all for an ideal kitchen - häfelehafele.com/my/en/documents/hma_kichen_2014.pdf · your recipe for...

ww

w.h

afe

le.c

om

.my

KITCHENAll for an ideal

THE FOUR ZONES

YOUR RECIPE FOR THE IDEAL KITCHEN

Having used the work triangle to decide the overall layout of your kitchen, you need to think about

your main tasks and the ‘zones’ where you’ll carry them out. This will help you decide the type of

storage and appliances you need, and exactly where you should position them to ensure everything’s

just where you need it.

FOOD STORAGE ZONE

First, make sure you have enough storage space – for tins and packets, and all your fresh ingredients.

Then think about your shopping and cooking habits, and decide what type of units you need.

Also consider a worktop in this zone to make unpacking your shopping easier.

Idea: Larder units are perfect space savers for an optimum amount of storage.

CLEANING ZONE

As most kitchens today have a dishwasher, the sink is used more for preparing food than washing

up. So it needs to be close to your cooker for washing vegetables and draining rice or pasta, and

you’ll need a waste bin or recycling.

Idea: Lockable cleaning basket for safe storage of cleaning products and a swing-out waste bin for

simple and discreet recycling.

PREPARATION ZONE

The amount of work surface you need depends on how keen a cook you are. If possible, position

your surfaces near both the sink and the cooker, with your utensils stored close by in speciality base

unit storage.

Idea: Cutlery drawer inserts provide storage for crucial herbs, spices and utensils.

COOKING ZONE

You don’t want to have to go far with hot pans, so plan your oven and hob near the sink and work-

tops. You’ll also want your pans stored nearby, utensils close at hand and spices in easy reach.

Idea: Try a fi xed hanging rail and choose the accessories that best suit your lifestyle. Don’t forget

under-oven drawers can provide convenient well hidden additional storage.

FOOD STORAGE CLEANING ZONE PREPARATION ZONE COOKING ZONE

CONTENTS

STORAGE SYSTEMS PAGE 4

DRAWER SYSTEMS

IRONING BOARD

PAGE 18

PAGE 28

WASTE MANAGEMENT PAGE 32

LIFT AND TURN PAGE 38

SINKS AND TAPS PAGE 52

FURNITURE HANDLES AND KNOBS PAGE 56

STORAGE SYSTEMS

MAKE YOUR

SPACE WORK

HARDER

Ensure all your ingredients

are close to hand.

Larder Units are ideal for

your favourite ingredients

to be organised and seen,

solving the problem of

groceries being lost and

forgotten at the back of

the cupboard.

STORAGE SYSTEMS

Larder Unit Storage

6

EMS

ge

Saphir

Premea Artline

Available Basket Designs for the

Häfele Storage SolutionsPlease check the possible combination with us

7

Tall Cabinet DUSA• Height adjustable baskets inside the cabinet and

at the door

• No additional load on cabinet hinges

• Front frame supported by additional roller guides

• In opened position rear baskets extend up to 11

cm in front of the main cupboard section

• Integrated soft closing

• Installation Dimensions: 1900 - 2150 mm

• Load capacity: Basket 20 kg; Slide 80 kg

Article No. Description

Cabinet width 450 mm

547.29.205 DUSA 6 / Saphir

547.29.305 DUSA 6 / Premea Artline


547.29.225 DUSA 6 / Saphir

547.29.325 DUSA 6 / Premea Artline

STORAGE SYSTEMS

Larder Unit Storage

8

Tall Cabinet HSA• Height adjustable baskets assembly using

functional clip, fi rm grip and low noise

• Full extension with soft closing

• Load capacity: Fully extendable unit 120 kg

Tall Cabinet HSA Rotary• Upon opening, the baskets can be turned either

to the left or right

• Providing easy front access to the baskets

• Load capacity: Fully extendable unit 120 kg



547.21.862 Height 1200 - 1450 mm

4 Baskets / Saphir

547.48.375 Height 1900 - 2150 mm

5 Baskets / Premea Artline

Cabinet width 400 - 450 mm

547.21.824 Height 1700 - 1950 mm

5 Baskets / Saphir

547.21.825 Height 1900 - 2150 mm

5 Baskets / Saphir


547.48.345 Height 1900 - 2150 mm


Optional accessories

547.23.298 Bottle Divider for 350 mm


Cabinet width 400 - 450 mm

547.22.935 Height 1900 - 2150 mm

5 Baskets / Saphir


547.46.235 Height 1900 - 2150 mm



547.46.255 Height 1900 - 2150 mm


©

9

Recorner Maxx• Corner cabinet solution with distinctly better use

of storage space

• Height adjustment for the shelves is fl exible

• Retrofi tting possible

• Load capacity: 50 kg/ set



542.62.522 Recorner Maxx 3/4

542.62.512 Recorner Maxx 4/4

Packing: 1 set includes 2 trays

©

Corner Unit Storage

STORAGE SYSTEMS

Corner Unit Storage

10

Slide Corner• The smart solution for corner cabinets that are

diffi cult to access

• The shelves can be pulled out separately

• The upper shelf can be assembled in various

heights

• Load capacity: 15 kg per shelf

Twin Corner• Allows optimal use of storage space in a corner

cabinet

• Easy access: a dual movement swings both

shelves out within grasp of the user



450 mm door width - Base cabinet

542.07.746 Slide Corner (2 tiers) for Left hand

542.07.745 Slide Corner (2 tiers) for Right hand

Optional Accessories

542.07.291 Centre Post


450 mm door width

542.08.246 Twin Corner (Left)

542.08.245 Twin Corner (Right)

500 mm door width

542.08.251 Twin Corner (Left)

542.08.250 Twin Corner (Right)

11

Wari Corner• Wari Corner is easily accessible due to its user-

friendly movement

• Upon opening, the front baskets automatically

swing away and leave free access to the inside

baskets

• Integrated soft closing

• Load capacity per basket: Front 5 kg;

Rear 12.5 kg


548.17.232 Wari Corner with Saphir basket

(Right)

548.17.233 Wari Corner with Saphir basket

(Left)

548.18.230 Wari Corner with Premea Artline

(Right)

548.18.231 Wari Corner with Premea Artline

(Left)

Base Cabinet DSA• Pull-out for 300 mm wide base cabinets

• The frame can be used on the left or right

• Height variable installation of the baskets with

secure locking device

• Full extension pull-out with soft closing

• Load capacity: 20 kg


546.39.996 Side Pull-out Unit

546.39.243 DSA Baskets, Saphir Chrome


546.35.299 Bottle Divider

Base Unit Storage

STORAGE SYSTEMS

Base Unit Storage

12

Base Cabinet Pull-Out K150• Pull-out for 150 mm wide cabinets

• Either with 2 fixed trays, towel holders or baking

tin holders

• Full extension with soft closing



Powder coated fi nish

545.12.961 Base Cabinet Pull-out -

2 Fixed Trays


Towel Holder


Baking Tin Holder


545.12.290 Bottle Divider


547.37.851 DSA Rotary (Left)

547.37.841 DSA Rotary (Right)

Base Cabinet DSA Rotary• Pull-out for 300 mm wide cabinets

• Height variable installation of the baskets with

secure basket locking



• 3 tiers basket

©

©

©

Harmonious kitchen arrangement

with DSA Rotary

Extended stove solution with

DSA Rotary

13


450 mm cabinet width

548.01.203 Front Pull-out Basket






548.01.999 Front Fastening Device, Left + Right

Set includes: 1 Basket and 1 Pair of runners.

