alfer® hardware catalogue...hardware catalogue | 97002 | 01 2017 | 71708 combitech ® tool...

2

ALO

ALCR

AGP

ALU

ALK

AGK

ALP

ALG

EDL

ALC

ALX

ALM

STA

GUS

SGC

FER

ABS

CU

EHO

EPDM

GUM

PS

PC

MES

PVC

POM

EVA

PU

PE

PET

TPE

PA

PP

alfer® aluminium Gesellschaft mbH | Horheim, Industriestraße 7 | D-79793 Wutöschingen | Germany | Telephone +49 77 46 92 01-0 | Fax +49 77 46 92 01-92 | [email protected] | www.alfer.com

Hardware catalogueExplanations

Colour guide materials

Aluminium casting, tumbling polished

Aluminium casting, powder-coated

alferceram®, ceramic powder-coated aluminium

Aluminium chrome-plated

Aluminium, vibratory finish

Aluminium, tumble polished

Brass-plated aluminium

alferoxal®, multicolour aluminium, anodized

Powder-coated aluminium

Uncoated aluminium

Anodized aluminium

Stainless steel

Hard ferrite

Cast iron

Injection moulded, chrome-plated

Steel or steel, galvanized

Brass, solid or brass, shiny solid

Copper, solid

Plastic, acrylonitrile butadiene styrene

Plastic, ethylene propylene diene rubber

Plastic, ethylene vinyl acetate

Rubber

Plastic, polyamide

Plastic, polycarbonate

Plastic, polyethylene

Plastic, polyethylene terephthalate

Plastic, polyoxymethylene

Plastic, polypropylene

Plastic, polystyrene

Plastic, polyurethane

Plastic, polyvinylchloride

Plastic, thermoplastic elastomers

Real wood

Explanations Brand NamesPackaging

loose: The item is not packed.shrink-wrapped: The loose item is shrink-wrapped in transparent PE foil. shrink-wrapped SS: The shrink-wrapped item comes with a SS Euro-per-foration allowing it to be suspended.SS bag: The item is packed in a transparent LDPE bag (Euro-perforation). SS polybag: The article comes in a PE tube.SS box: the item is packed in a transparent box with Euro-perforation. SS cardboard box: The item comes in a SS cardboard box.on roll: The item comes on a roll and can be cut to measure.sealed: The item is sealed with a transparent PE foil.foil-wrapped, one-sided: The item is covered on one side with a protective foil.rolled in a box: The item is packed rolled up in a box.clap-pac: The item comes in impact-resistant, transparent, PVC snapshut packaging (multi-perforation) and can be re-closed.Min. OU: The minimum order unit specifies both the minimum order quantity of an item and the order unit.e. g.: Min. OU = 5 pcs.: means that orders must either be for a minimumof 5 pieces of this item, or multiples thereof.PU: Packaging unit.

Important Note!The following trademarks (®, M. R.) are registered for the alfer® aluminium Gesellschaft mbH, D-79793 Wutoeschingen, (as of: 01. 09. 2013)

alfer® � �

alferoxal® B D F I L � A P �

alferceram® B D F I L � A P �

clipstech® � �

combitech® � � �

cabelino® � �

logika® �

ferroplatan® �

coaxis® � � �

x-star® � �

easyrack® �

The use of these rights is permitted only upon expressed authorization by alfer® aluminium Gesellschaft mbH, D-79793 Wutoeschingen.

In the heart of Europe

Nestled between the Upper Rhine and the Southern Black Forest is the Wutachtal Valley. Close to both Switzerland

and France, this has been home to many world leading aluminium specialists for decades. Today, it is Europe’s largest

connected economic area for the production and processing of aluminium. It is therefore unsurprising that the region is

also known as the ‘Aluminium Valley’. This is also the place where the alfer® success story began in 1973 in Wutöschin-

gen, Baden-Württemberg. Since then, alfer® has used this site to develop a whole range of aluminium profiles, primarily

for DIY enthusiasts and tradespeople, which set even international standards.

5


Hard

ware catalogue | 97002 | 01 2017 | 71708

Steel profiles chapter 6

Standard profiles | Stainless steelStandard profiles | Steel, rolledStandard profiles | Steel, galvanizedStandard profiles | Steel, drawnStandard profiles | ferroplatan®

Hardware catalogueSection overview

Index | Product names A–Z IND-4 – IND-5

Explanations page 2

Index | Item number summary IND-6 – IND-19

Terms and Conditions of Supply and Payment IND-20

Available in a choice of colours IND-21

alfer® makes you mobile IND-1

alfer® ranges IND-2 – IND-3

combitech® system | Basis

http://qr.alfer.com/katsort01

1.03


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

combitech® system | BasisRange overview

Systematic construction

You have an idea – we have the perfect system solution! With the

well-thought-out combitech® system from alfer®, you can give

your imagination free reign. Whether for shelves, a hothouse or a

handcart – discover the astonishingly versatile uses and transform

your ideas into reality with brilliant ease.

The system profiles in the combitech® basic range are suitable for

universal use and come in a rust-proof and weather-resistant al-

uminium version or a lower cost, a lightweight plastic alternative

with many uses. All system components can be easily handled, are

perfectly aligned to one another and can be flexibly combined. The

extremely useful drilling alignment grooves for precisely positioned

drill holes are an added bonus. DIY has never been easier. What is

your next project?

Systematically accurate fit

The patented combitech® system from alfer® is characterised by

outstanding fit accuracy. All profile types can be reliably combined

and always fit perfectly into profiles of the next size up whatever

their cross-section. In short: everything fits perfectly in and over

everything else – like a glove and without any issue thanks to

combitech®.

Our patented drilling alignment groove

Precise drilling made easy: all combitech® profiles come with drill-

ing alignment grooves for precisely aligned drill holes. For example,

combitech® round tubes have four drilling alignment grooves posi-

tioned at 90° angles to one another.

Our tip: if you want to drill straight through a tube, start by drilling

vertically through the upper wall. Next, rotate the tube 180°, deter-

mine the precise position of the opposite drill hole on the alignment

groove and then drill the second wall. The two drill holes are now

precisely opposite one another without leaving any unsightly drill

burrs on their outer edges.

1.04


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


The perfect twist: Metric threaded rods and threaded tubes

alfer® metric threaded rods and threaded tubes offer stability and

are characterised by premium quality and impressive fit accuracy.

The metric threaded rods are available in different materials:

galvanised steel, stainless steel, brass and plastic. The threaded

tube is made from galvanised steel.

Systematically versatile: System accessories

Benefit from the impressively large range of alfer® system acces-

sories. The huge range spans from end caps, gussets and furniture

casters through compression/tension springs to nuts and screws. In

short: the range is as diverse as your ideas. Start making something!

Practical assistants: Tools range

Using the right tool makes work twice the fun, right? alfer® therefore

offers a whole range of useful, tried-and-tested tool solutions that

guarantee to help you transform your ideas into reality more quickly

and effortlessly. We bet that our tools have what it takes to become

your favourites!

1.05

ALP

STA

MES

PVC

ALG

EDL

PA

ALU

ALX

PE

EDL

PVC

PA

MES

ALU

STA


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Metric threaded rods and threaded tubes 1.29 – 1.30

· Metric threaded rod· Metric threaded tube

System accessories 1.31 – 1.47

· Adjustable foot· Adjustable foot, black, with thread· Adjustable ring, DIN 705· Anchor nut, DIN 7965· Compression spring· Countersunk screw set· End cap, rectangular· End cap, round· End cap, square· Eye bolt, DIN 444· Furniture caster· Gusset· Hand wheel, black, with thread· Hexagon cap· Hexagon cap nut, self-locking, DIN 986· Hexagon connection sleeve· Hexagon nut· Hexagon nut, DIN 934· Hexagon nut, self-locking, DIN 985· Hinged plate, black, with thread· Knurled nut, black, with thread· Lifting eye nut, DIN 582· Rubber buffer, black, with double-sided thread

· Rubber buffer, black, with thread· Rubber cap· Serrated lock washer, DIN 6798A

· Set: Hexagon nuts, DIN 934, with washers, DIN 9021

· Shelf unit foot· Square nut, self-locking; DIN 557· Step drill· Tension spring· Threaded plug· Turnbuckle with hook and eye, DIN 1480· Universal deburrer· Washer, DIN 125· Washer, DIN 9021· Wing nut, American shape

System profiles 1.07 – 1.28

· Angle, equal-sided· Angle, unequal-sided· Double tube· Double tube, vibratory finish· Flat bar· H section· Long tube sleeve· Long tube sleeve, vibratory finish· Rectangular tube· Rectangular U· Round bar· Round tube· Short tube sleeve· Short tube sleeve, vibratory finish· Square rod· Square T· Square tube· Square tube, 1 branch· Square tube, 1 branch offset· Square tube, 2 branches 180º· Square tube, 2 branches inside

· Square tube, 2 branches offset· Square U· Square U, 2 branches 180º· T-profile· Triple tube, vibratory finish· Tube-tube 90º, vibratory finshing· Tube, 1 long branch· Tube, 1 long branch, vibratory finish· Tube, 1 short branch· Tube, 1 short branch, vibratory finish· Tube, 2 branches 180º· Tube, 2 branches 180º, vibratory finish· Tube, 2 branches 90º· Tube, 2 branches 90º, vibratory finish


1.06

ALU

STA


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Tool assortment 1.48 – 1.51

· 2 prisms MP 13 (for mitre box MP 10)· Builder’s square with spirit level· Maxi-saw· Multi-clamp· Piccolo-mitre box MP 7· Precision-mitre box MP 8· Precision-mitre box MP 9· Precision-mitre box with clamp element MP 10

· ‘Profi’ keyhole saw· ‘Profi’-angle, with bevel ruler and

parallel-template· ‘Profi’-ruler· ‘Vario’-mitre box MP 14


1.07

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· Profiles with the unique drill alignment groove

Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b For Packaging

A uncoated 7.5 mm 1.0 mm M 5 loose







combitech® system | BasisSystem profiles | Aluminium


Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Packaging

A uncoated 7.5 mm loose




length: 1.00m

EAN/Itemno.

4001116250828

4001116250842

4001116250866

4001116250880

length: 2.50m

EAN/Itemno.

4001116251023

4001116251047

4001116251061

4001116251085

length: 1.00m

EAN/Itemno.

4001116250026

4001116250040

4001116250064

4001116250088

4001116250101

4001116250125

4001116250149

length: 2.50m

EAN/Itemno.

4001116250224

4001116250248

4001116250262

4001116250286

4001116250309

4001116250323

4001116250347

Round tube

Round bar

http://qr.alfer.com/agew1110200


http://qr.alfer.com/25082






















1.08

ALU

A

ALX

A

ALP

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Uncoated aluminium











Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 1.5 mm M 20 shrink-wrapped


Min. OU: 5 pcs.



A brilliant-white 11.5 mm 1.5 mm M 8 shrink-wrapped




length: 1.00m

EAN/Itemno.

4001116211645

4001116211669

4001116211683

4001116211706

length: 2.50m

EAN/Itemno.

4001116211843

4001116211867

4001116211881

4001116211904

length: 1.00m

EAN/Itemno.

4001116251719

length: 2.50m

EAN/Itemno.

4001116251917

length: 1.00m

EAN/Itemno.

4001116251627

4001116251641

4001116251665

4001116251689

4001116251702

4001116251726

4001116251740

length: 2.50m

EAN/Itemno.

4001116251825

4001116251849

4001116251863

4001116251887

4001116251900

4001116251924

4001116251948

Square tube

Square tube

Square tube




























1.09

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium








Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b Dim. c For Packaging

A uncoated 7.5 mm 12.5 mm 1.0 mm M 5 loose







length: 1.00m

EAN/Itemno.

4001116253225

4001116253249

4001116253263

4001116253287

4001116253300

4001116253324

4001116253348

length: 2.50m

EAN/Itemno.

4001116253423

4001116253447

4001116253461

4001116253485

4001116253508

4001116253522

4001116253546

length: 1.00m

EAN/Itemno.

4001116252426

4001116252440

4001116252464

4001116252488

length: 2.50m

EAN/Itemno.

4001116252648

4001116252662

4001116252686

Square rod

Rectangular tube
























1.10

ALU

A

ALX

A

ALP

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b Packaging

A uncoated 7.5 mm 1.0 mm loose









Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 1.5 mm shrink-wrapped


Min. OU: 5 pcs.



A brilliant-white 7.5 mm 1.0 mm shrink-wrapped




length: 1.00m

EAN/Itemno.

4001116214028

4001116214042

4001116214066

4001116214103

length: 2.50m

EAN/Itemno.

4001116214226

4001116214240

4001116214264

4001116214301

length: 1.00m

EAN/Itemno.

4001116254116

length: 2.50m

EAN/Itemno.

4001116254314

length: 1.00m

EAN/Itemno.

4001116254024

4001116254048

4001116254062

4001116254086

4001116254109

4001116254123

4001116254147

length: 2.50m

EAN/Itemno.

4001116254222

4001116254246

4001116254260

4001116254284

4001116254307

4001116254321

4001116254345

Square U

Square U

Square U




























1.11

ALU

A

ALP

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b Dim. c Packaging

A uncoated 7.5 mm 12.5 mm 1.0 mm loose









Min. OU: 5 pcs.



A brilliant-white 11.5 mm 19.5 mm 1.5 mm shrink-wrapped




Min. OU: 5 pcs.

Uncoated aluminium






length: 1.00m

EAN/Itemno.

4001116255625

4001116255649

4001116255663

4001116255687

length: 2.50m

EAN/Itemno.

4001116255823

4001116255847

4001116255861

4001116255885

length: 1.00m

EAN/Itemno.

4001116214844

4001116214868

4001116214882

length: 2.50m

EAN/Itemno.

4001116215049

4001116215063

4001116215087

length: 1.00m

EAN/Itemno.

4001116254826

4001116254840

4001116254864

4001116254888

4001116254901

4001116254925

4001116254949

length: 2.50m

EAN/Itemno.

4001116255021

4001116255045

4001116255069

4001116255083

4001116255106

4001116255120

4001116255144

Rectangular U

Angle, equal-sided

Rectangular U
































1.12

ALP

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Uncoated aluminium


Continued from the previous page





4001116255908

4001116255922

4001116255946

4001116255700

4001116255724

4001116255748


Min. OU: 5 pcs.








Min. OU: 5 pcs.

Uncoated aluminium









length: 1.00m

EAN/Itemno.

4001116256424

4001116256448

4001116256462

4001116256486

4001116256509

4001116256523

4001116256547

length: 2.50m

EAN/Itemno.

4001116256622

4001116256646

4001116256660

4001116256684

4001116256707

4001116256721

4001116256745

length: 1.00m

EAN/Itemno.

4001116215667

4001116215681

4001116215704

4001116215728

length: 2.50m

EAN/Itemno.

4001116215865

4001116215889

4001116215902

4001116215926

length: 2.50m

EAN/Itemno.

length: 1.00m

EAN/Itemno.

Angle, unequal-sided

Angle, equal-sided































1.13

ALP

A

ALU

A

ALP

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.








Min. OU: 5 pcs.

Uncoated aluminium










Min. OU: 5 pcs.







length: 1.00m

EAN/Itemno.

4001116218064

4001116218088

4001116218101

4001116218125

length: 2.50m

EAN/Itemno.

4001116218262

4001116218286

4001116218309

4001116218323

length: 1.00m

EAN/Itemno.

4001116258022

4001116258046

4001116258060

4001116258084

4001116258107

4001116258121

4001116258145

length: 2.50m

EAN/Itemno.

4001116258220

4001116258244

4001116258268

4001116258282

4001116258305

4001116258329

4001116258343

length: 1.00m

EAN/Itemno.

4001116216466

4001116216480

4001116216503

length: 2.50m

EAN/Itemno.

4001116216664

4001116216688

4001116216701


Flat bar

Flat bar
































1.14

ALU

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis





A brilliant-white 35.5 mm 3.0 mm shrink-wrapped 40011162183474001116218149

Min. OU: 5 pcs.

Uncoated aluminium







Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Uncoated aluminium




length: 1.00m

EAN/Itemno.

4001116286704

4001116287008

length: 2.50m

EAN/Itemno.

4001116287206

length: 1.00m

EAN/Itemno.

4001116286711

length: 1.00m

EAN/Itemno.

4001116257223

4001116257247

4001116257261

4001116257285

length: 2.50m

EAN/Itemno.

4001116257421

4001116257445

4001116257469

4001116257483

length: 2.50m

EAN/Itemno.

length: 1.00m

EAN/Itemno.

H section

T-profile

Square T


















1.15

ALU

A

ALX

A

ALP

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium











Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 45.5 mm 1.5 mm M 20 shrink-wrapped


Min. OU: 5 pcs.



A brilliant-white 23.5 mm 45.5 mm 1.5 mm M 20 shrink-wrapped

length: 1.00m

EAN/Itemno.

4001116218903

length: 2.50m

EAN/Itemno.

4001116219108

length: 1.00m

EAN/Itemno.

4001116258916

length: 2.50m

EAN/Itemno.

4001116259111

length: 1.00m

EAN/Itemno.

4001116258824

4001116258848

4001116258862

4001116258886

4001116258909

4001116258923

4001116258947

length: 2.50m

EAN/Itemno.

4001116259029

4001116259043

4001116259067

4001116259081

4001116259104

4001116259128

4001116259142

Square tube, 1 branch
























1.16

ALU

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Uncoated aluminium











Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b Dim. c Dim. d For Packaging

A uncoated 7.5 mm 14.0 mm 1.0 mm 4.5 mm M 5 loose


length: 1.00m

EAN/Itemno.

4001116286728

4001116287015

length: 2.50m

EAN/Itemno.

4001116287213

length: 1.00m

EAN/Itemno.

4001116286698

4001116260902

length: 2.50m

EAN/Itemno.

4001116261107

length: 1.00m

EAN/Itemno.

4001116259623

4001116259647

4001116259661

4001116259685

4001116259708

4001116259722

4001116259746

length: 2.50m

EAN/Itemno.

4001116259821

4001116259845

4001116259869

4001116259883

4001116259906

4001116259920

4001116259944

Square U, 2 branches 180º

Square tube, 1 branch offset

Square tube, 2 branches 180º
























1.17

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium






Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Uncoated aluminium






length: 1.00m

EAN/Itemno.

4001116260629

4001116260643

4001116260667

4001116260681

length: 1.00m

EAN/Itemno.

4001116260025

4001116260100

length: 2.50m

EAN/Itemno.

4001116260308

length: 1.00m

EAN/Itemno.

4001116259227

4001116259302

length: 2.50m

EAN/Itemno.

4001116259500

Square tube, 2 branches inside

Tube, 1 short branch

Square tube, 2 branches offset














1.18

ALG

A

ALU

A

ALG

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.


Colour Length Dim. a Dim. b Dim. c Dim. d For PU Packaging

A vibratory finish 19.5 mm 7.5 mm 12.5 mm 1.5 mm 5.5 mm M 5 2 pieces SS box






Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.





EAN/ Itemno.

4001116261244

4001116261282

length: 1.00m

EAN/Itemno.

4001116261442

4001116261480

EAN/ Itemno.

4001116260421

4001116260445

4001116260469

4001116260483

Tube, 1 short branch, vibratory finish

Tube, 1 long branch, vibratory finish

Tube, 1 long branch












1.19

ALU

A

ALU

A

ALG

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· Can be combined with the tube, 1 branch short, item no. 26062 and 26042 dim. d = 5.5 mm) for the hinge

Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.




A vibratory finish 43.5 mm 19.5 mm 65.5 mm 3.0 mm 16.5 mm M 16 1 piece SS box

EAN/ Itemno.

4001116262043

4001116262081

length: 1.00m

EAN/Itemno.

4001116262241

4001116262289

length: 1.00m

EAN/Itemno.

4001116286681

Round bar

Tube, 2 branches 180º, vibratory finish

Tube, 2 branches 180º









1.20

ALU

A

ALG

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Uncoated aluminium






Min. OU: 5 pcs.




A vibratory finish 43.5 mm 19.5 mm 51.8 mm 3.0 mm 16.5 mm M 16 1 piece SS box


Min. OU: 5 pcs.

Uncoated aluminium



length: 1.00m

EAN/Itemno.

4001116263842

EAN/ Itemno.

4001116262845

4001116262883

length: 1.00m

EAN/Itemno.

4001116263040

4001116263088

Tube, 2 branches 90º

Double tube

Tube, 2 branches 90º, vibratory finish









1.21

ALG

A

ALG

A

ALG

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.


Colour Length Dim. a Dim. b Dim. c For PU Packaging

A vibratory finish 27.5 mm 11.5 mm 27.5 mm 1.5 mm M 8 2 pieces SS box



Min. OU: 5 pcs.





Min. OU: 5 pcs.




EAN/ Itemno.

4001116265242

EAN/ Itemno.

4001116264443

EAN/ Itemno.

4001116263644

Double tube, vibratory finish

Tube-tube 90º, vibratory finshing

Triple tube, vibratory finish







1.22

ALU

A

ALG

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Uncoated aluminium






Min. OU: 5 pcs.






Min. OU: 5 pcs.

Uncoated aluminium




length: 1.00m

EAN/Itemno.

4001116267048

4001116267086

EAN/ Itemno.

4001116266041

4001116266089

length: 1.00m

EAN/Itemno.

4001116266249

4001116266287

Short tube sleeve

Long tube sleeve

Short tube sleeve, vibratory finish










1.23

ALG

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.





EAN/ Itemno.

4001116266843

Long tube sleeve, vibratory finish



1.24

PVC

A

PVC

A

PVC

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Plastic (hard PVC)


A white 7.5 mm 1.0 mm M 5 loose







combitech® system | BasisSystem profiles | Plastic (hard PVC)


Min. OU: 5 pcs.

Plastic (hard PVC)


A white 7.5 mm loose





Min. OU: 5 pcs.

Plastic (hard PVC)





length: 1.00m

EAN/Itemno.

4001116212826

4001116212840

4001116212864

length: 2.50m

EAN/Itemno.

4001116213021

4001116213045

4001116213069

length: 1.00m

EAN/Itemno.

4001116211225

4001116211249

4001116211263

4001116211287

length: 2.50m

EAN/Itemno.

4001116211423

length: 1.00m

EAN/Itemno.

4001116210426

4001116210440

4001116210464

4001116210488

4001116210501

4001116210525

4001116210549

length: 2.50m

EAN/Itemno.

4001116210624

4001116210648

4001116210662

4001116210686

4001116210709

4001116210723

Round tube

Square rod

Round bar




























1.25

PVC

A

PVC

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Plastic (hard PVC)











Min. OU: 5 pcs.

Plastic (hard PVC)


A white 7.5 mm 12.5 mm 1.0 mm M 5 loose





length: 1.00m

EAN/Itemno.

4001116213625

4001116213649

4001116213663

4001116213687

4001116213700

length: 2.50m

EAN/Itemno.

4001116213823

4001116213847

4001116213861

4001116213885

4001116213908

length: 1.00m

EAN/Itemno.

4001116212024

4001116212048

4001116212062

4001116212086

4001116212109

4001116212123

4001116212147

length: 2.50m

EAN/Itemno.

4001116212222

4001116212246

4001116212260

4001116212284

4001116212307

4001116212321

4001116212345

Square tube

Rectangular tube



























1.26

PVC

A

PVC

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis


Min. OU: 5 pcs.

Plastic (hard PVC)


A white 7.5 mm 1.0 mm loose









Min. OU: 5 pcs.

Plastic (hard PVC)


A white 7.5 mm 12.5 mm 1.0 mm loose







length: 1.00m

EAN/Itemno.

4001116215223

4001116215247

4001116215261

4001116215285

4001116215308

4001116215322

4001116215346

length: 2.50m

EAN/Itemno.

4001116215421

4001116215445

4001116215469

4001116215483

4001116215506

4001116215520

4001116215544

length: 1.00m

EAN/Itemno.

4001116214424

4001116214448

4001116214462

4001116214486

4001116214509

4001116214523

4001116214547

length: 2.50m

EAN/Itemno.

4001116214622

4001116214646

4001116214660

4001116214684

4001116214707

4001116214721

4001116214745

Rectangular U

Square U































1.27

PVC

A

PVC

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Plastic (hard PVC)











Min. OU: 5 pcs.

Plastic (hard PVC)









length: 1.00m

EAN/Itemno.

4001116216022

4001116216046

4001116216060

4001116216084

4001116216107

4001116216121

4001116216145

length: 2.50m

EAN/Itemno.

4001116216220

4001116216244

4001116216268

4001116216282

4001116216305

4001116216329

4001116216343

length: 1.00m

EAN/Itemno.

4001116216824

4001116216848

4001116216862

4001116216886

4001116216909

4001116216923

4001116216947

length: 2.50m

EAN/Itemno.

4001116217029

4001116217043

4001116217067

4001116217081

4001116217104

4001116217128

4001116217142


Angle, equal-sided































1.28

PVC

A

PVC

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Min. OU: 5 pcs.

Plastic (hard PVC)







Min. OU: 5 pcs.

Plastic (hard PVC)










length: 1.00m

EAN/Itemno.

4001116218422

4001116218446

4001116218460

4001116218484

4001116218507

4001116218521

4001116218545

length: 2.50m

EAN/Itemno.

4001116218620

4001116218644

4001116218668

4001116218682

4001116218705

4001116218729

4001116218743

length: 1.00m

EAN/Itemno.

4001116217623

4001116217647

4001116217661

4001116217685

length: 2.50m

EAN/Itemno.

4001116217821

4001116217845

4001116217869

4001116217883

Flat bar

Square T

























1.29

STA

A

EDL

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Galvanized steel

Colour Dim. Packaging

A galvanized M 3 loose












combitech® system | BasisMetric threaded rods and threaded tubes

Min. OU: 5 pcs.

Stainless steel V2A


A stainless steel M 3 loose









length: 1.00m

EAN/Itemno.

4001116300202

4001116300219

4001116300226

4001116300233

4001116300240

4001116300257

4001116300264

4001116300288

4001116300295

length: 1.00m

EAN/Itemno.

4001116300004

4001116300011

4001116300028

4001116300035

4001116307072

4001116300042

4001116300059

4001116300066

4001116300073

4001116300080

4001116307188

4001116300097

length: 2.00m

EAN/Itemno.

4001116300141

4001116300158

4001116300165

4001116300189

4001116300196

Metric threaded rod

Metric threaded rod





























1.30

MES

A

PA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Min. OU: 5 pcs.

Solid brass


A brass M 3 loose

A brass M 4 loose

A brass M 5 loose

A brass M 6 loose

A brass M 8 loose

A brass M 10 loose

combitech® system | BasisMetric threaded rods and threaded tubes

Min. OU: 5 pcs.

Plastic (PA)


A natural M 5 loose

A natural M 6 loose

A natural M 8 loose

· Matching nut, item no. 3015

Min. OU: 5 pcs.

Galvanized steel

Colour Dim. 1 Dim. 2 Packaging

A galvanized M 10 1,0 mm loose

length: 1.00m

EAN/Itemno.

4001116348013

length: 1.00m

EAN/Itemno.

4001116300424

4001116300431

4001116300448

length: 1.00m

EAN/Itemno.

4001116300301

4001116300318

4001116300325

4001116300332

4001116300349

4001116300356

Metric threaded rod

Metric threaded tube

Metric threaded rod














1.31

ALU

A

STA

A

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a PU Packaging

A uncoated 60.0 mm 4 pieces SS box

A uncoated 110.0 mm 2 pieces SS box

A uncoated 160.0 mm 1 piece SS box

combitech® system | BasisSystem accessories

· Drill large drill holes easily and without drilling rigs · Step drill with 7 integrated drill steps / hole diameters; for a size 10 drill chuck · Drill holes correspond to the combitech® dimensions, plus 0.2 mm of tolerance

Min. OU: 5 pcs.

Steel/HSS

For hole dimensions Packaging

A 4,8 / 7,7 / 11,7 / 15,7 / 19,7 / 23,7 / 29,7 mm clap-pac

· Deburred edges prevent injuries · Makes it easier to insert the connect connectors

Min. OU: 5 pcs.

Colour Packaging

A blue SS box

EAN/ Itemno.

4001116286612

EAN/ Itemno.

4001116297991

EAN/ Itemno.

4001116297960

4001116297977

4001116297984

Gusset

Universal deburrer

Step drill









1.32

PE

A

PE

A

PE

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

· The round end cap fits into the combitech® round tubes of the appropriate size

Min. OU: 5 pcs.

Plastic (PE)


A black 11.5 mm 4 pieces SS box







· The rectangular end cap fits into the combitech® rectangular tubes of the appropriate size

Min. OU: 5 pcs.

Plastic (PE)

Colour Dim. a Dim. b PU Packaging

A black 19.5 mm 35.5 mm 2 pieces SS box

A black 23.5 mm 43.5 mm 2 pieces SS box

· The square end cap fits into the combitech® square tubes of the appropriate size

Min. OU: 5 pcs.

Plastic (PE)








EAN/ Itemno.

4001116298240

4001116298264

4001116298288

4001116298301

4001116298325

4001116298349

EAN/ Itemno.

4001116298486

4001116298509

EAN/ Itemno.

4001116298042

4001116298066

4001116298080

4001116298103

4001116298127

4001116298141

End cap, round

End cap, square

End cap, rectangular


















1.33

PA

A

STA

A

PVC

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· Suitable for 23.5 square mm tube and for M 10 screws/threaded rods · Connects 2 square tubes or another component to a square tube

Min. OU: 5 pcs.

Plastic (PA)

Colour Dim. a Dim. d PU Packaging

A black 23.5 mm M 10 2 pieces SS box


· Furniture casters with an M 10 thread, suitable for threaded plugs · Soft and hard casters are available · Casters with a load capacity of 50 kg

Min. OU: 5 pcs.

Steel/plastic (PU)

Colour Dim. a Dim. d None Packaging

A black 40.0 mm M 10 hard loose

A black 40.0 mm M 10 soft loose

Min. OU: 5 pcs.

Plastic (soft PVC)

Colour Dim. a Dim. b Dim. c For PU Packaging

A black 4.5 mm 10.0 mm 1.2 mm M 5 6 pieces SS box







EAN/ Itemno.

4001116300523

4001116300530

4001116300547

4001116300554

4001116300561

4001116300585

4001116300592

EAN/ Itemno.

4001116303852

4001116303869

EAN/ Itemno.

4001116303838

Threaded plug

Rubber cap

Furniture caster














1.34

PA

A

PA

A

PE

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

· To smooth out bumps in the floor · Suitable for 23.5 mm square tube

Min. OU: 5 pcs.

Plastic (PA)




· For all even-branched combitech® system profile brackets with dimension a = 23.5 mm or 35.5 mm

Min. OU: 5 pcs.

Plastic (PA)




Min. OU: 5 pcs.

Plastic (PE)

Colour For Wrench size PU Packaging

A black M 5 8 6 pieces SS box






A black M 20 30 1 piece SS box

EAN/ Itemno.

4001116301223

4001116301230

4001116301247

4001116301254

4001116301261

4001116301285

4001116301292

EAN/ Itemno.

4001116394904

4001116394911

EAN/ Itemno.

4001116303845

Adjustable foot

Hexagon cap

Shelf unit foot














1.35

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Standard version, steel

Dim. Dim. d Dim. Da Dim. Di Dim. Lo Spring rate PU Packaging

A M 5 0.7 mm 7.5 mm 6.1 mm 35.8 mm 0.819 N/mm 2 pieces SS box






A M 16 1.25 mm 19.0 mm 16.5 mm 75.0 mm 0.523 N/mm 1 piece SS box









· Standard version, steel

Min. OU: 5 pcs.

Standard version, steel









EAN/ Itemno.

4001116299025

4001116299049

4001116299063

4001116299087

4001116299100

4001116299124

4001116299148

EAN/ Itemno.

4001116298622

4001116298820

4001116298646

4001116298844

4001116298660

4001116298868

4001116298684

4001116298882

4001116298905

4001116298707

4001116298721

4001116298929

4001116298745

4001116298943

Compression spring

Tension spring
























1.36

STA

A

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

· More powerful version in steel

Min. OU: 5 pcs.

More powerful version in steel










Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. h Packaging

A M 5 50.0 mm SS box

A M 8 110.0 mm SS box

Min. OU: 5 pcs.

Galvanized steel

Screw size Length PU Packaging

A M 2 4.0 mm 20 pieces each, SS box



EAN/ Itemno.

4001116286841

4001116286834

4001116286858

EAN/ Itemno.

4001116301926

4001116301940

EAN/ Itemno.

4001116299223

4001116299247

4001116299261

4001116299285

4001116299308

4001116299322

4001116299346

Tension spring

Countersunk screw set

Turnbuckle with hook and eye, DIN 1480
















1.37

STA

A

EDL

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· For metric threaded tube M 10 × 1

Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. b Wrench size PU Packaging

A M 10 3.0 mm 14 4 pieces SS box


Min. OU: 5 pcs.

Stainless steel V2A










A M 20 16.0 mm 30 1 piece SS box

Min. OU: 5 pcs.

Galvanized steel






EAN/ Itemno.

4001116300608

4001116300615

4001116300622

4001116300639

EAN/ Itemno.

4001116300707

4001116300714

4001116300721

4001116300738

4001116300745

4001116300752

4001116300769

4001116300783

4001116300790

EAN/ Itemno.

4001116302152

Hexagon nut

Hexagon nut, DIN 934

Hexagon nut, DIN 934


















1.38

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Galvanized steel










4001116300646

4001116300653

4001116300660

4001116300677

4001116300684

4001116300691

Min. OU: 5 pcs.

Galvanized steel











Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. h Dim. t Wrench size PU Packaging

A M 5 10.0 mm 7.5 mm 8 6 pieces SS box





EAN/ Itemno.

4001116301124

4001116301131

4001116301148

4001116301155

4001116301162

EAN/ Itemno.

4001116301001

4001116301018

4001116301025

4001116301032

4001116301049

4001116301056

4001116301063

4001116301087

4001116301094

EAN/ Itemno.

Hexagon cap nut, self-locking, DIN 986

Hexagon nut, self-locking, DIN 985























1.39

STA

A

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Galvanized steel








Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. b Dim. h PU Packaging

A M 5 25.0 mm 12.0 mm 6 pieces SS box





Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. d1 Dim. d2 Dim. d3 Dim. h Load Packaging

A M 8 36.0 mm 20.0 mm 20.0 mm 36.0 mm 140.0 kg max. SS box

A M 12 54.0 mm 30.0 mm 30.0 mm 53.0 mm 340.0 kg max. SS box

EAN/ Itemno.

4001116301544

4001116301568

EAN/ Itemno.

4001116301421

4001116301438

4001116301445

4001116301452

4001116301469

EAN/ Itemno.

4001116301322

4001116301339

4001116301346

4001116301353

4001116301360

Square nut, self-locking; DIN 557

Lifting eye nut, DIN 582

Wing nut, American shape
















1.40

PA

A

STA

A

PA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Min. OU: 5 pcs.

Plastic (PA)

Dim. d Dim. d1 Dim. d2 Dim. h Dim. k PU Packaging

A M 5 15.0 mm 10.0 mm 10.5 mm 5.7 mm 4 pieces SS box

A M 8 25.5 mm 16.0 mm 18.0 mm 9.7 mm 1 piece SS box


Min. OU: 5 pcs.

Steel

Dim. d Dim. d1 Dim. h PU Packaging





A M 12 22.0 mm 30.0 mm 1 piece SS box

Min. OU: 5 pcs.

Plastic (PA)

Dim. d Dim. d1 Dim. d2 Dim. h Dim. k Packaging

A M 8 62.0 mm 20.0 mm 40.0 mm 17.0 mm SS box

A M 10 62.0 mm 24.0 mm 40.0 mm 17.0 mm SS box

EAN/ Itemno.

4001116302244

4001116302251

EAN/ Itemno.

4001116301728

4001116301735

4001116301742

4001116301759

4001116301766

EAN/ Itemno.

4001116301629

4001116301643

Knurled nut, black, with thread

Hand wheel, black, with thread

Anchor nut, DIN 7965













1.41

STA

A

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. h PU Packaging

A M 5 30.0 mm 4 pieces SS box




A M 12 30.0 mm 1 piece SS box


Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. d1 Dim. h Wrench size Packaging

A M 8 30.0 mm 30.0 mm 14 SS box

Min. OU: 5 pcs.

Steel/rubber

Dim. d Dim. d1 Dim. t Dim. h Packaging

A M 8 30.0 mm 8.5 mm 20.0 mm SS box

EAN/ Itemno.

4001116303647

EAN/ Itemno.

4001116302046

EAN/ Itemno.

4001116301827

4001116301834

4001116301841

4001116301858

4001116301865

Hexagon connection sleeve

Rubber buffer, black, with thread

Hinged plate, black, with thread











1.42

STA

A

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Min. OU: 5 pcs.

Steel/rubber

Dim. d Dim. d1 Dim. t Dim. h Packaging

A M 8 30.0 mm 8.5 mm 20.0 mm SS box


Min. OU: 5 pcs.

Galvanized steel/plastic (PVC)

Dim. d Dim. h Dim. t Wrench size Packaging

A M 8 54.0 mm 46.0 mm 30 SS box

Min. OU: 5 pcs.

Galvanized steel

Dim. d Dim. d1 Dim. d2 Dim. t Dim. h PU Packaging



EAN/ Itemno.

4001116303425

4001116303449

EAN/ Itemno.

4001116303548

EAN/ Itemno.

4001116303746

Rubber buffer, black, with double-sided thread

Eye bolt, DIN 444

Adjustable foot, black, with thread








1.43

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Galvanized steel

For thread Dim. d Dim. d1 Dim. d2 Dim. b PU Packaging

A M 5 5.0 mm 10.0 mm M 3 6.0 mm 6 pieces SS box




A M 12 12.0 mm 22.0 mm M 6 12.0 mm 1 piece SS box


Min. OU: 5 pcs.

Galvanized steel

Dim. d1 Dim. m Wrench size Dim. d Dim. d2 Dim. h PU Packaging

A M 3 2.4 mm 6 3.2 mm 9.0 mm 0.8 mm 20 pieces each, SS box









A M 20 16.0 mm 30 22.0 mm 60.0 mm 4.0 mm 1 piece each, SS box

EAN/ Itemno.

4001116307706

4001116307713

4001116307720

4001116307737

4001116307744

4001116307751

4001116307768

4001116307775

4001116307782

4001116307799

EAN/ Itemno.

4001116303326

4001116303333

4001116303340

4001116303357

4001116303364

Adjustable ring, DIN 705

Set: Hexagon nuts, DIN 934, with washers, DIN 9021


















1.44

MES

A

EDL

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Min. OU: 5 pcs.

