all prices are in us dollars and are subject to …

CONTACT US

ALL PRICES ARE IN US DOLLARS AND ARE SUBJECT TO CHANGE WITHOUT NOTICE

PLACING ORDERS

Clarus products are sold through authorized dealers only.

WARRANTY

Gordon J. Gow Technologies, Inc. warrants products to be free from defects in workmanship or materials.

Discontinued items, promotional products, and built to order cables are non-returnable. Products returned for credit must be pre-approved and are subject to a 20% re-stocking fee.

www.claruscable.comEmail: [email protected]

Fax: 800-553-1366

US Dealer Price List Terms and Conditions

All returns are subject to approval by Clarus & require a RMA number before the product may be returned.

RETURNS

Gordon J Gow Technologies, Inc.Clarus®6448 Pinecastle Blvd. Suite 101

Phone: 888-554-2514

Orlando, FL 32809

CLARUS® Retail Price List 2 November 1, 2019

http://www.claruscable.com/

mailto:[email protected]

4-5

6

7

8

9

10

11

12

13

14

15

High Current Power Cables 16

20Amp High Current Power Cables 17

18

19

20

20

This pricelist supersedes all previous pricelists.

Sign

Duet Power Block

Boxes

Blalanced Audio

Speaker Jumper Cables

Signal Ended Audio Subwoofer Cables

Product Design

Power Products

EFFECTIVE November 1, 2019

Concerto Power Conditioner

Pop Materials

Introduction

Digital Audio

Audio Cables

Speaker Interconnect CablesSpeaker Cables

AES EBU Digital AudioUSB Digital AudioDigital Coax Audio

AC Power Cables

Bi-Wire Speaker Cables


SRP

1,700.00 840.00

1,925.00 960.00

2,150.00 1,080.00

2,375.00 1,200.00

2,825.00 1,440.00

3,275.00 1,680.00

450.00 240.00

SRP

3 meter

4 meter

CCB

LENGTH

Multiple Solid Bass Conductors

Single Flat for Midrange

All Conductors Insulated

Triple Shield Lifted at Sink

PCCC - 20 AWG

Triple balanced

Two Heavy Solid Bass Conductors



Double Shield Lifted at Sink

Multiple Spiral Ribbon for Highs Multiple Spiral Ribbon for Highs

CAB

0.5 meter

PCCC - 16 AWG

Triple Balanced

per addtl meter

1 meter

1.5 meter

2 meter

CRIMSON AQUA

Crimson and Aqua Balanced Audio cables were designed exclusively for Clarus by Jay Victor using a triple balanced

geometry, dedicated conductors for the positive, negative and ground connections all surrounded by an independent

protective layer of Aluminum/Mylar® and a heavy copper-braided shield. Acting as an antenna/drain, the shield is

connected only on the source-end providing a path to ground for induced noise that is away from the next component’s

input stage. Clarus Balanced Audio cables are made with the purest copper, PCCC, extruded into three distinctly different

optimized conductor types for Bass, Midrange and High-Frequencies. Each conductor type is insulated to minimize inter-

conductor interference resulting in an audio signal that is open and transparent with improved clarity, detail and tonal

balance. Clarus Balanced Audio cables are packaged and sold in pairs. Mono cables are available for half pair price.

Professional audio components transport signals over balanced connections using differential mode signaling. This

technology requires three conductors; one for main signal, one for the main signal inverted (180° out of phase with the

main signal) and one for ground. Electromagnetic Interference (EMI) will induce a noise level of equal intensity on each of

the two signal conductors. By subtracting the inverted signal from the main signal, the input electronics of the

component receiving the balanced signal will cancel the induced noise leaving silence. Balanced audio will deliver the

highest quality and quietest analog audio signals.

MODEL

Geometry


1,420.00 710.00

SRP SRP

1,000.00 500.00

1,140.00 570.00

per addtl meter



Unbalanced Single-ended RCA analog audio systems will benefit from using Clarus’ Twin Axial cable design. This design

has dedicated conductors for the positive signal and negative return signal with a multi layer heavy shield that is

connected to the source end only. In this design the shield will capture any induced interference sending it to ground at

the source end thereby isolating noise away from the input stage of the load. This configuration ensures a clear signal

transfer with overall noise rejection as close to balanced audio as possible.