Please order front fi xing accessories separately



548.01.213 Pull-out Basket


548.01.216 Pull-out Basket



Set includes: 1 Basket and 1 Pair of runners.

Front Pull-out Basket• The inner pull-out can be made into a front

pull-out by mounting the front attachment after

assembly


• Installation dimensions: Height - 145 mm basket

height/ 185 mm with guide

• Baskets: Chrome RAL 9006, Clear varnish


Pull-out Basket (For Hinged Door)• Full extension pull-out with soft closing

• Variant with spacing strip for installation behind a door

• Installation dimensions: Height 145 mm basket

height/ 160 mm with guide

• Basket/ Finish: Chrome RAL 9006, Clear varnish


STORAGE SYSTEMS

Base Unit Storage

14

Wall Unit Storage

Base Cabinet Base Liner• Full extension with soft closing

• Fitting for heights 600 - 800 mm


Wall Cabinet OSA• Wall pantry unit with automatic internal pull-out

• Installation dimensions: Height 500 - 700 mm

(Racks) Minimum cabinet width 460 mm



548.06.201 450 mm Cabinet width

548.06.203 600 mm Cabinet width



545.99.241 Wall Cabinet OSA Baskets Chrome

15

Under Sink Pull-out Storage

Article No. Dimension

545.48.262 247mm (W) x 495mm (D) x 507mm (H)


545.48.261 274mm (W) x 495mm (D) x 395mm (H)


545.48.260 161mm (W) x 495mm (D) x 395mm (H)

Pull-out with 2 hook in baskets• Version : Bottle basket can be taken out

• Load Capacity : 12kg

Pull-out with 1 hook in basket• Version : Bottle basket can be taken out


Pull-out with 2 hook in baskets and swing tray• Version : Bottle basket can be taken out, tray on top

can be swing from left to right


STORAGE SYSTEMS

Under Sink Pull-out Storage

16


545.48.248 202mm (W) x 432mm (D) x 440mm (H)


545.48.238 Internal carcass width 140 mm

545.48.239 Internal carcass width 240 mm

Article No. Carcass width Basket (W x D x H) mm

540.32.262 500mm 415 x 425 x 148

540.32.263 600mm 515 x 425 x 148

Cleaning agent extension, lockable• Material : Steel

• Finish : Chrome Plated

• Suitable for left and right hand use

Extension for under sink• Material : Steel

• Finish : Chrome Plated

• Dimension : 470mm (D) x 420mm (H)

• Extension length : 335mm


Pull Out Basket• Version : Runner and basket for internal pull out

with soft closing device

• Material : Stainless Steel

• Finish : Brush Polished


• Installation Depth : 500mm


17

Stainless Steel Rail• Material : Stainless steel with zinc alloy

rail holder

• Finish : Stainless steel polished

• Thickness: 1.2mm

Plate Organizer Racks• Shelf racks chromed

• Extensive use of the flat shelf

• Transparent collection tray

• Cabinet depth adjustable


Kitchen Railing Systems

• Material: Stainless steel

• Finish : Stainless steel polished


522.44.201 227 x 620 x 270 mm

Packing: 1 pc


522.44.220 162 x 450 x 370 mm

Packing: 1 pc


544.39.200 227 x 620 x 190 mm

Packing: 1 pc


522.44.210 227 x 620 x 190 mm

Packing: 1 pc


522.44.200 248 x 326 x 270 mm

Packing: 1 pc


522.44.181 ø16 x 600 mm

522.44.184 ø16 x 1000 mm

522.44.185 ø16 x 1200 mm

Packing: 1 pc


544.02.223 For cabinet width 600 mm

(564 mm inner width)

544.02.225 For cabinet width 900 mm

(864 mm inner width)

Plate Rack

Multipurpose Rack

DRAWER STORAGE SOLUTIONS

SMARTLY

INTEGRATED

STORAGE IDEAS

IDEAL FOR STORING ALL YOUR

COOKING ESSENTIALS AND UTENSILS

Organisation is the key

to a well run kitchen

and these drawer inserts

ensure that all your crucial

ingredients and cookware

are where you want

them to be.

DRAWER SYSTEMS

Individual Drawer Concepts

20

C

C

A

B

F

D

H

I

G

J

K

E

90° 90° 90°

New MOOVIT

Drawer System

• 2 trendy colours

• Extremely scratch-

resistant surface

• Soft and Self Closing

• Load bearing capacity

up to 50kg

• Tool free removeable

front panel for easy

cleaning

• Accessories to match

your design

NEW

21

Nominal length Article No./ Colour

Metalic White Metalic Grey

270mm 495.48.550 495.48.600

300mm 495.48.551 495.48.601

350mm 495.48.552 495.48.602

400mm 495.48.553 495.48.603

450mm 495.48.554 495.48.604

500mm 495.48.555 495.48.605

550mm 495.48.556 495.48.606

600mm 495.48.557 495.48.607

650mm 495.48.558 495.48.608

Packing: 1 set



270mm 495.48.650 495.48.700

300mm 495.48.651 495.48.701

350mm 495.48.652 495.48.702

400mm 495.48.653 495.48.703

450mm 495.48.654 495.48.704

500mm 495.48.655 495.48.705

550mm 495.48.656 495.48.706

600mm 495.48.657 495.48.707

650mm 495.48.658 495.48.708

Packing: 1 set

Length Article No./ Colour


For cabinet width 600 mm

488 mm 553.61.711 553.61.211


788 mm 553.61.715 553.61.215


488 mm 553.61.719 553.61.219

Packing: 1 pc

Article No./ Colour


553.61.792 553.61.292

Packing: 1 pair

Article No./ Colour


553.61.791 553.61.291

Packing: 1 pair

Order reference

Please order Moovit equipment side rail set and cross

rail set separately.

