°C. Humidity: 90% non-condensing Platform size (cm) : 76.2 x 45.7, Overall dimension WDH (cm) : 76.2 x 45.7 x 16, Weight : 66 Kg Shaker capacity : 96 erlenmeyer with flask size 125 ml (Dedicated platform) Include : Dedicated platform with 40 clamps for Erlenmeyer flask size 250 ml

OPEN AIR SHAKERModel : Innova 2350

INCUBATOR SHAKERModel : Innova 40

Specification : Type : Incubated Shakers - BenchtopPlatform Size : 18" x 18" (45.7 x 45.7 cm)Capacity : (18) 250 mL or (2) 6 L flasks on Univ.

Platform. Temperature Range (ºC): Ambient +5 to 80Special Features : Refrigeration, Multi-Step ProgrammingDrive : Triple-Eccentric DriveDescription : Benchtop incubator shaker features an easy-to-use, multi-step programmable controller for automating changes to temperature, speed or running time. For

test tubes and flasks to 6 L. Shaker platform, flask clamps and

accessories sold separately.


PRIMUS - sterilizer

Small – Medium – Large Capacity AutoclaveSingle/ Double Door Electric/ House steam Small : 110, 250, 430, 540, 740 LMedium : 590, 740, 930, 1490, 2080 LLarge : 1290, 1570, 1960, 2040, 2810, 3940, 5940, 7390 LAlso available : Custom size

Products: Healthcare Sterilizers BioPharma Sterilizers Laboratory Research Sterilizers Vivarium Sterilizers Biocontainment Sterilizers Pri-Green Conservation Systems Steam Generators

Feature:Pri-Mirror reflective finish on solid 316L stainless steel: non-porous surface that is easy to clean and hostile to microorganisms.Non oxidizing surface: no discoloration and mantain its clean, smooth, reflective qualities over years of service.Faster than comparably-sized cylindrical sterilizers.Primus rectangular chamber: maintain usable volume.Space saving design fits existing facilities or new construction.Microprocessor control: simple to operate, reliable, and versatile.

Cryolab Series Biosystem Series


LIQUID NITROGEN TANKModel : Cryolab Series – Technical Specifications

Model Cryolab2

Cryolab5

Cryolab10

Cryolab20

Cryolab25

Cryolab35

Cryolab50

Capacity, litres 2 5 10 20 25 35 50

Evaporation litres/day 0.08 0.18 0.20 0.18 0.25 0.27 0.28

Static hold time, days 25 28 50 111 100 130 179

Empty weight Kg 2.8 4.1 5.6 9.1 7.4 12.2 15.5Full weight Kg 4.4 8.1 13.7 25.3 27.6 40.5 55.9

Neck diameter mm 32 51 61 51 51 63 63

Overall height mm 385 495 560 570 585 650 810

Overall diameter mm 185 216 305 407 395 407 407

Part No 9901015 5901030 9901040 9901050 9901062 9901080 9901090

LIQUID NITROGEN STORAGE SYSTEMModel : Biosystem 12

Specification: Liquid nitrogen capacity vapour phase : 32 Liquid nitrogen capacity liquid phase (litres) : 250 Static evaporation rate litres/Day * Static holding time

(days)* : 50 Max vial 2ml capacity liquid phase : 12,300 0.5ml Straw capacity : 75,920; 0.25ml Straw capacity : 170,560 Hot gas by pass option; Vapour guard overfill protection Dimensions HWD (mm) : 1065 x 741 x 868; Internal Height : 745 mm

* : Actual holding time will vary with type of use

Includes:Plastic Cryo-boxesEar Protectors (BS6344), Cat. # 8701007Safety face shield (CE), Cat. # 8701032Cryo-Glove Mid Arm, Waterproof (Medium) 355mm, Cat. # 9701115 Optional:Cryostar 30Low Pressure Liquid Nitrogen Cylinders; Capacity : 30 LComplete with Castors, all Control Valves, Safety Devices and Contents Indicator.

CRYOGENIC INSTRUMENT


TOTAL SOLUTION FOR ANIMAL FACILITIES

IVC starter pack Containment housing for mice or rats

Compact footprint

Flexible configuration of racks

Affordable pricing

Safe for animals/operators/environment

Conventional Cage (Open cage and Filter Top cage for mice and rats)

Size comply with EU, USA, and UK guidelines. Cage design facilitates animal welfare, meeting

research requirements while minimizing experimental variables.

Certified AISI 304 Stainless Steel wire lid. Bottle with silicon comply with Title 21 FDA

requirements while the bottle caps are totally made of polished AISI 316, corrosion resistant, Stainless Steel.