Solid brass










Min. OU: 5 pcs.

Stainless steel









EAN/ Itemno.

4001116307904

4001116307911

4001116307928

4001116307935

4001116307942

4001116307959

4001116307966

EAN/ Itemno.

4001116307805

4001116307812

4001116307829

4001116307836

4001116307843

4001116307850

4001116307867



















1.45

STA

A

EDL

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Galvanized steel

For thread Dim. d Dim. d1 Dim. b PU Packaging

A M 3 3.2 mm 9.0 mm 0.8 mm 10 pieces SS box









A M 20 22.0 mm 60.0 mm 4.0 mm 1 piece SS box


Min. OU: 5 pcs.

Stainless steel V2A











EAN/ Itemno.

4001116302404

4001116302411

4001116302428

4001116302435

4001116302442

4001116302459

4001116302466

4001116302480

4001116302497

EAN/ Itemno.

4001116302305

4001116302312

4001116302329

4001116302336

4001116302343

4001116302350

4001116302367

4001116302374

4001116302381

4001116302398

Washer, DIN 9021

Washer, DIN 9021






















1.46

PA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

Min. OU: 5 pcs.

Plastic (PA)










Min. OU: 5 pcs.

Galvanized steel












EAN/ Itemno.

4001116302701

4001116302718

4001116302725

4001116302732

4001116302749

4001116302756

4001116302763

4001116302770

4001116302787

4001116302794

EAN/ Itemno.

4001116302602

4001116302619

4001116302626

4001116302633

4001116302640

4001116302657

4001116302664

Washer, DIN 9021

Washer, DIN 125




















1.47

EDL

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Stainless steel V2A












Min. OU: 5 pcs.

Galvanized steel









EAN/ Itemno.

4001116303203

4001116303210

4001116303227

4001116303234

4001116303241

4001116303258

4001116303265

EAN/ Itemno.

4001116302800

4001116302817

4001116302824

4001116302831

4001116302848

4001116302855

4001116302862

4001116302886

4001116302893

Washer, DIN 125

Serrated lock washer, DIN 6798A



















1.48

ALU

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

· 2 pre-milled bevel cuts 45° · 1 pre-milled bevel cut 90°, with replaceable wood insert · Stop flange prevents slipping · Clamping element to fasten the workpiece in 3 positions

Min. OU: 5 pcs.

Uncoated aluminium

Dim. a Dim. b Dim. c Packaging

A 30.0 mm 40.0 mm 140.0 mm loose

combitech® system | BasisTool assortment

· 2 pre-milled bevel cuts 45° · 1 pre-milled bevel cut 90°, with replaceable wood insert

Min. OU: 5 pcs.

Uncoated aluminium


A 40.0 mm 57.0 mm 248.0 mm loose

· 2 pre-milled bevel cuts 45° · 1 pre-milled bevel cut 90°, with replaceable wood insert

Min. OU: 5 pcs.

Uncoated aluminium


A 70.0 mm 50.0 mm 248.0 mm loose

EAN/ Itemno.

4001116411229

EAN/ Itemno.

4001116411212

EAN/ Itemno.

4001116411205

Piccolo-mitre box MP 7

Precision-mitre box MP 9

Precision-mitre box MP 8







1.49

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· 2 pre-milled bevel cuts 45° · 1 pre-milled bevel cut 90°, with replaceable wood insert · Foot extension for screw clamp · Clamping element to fasten the workpiece in 3 positions

Min. OU: 5 pcs.

Uncoated aluminium


A 50.0 mm 73.0 mm 248.0 mm loose


· 2 pre-milled bevel cuts 45° · 1 pre-milled bevel cut 90°, with replaceable wood insert · Fastening the workpiece in 3 positions is possible with 2 MP 13 prisms for central fastening

· Foot extension for screw clamp

Min. OU: 5 pcs.

Uncoated aluminium


A 50.0 mm 73.0 mm 248.0 mm SS cardboard box

· Primarily for central fastening of round tubes and round bars

Min. OU: 5 pcs.

Uncoated aluminium

Packaging

A SS bag

EAN/ Itemno.

4001116411267

EAN/ Itemno.

4001116411274

EAN/ Itemno.

4001116411236

Precision-mitre box with clamp element MP 10

2 prisms MP 13 (for mitre box MP 10)

‘Vario’-mitre box MP 14







1.50

ALU

A

STA

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| B

asis

· Reliable tool for milling, drilling, grinding, sawing etc. · Secure clamping in any position, precise and clean alignment · An indispensable aid for clamping strips on the miter

Min. OU: 5 pcs.

Uncoated aluminium

Contents Packaging

A 3-part SS cardboard box


· ‘Profi’ keyhole saw 6T, with 6 saw blades: 46 / 53 / 60 / 67 / 74 / 81 mm · ‘Profi’ keyhole saw 1T, with 1 saw blade: 68 mm for sockets

Min. OU: 5 pcs.

Steel

None Packaging

A type 6T clap-pac

· Continuously adjustable 300 mm long HSS bimetal saw blade for metal, wood, plastic, etc.

· Torsion-resistant, profiled saw bow made of aluminum die cast · Light and easy to hold

Min. OU: 5 pcs.

Uncoated aluminium

Colour Packaging

A uncoated loose

length: 300.0mm

EAN/Itemno.

4001116451119

EAN/ Itemno.

4001116401015

EAN/ Itemno.

4001116451522

Multi-clamp

Maxi-saw

‘Profi’ keyhole saw







1.51

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium

Length Packaging

A 300.0 mm loose


Min. OU: 5 pcs.

Uncoated aluminium

Length Packaging

A 250.0 mm loose

A 300.0 mm loose

A 400.0 mm loose

A 500.0 mm loose

· Thanks to the integrated levels, you can also check whether a wall is vertical or a floor is horizontal

Min. OU: 5 pcs.

Builder’s square with 2 spirit level, aluminium

Length Dim. a Dim. b Packaging

A 1.80 m 100.0 mm 18.0 mm shrink-wrapped




EAN/ Itemno.

4001116318900

4001116318917

4001116318924

4001116318931

EAN/ Itemno.

4001116412158

4001116412165

4001116412172

4001116412189

EAN/ Itemno.

4001116412004

‘Profi’-ruler

Builder’s square with spirit level

‘Profi’-angle, with bevel ruler and parallel-template



http://qr.alfer.com/agbs2152000










combitech® system | connect 23.5 mm


2.03


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

combitech® system | connect 23.5 mmRange overview

Optimum stability guaranteed

The right connection is paramount! The plastic (polyamide)

combitech®-connect connectors give shape to your ideas and

make your creations permanent pieces. Thanks to the robust con-

nectors, square-tube-based structures such as shelves, frames, ta-

bles, gates, pet cages or the like can be fitted together in an instant.

The result: optimum stability and reliability.

Available in black or white, the combitech®-connect connectors

come in different designs. Choose between 90° and 45° connectors

in various shapes. Enjoy the additional design freedom and quickly

and easily make your ideas a reality!

Comprehensive range of system accessories

Is the connection not secure enough? No problem! combitech®-con-

nect adapter sleeves enable you to expand the connector in line

with your requirements. Spigots will fit into profiles more firmly

and securely. To ensure that all connectors are equally secure, the

adapter sleeves come with a practical scale for guidance. The man-

ual universal deburrer enables you to quickly and easily deburr pro-

files to prevent injuries. Blind rivets enable you to create permanent

connections between profiles and connectors.

Further items in the range include: threaded plugs, for which we

offer suitable screw-in furniture casters for example. The practical

adjustable feet can be used to elegantly compensate uneven sur-

faces. And for a clean finish to square tubes, we recommend our

precisely fitting end caps.

Ideas squared: System profiles

Structures made from square tubes not only look great but are also

highly practical. As such, you will be pleased to hear that alfer® of-

fers the perfect square tube profiles for almost every idea. The range

includes many different rust-free and weather-resistant aluminium

profiles as well as lower cost, ultra-lightweight plastic ones. Com-

bined with the practical combitech®-connect connectors, your ide-

as will quickly become a reality. Get started now!

Practical drilling alignment groove

Precise drilling made simpler than ever: both the aluminium and the

plastic square tube profiles come with the unique drilling alignment

groove for precisely aligned drill holes.

2.04

ALP

PVC

ALU

ALX

PA

PA

PE

STA


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m

combitech® system | connect 23.5 mmRange overview

connect connector 23.5 mm | Plastic (PA) 2.05 – 2.09


System profiles 2.13 – 2.18

· 45° 3-D T-connector, left, 3 spigots· 45° 3-D T-connector, right, 3 spigots· 45º nodal connector, 4 spigots· 90º edge connector, 3 spigots· 90º nodal connector, 4 spigots· 90º nodal connector, 5 spigots· 90º nodal connector, 6 spigots· 90º square connector, 2 spigots· 90º T-connector, 3 spigots· Articulated connector, 2 spigots

· Articulated flange connector, 1 spigot· Cross connector, 4 spigots· Flange connector, 1 spigot

· Adapter sleeve· Adjustable foot· End cap, square· Furniture caster· Threaded plug· Universal deburrer

· H section· Square tube· Square tube, 1 branch· Square tube, 1 branch offset· Square tube, 2 branches 180º· Square tube, 2 branches inside· Square tube, 2 branches offset· Square U· Square U, 2 branches 180º

2.05

PA

A B

PA

A B

PA

A B


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (PA)



B black 23.5 mm loose

combitech® system | connect 23.5 mmconnect connector 23.5 mm | Plastic (PA)

Min. OU: 5 pcs.

Plastic (PA)




Min. OU: 5 pcs.

Plastic (PA)




EAN/ Itemno.

4001116285646

4001116285448

EAN/ Itemno.

4001116286049

4001116285844

EAN/ Itemno.

4001116285240

4001116285042

90º square connector, 2 spigots

90º T-connector, 3 spigots

90º edge connector, 3 spigots










2.06

PA

A B

PA

A B

PA

A B


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m

Min. OU: 5 pcs.

Plastic (PA)





Min. OU: 5 pcs.

Plastic (PA)




Min. OU: 5 pcs.

Plastic (PA)




EAN/ Itemno.

4001116286469

4001116286261

EAN/ Itemno.

4001116286445

4001116286247

EAN/ Itemno.

4001116286063

4001116285868

Cross connector, 4 spigots

90º nodal connector, 5 spigots











2.07

PA

A B

PA

A B

PA

A B


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (PA)





Min. OU: 5 pcs.

Plastic (PA)




Min. OU: 5 pcs.

Plastic (PA)




EAN/ Itemno.

4001116285653

4001116285455

EAN/ Itemno.

4001116285257

4001116285059

EAN/ Itemno.

4001116285271

4001116285073


45° 3-D T-connector, right, 3 spigots

45° 3-D T-connector, left, 3 spigots










2.08

PA

A B

PA

A B

PA

A B


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m

Min. OU: 5 pcs.

Plastic (PA)





Min. OU: 5 pcs.

Plastic (PA)




Min. OU: 5 pcs.

Plastic (PA)




EAN/ Itemno.

4001116285660

4001116285462

EAN/ Itemno.

4001116285264

4001116285066

EAN/ Itemno.

4001116286056

4001116285851


Articulated flange connector, 1 spigot

Flange connector, 1 spigot










2.09

PA

A B


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (PA)





EAN/ Itemno.

4001116286452

4001116286254

Articulated connector, 2 spigots




2.10

PA

A

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m

· Enlarges the pin so that the connectors do not sit too loosely in the profile · The further the adapter sleeve is pushed in, the more secure the connec-tion in the profile is

· A scale on the adapter sleeve guarantees even tensioning

Min. OU: 5 pcs.

Plastic (PA)

Colour For PU Packaging

A red 23,5 mm 10 pieces SS box

combitech® system | connect 23.5 mmSystem accessories


Min. OU: 5 pcs.

Colour Packaging

A blue SS box


Min. OU: 5 pcs.

Steel

Colour Dim. Length PU Packaging

A uncoated 5.0 mm 10.0 mm 20 pieces SS box

EAN/ Itemno.

4001116286629

EAN/ Itemno.

4001116286612

EAN/ Itemno.

4001116286605

Adapter sleeve

Blind rivet, 5 mm × 10 mm

Universal deburrer







2.11

PA

A

STA

A

PA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Plastic (PA)

Colour Dim. a Dim. d PU Packaging

A black 23.5 mm M 10 2 pieces SS box


· Furniture casters with an M 10 thread, suitable for threaded plugs · Soft and hard casters are available · Casters with a load capacity of 50 kg

Min. OU: 5 pcs.

Steel/plastic (PU)

Colour Dim. a Dim. d None Packaging

A black 40.0 mm M 10 hard loose

A black 40.0 mm M 10 soft loose

· To smooth out bumps in the floor · Suitable for 23.5 mm square tube

Min. OU: 5 pcs.

Plastic (PA)


A black 23.5 mm SS box

EAN/ Itemno.

4001116303845

EAN/ Itemno.

4001116303852

4001116303869

EAN/ Itemno.

4001116303838

Threaded plug

Adjustable foot

Furniture caster








2.12

PE

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m

· The square end cap fits into the combitech® square tubes of the appropriate size

Min. OU: 5 pcs.

Plastic (PE)




EAN/ Itemno.

4001116298301

End cap, square



2.13

ALU

A

ALX

A

ALP

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium



combitech® system | connect 23.5 mmSystem profiles | Aluminium


Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 1.5 mm M 20 shrink-wrapped


Min. OU: 5 pcs.




length: 0.30m

EAN/Itemno.

4001116284021

length: 1.00m

EAN/Itemno.

4001116211706

length: 2.50m

EAN/Itemno.

4001116211904

length: 0.30m

EAN/Itemno.

4001116284014

length: 1.00m

EAN/Itemno.

4001116251719

length: 2.50m

EAN/Itemno.

4001116251917

length: 0.30m

EAN/Itemno.

4001116284007

length: 1.00m

EAN/Itemno.

4001116251702

length: 2.50m

EAN/Itemno.

4001116251900

Square tube

Square tube

Square tube













2.14

ALU

A

ALX

A

ALP

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m


Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 1.5 mm shrink-wrapped


Min. OU: 5 pcs.




length: 1.00m

EAN/Itemno.

4001116214103

length: 2.50m

EAN/Itemno.

4001116214301

length: 1.00m

EAN/Itemno.

4001116254116

length: 2.50m

EAN/Itemno.

4001116254314

length: 1.00m

EAN/Itemno.

4001116254109

length: 2.50m

EAN/Itemno.

4001116254307

Square U

Square U

Square U










2.15

ALU

A

ALX

A

ALP

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 45.5 mm 1.5 mm M 20 shrink-wrapped


Min. OU: 5 pcs.



A brilliant-white 23.5 mm 45.5 mm 1.5 mm M 20 shrink-wrapped

length: 1.00m

EAN/Itemno.

4001116218903

length: 2.50m

EAN/Itemno.

4001116219108

length: 1.00m

EAN/Itemno.

4001116258916

length: 2.50m

EAN/Itemno.

4001116259111

length: 1.00m

EAN/Itemno.

4001116258909

length: 2.50m

EAN/Itemno.

4001116259104













2.16

ALU

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m


Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Uncoated aluminium



length: 1.00m

EAN/Itemno.

4001116260902

length: 2.50m

EAN/Itemno.

4001116261107

length: 1.00m

EAN/Itemno.

4001116259708

length: 2.50m

EAN/Itemno.

4001116259906

length: 1.00m

EAN/Itemno.

4001116287008

length: 2.50m

EAN/Itemno.

4001116287206

H section

Square tube, 2 branches 180º











2.17

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Uncoated aluminium



length: 1.00m

EAN/Itemno.

4001116259302

length: 2.50m

EAN/Itemno.

4001116259500

length: 1.00m

EAN/Itemno.

4001116260100

length: 2.50m

EAN/Itemno.

4001116260308

length: 1.00m

EAN/Itemno.

4001116287015

length: 2.50m

EAN/Itemno.

4001116287213

Square tube, 1 branch offset

Square tube, 2 branches inside

Square tube, 2 branches offset










2.18

PVC

A B

PVC

A B


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| co

nnec

t 23

.5 m

m


Min. OU: 5 pcs.

Plastic (hard PVC)



B grey 23.5 mm 1.5 mm M 20 loose

combitech® system | connect 23.5 mmSystem profiles | Plastic (hard PVC)


Min. OU: 5 pcs.

Plastic (hard PVC)



B grey 23.5 mm 1.5 mm loose

length: 1.00m

EAN/Itemno.

4001116214509

4001116254505

length: 2.50m

EAN/Itemno.

4001116214707

length: 0.30m

EAN/Itemno.

4001116284052

length: 1.00m

EAN/Itemno.

4001116212109

4001116252105

length: 2.50m

EAN/Itemno.

4001116212307

4001116252303

Square tube

Square U











combitech® system | Sheets, plates and accessories


3.03


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

combitech® system | Sheets, plates and accessoriesRange overview

Various different finishes

Plastic and plain sheets

Plastic sheets and plain sheets are suitable for numerous DIY,

building and decorative projects. To enable quick and easy use, our

range also includes several self-adhesive sheets. Protect doors or

furniture against unsightly scratches, decorate or clad walls and ra-

diators, add a windbreak, privacy screen or sun shade to your patio

or balcony or construct speaker boxes, umbrella stands, window

boxes for flowers and many more items.

The unstructured finishes are available in several versions. Depend-

ing on your requirements and the area of use, transparent plastic

sheets provide perfect visibility or aluminium sheets offer a refined

brass, bronze or stainless steel look. In the case of our coated alu-

minium sheets with a refined realistic marble or wood appearance,

you have to look extremely closely to realise that these are actually

plain sheets. The choice is yours – as too is the opportunity for im-

pressive results!

Authentic stone and wood décors

Thanks to an innovative sublimation procedure, we are able to apply

appealing natural wood and stone designs to aluminium surfaces.

A wonderful side-effect: the finish is not only more UV-resistant but

also considerably more resistant to water and scratches than with

conventional coating procedures.

For a striking appearance: Embossed sheets

Not all sheets are the same – as is clearly demonstrated by our

embossed sheets with different designs. Whether studded sheets

for modern design ideas, creative hammer effect sheets, practi-

cal roughcast and corrugated sheets or highly durable barleycorn

sheets and check plates for uncompromising permanent use in-

doors and out, our diverse range of embossed sheets can be put to

an impressively broad range of attractive uses. Pick one now!

Visionary ideas: Perforated sheets

Sometimes, less is more. This particularly applies to alfer® perfo-

rated sheets. Here, the intentional omission of sections of material

genuinely enhances the appearance. Whether slotted, cross, round

or square hole sheets, the punched holes offer magnificent views

into, out of or through things depending on your perspective and

provide valuable services in many areas. In other words: form and

function are in perfect harmony.

3.04


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

She

ets,

pla

tes

and

acc

esso

ries


Stable and reliable

Expanded metal

alfer® expanded metal is suitable, for example, as a facing solution

for openings around the home. This enables you to reliably protect

yourself, your family and your food supplies from uninvited guests

such as bugs and flies. Furthermore, alfer® expanded metal is an

excellent choice as a construction material for model railways – for

example as the substructure for tunnels, bridges or mountains. De-

pending on the intended use, our expanded metal comes in either al-

uminium or steel. You have the ideas – we have the perfect solution!

Securely enclosed: combitech® Prismatech

Prismatech aluminium profiles can be used, for example, to edge

and frame metal sheets, giving a particularly flat appearance. This

reliably prevents injuries that could be caused by sharp sheet edg-

es. The Prismatech profiles are furthermore able to stabilise weak

sheets and enhance their appearance. Prismatech is the ideal solu-

tion for objects such as signs, picture frames, boxes, crates and fire

guards as well as cladding on doors, drawers and radiators, etc.

Prismatech profiles are suitable for use with various sheet thick-

nesses and materials such as Plexiglas, hardboard and polystyrene

sheets as well as for expanded metals. Even lengths of film or fabric

can be easily edged with the aid of Prismatech profiles to give them

noticeable stability and brand new functionality. Available types in-

clude edge, connecting, corner and hinge profiles – all with our pat-

ented drilling alignment groove for precise work results.

Practical accessories

Accessories such as the sleeve nuts kit, the seal profile, double-sid-

ed sticky tape with intermediate support and the strapless adhesive

cord with covering tape expediently complete the Prismatech range.

combitech®-Multitube

Available in round and square tube designs, the Multitube profiles are

ideal for edging metal sheets. The innovative aluminium profiles offer

a high level of stability and reduce the risk of injury as a result of sharp

sheet edges. Plexiglas, polystyrene sheets and expanded metal can

also be edged without issue. Multitube can also be used to quickly

create signs, advertising boards, flower boxes and pots, partition

walls, rails, privacy screens, noise screens, sun shades, windbreaks

and stable ramps for wheelchairs, wheelbarrows, motorcycles and

more – often making everyday life far easier and more beautiful.

>>>

3.05


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


All-round stability

The round and square tubes in the Multitube range come with a slot

into which the sheet can be pushed until it clicks into the opposite

centring and fixing groove. As with all combitech® products, the

profiles in the Multitube series also come with the unique drilling

alignment groove.

Practical accessories

The sophisticated accessories range includes corner bracket, sus-

pension and sleeve nut kits, edge protection profiles, magnets and

hooks.

For clean finishes: Checker plate profiles and accessories

Our checker plate profiles and small parts are specially tailored to

the needs of DIY enthusiasts and available in several sizes. To en-

able you to make full use of the many options for combining the

comprehensive range of combitech® profiles, we also ensure that

the tried-and-tested combitech® dimensions are strictly adhered

to by the checker plates. This ensures a broad range of usage op-

tions in and around the home. All of our checker plate profiles are

made using state-of-the-art sheet cutting systems and precision

joint bending presses and are characterised by the highest quality.

Customised system accessories

Checker plate case corners reinforce the corners of crates, boxes

and the like while also making them look nicer. Checker plate gus-

sets can be used to join and reinforce structures. Visually match-

ing and precisely fitting edge protection and seal profiles as well as

hooks and magnets complete the diverse combitech® sheet range.

3.06

ALP

ALU

ALU

ALX

ALX

ALP

PC

ALU

PS

PVC

ALX

ALU

STA

STA

STA

ALX

EDL

ALP

CU

MES


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

She

ets,

pla

tes

and

acc

esso

ries

Design and plastic plates 3.09 – 3.11

Sheets 3.12 – 3.16

Embossed sheets 3.17 – 3.21

Perforated sheets 3.22 – 3.24

Stretch metal 3.25 – 3.26

· Design sheet structure· Design sheet with square holes· Design sheet with square studs· Design sheet, corrugated· Design sheet, flexible· Design sheet, smooth· Plastic panel (hard PVC), hot-embossed, self-adhesive· Plastic panel (PC, transparent)

· Plain sheet, steel, untreated, processed· Sheet, aluminium, anodized· Sheet, aluminium, coated· Sheet, aluminium, uncoated· Sheet, raw steel· Sheet, solid brass· Sheet, solid copper· Sheet, stainless steel· Sheet, steel, galvanized

· Barleycorn· Checker plate· Corrugated sheet· Hammer effect sheet· Roughcast sheet· Round studded sheet· Square studded sheet

· Cross hole sheet· Round hole sheet· Slotted hole sheet· Square hole sheet

· Stretch metal


3.07

EVA

ALU

PVC

EVA

STA

FER

PVC

ALG

ALG

ALU

ALU


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Prismatech Accessories 3.27 – 3.30

Multitube Accessories 3.31 – 3.34

Checker plate profiles Accessories 3.35 – 3.38

· Angle profile, one-sided· Angle profile, two-sided· Covering profile, one-sided· Covering profile, one-sided, vibratory finish· Covering profile, two-sided· Hinge profile· Support profile, one-sided· Support profile, two-sided

· Adhesive cord, strapless, with covering tape

· Double adhesive tape with intermediate support

· Prismatech sleeve nut kit, uncoated· Sealing profile

· Angle, equal-sided 120°· Round tube· Square tube

· Bolt clamp· Corner angle 120° set· Corner angle 90° set· Edge protecting profile· Hanging kit· Hard ferrite magnet with plastic case· Mutlitube sleeve nut kit· Perforated sheet hook, large· Perforated sheet hook, small

· Angle, equal-sided· Angle, inside, equal-sided· Angle, unequal-sided· Square U

· Case corner· Gusset· Sealing profile· Square U· Square U, 2 branches 180º


3.08


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

She

ets,

pla

tes

and

acc

esso

ries

combitech® system | Sheets, plates and accessories

3.09

PS

A B C ED

F

PS

A B C

ABS

A B


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (PS), self-adhesive

Colour Thickness Width Long Packaging

A polished black 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

B polished white 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

C mirror finish 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

D dull finish silver 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

E brushed silver 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

F brushed copper 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

combitech® system | Sheets, plates and accessoriesDesign and plastic plates

Min. OU: 5 pcs.





C polished silver 1.2 mm 600.0 mm 1,000.0 mm SS cardboard box

Min. OU: 5 pcs.

Plastic (ABS), self-adhesive




EAN/ Itemno.

4001116480140

4001116480157

EAN/ Itemno.

4001116480119

4001116480126

4001116480133

EAN/ Itemno.

4001116480010

4001116480027

4001116480034

4001116480065

4001116480072

4001116480089

Design sheet, smooth

Design sheet, corrugated

Design sheet, flexible















3.10

PS

A

PS

A

PS

A B C ED


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.


Colour Thickness Dim. a Dim. b Width Long Packaging

A silver 1.13 mm 5.0 mm 15.0 mm 600.0 mm 1,000.0 mm SS cardboard box


Min. OU: 5 pcs.



A silver 2.0 mm 9.0 mm 36.0 mm 600.0 mm 1,000.0 mm SS cardboard box

Min. OU: 5 pcs.



A concrete look 1.33 mm 600.0 mm 1,000.0 mm SS cardboard box

B vintage silver 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

C copper 2.35 mm 600.0 mm 1,000.0 mm SS cardboard box

D silver 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box

E platinum silver 1.43 mm 600.0 mm 1,000.0 mm SS cardboard box

EAN/ Itemno.

4001116480041

4001116480058

4001116480195

4001116480102

4001116480164

EAN/ Itemno.

4001116480188

EAN/ Itemno.

4001116480171

Design sheet with square holes

Design sheet structure

Design sheet with square studs











3.11

ABS

A

PC

A

PVC

A B C ED


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (ABS), self-adhesive


A black 1.13 mm 600.0 mm 1,000.0 mm SS cardboard box


Min. OU: 5 pcs.

Plastic (PC)


A transparent 1.0 mm 250.0 mm 500.0 mm loose

Min. OU: 5 pcs.

Plastic (hard PVC), hot-embossed, self-adhesive

Colour Thickness Width Long PU Packaging

A silver 1.0 mm 300.0 mm 300.0 mm 2 pieces sealed

A silver 1.0 mm 400.0 mm 600.0 mm 1 piece sealed

B champagne 1.0 mm 300.0 mm 300.0 mm 2 pieces sealed

B champagne 1.0 mm 400.0 mm 600.0 mm 1 piece sealed

C titanium 1.0 mm 300.0 mm 300.0 mm 2 pieces sealed

C titanium 1.0 mm 400.0 mm 600.0 mm 1 piece sealed

D stainless steel visual effect 1.0 mm 300.0 mm 300.0 mm 2 pieces sealed

D stainless steel visual effect 1.0 mm 400.0 mm 600.0 mm 1 piece sealed

E chrome look 1.0 mm 300.0 mm 300.0 mm 2 pieces sealed

E chrome look 1.0 mm 400.0 mm 600.0 mm 1 piece sealed

EAN/ Itemno.

4001116386022

4001116386121

4001116386015

4001116386114

4001116386039

4001116386138

4001116386046

4001116386145

4001116386008

4001116386107

EAN/ Itemno.

4001116383540

EAN/ Itemno.

4001116480096

Design sheet structure

Plastic panel (hard PVC), hot-embossed, self-adhesive

Plastic panel (PC, transparent)
















3.12

ALU

A

ALP

A B C ED


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Uncoated aluminium


A uncoated 0.3 mm 250.0 mm 500.0 mm sealed

A uncoated 0.3 mm 200.0 mm 1,000.0 mm sealed







A uncoated 0.5 mm 1,000.0 mm 2,000.0 mm rolled in a box






A uncoated 0.8 mm 1,000.0 mm 2,000.0 mm loose







combitech® system | Sheets, plates and accessoriesSheets | Aluminium

Min. OU: 5 pcs.



A granite-red 0.8 mm 250.0 mm 500.0 mm sealed

B granite-white 0.8 mm 250.0 mm 500.0 mm sealed

C maple 0.8 mm 250.0 mm 500.0 mm sealed

D beech 0.8 mm 250.0 mm 500.0 mm sealed

E white 0.8 mm 250.0 mm 500.0 mm sealed

E white 0.8 mm 300.0 mm 1,000.0 mm sealed

E white 0.8 mm 600.0 mm 1,000.0 mm sealed

EAN/ Itemno.

4001116385247

4001116385742

4001116385346

4001116385445

4001116385049

4001116385025

4001116385032

EAN/ Itemno.

4001116382642

4001116382611

4001116382628

4001116382741

4001116382703

4001116382710

4001116382727

4001116382734

4001116382598

4001116370045

4001116370007

4001116370014

4001116370021

4001116370038

4001116370090

4001116375545

4001116375507

4001116375514

4001116375521

4001116375538

4001116375590

Sheet, aluminium, uncoated

Sheet, aluminium, coated































3.13

ALX

A B C


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium


A silver 0.8 mm 250.0 mm 500.0 mm sealed

A silver 0.8 mm 120.0 mm 1,000.0 mm sealed




B brass 0.8 mm 250.0 mm 500.0 mm sealed

B brass 0.8 mm 120.0 mm 1,000.0 mm sealed




C stainless steel visual effect 0.5 mm 250.0 mm 500.0 mm foil-wrapped, one-sided

C stainless steel visual effect 0.5 mm 120.0 mm 1,000.0 mm foil-wrapped, one-sided




C stainless steel visual effect 0.5 mm 1,000.0 mm 2,000.0 mm rolled in a box

combitech® system | Sheets, plates and accessoriesSheets | Aluminium

EAN/ Itemno.

4001116370144

4001116370106

4001116370113

4001116370120

4001116370137

4001116370243

4001116370205

4001116370212

4001116370229

4001116370236

4001116382048

4001116382000

4001116382017

4001116382024

4001116382031

4001116382093

Sheet, aluminium, anodized


















3.14

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Galvanized steel


A galvanized 0.5 mm 250.0 mm 500.0 mm sealed

A galvanized 0.5 mm 120.0 mm 1,000.0 mm sealed




A galvanized 0.5 mm 1,000.0 mm 2,000.0 mm loose

combitech® system | Sheets, plates and accessoriesSheets | Steel

Min. OU: 5 pcs.

Raw steel


A raw 0.75 mm 250.0 mm 500.0 mm sealed

A raw 0.75 mm 120.0 mm 1,000.0 mm sealed




A raw 0.75 mm 1,000.0 mm 2,000.0 mm sealed

A raw 1.5 mm 250.0 mm 500.0 mm sealed

A raw 1.5 mm 1,000.0 mm 2,100.0 mm loose

EAN/ Itemno.

4001116380549

4001116380501

4001116380518

4001116380525

4001116380532

4001116380594

EAN/ Itemno.

4001116381041

4001116381003

4001116381010

4001116381027

4001116381034

4001116381096

4001116381140

4001116381171

Sheet, steel, galvanized

Sheet, raw steel

















3.15

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Raw steel

Colour Dim. a Dim. b Dim. c Dim. d Thickness Packaging

A raw 1,000.0 mm 2,000.0 mm 60.0 mm 112.0 mm 0.75 mm loose

combitech® system | Sheets, plates and accessoriesSheets | Steel

EAN/ Itemno.

4001116381188

Plain sheet, steel, untreated, processed



3.16

EDL

A

CU

A

MES

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Stainless steel


A stainless steel 0.5 mm 250.0 mm 500.0 mm sealed

A stainless steel 0.5 mm 120.0 mm 1,000.0 mm sealed




combitech® system | Sheets, plates and accessoriesSheets | Stainless steel | Solid copper | Solid brass

Min. OU: 5 pcs.

Solid copper


A copper 0.5 mm 250.0 mm 500.0 mm sealed

A copper 0.5 mm 120.0 mm 1,000.0 mm sealed




Min. OU: 5 pcs.

Solid brass


A brass 0.5 mm 250.0 mm 500.0 mm sealed

A brass 0.5 mm 200.0 mm 1,000.0 mm sealed

EAN/ Itemno.

4001116382543

4001116382505

4001116382512

4001116382529

4001116382536

EAN/ Itemno.

4001116381546

4001116381508

4001116381515

4001116381522

4001116381539

EAN/ Itemno.

4001116380648

4001116380617

Sheet, stainless steel

Sheet, solid brass

Sheet, solid copper
















3.17

ALX

A

ALX

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium


A polished silver 0.7 mm 10.0 mm 40.0 mm 240.0 mm 480.0 mm sealed

A polished silver 0.7 mm 10.0 mm 40.0 mm 120.0 mm 1,000.0 mm sealed




combitech® system | Sheets, plates and accessoriesEmbossed sheets | Aluminium

Min. OU: 5 pcs.

Anodized aluminium







Min. OU: 5 pcs.

Uncoated aluminium

Colour Thickness min. Thickness max. Dim. b Width Long Packaging

A uncoated 1.0 mm 2.0 mm 9.5 mm 250.0 mm 500.0 mm loose

EAN/ Itemno.

4001116379147

4001116379109

4001116379116

4001116379123

4001116379130

EAN/ Itemno.

4001116379642

4001116379604

4001116379611

4001116379628

4001116379635

EAN/ Itemno.

4001116382949

Round studded sheet

Corrugated sheet

Square studded sheet















3.18

ALU

A

ALX

A B


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Uncoated aluminium



A uncoated 0.5 mm 120.0 mm 1,000.0 mm loose






Min. OU: 5 pcs.

Anodized aluminium


A brass 0.5 mm 250.0 mm 500.0 mm loose

A brass 0.5 mm 120.0 mm 1,000.0 mm loose




B copper 0.5 mm 250.0 mm 500.0 mm loose

B copper 0.5 mm 120.0 mm 1,000.0 mm loose




B copper 0.5 mm 1,000.0 mm 2,000.0 mm rolled in a box

EAN/ Itemno.

4001116371042

4001116371004

4001116371011

4001116371028

4001116371035

4001116371097

EAN/ Itemno.

4001116371240

4001116371202

4001116371219

4001116371226

4001116371233

4001116371448

4001116371400

4001116371417

4001116371424

4001116371431

4001116371493

Hammer effect sheet

Hammer effect sheet




















3.19

ALU

A

ALX

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium









Min. OU: 5 pcs.

Anodized aluminium



Min. OU: 5 pcs.

Uncoated aluminium

Colour Thickness min. Thickness max. Width Long Packaging

A uncoated 1.5 mm 2.0 mm 250.0 mm 500.0 mm loose

A uncoated 1.5 mm 2.0 mm 120.0 mm 1,000.0 mm loose




EAN/ Itemno.

4001116370540

4001116370502

4001116370519

4001116370526

4001116370533

4001116370595

EAN/ Itemno.

4001116370748

EAN/ Itemno.

4001116382840

4001116382802

4001116382819

4001116382826

4001116382833

Roughcast sheet

Barleycorn

Roughcast sheet



http://products.alfer.com/Produkte/Eisenwaren/combitech-System-Basis/













3.20

ALU

A

ALX

A B C


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Uncoated aluminium









A uncoated 1.5 mm 2.0 mm 1,000.0 mm 2,000.0 mm loose






A uncoated 2.5 mm 3.5 mm 1,000.0 mm 2,000.0 mm loose


Min. OU: 5 pcs.

Anodized aluminium


A silver 1.5 mm 2.0 mm 600.0 mm 1,000.0 mm shrink-wrapped

B titanium 1.5 mm 2.0 mm 600.0 mm 1,000.0 mm shrink-wrapped

C champagne 1.5 mm 2.0 mm 600.0 mm 1,000.0 mm shrink-wrapped

EAN/ Itemno.

4001116371547

4001116371509

4001116371516

4001116371523

4001116371530

4001116371554

4001116371561

4001116371592

4001116371714

4001116371721

4001116371738

4001116371752

4001116371769

4001116375095

EAN/ Itemno.

4001116364037

4001116364235

4001116364334

Checker plate

Checker plate




















3.21

ALP

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.



A white 1.5 mm 2.0 mm 600.0 mm 1,000.0 mm shrink-wrapped


EAN/ Itemno.

4001116364532

Checker plate



3.22

ALX

A

ALX

A

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Anodized aluminium


A silver 0.7 mm 1.5 mm 20.0 mm 250.0 mm 500.0 mm sealed

A silver 0.7 mm 1.5 mm 20.0 mm 120.0 mm 1,000.0 mm sealed




combitech® system | Sheets, plates and accessoriesPerforated sheets | Aluminium

Min. OU: 5 pcs.

Anodized aluminium







Min. OU: 5 pcs.

Anodized aluminium






EAN/ Itemno.

4001116372643

4001116372605

4001116372612

4001116372629

4001116372636

EAN/ Itemno.

4001116372148

4001116372100

4001116372117

4001116372124

4001116372131

EAN/ Itemno.

4001116373640

4001116373602

4001116373619

4001116373626

Slotted hole sheet

Round hole sheet

Cross hole sheet


















3.23

ALU

A

ALX

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Anodized aluminium



combitech® system | Sheets, plates and accessoriesPerforated sheets | Aluminium


A silver 0.7 mm 1.5 mm 3.0 mm 1,000.0 mm 2,000.0 mm sealed






4001116373633

4001116373695

4001116374142

4001116374104

4001116374111

4001116374128

4001116374135

Min. OU: 5 pcs.

Uncoated aluminium


A uncoated 1.5 mm 4.5 mm 15.0 mm 250.0 mm 500.0 mm sealed

A uncoated 1.5 mm 4.5 mm 15.0 mm 120.0 mm 1,000.0 mm sealed




A uncoated 1.5 mm 4.5 mm 15.0 mm 1,000.0 mm 2,000.0 mm loose

Min. OU: 5 pcs.

Anodized aluminium







EAN/ Itemno.

EAN/ Itemno.

4001116378041

4001116378003

4001116378010

4001116378027

4001116378034

4001116378096

EAN/ Itemno.