Moovit Matrix Drawer Set Moovit Matrix set consists of:

• 1 left and right drawer side with rear panel

holder

• 1 left and right cabinet rail

• 2 cover caps

• 2 fixing brackets

Internal Drawer/ Extension + +

Holder for Internal Drawer without Railing

Holder for Internal Extension with RailingPanel for Internal Drawer/ Internal Extension• For internal drawer and internal extension

• Material: Aluminium

• Height: 95 mm

Aluminium panel and plastic holder available in the colour of

drawer sides

• Panel holder for internal drawer

connects the drawer sides with

the panel

• Material: Plastic

• For internal extension, connects

the drawer sides with the panel

and railing



Drawer height 92 mm Drawer height 115 mm

Add-On System

DRAWER SYSTEMS


22

Convenient and economical expansion of storage space in 3 simple steps:

Moovit drawer set

Moovit Equipment Railing + +

Moovit with railing Moovit with add-on panel

Add-On System

Cross rail

Cross rail

Side Rail Set Panel Add-on Drawer Sides

• Material: Steel

• Nominal length: 1200 mm

• Finish: Powder coated

• Diameter: 11 mm


• Connecting piece for cross and side rail

• Railing: Steel

• Holder: Plastic

• Diameter: 11 mm

• Each set consists of:

2 x Rails with connection facility

2 x Front bracket for press fitting

2 x Front bracket for screw fixing

2 x Rear panel holder

• Material: Steel

• Installation: For clipping onto the

drawer side and railing

Article No./ Colour


553.59.734 553.59.234

Packing: 1 pc

Article No./ Colour


553.59.739 553.59.239

Packing: 1 pc



300mm 553.60.701 553.60.201

350mm 553.60.702 553.60.202

400mm 553.60.703 553.60.203

450mm 553.60.704 553.60.204

500mm 553.60.705 553.60.205

550mm 553.60.706 553.60.206

600mm 553.60.707 553.60.207

650mm 553.60.708 553.60.208

Packing: 1 pair



300mm 553.59.701 553.59.201

350mm 553.59.702 553.59.202

400mm 553.59.703 553.59.203

450mm 553.59.704 553.59.204

500mm 553.59.705 553.59.205

550mm 553.59.706 553.59.206

600mm 553.59.707 553.59.207

650mm 553.59.708 553.59.208

Packing: 1 set

23

Moovit Matrix Packages



553.48.715 553.48.705 Drawer side height 92 mm











Metalic White Metalic Grey Drawer side height 92 mm

553.48.891 553.48.881 For cabinet width 600 mm




Metalic White Metalic Grey Drawer side height 92 mm




Moovit Matrix set with single gallery

Moovit Matrix set with double gallery

Moovit Matrix set with add-on panel

Moovit Matrix internal drawer set

Moovit Matrix extended internal drawer set

DRAWER SYSTEMS


24

Cutlery Insert

Cutlery Insert

• Material: Translucent plastic with aluminium

edge

• Nominal length: 500 mm

• Side panel thickness 16 mm and 19 mm


• Height: 50 mm

• Side panel thickness 16 mm

• Inserts are matching the colour of the drawer sides

For cabinet width Article No./ Colour

White Green Dark Champagne

Translucent Translucent Translucent

300mm 553.65.721 553.65.021 553.65.821

400mm 553.65.723 553.65.023 553.65.823

450mm 553.65.724 553.65.024 553.65.824

500mm 553.65.725 553.65.025 553.65.825

600mm 553.65.727 553.65.027 553.65.827

800mm 553.65.728 553.65.028 553.65.828

900mm 553.65.729 553.65.029 553.65.829

1000mm 553.65.730 553.65.030 553.65.830

1200mm 553.65.731 553.65.031 553.65.831

Packing: 1 pc

For cabinet width Article No./ Colour

Metalic White Metalic Grey Champagne

300mm 553.63.741 553.63.241 553.63.841

350mm 553.63.742 553.63.242 553.63.842

400mm 553.63.743 553.63.243 553.63.843

450mm 553.63.744 553.63.244 553.63.844

500mm 553.63.745 553.63.245 553.63.845

550mm 553.63.746 553.63.246 553.63.846

600mm 553.63.747 553.63.247 553.63.847

800mm 553.63.748 553.63.248 553.63.848

900mm 553.63.749 553.63.249 553.63.849

1000mm 553.63.750 553.63.250 553.63.850

1200mm 553.63.751 553.63.251 553.63.851

Packing: 1 pc

Compartments and confi guration overview

Compartments overview

25


556.53.319 Divider, Self adhesive

Packing: 1 pc


556.53.310 For nominal length 500 mm,

for 4 knives

Packing: 1 pc

Divider• Material: Multiplex beech

• Finish: Lacquered

Knife Block• Material: Multiplex beech


Confi guration overview

Spice Jar with Glass Lid

• Suitable for spice jar insert

• Material: Glass - lead crystal


556.53.311 Length 500 mm, for 6 spice jars

556.53.312 Length 500 mm, for 12 spice jars

Packing: 1 pc

+ Spice Jar Insert• Material: Multiplex beech


• Hole diameter: 57 mm


543.95.100 Height with lid 58mm,

Diameter (bottom) 55mm

Packing: 1pc

Wooden Drawer Inserts

Extension Tray, Narrow

Extension Tray, Wide

• Material: Beech/ Stainless steel


• Connecting strips for drawer sides integrated

• Adjustment to suit cabinet width

• Height: 62 mm

• Width: 200 - 300 mm

• Height: 62 mm

• Width: 350 - 500 mm



Depth 480 mm

Packing: 1pc



Depth 480 mm

Packing: 1pc

A B C D E

F G H

I J

K

300 mm

550 mm

900 mm 1000 mm

1200 mm

600 mm 800 mm

350 mm 400 mm 450 mm 500 mm

1

2

3 4

DRAWER SYSTEMS


26



553.52.721 553.52.221 Side chassis (length 300 mm)

553.61.726 553.61.226 Faceplate with profi le (length 597 mm)

553.61.793 553.61.293 Faceplate holder (height 74 mm)


553.67.307 Perforated board insert 500 x 480 x 9 mm

553.67.323 Dividers 480 x 120 x 8 mm

553.67.390 Triangle Rack 160mm


556.81.573 3 pcs per set, White translucent


547.91.571 Dimension: 1000 x 590 mm, Grey

Under Sink Drawer• For use of space underneath the sink

• Height: 92 mm

Wooden Inserts for Drawer• Material: Beech MDF

• For cabinet width 600 mm

Adjustable Divider for Drawer• Material: Plastic

• Version: With rubber knob against slide

• Dimension: 235-387 x 235-387 mm

• Height: 130 mm

Anti Slide Sheet• Material: Polystyrene - Natural rubber

• Version: Self adhesive

27

Pull-out Fittings

Step Stool

• For temporary extension work top ideal for small

compact kitchen

• Load bearing capacity 30 kg

• With 2 steps 200 x 300 mm and non-slip

rubber threads


505.04.210 Stepstool (Silver/ Black)

505.04.419 Folding Bracket


505.70.200 Version without work top

Article No. Dim. mm Finish/ Colour

547.96.567 510 x 600 Mat: Silver coloured grained,

547.96.577 810 x 600 Rubber strips: Black

547.96.167 510 x 600 Mat: Maple effect,

547.96.177 810 x 600 Rubber strips: Silver coloured

547.96.767 510 x 600 Mat: Wenge effect,

547.96.777 810 x 600 Rubber strips: Black

Article No. Length

808.90.090 300 mm

Packing: 6 pcs

Insert mat with strips• Material : Plastic

• Version : Insert mat with non-slip rubber strips, can be cut

to fit any length and width

Protection rails for worktops• Heat resistant and self adhesive

• Material: Zinc Alloy

• Finish: Stainless steel

Silver coloured

grained

Maple effect Wenge effect

IRONING BOARD

SPACE

SAVING

IDEAS

FOLD AWAY ACCESSORIES

These unique solutions allow you to fold

away kitchen utilities when they are not

in use, taking up minimal storage.