Filter tops feature Polyester Filter Sheet with atmospheric dust efficiency of 92% on 8-10 µm particles, creating a protective barrier at cage level.

Housing for Large Animal (rabbits, ferrets, and guinea pigs)

Components of cages are easily

removable, washable, stackable, and

autoclavable for good practicality and

safety.

All cages comply with US, UK, and EU

guidelines.


NANODROP Microvolume UV-Vis Spectrophotometer

NANODROP 8000 a muti-sample micro-volume UV-Vis spectrophotometer.With the NanoDrop 8000, you can measure more samples in less time with the same reliability and patented sample retention technology of the NanoDrop 2000. Using an 8-channel pipetter to dispense samples onto an array of pedestals, analyze 96 samples in less than six minutes.

Package includes: 1. Multichannel (8

channels) micropipette, 2. Software (free future

upgrade/update via web),

3. Calibration fluid (CF-1), 4. Reconditioning kit (PR-1), 5. Laptop

NANODROP 2000 UV-Vis spectrophotometers used to quantify and assess purity of DNA, RNA, Protein and more. Measure

samples volume as small as 0.5µL

Package NanoDrop 2000 Includes: 1. Eppendorf Micropipette Research Variable, 2. Software (free upgrade via web), 3. Calibration fluid (CF-1), 4. Reconditioning kit (PR-1),

5. Laptop (Core 2 Duo, min RAM 2 GB)

Specification: Min. Sample Size 1µLNo. of Samples Up to 8Pathlength 1 and 0.2mmLight Source Xenon flashDetector Type 2048-element linear silicon CCDWavelength Range 220 to 750nmWavelength Accuracy 1nmWavelength Resolution 3nm (FWHM at Hg 546nm)Absorbance Precision 0.003 A (1mm path)Absorbance Accuracy 3% (at .74 A at 350nm)Absorbance Range 0.05-74 (10mm equivalent abs)Detection Limit 2.5ng/µL (dsDNA)Max. Concentration 3700ng/µL (dsDNA)Measurement Cycle Time <20 sec. (for 8 samples)L x W 24 x 32cmOperating Voltage 12V DC

Power Consumption 30w (6w standby power)

Weight 7.5 lb. (3.4kg)


NANODROP 3300 FLUOROSPECTROMETER

Thermo Scientific* NanoDrop 3300 is a versatile and cost-effective instrument designed for broad spectrum fluorescence analysis. Using a patented technology, the NanoDrop 3300 Fluorospectrometer uses as little as 1 µL of sample volume.

Small footprint, fast measurement, and easy to use Sample size as small as 1µL UV, Blue and White LED excitation, covering a broad wavelength

range No filter changes No expensive monochromator Ability to run diverse applications Customize applications specific to your research Measures multiple fluorophores from a single sample Tools to eliminate the guesswork Provides both spectral and quantitative data No external power supply is required; all operating power is

supplied by the USB port on the PC.

Includes: 1. Eppendorf Micropipette Research Variable, 2. Software (free upgrade via web) 3. Laptop (Core 2 Duo, min RAM 2 GB)

Specifications:

Instrument Type Fluorospectrometer

Min. Sample Size 1µL

No. of Samples 1

Light Source 3 light emitting diodes (LEDs)

Excitation UV: 365nm; Blue: 470nm; White: 460 to 650nm

Detector Type 2048-element linear silicon CCD array

Wavelength Range 400 to 750nm

Wavelength Accuracy 1nm

Spectral Resolution 8nm (FWHM at Hg 546nm)

Fluorescence >4 orders of magnitude fluorescein

Detection Range <1fmol fluorescein

Measuring Time 2 to 10 seconds

Volts5V DC (all power supplied by USB port; no external power supply)

Power Consumption 2w (1w standby power)

Net Weight 3.3 lb. (1.5kg)


NANODROP LITEThe NanoDrop Lite uses the same sample retention system that has become a hallmark of NanoDrop instruments. While it is designed with fewer features than the NanoDrop 2000 and NanoDrop 8000 series, the NanoDrop Lite delivers where it counts: rapid, accurate and reproducible microvolume measurements without the need for dilutions.