4001116373145

4001116373107

4001116373114

4001116373121

4001116373138

Square hole sheet

Round hole sheet





















3.24

ALX

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Anodized aluminium







combitech® system | Sheets, plates and accessoriesPerforated sheets | Aluminium | Steel

Min. OU: 5 pcs.

Galvanized steel


A galvanized 1.5 mm 4.5 mm 15.0 mm 250.0 mm 500.0 mm loose

A galvanized 1.5 mm 4.5 mm 15.0 mm 120.0 mm 1,000.0 mm loose




A galvanized 1.5 mm 4.5 mm 15.0 mm 1,000.0 mm 2,000.0 mm loose

EAN/ Itemno.

4001116380143

4001116380105

4001116380112

4001116380129

4001116380136

EAN/ Itemno.

4001116378546

4001116378508

4001116378515

4001116378522

4001116378539

4001116378591

Square hole sheet

Round hole sheet














3.25

ALU

A

ALX

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium


A uncoated 1.6 mm 10.0 mm 5.0 mm 250.0 mm 500.0 mm sealed





A uncoated 1.6 mm 10.0 mm 5.0 mm 1,000.0 mm 2,000.0 mm rolled in a box

combitech® system | Sheets, plates and accessoriesStretch metal | Aluminium

Min. OU: 5 pcs.

Anodized aluminium


A brass 1.6 mm 10.0 mm 5.0 mm 250.0 mm 500.0 mm sealed

A brass 1.6 mm 10.0 mm 5.0 mm 120.0 mm 1,000.0 mm sealed




A brass 1.6 mm 10.0 mm 5.0 mm 1,000.0 mm 2,000.0 mm rolled in a box

EAN/ Itemno.

4001116374647

4001116374609

4001116374616

4001116374623

4001116374630

4001116374692

EAN/ Itemno.

4001116374746

4001116374708

4001116374715

4001116374722

4001116374739

4001116374791

Stretch metal

Stretch metal















3.26

ALP

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.



A black 1.6 mm 10.0 mm 5.0 mm 250.0 mm 500.0 mm sealed

A black 1.6 mm 10.0 mm 5.0 mm 200.0 mm 1,000.0 mm sealed

A black 1.6 mm 10.0 mm 5.0 mm 600.0 mm 1,000.0 mm sealed

combitech® system | Sheets, plates and accessoriesStretch metal | Aluminium | Steel

Min. OU: 5 pcs.

Raw steel


A raw 1.2 mm 6.0 mm 3.5 mm 250.0 mm 500.0 mm sealed

A raw 1.2 mm 6.0 mm 3.5 mm 120.0 mm 1,000.0 mm sealed














EAN/ Itemno.

4001116375248

4001116375217

4001116375231

EAN/ Itemno.

4001116376047

4001116376009

4001116376016

4001116376023

4001116376030

4001116376542

4001116376504

4001116376511

4001116376528

4001116376535

4001116377044

4001116377006

4001116377013

4001116377020

4001116377037

Stretch metal

Stretch metal





















3.27

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium



combitech® system | Sheets, plates and accessoriesPrismatech


Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Uncoated aluminium





length: 1.00m

EAN/Itemno.

4001116270406

length: 1.00m

EAN/Itemno.

4001116270604

length: 1.00m

EAN/Itemno.

4001116270802

4001116271809

4001116272806

Covering profile, one-sided

Support profile, one-sided

Covering profile, two-sided









3.28

ALU

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s


Min. OU: 5 pcs.

Uncoated aluminium







Min. OU: 5 pcs.

Uncoated aluminium






Min. OU: 5 pcs.

Uncoated aluminium





length: 1.00m

EAN/Itemno.

4001116271007

4001116272004

4001116273001

length: 1.00m

EAN/Itemno.

4001116271601

4001116272608

4001116273605

length: 1.00m

EAN/Itemno.

4001116271403

4001116272400

4001116273407

Support profile, two-sided

Angle profile, one-sided

Hinge profile













3.29

ALU

A

ALG

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium






· Profiles with the unique drill alignment groove · Cover profile pieces mounted in the reverse direction can be used as practical suspension eyes

Min. OU: 5 pcs.



A vibratory finish 19.5 mm 8 pieces SS box

· Screw connection suitable for Prismatech and many other applications · 4 M 3 sleeve nuts with slot 6 × 7.0 / 7.9 / 9.4 mm · 4 M 3 screws with slot 6 × 6.4 / 7.3 / 8.8 mm

Min. OU: 5 pcs.

Uncoated aluminium

Colour Packaging

A uncoated SS box

length: 1.00m

EAN/Itemno.

4001116271205

4001116272202

4001116273209

EAN/ Itemno.

4001116270420

EAN/ Itemno.

4001116304200

Angle profile, two-sided

Prismatech sleeve nut kit, uncoated

Covering profile, one-sided, vibratory finish









3.30

EVA

A

A

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

· For producing vibration-cushioned and splash-proof crates · In combination with the Prismatech support profiles and the corre-sponding cover profiles

Min. OU: 5 pcs.

Plastic (EVA)


A transparent 2.1 mm 9.5 mm 0.9 mm SS box


combitech® system | Sheets, plates and accessoriesPrismatech | Accessories

· Protects against splash water, dampens vibrations and increases the clamping effect of sheets in the Prismatech profile by compensating for the thickness and securing the filling

Min. OU: 5 pcs.

Dim. a PU Packaging

A 8.0 mm 25,00 m SS box

Min. OU: 5 pcs.

Dim. a PU Packaging

A 10.0 mm 5,00 m SS box

length: 2.50m

EAN/Itemno.

4001116304521

4001116304538

length: 25.00m

EAN/Itemno.

4001116306938

length: 5.00m

EAN/Itemno.

4001116306914

Sealing profile

Adhesive cord, strapless, with covering tape

Double adhesive tape with intermediate support








3.31

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium





combitech® system | Sheets, plates and accessoriesMultitube


Min. OU: 5 pcs.

Uncoated aluminium






Min. OU: 5 pcs.

Uncoated aluminium



length: 2.50m

EAN/Itemno.

4001116275012

4001116275210

4001116275418

length: 1.00m

EAN/Itemno.

4001116275005

4001116275203

4001116275401

length: 2.50m

EAN/Itemno.

4001116275616

4001116275814

4001116276019

length: 1.00m

EAN/Itemno.

4001116275609

4001116275807

4001116276002

length: 1.00m

EAN/Itemno.

4001116279508

Round tube

Angle, equal-sided 120°

Square tube

















3.32

ALG

A

ALG

A

ALG

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s


Min. OU: 5 pcs.


Colour Dim. a Dim. b Dim. c For tube PU Packaging

A vibratory finish 35.5 mm 4.0 mm 11.5 mm 19.5 mm 8 pieces SS box



combitech® system | Sheets, plates and accessoriesMultitube | Accessories


Min. OU: 5 pcs.


Colour Dim. a Dim. b Dim. c For tube PU Packaging





Min. OU: 5 pcs.



A vibratory finish 23.5 mm 16 pieces SS box

EAN/ Itemno.

4001116278228

4001116278235

4001116278242

EAN/ Itemno.

4001116278020

4001116278037

4001116278044

EAN/ Itemno.

4001116277429

Corner angle 120° set

Hanging kit

Corner angle 90° set











3.33

STA

A

PVC

A

FER

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· For tensioning Multitube tubes with thin plates, plexiglass, etc. Content: · 4 × M 4 sleeve nuts with 13.5 mm slot · 4 M 4 raised countershrunk head screws with 12.0 / 16.0 / 25.0 mm slot

Min. OU: 5 pcs.

Galvanized steel

Colour PU Packaging

A galvanized 16 pieces SS box


· Effective and weather-resistant prevention against injury · Extremely good bond to sheets without glue or rivets · Extremely durable thanks to metal core, can even be bent around tight curves

Min. OU: 5 pcs.

Plastic (hard PVC)


A black 6.5 mm 9.5 mm SS box

A black 10.5 mm 17.0 mm SS box

Min. OU: 5 pcs.

Hard ferrite with plastic case


A white 30.0 mm 2 pieces SS box

EAN/ Itemno.

4001116304101

length: 2.50m

EAN/Itemno.

4001116304552

4001116304545

EAN/ Itemno.

4001116306839

Mutlitube sleeve nut kit

Hard ferrite magnet with plastic case

Edge protecting profile








3.34

STA

A

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Galvanized steel

Colour Dim. a Dim. b Dim. c PU Packaging

A silver 15.0 mm 15.0 mm 3.4 mm 6 pieces SS box


Min. OU: 5 pcs.

Galvanized steel

Colour Dim. a Dim. b Dim. c PU Packaging

A silver 80.0 mm 15.0 mm 3.4 mm 6 pieces SS box

Min. OU: 5 pcs.

Galvanized steel

Colour Dim. a Dim. b Dim. c Dim. d PU Packaging

A galvanized 16.8 mm 45.0 mm 15.0 mm 0.8 mm 10 pieces clap-pac

EAN/ Itemno.

4001116304606

EAN/ Itemno.

4001116304613

EAN/ Itemno.

4001116381195

Perforated sheet hook, small

Bolt clamp

Perforated sheet hook, large







3.35

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. c min. Dim. c max. Packaging




combitech® system | Sheets, plates and accessoriesChecker plate profiles

Min. OU: 5 pcs.

Uncoated aluminium







Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b Dim. c min. Dim. c max. Packaging




length: 2.50m

EAN/Itemno.

4001116279218

4001116279317

4001116279416

length: 1.00m

EAN/Itemno.

4001116279201

4001116279300

4001116279409

length: 2.50m

EAN/Itemno.

4001116278419

4001116278518

4001116278617

4001116278716

4001116278815

length: 1.00m

EAN/Itemno.

4001116278402

4001116278501

4001116278600

4001116278709

4001116278808

length: 2.50m

EAN/Itemno.

4001116278914

4001116279010

4001116279119

length: 1.00m

EAN/Itemno.

4001116278907

4001116279003

4001116279102

Square U


Angle, equal-sided


























3.36

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Uncoated aluminium




combitech® system | Sheets, plates and accessoriesChecker plate profiles

length: 2.50m

EAN/Itemno.

4001116278464

4001116278563

length: 1.00m

EAN/Itemno.

4001116278457

4001116278556

Angle, inside, equal-sided






3.37

ALU

A

PVC

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· When combined with the sealing profile, you can use this profile as an edge profile

· Item no. 30450 for profile size a = 7.5 mm · Item no. 30451 for profile size a = 11.5 mm

Min. OU: 5 pcs.

Uncoated aluminium




combitech® system | Sheets, plates and accessoriesChecker plate profiles | Accessories



Min. OU: 5 pcs.

Plastic (hard PVC)






Min. OU: 5 pcs.

Uncoated aluminium




length: 2.50m

EAN/Itemno.

4001116254222

4001116254246

length: 1.00m

EAN/Itemno.

4001116254024

4001116254048

length: 2.50m

EAN/Itemno.

4001116214622

4001116214646

length: 1.00m

EAN/Itemno.

4001116214424

4001116214448

length: 2.50m

EAN/Itemno.

4001116259821

4001116259845

length: 1.00m

EAN/Itemno.

4001116259623

4001116259647

Square U


Square U
















3.38

EVA

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

S

heet

s, p

late

s an

d a

cces

sorie

s

Min. OU: 5 pcs.

Plastic (EVA)




combitech® system | Sheets, plates and accessoriesChecker plate profiles | Accessories

Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Thickness min. Thickness max. PU Packaging

A uncoated 23.5 mm 1.5 mm 2.0 mm 4 pieces SS box





Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Thickness min. Thickness max. PU Packaging



length: 2.50m

EAN/Itemno.

4001116304507

4001116304514

EAN/ Itemno.

4001116304002

4001116304019

4001116304026

4001116304033

4001116304040

EAN/ Itemno.

4001116304705

4001116304712

Sealing profile

Gusset

Case corner













combitech® system | logika®


4.03


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Range overview

Keep things neat and tidy

Steel or aluminium profiles

Drilling is a thing of the past! The consistently perforated logika®

system profiles save you time and reduce your amount of work. All

four profile sizes come with even hole spacing of 25 mm or 12.5 mm

and can therefore be precisely joined. This provides optimal guid-

ance when cutting profiles to length or screwing them together and

also ensures that your finished structures are completely straight

and stable. Furthermore, thanks to the universal hole spacing, all

four available profile sizes can be combined with one another. A

further advantage of logika®: thanks to the hole spacing, all of the

profiles can be optimally combined with standard furniture systems.

logika® is a particularly ideal partner for customised storage solu-

tions: whether for staggered shelf units under stairs or sloping roofs

or sophisticated corner solutions, with logika® every last inch of

space can be transformed into a practical storage space. This en-

ables you to make the most of any situation no matter how much

space is available. What’s more, thanks to their modern appear-

ance, logika® system profiles also look simply great, even for de-

signer furniture.

logika® profile accessories

By choosing the appropriate screw set from the logika® accessories

range, you can perfectly screw together all profiles. Plastic shelf unit

feet can be easily slotted into the profiles to protect the floor against

unsightly scratches. The universal deburrer enables you to effort-

lessly remove all sharp cutting edges left by saws.

Tip:

All logika® profiles are based on the standard dimensions of

our combitech® system. This means that you can also use all

combitech® standard accessories for your designs. End caps,

gussets, connection sleeves etc. – benefit from the broad range of

combitech® accessories and combine them to your heart’s desire.

All products and full information can be found in our hardware cat-

alogue.

4.04

PA

ALU

ALX

STA

STA


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| logika

®

System profiles | Aluminium 4.05 – 4.08

System profiles | Steel, galvanized and coated 4.09 – 4.11


· Angle, equal-sided, slotted· Angle, unequal-sided, slotted· Flat bar, slotted· Square tube, slotted· T-profile, slotted· U-profile, slotted

· Angle, equal-sided, slotted· Angle, unequal-sided, slotted· Flat bar, slotted· U-profile, slotted

· Cylinder head screw set· Oval-headed screw set· Shelf unit foot· Universal deburrer


Range overview

4.05

ALU

A

ALX

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· The logically perforated profile range

Min. OU: 5 pcs.

Uncoated aluminium





System profiles | Aluminium


Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 2.0 mm loose



Min. OU: 5 pcs.

Uncoated aluminium




length: 1.00m

EAN/Itemno.

4001116230165

4001116230066

length: 2.00m

EAN/Itemno.

4001116230660

4001116230561

length: 2.50m

EAN/Itemno.

4001116231162

4001116231063

length: 1.00m

EAN/Itemno.

4001116231636

4001116231537

length: 2.50m

EAN/Itemno.

4001116232633

4001116232534

length: 1.00m

EAN/Itemno.

4001116230134

4001116230035

length: 2.00m

EAN/Itemno.

4001116230639

4001116230530

length: 2.50m

EAN/Itemno.

4001116231131

4001116231032

Flat bar, slotted

Square tube, slotted

Flat bar, slotted

http://qr.alfer.com/agos3111000



















4.06

ALX

A

ALU

A

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| logika

®


Min. OU: 5 pcs.

Anodized aluminium







Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Anodized aluminium



length: 1.00m

EAN/Itemno.

4001116231544

length: 2.50m

EAN/Itemno.

4001116232541

length: 1.00m

EAN/Itemno.

4001116230042

length: 2.00m

EAN/Itemno.

4001116230547

length: 2.50m

EAN/Itemno.

4001116231049

length: 1.00m

EAN/Itemno.

4001116231667

4001116231568

length: 2.50m

EAN/Itemno.

4001116232664

4001116232565

Square tube, slotted

U-profile, slotted

U-profile, slotted













4.07

ALU

A

ALX

A B

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Uncoated aluminium









Min. OU: 5 pcs.

Anodized aluminium






B titanium 7.5 mm 1.0 mm loose

B titanium 15.5 mm 1.5 mm loose


Min. OU: 5 pcs.

Uncoated aluminium




length: 1.00m

EAN/Itemno.

4001116230127

4001116230028

length: 2.00m

EAN/Itemno.

4001116230622

4001116230523

length: 2.50m

EAN/Itemno.

4001116231124

4001116231025

length: 1.00m

EAN/Itemno.

4001116231810

4001116231711

4001116231612

4001116231513

4001116233319

4001116233210

length: 2.00m

EAN/Itemno.

4001116232114

4001116232015

length: 2.50m

EAN/Itemno.

4001116232619

4001116232510

length: 1.00m

EAN/Itemno.

4001116230318

4001116230219

4001116230110

4001116230011

length: 2.00m

EAN/Itemno.

4001116230615

4001116230516

length: 2.50m

EAN/Itemno.

4001116231117

4001116231018

Angle, equal-sided, slotted

Angle, unequal-sided, slotted





























4.08

ALX

A

ALU

A

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| logika

®


Min. OU: 5 pcs.

Anodized aluminium


A silver 23.5 mm 43.5 mm 1.5 mm loose





Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Anodized aluminium



length: 1.00m

EAN/Itemno.

4001116231551

length: 2.50m

EAN/Itemno.

4001116232558

length: 1.00m

EAN/Itemno.

4001116230059

length: 2.00m

EAN/Itemno.

4001116230554

length: 2.50m

EAN/Itemno.

4001116231056

length: 1.00m

EAN/Itemno.

4001116231629

4001116231520

length: 2.50m

EAN/Itemno.

4001116232626

4001116232527


T-profile, slotted

T-profile, slotted













4.09

STA

A

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Galvanized steel


A galvanized 23.5 mm 1.2 mm loose



System profiles | Steel, galvanized and coated


Min. OU: 5 pcs.

Galvanized steel, coated





Min. OU: 5 pcs.

Galvanized steel



length: 1.00m

EAN/Itemno.

4001116390043

length: 2.00m

EAN/Itemno.

4001116390548

length: 2.50m

EAN/Itemno.

4001116391040

length: 1.00m

EAN/Itemno.

4001116391637

4001116391538

length: 2.00m

EAN/Itemno.

4001116392139

4001116392030

length: 2.50m

EAN/Itemno.

4001116392634

4001116392535

length: 1.00m

EAN/Itemno.

4001116390135

4001116390036

length: 2.00m

EAN/Itemno.

4001116390630

4001116390531

length: 2.50m

EAN/Itemno.

4001116391132

4001116391033

Flat bar, slotted

U-profile, slotted

Flat bar, slotted



















4.10

STA

A

STA

A

STA

A B


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| logika

®


Min. OU: 5 pcs.







Min. OU: 5 pcs.

Galvanized steel







Min. OU: 5 pcs.







B black 35.5 mm 1.5 mm loose

length: 1.00m

EAN/Itemno.

4001116391811

4001116391712

4001116391613

4001116391514

4001116393013

length: 2.00m

EAN/Itemno.

4001116392115

4001116392016

4001116393518

length: 2.50m

EAN/Itemno.

4001116392610

4001116392511

length: 1.00m

EAN/Itemno.

4001116390319

4001116390210

4001116390111

4001116390012

length: 2.00m

EAN/Itemno.

4001116390616

4001116390517

length: 2.50m

EAN/Itemno.

4001116391118

4001116391019

length: 1.00m

EAN/Itemno.

4001116391545

length: 2.00m

EAN/Itemno.

4001116392047

length: 2.50m

EAN/Itemno.

4001116392542

U-profile, slotted



























4.11

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Galvanized steel


A galvanized 23.5 mm 43.5 mm 1.2 mm loose





Min. OU: 5 pcs.





length: 1.00m

EAN/Itemno.

4001116391620

4001116391521

length: 2.00m

EAN/Itemno.

4001116392122

4001116392023

length: 2.50m

EAN/Itemno.

4001116392627

4001116392528

length: 1.00m

EAN/Itemno.

4001116390128

4001116390029

length: 2.00m

EAN/Itemno.

4001116390623

4001116390524

length: 2.50m

EAN/Itemno.

4001116391125

4001116391026

















4.12

STA

A

STA

A

PA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| logika

®

Min. OU: 5 pcs.

Galvanized steel

Colour Screw size Length PU Packaging

A galvanized M 5 12.0 mm 20 pieces each, SS box







System accessories

Min. OU: 5 pcs.

Galvanized steel

Colour Screw size Length PU Packaging



· For all even-branched combitech® system profile brackets with dimension a = 23.5 mm or 35.5 mm

Min. OU: 5 pcs.

Plastic (PA)




EAN/ Itemno.

4001116394904

4001116394911

EAN/ Itemno.

4001116394805

4001116394812

EAN/ Itemno.

4001116394829

4001116394836

4001116394843

4001116394850

4001116394867

4001116394874

Oval-headed screw set

Shelf unit foot

Cylinder head screw set














4.13

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Colour Packaging

A blue SS box


System accessories

EAN/ Itemno.

4001116286612

Universal deburrer



4.14


Hard

ware catalogue | 97002 | 01 2017 | 71708

combitech

®

sys

tem

| logika

®


Profiles for DIY and professional purposes


5.03


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Profiles for DIY and professional purposesRange overview

Needs-oriented solutions: Standard profiles made from aluminium, brass and plastic

In order to provide suitable products for all imaginable projects,

alfer® offers you an impressive range of profiles for DIY and pro-

fessional purposes in various different materials. These materials

have different mechanical properties, different surfaces, weights

and costs. We provide the options – the choice is yours.

Aluminium

Aluminium is an integral part of our modern lives and a material

that we encounter almost everywhere. And this is no wonder: the

versatile light alloy has an impressively low weight yet high material

strength. It is rust-proof and 100% recyclable. Furthermore, it can

be easily worked. Make use of the benefits and versatility offered by

this fascinating material – with the unique alfer® aluminium range.

Uncoated aluminium

Our standard profiles made from uncoated aluminium have a thick-

er profile cross-section than those made from anodised aluminium.

They are also larger on the whole. Over time, the surfaces become

mottled. This is a natural process, which does not affect the material

strength or stability.

Anodised aluminium

Our anodised aluminium standard profiles come with a refined and

protective finish. This prevents the material from tarnishing as well

as from changing as a result of damp or other environmental influ-

ences. The anodised profiles are available in silver, brass and, to a

certain extent, bronze, as well as with a chrome or stainless steel

look.

Solid brass

Our solid brass standard profiles are ideal for withstanding high me-

chanical loads. They are furthermore insensitive to almost all chem-

icals. Contact with the air causes a natural oxide layer (patina) to

form. This can be easily removed with polish if desired.

5.04


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es


Plastic (hard PVC)

Our plastic standard profiles can be an attractive and lower cost al-

ternative to our metal ones. They are suitable for numerous different

uses subject to normal mechanical loads. The finish is not affect-

ed by moisture and the PVC profiles are also astonishingly resist-

ant against many chemicals. The use of abrasive cleaning agents

should, however, be avoided. Tip: please note that we also offer

self-adhesive plastic profiles, which are particularly easy to use.

Simple handling: Self-adhesive standard profiles made from

aluminium and plastic

Say goodbye to drilling and screwing! Discover new heights of sim-

plicity and experience our high-quality self-adhesive profiles made

from aluminium or plastic. The profiles are extremely easy to use

and suitable for the broadest range of uses where they are subject

to low to medium mechanical loads. And because the work almost

does itself, you have more time to enjoy the perfect results. Sound

good? Sticks brilliantly!

Elegantly edged: Aluminium and plastic clamping profiles

Whether for building shelves, racks, partition walls, frames or as a

form of edge protection – our universal clamping profiles from the

clampline and clampsoft product series make it possible to cleanly

and perfectly frame sheets of wood, plywood or glass. clampline

profiles are made from anodised aluminium and have an impres-

sively refined look. The practical clampsoft profiles are made from

plastic and have pleasantly rounded edges. In other words: alfer®

universal clamping profiles are as diverse as your home!

5.05

ALP

ALU

ALX

MES

PVC

PET

PET

ALX

ALP

PVC


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Standard profiles | Anodized and powder-coated aluminium 5.13 – 5.21

Standard profiles | Brass, solid 5.22 – 5.23

Standard profiles | Plastic 5.24 – 5.32

Standard profiles | Aluminium and plastic, self-adhesive 5.33 – 5.35

Standard profiles | Aluminium, uncoated 5.07 – 5.12

· Angle, equal-sided· Angle, unequal-sided· Edge protecting profile· Edge protecting profile, round· Flat bar· Frame edging profile· Guide rail profile, assembly at the top· Guide rail profile, assembly below· H-profile· Handle profile

· Hinge profile for Ø 6.1 mm· Round bar· Round tube· Square bar· Square tube· T-profile· U-profile

· Angle, equal-sided· Flat bar· Round bar· Round tube· Square bar

· Angle, equal-sided· Angle, unequal-sided· Corner bar· Edge profile, one-sided· Edge profile, two-sided· Edge protecting profile, round· Flat bar· Frame profile· Guide rail profile, assembly at the top· Guide rail profile, assembly below

· Quarter circle corner bar· U-profile

· Bracket, equal-sided, self-adhesive· Combi-bracket, equal-sided, self-adhesive· Corner bar, self-adhesive· Quarter circle corner bar, self-adhesive

· Angle, equal-sided· Angle, unequal-sided· Edge protecting profile· Flat bar· Guide rail profile, assembly at the top· Guide rail profile, assembly below· Handle profile· Ladder step profile· Rectangular tube· Round bar

· Round tube· Square tube· T-profile· U-profile


5.06

ALX

PVC

PA


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

clampline clamping profiles | Aluminium 5.36 – 5.38

clampsoft clamping profiles | Plastic 5.39 – 5.41

· clampline angle profile· clampline corner profile· clampline H-profile· clampline hinge profile· clampline T-profile· clampline U-profile

· clampsoft angle profile· clampsoft corner for angle profile· clampsoft corner for corner profile· clampsoft corner for U-profile· clampsoft corner profile· clampsoft U-profile


5.07

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium









Profiles for DIY and professional purposesStandard profiles | Aluminium, uncoated

Min. OU: 5 pcs.

Uncoated aluminium














length: 1.00m

EAN/Itemno.

4001116000409

4001116000416

4001116002427

4001116000423

4001116002434

4001116002441

4001116000454

length: 2.00m

EAN/Itemno.

4001116040429

4001116040436

4001116040443

4001116040450

4001116040467

4001116040474

4001116040481

length: 2.50m

EAN/Itemno.

4001116042409

4001116042416

4001116042423

4001116042430

4001116042447

4001116042454

4001116042461

4001116042478

4001116042485

length: 1.00m

EAN/Itemno.

4001116000133

4001116000102

4001116000126

4001116000140

length: 2.00m

EAN/Itemno.

4001116040108

4001116040122

4001116040146

4001116040153

4001116040160

4001116040177

length: 2.50m

EAN/Itemno.

4001116042133

4001116042102

4001116042126

4001116042140

4001116042157

4001116042164

4001116042171

Flat bar

Angle, equal-sided











































5.08

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Uncoated aluminium













Min. OU: 5 pcs.

Uncoated aluminium













length: 1.00m

EAN/Itemno.

4001116000652

4001116000607

4001116000614

4001116000621

4001116000638

4001116000645

4001116000669

4001116000683

4001116000676

length: 2.00m

EAN/Itemno.

4001116040665

4001116040689

4001116040672

4001116041358

4001116040696

length: 2.50m

EAN/Itemno.

4001116042669

4001116042683

4001116042676

4001116043352

4001116042690

length: 1.00m

EAN/Itemno.

4001116002502

4001116002519

4001116000522

4001116000546

4001116000539

4001116000553

length: 2.00m

EAN/Itemno.

4001116040511

4001116040528

4001116040542

4001116040535

4001116040559

4001116040566

length: 2.50m

EAN/Itemno.

4001116042508

4001116042515

4001116042522

4001116042546

4001116042539

4001116042553

4001116042560


U-profile









































5.09

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium

















Min. OU: 5 pcs.

Uncoated aluminium







length: 1.00m

EAN/Itemno.

4001116000331

4001116000348

4001116000300

4001116000317

4001116000324

length: 2.00m

EAN/Itemno.

4001116040313

4001116040320

length: 2.50m

EAN/Itemno.

4001116042317

4001116042324

length: 1.00m

EAN/Itemno.

4001116000201

4001116000218

4001116000225

4001116000232

4001116000249

4001116000263

4001116000256

4001116000270

length: 2.00m

EAN/Itemno.

4001116040269

4001116040252

4001116040276

4001116040283

4001116040290

length: 2.50m

EAN/Itemno.

4001116042218

4001116042225

4001116042232

4001116042263

4001116042256

4001116042270

4001116042287

4001116042294

Round tube

Round bar

































5.10

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Uncoated aluminium













Min. OU: 5 pcs.

Uncoated aluminium






length: 1.00m

EAN/Itemno.

4001116004285

length: 2.00m

EAN/Itemno.

4001116044328

4001116044281

4001116044335

length: 2.50m

EAN/Itemno.

4001116043321

4001116043284

4001116043338

length: 1.00m

EAN/Itemno.

4001116000720

4001116000737

4001116002700

4001116000706

4001116000713

4001116000751

length: 2.00m

EAN/Itemno.

4001116040702

4001116040719

4001116040740

4001116040757

4001116040764

length: 2.50m

EAN/Itemno.

4001116042720

4001116042737

4001116042706

4001116042713

4001116042744

4001116042751

4001116042768

Square tube

Rectangular tube




























5.11

ALU

A

ALU

A

ALU

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Uncoated aluminium




Min. OU: 5 pcs.

Uncoated aluminium



Min. OU: 5 pcs.

Uncoated aluminium






length: 1.00m

EAN/Itemno.

4001116000904

4001116000911

4001116000928

length: 2.00m

EAN/Itemno.

4001116040917

4001116040924

4001116040931

length: 2.50m

EAN/Itemno.

4001116042911

4001116042935

length: 1.00m

EAN/Itemno.

4001116001390

length: 2.00m

EAN/Itemno.

4001116041396

length: 2.50m

EAN/Itemno.

4001116043390

length: 1.00m

EAN/Itemno.

4001116001406

length: 2.00m

EAN/Itemno.

4001116041402

length: 2.50m

EAN/Itemno.

4001116043406

Guide rail profile, assembly below

T-profile

Guide rail profile, assembly at the top


















5.12

ALU

A

ALU

A

ALU

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

· Also suitable for furniture · The profile can be screwed or glued on · The chamfered edges ensure a smooth and uniform transition

Min. OU: 5 pcs.

Uncoated aluminium





Min. OU: 5 pcs.

Uncoated aluminium

Colour Dim. a Dim. b Dim. c Thickness Packaging


Min. OU: 5 pcs.

Uncoated aluminium



length: 1.00m

EAN/Itemno.

4001116004315

length: 2.00m

EAN/Itemno.

4001116044311

length: 2.50m

EAN/Itemno.

4001116043314

length: 1.00m

EAN/Itemno.

4001116004056

length: 1.00m

EAN/Itemno.

4001116004025

4001116004018


Ladder step profile

Handle profile










5.13

ALX

A B C D

ALX

A B C D


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium










B brass 15.0 mm 2.0 mm loose



C chrome look 15.0 mm 2.0 mm loose




D stainless steel visual effect 15.0 mm 2.0 mm loose




Profiles for DIY and professional purposesStandard profiles | Anodized and powder-coated aluminium

Min. OU: 5 pcs.

Anodized aluminium











length: 1.00m

EAN/Itemno.

4001116010408

4001116010415

4001116015427

4001116010422

4001116015434

4001116010439

4001116015441

4001116010446

4001116010453

length: 2.00m

EAN/Itemno.

4001116050404

4001116050411

4001116050428

4001116050435

4001116050442

4001116050459

length: 2.50m

EAN/Itemno.

4001116082405

4001116082412

4001116082429

4001116082436

4001116082443

4001116082450

length: 1.00m

EAN/Itemno.

4001116010132

4001116010101

4001116010118

4001116010125

4001116010149

4001116010156

4001116010163

4001116010170

4001116020131

4001116020100

4001116020124

4001116012136

4001116012105

4001116012129

4001116012143

4001116022135

4001116022104

4001116022128

4001116022142

length: 2.00m

EAN/Itemno.

4001116050138

4001116050107

4001116050114

4001116050121

4001116050145

4001116050152

4001116050169

4001116050176

length: 2.50m

EAN/Itemno.

4001116082139

4001116082108

4001116082115

4001116082122

4001116082146

4001116082153

4001116082160

4001116082177

4001116052132

4001116052101

4001116052125

4001116052149

4001116062131

4001116062100

4001116062124

4001116062148

Flat bar

Angle, equal-sided



































































5.14

ALX

A B C


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Anodized aluminium





B brass 10.0 mm 10.0 mm 1.0 mm loose






C chrome look 10.0 mm 10.0 mm 1.0 mm loose








D stainless steel visual effect 10.0 mm 10.0 mm 1.0 mm loose









4001116085406

4001116085413

4001116085420

4001116085437

4001116052408

4001116052415

4001116052422

4001116052439

4001116052446

4001116062407

4001116164705

4001116062414

4001116062421

4001116062438

4001116062445

4001116050466

4001116060403

4001116060410

4001116060427

4001116060434

4001116010460

4001116020407

4001116020414

4001116020421

4001116020438

4001116012402

4001116012419

4001116012426

4001116012433

4001116012440

4001116022401

4001116022418

4001116022425

4001116022432

4001116022449

Min. OU: 5 pcs.

Anodized aluminium











B chrome look 20.0 mm 10.0 mm 1.0 mm loose


C stainless steel visual effect 20.0 mm 10.0 mm 1.0 mm loose


length: 1.00m

EAN/Itemno.

4001116015502

4001116010507

4001116015519

4001116010514

4001116010521

4001116010545

4001116010538

4001116010552

4001116010569

4001116012501

4001116012518

4001116022500

4001116022517

length: 2.00m

EAN/Itemno.

4001116050503

4001116050510

4001116050527

4001116050541

4001116050534

4001116050558

4001116050565

length: 2.50m

EAN/Itemno.

4001116082504

4001116082511

4001116082528

4001116082542

4001116082535

4001116082559

4001116082566

4001116052507

4001116052514

4001116062506

4001116062513

length: 2.50m

EAN/Itemno.

length: 2.00m

EAN/Itemno.

length: 1.00m

EAN/Itemno.





































































5.15

ALX

A

ALX

A

ALX

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· Also suitable for furniture · The profile can be screwed or glued on · The chamfered edges ensure a smooth and uniform transition

Min. OU: 5 pcs.

Anodized aluminium





Min. OU: 5 pcs.

Anodized aluminium








Min. OU: 5 pcs.

Anodized aluminium





length: 1.00m

EAN/Itemno.

4001116010651

length: 2.00m

EAN/Itemno.

4001116050657

4001116050664

4001116050671

length: 2.50m

EAN/Itemno.

4001116082665

4001116082672

length: 1.00m

EAN/Itemno.

4001116010606

4001116010613

4001116010620

4001116010637

4001116010644

length: 2.00m

EAN/Itemno.

4001116050602

4001116050619

4001116050626

4001116050633

4001116050640

length: 2.50m

EAN/Itemno.

4001116082658

4001116082603

4001116082610

4001116082627

4001116082634

4001116082641

length: 1.00m

EAN/Itemno.

4001116014024

4001116014017

length: 2.00m

EAN/Itemno.

4001116054020

4001116054013

length: 2.50m

EAN/Itemno.

4001116083525

4001116083518


U-profile

U-profile
































5.16

ALX

A B C D

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Anodized aluminium






















Min. OU: 5 pcs.

Anodized aluminium


A silver 4.0 mm loose





length: 1.00m

EAN/Itemno.

4001116010330

4001116010347

4001116010309

4001116010316

4001116010323

length: 2.00m

EAN/Itemno.

4001116050336

4001116050343

4001116050305

4001116050312

4001116050329

length: 2.50m

EAN/Itemno.

4001116082337

4001116082344

4001116082306

4001116082313

4001116082320

length: 1.00m

EAN/Itemno.

4001116010200

4001116010217

4001116010224

4001116010231

4001116010248

4001116010262

4001116010255

4001116020209

4001116020216

4001116020223

4001116020230

4001116020247

4001116012211

4001116012228

4001116012235

4001116022210

4001116022227

4001116022234

length: 2.00m

EAN/Itemno.

4001116050206

4001116050213

4001116050220

4001116050237

4001116050244

4001116050268

4001116050251

4001116050275

length: 2.50m

EAN/Itemno.

4001116082207

4001116082214

4001116082221

4001116082238

4001116082245

4001116082269

4001116082252

4001116082276

4001116052217

4001116052224

4001116052231

4001116062216

4001116062223

4001116062230

Round tube

Round bar


























































5.17

ALX

A

ALX

A B C


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium




Min. OU: 5 pcs.

Anodized aluminium














length: 1.00m

EAN/Itemno.

4001116010729

4001116010736

4001116015700

4001116010705

4001116010712

4001116010743

4001116012723

4001116012730

4001116012709

4001116022722

4001116022739

4001116022708

length: 2.00m

EAN/Itemno.

4001116050725

4001116050732

4001116050701

4001116050718

4001116050749

length: 2.50m

EAN/Itemno.

4001116082726

4001116082733

4001116082702

4001116082719

4001116082740

4001116052729

4001116052736

4001116052705

4001116062728

4001116062735

4001116062704

length: 1.00m

EAN/Itemno.

4001116011108

length: 2.00m

EAN/Itemno.

4001116051104

length: 2.50m

EAN/Itemno.

4001116083105

Hinge profile for Ø 6.1 mm

Square tube


































5.18

ALX

A

ALX

A

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Anodized aluminium






Min. OU: 5 pcs.

Anodized aluminium



Min. OU: 5 pcs.

Anodized aluminium



length: 1.00m

EAN/Itemno.

4001116011399

length: 2.00m

EAN/Itemno.

4001116051395

length: 2.50m

EAN/Itemno.

4001116083396

length: 1.00m

EAN/Itemno.

4001116011405

length: 2.00m

EAN/Itemno.

4001116051401

length: 2.50m

EAN/Itemno.

4001116083402

length: 1.00m

EAN/Itemno.

4001116010804

4001116010811

4001116010828

length: 2.00m

EAN/Itemno.

4001116050800

4001116050817

4001116050824

length: 2.50m

EAN/Itemno.

4001116082801

4001116082818

4001116082825

Square bar





















5.19

ALX

A

ALX

A

ALX

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium






Min. OU: 5 pcs.

Anodized aluminium







Min. OU: 5 pcs.

Anodized aluminium


A silver 20.0 mm 22.0 mm 15.0 mm 1.5 mm loose

length: 1.00m

EAN/Itemno.

4001116014031

length: 2.00m

EAN/Itemno.

4001116054037

length: 2.50m

EAN/Itemno.

4001116083532

length: 1.00m

EAN/Itemno.

4001116011009

4001116011016

4001116011023

4001116011030

4001116011047

length: 2.00m

EAN/Itemno.