IRONING BOARD

Neat Space Saving Ideas

30

Ironfi x Pull-out ironing board

Ironfi x Foldaway ironing board

• Suitable for use with Moovit drawer side runner system

• Collapsible

• Material: Steel and aluminium

• Finish/ Colour: Plastic coated, grey

• With turning mechanism; swivel range 180°

• Can be locked in left, right or inclined position

• Material: Fitting parts: Steel

• Finish/ Colour: Fitting parts: Plastic coated, white


568.60.964 Ironing Board


568.66.700 Ironing Board

568.66.790 Hood

Internal drawer

width B Min. 498 mm Min. 406 mm Min. 506 mm

Internal drawer

opening depth T Min. 435 mm Min. 500 mm Min. 320 mm

Dim. H - Max. 155 mm Max. 155 mm

Dim. Y Min. 59 mm Min. 150 mm Min. 57 mm

Dim. X Min. 153 mm Min. 182/32 mm Min. 277/37 mm

(left/right) (left/right)

Overlay U Max. 38 mm Max. 25 mm Max. 38 mm

326

185950

300985

525

Covering hood

31

Ironfi x Built-in ironing board

Ironfi x Built-in lateral ironing board

• For installation in the drawer space of most standard base

cabinets

• When the drawer is opened the supports automatically extend

• Internal cabinet width required: 362-500mm

• Minimum cabinet depth required: 500 mm

• Material: Fitting parts: Steeel


• For installation in the drawer space of most standard base

cabinets

• Ironing board folds out, swivels 180° and can be positioned at

15° stages

• Internal cabinet width required: 520 mm

• Internal cabinet depth required: 350 mm

• Internal cabinet height required: 125 mm

• Material: Fitting parts: Steel



568.60.710 Ironing Built-in ironing board with cover


568.60.780 Ironing Built-in lateral ironing board

952

298.5

950

300

Simply pull the drawer open and

unfold the ironing board

WASTE MANAGEMENT

STYLISH

AND

COMPACT

CRUSH YOUR RECYCLING

TO A FIFTH OF ITS SIZE

Hygienic and effi cient recycling.

Being responsible to the

environment is important

for everyone and, what

with recycling becoming

mandatory in many

communities, it is crucial

to make recycling as

easy and time effi cient as

possible within the home.

WASTE MANAGEMENT

Tidy and Comfortable Disposal Solutions

34

Öko Liner Waste Solution System• Fast installation via built-in drilling template for slides

• Extendable, double powder-coated metal cover with

protective enamel

• With solt closing

• For 450 and 600 mm wide cabinets; more dimensions

available on request


503.04.514 Öko Liner for cabinet width 450 mm

With 2 x 21 Litre bins

503.04.507 Öko Liner for Cabinet width 600 mm

With 2 x 10 Litre and 1 x 22 Litre bins

35

Double Waste Bin, 2 x 15 Litre

Double Waste Bin,

1 x 19 Litre, 1 x 30 Litre

Single Waste Bin, 15 Litre



• For cabinet width from 300mm

• Full extension (Ball bearing slides)

• Bracket: Steel plastic coated grey

• Installation: Screw fixing to bottom



• Bracket: Steel plastic coated grey



• For left and right hand door mounting

• Installation: Screw fixing to side panel



• Bracket and extension: Steel



• Finish: Galvanized bin (fire-retardant)

• For left and right hand door mounting

• Installation: Screw fixing to side and front panel


502.70.252 Bin & Lid: Plastic Grey


502.70.522 Bin & Lid: Plastic Grey


502.12.023 Housing: Stainless steel

Bin: Light grey plastic

Lid: White plastic


502.70.520 Bin & Lid: Plastic grey


502.23.062 Housing: Stainless Steel,

Bin: Steel Galvanized

Lid: Aluminium polished

502.23.740 Housing: Steel, Plastic coated white,

Bin: Dark grey plastic;

Lid: Aluminium polished

WASTE MANAGEMENT

Tidy and Comfortable Disposal Solutions

36

SPACEBOY, 35 Litre

BASEBOY, 15 Litre

Material: Powder Coated Steel/ Stainless Steel

Dimension: 970 x 415 mm



Article No. Finish

502.95.960 Red

502.95.260 New Silver

502.95.460 Almond

502.95.961 Orange

Article No. Finish

502.95.950 Red

502.95.051 Stainless Steel

502.95.951 Orange

37

KICKBOY CLASSIC LINE, 40 Litre

KICKMASTER, 33 Litre





Article No. Finish

502.95.970 Red

502.95.971 Orange

Article No. Finish

502.95.780 White

502.95.280 New Silver

502.95.180 Brown Chocolate

502.95.380 Black

LIFT AND TURN

IDEAS

IN MOTION

REDEFINED

With their modern design, the Häfele family

of fl ap fi ttings combine elegance and

fl exibility whilst retaining their comfort and

smooth functionality during use. Able to

integrate into the bathroom, home offi ce

and for niche applications.