Crimson and Aqua Signal-ended RCA audio cables were designed exclusively for Clarus by Jay Victor using the purest

copper, PCCC, extruded into three distinctly different optimized conductor types for Bass, Midrange and High-

Frequencies. Each conductor type is insulated thus isolating the different frequency ranges; the audio signal gains clarity

and the sound becomes more open and transparent. Clarus Single Ended Audio cables are packaged and sold in pairs.

Mono cables are available folr half pair price.

4 meter

PCCC - 16 AWG




0.5 meter

LENGTH

MODEL

1 meter

1.5 meter

2 meter

3 meter

Multiple Spiral Ribbon for Highs Multiple Spiral Ribbon for Highs


PCCC - 20 AWG



CRIMSON AQUA

CCA CAA

1,700.00 850.00

1,980.00 990.00

280.00 140.00

1,280.00 640.00

Geometry

Geometry



Single Midrange Conductors



350.00

310.00

270.00

SRP


180.00

1,250.00

1,070.00

890.00

800.00

710.00

620.00

SRP

80.00

550.00

470.00

PCCC - 18AWG

390.00

CCS CAS

Almost all AV Receivers and Pre-Amps will feature an LFE (Low Frequency Effects) output. The LFE channel is a mono

signal that is already filtered before the signal is sent to the Subwoofer. Subwoofers equipped with an LFE mode will have

the left input marked LFE.

PCCC - 16AWG

Multiple Midrange Conductors


Clarus Subwoofer cables are optimally designed for low frequencies. High frequencies, in general are rolled off as much as

possible, as these would simply represent noise in this type of cable. The cable geometry chosen for the Clarus subwoofer

cables is a multi-gauge twisted-pair design. Multi-gauge conductors create a more dimensional bass sound while twisted-

pair geometry gives the greatest noise reduction at low frequencies and tends to sound more natural. Try a Clarus

subwoofer cable and you will experience a rich blooming multi-dimensional bass. Clarus Subwoofer cables are packaged

and sold in each.

CRIMSON AQUA


per addtl meter

4 meter

0.5 meter

1.5 meter

MODEL

1 meter

LENGTH

2 meter

3 meterGeometry

Geometry


2 meter

per addtl meter

6.1% Silver Plated PCCC - 18AWG

Digital 110 Ohm AES EBU

Triple Balanced

240.00

1,510.00

1,270.00

1,030.00

910.00

790.00

670.00

SRP

3 meter

4 meter

1.5 meter

1 meter

CRIMSON

MODEL CCAE

LENGTH

0.5 meter

The AES EBU standard was jointly developed by the Audio Engineering Society and the European Broadcast Society. It is

the preferred serial digital interface format for professional audio. The Clarus AES EBU cable is a 110-ohm AES type 1

balanced design consisting of 3 dedicated solid gauge PCCC conductors with 6.1% ultra-pure silver-plating. Each

conductor is individually insulated and surrounded by a protective shielding to support the high frequency demands of

AES EBU. Clarus Crimson AES EBU cables are packaged and sold in each.

Triple Shielded

Geometry

Geometry


2 meter

CCUSB

490.00

340.00

SRP

The Crimson USB cable was exclusively designed for Clarus by Jay Victor for high speed USB 2.0 computer audio

applications. To lower resistance, dramatically increase signal transfer and reduce potential timing errors, Crimson USB

cables are engineered with solid-core 6.1% ultra-pure silver-plated PCCC signal conductors. The solid-core conductors

prohibit jitter while the silver-plating significantly improves signal transfer by minimizing losses due to skin effect. At GHz

frequencies, digital USB signals travel primarily on the surface (skin) of the conductors. At higher frequencies, silver is a

better conductor than copper, the USB audio signal is transferred with less loss. The power conductor pair is made using

heavy gauge copper to ensure that adequate current is provided to USB audio devices. Precision twisted cable geometry

and six separate shields protect against any external noise or any noise on the AC power lines from getting into the signal

path. Clarus Crimson USB cables are packaged and sold as each.

Six Separate Shields

Data Pair isolated from Power Pair

Precision Twisted

PCCC - 8AWG

MODEL

CRIMSONLENGTH

1 meter

Geometry


60.00

615.00 320.00

1 meter

1.5 meter

Single layer Aluminum wrap Shield

725.00 380.00

835.00 440.00

MODEL

SRP

450.00 230.00

505.00 260.00

Digital coaxial audio cables are designed for wide bandwidth applications to transport multichannel audio. For maximum

performance, Clarus Digital Audio cables are engineered with a proprietary dielectric designed to maintain a consistent

75 Ohm impedance for accurate signal transfer of the digital data. Ultra-pure silver-plated PCCC signal conductors

support higher frequency performance by lowering resistance to dramatically increase signal transfer. Shielding is chosen

for its immunity to noise and electromagnetic interference. Clarus Digital Audio cables are packaged and sold in each.