4001116051005

4001116051012

4001116051029

4001116051036

4001116051043

length: 2.50m

EAN/Itemno.

4001116083006

4001116083013

4001116083020

4001116083037

4001116083044

length: 1.00m

EAN/Itemno.

4001116010903

4001116010910

length: 2.00m

EAN/Itemno.

4001116050909

4001116050916

4001116050923

length: 2.50m

EAN/Itemno.

4001116082900

4001116082917

4001116082924

T-profile

Handle profile

H-profile






























5.20

ALX

A

ALX

A

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Anodized aluminium

Colour Dim. a Dim. b Thickness Packaging



Min. OU: 5 pcs.

Anodized aluminium



Min. OU: 5 pcs.

Anodized aluminium



length: 1.00m

EAN/Itemno.

4001116014109

length: 2.00m

EAN/Itemno.

4001116054105

length: 2.50m

EAN/Itemno.

4001116083600

length: 1.00m

EAN/Itemno.

4001116014055

length: 2.00m

EAN/Itemno.

4001116054051

length: 2.50m

EAN/Itemno.

4001116083556

length: 1.00m

EAN/Itemno.

4001116014048

length: 2.00m

EAN/Itemno.

4001116054044

length: 2.50m

EAN/Itemno.

4001116083549

Handle profile

Handle profile

Handle profile













5.21

ALX

A B

ALX

A

ALP

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium






B chrome look 16.0 mm 5.8 mm 1.0 mm shrink-wrapped





Min. OU: 5 pcs.

Anodized aluminium



Min. OU: 5 pcs.




length: 1.00m

EAN/Itemno.

4001116031410

length: 2.00m

EAN/Itemno.

4001116071416

length: 1.00m

EAN/Itemno.

4001116011412

length: 2.00m

EAN/Itemno.

4001116051418

length: 2.50m

EAN/Itemno.

4001116083419

length: 1.00m

EAN/Itemno.

4001116011153

4001116011160

4001116011177

4001116011184

4001116013157

4001116013164

4001116013171

4001116013188

length: 2.00m

EAN/Itemno.

4001116051159

4001116051166

4001116051173

4001116051180

length: 2.50m

EAN/Itemno.

4001116053153

4001116053160

4001116053177

4001116053184

Edge protecting profile, round

Frame edging profile

Frame edging profile

























5.22

MES

A

MES

A

MES

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Solid brass


A brass 7.0 mm 2.5 mm loose




Profiles for DIY and professional purposesStandard profiles | Brass, solid

Min. OU: 5 pcs.

Solid brass






Min. OU: 5 pcs.

Solid brass







length: 1.00m

EAN/Itemno.

4001116202209

4001116202216

4001116202223

4001116202230

4001116202247

length: 1.00m

EAN/Itemno.

4001116202407

4001116202414

4001116202421

4001116202438

length: 1.00m

EAN/Itemno.

4001116202100

4001116202117

4001116202124

4001116202131

Flat bar

Round tube

Angle, equal-sided

















5.23

MES

A

MES

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Solid brass


A brass 1.3 mm loose







Profiles for DIY and professional purposesStandard profiles | Brass, solid

Min. OU: 5 pcs.

Solid brass





length: 1.00m

EAN/Itemno.

4001116202803

4001116202810

4001116202827

length: 1.00m

EAN/Itemno.

4001116202339

4001116202360

4001116202346

4001116202308

4001116202353

4001116202315

4001116202322

Round bar

Square bar













5.24

PVC

A B C D

PET

A

PVC

A B C ED

F G H


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Plastic (hard PVC)






B black 30.0 mm 3.0 mm loose

C grey 30.0 mm 3.0 mm loose

D oak 30.0 mm 3.0 mm loose

Profiles for DIY and professional purposesStandard profiles | Plastic

Min. OU: 5 pcs.

Plastic (PET)






Min. OU: 5 pcs.

Plastic (hard PVC), hot-embossed


A polished white 20.0 mm 20.0 mm 1.5 mm loose

B polished grey 20.0 mm 20.0 mm 1.5 mm loose

C polished black 20.0 mm 20.0 mm 1.5 mm loose

length: 1.00m

EAN/Itemno.

4001116127243

4001116127304

4001116127267

length: 2.50m

EAN/Itemno.

4001116167249

4001116167300

4001116167263

length: 1.00m

EAN/Itemno.

4001116129896

4001116129988

4001116129971

4001116129919

length: 2.50m

EAN/Itemno.

4001116169892

4001116169984

4001116169977

4001116169915

length: 2.50m

EAN/Itemno.

4001116164576

4001116164583

4001116164590

4001116164606

4001116164675

4001116164682

4001116164699

Flat bar

Angle, equal-sided

Angle, equal-sided

























5.25

PVC

A B C ED

F G H


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708





D silver 20.0 mm 20.0 mm 1.5 mm loose

E polished champagne 20.0 mm 20.0 mm 1.5 mm loose

F titanium 20.0 mm 20.0 mm 1.5 mm loose

G stainless steel visual effect 20.0 mm 20.0 mm 1.5 mm loose

H chrome look 20.0 mm 20.0 mm 1.5 mm loose

4001116167393

4001116167317

4001116167409

4001116167157

4001116167386

4001116127397

4001116127311

4001116127403

4001116127151

4001116127380

Min. OU: 5 pcs.

Plastic (hard PVC)



B white 10.0 mm 10.0 mm 1.0 mm loose











C grey 15.0 mm 15.0 mm 1.0 mm loose



D black 10.0 mm 10.0 mm 1.0 mm loose






E beech 20.0 mm 20.0 mm 1.0 mm loose

E beech 30.0 mm 30.0 mm 1.1 mm loose

F oak 20.0 mm 20.0 mm 1.0 mm loose

G wenge 20.0 mm 20.0 mm 1.0 mm loose


H wood white 30.0 mm 30.0 mm 1.1 mm loose

length: 1.00m

EAN/Itemno.

4001116121401

4001116121418

4001116121463

4001116121425

4001116121470

4001116121432

4001116121753

4001116121760

4001116121777

4001116127274

4001116111402

4001116111419

4001116111464

4001116111426

4001116111471

4001116111433

length: 2.00m

EAN/Itemno.

4001116169991

4001116161407

4001116161414

4001116161469

4001116161421

4001116161476

4001116161438

4001116161759

4001116161766

4001116161773

4001116151408

4001116151415

4001116151460

4001116151422

4001116151439

length: 2.50m

EAN/Itemno.

4001116164804

4001116164811

4001116165733

4001116164828

4001116165740

4001116164835

4001116165757

4001116165764

4001116165771

4001116164507

4001116164569

4001116164651

4001116167270

4001116164668

4001116151583

4001116151590

4001116151477

4001116167171

4001116167188

4001116167164

4001116167324

4001116167201

4001116167195

length: 2.50m

EAN/Itemno.

length: 1.00m

EAN/Itemno.

Angle, equal-sided


































































5.26

PET

A

PVC

A B


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Plastic (PET)





Min. OU: 5 pcs.

Plastic (hard PVC)










B black 20.0 mm 10.0 mm 1.5 mm loose




length: 1.00m

EAN/Itemno.

4001116121548

4001116121500

4001116121555

4001116121517

4001116121562

4001116121524

4001116121579

4001116121531

4001116111501

4001116111518

4001116111525

4001116111532

length: 2.00m

EAN/Itemno.

4001116161544

4001116161506

4001116161551

4001116161513

4001116161568

4001116161520

4001116161575

4001116161537

4001116151507

4001116151514

4001116151521

4001116151538

length: 2.50m

EAN/Itemno.

4001116164842

4001116164859

4001116164866

4001116164873

length: 1.00m

EAN/Itemno.

4001116129964

4001116129957

length: 2.50m

EAN/Itemno.

4001116169960

4001116169953





































5.27

PVC

A B

PVC

A B C D


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (hard PVC)










B brown 10.0 mm 13.0 mm 1.2 mm loose









Min. OU: 5 pcs.

Plastic (hard PVC)


A light oak 10.0 mm 13.0 mm 1.2 mm loose








B rustic oak 10.0 mm 13.0 mm 1.2 mm loose




length: 1.00m

EAN/Itemno.

4001116123009

4001116123108

4001116123207

4001116123306

4001116123405

4001116123504

4001116123603

4001116123702

4001116123016

4001116123115

4001116123214

4001116123313

length: 2.00m

EAN/Itemno.

4001116163005

4001116163104

4001116163203

4001116163302

4001116163401

4001116163500

4001116163609

4001116163708

4001116163012

4001116163111

4001116163210

4001116163319

length: 1.00m

EAN/Itemno.

4001116123054

4001116123153

4001116123252

4001116123351

4001116123450

4001116123559

4001116123658

4001116123757

4001116123047

4001116123146

4001116123245

4001116123344

4001116123443

4001116123542

4001116123641

4001116123740

length: 2.00m

EAN/Itemno.

4001116163050

4001116163159

4001116163258

4001116163357

4001116163456

4001116163555

4001116163654

4001116163753

4001116163043

4001116163142

4001116163241

4001116163340

4001116163449

4001116163548

4001116163647

4001116163746





























































5.28

PVC

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Plastic (hard PVC)








C pine 10.0 mm 13.0 mm 1.2 mm loose








D walnut 10.0 mm 13.0 mm 1.2 mm loose








4001116163418

4001116163517

4001116163616

4001116163715

4001116163036

4001116163135

4001116163234

4001116163333

4001116163432

4001116163531

4001116163630

4001116163739

4001116163029

4001116163128

4001116163227

4001116163326

4001116163425

4001116163524

4001116163623

4001116163722

4001116123412

4001116123511

4001116123610

4001116123719

4001116123030

4001116123139

4001116123238

4001116123337

4001116123436

4001116123535

4001116123634

4001116123733

4001116123023

4001116123122

4001116123221

4001116123320

4001116123429

4001116123528

4001116123627

4001116123726

Min. OU: 5 pcs.

Plastic (hard PVC)







length: 1.00m

EAN/Itemno.

4001116121609

4001116121616

4001116121623

4001116121630

4001116121647

length: 2.00m

EAN/Itemno.

4001116161605

4001116161612

4001116161629

4001116161636

4001116161643

length: 2.00m

EAN/Itemno.

length: 1.00m

EAN/Itemno.

U-profile




















































5.29

PVC

A

PVC

A

PET

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (hard PVC)




Min. OU: 5 pcs.

Plastic (hard PVC)



Min. OU: 5 pcs.

Plastic (PET)



length: 1.00m

EAN/Itemno.

4001116129940

length: 2.50m

EAN/Itemno.

4001116169946

length: 1.00m

EAN/Itemno.

4001116121661

length: 2.00m

EAN/Itemno.

4001116161667

length: 1.00m

EAN/Itemno.

4001116121654

length: 2.00m

EAN/Itemno.

4001116161650


Edge profile, one-sided











5.30

PVC

A

PET

A

PVC

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Plastic (hard PVC)




Min. OU: 5 pcs.

Plastic (PET)



Min. OU: 5 pcs.

Plastic (hard PVC)



length: 1.00m

EAN/Itemno.

4001116121708

length: 1.00m

EAN/Itemno.

4001116129889

length: 2.50m

EAN/Itemno.

4001116169885

length: 1.00m

EAN/Itemno.

4001116121715

Edge profile, one-sided

Edge profile, two-sided

Edge profile, two-sided








5.31

PET

A

PVC

A B

PVC

A B C D


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (PET)


A transparent 8.5 mm 15.0 mm 0.5 mm 2.0 mm loose


Min. OU: 5 pcs.

Plastic (hard PVC)


A white 8.5 mm 15.0 mm 0.5 mm 2.0 mm loose

B black 8.5 mm 15.0 mm 0.5 mm 2.0 mm loose

Min. OU: 5 pcs.

Plastic (hard PVC)



B grey 14.0 mm loose

C black 14.0 mm loose

D oak 14.0 mm loose

length: 2.50m

EAN/Itemno.

4001116164903

4001116164927

4001116164934

4001116164910

length: 1.00m

EAN/Itemno.

4001116121722

4001116111723

length: 2.00m

EAN/Itemno.

4001116161728

4001116151729

length: 1.00m

EAN/Itemno.

4001116129933

length: 2.50m

EAN/Itemno.

4001116169939

Frame profile

Quarter circle corner bar

Frame profile














5.32

PVC

A

PVC

A

PVC

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Plastic (hard PVC)


A brilliant-white 16.0 mm 5.8 mm 1.0 mm loose





Min. OU: 5 pcs.

Plastic (hard PVC)



Min. OU: 5 pcs.



A chrome look 16.0 mm 5.8 mm 1.0 mm loose




length: 1.00m

EAN/Itemno.

4001116121906

4001116121913

4001116121920

4001116121937

length: 2.00m

EAN/Itemno.

4001116161902

4001116161919

4001116161926

4001116161933

length: 2.50m

EAN/Itemno.

4001116164941

length: 1.00m

EAN/Itemno.

4001116121807

4001116121814

4001116121821

4001116121838

length: 2.00m

EAN/Itemno.

4001116161803

4001116161810

4001116161827

4001116161834



Corner bar





















5.33

ALX

A

ALP

A

PVC

A B


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Anodized aluminium, self-adhesive


A stainless steel visual effect 15.0 mm 15.0 mm 0.5 mm loose

Profiles for DIY and professional purposesStandard profiles | Aluminium and plastic, self-adhesive

Min. OU: 5 pcs.

Powder-coated aluminium, self-adhesive




Min. OU: 5 pcs.

Plastic (hard PVC, foamed), self-adhesive



B oak 14.0 mm loose

length: 1.00m

EAN/Itemno.

4001116126222

4001116126239

length: 2.50m

EAN/Itemno.

4001116166228

4001116166235

length: 1.00m

EAN/Itemno.

4001116126000

4001116126017

length: 2.00m

EAN/Itemno.

4001116166006

4001116166013

length: 1.00m

EAN/Itemno.

4001116126024

length: 2.50m

EAN/Itemno.

4001116166020

Bracket, equal-sided, self-adhesive

Quarter circle corner bar, self-adhesive















5.34

PVC

A

PVC

A

PVC

A B C ED

F G H


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Min. OU: 5 pcs.

Plastic (hard PVC, foamed), self-adhesive




· Suitable for edges with different degree values

Min. OU: 5 pcs.

Plastic (hard and soft PVC), self-adhesive



Min. OU: 5 pcs.

Plastic (hard PVC), hot-embossed, self-adhesive


A polished white 20.0 mm 20.0 mm 1.5 mm loose

B polished grey 20.0 mm 20.0 mm 1.5 mm loose

C polished black 20.0 mm 20.0 mm 1.5 mm loose

D silver 20.0 mm 20.0 mm 1.5 mm loose

E polished champagne 20.0 mm 20.0 mm 1.5 mm loose

F titanium 20.0 mm 20.0 mm 1.5 mm loose

G stainless steel visual effect 20.0 mm 20.0 mm 1.5 mm loose

H chrome look 20.0 mm 20.0 mm 1.5 mm loose

length: 1.00m

EAN/Itemno.

4001116126246

4001116126307

4001116126260

4001116126390

4001116126314

4001116126406

4001116126154

4001116126383

length: 2.50m

EAN/Itemno.

4001116166242

4001116166303

4001116166266

4001116166396

4001116166310

4001116166402

4001116166150

4001116166389

length: 2.50m

EAN/Itemno.

4001116167508

length: 1.00m

EAN/Itemno.

4001116126215

length: 2.50m

EAN/Itemno.

4001116166211

Corner bar, self-adhesive


Combi-bracket, equal-sided, self-adhesive























5.35

PVC

A B C ED

F G H

PET

A B C ED


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Plastic (hard PVC) self-adhesive







B grey 20.0 mm 20.0 mm 1.0 mm loose




C black 20.0 mm 20.0 mm 1.0 mm loose

D beech 20.0 mm 20.0 mm 1.0 mm loose

D beech 30.0 mm 30.0 mm 1.1 mm loose

E rustic oak 20.0 mm 20.0 mm 1.0 mm loose

F light oak 20.0 mm 20.0 mm 1.0 mm loose



H wood white 30.0 mm 30.0 mm 1.1 mm loose


Min. OU: 5 pcs.

Plastic (PET), self-adhesive


A green 25.0 mm 25.0 mm 1.0 mm loose

A green 30.0 mm 30.0 mm 1.1 mm loose

B blue 25.0 mm 25.0 mm 1.0 mm loose

B blue 30.0 mm 30.0 mm 1.1 mm loose

C pink 25.0 mm 25.0 mm 1.0 mm loose

C pink 30.0 mm 30.0 mm 1.1 mm loose

D red 25.0 mm 25.0 mm 1.0 mm loose

D red 30.0 mm 30.0 mm 1.1 mm loose

E yellow 25.0 mm 25.0 mm 1.0 mm loose

E yellow 30.0 mm 30.0 mm 1.1 mm loose

length: 1.00m

EAN/Itemno.

4001116126703

4001116126758

4001116126710

4001116126765

4001116126727

4001116126772

4001116126734

4001116126789

4001116126741

4001116126796

length: 2.50m

EAN/Itemno.

4001116166709

4001116166754

4001116166716

4001116166761

4001116166723

4001116166778

4001116166730

4001116166785

4001116166747

4001116166792

length: 1.00m

EAN/Itemno.

4001116126109

4001116126116

4001116126123

4001116126130

4001116126147

4001116126277

4001116126352

4001116126369

4001116126376

4001116126253

4001116126178

4001116126185

4001116126161

4001116126345

4001116126321

4001116126208

4001116126192

length: 2.50m

EAN/Itemno.

4001116166105

4001116166112

4001116166129

4001116166136

4001116166143

4001116166273

4001116166259

4001116166174

4001116166181

4001116166167

4001116166341

4001116166327

4001116166204

4001116166198
























































5.36

ALX

A

ALX

A

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

· For covering all edges of the plates · The corresponding dimensions are of the profiles are specified as the inner dimension

Min. OU: 5 pcs.

Anodized aluminium Plate thickness

Colour Dim. a Dim. b Dim. c min. max. Packaging

A silver 8.0 mm 6.0 mm 1.5 mm 6.0 mm 8.0 mm loose




Profiles for DIY and professional purposesclampline clamping profiles | Aluminium

· For edging plates · The corresponding dimensions are of the profiles are specified as the inner dimension

Min. OU: 5 pcs.

Anodized aluminium

Colour Dim. a Dim. b Dim. c Plate thickness Packaging









Min. OU: 5 pcs.

Anodized aluminium



length: 1.00m

EAN/Itemno.

4001116180859

length: 2.00m

EAN/Itemno.

4001116180958

length: 1.00m

EAN/Itemno.

4001116180217

4001116180224

4001116180231

4001116180248

4001116180255

4001116180262

4001116180279

length: 2.00m

EAN/Itemno.

4001116180316

4001116180323

4001116180330

4001116180347

4001116180354

4001116180361

4001116180378

length: 1.00m

EAN/Itemno.

4001116180019

4001116180026

4001116180033

4001116180040

length: 2.00m

EAN/Itemno.

4001116180118

4001116180125

4001116180132

4001116180149

clampline angle profile

clampline T-profile

clampline U-profile




























5.37

ALX

A

ALX

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708


Min. OU: 5 pcs.

Anodized aluminium











Min. OU: 5 pcs.

Anodized aluminium









length: 1.00m

EAN/Itemno.

4001116180613

4001116180620

4001116180637

4001116180644

4001116180651

4001116180668

4001116180675

length: 2.00m

EAN/Itemno.

4001116180712

4001116180729

4001116180736

4001116180743

4001116180750

4001116180767

4001116180774

length: 1.00m

EAN/Itemno.

4001116180415

4001116180422

4001116180439

4001116180446

4001116180453

4001116180460

4001116180477

length: 2.00m

EAN/Itemno.

4001116180514

4001116180521

4001116180538

4001116180545

4001116180552

4001116180569

4001116180576

clampline H-profile

clampline corner profile































5.38

ALX

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es


Min. OU: 5 pcs.

Anodized aluminium

Colour Dim. a Dim. b Dim. c Dim. d Plate thickness Packaging



length: 1.00m

EAN/Itemno.

4001116181252

length: 2.00m

EAN/Itemno.

4001116181351

clampline hinge profile




5.39

PVC

A

PA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· There are the appropriate clampsoft corners for nice, rounded corners · Please use the clampsoft corner here for angle profiles

Min. OU: 5 pcs.

Plastic (hard PVC)









Profiles for DIY and professional purposesclampsoft clamping profiles | Plastic

Min. OU: 5 pcs.

Plastic (PA)

Colour Dim. a Plate thickness PU Packaging

A white 5.9 mm 6.0 mm 2 pieces SS box







EAN/ Itemno.

4001116189906

4001116189913

4001116189920

4001116189937

4001116189944

4001116189951

4001116189968

length: 1.00m

EAN/Itemno.

4001116186417

4001116186424

4001116186431

4001116186448

4001116186455

4001116186462

4001116186479

length: 2.00m

EAN/Itemno.

4001116186516

4001116186523

4001116186530

4001116186547

4001116186554

4001116186561

4001116186578

clampsoft angle profile

clampsoft corner for angle profile
























5.40

PVC

A

PA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

· There are the appropriate clampsoft corners for nice, rounded corners · Please use the clampsoft corner here for U profiles

Min. OU: 5 pcs.

Plastic (hard PVC)










Min. OU: 5 pcs.

Plastic (PA)









EAN/ Itemno.

4001116189807

4001116189814

4001116189821

4001116189838

4001116189845

4001116189852

4001116189869

length: 1.00m

EAN/Itemno.

4001116186615

4001116186622

4001116186639

4001116186646

4001116186653

4001116186660

4001116186677

length: 2.00m

EAN/Itemno.

4001116186714

4001116186721

4001116186738

4001116186745

4001116186752

4001116186769

4001116186776

clampsoft U-profile

clampsoft corner for U-profile
























5.41

PVC

A

PA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

· There are the appropriate clampsoft corners for nice, rounded corners · Please use the clampsoft corner here for corner profiles

Min. OU: 5 pcs.

Plastic (hard PVC)







Min. OU: 5 pcs.

Plastic (PA)






EAN/ Itemno.

4001116189739

4001116189746

4001116189753

4001116189760

length: 1.00m

EAN/Itemno.

4001116186844

4001116186851

4001116186868

4001116186875

length: 2.00m

EAN/Itemno.

4001116186943

4001116186950

4001116186967

4001116186974

clampsoft corner profile

clampsoft corner for corner profile















5.42


Hard

ware catalogue | 97002 | 01 2017 | 71708

Pro

files

for

DIY

and

pro

fess

iona

l pur

pos

es

Profiles for DIY and professional purposes

Steel profiles


6.03


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Steel profiles Range overview

An overview of the production processes

All products in our steel profile range are subjected to a special sur-

face treatment and refined. Thanks to the use of phosphating, our

steel profiles come with a deep-acting, rust-inhibiting primer that is

totally ecological – and can be instantly painted, welded, galvanised

or otherwise worked.

Stainless steel

Depending on the alloy, stainless steel profiles are characterised

by a high resistance to chemicals and are a good choice for many

uses. Stainless steel is extremely popular in both public areas and

domestic homes.

Hot-rolled steel

This production process uses high temperatures and low levels of

force to shape the rolled material into profiles. The steel original-

ly has mill scale but this is reliably removed through our special

surface treatment process. A temporary, protective anti-corrosion

coating is applied.

Galvanised steel

Galvanised steel offers perfect corrosion protection. Galvanising in-

volves dipping the steel in molten zinc, with which it forms a firm

bond. The zinc coating on steel profiles extends their service life by

decades.

Cold-formed steel

This production process uses ‘sheet steel coils’. Cold-formed steel

with relatively high dimensional stability can only be produced with

thin wall thicknesses.

Drawn steel

In this production process, the profile is drawn to form untreated

steel. Untreated steel has a higher dimensional stability than hot-

rolled steel.

6.04

EDL

STA

STA

STA

STA


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Standard profiles | Stainless steel 6.05 – 6.07

Standard profiles | Steel, rolled 6.08 – 6.13

Standard profiles | Steel, galvanized 6.14 – 6.15

Standard profiles | Steel, drawn 6.15 – 6.16

Standard profiles | ferroplatan® 6.17

· Angle, equal-sided· Angle, unequal-sided· Flat bar· Rectangular tube· Round bar· Round tube· Square tube· Square U

· Angle, equal-sided hot-rolled· Angle, equal-sided in cold rolled steel· Angle, unequal-sided in cold rolled steel· Concrete-ribbed steel, hot-rolled· Flat bar, hot-rolled· Rectangular tube· Round bar, hot-rolled· Round tube in cold rolled steel· Square bar, hot-rolled· Square bar, hot-rolled, coiled

· Square tube, cold-rolled· T-profile, hot-rolled· U-profile

· Angle, equal-sided in cold rolled steel, galvanized· Angle, unequal-sided in cold rolled steel, galvanized· Flat bar, cold-rolled, galvanized· U-profile, cold-rolled, galvanized

· Flat bar, drawn steel· Round bar, drawn steel· Square bar, drawn steel

· Angle, equal-sided, ferroplatan®

· Bracket, equal-sided, self-adhesive, ferroplatan®

Steel profilesRange overview

6.05

EDL

A

EDL

A

EDL

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Stainless steel V2A


A stainless steel 15.0 mm 1.5 mm loose



Steel profilesStandard profiles | Stainless steel

Min. OU: 5 pcs.

Stainless steel V2A


A stainless steel 10.0 mm 10.0 mm 0.5 mm loose








Min. OU: 5 pcs.

Stainless steel V2A



length: 1.00m

EAN/Itemno.

4001116340512

length: 2.00m

EAN/Itemno.

4001116341519

length: 1.00m

EAN/Itemno.

4001116340406

4001116340413

4001116340420

4001116340437

4001116340444

4001116340451

4001116340468

4001116340475

length: 2.00m

EAN/Itemno.

4001116341403

4001116341410

4001116341427

4001116341434

4001116341441

length: 2.50m

EAN/Itemno.

4001116341809

4001116341816

4001116341823

4001116341830

4001116341847

4001116341854

4001116341861

4001116341878

length: 1.00m

EAN/Itemno.

4001116340109

4001116340116

4001116340123

length: 2.00m

EAN/Itemno.

4001116341106

4001116341113

4001116341120

Flat bar


Angle, equal-sided

































6.06

EDL

A

EDL

A

EDL

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Min. OU: 5 pcs.

Stainless steel V2A




Min. OU: 5 pcs.

Stainless steel V2A







Min. OU: 5 pcs.

Stainless steel V2A


A stainless steel 6.0 mm loose



length: 1.00m

EAN/Itemno.

4001116340307

4001116340314

4001116340321

length: 2.00m

EAN/Itemno.

4001116341304

4001116341311

4001116341328

length: 1.00m

EAN/Itemno.

4001116340208

4001116340215

4001116340222

4001116340239

4001116340246

length: 2.00m

EAN/Itemno.

4001116341205

4001116341212

4001116341229

4001116341236

4001116341243

length: 1.00m

EAN/Itemno.

4001116340628

length: 2.00m

EAN/Itemno.

4001116341625

Square U

Round bar

Round tube






















6.07

EDL

A

EDL

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Stainless steel V2A






Min. OU: 5 pcs.

Stainless steel V2A




length: 1.00m

EAN/Itemno.

4001116340734

4001116340741

length: 2.00m

EAN/Itemno.

4001116341731

4001116341748

length: 1.00m

EAN/Itemno.

4001116340703

4001116340710

4001116340727

length: 2.00m

EAN/Itemno.

4001116341700

4001116341717

4001116341724

Square tube

Rectangular tube













6.08

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Min. OU: 5 pcs.

Steel, hot-rolled


A steel grey 10.0 mm 4.0 mm loose











Steel profilesStandard profiles | Steel, rolled

Min. OU: 5 pcs.

Steel, hot-rolled


A steel grey 20.0 mm 20.0 mm 3.0 mm loose





length: 1.00m

EAN/Itemno.

4001116343643

4001116343650

4001116343667

4001116343674

4001116343681

length: 2.00m

EAN/Itemno.

4001116345647

4001116345654

4001116345661

4001116345678

4001116345685

length: 2.50m

EAN/Itemno.

4001116348648

4001116348655

4001116348662

4001116348679

length: 1.00m

EAN/Itemno.

4001116343100

4001116343117

4001116343124

4001116343131

4001116343148

4001116343155

4001116343179

4001116343186

4001116343193

4001116343209

4001116343216

length: 2.00m

EAN/Itemno.

4001116345104

4001116345111

4001116345128

4001116345135

4001116345142

4001116345159

4001116345173

4001116345180

4001116345197

4001116345203

4001116345210

length: 2.50m

EAN/Itemno.

4001116348136

4001116348150

4001116348181

4001116348204

Flat bar, hot-rolled

Angle, equal-sided hot-rolled











































6.09

STA

A

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Steel, cold-rolled







Min. OU: 5 pcs.

Steel, cold-rolled



Min. OU: 5 pcs.

Steel, cold-rolled






length: 1.00m

EAN/Itemno.

4001116343803

4001116343810

4001116343827

4001116343834

length: 2.00m

EAN/Itemno.

4001116345807

4001116345814

4001116345821

4001116345838

length: 1.00m

EAN/Itemno.

4001116343704

length: 2.00m

EAN/Itemno.

4001116345708

length: 1.00m

EAN/Itemno.

4001116343605

4001116343612

4001116343629

4001116343636

length: 2.00m

EAN/Itemno.

4001116345609

4001116345616

4001116345623

4001116345630

Angle, equal-sided in cold rolled steel

U-profile

Angle, unequal-sided in cold rolled steel






















6.10

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Min. OU: 5 pcs.

Steel, cold-rolled













Min. OU: 5 pcs.

Steel, hot-rolled


A steel grey 6.0 mm loose





length: 1.00m

EAN/Itemno.

4001116343506

4001116343513

4001116343520

4001116343537

4001116343544

length: 2.00m

EAN/Itemno.

4001116345500

4001116345517

4001116345524

4001116345531

4001116345548

length: 1.00m

EAN/Itemno.

4001116343308

4001116343315

4001116343322

4001116343339

4001116343346

4001116343353

4001116343360

4001116343377

4001116343384

4001116343407

length: 2.00m

EAN/Itemno.

4001116345302

4001116345319

4001116345326

4001116345333

4001116345340

4001116345357

4001116345364

4001116345371

4001116345388

4001116345401

Round tube in cold rolled steel

Round bar, hot-rolled

































6.11

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Steel, cold-rolled












Min. OU: 5 pcs.

Steel, cold-rolled






length: 1.00m

EAN/Itemno.

4001116344107

4001116344114

4001116344121

4001116344138

length: 2.00m

EAN/Itemno.

4001116346101

4001116346118

4001116346125

4001116346132

length: 2.50m

EAN/Itemno.

4001116349119

length: 1.00m

EAN/Itemno.

4001116343902

4001116343919

4001116343926

4001116343933

4001116343940

4001116343964

4001116343971

4001116343988

4001116343995

length: 2.00m

EAN/Itemno.

4001116345906

4001116345913

4001116345937

4001116345944

4001116345968

4001116345975

4001116345982

4001116345999

length: 2.50m

EAN/Itemno.

4001116348969

4001116348976

4001116348983

Square tube, cold-rolled

Rectangular tube
































6.12

STA

A

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Min. OU: 5 pcs.

Steel, hot-rolled








Min. OU: 5 pcs.

Steel, coiled





Min. OU: 5 pcs.

Steel





length: 1.00m

EAN/Itemno.

4001116344435

4001116344442

4001116344459

length: 2.00m

EAN/Itemno.

4001116346439

4001116346446

4001116346453

length: 1.00m

EAN/Itemno.

4001116344404

4001116344411

4001116344428

length: 2.00m

EAN/Itemno.

4001116346408

4001116346415

4001116346422

length: 1.00m

EAN/Itemno.

4001116344206

4001116344213

4001116344220

4001116344237

4001116344244

length: 2.00m

EAN/Itemno.

4001116346200

4001116346217

4001116346224

4001116346231

4001116346248

Square bar, hot-rolled

Concrete-ribbed steel, hot-rolled

Square bar, hot-rolled, coiled


























6.13

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Steel, hot-rolled





length: 1.00m

EAN/Itemno.

4001116344305

4001116344312

length: 2.00m

EAN/Itemno.

4001116346309

4001116346316

T-profile, hot-rolled






6.14

STA

A

STA

A

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Min. OU: 5 pcs.

Galvanized steel




Steel profilesStandard profiles | Steel, galvanized

Min. OU: 5 pcs.

Galvanized steel





Min. OU: 5 pcs.

Galvanized steel




length: 1.00m

EAN/Itemno.

4001116394041

4001116394058

length: 2.00m

EAN/Itemno.

4001116394140

4001116394157

length: 2.50m

EAN/Itemno.

4001116394249

4001116394256

length: 1.00m

EAN/Itemno.

4001116394010

4001116394027

4001116394034

length: 2.00m

EAN/Itemno.

4001116394119

4001116394126

4001116394133

length: 2.50m

EAN/Itemno.

4001116394218

4001116394225

4001116394232

length: 1.00m

EAN/Itemno.

4001116394065

4001116394003

length: 2.00m

EAN/Itemno.

4001116394164

4001116394102

length: 2.50m

EAN/Itemno.

4001116394263

4001116394201

Flat bar, cold-rolled, galvanized

Angle, unequal-sided in cold rolled steel, galvanized

Angle, equal-sided in cold rolled steel, galvanized

























6.15

STA

A

STA

A

STA

A


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

Galvanized steel



Steel profilesStandard profiles | Steel, galvanized | Steel, drawn

Min. OU: 5 pcs.

Steel, drawn







Min. OU: 5 pcs.

Steel, drawn








length: 1.00m

EAN/Itemno.

4001116344602

4001116344619

4001116344626

4001116344633

4001116344640

4001116344657

length: 1.00m

EAN/Itemno.

4001116344503

4001116344510

4001116344527

4001116344534

4001116344541

length: 1.00m

EAN/Itemno.

4001116394072

length: 2.00m

EAN/Itemno.

4001116394171

length: 2.50m

EAN/Itemno.

4001116394270

Flat bar, drawn steel

U-profile, cold-rolled, galvanized

Round bar, drawn steel


















6.16

STA

A


Hard

ware catalogue | 97002 | 01 2017 | 71708

Ste

el p

rofil

es

Steel profilesStandard profiles | Steel, drawn

Min. OU: 5 pcs.

Steel, drawn







length: 1.00m

EAN/Itemno.

4001116344701

4001116344718

4001116344725

4001116344732

4001116344749

Square bar, drawn steel







6.17

STA

A B

STA

A B


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

Min. OU: 5 pcs.

ferroplatan®, steel


A wood decor, light 15.5 mm 15.5 mm 0.8 mm shrink-wrapped


B wood decor, dark 15.5 mm 15.5 mm 0.8 mm shrink-wrapped


Steel profilesStandard profiles | ferroplatan®

Min. OU: 5 pcs.

ferroplatan®, steel, self-adhesive




length: 1.00m

EAN/Itemno.

4001116359521

4001116359538

length: 1.00m

EAN/Itemno.

4001116359408

4001116359422

4001116359415

4001116359439

Angle, equal-sided, ferroplatan®

Bracket, equal-sided, self-adhesive, ferroplatan®










Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-1

Hardware catalogueIndex

alfer® makes you mobile

Start browsing and get enjoying! The complete product catalogue can also be downloaded in PDF format from our website www.alfer.com, where you will also find many other use-ful services and suggestions in relation to the fascinating alfer® product world. For example, look forward to plenty of practical tips and tricks for existing and budding DIY enthusiasts. Get inspiration from our refined building ide-as. Use our comprehensive download area to obtain catalogues, brochures and building instructions. And make sure you take a look at our helpful application and product videos. They are well worth watching!

We look forward to your visit to www.alfer.com

Information about alfer® and the full product range plus plenty of other useful information can be found online. Our website is also optimised for mobile devices and tablets. Wherever you are, you can find what you are you looking for – quickly and clearly.


Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-2

alfer® ranges

combitech® system | BasisEverything fits together:The combitech® system: flexibly combinable. One product highlight is the typical drill alignment groove – just one of many practical ideas from alfer®. For example, this marks the opposite sides of a round-ed pipe making vertical drilling through the middle easy. The Basis range from combitech® comprises standard aluminium and plastic profiles such as pipes, brackets, square tubes and much, much more.

combitech® system | connect 23.5 mmThe combitech® connect connectors can be used to simply connect 23.5 mm square tubes. Whether frames, shelves or anything else you wish to build, the stable polyamide connectors hold everything to-gether. The connectors are available in two colours: black and white.

combitech® system | Sheets, plates and accessories A huge selection of sheets provides the right product for many applications. The alfer® sheets come in many different thicknesses and materials. Multiple different finish options are also available from functional to decorative.

Prismatech and Multitube: The profiles for framing and stabilising the sheets are particularly practical. alfer® offers clever options to this end through Prismatech and Multitube.


logika® is a new addition to the combitech® systems in the form of a logically perforated profile. logika® profiles enable you to build shelves, tables, steps, and much more. This will enable you to create order in rooms or vehicles. The holes in the profiles are made in such a way that they are as small as possible but as big as necessary to ensure high stability and so that, for example, at least three brackets will fit on top of each other and a further bracket can be screwed in place vertically to the others. The profiles are particularly suited for use in cold-storage rooms, cellars and wet areas.

Profiles for DIY and professional purposes Flat bars, brackets with even and uneven branches, U-profiles, round bars, rectangular tubes and a whole range of other profiles. These form the basis for you to turn your ideas into reality. The classic semi-finishedproducts for DIY enthusiasts and professionals are made from aluminium with anodised or untreated finishes, as well as many other materials.

Steel profilesSteel is the most commonly used metallic material and offers an array of impressive benefits: high tensile strength, good malleability and thermal conductivity. The noteworthy material strength and rigidity ensure optimum stability. Furthermore, steel is extremely easy to work and resource-conserving as it can be re-cycled without any loss of quality. alfer® steel profiles are available as flat, angle, U, T, round and square profiles and tubes as well as in the form of sectional steel and wide-flanged beams.

combitech® system | Model construction alfer® has a special place in its heart for model builders. Model builders can therefore also acquire combitech® connect connectors for 7.5 mm profiles. Numerous special shapes such as the 150° angle connector are also available. The popular benefits such as the drill alignment groove and the easy-to-combine dimensions also prove their worth in the model construction range.