LIFT AND TURN

Soft Closing Flap Fitting and Door Hinges

40

Free Flap 1.7

Adapter

Opening angle restraint

• For small, one-piece flaps made of wood or with aluminium frame

• 107º opening angle (can be reduced to 90º using opening angle

restraint, shown below)

• Flap locks into any position

• Integrated soft close

• Height, side and tilting angle adjustment of front ±1.5 mm holding

power

• Material: Fitting - Steel; Cover cap - Plastic

• Finish: Fitting - Nickel plated; Cover cap - Grey or White

• For flaps with 20 mm aluminium frame

• For left or right hand use

• Material: Zinc alloy

• For limiting opening angle of 107° to 90°

Model

Flat height

250 mm

275 mm

300 mm

325 mm

350 mm

375 mm

400 mm

Article No. Finish

372.91.599 Nickel plated

Article No. Finish

372.91.499 Plastic

Model Grey White

A 372.91.320 372.91.720

B 372.91.321 372.91.721

C 372.91.322 372.91.722

A

1.3-3.8

1.2-3.3

1.1-3.1

1.0-2.8

0.9-2.6

0.9-2.3

0.8-2.1

B

2.9-6.4

2.5-5.7

2.4-5.1

2.1-4.6

2.0-4.2

1.9-3.8

1.7-3.6

C

5.4-11.8

4.8-10.6

4.4-9.6

4.0-8.8

3.7-8.1

3.5-7.5

3.2-7.0

Flap weight kg

Sample measurements table for max. fl ap weight

Front panel thickness Y mm

16 mm 19 mm 22 mm 26 mm 28 mm

Distance X mm (with top panel thickness 16 mm)

83 mm 74 mm 64 mm 52 mm 46 mm

41

Free Flap 3.15

Adapter

• For flap height 400 - 600 mm

• For large, one-piece flaps made of wood or with aluminium frame

• 90º or 107º opening angle (adjustable on fitting)


• Height, side and tilting angle adjustment of front ±1.5 mm holding

power

• Material: Fitting - Steel; Cover cap - Plastic

• Finish: Fitting - Nickel plated; Cover cap - Grey or White




Model

Flat height

400 mm

425 mm

450 mm

475 mm

500 mm

525 mm

550 mm

575 mm

600 mm

Article No. Finish


Model Grey White

D 372.91.330 372.91.730

E 372.91.331 372.91.731

F 372.91.332 372.91.732

G 372.91.333 372.91.733

D

4.7-9.6

4.4-9.0

4.1-8.4

3.9-8.0

3.7-7.5

3.5-7.1

3.3-6.8

3.2-6.5

3.0-6.2

E

5.9-12.4

5.6-11.6

5.2-10.9

4.7-10.3

4.7-9.7

4.4-9.2

4.2-8.8

4.0-8.4

3.8-8.0

F

8.9-18.6

8.3-17.4

7.8-16.3

7.4-15.4

7.0-14.6

6.6-13.9

6.3-13.2

6.0-12.5

5.7-12.0

G

11.8-23.3

11.0-21.8

10.4-20.5

9.8-19.3

9.2-18.3

8.8-17.3

8.3-16.5

8.0-15.6

7.6-15.0

Flap weight kg

Sample measurements table for max. fl ap weight

Front panel thickness Y mm

16 mm 19 mm 22 mm 26 mm 28 mm

Distance X mm (with top panel thickness 16 mm)

83 mm 74 mm 64 mm 52 mm 46 mm

LIFT AND TURN


42

Maxi fl ap fi ttings

Maxi push-to-open Maxi handle mounting

• For flaps made of wood, glass or with aluminium frame

• Can be used on one or both sides (depending on the size of the

flap)

• Holding power can be adjusted individually to respective flap

weight

1. For particularly wide and heavy fronts with handle

2. Flap locks reliably in any position

3. Mounting in series drilled holes 32 mm (edge distance 37 or 28 mm)

4. Application in combination with concealed hinges with or without

automatic closing spring

5. Optional soft closing mechanism possible (recommended)

1. Slight pressure on the front opens the flap completely to the end

position

2. Application in combination with Duomatic Push concealed hinges

3. Flap is held closed by magnetic door catch and counterplate on the

front panel

4. Additional magnets for holding the flap closed (optional)

• The weight specification applies to one Maxi fitting. When using two Maxi fittings the flap weight values double

• Two Maxi fittings must be installed for flap widths of 600 mm and above

Holding power adjustment with SW10 Allen key (Cat. No. 008.28.100)

Opening angle 90°

> For use in combination with Duomatic Push hinges and magnetic

catches

Opening angle 90°

> Optional soft closing mechanism

Note:

Use numbers 1-8 for adjusting the holding power.

Use numbers 9-12 to re-adjust flap after a certain time (if necessary).

Cabinet heightmm

Flap weight kg

Model A Model B Model C Model D

1.7-2.4 3.1-4.6 3.8-7.0 5.8-9.8

- 2.4-3.7 3.1-5.5 4.2-7.1

- 1.6-2.9 2.6-4.5 3.4-5.8

- 1.5-2.4 2.1-3.6 2.9-4.8

- 1.2-2.1 1.5-3.2 2.5-4.0

- - 1.3-2.9 2.2-3.8

- - 1.1-2.6 1.9-3.3

- - - 1.6-3.0

300

400

500

600

700

800

900

1000

Cabinet heightmm

Flap weight kg

Model A Model B Model C Model D

3.0-5.3 5.1-10.2 9.1-15.8 11.9-20.8

2.3-4.0 3.8-7.6 6.9-11.9 8.9-15.6

1.8-3.2 3.1-6.1 5.5-9.6 7.2-12.5

1.5-2.7 2.6-5.1 4.6-7.9 6.0-10.4

1.3-2.2 2.1-4.2 3.8-6.6 4.9-8.7

1.1-2.0 1.9-3.9 3.4-5.9 4.4-7.8

1.0-1.8 1.7-3.4 3.0-5.2 3.9-6.9

0.6-1.6 1.5-3.0 2.7-4.7 3.6-6.2

300

400

500

600

700

800

900

1000

43

Soft-closing mechanism

Push magnetic door catch, for concealed fi xing

• For edge distance 37 mm


• For use with Maxi Touch opening 3675

• With magnet for holding in closed position

• For mounting in drilled hole in cabinet top or base, or with adapor housing shown below


• Colour: beige

• Opening angles: 75°, 90° or 110°

• With power assisted opening

• Unhanded design

• Clip-mounting or pre-mounted screw fixing brackets included, no tools required

• Installation instructions included

• Height ±2 mm, side +3/-1 mm, tilt ±1.5 mm and holding power adjustment with SW10 Allen key facility

• Nickel-plated zinc alloy lid stay, nickel-plated steel screw-fixing brackets, plastic hinge cover and adjusting

screw

• Material: Stay: Zinc alloy

Mounting and screw on bracket: Steel

Cover cap for adjusting screw: Plastic

• Finish : Stay: Nickel plated, white or black

Mounting and screw on bracket: Nickel plated, white or black

Finishes -

Black, nickel

coloured or

white

Overview of

colour designa-

tion - (Adjusting

screw) for dif-

ferentiating the

models “A”, “B”,

“C” and “D”