Measures nucleic acid concentration at 260 nm and purity using the 260/280 ratio

Measures purified protein concentration at 280 nm Employs the unique NanoDrop microvolume sampling

technoloy Delivers the accuracy and reproducibility expected from

NanoDrop instruments Uses built-in controls and software - no computers

required Offers an optional printer for cryogenic labels

Specification :

Instrument Type Spectrophotometer

Minimum Sample Size 1 µl

Sample Number 1

Path Length 0.5 mm

Light Source(s) Light emitting diodes

Detector Type Silicon photodiode

Wavelength Range 260 and 280 nm

Spectral Resolution ≤ 8.0 nm

Absorbance Accuracy 3% (at 1.05 Abs at 260 nm)

Absorbance Range (10 mm equivalent) 0 - 30 Abs

Lower Limit of Detection 4 ng/µl (dsDNA)0.12 mg/ml (BSA)

Maximum Concentration 1,500 ng/µl (dsDNA)45 mg/ml (BSA)

Measurement Time < 5 seconds

Footprint 16 x 11.5 cm

Weight 0.8 kg

Sample Pedestal Material of Construction 303 stainless steel and quartz fiber

Operating Voltage 6 V (DC)

Operating Power Consumption 18 W

Standby Power Consumption ≤ 2.5 W

Software Compatibility Local control only


FORMA 88000 SERIES– ULTRA LOW FREEZER

Thermo Scientific Forma 88000 Series -86°C ultra-low temperature freezers feature a range of functionality including:

More Samples, Less Freezer Footprint: Choice of five capacities maximize sample storage while minimizing the freezer's physical space inside the lab

Choice of Refrigeration: For the strictest tolerances, the high-performance mode provides the tightest temperature uniformity and peak variation†—for most applications, energy-savings mode offers excellent temperature control, plus up to 15% savings on energy usage compared to high performance mode

New Cabinet + Vacuum Insulation Panel Technology: increases the internal capacity of 2 inch vials over previous generation freezers—gain up to 76% more capacity in the same footprint with 1mL CryoBank tubes†

Sample Storage Capacity: Five sizes accommodates any size lab, featuring the industry’s leading capacity per footprint specifications††

Innovative, touch-screen user interface: Monitor the freezer’s health 24/7 and access a detailed event log—simply touch the heart icon on the main screen to see freezer's temperature, and access settings and operating parameters

Built-in USB port: Obtain a record, simply download a report of the current event log to a portable drive Environmentally-friendly, CFC/HCFC free refrigerants NEW refrigeration system: with high-efficiency compressors for outstanding performance and reliability Brazed plate heat exchanger for more efficient heat transfer—induction brazed joints to reduce leak

potential and improve reliability Power management system: protects against a wide range of voltage variation and is easily accessible

through the touch-screen display Remote alarm contacts: with 4-20 milliamp output compatible with external alarm and monitoring

systems Two rear access, 1-inch (25mm) ports: allow for the use of inexpedient probes or instrumentation On-board data storage: Store up to 15 years worth of temperature and event data on our on-board

computer Easily exchange data: Use the new USB port to download freezer temperature and event log data, or

freezer settings from one freezer to another Easy-to-remove, washable filter: Provides protection against dust on the condenser, which can cause

reduced refrigeration performance and increased risk to samples NEW reinforced shelves: Store up to 278 lbs. of samples (depending on freezer model) on the reinforced,

stainless steel shelving .


Type A2 Biological Safety 1300 Series A2 Class II Cabinet

SpecificationsType : Class II, Type A2Certification : NSF/ANSI 49, UL, CEFilter : H14 HEPA EN 1822, 99.995% MPPSMax. Opening : Height21 in. (53.5cm)Load Bearing Capacity : 110 lb. (50kg)Service Fixtures : 6 (3 on each side)

Available in two models 4 feet and 6 feet. Safety Features Meet NSF/ANSI* Standard 49 Real-time airflow adjustments ensure inflow and downflow velocities

remain steady . Pressure sensor filter monitoring measures total airflow across the Proprietary front window design simplifies cleaning for a safer

working environmen working area . SmartFlow* Indicator adjusts airflows as filter resistance changes . SmartFlow visually demonstrates cabinet's ability to compensate to

maintain personal protection .

Type B2 Biological Safety Cabinets 1300 Series Class II

SpecificationsType : B2Filter Efficiency : 99.99% at 0.3µm Filter Type : HEPA Sash Opening : 8 in.; 21.75 in. max. (20.3cm; 55.2cm max.)Outlets : 2 duplexAccess Port(s) : 2 on each sideWarranty : 3 years, parts and labor The Thermo Scientific 1300 Series B2 is designed for safe and easy work with gases and toxic chemicals. It is the NSF-recommended biological safety cabinet that uses volatile chemicals as an adjunct to microbiological applications.

Accesories :Optional stands, UV-lighting, arm rests, foot rests, valves and piping provide optimal configuration flexibility for the Thermo Scientific* 1300 Series A2 Class II Biological Safety Cabinets.

Food & Agriculture

Elementar Analysensysteme

The cube family of elemental analyzers –how to decide ?