Discover the full diversity of the model construction range in the online shop: www.alfer-shop.com



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-3

alfer® ranges

Tile edgingsClean edges and finishes with aluminium profiles.Whether you lay your tiles yourself or have them laid by a specialist, there is one important ‘side issue’ that you should never forget. The alfer® profiles can be used on corners and edges, transitions between floor coverings and stairways. Clean edges and transitions not only look good but are also hygienic as they prevent any fraying or scuffing and improve water-resistance.

Floor and room profiles Transitions between different floor coverings, a clean and protective edging or stair edges, all available in a whole range of colours, materials and décors. The stair profiles provide safety and particularly protect textile coverings against scuffing on the edges, ensuring they retain their visual appeal for many years. The profiles are extremely colour stable and completely crush-proof. For minor damage to aged stairs, alfer® offers stair repair brackets for simple restoration. alfer® door sealing brushes simply and effec-tively prevent drafts.

Profiles for parquet, laminate and designer floorsPerfectly laid parquet and laminate floorboards the easy wayThe ease of laying ready-to-install parquet, cork and laminate floorboards makes them extremely popular with DIY enthusiasts. And anyone who appre-ciates this feature will love the parquet and laminate profiles from alfer®. With clipstech®, clipstech®-var-io and clipstech®-plus, you have the perfect profiles for edges and transitions between floor coverings. The edges are therefore cleanly sealed and stumbling hazards are prevented. The clipstech® profiles are installed so that no screws are subsequently visible. The cover is simply clipped on.

cabelino® baseboards Baseboards are ideal for concealing retrospectively laid cables and lines. The cabelino® baseboards have been designed for precisely this purpose. The baseboards are TÜV-certified and comply with the latest safety regulations. The décors of the baseboards match those of the clipstech® range. cabelino® baseboards are also noteworthy from a technical perspective. Thanks to the lock or clamp gap, they can be infinitely adjusted by up to 10 mm so that the baseboard can simply be pressed down if the floor set-tles over the years.

combitech® system | coaxis®

A further addition to the combitech® system is the coaxis® profile. This consists of four hollow chambers coaxially located around the core. The special design of the aluminium profiles ensure excellent longitu-dinal and lateral stability with the lowest weight. Equipped with drill alignment holes, the profiles are ex-tremely simple to use and the angle bracket and hook can even be installed without drilling, using simply a square nut and screw. The profiles are ideal for use in damp areas and can even be used in the garden thanks to their weather-resistance.

Storage range The broad version of the coaxis® profile can be horizontally, vertically and diagonally attached to walls and ceilings, allowing you to make optimal use of the available space. With the right hook, everything finds a place, whether indoors or out. Whether in the garden, the garage, the cellar or the attic: everything can be securely stored. The rubber caps on the hooks ensure that nothing gets scratched. The coaxis® hooks are available in aluminium or galvanised steel. The alfer® bicycle stand is made of lightweight, weather-re-sistant aluminium. It is suitable for all bikes, from racing bikes and city bikes to mountain bikes. It comes either as a rigid or an infinitely adjustable version, individually or as a three-piece set.



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-4

Frame edging profile ......................................................................................................5.21Frame profile ..................................................................................................................5.31Furniture caster ....................................................................................................1.33 | 2.11Guide rail profile, assembly at the top ....................................................... 5.11 | 5.18 | 5.29Guide rail profile, assembly below ............................................................. 5.11 | 5.18 | 5.29Gusset ..................................................................................................................1.31 | 3.38H section .................................................................................................... 1.14 | 2.16 | 5.19Hammer effect sheet......................................................................................................3.18Hand wheel, black, with thread .....................................................................................1.40Handle profile ............................................................................................. 5.12 | 5.19 | 5.20Hanging kit .....................................................................................................................3.32Hard ferrite magnet with plastic case ............................................................................3.33Hexagon cap ..................................................................................................................1.34Hexagon cap nut, self-locking, DIN 986 ........................................................................1.38Hexagon connection sleeve ...........................................................................................1.41Hexagon nut ...................................................................................................................1.37Hexagon nut, DIN 934....................................................................................................1.37Hexagon nut, self-locking, DIN 985 ...............................................................................1.38Hinge profile ...................................................................................................................3.28Hinge profile for Ø 6.1 mm .............................................................................................5.17Hinged plate, black, with thread ....................................................................................1.41Knurled nut, black, with thread ......................................................................................1.40Ladder step profile .........................................................................................................5.12Lifting eye nut, DIN 582 .................................................................................................1.39Long tube sleeve ............................................................................................................1.22Long tube sleeve, vibratory finish ..................................................................................1.23Maxi-saw ........................................................................................................................1.50Metric threaded rod .............................................................................................1.29 | 1.30Metric threaded tube .....................................................................................................1.30Multi-clamp ....................................................................................................................1.50Mutlitube sleeve nut kit ..................................................................................................3.33Oval-headed screw set ..................................................................................................4.12Perforated sheet hook, large..........................................................................................3.34Perforated sheet hook, small .........................................................................................3.34Piccolo-mitre box MP 7 .................................................................................................1.48Plain sheet, steel, untreated, processed ........................................................................3.15Plastic panel (hard PVC), hot-embossed, self-adhesive ................................................3.11Plastic panel (PC, transparent) ......................................................................................3.11Precision-mitre box MP 8 ..............................................................................................1.48Precision-mitre box MP 9 ..............................................................................................1.48Precision-mitre box with clamp element MP 10 ............................................................1.49Prismatech sleeve nut kit, uncoated ..............................................................................3.29‘Profi’ keyhole saw .........................................................................................................1.50‘Profi’-angle, with bevel ruler and parallel-template ......................................................1.51‘Profi’-ruler .....................................................................................................................1.51Quarter circle corner bar ................................................................................................5.31Quarter circle corner bar, self-adhesive.........................................................................5.33Rectangular tube .....................................................................1.09 | 1.25 | 5.10 | 6.07 | 6.11Rectangular U ......................................................................................................1.11 | 1.26Roughcast sheet ............................................................................................................3.19Round bar ...........................................................1.07 | 1.19 | 1.24 | 5.09 | 5.16 | 5.23 | 6.06Round bar, drawn steel ..................................................................................................6.15Round bar, hot-rolled .....................................................................................................6.10Round hole sheet ....................................................................................... 3.22 | 3.23 | 3.24Round studded sheet ....................................................................................................3.17Round tube .........................................................1.07 | 1.24 | 3.31 | 5.09 | 5.16 | 5.22 | 6.06Round tube in cold rolled steel ......................................................................................6.10Rubber buffer, black, with double-sided thread ............................................................1.42Rubber buffer, black, with thread ..................................................................................1.41Rubber cap ....................................................................................................................1.33Sealing profile ......................................................................................................3.30 | 3.38Serrated lock washer, DIN 6798A ..................................................................................1.47Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ........................................1.43 | 1.44Sheet, aluminium, anodized ...........................................................................................3.13Sheet, aluminium, coated ..............................................................................................3.12Sheet, aluminium, uncoated ..........................................................................................3.12Sheet, raw steel .............................................................................................................3.14Sheet, solid brass ..........................................................................................................3.16Sheet, solid copper ........................................................................................................3.16Sheet, stainless steel .....................................................................................................3.16Sheet, steel, galvanized .................................................................................................3.14Shelf unit foot .......................................................................................................1.34 | 4.12Short tube sleeve ...........................................................................................................1.22Short tube sleeve, vibratory finish..................................................................................1.22Slotted hole sheet ..........................................................................................................3.22Square bar ...........................................................................................................5.18 | 5.23Square bar, drawn steel .................................................................................................6.16Square bar, hot-rolled ....................................................................................................6.12Square bar, hot-rolled, coiled ........................................................................................6.12Square hole sheet ................................................................................................3.23 | 3.24Square nut, self-locking; DIN 557 ..................................................................................1.39Square rod ...........................................................................................................1.09 | 1.24Square studded sheet ...................................................................................................3.17Square T ...............................................................................................................1.14 | 1.28Square tube .............................................. 1.08 | 1.25 | 2.13 | 2.18 | 3.31 | 5.10 | 5.17 | 6.07Square tube, 1 branch .........................................................................................1.15 | 2.15Square tube, 1 branch offset ...............................................................................1.16 | 2.17Square tube, 2 branches 180º .............................................................................1.16 | 2.16

2 prisms MP 13 (for mitre box MP 10) ...........................................................................1.4945° 3-D T-connector, left, 3 spigots ..............................................................................2.0745° 3-D T-connector, right, 3 spigots ............................................................................2.0745º nodal connector, 4 spigots ......................................................................................2.0890º edge connector, 3 spigots .......................................................................................2.0590º nodal connector, 4 spigots ......................................................................................2.0690º nodal connector, 5 spigots ......................................................................................2.0690º nodal connector, 6 spigots ......................................................................................2.0790º square connector, 2 spigots ....................................................................................2.0590º T-connector, 3 spigots ............................................................................................2.05Adapter sleeve ...............................................................................................................2.10Adhesive cord, strapless, with covering tape ................................................................3.30Adjustable foot .....................................................................................................1.34 | 2.11Adjustable foot, black, with thread ................................................................................1.42Adjustable ring, DIN 705 ................................................................................................1.43Anchor nut, DIN 7965 ....................................................................................................1.40Angle profile, one-sided .......................................................................................3.28 | 3.29Angle, equal-sided .................1.11 | 1.12 | 1.27 | 3.35 | 5.07 | 5.13 | 5.22 | 5.24 | 5.25 | 6.05Angle, equal-sided 120° .................................................................................................3.31Angle, equal-sided hot-rolled.........................................................................................6.08Angle, equal-sided in cold rolled steel ...........................................................................6.09Angle, equal-sided in cold rolled steel, galvanized ........................................................6.14Angle, equal-sided, ferroplatan® ..................................................................................6.17Angle, equal-sided, slotted ..................................................................................4.07 | 4.10Angle, inside, equal-sided ..............................................................................................3.36Angle, unequal-sided ...................... 1.12 | 1.13 | 1.27 | 3.35 | 5.08 | 5.14 | 5.26 | 5.27 | 6.05Angle, unequal-sided in cold rolled steel .......................................................................6.09Angle, unequal-sided in cold rolled steel, galvanized ....................................................6.14Angle, unequal-sided, slotted .................................................................... 4.07 | 4.08 | 4.11Articulated connector, 2 spigots ....................................................................................2.09Articulated flange connector, 1 spigot ...........................................................................2.08Barleycorn ......................................................................................................................3.19Bolt clamp ......................................................................................................................3.34Bracket, equal-sided, self-adhesive .......................................................... 5.33 | 5.34 | 5.35Bracket, equal-sided, self-adhesive, ferroplatan® .......................................................6.17Builder’s square with spirit level ....................................................................................1.51Case corner ....................................................................................................................3.38Checker plate .......................................................................................................3.20 | 3.21clampline angle profile ...................................................................................................5.36clampline corner profile .................................................................................................5.37clampline H-profile .........................................................................................................5.37clampline hinge profile ...................................................................................................5.38clampline T-profile .........................................................................................................5.36clampline U-profile .........................................................................................................5.36clampsoft angle profile...................................................................................................5.39clampsoft corner for angle profile ..................................................................................5.39clampsoft corner for corner profile ................................................................................5.41clampsoft corner for U-profile ........................................................................................5.40clampsoft corner profile .................................................................................................5.41clampsoft U-profile ........................................................................................................5.40Combi-bracket, equal-sided, self-adhesive ...................................................................5.34Compression spring .......................................................................................................1.35Concrete-ribbed steel, hot-rolled...................................................................................6.12Corner angle 120° set ....................................................................................................3.32Corner angle 90° set ......................................................................................................3.32Corner bar ......................................................................................................................5.32Corner bar, self-adhesive ...............................................................................................5.34Corrugated sheet ...........................................................................................................3.17Countersunk screw set ..................................................................................................1.36Covering profile, one-sided............................................................................................3.27Covering profile, one-sided, vibratory finish ..................................................................3.29Covering profile, two-sided ............................................................................................3.27Cross connector, 4 spigots ............................................................................................2.06Cross hole sheet ............................................................................................................3.22Cylinder head screw set ................................................................................................4.12Design sheet structure .........................................................................................3.10 | 3.11Design sheet with square holes .....................................................................................3.10Design sheet with square studs .....................................................................................3.10Design sheet, corrugated ...............................................................................................3.09Design sheet, flexible .....................................................................................................3.09Design sheet, smooth ....................................................................................................3.09Double adhesive tape with intermediate support ..........................................................3.30Double tube....................................................................................................................1.20Double tube, vibratory finish ..........................................................................................1.21Edge profile, one-sided ........................................................................................5.29 | 5.30Edge profile, two-sided ..................................................................................................5.30Edge protecting profile .............................................................................. 3.33 | 5.12 | 5.15Edge protecting profile, round .............................................................................5.21 | 5.32End cap, rectangular ......................................................................................................1.32End cap, round ..............................................................................................................1.32End cap, square ...................................................................................................1.32 | 2.12Eye bolt, DIN 444 ...........................................................................................................1.42Flange connector, 1 spigot ............................................................................................2.08Flat bar ................................................................1.13 | 1.28 | 5.07 | 5.13 | 5.22 | 5.24 | 6.05Flat bar, cold-rolled, galvanized .....................................................................................6.14Flat bar, drawn steel .....................................................................................................6.15Flat bar, hot-rolled .........................................................................................................6.08Flat bar, slotted ....................................................................................................4.05 | 4.09

Product names A–Z



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-5

Square tube, 2 branches inside ...........................................................................1.17 | 2.17Square tube, 2 branches offset ...........................................................................1.17 | 2.17Square tube, cold-rolled ................................................................................................6.11Square tube, slotted ............................................................................................4.05 | 4.06Square U .............................................................1.10 | 1.26 | 2.14 | 2.18 | 3.35 | 3.37 | 6.06Square U, 2 branches 180º ........................................................................ 1.16 | 2.16 | 3.37Step drill .........................................................................................................................1.31Stretch metal ........................................................................................................3.25 | 3.26Support profile, one-sided .............................................................................................3.27Support profile, two-sided .............................................................................................3.28T-profile ...................................................................................................... 1.14 | 5.11 | 5.19T-profile, hot-rolled ........................................................................................................6.13T-profile, slotted .............................................................................................................4.08Tension spring......................................................................................................1.35 | 1.36Threaded plug ......................................................................................................1.33 | 2.11Triple tube, vibratory finish.............................................................................................1.21Tube-tube 90º, vibratory finshing ..................................................................................1.21Tube, 1 long branch .......................................................................................................1.18Tube, 1 long branch, vibratory finish .............................................................................1.18Tube, 1 short branch ......................................................................................................1.17

Tube, 1 short branch, vibratory finish ............................................................................1.18Tube, 2 branches 180º ...................................................................................................1.19Tube, 2 branches 180º, vibratory finish .........................................................................1.19Tube, 2 branches 90º .....................................................................................................1.20Tube, 2 branches 90º, vibratory finish ...........................................................................1.20Turnbuckle with hook and eye, DIN 1480 ......................................................................1.36U-profile ........................................................................................... 5.08 | 5.15 | 5.28 | 6.09U-profile, cold-rolled, galvanized ...................................................................................6.15U-profile, slotted ........................................................................................ 4.06 | 4.09 | 4.10Universal deburrer ...................................................................................... 1.31 | 2.10 | 4.13‘Vario’-mitre box MP 14 .................................................................................................1.49Washer, DIN 125 ..................................................................................................1.46 | 1.47Washer, DIN 9021 ................................................................................................1.45 | 1.46Wing nut, American shape .............................................................................................1.39

Product names A–Z



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-6

01056 Angle, unequal-sided .........................................................................................5.1401060 U-profile .............................................................................................................5.1501061 U-profile .............................................................................................................5.1501062 U-profile .............................................................................................................5.1501063 U-profile .............................................................................................................5.1501064 U-profile .............................................................................................................5.1501065 U-profile .............................................................................................................5.1501070 Square tube........................................................................................................5.1701071 Square tube........................................................................................................5.1701072 Square tube........................................................................................................5.1701073 Square tube........................................................................................................5.1701074 Square tube........................................................................................................5.1701080 Square bar .........................................................................................................5.1801081 Square bar .........................................................................................................5.1801082 Square bar .........................................................................................................5.1801090 T-profile ..............................................................................................................5.1901091 T-profile ..............................................................................................................5.1901100 H-profile .............................................................................................................5.1901101 H-profile .............................................................................................................5.1901102 H-profile .............................................................................................................5.1901103 H-profile .............................................................................................................5.1901104 H-profile .............................................................................................................5.1901110 Hinge profile for Ø 6.1 mm .................................................................................5.1701115 Edge protecting profile, round ...........................................................................5.2101116 Edge protecting profile, round ...........................................................................5.2101117 Edge protecting profile, round ...........................................................................5.2101118 Edge protecting profile, round ...........................................................................5.2101139 Guide rail profile, assembly at the top ...............................................................5.1801140 Guide rail profile, assembly below .....................................................................5.1801141 Frame edging profile ..........................................................................................5.2101210 Flat bar ...............................................................................................................5.1301212 Flat bar ...............................................................................................................5.1301213 Flat bar ...............................................................................................................5.1301214 Flat bar ...............................................................................................................5.1301221 Round tube ........................................................................................................5.1601222 Round tube ........................................................................................................5.1601223 Round tube ........................................................................................................5.1601240 Angle, equal-sided .............................................................................................5.1301241 Angle, equal-sided .............................................................................................5.1301242 Angle, equal-sided .............................................................................................5.1301243 Angle, equal-sided .............................................................................................5.1301244 Angle, equal-sided .............................................................................................5.1301250 Angle, unequal-sided .........................................................................................5.1401251 Angle, unequal-sided .........................................................................................5.1401270 Square tube........................................................................................................5.1701272 Square tube........................................................................................................5.1701273 Square tube........................................................................................................5.1701315 Edge protecting profile, round ...........................................................................5.2101316 Edge protecting profile, round ...........................................................................5.2101317 Edge protecting profile, round ...........................................................................5.2101318 Edge protecting profile, round ...........................................................................5.2101401 Edge protecting profile .......................................................................................5.1501402 Edge protecting profile .......................................................................................5.1501403 Handle profile .....................................................................................................5.1901404 Handle profile .....................................................................................................5.2001405 Handle profile .....................................................................................................5.2001410 Handle profile .....................................................................................................5.2001542 Angle, equal-sided .............................................................................................5.1301543 Angle, equal-sided .............................................................................................5.1301544 Angle, equal-sided .............................................................................................5.1301550 Angle, unequal-sided .........................................................................................5.1401551 Angle, unequal-sided .........................................................................................5.1401570 Square tube........................................................................................................5.1702010 Flat bar ...............................................................................................................5.1302012 Flat bar ...............................................................................................................5.1302013 Flat bar ...............................................................................................................5.1302020 Round tube ........................................................................................................5.1602021 Round tube ........................................................................................................5.1602022 Round tube ........................................................................................................5.1602023 Round tube ........................................................................................................5.1602024 Round tube ........................................................................................................5.1602040 Angle, equal-sided .............................................................................................5.1302041 Angle, equal-sided .............................................................................................5.1302042 Angle, equal-sided .............................................................................................5.1302043 Angle, equal-sided .............................................................................................5.1302210 Flat bar ...............................................................................................................5.1302212 Flat bar ...............................................................................................................5.1302213 Flat bar ...............................................................................................................5.1302214 Flat bar ...............................................................................................................5.1302221 Round tube ........................................................................................................5.1602222 Round tube ........................................................................................................5.1602223 Round tube ........................................................................................................5.1602240 Angle, equal-sided .............................................................................................5.1302241 Angle, equal-sided .............................................................................................5.1302242 Angle, equal-sided .............................................................................................5.1302243 Angle, equal-sided .............................................................................................5.1302244 Angle, equal-sided .............................................................................................5.1302250 Angle, unequal-sided .........................................................................................5.14

00010 Flat bar ...............................................................................................................5.0700012 Flat bar ...............................................................................................................5.0700013 Flat bar ...............................................................................................................5.0700014 Flat bar ...............................................................................................................5.0700020 Round tube ........................................................................................................5.0900021 Round tube ........................................................................................................5.0900022 Round tube ........................................................................................................5.0900023 Round tube ........................................................................................................5.0900024 Round tube ........................................................................................................5.0900025 Round tube ........................................................................................................5.0900026 Round tube ........................................................................................................5.0900027 Round tube ........................................................................................................5.0900030 Round bar ..........................................................................................................5.0900031 Round bar ..........................................................................................................5.0900032 Round bar ..........................................................................................................5.0900033 Round bar ..........................................................................................................5.0900034 Round bar ..........................................................................................................5.0900040 Angle, equal-sided .............................................................................................5.0700041 Angle, equal-sided .............................................................................................5.0700042 Angle, equal-sided .............................................................................................5.0700045 Angle, equal-sided .............................................................................................5.0700052 Angle, unequal-sided .........................................................................................5.0800053 Angle, unequal-sided .........................................................................................5.0800054 Angle, unequal-sided .........................................................................................5.0800055 Angle, unequal-sided .........................................................................................5.0800060 U-profile .............................................................................................................5.0800061 U-profile .............................................................................................................5.0800062 U-profile .............................................................................................................5.0800063 U-profile .............................................................................................................5.0800064 U-profile .............................................................................................................5.0800065 U-profile .............................................................................................................5.0800066 U-profile .............................................................................................................5.0800067 U-profile .............................................................................................................5.0800068 U-profile .............................................................................................................5.0800070 Square tube........................................................................................................5.1000071 Square tube........................................................................................................5.1000072 Square tube........................................................................................................5.1000073 Square tube........................................................................................................5.1000075 Square tube........................................................................................................5.1000090 T-profile ..............................................................................................................5.1100091 T-profile ..............................................................................................................5.1100092 T-profile ..............................................................................................................5.1100139 Guide rail profile, assembly at the top ...............................................................5.1100140 Guide rail profile, assembly below .....................................................................5.1100242 Angle, equal-sided .............................................................................................5.0700243 Angle, equal-sided .............................................................................................5.0700244 Angle, equal-sided .............................................................................................5.0700250 Angle, unequal-sided .........................................................................................5.0800251 Angle, unequal-sided .........................................................................................5.0800270 Square tube........................................................................................................5.1000401 Edge protecting profile .......................................................................................5.1200402 Edge protecting profile .......................................................................................5.1200405 Handle profile .....................................................................................................5.1200428 Rectangular tube ................................................................................................5.1000431 Ladder step profile .............................................................................................5.1201010 Flat bar ...............................................................................................................5.1301011 Flat bar ...............................................................................................................5.1301012 Flat bar ...............................................................................................................5.1301013 Flat bar ...............................................................................................................5.1301014 Flat bar ...............................................................................................................5.1301015 Flat bar ...............................................................................................................5.1301016 Flat bar ...............................................................................................................5.1301017 Flat bar ...............................................................................................................5.1301020 Round tube ........................................................................................................5.1601021 Round tube ........................................................................................................5.1601022 Round tube ........................................................................................................5.1601023 Round tube ........................................................................................................5.1601024 Round tube ........................................................................................................5.1601025 Round tube ........................................................................................................5.1601026 Round tube ........................................................................................................5.1601030 Round bar ..........................................................................................................5.1601031 Round bar ..........................................................................................................5.1601032 Round bar ..........................................................................................................5.1601033 Round bar ..........................................................................................................5.1601034 Round bar ..........................................................................................................5.1601040 Angle, equal-sided .............................................................................................5.1301041 Angle, equal-sided .............................................................................................5.1301042 Angle, equal-sided .............................................................................................5.1301043 Angle, equal-sided .............................................................................................5.1301044 Angle, equal-sided .............................................................................................5.1301045 Angle, equal-sided .............................................................................................5.1301046 Angle, equal-sided .............................................................................................5.1301050 Angle, unequal-sided .........................................................................................5.1401051 Angle, unequal-sided .........................................................................................5.1401052 Angle, unequal-sided .........................................................................................5.1401053 Angle, unequal-sided .........................................................................................5.1401054 Angle, unequal-sided .........................................................................................5.1401055 Angle, unequal-sided .........................................................................................5.14

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-7

02251 Angle, unequal-sided .........................................................................................5.1402270 Square tube........................................................................................................5.1702272 Square tube........................................................................................................5.1702273 Square tube........................................................................................................5.1703141 Frame edging profile ..........................................................................................5.2104010 Flat bar ...............................................................................................................5.0704012 Flat bar ...............................................................................................................5.0704014 Flat bar ...............................................................................................................5.0704015 Flat bar ...............................................................................................................5.0704016 Flat bar ...............................................................................................................5.0704017 Flat bar ...............................................................................................................5.0704025 Round tube ........................................................................................................5.0904026 Round tube ........................................................................................................5.0904027 Round tube ........................................................................................................5.0904028 Round tube ........................................................................................................5.0904029 Round tube ........................................................................................................5.0904031 Round bar ..........................................................................................................5.0904032 Round bar ..........................................................................................................5.0904042 Angle, equal-sided .............................................................................................5.0704043 Angle, equal-sided .............................................................................................5.0704044 Angle, equal-sided .............................................................................................5.0704045 Angle, equal-sided .............................................................................................5.0704046 Angle, equal-sided .............................................................................................5.0704047 Angle, equal-sided .............................................................................................5.0704048 Angle, equal-sided .............................................................................................5.0704051 Angle, unequal-sided .........................................................................................5.0804052 Angle, unequal-sided .........................................................................................5.0804053 Angle, unequal-sided .........................................................................................5.0804054 Angle, unequal-sided .........................................................................................5.0804055 Angle, unequal-sided .........................................................................................5.0804056 Angle, unequal-sided .........................................................................................5.0804066 U-profile .............................................................................................................5.0804067 U-profile .............................................................................................................5.0804068 U-profile .............................................................................................................5.0804069 U-profile .............................................................................................................5.0804070 Square tube........................................................................................................5.1004071 Square tube........................................................................................................5.1004074 Square tube........................................................................................................5.1004075 Square tube........................................................................................................5.1004076 Square tube........................................................................................................5.1004091 T-profile ..............................................................................................................5.1104092 T-profile ..............................................................................................................5.1104093 T-profile ..............................................................................................................5.1104135 U-profile .............................................................................................................5.0804139 Guide rail profile, assembly at the top ...............................................................5.1104140 Guide rail profile, assembly below .....................................................................5.1104210 Flat bar ...............................................................................................................5.0704212 Flat bar ...............................................................................................................5.0704213 Flat bar ...............................................................................................................5.0704214 Flat bar ...............................................................................................................5.0704215 Flat bar ...............................................................................................................5.0704216 Flat bar ...............................................................................................................5.0704217 Flat bar ...............................................................................................................5.0704221 Round tube ........................................................................................................5.0904222 Round tube ........................................................................................................5.0904223 Round tube ........................................................................................................5.0904225 Round tube ........................................................................................................5.0904226 Round tube ........................................................................................................5.0904227 Round tube ........................................................................................................5.0904228 Round tube ........................................................................................................5.0904229 Round tube ........................................................................................................5.0904231 Round bar ..........................................................................................................5.0904232 Round bar ..........................................................................................................5.0904240 Angle, equal-sided .............................................................................................5.0704241 Angle, equal-sided .............................................................................................5.0704242 Angle, equal-sided .............................................................................................5.0704243 Angle, equal-sided .............................................................................................5.0704244 Angle, equal-sided .............................................................................................5.0704245 Angle, equal-sided .............................................................................................5.0704246 Angle, equal-sided .............................................................................................5.0704247 Angle, equal-sided .............................................................................................5.0704248 Angle, equal-sided .............................................................................................5.0704250 Angle, unequal-sided .........................................................................................5.0804251 Angle, unequal-sided .........................................................................................5.0804252 Angle, unequal-sided .........................................................................................5.0804253 Angle, unequal-sided .........................................................................................5.0804254 Angle, unequal-sided .........................................................................................5.0804255 Angle, unequal-sided .........................................................................................5.0804256 Angle, unequal-sided .........................................................................................5.0804266 U-profile .............................................................................................................5.0804267 U-profile .............................................................................................................5.0804268 U-profile .............................................................................................................5.0804269 U-profile .............................................................................................................5.0804270 Square tube........................................................................................................5.1004271 Square tube........................................................................................................5.1004272 Square tube........................................................................................................5.1004273 Square tube........................................................................................................5.1004274 Square tube........................................................................................................5.10

04275 Square tube........................................................................................................5.1004276 Square tube........................................................................................................5.1004291 T-profile ..............................................................................................................5.1104293 T-profile ..............................................................................................................5.1104328 Rectangular tube ................................................................................................5.1004331 Ladder step profile .............................................................................................5.1204332 Rectangular tube ................................................................................................5.1004333 Rectangular tube ................................................................................................5.1004335 U-profile .............................................................................................................5.0804339 Guide rail profile, assembly at the top ...............................................................5.1104340 Guide rail profile, assembly below .....................................................................5.1104428 Rectangular tube ................................................................................................5.1004431 Ladder step profile .............................................................................................5.1204432 Rectangular tube ................................................................................................5.1004433 Rectangular tube ................................................................................................5.1005010 Flat bar ...............................................................................................................5.1305011 Flat bar ...............................................................................................................5.1305012 Flat bar ...............................................................................................................5.1305013 Flat bar ...............................................................................................................5.1305014 Flat bar ...............................................................................................................5.1305015 Flat bar ...............................................................................................................5.1305016 Flat bar ...............................................................................................................5.1305017 Flat bar ...............................................................................................................5.1305020 Round tube ........................................................................................................5.1605021 Round tube ........................................................................................................5.1605022 Round tube ........................................................................................................5.1605023 Round tube ........................................................................................................5.1605024 Round tube ........................................................................................................5.1605025 Round tube ........................................................................................................5.1605026 Round tube ........................................................................................................5.1605027 Round tube ........................................................................................................5.1605030 Round bar ..........................................................................................................5.1605031 Round bar ..........................................................................................................5.1605032 Round bar ..........................................................................................................5.1605033 Round bar ..........................................................................................................5.1605034 Round bar ..........................................................................................................5.1605040 Angle, equal-sided .............................................................................................5.1305041 Angle, equal-sided .............................................................................................5.1305042 Angle, equal-sided .............................................................................................5.1305043 Angle, equal-sided .............................................................................................5.1305044 Angle, equal-sided .............................................................................................5.1305045 Angle, equal-sided .............................................................................................5.1305046 Angle, equal-sided .............................................................................................5.1305050 Angle, unequal-sided .........................................................................................5.1405051 Angle, unequal-sided .........................................................................................5.1405052 Angle, unequal-sided .........................................................................................5.1405053 Angle, unequal-sided .........................................................................................5.1405054 Angle, unequal-sided .........................................................................................5.1405055 Angle, unequal-sided .........................................................................................5.1405056 Angle, unequal-sided .........................................................................................5.1405060 U-profile .............................................................................................................5.1505061 U-profile .............................................................................................................5.1505062 U-profile .............................................................................................................5.1505063 U-profile .............................................................................................................5.1505064 U-profile .............................................................................................................5.1505065 U-profile .............................................................................................................5.1505066 U-profile .............................................................................................................5.1505067 U-profile .............................................................................................................5.1505070 Square tube........................................................................................................5.1705071 Square tube........................................................................................................5.1705072 Square tube........................................................................................................5.1705073 Square tube........................................................................................................5.1705074 Square tube........................................................................................................5.1705080 Square bar .........................................................................................................5.1805081 Square bar .........................................................................................................5.1805082 Square bar .........................................................................................................5.1805090 T-profile ..............................................................................................................5.1905091 T-profile ..............................................................................................................5.1905092 T-profile ..............................................................................................................5.1905100 H-profile .............................................................................................................5.1905101 H-profile .............................................................................................................5.1905102 H-profile .............................................................................................................5.1905103 H-profile .............................................................................................................5.1905104 H-profile .............................................................................................................5.1905110 Hinge profile for Ø 6.1 mm .................................................................................5.1705115 Edge protecting profile, round ...........................................................................5.2105116 Edge protecting profile, round ...........................................................................5.2105117 Edge protecting profile, round ...........................................................................5.2105118 Edge protecting profile, round ...........................................................................5.2105139 Guide rail profile, assembly at the top ...............................................................5.1805140 Guide rail profile, assembly below .....................................................................5.1805141 Frame edging profile ..........................................................................................5.2105210 Flat bar ...............................................................................................................5.1305212 Flat bar ...............................................................................................................5.1305213 Flat bar ...............................................................................................................5.1305214 Flat bar ...............................................................................................................5.1305221 Round tube ........................................................................................................5.1605222 Round tube ........................................................................................................5.16

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-8

08273 Square tube........................................................................................................5.1708274 Square tube........................................................................................................5.1708280 Square bar .........................................................................................................5.1808281 Square bar .........................................................................................................5.1808282 Square bar .........................................................................................................5.1808290 T-profile ..............................................................................................................5.1908291 T-profile ..............................................................................................................5.1908292 T-profile ..............................................................................................................5.1908300 H-profile .............................................................................................................5.1908301 H-profile .............................................................................................................5.1908302 H-profile .............................................................................................................5.1908303 H-profile .............................................................................................................5.1908304 H-profile .............................................................................................................5.1908310 Hinge profile for Ø 6.1 mm .................................................................................5.1708339 Guide rail profile, assembly at the top ...............................................................5.1808340 Guide rail profile, assembly below .....................................................................5.1808341 Frame edging profile ..........................................................................................5.2108351 Edge protecting profile .......................................................................................5.1508352 Edge protecting profile .......................................................................................5.1508353 Handle profile .....................................................................................................5.1908354 Handle profile .....................................................................................................5.2008355 Handle profile .....................................................................................................5.2008360 Handle profile .....................................................................................................5.2008540 Angle, equal-sided .............................................................................................5.1308541 Angle, equal-sided .............................................................................................5.1308542 Angle, equal-sided .............................................................................................5.1308543 Angle, equal-sided .............................................................................................5.1311140 Angle, equal-sided .............................................................................................5.2511141 Angle, equal-sided .............................................................................................5.2511142 Angle, equal-sided .............................................................................................5.2511143 Angle, equal-sided .............................................................................................5.2511146 Angle, equal-sided .............................................................................................5.2511147 Angle, equal-sided .............................................................................................5.2511150 Angle, unequal-sided .........................................................................................5.2611151 Angle, unequal-sided .........................................................................................5.2611152 Angle, unequal-sided .........................................................................................5.2611153 Angle, unequal-sided .........................................................................................5.2611172 Frame profile ......................................................................................................5.3112140 Angle, equal-sided .............................................................................................5.2512141 Angle, equal-sided .............................................................................................5.2512142 Angle, equal-sided .............................................................................................5.2512143 Angle, equal-sided .............................................................................................5.2512146 Angle, equal-sided .............................................................................................5.2512147 Angle, equal-sided .............................................................................................5.2512150 Angle, unequal-sided .........................................................................................5.2612151 Angle, unequal-sided .........................................................................................5.2612152 Angle, unequal-sided .........................................................................................5.2612153 Angle, unequal-sided .........................................................................................5.2612154 Angle, unequal-sided .........................................................................................5.2612155 Angle, unequal-sided .........................................................................................5.2612156 Angle, unequal-sided .........................................................................................5.2612157 Angle, unequal-sided .........................................................................................5.2612160 U-profile .............................................................................................................5.2812161 U-profile .............................................................................................................5.2812162 U-profile .............................................................................................................5.2812163 U-profile .............................................................................................................5.2812164 U-profile .............................................................................................................5.2812165 Guide rail profile, assembly below .....................................................................5.2912166 Guide rail profile, assembly at the top ...............................................................5.2912170 Edge profile, two-sided ......................................................................................5.3012171 Edge profile, one-sided ......................................................................................5.3012172 Frame profile ......................................................................................................5.3112175 Angle, equal-sided .............................................................................................5.2512176 Angle, equal-sided .............................................................................................5.2512177 Angle, equal-sided .............................................................................................5.2512180 Edge protecting profile, round ...........................................................................5.3212181 Edge protecting profile, round ...........................................................................5.3212182 Edge protecting profile, round ...........................................................................5.3212183 Edge protecting profile, round ...........................................................................5.3212190 Edge protecting profile, round ...........................................................................5.3212191 Edge protecting profile, round ...........................................................................5.3212192 Edge protecting profile, round ...........................................................................5.3212193 Edge protecting profile, round ...........................................................................5.3212300 Angle, unequal-sided .........................................................................................5.2712301 Angle, unequal-sided .........................................................................................5.2712302 Angle, unequal-sided .........................................................................................5.2712303 Angle, unequal-sided .........................................................................................5.2712304 Angle, unequal-sided .........................................................................................5.2712305 Angle, unequal-sided .........................................................................................5.2712310 Angle, unequal-sided .........................................................................................5.2712311 Angle, unequal-sided .........................................................................................5.2712312 Angle, unequal-sided .........................................................................................5.2712313 Angle, unequal-sided .........................................................................................5.2712314 Angle, unequal-sided .........................................................................................5.2712315 Angle, unequal-sided .........................................................................................5.2712320 Angle, unequal-sided .........................................................................................5.2712321 Angle, unequal-sided .........................................................................................5.2712322 Angle, unequal-sided .........................................................................................5.27