1

23

4

567

89

10

1112

325

4020

4545

32

19.532

Wooden lid flap

5.5

16

Lid flap with aluminium frame

Model

A

B

C

D

A

B

C

D

Distance from

edge

37 mm

37 mm

37 mm

37 mm

37 mm

37 mm

37 mm

37 mm

White

373.69.742

373.69.744

373.69.746

373.69.748

-

-

-

-

Black

373.69.342

373.69.344

373.69.346

373.69.348

-

-

-

-

Nickel-

plated

373.69.512

373.69.412

373.69.712

373.69.312

373.69.502

373.69.402

373.69.702

373.69.302

Wooden fl aps and fl aps with aluminium frame,

from frame width 45 mm

Flaps with aluminium frame, frame width 20 mm

Article No. Installation

356.06.401 Counterplate for knocking in

356.06.402 Counterplate for glue fi xing

Article No. Finish


3 .5

LIFT AND TURN


44

Counterplate for knocking in Duo Standard/ Forte

Counterplate for knocking in

• Material: Steel

• For screw fixing to cabinet top or base


• Colour: Beige

Finishes - Black,

nickel-coloured

or white

• Opening angles: 75°, 90°, 100°

• Unhanded design

• For use with wooden lids or lids with aluminium frames, also suit

able for use as flap stay

• For flaps with aluminium frame width 20 or from 45 mm

• With braking and locking mechanism, can be adjusted using an

SW4 hex key

• Self closing function

• Clip-mounting on pre-mounted screw fixing brackets, no tools

required

• Height, side and tilting angle adjustment of front ±1.5 mm

holding power

• Nickel-plated steel, cover caps: grey or white plastic

• Material: Stay: Zinc alloy

Bracket: Steel

• Finish : Stay: Nickel plated, white or black

Article No. Finish

246.08.910 Galvanized

Article No.

356.06.410 With positioning aid

356.06.420 Without positioning aid

With positioning aid

48 2.5

13.550 32

4.5

7

With positioning aid

48 2.5

13.550 32

4.5Without positioning aid

Holding power adjustment with SW4 Allen key (Cat. No. 008.28.241)

Stronger holding power= locking function= flap locks in any position

(multi-position stop)

Weaker holding power= braking function= lid stay closes softly/flap stayopens gently

Min. 135

Lateral space requirement/side distance (S) for screw-on bracket

Minimum installation depth

Duo Standard

S12

25

Min. 172

Duo Forte

45

Duo Standard fl ap/lid stay

Note:

When used as a flap stay, a magnet has to be fitted with an installation

height of 189 +32 mm and an outreach of 160 +32 mm

Light version - min. installation depth 130 mm

Maximum flap weight (kg)

Function locking Function braking Flap height

1 stay 2 stays 1 stay 2 stays

For opening angle 75º

0.515.110.510.9002

0.510.90.510.7052

0.515.70.210.6003

0.315.60.010.5053

5.110.60.95.4004

0.010.50.80.4054

0.95.40.75.3005


0.515.90.515.7002

0.515.70.210.6052

0.310.60.010.5003

0.115.55.80.4053

0.010.50.75.3004

5.80.45.65.3054

0.80.40.60.3005


0.510.80.210.6002

0.210.65.90.5052

0.010.50.80.4003

0.90.40.70.3053

5.70.40.60.3004

0.75.30.55.2054

0.60.30.50.2005

3 .5 5

Distance from

edge

37 mm

37mm

White

373.66.262

-

Black

373.66.212

-

Nickel-

plated

373.66.612

373.66.622

For wooden lids/ lids with aluminium frame,

frame width from 45 mm

For lids with aluninium frame, frame width from 20 mm

For sheet metal screws

Table showing maximum flap weight

Standard version shown

SW4

32132

75º32

160

28/37

19

19 90 32

90º

32

28/37

160

32

9219

110º

32

28/37

128

32

135

32110<400

28/37

90º

28/37

90º32

32141Max. 400

95

LIFT AND TURN


46

Duo Forte fl ap/lid stay

Lid stay, heavy version

Opening angle Dim. A Dim. C

75º 224 mm 212 mm

90º 192 mm 182 mm

110º 160 mm 161 mm

Forte version shown

19 32

90º32

28/37

192

166

19

32

75º

32

28/37

224

196

28/37

32

90º32

Max. 600160

189

Installation as flap stay

Separate catch required

32

19

32110º

138

167

32

90º

32

28/37

Max. 600197

144

No separate catch required.Space required for fittinginside the cabinet when theflap is being closed:175 mm from front edge of cabinet

Maximum flap weight (kg)

Function locking Function braking

Flap height 1 stay 2 stays 1 stay 2 stays


0.510.510.510.41002

0.510.510.515.11052

0.510.210.510.9003

0.510.110.510.8053

0.510.90.410.7004

0.510.85.210.6054

0.510.70.115.5005

0.315.60.010.5055

0.210.65.90.5006

0.115.55.80.4056

5.010.50.80.4007


0.510.510.510.21002

0.510.210.515.9052

0.510.010.510.8003

0.510.95.310.7053

0.510.80.210.6004

0.410.70.110.5054

0.210.65.90.5005

0.115.55.80.4055

0.010.50.80.4006

5.90.50.75.3056

0.90.40.70.3007


0.515.210.515.9002

0.510.010.515.7052

0.510.85.215.6003

0.410.70.115.5053

5.210.65.95.4004

0.115.55.80.4054

0.010.55.70.4005

0.90.40.75.3055

0.80.40.60.3006

5.70.45.50.3056

0.75.30.50.3007

3 .5 5

Heavy version - min. installation depth 175 mm

Table showing maximum flap weight

Distance from

edge

37 mm

37mm

White

373.66.372

-

Black

373.66.312

-

Nickel-

plated

373.66.632

373.66.642

For wooden lids/ lids with aluminium frame,

frame width from 45 mm

For lids with aluninium frame, frame width from 20 mm

For sheet metal screws

47

Senso Double fl ap lift up fi tting

K

96

3732

H

30

31

32

D13.5

>160

2**

R*

20

5

30

K

2** = Adjustable when usingadjustable connecting hinge

Opening angle

V

U

W

T

• For two-piece flaps - wood or with aluminium frame from 45 mm

• Height and side adjustment ±3 mm, holding, opening and centre

pull adjustment facility

• Material: Fitting: Plastic, Aluminium,

Cover cap: Plastic

• Finish/ Colour: Fitting: Silver coloured anodized

Cover cap: Grey

Flap Angle D H R T U V W

height

550 mm 101º 57.5 290 63.5 70 139 192 390

600 mm 101º 73.5 326 79.5 70 130 170 405

650 mm 103º 67.5 340 73.5 95 160 220 425

720 mm 102º 75.5 378 81.5 96 207 261 456

800 mm 100º 71.5 392 77.5 85 255 260 500

865 mm 102º 47.5 400 53.5 120 260 315 525

Installation dimensions (mm)