Application fields :• CHNOS elemental analysis for organicchemistry and pharmaceutical analysis, moving into the control ofindustrial products, geology, agriculture, environment protection,biotechnology, carbon and mineral oil analysis as well as authenticity andorigin analysis.

• Agricultural analysis for thedetermination of N/protein from macro samples into the gram range,which currently replaces more and more the wet chemical Kjeldahlmethod.

• Water analysis With 30 years of experience in TOC analysis based on high temperaturecombustion, the TOC analyzers of ELEMENTAR cover all kind of aqueoussamples from pharmaceutical water up to waste water and sludges

• Solid fuel analyzers The analysis of CHN and S is a standard technique for caloricdetermination and environment compatibility of fossil fuels such as coal,coke and peat as well as for regenerating raw materials such as biomassor combustible garbage.

• Special elemental analyzers Determination of isotopic ratios, trace levels of sulfur and nitrogen in fuelsor the analysis of halogen or phosphorus containing compounds add newchallenges for the elemental analyzer.

Colony Star 8500

Food & Agriculture

Specification:

Counter : LCD-display (0…99999/5 digits) with reset Switch and acoustic signal (which can be switched off)Plug for automatic electric pen.Connection : 230V/50Hz…60Hz/39VSize : LXWXH : 250X230X95 mmWeight : 1.5 kgIncludes : - magnifier with shelter (magnification : 2x) - automatic electric pen - fiber refill - clear glass plate with dark field

COLONY COUNTER – Colony Star (# 8500)

LACTOSTAR (# 3510)

Specification:

* Connected loads : 230 V/180 VA 50– 60 Hz 12 V DC connection* Sample throughput : up to 40 samples per hr* PC connection : serial interface, 9,600 Baud The software is included in the scope of delivery* Printer : parallel interface* Dimensions : 44 x 44 x 20 cm (W x L x D) * Weight : 15.5 kg

NOVA SAFETY (# 3670)

Specification: * Reliable and tested bench centrifuge with angular rotor for fat determination* Automatic lid interlock* Automatic brake (braking time < 8 sec)* Digital centrifugation timer* Heating, thermostatically set at 65˚C* Filling capacity : max. 8 butyrometers

Food & Agriculture

HVP- 50

HVA-85/110 HICLAVEEconomy type but with COOLING FAN

Improved Processing Ability Forced Cooling Fan as Standard Function User-Friendly Features

Model HVA-85 HVA-110Effective Capacity 85 Liters 110 LitersChamber Size 420 Ǿ x 615H mm 420 Ǿ x 795H mmDimensions 667W x 652D x 1011H mm 667W x 652D x 1011H mmSterilization temp. 105°C to 135° 105°C to 135°CNet weight (approx) 78 kg 85 kg

New Vertical Autoclave with Vacuum Pump and Drying Cycle

Specification: One-touch Lid Interlock System Vacuum Pump built-in Effective capacity : 50liter Chamber size(㎜) : 300φ×710D Outer dimensions(W×H×D㎜) :　 510×1040×530 Max.Steril.temp : 135℃ Process mode : 4-modes Net weight : 80kg

HPM -16Handy Portable Autoclave with Drying function

Specification:Effective capacity : 6literChamber size（㎜) : 160φ×310DOuter dimensions : 324×292×521 (W×H×D㎜) Selective Steril.temp : 121℃ and 132℃Net weight : 12㎏

Food & Agriculture

NEW VERTICAL AUTOCLAVEHG 113/133; HGS 113/133; HGD 113/133

Just press one button and the lid will automatically open / close.

New Body Design with larger diameter chamber (500 mm).

The HGS/HGD series with separate steam generator, and vacuum pump & dry (HGD).

USB connectors (option).

Specification:

NEW Horizontal Autoclave with Automatic Drying Function—HRG-112/140

Vertical Sliding Door Effective Chamber Capacity of 112 L/ 140 L Sliding tray convenient for easy loading of the object Drying function also available Working temperature range: 105 - 135 oC Sterilization timer : 1 - 60 min. Remaining time display Drying time: 1 - 99 min. Remaining time display Selectable cycle: 4 Cycles (cloth, solid, liquid, additional dry), 3 memories

pattern Compound gauge: -0.1 - 0.4 Mpa Drying method: by vacuum pump and heater

Model HG-113 HG-133 HGS-113 HGS-133 HGD-113 HGD-133Effective capacity 108L 129L 113L 133L 113L 133L

Chamber size（㎜) dia.500x552H dia.500x656H dia.500x576H dia.500x680H dia.500x576H dia.500x680H