05223 Round tube ........................................................................................................5.1605240 Angle, equal-sided .............................................................................................5.1305241 Angle, equal-sided .............................................................................................5.1305242 Angle, equal-sided .............................................................................................5.1305243 Angle, equal-sided .............................................................................................5.1305244 Angle, equal-sided .............................................................................................5.1305250 Angle, unequal-sided .........................................................................................5.1405251 Angle, unequal-sided .........................................................................................5.1405270 Square tube........................................................................................................5.1705272 Square tube........................................................................................................5.1705273 Square tube........................................................................................................5.1705315 Edge protecting profile, round ...........................................................................5.2105316 Edge protecting profile, round ...........................................................................5.2105317 Edge protecting profile, round ...........................................................................5.2105318 Edge protecting profile, round ...........................................................................5.2105401 Edge protecting profile .......................................................................................5.1505402 Edge protecting profile .......................................................................................5.1505403 Handle profile .....................................................................................................5.1905404 Handle profile .....................................................................................................5.2005405 Handle profile .....................................................................................................5.2005410 Handle profile .....................................................................................................5.2006040 Angle, equal-sided .............................................................................................5.1306041 Angle, equal-sided .............................................................................................5.1306042 Angle, equal-sided .............................................................................................5.1306043 Angle, equal-sided .............................................................................................5.1306210 Flat bar ...............................................................................................................5.1306212 Flat bar ...............................................................................................................5.1306213 Flat bar ...............................................................................................................5.1306214 Flat bar ...............................................................................................................5.1306221 Round tube ........................................................................................................5.1606222 Round tube ........................................................................................................5.1606223 Round tube ........................................................................................................5.1606240 Angle, equal-sided .............................................................................................5.1306241 Angle, equal-sided .............................................................................................5.1306242 Angle, equal-sided .............................................................................................5.1306243 Angle, equal-sided .............................................................................................5.1306244 Angle, equal-sided .............................................................................................5.1306250 Angle, unequal-sided .........................................................................................5.1406251 Angle, unequal-sided .........................................................................................5.1406270 Square tube........................................................................................................5.1706272 Square tube........................................................................................................5.1706273 Square tube........................................................................................................5.1707141 Frame edging profile ..........................................................................................5.2108210 Flat bar ...............................................................................................................5.1308211 Flat bar ...............................................................................................................5.1308212 Flat bar ...............................................................................................................5.1308213 Flat bar ...............................................................................................................5.1308214 Flat bar ...............................................................................................................5.1308215 Flat bar ...............................................................................................................5.1308216 Flat bar ...............................................................................................................5.1308217 Flat bar ...............................................................................................................5.1308220 Round tube ........................................................................................................5.1608221 Round tube ........................................................................................................5.1608222 Round tube ........................................................................................................5.1608223 Round tube ........................................................................................................5.1608224 Round tube ........................................................................................................5.1608225 Round tube ........................................................................................................5.1608226 Round tube ........................................................................................................5.1608227 Round tube ........................................................................................................5.1608230 Round bar ..........................................................................................................5.1608231 Round bar ..........................................................................................................5.1608232 Round bar ..........................................................................................................5.1608233 Round bar ..........................................................................................................5.1608234 Round bar ..........................................................................................................5.1608240 Angle, equal-sided .............................................................................................5.1308241 Angle, equal-sided .............................................................................................5.1308242 Angle, equal-sided .............................................................................................5.1308243 Angle, equal-sided .............................................................................................5.1308244 Angle, equal-sided .............................................................................................5.1308245 Angle, equal-sided .............................................................................................5.1308250 Angle, unequal-sided .........................................................................................5.1408251 Angle, unequal-sided .........................................................................................5.1408252 Angle, unequal-sided .........................................................................................5.1408253 Angle, unequal-sided .........................................................................................5.1408254 Angle, unequal-sided .........................................................................................5.1408255 Angle, unequal-sided .........................................................................................5.1408256 Angle, unequal-sided .........................................................................................5.1408260 U-profile .............................................................................................................5.1508261 U-profile .............................................................................................................5.1508262 U-profile .............................................................................................................5.1508263 U-profile .............................................................................................................5.1508264 U-profile .............................................................................................................5.1508265 U-profile .............................................................................................................5.1508266 U-profile .............................................................................................................5.1508267 U-profile .............................................................................................................5.1508270 Square tube........................................................................................................5.1708271 Square tube........................................................................................................5.1708272 Square tube........................................................................................................5.17

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-9

12323 Angle, unequal-sided .........................................................................................5.2712324 Angle, unequal-sided .........................................................................................5.2712325 Angle, unequal-sided .........................................................................................5.2712330 Angle, unequal-sided .........................................................................................5.2712331 Angle, unequal-sided .........................................................................................5.2712332 Angle, unequal-sided .........................................................................................5.2712333 Angle, unequal-sided .........................................................................................5.2712334 Angle, unequal-sided .........................................................................................5.2712335 Angle, unequal-sided .........................................................................................5.2712340 Angle, unequal-sided .........................................................................................5.2712341 Angle, unequal-sided .........................................................................................5.2712342 Angle, unequal-sided .........................................................................................5.2712343 Angle, unequal-sided .........................................................................................5.2712344 Angle, unequal-sided .........................................................................................5.2712345 Angle, unequal-sided .........................................................................................5.2712350 Angle, unequal-sided .........................................................................................5.2712351 Angle, unequal-sided .........................................................................................5.2712352 Angle, unequal-sided .........................................................................................5.2712353 Angle, unequal-sided .........................................................................................5.2712354 Angle, unequal-sided .........................................................................................5.2712355 Angle, unequal-sided .........................................................................................5.2712360 Angle, unequal-sided .........................................................................................5.2712361 Angle, unequal-sided .........................................................................................5.2712362 Angle, unequal-sided .........................................................................................5.2712363 Angle, unequal-sided .........................................................................................5.2712364 Angle, unequal-sided .........................................................................................5.2712365 Angle, unequal-sided .........................................................................................5.2712370 Angle, unequal-sided .........................................................................................5.2712371 Angle, unequal-sided .........................................................................................5.2712372 Angle, unequal-sided .........................................................................................5.2712373 Angle, unequal-sided .........................................................................................5.2712374 Angle, unequal-sided .........................................................................................5.2712375 Angle, unequal-sided .........................................................................................5.2712600 Bracket, equal-sided, self-adhesive...................................................................5.3312601 Bracket, equal-sided, self-adhesive...................................................................5.3312602 Bracket, equal-sided, self-adhesive...................................................................5.3312610 Bracket, equal-sided, self-adhesive...................................................................5.3512611 Bracket, equal-sided, self-adhesive...................................................................5.3512612 Bracket, equal-sided, self-adhesive...................................................................5.3512613 Bracket, equal-sided, self-adhesive...................................................................5.3512614 Bracket, equal-sided, self-adhesive...................................................................5.3512615 Bracket, equal-sided, self-adhesive...................................................................5.3412616 Bracket, equal-sided, self-adhesive...................................................................5.3512617 Bracket, equal-sided, self-adhesive...................................................................5.3512618 Bracket, equal-sided, self-adhesive...................................................................5.3512619 Bracket, equal-sided, self-adhesive...................................................................5.3512620 Bracket, equal-sided, self-adhesive...................................................................5.3512621 Corner bar, self-adhesive ...................................................................................5.3412622 Quarter circle corner bar, self-adhesive .............................................................5.3312623 Quarter circle corner bar, self-adhesive .............................................................5.3312624 Bracket, equal-sided, self-adhesive...................................................................5.3412625 Bracket, equal-sided, self-adhesive...................................................................5.3512626 Bracket, equal-sided, self-adhesive...................................................................5.3412627 Bracket, equal-sided, self-adhesive...................................................................5.3512630 Bracket, equal-sided, self-adhesive...................................................................5.3412631 Bracket, equal-sided, self-adhesive...................................................................5.3412632 Bracket, equal-sided, self-adhesive...................................................................5.3512634 Bracket, equal-sided, self-adhesive...................................................................5.3512635 Bracket, equal-sided, self-adhesive...................................................................5.3512636 Bracket, equal-sided, self-adhesive...................................................................5.3512637 Bracket, equal-sided, self-adhesive...................................................................5.3512638 Bracket, equal-sided, self-adhesive...................................................................5.3412639 Bracket, equal-sided, self-adhesive...................................................................5.3412640 Bracket, equal-sided, self-adhesive...................................................................5.3412670 Bracket, equal-sided, self-adhesive...................................................................5.3512671 Bracket, equal-sided, self-adhesive...................................................................5.3512672 Bracket, equal-sided, self-adhesive...................................................................5.3512673 Bracket, equal-sided, self-adhesive...................................................................5.3512674 Bracket, equal-sided, self-adhesive...................................................................5.3512675 Bracket, equal-sided, self-adhesive...................................................................5.3512676 Bracket, equal-sided, self-adhesive...................................................................5.3512677 Bracket, equal-sided, self-adhesive...................................................................5.3512678 Bracket, equal-sided, self-adhesive...................................................................5.3512679 Bracket, equal-sided, self-adhesive...................................................................5.3512715 Angle, equal-sided .............................................................................................5.2412724 Angle, equal-sided .............................................................................................5.2412726 Angle, equal-sided .............................................................................................5.2412727 Angle, equal-sided .............................................................................................5.2512730 Angle, equal-sided .............................................................................................5.2412731 Angle, equal-sided .............................................................................................5.2412738 Angle, equal-sided .............................................................................................5.2412739 Angle, equal-sided .............................................................................................5.2412740 Angle, equal-sided .............................................................................................5.2412988 Edge profile, two-sided ......................................................................................5.3012989 Angle, equal-sided .............................................................................................5.2412991 Angle, equal-sided .............................................................................................5.2412993 Frame profile ......................................................................................................5.3112994 Edge profile, one-sided ......................................................................................5.29

12995 Angle, unequal-sided .........................................................................................5.2612996 Angle, unequal-sided .........................................................................................5.2612997 Angle, equal-sided .............................................................................................5.2412998 Angle, equal-sided .............................................................................................5.2415140 Angle, equal-sided .............................................................................................5.2515141 Angle, equal-sided .............................................................................................5.2515142 Angle, equal-sided .............................................................................................5.2515143 Angle, equal-sided .............................................................................................5.2515146 Angle, equal-sided .............................................................................................5.2515147 Angle, equal-sided .............................................................................................5.2515150 Angle, unequal-sided .........................................................................................5.2615151 Angle, unequal-sided .........................................................................................5.2615152 Angle, unequal-sided .........................................................................................5.2615153 Angle, unequal-sided .........................................................................................5.2615158 Angle, equal-sided .............................................................................................5.2515159 Angle, equal-sided .............................................................................................5.2515172 Frame profile ......................................................................................................5.3116140 Angle, equal-sided .............................................................................................5.2516141 Angle, equal-sided .............................................................................................5.2516142 Angle, equal-sided .............................................................................................5.2516143 Angle, equal-sided .............................................................................................5.2516146 Angle, equal-sided .............................................................................................5.2516147 Angle, equal-sided .............................................................................................5.2516150 Angle, unequal-sided .........................................................................................5.2616151 Angle, unequal-sided .........................................................................................5.2616152 Angle, unequal-sided .........................................................................................5.2616153 Angle, unequal-sided .........................................................................................5.2616154 Angle, unequal-sided .........................................................................................5.2616155 Angle, unequal-sided .........................................................................................5.2616156 Angle, unequal-sided .........................................................................................5.2616157 Angle, unequal-sided .........................................................................................5.2616160 U-profile .............................................................................................................5.2816161 U-profile .............................................................................................................5.2816162 U-profile .............................................................................................................5.2816163 U-profile .............................................................................................................5.2816164 U-profile .............................................................................................................5.2816165 Guide rail profile, assembly below .....................................................................5.2916166 Guide rail profile, assembly at the top ...............................................................5.2916172 Frame profile ......................................................................................................5.3116175 Angle, equal-sided .............................................................................................5.2516176 Angle, equal-sided .............................................................................................5.2516177 Angle, equal-sided .............................................................................................5.2516180 Edge protecting profile, round ...........................................................................5.3216181 Edge protecting profile, round ...........................................................................5.3216182 Edge protecting profile, round ...........................................................................5.3216183 Edge protecting profile, round ...........................................................................5.3216190 Edge protecting profile, round ...........................................................................5.3216191 Edge protecting profile, round ...........................................................................5.3216192 Edge protecting profile, round ...........................................................................5.3216193 Edge protecting profile, round ...........................................................................5.3216300 Angle, unequal-sided .........................................................................................5.2716301 Angle, unequal-sided .........................................................................................5.2716302 Angle, unequal-sided .........................................................................................5.2716303 Angle, unequal-sided .........................................................................................5.2716304 Angle, unequal-sided .........................................................................................5.2716305 Angle, unequal-sided .........................................................................................5.2716310 Angle, unequal-sided .........................................................................................5.2716311 Angle, unequal-sided .........................................................................................5.2716312 Angle, unequal-sided .........................................................................................5.2716313 Angle, unequal-sided .........................................................................................5.2716314 Angle, unequal-sided .........................................................................................5.2716315 Angle, unequal-sided .........................................................................................5.2716320 Angle, unequal-sided .........................................................................................5.2716321 Angle, unequal-sided .........................................................................................5.2716322 Angle, unequal-sided .........................................................................................5.2716323 Angle, unequal-sided .........................................................................................5.2716324 Angle, unequal-sided .........................................................................................5.2716325 Angle, unequal-sided .........................................................................................5.2716330 Angle, unequal-sided .........................................................................................5.2716331 Angle, unequal-sided .........................................................................................5.2716332 Angle, unequal-sided .........................................................................................5.2716333 Angle, unequal-sided .........................................................................................5.2716334 Angle, unequal-sided .........................................................................................5.2716335 Angle, unequal-sided .........................................................................................5.2716340 Angle, unequal-sided .........................................................................................5.2716341 Angle, unequal-sided .........................................................................................5.2716342 Angle, unequal-sided .........................................................................................5.2716343 Angle, unequal-sided .........................................................................................5.2716344 Angle, unequal-sided .........................................................................................5.2716345 Angle, unequal-sided .........................................................................................5.2716350 Angle, unequal-sided .........................................................................................5.2716351 Angle, unequal-sided .........................................................................................5.2716352 Angle, unequal-sided .........................................................................................5.2716353 Angle, unequal-sided .........................................................................................5.2716354 Angle, unequal-sided .........................................................................................5.2716355 Angle, unequal-sided .........................................................................................5.2716360 Angle, unequal-sided .........................................................................................5.2716361 Angle, unequal-sided .........................................................................................5.27

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-10

16731 Angle, equal-sided .............................................................................................5.2416732 Angle, equal-sided .............................................................................................5.2516738 Angle, equal-sided .............................................................................................5.2416739 Angle, equal-sided .............................................................................................5.2416740 Angle, equal-sided .............................................................................................5.2416750 Combi-bracket, equal-sided, self-adhesive .......................................................5.3416988 Edge profile, two-sided ......................................................................................5.3016989 Angle, equal-sided .............................................................................................5.2416991 Angle, equal-sided .............................................................................................5.2416993 Frame profile ......................................................................................................5.3116994 Edge profile, one-sided ......................................................................................5.2916995 Angle, unequal-sided .........................................................................................5.2616996 Angle, unequal-sided .........................................................................................5.2616997 Angle, equal-sided .............................................................................................5.2416998 Angle, equal-sided .............................................................................................5.2416999 Angle, equal-sided .............................................................................................5.2518001 clampline angle profile .......................................................................................5.3618002 clampline angle profile .......................................................................................5.3618003 clampline angle profile .......................................................................................5.3618004 clampline angle profile .......................................................................................5.3618011 clampline angle profile .......................................................................................5.3618012 clampline angle profile .......................................................................................5.3618013 clampline angle profile .......................................................................................5.3618014 clampline angle profile .......................................................................................5.3618021 clampline U-profile .............................................................................................5.3618022 clampline U-profile .............................................................................................5.3618023 clampline U-profile .............................................................................................5.3618024 clampline U-profile .............................................................................................5.3618025 clampline U-profile .............................................................................................5.3618026 clampline U-profile .............................................................................................5.3618027 clampline U-profile .............................................................................................5.3618031 clampline U-profile .............................................................................................5.3618032 clampline U-profile .............................................................................................5.3618033 clampline U-profile .............................................................................................5.3618034 clampline U-profile .............................................................................................5.3618035 clampline U-profile .............................................................................................5.3618036 clampline U-profile .............................................................................................5.3618037 clampline U-profile .............................................................................................5.3618041 clampline H-profile .............................................................................................5.3718042 clampline H-profile .............................................................................................5.3718043 clampline H-profile .............................................................................................5.3718044 clampline H-profile .............................................................................................5.3718045 clampline H-profile .............................................................................................5.3718046 clampline H-profile .............................................................................................5.3718047 clampline H-profile .............................................................................................5.3718051 clampline H-profile .............................................................................................5.3718052 clampline H-profile .............................................................................................5.3718053 clampline H-profile .............................................................................................5.3718054 clampline H-profile .............................................................................................5.3718055 clampline H-profile .............................................................................................5.3718056 clampline H-profile .............................................................................................5.3718057 clampline H-profile .............................................................................................5.3718061 clampline corner profile ......................................................................................5.3718062 clampline corner profile ......................................................................................5.3718063 clampline corner profile ......................................................................................5.3718064 clampline corner profile ......................................................................................5.3718065 clampline corner profile ......................................................................................5.3718066 clampline corner profile ......................................................................................5.3718067 clampline corner profile ......................................................................................5.3718071 clampline corner profile ......................................................................................5.3718072 clampline corner profile ......................................................................................5.3718073 clampline corner profile ......................................................................................5.3718074 clampline corner profile ......................................................................................5.3718075 clampline corner profile ......................................................................................5.3718076 clampline corner profile ......................................................................................5.3718077 clampline corner profile ......................................................................................5.3718085 clampline T-profile .............................................................................................5.3618095 clampline T-profile .............................................................................................5.3618125 clampline hinge profile .......................................................................................5.3818135 clampline hinge profile .......................................................................................5.3818641 clampsoft angle profile .......................................................................................5.3918642 clampsoft angle profile .......................................................................................5.3918643 clampsoft angle profile .......................................................................................5.3918644 clampsoft angle profile .......................................................................................5.3918645 clampsoft angle profile .......................................................................................5.3918646 clampsoft angle profile .......................................................................................5.3918647 clampsoft angle profile .......................................................................................5.3918651 clampsoft angle profile .......................................................................................5.3918652 clampsoft angle profile .......................................................................................5.3918653 clampsoft angle profile .......................................................................................5.3918654 clampsoft angle profile .......................................................................................5.3918655 clampsoft angle profile .......................................................................................5.3918656 clampsoft angle profile .......................................................................................5.3918657 clampsoft angle profile .......................................................................................5.3918661 clampsoft U-profile ............................................................................................5.4018662 clampsoft U-profile ............................................................................................5.4018663 clampsoft U-profile ............................................................................................5.4018664 clampsoft U-profile ............................................................................................5.40

16362 Angle, unequal-sided .........................................................................................5.2716363 Angle, unequal-sided .........................................................................................5.2716364 Angle, unequal-sided .........................................................................................5.2716365 Angle, unequal-sided .........................................................................................5.2716370 Angle, unequal-sided .........................................................................................5.2716371 Angle, unequal-sided .........................................................................................5.2716372 Angle, unequal-sided .........................................................................................5.2716373 Angle, unequal-sided .........................................................................................5.2716374 Angle, unequal-sided .........................................................................................5.2716375 Angle, unequal-sided .........................................................................................5.2716450 Angle, equal-sided .............................................................................................5.2516456 Angle, equal-sided .............................................................................................5.2516457 Flat bar ...............................................................................................................5.2416458 Flat bar ...............................................................................................................5.2416459 Flat bar ...............................................................................................................5.2416460 Flat bar ...............................................................................................................5.2416465 Angle, equal-sided .............................................................................................5.2516466 Angle, equal-sided .............................................................................................5.2516467 Flat bar ...............................................................................................................5.2416468 Flat bar ...............................................................................................................5.2416469 Flat bar ...............................................................................................................5.2416470 Angle, equal-sided .............................................................................................5.1316480 Angle, equal-sided .............................................................................................5.2516481 Angle, equal-sided .............................................................................................5.2516482 Angle, equal-sided .............................................................................................5.2516483 Angle, equal-sided .............................................................................................5.2516484 Angle, unequal-sided .........................................................................................5.2616485 Angle, unequal-sided .........................................................................................5.2616486 Angle, unequal-sided .........................................................................................5.2616487 Angle, unequal-sided .........................................................................................5.2616490 Quarter circle corner bar ....................................................................................5.3116491 Quarter circle corner bar ....................................................................................5.3116492 Quarter circle corner bar ....................................................................................5.3116493 Quarter circle corner bar ....................................................................................5.3116494 Corner bar ..........................................................................................................5.3216573 Angle, equal-sided .............................................................................................5.2516574 Angle, equal-sided .............................................................................................5.2516575 Angle, equal-sided .............................................................................................5.2516576 Angle, equal-sided .............................................................................................5.2516577 Angle, equal-sided .............................................................................................5.2516600 Bracket, equal-sided, self-adhesive...................................................................5.3316601 Bracket, equal-sided, self-adhesive...................................................................5.3316602 Bracket, equal-sided, self-adhesive...................................................................5.3316610 Bracket, equal-sided, self-adhesive...................................................................5.3516611 Bracket, equal-sided, self-adhesive...................................................................5.3516612 Bracket, equal-sided, self-adhesive...................................................................5.3516613 Bracket, equal-sided, self-adhesive...................................................................5.3516614 Bracket, equal-sided, self-adhesive...................................................................5.3516615 Bracket, equal-sided, self-adhesive...................................................................5.3416616 Bracket, equal-sided, self-adhesive...................................................................5.3516617 Bracket, equal-sided, self-adhesive...................................................................5.3516618 Bracket, equal-sided, self-adhesive...................................................................5.3516619 Bracket, equal-sided, self-adhesive...................................................................5.3516620 Bracket, equal-sided, self-adhesive...................................................................5.3516621 Corner bar, self-adhesive ...................................................................................5.3416622 Quarter circle corner bar, self-adhesive .............................................................5.3316623 Quarter circle corner bar, self-adhesive .............................................................5.3316624 Bracket, equal-sided, self-adhesive...................................................................5.3416625 Bracket, equal-sided, self-adhesive...................................................................5.3516626 Bracket, equal-sided, self-adhesive...................................................................5.3416627 Bracket, equal-sided, self-adhesive...................................................................5.3516630 Bracket, equal-sided, self-adhesive...................................................................5.3416631 Bracket, equal-sided, self-adhesive...................................................................5.3416632 Bracket, equal-sided, self-adhesive...................................................................5.3516634 Bracket, equal-sided, self-adhesive...................................................................5.3516638 Bracket, equal-sided, self-adhesive...................................................................5.3416639 Bracket, equal-sided, self-adhesive...................................................................5.3416640 Bracket, equal-sided, self-adhesive...................................................................5.3416670 Bracket, equal-sided, self-adhesive...................................................................5.3516671 Bracket, equal-sided, self-adhesive...................................................................5.3516672 Bracket, equal-sided, self-adhesive...................................................................5.3516673 Bracket, equal-sided, self-adhesive...................................................................5.3516674 Bracket, equal-sided, self-adhesive...................................................................5.3516675 Bracket, equal-sided, self-adhesive...................................................................5.3516676 Bracket, equal-sided, self-adhesive...................................................................5.3516677 Bracket, equal-sided, self-adhesive...................................................................5.3516678 Bracket, equal-sided, self-adhesive...................................................................5.3516679 Bracket, equal-sided, self-adhesive...................................................................5.3516715 Angle, equal-sided .............................................................................................5.2416716 Angle, equal-sided .............................................................................................5.2516717 Angle, equal-sided .............................................................................................5.2516718 Angle, equal-sided .............................................................................................5.2516719 Angle, equal-sided .............................................................................................5.2516720 Angle, equal-sided .............................................................................................5.2516724 Angle, equal-sided .............................................................................................5.2416726 Angle, equal-sided .............................................................................................5.2416727 Angle, equal-sided .............................................................................................5.2516730 Angle, equal-sided .............................................................................................5.24

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-11

18665 clampsoft U-profile ............................................................................................5.4018666 clampsoft U-profile ............................................................................................5.4018667 clampsoft U-profile ............................................................................................5.4018671 clampsoft U-profile ............................................................................................5.4018672 clampsoft U-profile ............................................................................................5.4018673 clampsoft U-profile ............................................................................................5.4018674 clampsoft U-profile ............................................................................................5.4018675 clampsoft U-profile ............................................................................................5.4018676 clampsoft U-profile ............................................................................................5.4018677 clampsoft U-profile ............................................................................................5.4018684 clampsoft corner profile .....................................................................................5.4118685 clampsoft corner profile .....................................................................................5.4118686 clampsoft corner profile .....................................................................................5.4118687 clampsoft corner profile .....................................................................................5.4118694 clampsoft corner profile .....................................................................................5.4118695 clampsoft corner profile .....................................................................................5.4118696 clampsoft corner profile .....................................................................................5.4118697 clampsoft corner profile .....................................................................................5.4118973 clampsoft corner for corner profile ....................................................................5.4118974 clampsoft corner for corner profile ....................................................................5.4118975 clampsoft corner for corner profile ....................................................................5.4118976 clampsoft corner for corner profile ....................................................................5.4118980 clampsoft corner for U-profile ............................................................................5.4018981 clampsoft corner for U-profile ............................................................................5.4018982 clampsoft corner for U-profile ............................................................................5.4018983 clampsoft corner for U-profile ............................................................................5.4018984 clampsoft corner for U-profile ............................................................................5.4018985 clampsoft corner for U-profile ............................................................................5.4018986 clampsoft corner for U-profile ............................................................................5.4018990 clampsoft corner for angle profile ......................................................................5.3918991 clampsoft corner for angle profile ......................................................................5.3918992 clampsoft corner for angle profile ......................................................................5.3918993 clampsoft corner for angle profile ......................................................................5.3918994 clampsoft corner for angle profile ......................................................................5.3918995 clampsoft corner for angle profile ......................................................................5.3918996 clampsoft corner for angle profile ......................................................................5.3920210 Flat bar ...............................................................................................................5.2220211 Flat bar ...............................................................................................................5.2220212 Flat bar ...............................................................................................................5.2220213 Flat bar ...............................................................................................................5.2220220 Round tube ........................................................................................................5.2220221 Round tube ........................................................................................................5.2220222 Round tube ........................................................................................................5.2220223 Round tube ........................................................................................................5.2220224 Round tube ........................................................................................................5.2220230 Round bar ..........................................................................................................5.2320231 Round bar ..........................................................................................................5.2320232 Round bar ..........................................................................................................5.2320233 Round bar ..........................................................................................................5.2320234 Round bar ..........................................................................................................5.2320235 Round bar ..........................................................................................................5.2320236 Round bar ..........................................................................................................5.2320240 Angle, equal-sided .............................................................................................5.2220241 Angle, equal-sided .............................................................................................5.2220242 Angle, equal-sided .............................................................................................5.2220243 Angle, equal-sided .............................................................................................5.2220280 Square bar .........................................................................................................5.2320281 Square bar .........................................................................................................5.2320282 Square bar .........................................................................................................5.2321042 Round tube ........................................................................................................1.2421044 Round tube ........................................................................................................1.2421046 Round tube ........................................................................................................1.2421048 Round tube ........................................................................................................1.2421050 Round tube ........................................................................................................1.2421052 Round tube ........................................................................................................1.2421054 Round tube ........................................................................................................1.2421062 Round tube ........................................................................................................1.2421064 Round tube ........................................................................................................1.2421066 Round tube ........................................................................................................1.2421068 Round tube ........................................................................................................1.2421070 Round tube ........................................................................................................1.2421072 Round tube ........................................................................................................1.2421122 Round bar ..........................................................................................................1.2421124 Round bar ..........................................................................................................1.2421126 Round bar ..........................................................................................................1.2421128 Round bar ..........................................................................................................1.2421142 Round bar ..........................................................................................................1.2421164 Square tube........................................................................................................1.0821166 Square tube........................................................................................................1.0821168 Square tube........................................................................................................1.0821170 Square tube........................................................................................................1.0821170 Square tube........................................................................................................2.1321184 Square tube........................................................................................................1.0821186 Square tube........................................................................................................1.0821188 Square tube........................................................................................................1.0821190 Square tube........................................................................................................1.0821190 Square tube........................................................................................................2.1321202 Square tube........................................................................................................1.25

21204 Square tube........................................................................................................1.2521206 Square tube........................................................................................................1.2521208 Square tube........................................................................................................1.2521210 Square tube........................................................................................................1.2521210 Square tube........................................................................................................2.1821212 Square tube........................................................................................................1.2521214 Square tube........................................................................................................1.2521222 Square tube........................................................................................................1.2521224 Square tube........................................................................................................1.2521226 Square tube........................................................................................................1.2521228 Square tube........................................................................................................1.2521230 Square tube........................................................................................................1.2521230 Square tube........................................................................................................2.1821232 Square tube........................................................................................................1.2521234 Square tube........................................................................................................1.2521282 Square rod .........................................................................................................1.2421284 Square rod .........................................................................................................1.2421286 Square rod .........................................................................................................1.2421302 Square rod .........................................................................................................1.2421304 Square rod .........................................................................................................1.2421306 Square rod .........................................................................................................1.2421362 Rectangular tube ................................................................................................1.2521364 Rectangular tube ................................................................................................1.2521366 Rectangular tube ................................................................................................1.2521368 Rectangular tube ................................................................................................1.2521370 Rectangular tube ................................................................................................1.2521382 Rectangular tube ................................................................................................1.2521384 Rectangular tube ................................................................................................1.2521386 Rectangular tube ................................................................................................1.2521388 Rectangular tube ................................................................................................1.2521390 Rectangular tube ................................................................................................1.2521402 Square U ............................................................................................................1.1021404 Square U ............................................................................................................1.1021406 Square U ............................................................................................................1.1021410 Square U ............................................................................................................1.1021410 Square U ............................................................................................................2.1421422 Square U ............................................................................................................1.1021424 Square U ............................................................................................................1.1021426 Square U ............................................................................................................1.1021430 Square U ............................................................................................................1.1021430 Square U ............................................................................................................2.1421442 Square U ............................................................................................................1.2621442 Square U ............................................................................................................3.3721444 Square U ............................................................................................................1.2621444 Square U ............................................................................................................3.3721446 Square U ............................................................................................................1.2621448 Square U ............................................................................................................1.2621450 Square U ............................................................................................................1.2621450 Square U ............................................................................................................2.1821452 Square U ............................................................................................................1.2621454 Square U ............................................................................................................1.2621462 Square U ............................................................................................................1.2621462 Square U ............................................................................................................3.3721464 Square U ............................................................................................................1.2621464 Square U ............................................................................................................3.3721466 Square U ............................................................................................................1.2621468 Square U ............................................................................................................1.2621470 Square U ............................................................................................................1.2621470 Square U ............................................................................................................2.1821472 Square U ............................................................................................................1.2621474 Square U ............................................................................................................1.2621484 Rectangular U ....................................................................................................1.1121486 Rectangular U ....................................................................................................1.1121488 Rectangular U ....................................................................................................1.1121504 Rectangular U ....................................................................................................1.1121506 Rectangular U ....................................................................................................1.1121508 Rectangular U ....................................................................................................1.1121522 Rectangular U ....................................................................................................1.2621524 Rectangular U ....................................................................................................1.2621526 Rectangular U ....................................................................................................1.2621528 Rectangular U ....................................................................................................1.2621530 Rectangular U ....................................................................................................1.2621532 Rectangular U ....................................................................................................1.2621534 Rectangular U ....................................................................................................1.2621542 Rectangular U ....................................................................................................1.2621544 Rectangular U ....................................................................................................1.2621546 Rectangular U ....................................................................................................1.2621548 Rectangular U ....................................................................................................1.2621550 Rectangular U ....................................................................................................1.2621552 Rectangular U ....................................................................................................1.2621554 Rectangular U ....................................................................................................1.2621566 Angle, equal-sided .............................................................................................1.1221568 Angle, equal-sided .............................................................................................1.1221570 Angle, equal-sided .............................................................................................1.1221572 Angle, equal-sided .............................................................................................1.1221586 Angle, equal-sided .............................................................................................1.1221588 Angle, equal-sided .............................................................................................1.1221590 Angle, equal-sided .............................................................................................1.12

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-12

23056 Square tube, slotted...........................................................................................4.0523061 Angle, equal-sided, slotted ................................................................................4.0723062 Angle, unequal-sided, slotted ............................................................................4.0723063 Flat bar, slotted ..................................................................................................4.0523066 Square tube, slotted...........................................................................................4.0523101 Angle, equal-sided, slotted ................................................................................4.0723102 Angle, unequal-sided, slotted ............................................................................4.0723103 Flat bar, slotted ..................................................................................................4.0523104 U-profile, slotted ................................................................................................4.0623105 T-profile, slotted .................................................................................................4.0823106 Square tube, slotted...........................................................................................4.0523111 Angle, equal-sided, slotted ................................................................................4.0723112 Angle, unequal-sided, slotted ............................................................................4.0723113 Flat bar, slotted ..................................................................................................4.0523116 Square tube, slotted...........................................................................................4.0523151 Angle, equal-sided, slotted ................................................................................4.0723152 Angle, unequal-sided, slotted ............................................................................4.0823153 Flat bar, slotted ..................................................................................................4.0523154 U-profile, slotted ................................................................................................4.0623155 T-profile, slotted .................................................................................................4.0823156 Square tube, slotted...........................................................................................4.0623161 Angle, equal-sided, slotted ................................................................................4.0723162 Angle, unequal-sided, slotted ............................................................................4.0823163 Flat bar, slotted ..................................................................................................4.0523166 Square tube, slotted...........................................................................................4.0623171 Angle, equal-sided, slotted ................................................................................4.0723181 Angle, equal-sided, slotted ................................................................................4.0723201 Angle, equal-sided, slotted ................................................................................4.0723211 Angle, equal-sided, slotted ................................................................................4.0723251 Angle, equal-sided, slotted ................................................................................4.0723252 Angle, unequal-sided, slotted ............................................................................4.0823253 Flat bar, slotted ..................................................................................................4.0523254 U-profile, slotted ................................................................................................4.0623255 T-profile, slotted .................................................................................................4.0823256 Square tube, slotted...........................................................................................4.0623261 Angle, equal-sided, slotted ................................................................................4.0723262 Angle, unequal-sided, slotted ............................................................................4.0823263 Flat bar, slotted ..................................................................................................4.0523266 Square tube, slotted...........................................................................................4.0623321 Angle, equal-sided, slotted ................................................................................4.0723331 Angle, equal-sided, slotted ................................................................................4.0725002 Round tube ........................................................................................................1.0725004 Round tube ........................................................................................................1.0725006 Round tube ........................................................................................................1.0725008 Round tube ........................................................................................................1.0725010 Round tube ........................................................................................................1.0725012 Round tube ........................................................................................................1.0725014 Round tube ........................................................................................................1.0725022 Round tube ........................................................................................................1.0725024 Round tube ........................................................................................................1.0725026 Round tube ........................................................................................................1.0725028 Round tube ........................................................................................................1.0725030 Round tube ........................................................................................................1.0725032 Round tube ........................................................................................................1.0725034 Round tube ........................................................................................................1.0725082 Round bar ..........................................................................................................1.0725084 Round bar ..........................................................................................................1.0725086 Round bar ..........................................................................................................1.0725088 Round bar ..........................................................................................................1.0725102 Round bar ..........................................................................................................1.0725104 Round bar ..........................................................................................................1.0725106 Round bar ..........................................................................................................1.0725108 Round bar ..........................................................................................................1.0725162 Square tube........................................................................................................1.0825164 Square tube........................................................................................................1.0825166 Square tube........................................................................................................1.0825168 Square tube........................................................................................................1.0825170 Square tube........................................................................................................1.0825170 Square tube........................................................................................................2.1325171 Square tube........................................................................................................1.0825171 Square tube........................................................................................................2.1325172 Square tube........................................................................................................1.0825174 Square tube........................................................................................................1.0825182 Square tube........................................................................................................1.0825184 Square tube........................................................................................................1.0825186 Square tube........................................................................................................1.0825188 Square tube........................................................................................................1.0825190 Square tube........................................................................................................1.0825190 Square tube........................................................................................................2.1325191 Square tube........................................................................................................1.0825191 Square tube........................................................................................................2.1325192 Square tube........................................................................................................1.0825194 Square tube........................................................................................................1.0825210 Square tube........................................................................................................2.1825230 Square tube........................................................................................................2.1825242 Square rod .........................................................................................................1.0925244 Square rod .........................................................................................................1.0925246 Square rod .........................................................................................................1.09

21592 Angle, equal-sided .............................................................................................1.1221602 Angle, equal-sided .............................................................................................1.2721604 Angle, equal-sided .............................................................................................1.2721606 Angle, equal-sided .............................................................................................1.2721608 Angle, equal-sided .............................................................................................1.2721610 Angle, equal-sided .............................................................................................1.2721612 Angle, equal-sided .............................................................................................1.2721614 Angle, equal-sided .............................................................................................1.2721622 Angle, equal-sided .............................................................................................1.2721624 Angle, equal-sided .............................................................................................1.2721626 Angle, equal-sided .............................................................................................1.2721628 Angle, equal-sided .............................................................................................1.2721630 Angle, equal-sided .............................................................................................1.2721632 Angle, equal-sided .............................................................................................1.2721634 Angle, equal-sided .............................................................................................1.2721646 Angle, unequal-sided .........................................................................................1.1321648 Angle, unequal-sided .........................................................................................1.1321650 Angle, unequal-sided .........................................................................................1.1321666 Angle, unequal-sided .........................................................................................1.1321668 Angle, unequal-sided .........................................................................................1.1321670 Angle, unequal-sided .........................................................................................1.1321682 Angle, unequal-sided .........................................................................................1.2721684 Angle, unequal-sided .........................................................................................1.2721686 Angle, unequal-sided .........................................................................................1.2721688 Angle, unequal-sided .........................................................................................1.2721690 Angle, unequal-sided .........................................................................................1.2721692 Angle, unequal-sided .........................................................................................1.2721694 Angle, unequal-sided .........................................................................................1.2721702 Angle, unequal-sided .........................................................................................1.2721704 Angle, unequal-sided .........................................................................................1.2721706 Angle, unequal-sided .........................................................................................1.2721708 Angle, unequal-sided .........................................................................................1.2721710 Angle, unequal-sided .........................................................................................1.2721712 Angle, unequal-sided .........................................................................................1.2721714 Angle, unequal-sided .........................................................................................1.2721762 Square T .............................................................................................................1.2821764 Square T .............................................................................................................1.2821766 Square T .............................................................................................................1.2821768 Square T .............................................................................................................1.2821782 Square T .............................................................................................................1.2821784 Square T .............................................................................................................1.2821786 Square T .............................................................................................................1.2821788 Square T .............................................................................................................1.2821806 Flat bar ...............................................................................................................1.1321808 Flat bar ...............................................................................................................1.1321810 Flat bar ...............................................................................................................1.1321812 Flat bar ...............................................................................................................1.1321814 Flat bar ...............................................................................................................1.1321826 Flat bar ...............................................................................................................1.1321828 Flat bar ...............................................................................................................1.1321830 Flat bar ...............................................................................................................1.1321832 Flat bar ...............................................................................................................1.1321834 Flat bar ...............................................................................................................1.1321842 Flat bar ...............................................................................................................1.2821844 Flat bar ...............................................................................................................1.2821846 Flat bar ...............................................................................................................1.2821848 Flat bar ...............................................................................................................1.2821850 Flat bar ...............................................................................................................1.2821852 Flat bar ...............................................................................................................1.2821854 Flat bar ...............................................................................................................1.2821862 Flat bar ...............................................................................................................1.2821864 Flat bar ...............................................................................................................1.2821866 Flat bar ...............................................................................................................1.2821868 Flat bar ...............................................................................................................1.2821870 Flat bar ...............................................................................................................1.2821872 Flat bar ...............................................................................................................1.2821874 Flat bar ...............................................................................................................1.2821890 Square tube, 1 branch .......................................................................................1.1521890 Square tube, 1 branch .......................................................................................2.1521910 Square tube, 1 branch .......................................................................................1.1521910 Square tube, 1 branch .......................................................................................2.1523001 Angle, equal-sided, slotted ................................................................................4.0723002 Angle, unequal-sided, slotted ............................................................................4.0723003 Flat bar, slotted ..................................................................................................4.0523004 U-profile, slotted ................................................................................................4.0623005 T-profile, slotted .................................................................................................4.0823006 Square tube, slotted...........................................................................................4.0523011 Angle, equal-sided, slotted ................................................................................4.0723012 Angle, unequal-sided, slotted ............................................................................4.0723013 Flat bar, slotted ..................................................................................................4.0523016 Square tube, slotted...........................................................................................4.0523021 Angle, equal-sided, slotted ................................................................................4.0723031 Angle, equal-sided, slotted ................................................................................4.0723051 Angle, equal-sided, slotted ................................................................................4.0723052 Angle, unequal-sided, slotted ............................................................................4.0723053 Flat bar, slotted ..................................................................................................4.0523054 U-profile, slotted ................................................................................................4.0623055 T-profile, slotted .................................................................................................4.08