110.00


2 meter

3 meter

0.5 meter

CCD CAD

LENGTH SRP

560.00 290.00


CRIMSON AQUA

4 meter

per addtl meter

Double layer Aluminum wrap Shield

Double Layer Braided Shield Single Layer Braided Shield

Geometry


Clarus speaker cables are designed in a flat configuration. In typical round speaker cables the plus and minus are twisted

together causing phase distortion to the audio signal. In flat speaker cable design the plus and minus conductors are in a

parallel configuration. This design eliminates phase distortion and improves sound quality and imaging. Clarus speaker

cables are made with PCCC, the purest copper, extruded into three distinctly different optimized conductor types for

Bass, Midrange and High-Frequencies. Each conductor type is insulated to minimize inter-conductor interference

resulting in an audio signal that is open and transparent with improved clarity, detail and tonal balance. The overall large

gauge conductors lower the cable’s resistance and provide higher current capability resulting in an increase in dynamics

and improved low frequency performance. Lowering the inductance and the resistance makes it easier for the amp to

drive the signal down the cable. Sonically, the sound is smooth and fluent as well as more dynamic. Clarus Speaker cables

can be terminated with BFAs, spade lugs or a combination. Clarus Speaker cables are packaged and sold in each.

MODEL CCSP CASP

SRP SRP

150.00

2,900.00

2,600.00

2,300.00

2,000.00

60.00

1,270.00

1,150.00

1,030.00

10 Feet

8 Feet

per addtl foot


910.00

LENGTH

6 Feet

PCCC - 12AWG

Single Solid Bass Conductors

Multiple Sized Conductors for Support of Midrange &

Highs

12 Feet

PCCC - 10AWG



Multiple Spiral Ribbon for Highs


CRIMSON AQUA

Geometry

Geometry




Highs

per addtl foot

MODEL CCBW CABW

LENGTH

1,100.00

In Bi-wiring, two pairs of speaker cables are run from each channel of an amplifier to a speaker. The cable design is 2-

conductors to 4-conductors. At the 4-conductor speaker end, one pair will connect to the high-frequency driver and the

other to the low frequency driver of the speaker.

2,860.00 1,240.00


3,580.00

3,220.00 1,380.00

Single Solid Bass Conductors



12 Feet

The Clarus bi-wire speaker cables are designed in a flat configuration. In typical round speaker cables the plus and minus

are twisted together. Twisting causes phase distortion to the audio signal. In flat bi-wire cable designs the plus and minus

conductors are in a parallel configuration. This design eliminates phase distortion and improves sound quality and

imaging. Clarus speaker cables are made with PCCC, the purest copper, extruded into three distinctly different optimized

conductor types for Bass, Midrange and High-Frequencies. Each conductor type is insulated to minimize inter-conductor

interference resulting in an audio signal that is open and transparent with improved clarity, detail and tonal balance. The

overall large gauge conductors lower the cable’s resistance and provide higher current capability resulting in an increase

in low frequency performance. Lowering the inductance and the resistance makes it easier for the amp to drive the signal

down the cable. Sonically, the sound is smooth and fluent as well as more dynamic. ClarusBi-Wire cables can be

terminated with BFAs, spade lugs or a combination. Clarus Bi-Wire cables are packaged and sold in each.

6 Feet

8 Feet

10 Feet

SRP SRP

2,500.00

1,520.00

180.00 70.00

CRIMSON AQUA


PCCC - 12AWG PCCC - 14AWG

Geometry

Geometry



8 Inches

For Bi-Wireable speakers we strongly recommend replacing the metal bars between binding posts with Clarus Speaker

jumpers. Clarus offers Speaker Jumper cables in 8 inch lengths and sold in sets of two. Clarus Speaker Jumper cables can

be terminated with BFAs, spade lugs or a combination.