Dimensions (W×D×H㎜) 686x930x870 686x1034x870 686x930x870 686x1034x870 686x930x870 686x1034x870

Operating temp. range 105 - 135 oCSterilization timer 1 - 300 min. Remaining time display methode

Cycle selection Liquid Agar, Solid, and Dissolution cycleFabric, Solid, Liquid, and Agar cycle

Fan cooling ON/OFF --------Water cooling -------- ON/OFFWater supply Manual AutomaticPressure 0 - 0.4 Mpa -0.1 - 0.4 MpaNet weight 137kg 145kg 153kg 161kg 184kg 192kg

Food & Agriculture

CALORIMETER SYSTEM

C200Compact low cost combustion calorimeter to determine calorifi c values of liquid and solid samples. Suitable for educational purposes (e.g. technical schools, universities) and for commercial, industrial laboratories with a low number of samples.

Recommended for educational purposes as well as for laboratories with a low number of samples Space saving, low cost combustion calorimeter to determine calorifi c values of liquid and solid samples Calorifi c value measurement in accordance with DIN 51900, ISO 1928, ASTM D240, ASTM D4809, ASTM

D5865, ASTM D1989, ASTM D5468, ASTM E711, GOST 147, GOST 21261... Four different test procedures isoperibol, dynamic, manual and time-controlled allow ideal adaptation to

various tasks Includes external power pack, complies with all global voltages from 100 - 240 V AC, 50/60 Hz; calorimeter is

powered with a low operating voltage 24 V DC Clear, self-explanatory menu structure and easy to operate display Manual water and oxygen handling Highly operator maintenance friendly Manual operating mode (educational mode): ignition and end of measurement are activated by user; changes

are displayed in one minute intervals; all calculations need to be performed manually Isoperibol, dynamic and time-controlled modes: automatic ignition and calculation of calorifi c value; result is

displayed Suitable for use with Calwin C 5040 calorimeter software: monitoring and visualisation of measuring

procedure (data xport and further processing is possible in Excel and / or Word etc.)

C2000Features: Automatic water handling system includes tempering, filling and emptying of

calorimeter inner vessel Automatic oxygen filling of decomposition vessel Automatic decomposition vessel identification Automatic sample ignition Validation according to DIN 51900, ASTM 240 D, ISO 1928, BSI etc. GOST-certified Operating methods: isoperibol, measurement time: approx. 22 min dynamic, measurement time: approx. 7 min Compact, integrated modular design for convenient operation Cooling water supply via thermostat, e.g. KV 600 or firmly installed water supply (C

25 pressure regulating valve recommended Interface connections for each of the following: scale, printer, monitor and sample

rack C 5020 User-friendly software C 5040 CalWin for controlling the calorimeter and

administrating measured data LIMS integration is possible Special halogen resistant vessel for quantitative decomposition of halogens and

sulfur The decomposition vessel can be changed to use disposable crucible C 14 Up to 8 calorimeters can be controlled by a single PC, using a multi-serial plug-in

card

Food & Agriculture

COLORMETER ColorFlex EZ

ColorFlex is a benchtop spectrophotometric color measurement system in 45/0 geometry with 1inch (25mm) viewed area, (#CFEZ-45)

Specification : Port Size : 31.8mm ; Viewed Area : 25.4mmSpectral Range : 400 nm to 700 nm ; Reproducibility : 0.05Spectral Resolution : 10 nm ; Spectral Bandwidth : <12mmPhotometric : 0-150%Light Source : Xenon Flash ; Lamp life : > 500.000 FlashesWeight 4.5 kg

Including : Glass Sample Cup (#04-7209-00), 2.5 inch (64mm), 3pcs Sample Cup Opaque Cover (#04-4000-00), 1 pc

Port Insert for Sample Cup, 2.5 inch (64mm) (# 04-6622-00), 1pc

PORTABLE COLORMETER MiniScan EZ 45/0 Specification : Measurement Principle: Dual-beam spectrophotometerPort Size : 31.8mm ; Viewed Area : 25.0Reproducibility : 0.05 ; Spectral Range : 400 nm to 700 nmSpectral Resolution : 10 nm ; Spectral Bandwidth : <12mmWavelength accuracy : 1nm ; Photometric : 0-150%Light Source : Xenon Flash ; Lamp life : > 500.000 FlashesWeight 1.0 kg

Including : Nose Cone +glass sample cup

TRISTIMULUS COLORIMETER D25LT

System consists of a D25LT sensor, sensor stand, Windows based color processing software, Microprocessor, 10-inch touch screen user interface, and internal serial printer. System includes sample presenter with auto centering guide. Standard accessories include: Instrument standards, spare lamp, and Instruction Manual