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-13

25248 Square rod .........................................................................................................1.0925264 Square rod .........................................................................................................1.0925266 Square rod .........................................................................................................1.0925268 Square rod .........................................................................................................1.0925322 Rectangular tube ................................................................................................1.0925324 Rectangular tube ................................................................................................1.0925326 Rectangular tube ................................................................................................1.0925328 Rectangular tube ................................................................................................1.0925330 Rectangular tube ................................................................................................1.0925332 Rectangular tube ................................................................................................1.0925334 Rectangular tube ................................................................................................1.0925342 Rectangular tube ................................................................................................1.0925344 Rectangular tube ................................................................................................1.0925346 Rectangular tube ................................................................................................1.0925348 Rectangular tube ................................................................................................1.0925350 Rectangular tube ................................................................................................1.0925352 Rectangular tube ................................................................................................1.0925354 Rectangular tube ................................................................................................1.0925402 Square U ............................................................................................................1.1025402 Square U ............................................................................................................3.3725404 Square U ............................................................................................................1.1025404 Square U ............................................................................................................3.3725406 Square U ............................................................................................................1.1025408 Square U ............................................................................................................1.1025410 Square U ............................................................................................................1.1025410 Square U ............................................................................................................2.1425411 Square U ............................................................................................................1.1025411 Square U ............................................................................................................2.1425412 Square U ............................................................................................................1.1025414 Square U ............................................................................................................1.1025422 Square U ............................................................................................................1.1025422 Square U ............................................................................................................3.3725424 Square U ............................................................................................................1.1025424 Square U ............................................................................................................3.3725426 Square U ............................................................................................................1.1025428 Square U ............................................................................................................1.1025430 Square U ............................................................................................................1.1025430 Square U ............................................................................................................2.1425431 Square U ............................................................................................................1.1025431 Square U ............................................................................................................2.1425432 Square U ............................................................................................................1.1025434 Square U ............................................................................................................1.1025450 Square U ............................................................................................................2.1825482 Rectangular U ....................................................................................................1.1125484 Rectangular U ....................................................................................................1.1125486 Rectangular U ....................................................................................................1.1125488 Rectangular U ....................................................................................................1.1125490 Rectangular U ....................................................................................................1.1125492 Rectangular U ....................................................................................................1.1125494 Rectangular U ....................................................................................................1.1125502 Rectangular U ....................................................................................................1.1125504 Rectangular U ....................................................................................................1.1125506 Rectangular U ....................................................................................................1.1125508 Rectangular U ....................................................................................................1.1125510 Rectangular U ....................................................................................................1.1125512 Rectangular U ....................................................................................................1.1125514 Rectangular U ....................................................................................................1.1125562 Angle, equal-sided .............................................................................................1.1125564 Angle, equal-sided .............................................................................................1.1125566 Angle, equal-sided .............................................................................................1.1125568 Angle, equal-sided .............................................................................................1.1125570 Angle, equal-sided .............................................................................................1.1125572 Angle, equal-sided .............................................................................................1.1125574 Angle, equal-sided .............................................................................................1.1125582 Angle, equal-sided .............................................................................................1.1125584 Angle, equal-sided .............................................................................................1.1125586 Angle, equal-sided .............................................................................................1.1125588 Angle, equal-sided .............................................................................................1.1125590 Angle, equal-sided .............................................................................................1.1125592 Angle, equal-sided .............................................................................................1.1125594 Angle, equal-sided .............................................................................................1.1125642 Angle, unequal-sided .........................................................................................1.1225644 Angle, unequal-sided .........................................................................................1.1225646 Angle, unequal-sided .........................................................................................1.1225648 Angle, unequal-sided .........................................................................................1.1225650 Angle, unequal-sided .........................................................................................1.1225652 Angle, unequal-sided .........................................................................................1.1225654 Angle, unequal-sided .........................................................................................1.1225662 Angle, unequal-sided .........................................................................................1.1225664 Angle, unequal-sided .........................................................................................1.1225666 Angle, unequal-sided .........................................................................................1.1225668 Angle, unequal-sided .........................................................................................1.1225670 Angle, unequal-sided .........................................................................................1.1225672 Angle, unequal-sided .........................................................................................1.1225674 Angle, unequal-sided .........................................................................................1.1225722 Square T .............................................................................................................1.1425724 Square T .............................................................................................................1.1425726 Square T .............................................................................................................1.14

25728 Square T .............................................................................................................1.1425742 Square T .............................................................................................................1.1425744 Square T .............................................................................................................1.1425746 Square T .............................................................................................................1.1425748 Square T .............................................................................................................1.1425802 Flat bar ...............................................................................................................1.1325804 Flat bar ...............................................................................................................1.1325806 Flat bar ...............................................................................................................1.1325808 Flat bar ...............................................................................................................1.1325810 Flat bar ...............................................................................................................1.1325812 Flat bar ...............................................................................................................1.1325814 Flat bar ...............................................................................................................1.1325822 Flat bar ...............................................................................................................1.1325824 Flat bar ...............................................................................................................1.1325826 Flat bar ...............................................................................................................1.1325828 Flat bar ...............................................................................................................1.1325830 Flat bar ...............................................................................................................1.1325832 Flat bar ...............................................................................................................1.1325834 Flat bar ...............................................................................................................1.1325882 Square tube, 1 branch .......................................................................................1.1525884 Square tube, 1 branch .......................................................................................1.1525886 Square tube, 1 branch .......................................................................................1.1525888 Square tube, 1 branch .......................................................................................1.1525890 Square tube, 1 branch .......................................................................................1.1525890 Square tube, 1 branch .......................................................................................2.1525891 Square tube, 1 branch .......................................................................................1.1525891 Square tube, 1 branch .......................................................................................2.1525892 Square tube, 1 branch .......................................................................................1.1525894 Square tube, 1 branch .......................................................................................1.1525902 Square tube, 1 branch .......................................................................................1.1525904 Square tube, 1 branch .......................................................................................1.1525906 Square tube, 1 branch .......................................................................................1.1525908 Square tube, 1 branch .......................................................................................1.1525910 Square tube, 1 branch .......................................................................................1.1525910 Square tube, 1 branch .......................................................................................2.1525911 Square tube, 1 branch .......................................................................................1.1525911 Square tube, 1 branch .......................................................................................2.1525912 Square tube, 1 branch .......................................................................................1.1525914 Square tube, 1 branch .......................................................................................1.1525922 Square tube, 2 branches inside .........................................................................1.1725930 Square tube, 2 branches inside .........................................................................1.1725930 Square tube, 2 branches inside .........................................................................2.1725950 Square tube, 2 branches inside .........................................................................1.1725950 Square tube, 2 branches inside .........................................................................2.1725962 Square U, 2 branches 180º ................................................................................1.1625962 Square U, 2 branches 180º ................................................................................3.3725964 Square U, 2 branches 180º ................................................................................1.1625964 Square U, 2 branches 180º ................................................................................3.3725966 Square U, 2 branches 180º ................................................................................1.1625968 Square U, 2 branches 180º ................................................................................1.1625970 Square U, 2 branches 180º ................................................................................1.1625970 Square U, 2 branches 180º ................................................................................2.1625972 Square U, 2 branches 180º ................................................................................1.1625974 Square U, 2 branches 180º ................................................................................1.1625982 Square U, 2 branches 180º ................................................................................1.1625982 Square U, 2 branches 180º ................................................................................3.3725984 Square U, 2 branches 180º ................................................................................1.1625984 Square U, 2 branches 180º ................................................................................3.3725986 Square U, 2 branches 180º ................................................................................1.1625988 Square U, 2 branches 180º ................................................................................1.1625990 Square U, 2 branches 180º ................................................................................1.1625990 Square U, 2 branches 180º ................................................................................2.1625992 Square U, 2 branches 180º ................................................................................1.1625994 Square U, 2 branches 180º ................................................................................1.1626002 Square tube, 2 branches offset ..........................................................................1.1726010 Square tube, 2 branches offset ..........................................................................1.1726010 Square tube, 2 branches offset ..........................................................................2.1726030 Square tube, 2 branches offset ..........................................................................1.1726030 Square tube, 2 branches offset ..........................................................................2.1726042 Tube, 1 short branch, vibratory finish ................................................................1.1826044 Tube, 1 short branch, vibratory finish ................................................................1.1826046 Tube, 1 short branch, vibratory finish ................................................................1.1826048 Tube, 1 short branch, vibratory finish ................................................................1.1826062 Tube, 1 short branch ..........................................................................................1.1726064 Tube, 1 short branch ..........................................................................................1.1726066 Tube, 1 short branch ..........................................................................................1.1726068 Tube, 1 short branch ..........................................................................................1.1726090 Square tube, 2 branches 180º ...........................................................................1.1626090 Square tube, 2 branches 180º ...........................................................................2.1626110 Square tube, 2 branches 180º ...........................................................................1.1626110 Square tube, 2 branches 180º ...........................................................................2.1626124 Tube, 1 long branch, vibratory finish .................................................................1.1826128 Tube, 1 long branch, vibratory finish .................................................................1.1826144 Tube, 1 long branch ...........................................................................................1.1826148 Tube, 1 long branch ...........................................................................................1.1826204 Tube, 2 branches 180º, vibratory finish .............................................................1.1926208 Tube, 2 branches 180º, vibratory finish .............................................................1.1926224 Tube, 2 branches 180º .......................................................................................1.19

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-14

28524 90º square connector, 2 spigots ........................................................................2.0528525 45° 3-D T-connector, left, 3 spigots ..................................................................2.0728526 Flange connector, 1 spigot ................................................................................2.0828527 90º nodal connector, 6 spigots ..........................................................................2.0728544 90º T-connector, 3 spigots ................................................................................2.0528545 45° 3-D T-connector, right, 3 spigots ................................................................2.0728546 Articulated flange connector, 1 spigot ...............................................................2.0828564 90º T-connector, 3 spigots ................................................................................2.0528565 45° 3-D T-connector, right, 3 spigots ................................................................2.0728566 Articulated flange connector, 1 spigot ...............................................................2.0828584 90º edge connector, 3 spigots ...........................................................................2.0528585 45º nodal connector, 4 spigots ..........................................................................2.0828586 Cross connector, 4 spigots ................................................................................2.0628604 90º edge connector, 3 spigots ...........................................................................2.0528605 45º nodal connector, 4 spigots ..........................................................................2.0828606 Cross connector, 4 spigots ................................................................................2.0628624 90º nodal connector, 4 spigots ..........................................................................2.0628625 Articulated connector, 2 spigots ........................................................................2.0928626 90º nodal connector, 5 spigots ..........................................................................2.0628644 90º nodal connector, 4 spigots ..........................................................................2.0628645 Articulated connector, 2 spigots ........................................................................2.0928646 90º nodal connector, 5 spigots ..........................................................................2.0628660 Adapter sleeve ...................................................................................................2.1028661 Universal deburrer ..............................................................................................1.3128661 Universal deburrer ..............................................................................................2.1028661 Universal deburrer ..............................................................................................4.1328668 Round bar ..........................................................................................................1.1928669 Square tube, 2 branches 180º ...........................................................................1.1628670 H section ............................................................................................................1.1428671 T-profile ..............................................................................................................1.1428672 Square tube, 1 branch offset .............................................................................1.1628683 Countersunk screw set ......................................................................................1.3628684 Countersunk screw set ......................................................................................1.3628685 Countersunk screw set ......................................................................................1.3628700 H section ............................................................................................................1.1428700 H section ............................................................................................................2.1628701 Square tube, 1 branch offset .............................................................................1.1628701 Square tube, 1 branch offset .............................................................................2.1728720 H section ............................................................................................................1.1428720 H section ............................................................................................................2.1628721 Square tube, 1 branch offset .............................................................................1.1628721 Square tube, 1 branch offset .............................................................................2.1729796 Gusset ................................................................................................................1.3129797 Gusset ................................................................................................................1.3129798 Gusset ................................................................................................................1.3129799 Step drill .............................................................................................................1.3129804 End cap, round...................................................................................................1.3229806 End cap, round...................................................................................................1.3229808 End cap, round...................................................................................................1.3229810 End cap, round...................................................................................................1.3229812 End cap, round...................................................................................................1.3229814 End cap, round...................................................................................................1.3229824 End cap, square .................................................................................................1.3229826 End cap, square .................................................................................................1.3229828 End cap, square .................................................................................................1.3229830 End cap, square .................................................................................................1.3229830 End cap, square .................................................................................................2.1229832 End cap, square .................................................................................................1.3229834 End cap, square .................................................................................................1.3229848 End cap, rectangular ..........................................................................................1.3229850 End cap, rectangular ..........................................................................................1.3229862 Compression spring ...........................................................................................1.3529864 Compression spring ...........................................................................................1.3529866 Compression spring ...........................................................................................1.3529868 Compression spring ...........................................................................................1.3529870 Compression spring ...........................................................................................1.3529872 Compression spring ...........................................................................................1.3529874 Compression spring ...........................................................................................1.3529882 Compression spring ...........................................................................................1.3529884 Compression spring ...........................................................................................1.3529886 Compression spring ...........................................................................................1.3529888 Compression spring ...........................................................................................1.3529890 Compression spring ...........................................................................................1.3529892 Compression spring ...........................................................................................1.3529894 Compression spring ...........................................................................................1.3529902 Tension spring ....................................................................................................1.3529904 Tension spring ....................................................................................................1.3529906 Tension spring ....................................................................................................1.3529908 Tension spring ....................................................................................................1.3529910 Tension spring ....................................................................................................1.3529912 Tension spring ....................................................................................................1.3529914 Tension spring ....................................................................................................1.3529922 Tension spring ....................................................................................................1.3629924 Tension spring ....................................................................................................1.3629926 Tension spring ....................................................................................................1.3629928 Tension spring ....................................................................................................1.3629930 Tension spring ....................................................................................................1.3629932 Tension spring ....................................................................................................1.36

26228 Tube, 2 branches 180º .......................................................................................1.1926284 Tube, 2 branches 90º, vibratory finish ...............................................................1.2026288 Tube, 2 branches 90º, vibratory finish ...............................................................1.2026304 Tube, 2 branches 90º .........................................................................................1.2026308 Tube, 2 branches 90º .........................................................................................1.2026364 Double tube, vibratory finish ..............................................................................1.2126384 Double tube ........................................................................................................1.2026444 Triple tube, vibratory finish .................................................................................1.2126524 Tube-tube 90º, vibratory finshing .......................................................................1.2126604 Short tube sleeve, vibratory finish ......................................................................1.2226608 Short tube sleeve, vibratory finish ......................................................................1.2226624 Short tube sleeve ...............................................................................................1.2226628 Short tube sleeve ...............................................................................................1.2226684 Long tube sleeve, vibratory finish ......................................................................1.2326704 Long tube sleeve ................................................................................................1.2226708 Long tube sleeve ................................................................................................1.2227040 Covering profile, one-sided ................................................................................3.2727042 Covering profile, one-sided, vibratory finish ......................................................3.2927060 Covering profile, two-sided ................................................................................3.2727080 Support profile, one-sided .................................................................................3.2727100 Support profile, two-sided .................................................................................3.2827120 Angle profile, two-sided .....................................................................................3.2927140 Angle profile, one-sided .....................................................................................3.2827160 Hinge profile .......................................................................................................3.2827180 Support profile, one-sided .................................................................................3.2727200 Support profile, two-sided .................................................................................3.2827220 Angle profile, two-sided .....................................................................................3.2927240 Angle profile, one-sided .....................................................................................3.2827260 Hinge profile .......................................................................................................3.2827280 Support profile, one-sided .................................................................................3.2727300 Support profile, two-sided .................................................................................3.2827320 Angle profile, two-sided .....................................................................................3.2927340 Angle profile, one-sided .....................................................................................3.2827360 Hinge profile .......................................................................................................3.2827500 Round tube ........................................................................................................3.3127501 Round tube ........................................................................................................3.3127520 Round tube ........................................................................................................3.3127521 Round tube ........................................................................................................3.3127540 Round tube ........................................................................................................3.3127541 Round tube ........................................................................................................3.3127560 Square tube........................................................................................................3.3127561 Square tube........................................................................................................3.3127580 Square tube........................................................................................................3.3127581 Square tube........................................................................................................3.3127600 Square tube........................................................................................................3.3127601 Square tube........................................................................................................3.3127742 Hanging kit .........................................................................................................3.3227802 Corner angle 90° set ..........................................................................................3.3227803 Corner angle 90° set ..........................................................................................3.3227804 Corner angle 90° set ..........................................................................................3.3227822 Corner angle 120° set ........................................................................................3.3227823 Corner angle 120° set ........................................................................................3.3227824 Corner angle 120° set ........................................................................................3.3227840 Angle, equal-sided .............................................................................................3.3527841 Angle, equal-sided .............................................................................................3.3527845 Angle, inside, equal-sided ..................................................................................3.3627846 Angle, inside, equal-sided ..................................................................................3.3627850 Angle, equal-sided .............................................................................................3.3527851 Angle, equal-sided .............................................................................................3.3527855 Angle, inside, equal-sided ..................................................................................3.3627856 Angle, inside, equal-sided ..................................................................................3.3627860 Angle, equal-sided .............................................................................................3.3527861 Angle, equal-sided .............................................................................................3.3527870 Angle, equal-sided .............................................................................................3.3527871 Angle, equal-sided .............................................................................................3.3527880 Angle, equal-sided .............................................................................................3.3527881 Angle, equal-sided .............................................................................................3.3527890 Angle, unequal-sided .........................................................................................3.3527891 Angle, unequal-sided .........................................................................................3.3527900 Angle, unequal-sided .........................................................................................3.3527901 Angle, unequal-sided .........................................................................................3.3527910 Angle, unequal-sided .........................................................................................3.3527911 Angle, unequal-sided .........................................................................................3.3527920 Square U ............................................................................................................3.3527921 Square U ............................................................................................................3.3527930 Square U ............................................................................................................3.3527931 Square U ............................................................................................................3.3527940 Square U ............................................................................................................3.3527941 Square U ............................................................................................................3.3527950 Angle, equal-sided 120° .....................................................................................3.3128400 Square tube........................................................................................................2.1328401 Square tube........................................................................................................2.1328402 Square tube........................................................................................................2.1328405 Square tube........................................................................................................2.1828504 90º square connector, 2 spigots ........................................................................2.0528505 45° 3-D T-connector, left, 3 spigots ..................................................................2.0728506 Flange connector, 1 spigot ................................................................................2.0828507 90º nodal connector, 6 spigots ..........................................................................2.07

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-15

29934 Tension spring ....................................................................................................1.3630000 Metric threaded rod ...........................................................................................1.2930001 Metric threaded rod ...........................................................................................1.2930002 Metric threaded rod ...........................................................................................1.2930003 Metric threaded rod ...........................................................................................1.2930004 Metric threaded rod ...........................................................................................1.2930005 Metric threaded rod ...........................................................................................1.2930006 Metric threaded rod ...........................................................................................1.2930007 Metric threaded rod ...........................................................................................1.2930008 Metric threaded rod ...........................................................................................1.2930009 Metric threaded rod ...........................................................................................1.2930014 Metric threaded rod ...........................................................................................1.2930015 Metric threaded rod ...........................................................................................1.2930016 Metric threaded rod ...........................................................................................1.2930018 Metric threaded rod ...........................................................................................1.2930019 Metric threaded rod ...........................................................................................1.2930020 Metric threaded rod ...........................................................................................1.2930021 Metric threaded rod ...........................................................................................1.2930022 Metric threaded rod ...........................................................................................1.2930023 Metric threaded rod ...........................................................................................1.2930024 Metric threaded rod ...........................................................................................1.2930025 Metric threaded rod ...........................................................................................1.2930026 Metric threaded rod ...........................................................................................1.2930028 Metric threaded rod ...........................................................................................1.2930029 Metric threaded rod ...........................................................................................1.2930030 Metric threaded rod ...........................................................................................1.3030031 Metric threaded rod ...........................................................................................1.3030032 Metric threaded rod ...........................................................................................1.3030033 Metric threaded rod ...........................................................................................1.3030034 Metric threaded rod ...........................................................................................1.3030035 Metric threaded rod ...........................................................................................1.3030042 Metric threaded rod ...........................................................................................1.3030043 Metric threaded rod ...........................................................................................1.3030044 Metric threaded rod ...........................................................................................1.3030052 Rubber cap ........................................................................................................1.3330053 Rubber cap ........................................................................................................1.3330054 Rubber cap ........................................................................................................1.3330055 Rubber cap ........................................................................................................1.3330056 Rubber cap ........................................................................................................1.3330058 Rubber cap ........................................................................................................1.3330059 Rubber cap ........................................................................................................1.3330060 Hexagon nut, DIN 934 ........................................................................................1.3730061 Hexagon nut, DIN 934 ........................................................................................1.3730062 Hexagon nut, DIN 934 ........................................................................................1.3730063 Hexagon nut, DIN 934 ........................................................................................1.3730064 Hexagon nut, DIN 934 ........................................................................................1.3730065 Hexagon nut, DIN 934 ........................................................................................1.3730066 Hexagon nut, DIN 934 ........................................................................................1.3730067 Hexagon nut, DIN 934 ........................................................................................1.3730068 Hexagon nut, DIN 934 ........................................................................................1.3730069 Hexagon nut, DIN 934 ........................................................................................1.3730070 Hexagon nut, DIN 934 ........................................................................................1.3730071 Hexagon nut, DIN 934 ........................................................................................1.3730072 Hexagon nut, DIN 934 ........................................................................................1.3730073 Hexagon nut, DIN 934 ........................................................................................1.3730074 Hexagon nut, DIN 934 ........................................................................................1.3730075 Hexagon nut, DIN 934 ........................................................................................1.3730076 Hexagon nut, DIN 934 ........................................................................................1.3730078 Hexagon nut, DIN 934 ........................................................................................1.3730079 Hexagon nut, DIN 934 ........................................................................................1.3730100 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830101 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830102 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830103 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830104 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830105 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830106 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830108 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830109 Hexagon nut, self-locking, DIN 985 ...................................................................1.3830112 Hexagon cap nut, self-locking, DIN 986 ............................................................1.3830113 Hexagon cap nut, self-locking, DIN 986 ............................................................1.3830114 Hexagon cap nut, self-locking, DIN 986 ............................................................1.3830115 Hexagon cap nut, self-locking, DIN 986 ............................................................1.3830116 Hexagon cap nut, self-locking, DIN 986 ............................................................1.3830122 Hexagon cap ......................................................................................................1.3430123 Hexagon cap ......................................................................................................1.3430124 Hexagon cap ......................................................................................................1.3430125 Hexagon cap ......................................................................................................1.3430126 Hexagon cap ......................................................................................................1.3430128 Hexagon cap ......................................................................................................1.3430129 Hexagon cap ......................................................................................................1.3430132 Square nut, self-locking; DIN 557 ......................................................................1.3930133 Square nut, self-locking; DIN 557 ......................................................................1.3930134 Square nut, self-locking; DIN 557 ......................................................................1.3930135 Square nut, self-locking; DIN 557 ......................................................................1.3930136 Square nut, self-locking; DIN 557 ......................................................................1.3930142 Wing nut, American shape .................................................................................1.3930143 Wing nut, American shape .................................................................................1.39

30144 Wing nut, American shape .................................................................................1.3930145 Wing nut, American shape .................................................................................1.3930146 Wing nut, American shape .................................................................................1.3930154 Lifting eye nut, DIN 582......................................................................................1.3930156 Lifting eye nut, DIN 582......................................................................................1.3930162 Knurled nut, black, with thread ..........................................................................1.4030164 Knurled nut, black, with thread ..........................................................................1.4030172 Anchor nut, DIN 7965.........................................................................................1.4030173 Anchor nut, DIN 7965.........................................................................................1.4030174 Anchor nut, DIN 7965.........................................................................................1.4030175 Anchor nut, DIN 7965.........................................................................................1.4030176 Anchor nut, DIN 7965.........................................................................................1.4030182 Hexagon connection sleeve ...............................................................................1.4130183 Hexagon connection sleeve ...............................................................................1.4130184 Hexagon connection sleeve ...............................................................................1.4130185 Hexagon connection sleeve ...............................................................................1.4130186 Hexagon connection sleeve ...............................................................................1.4130192 Turnbuckle with hook and eye, DIN 1480 ..........................................................1.3630194 Turnbuckle with hook and eye, DIN 1480 ..........................................................1.3630204 Hinged plate, black, with thread ........................................................................1.4130215 Hexagon nut .......................................................................................................1.3730224 Hand wheel, black, with thread ..........................................................................1.4030225 Hand wheel, black, with thread ..........................................................................1.4030230 Washer, DIN 9021 ..............................................................................................1.4530231 Washer, DIN 9021 ..............................................................................................1.4530232 Washer, DIN 9021 ..............................................................................................1.4530233 Washer, DIN 9021 ..............................................................................................1.4530234 Washer, DIN 9021 ..............................................................................................1.4530235 Washer, DIN 9021 ..............................................................................................1.4530236 Washer, DIN 9021 ..............................................................................................1.4530237 Washer, DIN 9021 ..............................................................................................1.4530238 Washer, DIN 9021 ..............................................................................................1.4530239 Washer, DIN 9021 ..............................................................................................1.4530240 Washer, DIN 9021 ..............................................................................................1.4530241 Washer, DIN 9021 ..............................................................................................1.4530242 Washer, DIN 9021 ..............................................................................................1.4530243 Washer, DIN 9021 ..............................................................................................1.4530244 Washer, DIN 9021 ..............................................................................................1.4530245 Washer, DIN 9021 ..............................................................................................1.4530246 Washer, DIN 9021 ..............................................................................................1.4530248 Washer, DIN 9021 ..............................................................................................1.4530249 Washer, DIN 9021 ..............................................................................................1.4530260 Washer, DIN 9021 ..............................................................................................1.4630261 Washer, DIN 9021 ..............................................................................................1.4630262 Washer, DIN 9021 ..............................................................................................1.4630263 Washer, DIN 9021 ..............................................................................................1.4630264 Washer, DIN 9021 ..............................................................................................1.4630265 Washer, DIN 9021 ..............................................................................................1.4630266 Washer, DIN 9021 ..............................................................................................1.4630270 Washer, DIN 125 ................................................................................................1.4630271 Washer, DIN 125 ................................................................................................1.4630272 Washer, DIN 125 ................................................................................................1.4630273 Washer, DIN 125 ................................................................................................1.4630274 Washer, DIN 125 ................................................................................................1.4630275 Washer, DIN 125 ................................................................................................1.4630276 Washer, DIN 125 ................................................................................................1.4630277 Washer, DIN 125 ................................................................................................1.4630278 Washer, DIN 125 ................................................................................................1.4630279 Washer, DIN 125 ................................................................................................1.4630280 Washer, DIN 125 ................................................................................................1.4730281 Washer, DIN 125 ................................................................................................1.4730282 Washer, DIN 125 ................................................................................................1.4730283 Washer, DIN 125 ................................................................................................1.4730284 Washer, DIN 125 ................................................................................................1.4730285 Washer, DIN 125 ................................................................................................1.4730286 Washer, DIN 125 ................................................................................................1.4730288 Washer, DIN 125 ................................................................................................1.4730289 Washer, DIN 125 ................................................................................................1.4730320 Serrated lock washer, DIN 6798A ......................................................................1.4730321 Serrated lock washer, DIN 6798A ......................................................................1.4730322 Serrated lock washer, DIN 6798A ......................................................................1.4730323 Serrated lock washer, DIN 6798A ......................................................................1.4730324 Serrated lock washer, DIN 6798A ......................................................................1.4730325 Serrated lock washer, DIN 6798A ......................................................................1.4730326 Serrated lock washer, DIN 6798A ......................................................................1.4730332 Adjustable ring, DIN 705 ....................................................................................1.4330333 Adjustable ring, DIN 705 ....................................................................................1.4330334 Adjustable ring, DIN 705 ....................................................................................1.4330335 Adjustable ring, DIN 705 ....................................................................................1.4330336 Adjustable ring, DIN 705 ....................................................................................1.4330342 Eye bolt, DIN 444 ...............................................................................................1.4230344 Eye bolt, DIN 444 ...............................................................................................1.4230354 Adjustable foot, black, with thread ....................................................................1.4230364 Rubber buffer, black, with thread ......................................................................1.4130374 Rubber buffer, black, with double-sided thread ................................................1.4230383 Threaded plug ....................................................................................................1.3330383 Threaded plug ....................................................................................................2.1130384 Adjustable foot ...................................................................................................1.34

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-16

34124 Round tube ........................................................................................................6.0634130 Round bar ..........................................................................................................6.0634131 Round bar ..........................................................................................................6.0634132 Round bar ..........................................................................................................6.0634140 Angle, equal-sided .............................................................................................6.0534141 Angle, equal-sided .............................................................................................6.0534142 Angle, equal-sided .............................................................................................6.0534143 Angle, equal-sided .............................................................................................6.0534144 Angle, equal-sided .............................................................................................6.0534151 Angle, unequal-sided .........................................................................................6.0534162 Square U ............................................................................................................6.0634170 Square tube........................................................................................................6.0734171 Square tube........................................................................................................6.0734172 Square tube........................................................................................................6.0734173 Rectangular tube ................................................................................................6.0734174 Rectangular tube ................................................................................................6.0734180 Angle, equal-sided .............................................................................................6.0534181 Angle, equal-sided .............................................................................................6.0534182 Angle, equal-sided .............................................................................................6.0534183 Angle, equal-sided .............................................................................................6.0534184 Angle, equal-sided .............................................................................................6.0534185 Angle, equal-sided .............................................................................................6.0534186 Angle, equal-sided .............................................................................................6.0534187 Angle, equal-sided .............................................................................................6.0534310 Flat bar, hot-rolled..............................................................................................6.0834311 Flat bar, hot-rolled..............................................................................................6.0834312 Flat bar, hot-rolled..............................................................................................6.0834313 Flat bar, hot-rolled..............................................................................................6.0834314 Flat bar, hot-rolled..............................................................................................6.0834315 Flat bar, hot-rolled..............................................................................................6.0834317 Flat bar, hot-rolled..............................................................................................6.0834318 Flat bar, hot-rolled..............................................................................................6.0834319 Flat bar, hot-rolled..............................................................................................6.0834320 Flat bar, hot-rolled..............................................................................................6.0834321 Flat bar, hot-rolled..............................................................................................6.0834330 Round tube in cold rolled steel ..........................................................................6.1034331 Round tube in cold rolled steel ..........................................................................6.1034332 Round tube in cold rolled steel ..........................................................................6.1034333 Round tube in cold rolled steel ..........................................................................6.1034334 Round tube in cold rolled steel ..........................................................................6.1034335 Round tube in cold rolled steel ..........................................................................6.1034336 Round tube in cold rolled steel ..........................................................................6.1034337 Round tube in cold rolled steel ..........................................................................6.1034338 Round tube in cold rolled steel ..........................................................................6.1034340 Round tube in cold rolled steel ..........................................................................6.1034350 Round bar, hot-rolled .........................................................................................6.1034351 Round bar, hot-rolled .........................................................................................6.1034352 Round bar, hot-rolled .........................................................................................6.1034353 Round bar, hot-rolled .........................................................................................6.1034354 Round bar, hot-rolled .........................................................................................6.1034360 Angle, equal-sided in cold rolled steel ...............................................................6.0934361 Angle, equal-sided in cold rolled steel ...............................................................6.0934362 Angle, equal-sided in cold rolled steel ...............................................................6.0934363 Angle, equal-sided in cold rolled steel ...............................................................6.0934364 Angle, equal-sided hot-rolled .............................................................................6.0834365 Angle, equal-sided hot-rolled .............................................................................6.0834366 Angle, equal-sided hot-rolled .............................................................................6.0834367 Angle, equal-sided hot-rolled .............................................................................6.0834368 Angle, equal-sided hot-rolled .............................................................................6.0834370 Angle, unequal-sided in cold rolled steel ...........................................................6.0934380 U-profile .............................................................................................................6.0934381 U-profile .............................................................................................................6.0934382 U-profile .............................................................................................................6.0934383 U-profile .............................................................................................................6.0934390 Square tube, cold-rolled ....................................................................................6.1134391 Square tube, cold-rolled ....................................................................................6.1134392 Square tube, cold-rolled ....................................................................................6.1134393 Square tube, cold-rolled ....................................................................................6.1134394 Square tube, cold-rolled ....................................................................................6.1134396 Square tube, cold-rolled ....................................................................................6.1134397 Square tube, cold-rolled ....................................................................................6.1134398 Square tube, cold-rolled ....................................................................................6.1134399 Square tube, cold-rolled ....................................................................................6.1134410 Rectangular tube ................................................................................................6.1134411 Rectangular tube ................................................................................................6.1134412 Rectangular tube ................................................................................................6.1134413 Rectangular tube ................................................................................................6.1134420 Square bar, hot-rolled ........................................................................................6.1234421 Square bar, hot-rolled ........................................................................................6.1234422 Square bar, hot-rolled ........................................................................................6.1234423 Square bar, hot-rolled ........................................................................................6.1234424 Square bar, hot-rolled ........................................................................................6.1234430 T-profile, hot-rolled ............................................................................................6.1334431 T-profile, hot-rolled ............................................................................................6.1334440 Square bar, hot-rolled, coiled ............................................................................6.1234441 Square bar, hot-rolled, coiled ............................................................................6.1234442 Square bar, hot-rolled, coiled ............................................................................6.1234443 Concrete-ribbed steel, hot-rolled .......................................................................6.12

30384 Adjustable foot ...................................................................................................2.1130385 Furniture caster ..................................................................................................1.3330385 Furniture caster ..................................................................................................2.1130386 Furniture caster ..................................................................................................1.3330386 Furniture caster ..................................................................................................2.1130400 Case corner ........................................................................................................3.3830401 Case corner ........................................................................................................3.3830402 Case corner ........................................................................................................3.3830403 Case corner ........................................................................................................3.3830404 Case corner ........................................................................................................3.3830410 Mutlitube sleeve nut kit ......................................................................................3.3330420 Prismatech sleeve nut kit, uncoated ..................................................................3.2930450 Sealing profile ....................................................................................................3.3830451 Sealing profile ....................................................................................................3.3830452 Sealing profile ....................................................................................................3.3030453 Sealing profile ....................................................................................................3.3030454 Edge protecting profile .......................................................................................3.3330455 Edge protecting profile .......................................................................................3.3330460 Perforated sheet hook, small .............................................................................3.3430461 Perforated sheet hook, large ..............................................................................3.3430470 Gusset ................................................................................................................3.3830471 Gusset ................................................................................................................3.3830683 Hard ferrite magnet with plastic case ................................................................3.3330691 Adhesive cord, strapless, with covering tape ....................................................3.3030693 Double adhesive tape with intermediate support ..............................................3.3030707 Metric threaded rod ...........................................................................................1.2930718 Metric threaded rod ...........................................................................................1.2930770 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330771 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330772 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330773 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330774 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330775 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330776 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330777 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330778 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330779 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4330780 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430781 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430782 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430783 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430784 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430785 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430786 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430790 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430791 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430792 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430793 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430794 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430795 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4430796 Set: Hexagon nuts, DIN 934, with washers, DIN 9021 ......................................1.4431890 Builder’s square with spirit level ........................................................................1.5131891 Builder’s square with spirit level ........................................................................1.5131892 Builder’s square with spirit level ........................................................................1.5131893 Builder’s square with spirit level ........................................................................1.5134010 Flat bar ...............................................................................................................6.0534011 Flat bar ...............................................................................................................6.0534012 Flat bar ...............................................................................................................6.0534020 Round tube ........................................................................................................6.0634021 Round tube ........................................................................................................6.0634022 Round tube ........................................................................................................6.0634023 Round tube ........................................................................................................6.0634024 Round tube ........................................................................................................6.0634030 Round bar ..........................................................................................................6.0634031 Round bar ..........................................................................................................6.0634032 Round bar ..........................................................................................................6.0634040 Angle, equal-sided .............................................................................................6.0534041 Angle, equal-sided .............................................................................................6.0534042 Angle, equal-sided .............................................................................................6.0534043 Angle, equal-sided .............................................................................................6.0534044 Angle, equal-sided .............................................................................................6.0534045 Angle, equal-sided .............................................................................................6.0534046 Angle, equal-sided .............................................................................................6.0534047 Angle, equal-sided .............................................................................................6.0534051 Angle, unequal-sided .........................................................................................6.0534062 Square U ............................................................................................................6.0634070 Square tube........................................................................................................6.0734071 Square tube........................................................................................................6.0734072 Square tube........................................................................................................6.0734073 Rectangular tube ................................................................................................6.0734074 Rectangular tube ................................................................................................6.0734110 Flat bar ...............................................................................................................6.0534111 Flat bar ...............................................................................................................6.0534112 Flat bar ...............................................................................................................6.0534120 Round tube ........................................................................................................6.0634121 Round tube ........................................................................................................6.0634122 Round tube ........................................................................................................6.0634123 Round tube ........................................................................................................6.06