Flap height Flap weight Complete Set

540-580 mm 3.0-6.5 kg 372.64.601

6.0-12.0 kg 372.64.602

9.0-18.0 kg 372.64.603

12.0-24.5 kg 372.64.604

580-640 mm 3.0-6.0 kg 372.64.611

6.0-11.0 kg 372.64.612

9.0-17.0 kg 372.64.613

12.0-23.0 kg 372.64.614

640-700 mm 3.0-5.0 kg 372.64.621

5.0-10.0 kg 372.64.622

8.0-16.0 kg 372.64.623

10.5-21.5 kg 372.64.624

700-780 mm 3.5-5.5 kg 372.64.631

5.0-9.0 kg 372.64.632

7.0-15.0 kg 372.64.633

9.0-20.0 kg 372.64.634

780-840 mm 5.0-9.0 kg 372.64.642

7.0-13.0 kg 372.64.643

9.0-17.0 kg 372.64.644

840-900 mm 5.0-12.0 kg 372.64.653

7.5-16.0 kg 372.64.654

LIFT AND TURN


48

49

32

30

14

1476

Drilling pattern

8

453220

Ø4M4

20

Finger protection

To avoid injuries the hinge comesapart when fingers get trapped unintentionally in the gap of the flap

Adapter for aluminium profi le

Connecting hinge Strato parallel lift up front fi tting

• For wooden flaps and flaps with aluminium frame, from frame width

20 mm

• 3-way adjustment: ± 2 mm side adjustment, -1 to +2 mm gap

adjustment, ± 1.5 mm depth adjustment

• With finger protection function


• Finish: Nickel plated

• For one-piece flaps made of wood or with aluminium frame


• Height and side adjustment ±3 mm, tilt, holding power and

opening angle adjustment facility

• Requires 1x cross bar

• Material: Fitting: Plastic, aluminium

Cover cap: Plastic


Cover cap: Grey

• For screw fixing to screw-on bracket 372.64.991

• For right and left hand use


segnih fo .oNhtdiw rood roF

2mm 006 otpU

3/2mm 008-006 neewteB

3mm 008 revO

Quantity of hinges required

Article No. Installation

372.64.796 Chipboard screws

Article No. Finish


96

3240

V32

168

Min. 13855

323232

15.5

Y

K

W 21

S

Min. 33

X D

28

Min. 2

61

T

R

U

H

49

Cross bar

• For connecting both fitting components

• Side panel thickness W: 16/19 mm

Suitable for fl ap width Length Article No.

600 mm 477 mm 372.67.983

900 mm 777 mm 372.67.985

1200 mm 1077 mm 372.67.987

1500 mm 1377 mm 372.67.989

1800 mm 1677 mm 372.67.990

Flap X Y D H K R S T U V

height

342- 342 186 308 295 205 28 0.8 338 200 50

420 350 186 308 295 205 38 0.8 346 200 50

420 186 308 295 205 98 0.8 416 200 50

420- 420 255 380 395 271 5 1.2 414 265 37

500 450 255 380 395 271 35 1.2 444 265 37

500 255 380 395 271 85 1.2 494 265 37

500- 500 293.5 420 450 312.5 30 1.3 494 295 37

550 550 293.5 420 450 312.5 80 1.3 544 295 37

550- 550 313.5 440 480 332.5 50 1.3 544 315 37

650 600 313.5 440 480 332.5 100 1.3 594 315 37

600 313.5 440 480 332.5 150 1.3 644 315 37

Installation dimensions (mm)

Flap height Flap weight

342-420 mm 1.5-4.0 kg 372.68.831

4.0-7.2 kg 372.68.832

6.5-11.5 kg 372.68.833

420-500 mm 2.0-3.5 kg 372.68.801

3.5-7.0 kg 372.68.802

6.5-11.0 kg 372.68.803

8.0-16.0 kg 372.68.804

500-550 mm 3.8-10.0 kg 372.68.813

6.0-15.0 kg 372.68.814

550-650 mm 3.5-10.0 kg 372.68.823

6.0-14.5 kg 372.68.824

Article No.

Adapter




Article No. Finish


LIFT AND TURN


50

Verso swing up front fi tting

• For one-piece flaps made of wood or with aluminium frame

• Height and side adjustment ±3 mm, tilt, holding power and

opening angle adjustment facility

• Requires 1x cross bar

• Material: Fitting: Plastic, Aluminium

Cover cap: Plastic


Cover cap: Grey

168

40

96

37

32

32>13855

323232

255

15.5 61

K

28>33

>138

380

95

110

275

K

280

365

255

450

325

535

575

495

410

794

744694

644594

544494

444414

5540

1515

65

120145

40

Installation

Model A B C D

Flap height Flap weight (kg)

420-550 mm 2.0-4.0 4.0-8.0 6.0-10.0 8.0-17.0

550-650 mm 2.0-3.5 3.5-7.0 6.0-10.0 9.0-16.0

650-800 mm - 3.0-6.5 5.0-10.0 9.0-15.0

Sample measurements table for max. flap weight

Model Article. No.

A 372.67.801

B 372.67.802

C 372.67.803

D 372.67.804

Cross bar

• For connecting both fitting components

• Side panel thickness W: 16/19 mm

Suitable for fl ap width Length Article No.

600 mm 477 mm 372.67.983

900 mm 777 mm 372.67.985

1200 mm 1077 mm 372.67.987

1500 mm 1377 mm 372.67.989

1800 mm 1677 mm 372.67.990

51

• Door height: 1,200 mm

• Door width: 600 - 1,500 mm

• With integrated soft closing

• Door height: 1,200 mm

• Door width: 600 - 1,500 mm

• With integrated soft closing


406.11.201 For 2 doors


406.11.221 For 2 doors

Vorfront Wooden Sliding Door Fittings for

Base Units

Flatfront Wooden Sliding Door Fittings for

Wall Units

Adapter




Article No. Finish


SINKS AND TAPS

Being one of the most frequently used

areas in the kitchen, select your sink wisely

by also keeping in mind that a sink cannot

be exchanged so easily.

DISHWASHING

AT ITS

BEST

SINKS AND TAPS

Solid and Contemporary Sink and Faucet Combinations

54

• Material: Stainless steeel 304

• Finish: Satin

• Thickness: 1.2mm

• Inner corner with 10° radius

• 3 1/2” basket strainer, 1 1/2” Odour trap


567.40.090 540 x 510 x 200 mm


567.43.070 1000 x 470 x 200 mm


567.43.140 567 x 430 x 220 mm


567.43.150 740 x 430 x 220 mm


567.40.080 820 x 510 x 200 mm

Top Mount Single Bowl

Undermount Single Bowl





567.24.010 485 x 485 x 180 mm


567.20.020 1020 x 500 x 180 mm


567.20.040 505 x 505 x 180 mm


567.20.030 820 x 500 x 180 mm

Top Mount Single Bowl Top Mount Single Bowl



5555


485.61.002 Counter mounted


485.61.003 Wall mounted


495.50.002 Pre-rinse spray with

swivel sprout


485.61.004 Counter mounted


589.21.033 Zeta Sink Mixer


589.04.335 Cold and hot water

mixer


485.61.005 Wall mounted


589.22.034 Mixer Faucet


566.44.320 Cold and hot water

mixer

Cold Water Tap

Mixer

• Material: Stainless Steel

• Material: Brass

• With mixer for temperature

• With connection hose 450 mm and 3/8”

nut for easy installation

• Swivel sprout 180°• Material: Brass

• With connection hose 1/2”

• Material: Brass

• With connection hose 1/2”

• Swivel sprout 360°

FURNITURE HANDLES AND KNOBS

All the little and big helpers behind the cabinet doors do make a functional kitchen.