COLOR SPECTROPHOTOMETERLabScan XE

Measurement Principle: Dual-beam spectrophotometer

Geometry: 0º illumination, 45º circumferential viewing with 15-station fiber optic ring

Food & Agriculture

BagMixer 400 P 400 ml lab blender Useful volume: 50 - 400 ml Fixed blending speed: 8 strokes per second

Adjustable blending time ( 30 - 210 secs. or open running) Adjustable blending

Q-Tight® closing 270° retractable door

All stainless steel Power: 220/110V - 50/60 Hz

Size: 42 x 26 x 26,5 cm Weight: 16.5 kg

Scan 100, a high-tech manual colony counterReads 55, 65, 90, 150 mm Petri dishes PetriFilm™, Sanita-kun™, Compact Dry™Hardware Counting: 0-1999 CFU Multifunction digital screen Indicative sound: 4 levels Counting zone: Touch surface with adjustable sensitivity Export: USB port for easy transfer to any kind of software Storage: Built-in accessories storage rack Body: Stainless steel Power: 100/240 V Weight: 5.2 kg Dim (L x l x h): 35 x 25 x 17 cm

Gravimat automatically dilutes sample with the appropriate mass of solvent. Dilution time <20secs. for 250 ml ,10 secs. For 250ml with Booster kit Diluter factor 1/2 to 1/999 Max weight: 2500 gram Weighing and dispensing functions in one unit. Stainless steel—easy to clean RS 232 output for printer or LIMS Parameters: date, time, user code, pump selection, sample ID, sample weight, total weight, dilution factors. Dimensi: 25x42x30cm, weight: 10kg Gravimat is delivered with Bag Open, 5 liters autoclavable bottle (1 per pump) and autoclavable dispersing assemblies (2 per pump)

Delivered with: white diffusing background, 90 mm dish adapter, power supply, USB cable

Anabac® Autoclave deodorant Fresh smell in the lab100% biodegradable and compatible with any autoclave5 fragrances are available: Anabac® Classic, mint and eucalyptus fragrance Anabac® Poma, apple fragrance Anabac® Citrus, lemon fragrance Anabac® Floral, flower fragrance Anabac® Peach, peach fragrance

Food & Agriculture

COLORIMETER - LOVIBOND TINTOMETER

“PFXi series Integrated with RCMSi Technology for Remote Calibration & Maintenance Service via internet “

Parameter

PFXi995

PFXi880/AT

Model F

Measuring Principle

16 interference filter 16 interference filter Visual, in term of Lovibond units

Spectral response 420-710 nm 420-710 nm -

Light source 5 volt, 10 Watt tungsten halogen lamp

5 volt, 10 Watt tungsten halogen lamp

2 x 12 Volt, 10 watt tungsten halogen

Illuminant CIE Illuminant C CIE Illuminant C Approximates to daylight

Color scale

Lovibond RYBNAOCS TintometerGardner ColorPt-Co/Hazen/APHA Chlorophyll A & BFAC ColorBeta CaroteneIodine ColorKlett ColorCIE Values

AOCS TintometerCIE ValuesSpectral Data

Lovibond RYBN:0.1-70 Red and Yellow, 0.1-40 Blue, 0.1-3.0 Neutral.

Path length 0.004”-6” (0.1-153 mm) 0.004”-6” (0.1-153 mm) 0.004”-6” (0.1-153 mm)

Heater unit Factory fitted, 95’C (Optional)

Factory fitted, 95’C (Optional)

-

Dimension 515w x 195d x 170h mm 515w x 195d x 170h mm 330w x 410d x 230h mm

Supplied with unit

Optical glass cell of the relevant path lengths for each of the color scales included, a calibrated glass conformance filter, a spare lamp and instruction.

Optical glass cell of the relevant path lengths for each of the color scales included, a calibrated glass conformance filter, a spare lamp and instruction.

Complete set of 11 racks containing color glass standards Lovibond RYBN, a sample chamber, a pair of spare bulbs, glass cell 1” & 4 1/5”, manual book.