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-17

34444 Concrete-ribbed steel, hot-rolled .......................................................................6.1234445 Concrete-ribbed steel, hot-rolled .......................................................................6.1234450 Flat bar, drawn steel .........................................................................................6.1534451 Flat bar, drawn steel .........................................................................................6.1534452 Flat bar, drawn steel .........................................................................................6.1534453 Flat bar, drawn steel .........................................................................................6.1534454 Flat bar, drawn steel .........................................................................................6.1534460 Round bar, drawn steel ......................................................................................6.1534461 Round bar, drawn steel ......................................................................................6.1534462 Round bar, drawn steel ......................................................................................6.1534463 Round bar, drawn steel ......................................................................................6.1534464 Round bar, drawn steel ......................................................................................6.1534465 Round bar, drawn steel ......................................................................................6.1534470 Square bar, drawn steel .....................................................................................6.1634471 Square bar, drawn steel .....................................................................................6.1634472 Square bar, drawn steel .....................................................................................6.1634473 Square bar, drawn steel .....................................................................................6.1634474 Square bar, drawn steel .....................................................................................6.1634510 Flat bar, hot-rolled..............................................................................................6.0834511 Flat bar, hot-rolled..............................................................................................6.0834512 Flat bar, hot-rolled..............................................................................................6.0834513 Flat bar, hot-rolled..............................................................................................6.0834514 Flat bar, hot-rolled..............................................................................................6.0834515 Flat bar, hot-rolled..............................................................................................6.0834517 Flat bar, hot-rolled..............................................................................................6.0834518 Flat bar, hot-rolled..............................................................................................6.0834519 Flat bar, hot-rolled..............................................................................................6.0834520 Flat bar, hot-rolled..............................................................................................6.0834521 Flat bar, hot-rolled..............................................................................................6.0834530 Round tube in cold rolled steel ..........................................................................6.1034531 Round tube in cold rolled steel ..........................................................................6.1034532 Round tube in cold rolled steel ..........................................................................6.1034533 Round tube in cold rolled steel ..........................................................................6.1034534 Round tube in cold rolled steel ..........................................................................6.1034535 Round tube in cold rolled steel ..........................................................................6.1034536 Round tube in cold rolled steel ..........................................................................6.1034537 Round tube in cold rolled steel ..........................................................................6.1034538 Round tube in cold rolled steel ..........................................................................6.1034540 Round tube in cold rolled steel ..........................................................................6.1034550 Round bar, hot-rolled .........................................................................................6.1034551 Round bar, hot-rolled .........................................................................................6.1034552 Round bar, hot-rolled .........................................................................................6.1034553 Round bar, hot-rolled .........................................................................................6.1034554 Round bar, hot-rolled .........................................................................................6.1034560 Angle, equal-sided in cold rolled steel ...............................................................6.0934561 Angle, equal-sided in cold rolled steel ...............................................................6.0934562 Angle, equal-sided in cold rolled steel ...............................................................6.0934563 Angle, equal-sided in cold rolled steel ...............................................................6.0934564 Angle, equal-sided hot-rolled .............................................................................6.0834565 Angle, equal-sided hot-rolled .............................................................................6.0834566 Angle, equal-sided hot-rolled .............................................................................6.0834567 Angle, equal-sided hot-rolled .............................................................................6.0834568 Angle, equal-sided hot-rolled .............................................................................6.0834570 Angle, unequal-sided in cold rolled steel ...........................................................6.0934580 U-profile .............................................................................................................6.0934581 U-profile .............................................................................................................6.0934582 U-profile .............................................................................................................6.0934583 U-profile .............................................................................................................6.0934590 Square tube, cold-rolled ....................................................................................6.1134591 Square tube, cold-rolled ....................................................................................6.1134593 Square tube, cold-rolled ....................................................................................6.1134594 Square tube, cold-rolled ....................................................................................6.1134596 Square tube, cold-rolled ....................................................................................6.1134597 Square tube, cold-rolled ....................................................................................6.1134598 Square tube, cold-rolled ....................................................................................6.1134599 Square tube, cold-rolled ....................................................................................6.1134610 Rectangular tube ................................................................................................6.1134611 Rectangular tube ................................................................................................6.1134612 Rectangular tube ................................................................................................6.1134613 Rectangular tube ................................................................................................6.1134620 Square bar, hot-rolled ........................................................................................6.1234621 Square bar, hot-rolled ........................................................................................6.1234622 Square bar, hot-rolled ........................................................................................6.1234623 Square bar, hot-rolled ........................................................................................6.1234624 Square bar, hot-rolled ........................................................................................6.1234630 T-profile, hot-rolled ............................................................................................6.1334631 T-profile, hot-rolled ............................................................................................6.1334640 Square bar, hot-rolled, coiled ............................................................................6.1234641 Square bar, hot-rolled, coiled ............................................................................6.1234642 Square bar, hot-rolled, coiled ............................................................................6.1234643 Concrete-ribbed steel, hot-rolled .......................................................................6.1234644 Concrete-ribbed steel, hot-rolled .......................................................................6.1234645 Concrete-ribbed steel, hot-rolled .......................................................................6.1234801 Metric threaded tube..........................................................................................1.3034813 Flat bar, hot-rolled..............................................................................................6.0834815 Flat bar, hot-rolled..............................................................................................6.0834818 Flat bar, hot-rolled..............................................................................................6.0834820 Flat bar, hot-rolled..............................................................................................6.08

34864 Angle, equal-sided hot-rolled .............................................................................6.0834865 Angle, equal-sided hot-rolled .............................................................................6.0834866 Angle, equal-sided hot-rolled .............................................................................6.0834867 Angle, equal-sided hot-rolled .............................................................................6.0834896 Square tube, cold-rolled ....................................................................................6.1134897 Square tube, cold-rolled ....................................................................................6.1134898 Square tube, cold-rolled ....................................................................................6.1134911 Rectangular tube ................................................................................................6.1135940 Angle, equal-sided, ferroplatan® ......................................................................6.1735941 Angle, equal-sided, ferroplatan® ......................................................................6.1735942 Angle, equal-sided, ferroplatan® ......................................................................6.1735943 Angle, equal-sided, ferroplatan® ......................................................................6.1735952 Bracket, equal-sided, self-adhesive, ferroplatan® ...........................................6.1735953 Bracket, equal-sided, self-adhesive, ferroplatan® ...........................................6.1736403 Checker plate .....................................................................................................3.2036423 Checker plate .....................................................................................................3.2036433 Checker plate .....................................................................................................3.2036453 Checker plate .....................................................................................................3.2137000 Sheet, aluminium, uncoated ..............................................................................3.1237001 Sheet, aluminium, uncoated ..............................................................................3.1237002 Sheet, aluminium, uncoated ..............................................................................3.1237003 Sheet, aluminium, uncoated ..............................................................................3.1237004 Sheet, aluminium, uncoated ..............................................................................3.1237009 Sheet, aluminium, uncoated ..............................................................................3.1237010 Sheet, aluminium, anodized ...............................................................................3.1337011 Sheet, aluminium, anodized ...............................................................................3.1337012 Sheet, aluminium, anodized ...............................................................................3.1337013 Sheet, aluminium, anodized ...............................................................................3.1337014 Sheet, aluminium, anodized ...............................................................................3.1337020 Sheet, aluminium, anodized ...............................................................................3.1337021 Sheet, aluminium, anodized ...............................................................................3.1337022 Sheet, aluminium, anodized ...............................................................................3.1337023 Sheet, aluminium, anodized ...............................................................................3.1337024 Sheet, aluminium, anodized ...............................................................................3.1337050 Roughcast sheet ................................................................................................3.1937051 Roughcast sheet ................................................................................................3.1937052 Roughcast sheet ................................................................................................3.1937053 Roughcast sheet ................................................................................................3.1937054 Roughcast sheet ................................................................................................3.1937059 Roughcast sheet ................................................................................................3.1937074 Roughcast sheet ................................................................................................3.1937100 Hammer effect sheet ..........................................................................................3.1837101 Hammer effect sheet ..........................................................................................3.1837102 Hammer effect sheet ..........................................................................................3.1837103 Hammer effect sheet ..........................................................................................3.1837104 Hammer effect sheet ..........................................................................................3.1837109 Hammer effect sheet ..........................................................................................3.1837120 Hammer effect sheet ..........................................................................................3.1837121 Hammer effect sheet ..........................................................................................3.1837122 Hammer effect sheet ..........................................................................................3.1837123 Hammer effect sheet ..........................................................................................3.1837124 Hammer effect sheet ..........................................................................................3.1837140 Hammer effect sheet ..........................................................................................3.1837141 Hammer effect sheet ..........................................................................................3.1837142 Hammer effect sheet ..........................................................................................3.1837143 Hammer effect sheet ..........................................................................................3.1837144 Hammer effect sheet ..........................................................................................3.1837149 Hammer effect sheet ..........................................................................................3.1837150 Checker plate .....................................................................................................3.2037151 Checker plate .....................................................................................................3.2037152 Checker plate .....................................................................................................3.2037153 Checker plate .....................................................................................................3.2037154 Checker plate .....................................................................................................3.2037155 Checker plate .....................................................................................................3.2037156 Checker plate .....................................................................................................3.2037159 Checker plate .....................................................................................................3.2037171 Checker plate .....................................................................................................3.2037172 Checker plate .....................................................................................................3.2037173 Checker plate .....................................................................................................3.2037175 Checker plate .....................................................................................................3.2037176 Checker plate .....................................................................................................3.2037210 Cross hole sheet ................................................................................................3.2237211 Cross hole sheet ................................................................................................3.2237212 Cross hole sheet ................................................................................................3.2237213 Cross hole sheet ................................................................................................3.2237214 Cross hole sheet ................................................................................................3.2237260 Slotted hole sheet ..............................................................................................3.2237261 Slotted hole sheet ..............................................................................................3.2237262 Slotted hole sheet ..............................................................................................3.2237263 Slotted hole sheet ..............................................................................................3.2237264 Slotted hole sheet ..............................................................................................3.2237310 Square hole sheet ..............................................................................................3.2337311 Square hole sheet ..............................................................................................3.2337312 Square hole sheet ..............................................................................................3.2337313 Square hole sheet ..............................................................................................3.2337314 Square hole sheet ..............................................................................................3.2337360 Round hole sheet ...............................................................................................3.2237361 Round hole sheet ...............................................................................................3.22

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-18

38117 Sheet, raw steel .................................................................................................3.1438118 Plain sheet, steel, untreated, processed ............................................................3.1538119 Bolt clamp ..........................................................................................................3.3438150 Sheet, solid copper ............................................................................................3.1638151 Sheet, solid copper ............................................................................................3.1638152 Sheet, solid copper ............................................................................................3.1638153 Sheet, solid copper ............................................................................................3.1638154 Sheet, solid copper ............................................................................................3.1638200 Sheet, aluminium, anodized ...............................................................................3.1338201 Sheet, aluminium, anodized ...............................................................................3.1338202 Sheet, aluminium, anodized ...............................................................................3.1338203 Sheet, aluminium, anodized ...............................................................................3.1338204 Sheet, aluminium, anodized ...............................................................................3.1338209 Sheet, aluminium, anodized ...............................................................................3.1338250 Sheet, stainless steel .........................................................................................3.1638251 Sheet, stainless steel .........................................................................................3.1638252 Sheet, stainless steel .........................................................................................3.1638253 Sheet, stainless steel .........................................................................................3.1638254 Sheet, stainless steel .........................................................................................3.1638259 Sheet, aluminium, uncoated ..............................................................................3.1238261 Sheet, aluminium, uncoated ..............................................................................3.1238262 Sheet, aluminium, uncoated ..............................................................................3.1238264 Sheet, aluminium, uncoated ..............................................................................3.1238270 Sheet, aluminium, uncoated ..............................................................................3.1238271 Sheet, aluminium, uncoated ..............................................................................3.1238272 Sheet, aluminium, uncoated ..............................................................................3.1238273 Sheet, aluminium, uncoated ..............................................................................3.1238274 Sheet, aluminium, uncoated ..............................................................................3.1238280 Barleycorn ..........................................................................................................3.1938281 Barleycorn ..........................................................................................................3.1938282 Barleycorn ..........................................................................................................3.1938283 Barleycorn ..........................................................................................................3.1938284 Barleycorn ..........................................................................................................3.1938294 Corrugated sheet ...............................................................................................3.1738354 Plastic panel (PC, transparent) ...........................................................................3.1138502 Sheet, aluminium, coated ..................................................................................3.1238503 Sheet, aluminium, coated ..................................................................................3.1238504 Sheet, aluminium, coated ..................................................................................3.1238524 Sheet, aluminium, coated ..................................................................................3.1238534 Sheet, aluminium, coated ..................................................................................3.1238544 Sheet, aluminium, coated ..................................................................................3.1238574 Sheet, aluminium, coated ..................................................................................3.1238600 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138601 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138602 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138603 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138604 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138610 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138611 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138612 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138613 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1138614 Plastic panel (hard PVC), hot-embossed, self-adhesive ....................................3.1139001 Angle, equal-sided, slotted ................................................................................4.1039002 Angle, unequal-sided, slotted ............................................................................4.1139003 Flat bar, slotted ..................................................................................................4.0939004 U-profile, slotted ................................................................................................4.0939011 Angle, equal-sided, slotted ................................................................................4.1039012 Angle, unequal-sided, slotted ............................................................................4.1139013 Flat bar, slotted ..................................................................................................4.0939021 Angle, equal-sided, slotted ................................................................................4.1039031 Angle, equal-sided, slotted ................................................................................4.1039051 Angle, equal-sided, slotted ................................................................................4.1039052 Angle, unequal-sided, slotted ............................................................................4.1139053 Flat bar, slotted ..................................................................................................4.0939054 U-profile, slotted ................................................................................................4.0939061 Angle, equal-sided, slotted ................................................................................4.1039062 Angle, unequal-sided, slotted ............................................................................4.1139063 Flat bar, slotted ..................................................................................................4.0939101 Angle, equal-sided, slotted ................................................................................4.1039102 Angle, unequal-sided, slotted ............................................................................4.1139103 Flat bar, slotted ..................................................................................................4.0939104 U-profile, slotted ................................................................................................4.0939111 Angle, equal-sided, slotted ................................................................................4.1039112 Angle, unequal-sided, slotted ............................................................................4.1139113 Flat bar, slotted ..................................................................................................4.0939151 Angle, equal-sided, slotted ................................................................................4.1039152 Angle, unequal-sided, slotted ............................................................................4.1139153 Flat bar, slotted ..................................................................................................4.0939154 U-profile, slotted ................................................................................................4.1039161 Angle, equal-sided, slotted ................................................................................4.1039162 Angle, unequal-sided, slotted ............................................................................4.1139163 Flat bar, slotted ..................................................................................................4.0939171 Angle, equal-sided, slotted ................................................................................4.1039181 Angle, equal-sided, slotted ................................................................................4.1039201 Angle, equal-sided, slotted ................................................................................4.1039202 Angle, unequal-sided, slotted ............................................................................4.1139203 Flat bar, slotted ..................................................................................................4.0939204 U-profile, slotted ................................................................................................4.10

37362 Round hole sheet ...............................................................................................3.2237363 Round hole sheet ...............................................................................................3.2237364 Round hole sheet ...............................................................................................3.2237369 Round hole sheet ...............................................................................................3.2237410 Round hole sheet ...............................................................................................3.2237411 Round hole sheet ...............................................................................................3.2237412 Round hole sheet ...............................................................................................3.2237413 Round hole sheet ...............................................................................................3.2237414 Round hole sheet ...............................................................................................3.2237460 Stretch metal ......................................................................................................3.2537461 Stretch metal ......................................................................................................3.2537462 Stretch metal ......................................................................................................3.2537463 Stretch metal ......................................................................................................3.2537464 Stretch metal ......................................................................................................3.2537469 Stretch metal ......................................................................................................3.2537470 Stretch metal ......................................................................................................3.2537471 Stretch metal ......................................................................................................3.2537472 Stretch metal ......................................................................................................3.2537473 Stretch metal ......................................................................................................3.2537474 Stretch metal ......................................................................................................3.2537479 Stretch metal ......................................................................................................3.2537509 Checker plate .....................................................................................................3.2037521 Stretch metal ......................................................................................................3.2637523 Stretch metal ......................................................................................................3.2637524 Stretch metal ......................................................................................................3.2637550 Sheet, aluminium, uncoated ..............................................................................3.1237551 Sheet, aluminium, uncoated ..............................................................................3.1237552 Sheet, aluminium, uncoated ..............................................................................3.1237553 Sheet, aluminium, uncoated ..............................................................................3.1237554 Sheet, aluminium, uncoated ..............................................................................3.1237559 Sheet, aluminium, uncoated ..............................................................................3.1237600 Stretch metal ......................................................................................................3.2637601 Stretch metal ......................................................................................................3.2637602 Stretch metal ......................................................................................................3.2637603 Stretch metal ......................................................................................................3.2637604 Stretch metal ......................................................................................................3.2637650 Stretch metal ......................................................................................................3.2637651 Stretch metal ......................................................................................................3.2637652 Stretch metal ......................................................................................................3.2637653 Stretch metal ......................................................................................................3.2637654 Stretch metal ......................................................................................................3.2637700 Stretch metal ......................................................................................................3.2637701 Stretch metal ......................................................................................................3.2637702 Stretch metal ......................................................................................................3.2637703 Stretch metal ......................................................................................................3.2637704 Stretch metal ......................................................................................................3.2637800 Round hole sheet ...............................................................................................3.2337801 Round hole sheet ...............................................................................................3.2337802 Round hole sheet ...............................................................................................3.2337803 Round hole sheet ...............................................................................................3.2337804 Round hole sheet ...............................................................................................3.2337809 Round hole sheet ...............................................................................................3.2337850 Round hole sheet ...............................................................................................3.2437851 Round hole sheet ...............................................................................................3.2437852 Round hole sheet ...............................................................................................3.2437853 Round hole sheet ...............................................................................................3.2437854 Round hole sheet ...............................................................................................3.2437859 Round hole sheet ...............................................................................................3.2437910 Round studded sheet.........................................................................................3.1737911 Round studded sheet.........................................................................................3.1737912 Round studded sheet.........................................................................................3.1737913 Round studded sheet.........................................................................................3.1737914 Round studded sheet.........................................................................................3.1737960 Square studded sheet .......................................................................................3.1737961 Square studded sheet .......................................................................................3.1737962 Square studded sheet .......................................................................................3.1737963 Square studded sheet .......................................................................................3.1737964 Square studded sheet .......................................................................................3.1738010 Square hole sheet ..............................................................................................3.2438011 Square hole sheet ..............................................................................................3.2438012 Square hole sheet ..............................................................................................3.2438013 Square hole sheet ..............................................................................................3.2438014 Square hole sheet ..............................................................................................3.2438050 Sheet, steel, galvanized .....................................................................................3.1438051 Sheet, steel, galvanized .....................................................................................3.1438052 Sheet, steel, galvanized .....................................................................................3.1438053 Sheet, steel, galvanized .....................................................................................3.1438054 Sheet, steel, galvanized .....................................................................................3.1438059 Sheet, steel, galvanized .....................................................................................3.1438061 Sheet, solid brass ..............................................................................................3.1638064 Sheet, solid brass ..............................................................................................3.1638100 Sheet, raw steel .................................................................................................3.1438101 Sheet, raw steel .................................................................................................3.1438102 Sheet, raw steel .................................................................................................3.1438103 Sheet, raw steel .................................................................................................3.1438104 Sheet, raw steel .................................................................................................3.1438109 Sheet, raw steel .................................................................................................3.1438114 Sheet, raw steel .................................................................................................3.14

Item number summary



Hard

ware catalogue | 97002 | 01 2017 | 71708

IND-19

39211 Angle, equal-sided, slotted ................................................................................4.1039212 Angle, unequal-sided, slotted ............................................................................4.1139213 Flat bar, slotted ..................................................................................................4.0939251 Angle, equal-sided, slotted ................................................................................4.1039252 Angle, unequal-sided, slotted ............................................................................4.1139253 Flat bar, slotted ..................................................................................................4.0939254 U-profile, slotted ................................................................................................4.1039261 Angle, equal-sided, slotted ................................................................................4.1039262 Angle, unequal-sided, slotted ............................................................................4.1139263 Flat bar, slotted ..................................................................................................4.0939301 Angle, equal-sided, slotted ................................................................................4.1039351 Angle, equal-sided, slotted ................................................................................4.1039400 Flat bar, cold-rolled, galvanized .........................................................................6.1439401 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439402 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439403 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439404 Angle, unequal-sided in cold rolled steel, galvanized ........................................6.1439405 Angle, unequal-sided in cold rolled steel, galvanized ........................................6.1439406 Flat bar, cold-rolled, galvanized .........................................................................6.1439407 U-profile, cold-rolled, galvanized .......................................................................6.1539410 Flat bar, cold-rolled, galvanized .........................................................................6.1439411 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439412 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439413 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439414 Angle, unequal-sided in cold rolled steel, galvanized ........................................6.1439415 Angle, unequal-sided in cold rolled steel, galvanized ........................................6.1439416 Flat bar, cold-rolled, galvanized .........................................................................6.1439417 U-profile, cold-rolled, galvanized .......................................................................6.1539420 Flat bar, cold-rolled, galvanized .........................................................................6.1439421 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439422 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439423 Angle, equal-sided in cold rolled steel, galvanized ............................................6.1439424 Angle, unequal-sided in cold rolled steel, galvanized ........................................6.1439425 Angle, unequal-sided in cold rolled steel, galvanized ........................................6.1439426 Flat bar, cold-rolled, galvanized .........................................................................6.1439427 U-profile, cold-rolled, galvanized .......................................................................6.1539480 Cylinder head screw set .....................................................................................4.1239481 Cylinder head screw set .....................................................................................4.1239482 Oval-headed screw set ......................................................................................4.1239483 Oval-headed screw set ......................................................................................4.1239484 Oval-headed screw set ......................................................................................4.12

39485 Oval-headed screw set ......................................................................................4.1239486 Oval-headed screw set ......................................................................................4.1239487 Oval-headed screw set ......................................................................................4.1239490 Shelf unit foot .....................................................................................................1.3439490 Shelf unit foot .....................................................................................................4.1239491 Shelf unit foot .....................................................................................................1.3439491 Shelf unit foot .....................................................................................................4.1240101 ‘Profi’ keyhole saw .............................................................................................1.5041120 Piccolo-mitre box MP 7 .....................................................................................1.4841121 Precision-mitre box MP 8 ..................................................................................1.4841122 Precision-mitre box MP 9 ..................................................................................1.4841123 Precision-mitre box with clamp element MP 10 ................................................1.4941126 2 prisms MP 13 (for mitre box MP 10) ...............................................................1.4941127 ‘Vario’-mitre box MP 14 .....................................................................................1.4941200 ‘Profi’-ruler .........................................................................................................1.5141215 ‘Profi’-angle, with bevel ruler and parallel-template ..........................................1.5141216 ‘Profi’-angle, with bevel ruler and parallel-template ..........................................1.5141217 ‘Profi’-angle, with bevel ruler and parallel-template ..........................................1.5141218 ‘Profi’-angle, with bevel ruler and parallel-template ..........................................1.5145111 Maxi-saw ............................................................................................................1.5045152 Multi-clamp ........................................................................................................1.5048001 Design sheet, smooth ........................................................................................3.0948002 Design sheet, smooth ........................................................................................3.0948003 Design sheet, smooth ........................................................................................3.0948004 Design sheet structure .......................................................................................3.1048005 Design sheet structure .......................................................................................3.1048006 Design sheet, smooth ........................................................................................3.0948007 Design sheet, smooth ........................................................................................3.0948008 Design sheet, smooth ........................................................................................3.0948009 Design sheet structure .......................................................................................3.1148010 Design sheet structure .......................................................................................3.1048011 Design sheet, flexible .........................................................................................3.0948012 Design sheet, flexible .........................................................................................3.0948013 Design sheet, flexible .........................................................................................3.0948014 Design sheet, corrugated ...................................................................................3.0948015 Design sheet, corrugated ...................................................................................3.0948016 Design sheet structure .......................................................................................3.1048017 Design sheet with square holes .........................................................................3.1048018 Design sheet with square studs .........................................................................3.1048019 Design sheet structure .......................................................................................3.10

Item number summary



Har

dw

are

cata

logu

e | 9

7002

| 01

201

7 | 7

1708

IND-20

Terms and Conditions of Supply and Payment

1. Scope

1.1. These Terms and Conditions of Supply and Payment for Exports apply to all

contractual agreements between ourselves and parties placing orders with us which

have their registered offices or the branch involved with the contractual agree-

ment outside the territory of the Federal Republic of Germany. That branch which

concludes the contractual agreement in its own name shall respectively apply.

1.2. These Terms and Conditions of Supply and Payment for Exports shall not

apply if the party placing the order acquires the goods for personal use or use in

a family or household and we knew or should have known such upon the con-

clusion of the agreement.

1.3. If the party placing the order’s terms and conditions of purchase differ from

these Terms and Conditions of Supply and Payment for Exports, such terms and

conditions of purchase shall only apply if such are expressly confirmed in writing by

ourselves. Counter-confirmations by a party placing an order citing its own terms

and conditions are herewith expressly contested and rejected.

1.4. Our Terms and Conditions of Supply and Payment shall also apply exclu-

sively and without restriction even if we effect supply to the party placing the or-

der without reservation in awareness of contrary or differing terms and conditions

of the party placing the order.

2. Conclusion and subject of the agreement

2.1. Any and all of our offers are non-binding.

2.2. Models, illustrations, drawings, colour tones, etc., that are contained in cat-

alogues, brochures and other printed matter may differ slightly from the features

of the products to be supplied as a result of printing technology; such differenc-

es shall not be deemed to constitute defects.

2.3. Illustrations and drawings relating to our goods in brochures, written advertis-

ing material and on price lists as well as the data contained therein, e.g. on materi-

al, dimensions or shape, shall only become a legally binding part of the agreement

if the agreement expressly makes reference to such. Information on product fea-

tures shall not be deemed to constitute an assumption of guarantee.

2.4. The party placing an order shall notify us prior to the conclusion of the agree-

ment if the goods to be supplied are supposed to be suited solely for regular use

or are to be used under unusual or special conditions or if the goods are to be

used in any conditions posing a health, safety or environmental risk or the goods

will be subject to increased demands or if use of the goods could be associated

with unusual possibilities for damage or unusual amounts of damage which the

party placing the order is aware of or should be aware of.

3. Custom-made products

3.1. Custom-made products shall be deemed to designate all models that devi-

ate from the models referenced in the respectively valid catalogue or brochure.

This especially applies with regard to colours.

3.2. Orders for custom-made products without exception require written confirma-

tion by both parties in the information on the design, dimensions, etc.

3.3. The party placing the order shall not acquire any rights to tools by virtue of

paying remuneration for costs or shares of costs for the creation or acquisition of

tools; we shall retain title to tools.

3.4. Requested samples shall only be supplied subject to charge.

3.5. We shall not be liable for defects that emanate from documents submit-

ted to us by the party placing the order with respect to custom-made products.

3.6. If the custom-made product is manufactured based on drawings, models or

other information provided by the party placing the order, we shall not be liable

for the violation of third-party protective rights. The party placing the order here-

with indemnifies us with respect to claims by third parties.

4. Minimum order value and prices

4.1. The minimum order value for initial orders is EUR 150.00 plus taxes and cus-

toms duties. The minimum order value for all subsequent orders is EUR 25.00

plus taxes and customs duties.

4.2. Prices do not include possible additional charges such as duties, taxes and

other levies and, if nothing to the contrary results from the confirmation of contract

and number 5.1 below, apply EXW (Incoterm 2010) from our plant in Wutöschin-

gen not including freight and packaging costs.

5. Freight and packaging costs

5.1. By way of deviation from EXW (Incoterms 2010), consignments having an

order value of at least EUR 250.00 not including taxes and customs duties shall

be shipped free domicile in Germany and franco frontier to foreign countries.

5.2. The weights and piece numbers determined upon shipment shall apply in the

calculation of freight costs.

5.3 Packaging costs shall be charged at the usual rates in this line of business.

6. Delivery and transfer of risk

6.1. EXW (Incoterms 2010) from our plant in Wutöschingen shall apply to delivery

and transfer of risk even if we assume the freight costs unless a special delivery

clause has been agreed upon.

6.2. If the goods are transported to the party placing the order, such shall be at

the risk of the party placing the order. In this case risk shall be transferred to the

party placing the order at that point in time at which the first carrier takes on the

goods. If the goods are ready for shipment and shipment is delayed for reasons

for which we are not responsible, risk shall be transferred to the party placing the

order upon receipt of the notice of readiness for shipment.

7. Delivery periods, non-availability of performance and delay

7.1. The delivery periods stated are generally non-binding.

7.2. A bindingly committed delivery period shall commence upon the date on which

our confirmation of order is sent, but at the earliest at the point in time at which all

documents and data to be provided by the party placing the order are received by us.

7.3. The delivery period shall be deemed to have been adhered to if the goods

leave the plant before the delivery period expires or notification has been provid-

ed that the goods are ready for shipment.

7.4. If we are unable to meet binding delivery periods in whole or regarding part

of the goods to be delivered, we shall notify the party placing the order with-

out undue delay and at the same time notify the party placing the order about

the probable new delivery period. If the good to be delivered is still not availa-

ble before the expiry of the new delivery period for reasons for which we are not

responsible, we shall be entitled to cancel the agreement in whole or in part; we

shall repay any counter-performance already rendered by the party placing the

order without undue delay.

7.5. In any case a claim to compensation for late delivery on the part of the par-

ty placing the order shall be subject to the requirement that the party placing

the order has set us a reasonable grace period and we have not effected deliv-

ery within this period.

7.5. The legal rights of the party placing the order shall otherwise remain unaffect-

ed. We shall only bear liability, however, if we are responsible for the delay and only

within the framework of no. 11 below. We shall in particular not be responsible for

delivery not being effected to us in due time by our suppliers.

8. Terms and conditions of payment

8.1. The party placing the order shall review all invoices without undue delay af-

ter receiving such to make sure that they are correct and complete. Any objec-

tions to invoices shall be issued in writing within a period of one month after their

receipt. Failure to state objections in due time shall be deemed to constitute ap-

proval of the invoice.

8.2. Our invoices shall be due for payment within 10 days with a 2% discount or

within 30 days of the respective invoice date net. The date when payment is cred-

ited to the account stated

for payment on the invoice shall apply in determining whether payment has been

effected in due time by the party placing the order. The party placing the or-

der shall bear all additional costs that arise in connection with the selection of

the means of payment.

8.3. If the party placing the order fails to pay the purchase price in due time, we

shall be entitled notwithstanding other legal recourse to charge interest on ar-

rears in the amount of 9 percentage points above the respective base interest

rate of the European Central Bank. We reserve the right to claim damage go-

ing above and beyond this.

8.4. We shall be entitled to transfer our claims emanating from the business rela-

tionship with the party placing the order for the purposes of factoring.

8.5. If payment is rendered with a bill of exchange, the party placing the order shall

bear the costs of such, in particular discounting and collection charges. No dis-

count shall be granted if payment is effected by bill of exchange.

8.6. Costs of a bill of exchange that has been invoiced shall be due for payment

immediately without any deductions.

8.7. Bills of acceptance and bills of exchange shall only be deemed to constitute

payment after their redemption.

8.8. Setting off or netting amounts shall only be possible in the case of counter-claims

that are based on the same legal relationship, that have been effectively estab-

lished by a court of law or government authority, or are uncontested or recognised.

8.9. The party placing the order shall only be entitled to exercise a right of reten-

tion if its counter-claim is based on the same legal relationship.

8.10. We shall be entitled to credit payments effected by the party placing the or-

der to older debt of said party.

9. Examination and notification of non-conformity obligation

9.1. The party placing the order shall properly examine the goods or have the

goods properly examined without undue dely.

9.2. Shipping papers may not be signed (including subject to reservation) be-

fore the number of boxes delivered has been compared with the information con-

tained in the shipping papers. Boxes that are missing or damaged must be noted

with precise information on such being provided on the shipping papers and be

confirmed by the freight carrier driver by means of a clearly identifiable signature.

9.3. Our liability for the goods violating the agreement shall cease to apply with-

out the party placing the order for this reason being able to exonerate itself if the

party placing the order fails to notify us about such violation of the agreement in

writing within a period of 7 working days (Saturdays shall not be deemed to consti-

tute working days) after it determines such or should have determined such while

precisely stating the type of violation of agreement. Written notification of lack of

conformity by the party placing the order must have been sent by the party placing

the order within the aforementioned period; above and beyond the notice of lack

of conformity being sent in due time, such must also actually be received by us.

9.4. If after a notice of lack of conformity is issued by the party placing the order

no violation of the agreement can be identified, the party placing the order shall

reimburse us for the costs incurred in connection with the inspection of the goods.

9.5. The party placing the order shall at any rate lose the right to claim lack of con-

formity of the goods if it does not provide notice of such within a period of no more

than 12 months after it has actually been handed over the goods unless we have

granted a longer period of guarantee to the party placing the order.

10. Goods lacking conformity or exhibiting legal defects

10.1. Goods for which a complaint has been issued shall be properly stored

and kept available

to us.

10.2. We shall be provided the opportunity to inspect the goods for which a com-

plaint has been issued.

10.3. If it is demonstrated that the goods lack conformity, we shall be entitled even

after the agreed-upon delivery period either to remedy the lack of conformity of

the goods by repair or supply a substitute contemporaneously with return of the

goods for which a complaint has been issued as we see fit. In the event of reme-

dy by repair or supply of substitute goods, we shall be obligated to bear all of the

expenses that are required for this purpose (including transport, road, labour and

material costs) if such expenses do not increase because the goods have been

sent to a place other than the place of fulfilment of the agreement.

10.4. If the party placing the order sets a reasonable grace period for remedy by

repair or supply of substitute goods and repair or supply of substitute goods does

not take place within this grace period or if such is refused by us, the party placing

the order shall be entitled to reduce the purchase price or declare the agreement

avoided in accordance with statutory arrangements. The reduction of the purchase

price shall be limited to the damage incurred by the customer.

10.5. Supply of substitute goods or remedy by repair shall not cause the period

laid down in no. 9.5 to recommence anew.

11. Liability

11.1. We shall bear unlimited liability for harm to life and limb or health impairment

that is due to the wilful or negligent violation of an obligation by ourselves or that

is due to a wilful or negligent violation of an obligation by our legal representative

or parties we hire to carry out the agreement.

11.2. We shall bear liability based on the principles of German law governing prod-

uct liability and on the assumption of a guarantee.

11.3. We shall moreover only bear liability in the case of wilful or negligent violation

of an essential contractual obligation and only for direct damage that was fore-

seeable and which typically occurs at the point in time when the agreement was

concluded. An essential contractual obligation shall be deemed to be an obliga-

tion that makes the proper fulfilment of the agreement concluded with the party

placing the order possible in the first place and which the party placing the order

trusted in and was able to trust in and the culpable failure to fulfil such jeopard-

ises achievement of the purpose of the agreement.

11.4. Our liability is excluded in all other cases, in particular for indirect damage and

subsequent damage (including foregone profit, loss of goodwill, damage due to

loss of production and comparable expenses) unless the party placing the order

expressly drew our attention to such in accordance with no. 2.4. prior to the con-

clusion of the agreement.

11.5. If our liability is excluded or limited, this shall also apply to our employees,

representatives and parties we hire to carry out the agreement.

12. Reservation of title

12.1. We reserve title to the goods supplied by us if our claim to the purchase

price is not secured by some other means (e.g. a letter of credit) until payment of

all current and future claims emanating from the purchase agreement and the on-

going business relationship (the claims to be secured) is effected.

12.2. We shall be obligated to release collateral that we are entitled to as we see

fit to the extent that the realisable value of the collateral exceeds our claims to

be secured by more than 10% if so requested by the party placing the order.

12.2. The party placing the order shall notify us without undue delay in the event

of attachment, confiscation or similar and in the event of the goods supplied be-

ing damaged and/or lost; any violation of this obligation as well as any other con-

duct of the buyer in violation of the agreement, in particular failure to pay the pur-

chase price due for payment, shall provide us the right to declare this agreement

avoided. The party placing the order shall bear all the costs that have had to be in-

curred particularly within the framework of a third -party action successfully lifting

an attachment and that may have had to be incurred to successfully reacquire the

objects supplied if such cannot be collected from third parties.

12.3.

If we have effectively declared the agreement avoided, we shall be entitled to take

back the goods subject to reservation of title if we have threatened to take the

goods back a reasonable time in advance. The costs incurred as a result of ex-

ercise of the right to take back the goods, in particular transport costs, shall be

borne by the party placing the order. We shall be entitled to exploit the goods sub-

ject to reservation of title and satisfy our claims from the proceeds from such ex-

ploitation if we have threatened such exploitation a reasonable time in advance.

If the proceeds exceed the unsatisfied claims emanating from the contractual re-

lationship, this surplus amount shall be handed over to the party placing the order.

13. Place of fulfilment, applicable law and legal venue

13.1. The place of fulfilment for delivery and payment shall be our head office

(Wutöschingen).

13.2. The Convention of the United Nations on the International Sale of Goods from

11 April 1980 (UN purchasing law/CISG) in the English-language version shall ap-

ply to the legal relationship with the party placing the order. Legal issues that are

not set out in this Convention or which cannot be decided in accordance with its

principles shall be subject to German law.

13.3. The sole legal venue for all disputes arising in connection with the agreement

is the courts having jurisdiction over our head office of the company in Wutöschin-

gen. We shall, however, also be entitled to assert claims with courts having juris-

diction over the party placing the order.

alfer® aluminium Gesellschaft mbH

Commercial Register of Freiburg Local Court HRB 620 227 Status: 05/2016



IND-21

Hardware catalogueAvailable in a choice of colours

Uncoated and anodized aluminium

Steel, stainless steel, ferroplatan®, brass, brassed iron and copper


Plastic

The colours shown are for reference purposes only and may differ from the actual colours for display reasons.

maple

uncoated

pine

black

black

brown

beech

beechbrilliant-white

brilliant-white

champagne

polished champagne

copper

copperstainless steel

silver polished silver

silver

polished black corrugated

platinum silver

polished whitepolished silver

brushed stainless steel

silver structure

mirror finish

green pinkyellow

brushed copper

black structurebrushed silver

polished white corrugated

dull finish silverstainless steel polished

vintage silver

polished black

blue red

concrete look copper structure

stainless steel visual effect

stainless steel visual effect

champagne

chrome look

chrome look

oak rustic oak

galvanized

white

whitenatural

wenge

grey polished grey

granite-red

wood white

wood decor, dark

granite-white

black polished black

light oak

brass

brasstitanium

titanium

wood decor, light

walnut

alfer® hardware catalogue...hardware catalogue | 97002 | 01 2017 | 71708 combitech ® tool...

Documents