A nice handle or knob gives your kitchen the fi nal look. Get an insight of what can really

change the appearance of your kitchen.

GREAT

TO

OPEN

FURNITURE HANDLES AND KNOBS

For Great Looks And Openings

58

Article No.

110.34.706

110.34.707

110.34.306

110.34.307

Article No.

110.34.216

110.34.217

110.34.616

110.34.617

Article No.

106.69.276

106.69.277

106.69.676

106.69.677

Article No.

110.34.291

110.34.294

110.34.296

110.34.691

110.34.694

110.34.696

110.34.091

110.34.094

110.34.096

Article No.

110.34.271

110.34.274

110.34.277

110.34.279

110.34.671

110.34.674

110.34.677

110.34.679

Article No.

110.34.286

110.34.287

110.34.686

110.34.687

110.34.786

110.34.787

110.34.386

110.34.387

Article No.

110.34.236

110.34.238

110.34.636

110.34.638

110.34.337

110.34.339

110.34.336

110.34.338

Article No.

110.34.227

110.34.627

110.34.328

110.34.327

Article No.

110.35.276

110.35.279

110.35.676

110.35.679

110.35.776

110.35.779

110.35.376

110.35.379

Dim.

mm

170x28

202x28

170x28

202x28

Dim.

mm

196x30

228x30

196x30

228x30

Dim.

mm

172x34

204x34

172x34

204x34

Dim.

mm

42x40

106x40

170x40

42x40

106x40

170x40

42x40

106x40

170x40

Dim.

mm

40x24

104x24

199x24

263x24

40x24

104x24

199x24

263x24

Dim.

mm

180x28

212x28

180x28

212x28

180x28

212x28

180x28

212x28

Dim.

mm

180x26

244x26

180x26

244x26

180x26

244x26

180x26

244x26

Dim.

mm

215x30

215x30

215x30

215x30

Dim.

mm

220x30

380x30

220x30

380x30

220x30

380x30

220x30

380x30

Hole

centres.

mm

160

192

160

192

Hole

centres.

mm

160

192

160

192

Hole

centres.

mm

160

192

160

192

Hole

centres.

mm

32

96

160

32

96

160

32

96

160

Hole

centres.

mm

32

96

192

256

32

96

192

256

Hole

centres.

mm

160

192

160

192

160

192

160

192

Hole

centres.

mm

128/160

192/224

128/160

192/224

128/160

192/224

128/160

192/224

Hole

centres.

mm

160/192

160/192

160/192

160/192

Hole

centres.

mm

160

320

160

320

160

320

160

320

Finish

White,

matt

Black,

matt

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Iron

coloured,

used look

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Finish

Chrome plated,

polished

Nickel plated,

brushed

White, matt

Black, matt

Finish

Chrome plated,

polished

Nickel plated,

brushed

White, matt

Black, matt

Finish

Chrome plated,

polished

Nickel plated,

brushed

White, matt

Black, matt

Finish

Chrome plated,

polished

Nickel plated,

brushed

White, matt

Black, matt


59

Article No.

106.69.267

106.69.268

106.69.667

106.69.668

Article No.

106.69.205

106.69.207

106.69.605

106.69.607

Article No.

110.35.281

110.35.286

110.35.681

110.35.686

Article No.

106.69.237

106.69.637

Article No.

110.35.271

110.35.671

110.35.771

110.35.371

Article No.

106.69.257

106.69.247

106.69.657

106.69.647

Article No.

106.69.217

106.69.617

106.69.227

106.69.627

Article No.

110.34.265

110.34.266

110.34.267

110.34.665

110.34.666

110.34.667

Article No.

110.34.255

110.34.257

110.34.655

110.34.657

110.34.356

110.34.358

110.34.355

110.34.357

Dim.

mm

227x35

355x35

227x35

355x35

Dim.

mm

148x32

212x32

148x32

212x32

Dim.

mm

80x24

220x24

80x24

220x24

Dim.

mm

201x32

201x32

Dim.

mm

31

31

31

31

Dim.

mm

218x32

218x32

218x32

218x32

Dim.

mm

202x30

202x30

202x30

202x30

Dim.

mm

146x28

178x28

210x28

146x28

178x28

210x28

Dim.

mm

172x32

204x32

172x32

204x32

172x32

204x32

172x32

204x32

Hole

centres.

mm

192

320

192

320

Hole

centres.

mm

128

192

128

192

Hole

centres.

mm

32

128/160

32

128/160

Hole

centres.

mm

192

192

Diameter

mm

20

20

20

20

Hole

centres.

mm

192

192

192

192

Hole

centres.

mm

192

192

192

192

Hole

centres.

mm

128

160

192

128

160

192

Hole

centres.

mm

128/160

160/192

128/160

160/192

128/160

160/192

128/160

160/192

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Finish

Chrome

plated,

polished

Stainless

steel

coloured

Finish

Chrome

plated,

polished

Nickel

plated,

brushed

Finish

Chrome plated,

polished

Nickel plated,

brushed

White, matt

Black, matt

Finish

Chrome plated

polished, white

Chrome plated

polished, black

Nickel plated

brushed, white

Nickel plated

brushed, black

Finish

Chrome plated

polished, white

Nickel plated

brushed, white

Chrome plated

polished, black

Nickel plated

brushed, black

Finish

Chrome plated,

polished

Nickel plated,

brushed

Finish

Chrome plated,

polished

Nickel plated,

brushed

White,

matt

Black,

matt


• Material: Aluminium

www.hafele.com.my

Häfele Malaysia Sdn Bhd

KL Head Office & Showroom

No. 18, Jalan Juruhebah U1/50. Seksyen U1, Temasya Industrial Park, 40150 Shah Alam, Selangor, Malaysia

Tel: +603 5569 2526 | Fax: +603 5569 3526 | Email: [email protected]

Sabah Office & Showroom

Lot 5 & 7, Ground Floor, Wisma KKM, MIle 5, Jalan Tuaran, 88450 Kota Kinabalu, Sabah, Malaysia

Tel: +6088 380 533 | Fax: +6088 386 533 | Email: [email protected]

732.99.00036

Specifications are subject to change without prior notice.

Published by Häfele (Malaysia) Sdn Bhd

March 2014

all for an ideal kitchen - häfelehafele.com/my/en/documents/hma_kichen_2014.pdf · your recipe for...

Documents