Material Research

Potentiostat/galvanostat

Versastat 3Compliance voltage : 12 VRise time (no load) : < 350 nsSlew rate (no load) : >8 V/µsMax current : 650 mACurrent measurement : 200nA - 650mAMin resolution : 6 pAImpedance measurement / EIS (optional)

Frequency : 10 µHz to 1 MHzMin AC voltage amplitude : 0.1 mV RMS

Interface :Digital inputs / outputs : 5 TTL logic outputs, 2 TTL logic inputsCommunication interface :USB

Package Including :Versastudio softwareTraining from PAR certified ITS engineerPC and printerCorrosion cell kitUpgrade :Frequency Response Analyzer for EIS capability (factory fitted)Upgrade max current to 2A, 8A, 10A and 20A

Versastat 4Compliance voltage : 12 VRise time (no load) : < 350 nsSlew rate (no load) : >8 V/µsMax current : 1 ACurrent measurement : 1A-4nAMin resolution : 120 fAImpedance measurement / EIS (optional)

Frequency : 10 µHz to 1 MHzMin AC voltage amplitude : 0.1 mV RMS

Interface :Digital inputs / outputs : 5 TTL logic outputs, 2 TTL logic inputsCommunication interface :USB

Package Including :Versastudio softwareTraining from PAR certified ITS engineerPC and printerCorrosion cell kit Upgrade :Frequency Response Analyzer for EIS capability (factory fitted)Max current to 2A, 8A, 10A and 20A

VERSASTUDIO SOFTWARE (select 1 only)Version 100 : basic DC voltammetry techniqueVersion 200 : advanced DC voltammetry techniqueVersion 300 : DC corrosion techniqueVersion 400 : complete DC voltammetry and corrosion techniques

http://www.princetonappliedresearch.com/index.aspx

AS200 Control AS200 Digit AS200 Basic

Sieve Shaker Specification : Application for separation, fractioning, particle size

determination For powder, bulk, material, suspension Sieving with 3D effect For sieve up to 203 mm / 8” Measuring range: 20 µm—25 mm Available in 3 models of AS 200 series

Test Sieve 8” diameter x 2” height stainless steel ASTM E 11 with compliance Certificate acc.

Collector Bottom 8” diam. Cat.#: 69.720.3050 Sieve cover 8” diam. Cat.#: 69.521.3050

AS 200 Control

Material Research

Catalog No. Size Catalog No. Size Catalog No. Size

60.150.000020 635 mesh 60.150.000300 50 mesh 60.150.004000 5 mesh

60.150.000025 500 mesh 60.150.000355 45 mesh 60.150.004750 4 mesh

60.150.000032 450 mesh 60.150.000425 40 mesh 60.150.005600 3.5 mesh

60.150.000038 400 mesh 60.150.000500 35 mesh 60.150.006300 1/4”

60.150.000045 325 mesh 60.150.000600 30 mesh 60.150.008000 5/16”

60.150.000053 270 mesh 60.150.000710 25 mesh 60.150.009500 3/8”

60.150.000063 230 mesh 60.150.000850 20 mesh 60.150.011200 7/16”

60.150.000075 200 mesh 60.150.001000 18 mesh 60.150.012500 1/2”

60.150.000090 170 mesh 60.150.001180 16 mesh 60.150.016000 5/8”

60.150.000106 140 mesh 60.150.001400 14 mesh 60.150.019000 3/4”

60.150.000125 120 mesh 60.150.001700 12 mesh 60.150.025000 1”

60.150.000150 100 mesh 60.150.002000 10 mesh 60.150.050000 2”

60.150.000180 80 mesh 60.150.002360 8 mesh 60.150.075000 3”

60.150.000212 70 mesh 60.150.002800 7 mesh 60.150.100000 4”

60.150.000250 60 mesh 60.150.003350 6 mesh 60.150.125000 5”

AS 450

AS 200 Tap

Material Research

Specification: Applications separation, fractioning, particle size determination Motion of product to be sieved throwing motion with angular momentum Feed material powders, bulk materials, suspensions Measuring range: 25 µm to 125 mm Max. batch / feed capacity : 20 kg Max. number of fractions : 11 / 14 Max. mass of sieve stack : 50 kg Adjustment of sieving parameters Amplitude digital : 0.2 - 2.2 mm Time digital : 1 - 99 min Interval operation : 10 - 99 s Memory for 9 sieving programs Suitable for sieving of wet products Serial interface Suitable sieve diameters 400 mm / 450 mm (18") Height of sieve stack up to 940 mm Dimension : 714W x 435H x 629D mm

THE ONLY 450 MM SIEVE SHAKER THAT REALLY ROCKS

Sieve Shaker—AS 200 Tap

RETSCH analytical sieve shaker are used in research & development, quality control of raw materials, interim and finished products as well as in production monitoring. The AS 200 tap is particularly used for sieve analysis of certain products such as activated carbon, abrasives, metal powder, spices, and diamonds, as specified in the corresponding standards.