Highs

LENGTH SRP SRP

230.00375.00

PCCC - 12AWG




PCCC - 14AWG

Single Solid Bass Conductor

MODEL CCSJ CASJ

CRIMSON AQUA

Geometry

Geometry


6 Feet

770.00

430.00

260.00

1,560.00

860.00

510.00

For line-level components, such as CD players, DACS, Transports, & preamps, much less current is needed, and additional

flexibility is very desirable to aid in installation. For this application, Clarus uses a smaller overall gauge cable but

additional shielding is added. These types of components are much more sensitive, and can pick up RF and/or EMI noise

easily. The result is an obvious audible improvement created by lowering the noise floor, and allowing you to hear more

of the recorded information. Clarus Power cables are packaged and sold in each.

3 Feet

PCCC - 14AWGPCCC - 12AWG

CAP

Multiple Sized Conductors to support dynamics &

transients

Single Solid Flat Conductor

Alternating Twists

Triple Shielded


transients

12 Feet

Single Solid Heavy ConductorMultiple Solid Heavy Conductors

SRP SRP

Alternating Twists

Triple Shielded

MODEL CCP

LENGTH

Clarus Power Cables are designed specifically for maximum noise reduction, to support a 50/60Hz low 60z60low

frequency AC signal and to supply the current demands of audio components without any loss of dynamics. Noise

rejection is critical and Clarus Power Cables rely on proprietary winding techniques and triple shielding to limit noise in

the building’s grid as well as EMI egress and ingress thus ensuring the lowest noise floor for sensitive source components.

Since line and neutral alternate back and forth 60 times per second, vibration isolation is critical, Clarus Power Cables are

engineered with a specialized dielectric formula developed specifically to dampen AC vibrational noise.

Current capabilities for power cables are a major concern. Wire gauges must be sufficient so as not to starve this current.

When only large conductors are used a cable tends to lose dynamics. To respond quickly to transients and prevent any

loss of signal, Clarus Power Cables combines different sizes of large conductors.

CRIMSON AQUA

Geometry

Geometry


3,120.00 1,560.00

Triple Shielded Triple Shielded

1,720.00 860.00


transients


transients

6 Feet

3 Feet

MODEL CCP-HC CAP-HC

LENGTH

PCCC - 8AWG

Multiple Solid Heavy Conductors

Clarus High Current Power Cables are designed specifically for maximum noise reduction, to support a 50/60Hz low

60z60low frequency AC signal and to supply the current demands of large power amplifiers without any loss of dynamics

Noise rejection is critical and Clarus Power Cables rely on proprietary winding techniques and triple shielding to limit

noise in the building’s grid as well as EMI egress and ingress thus ensuring the lowest noise floor for sensitive source

components. Since line and neutral alternate back and forth 60 times per second, vibration isolation is critical, Clarus

Power Cables are engineered with a specialized dielectric formula developed specifically to dampen AC vibrational noise.

Current capabilities for high current power cables are a major concern. Large power amps draw current in pulses.

Resistance in a power cable may restrict the peak level of a required pulse which will limit the transient response of an

audio amplifier. Clarus High Current Power Cables are designed with large size wire gauges specifically so as not to starve

this current demand. However, large gauge conductors will not respond as quickly to transients. For this reason Clarus’

design includes a combination of smaller conductors and large conductors. The Clarus High Current Power Cables provide

full power, on-demand without limiting audio dynamics. For maximum noise reduction Clarus designed alternating lays

and twisting of the cable’s conductors to reduce the distortion caused by magnetic fields that are created when insulated

conductors are twisted in a bundle. Alternating the twist cancels out magnetic fields eliminating distortion. Clarus Power

cables are packaged and sold in each.

1,020.00 510.00

CRIMSON AQUA

SRP SRP

12 Feet

Alternating Twists

PCCC - 10AWG

Single Solid Heavy Conductor

Alternating Twists

Geometry

Geometry


SRP SRP

Current capabilities for high current power cables are a major concern. Large power amps draw current in pulses.

Resistance in a power cable may restrict the peak level of a required pulse which will limit the transient response of an

audio amplifier. Clarus High Current 20A Power Cables are designed with large size wire gauges specifically so as not to

starve this current demand. However, large gauge conductors will not respond as quickly to transients. For this reason

Clarus’ design includes a combination of smaller conductors and large conductors. The Clarus High Current 20A Power

Cables provide full power, on-demand without limiting audio dynamics. For maximum noise reduction Clarus designed

alternating lays and twisting of the cable’s conductors to reduce the distortion caused by magnetic fields that are created

when insulated conductors are twisted in a bundle. Alternating the twist cancels out magnetic fields eliminating

distortion. Clarus Power cables are packaged and sold in each.