Specification : Measuring range : 20 µm to 25 mmFeed capacity : 3 kgMax. number fractions : 7/13Max. mass of sieve stack : 6 kgOscillations / Taps : 280 min-1 / 150 min-1

Dimension : 750 x 650 x 450 mmNet Weight : approx. 68 kg

CYCLONE MILLS

Material Research

JAW CRUSHER <Floor Model>

Benefits at a glance ■ High throughput, high degree of size reduction■ High final fineness (down to d90 <2 mm)■ Continuous gap width setting■ Scale for gap width display■ Zero point adjustment for wear compensation■ Central lubrication (BB 200, BB 300)■ Breaking jaws made of 4 different materials■ No-rebound feed hopper with quick-release clamp■ Brake motor with safety switch■ Easy-to-clean crushing chamber■ Process line versions of BB 200 and BB 300 available■ CE-conforming

BB100

Benefits at a glance ■ Ideal for grinding feeds, grains, forage and similar products■ 3 controlled speeds■ Cyclone separator with 250 ml collecting bottle for quick extraction of sample■ No cross contamination thanks to easy cleaning■ Convenient operating panel■ Professional industrial design with long lifetime

TWISTER

KNIFE MILL

Benefit at a glance■ Quick and gentle grinding and homogenization of foodstuffs■ Variable speed from 500 – 5,000 min-1■ Powerful 1.1 kW industrial motor■ Autoclavable grinding tools■ Easy changing and cleaning of grinding containers■ Interval operation, reverse mode■ Mode for preliminary and fine grinding■ Digital parameter setting■ Memory for 10 parameter combinations

GM300

Material Research

PELLET PRESS “small” solution for XRF analysis

Benefits at a glance■ Produces high quality, stable pellets■ Easy and safe operation■ Pressing tools in 2 sizes; can be evacuated■ Compact benchtop unit■ Conforming to CE requirements

MIXER MILL - MM 200

The mixer mill MM 200 is a laboratory “all-rounder”. It has been developed specially for dry grinding of small amounts of sample. It can mix and homogenize a wide range of materials in only a few seconds. It is also perfectly suitable for the disruption of biological cell as well as for DNA / RNA recovery.

PP25

PLANETARY BALL MILL - PM 100

The Planetary Ball Mill PM 100 pulverizes and mixes soft, medium - hard, to extremely hard, brittle and fibrous materials. It is used wherever the highest degree of fineness is required. Dry and wet grinding can be carried out. The convenient benchtop model with 1 grinding station for grinding jars with a nominal volume of 12 to 500 ml.Both PM 100 models feature Free- Force-Compensation-Sockets (FFCS) which ensure a safe low-vibration run and minimal oscillation transfers to the laboratory bench.

Specification :Max feed : <10 mmMax. final fineness : <1 µm

for colloidal grinding <0.1 µmFeed material : soft, hard, brittle, fibrous - dry or wetFeed quantity : max. 1 x 220 ml

Max. 2 x 20 ml with stacked grinding jarsNet Weight : approx. 80 kgDimension : 630x468x415 mm

Material Research

Specification

Temperature Range :Ambient to 1 600 °CIsothermal temperature accuracy : +/- 1 °CProgrammable temperature scanning rate (heating and cooling) : 0.01 to 100 °C.min-1Furnace cooling : 32 min (1600°C to 50°C)Maximum balance capacity : 20 gWeight range : +/- 1 000 mg - +/- 200 mgWeighing precision : +/- 0.01 %TG resolution : 0.2 μg - 0.02 μgAuto Sampler : 30 samples and 6 references 4-prong gripperDSC rod - Resolution : 0.4 µW / 10 μW dependent on sensor3D Cp rod - Cp Accuracy : < 2 %Vacuum : < 10-1 mbar Evolved gas simultaneous MS, FTIR couplings (option)Gases : Two inlets for gas scanning (inert or reactive) OR 3 carrier gases (option) (MFC from 4 to 200 ml/min) + 1 auxiliary or reactive gas (MFC from 0.3 to 16 ml/min)Weight : 55 kg / 121 lbsDimensions (Height / Width / Depth) : 56 closed, 76 opened / 53 / 58 cm (22.0 closed 29.9 opened / 20.8 / 22.8 in)Power requirements2 : 30 V - 50/60 Hz

Application : With its wide temperature range (ambient to 1600° C) LABSYS evo has a wide range of application for DSC/DTA, TGA, Simultaneous TGA-DSC/DTA, Cp measurements. Various fields of application are possible including polymers and plastic, advanced materials, pharmaceutical compounds, in organic sub stances, thermodynamics (specific Heat Capacity Cp precision within 2 %), energy, etc.

LABSYS EvoTGA, DTA, DSC and Simultaneous

alat lab tambahan 2

Documents

bit data format

automatic

volume plate

microarray

light source

vis spectrophotometer

electrophoresistechnical

technical