12 Feet

CAP-HC2

6 Feet

MODEL

CRIMSON AQUA

1,870.00 1,000.00

3 Feet

Alternating Twists Alternating Twists

LENGTH

3,270.00 1,700.00

Multiple Solid Heavy Conductors

Triple Shielded Triple Shielded

PCCC - 8AWG


transients


transients

PCCC - 10AWG

Single Solid Heavy Conductor

CCP-HC2

Clarus 20 Amp High Current Power Cables are designed specifically to supply a 20A, 50/60Hz AC signal for the current

demands of large power amplifiers without any loss of dynamics and provide maximum noise reduction. Noise rejection

is critical and Clarus High Current 20A Power Cables rely on proprietary winding techniques and dual shielding to limit

EMI egress and ingress thus ensuring the lowest noise floor. Since line and neutral alternate back and forth 60X per

second, vibration isolation is critical. Clarus power cables uses a specialized dielectric formula developed specifically to

dampen AC vibrational noise.

1,170.00 650.00Geometry

Geometry


the CCP-HC Crimson High Current Power

cable which also will not limit current.

Clarus Concerto is designed to provide your system components with AC power that has been scrubbed clean of

unwanted extraneous noise that is either residing on your building’s internal power grid or noise that has been induced

by Electromagnetic Interference (EMI). Through the application of innovative engineering combined with many hours of

listening to music from both analog and digital components, Clarus developed Concerto, a state-of-the-art AC line

conditioner, noise eliminator and surge suppressor.

The Clarus Concerto has eight (8) Hospital-Grade duplex outlets each arranged at a 45° angle making it easier to connect

your component’s AC plug. The Hospital-Grade outlets are electrically isolated to prohibit inter-outlet interaction. Outlet

banks are labeled specifically for the appropriate component-type for which it was designed to provide the highest level

of filtering. Two outlets labeled: HIGH CURRENT are connected to a massive 30A C-Core filter designed to deliver full

power without restricting dynamics to power amplifiers, receivers and powered subwoofers. Four outlets labeled:

DIGITAL connect to filter systems specifically designed to deliver clean power to DAC and CD player. Clarus’ proprietary

design of complex multi-level filtering provides the best attenuation of noise while not restricting dynamics. Two outlets

labeled: ANALOG delivers clean AC power that will allow analog music to bloom. The technologically advanced C-Core has

superb magnetic properties that performs and sounds better than any filter available. The Concerto’s high performance

hospital grade outlets are engineered with advanced materials to ensure electrical contact reliability over time. In

addition, the Clarus Concerto provides Vibration Control, Under/Over Voltage protection, Surge Suppression and a cable

support bar to easily handle the heaviest power cable.

120 VAC / 15AMP

RoHS

Dimensions

Net Weight

UL® Certification

Yes

MODEL

UL 60065

960 Joules

L-N = 80Ka

395 VAC Max

L-N, N-G, G-L

SRP

Available Nov. 15, 2019

Max Surge Current

CP-8

Protection Mode

Joule Rating

OUTLETS

Rating

8

Clamping Voltage

The Concerto will not limit current.

We recommend using a power cable like

3.5”H x 19”W x 12.75”D

19 lbs

3,600.00Geometry


Max Surge Current

Rating

Protection Mode

Joule Rating

UL® Certification

Clamping Voltage

MODEL CPB-2

OUTLETS

2

The Clarus Duet Power Block is designed with the capability to support the demands of mono block amplifiers. The Duet’s

high performance Hospital Grade outlets are engineered with advanced materials to ensure electrical contact reliability

over time. The outlet bank of the Duet is labeled High Current and incorporates a massive 30A C-Core filter to deliver full

power without restricting dynamics to high current equipment like mono block amplifiers. The technologically advanced

C-Core has superb magnetic properties that performs and sounds better than any filter available. The Duet power block

also provides surge suppression and safety Ground and Polarity LEDs that when lit indicate the power cord and outlet to

which the power block is connected is in-phase and properly grounded.

Available Nov. 15, 2019

L-N = 80Ka

The Duet will not limit current.

We recommend using a power cable like

the CCP-HC Crimson High Current Power

cable which also will not limit current.

RoHS

Net Weight

120 VAC / 15AMP

L-N, N-G, G-L

395 VAC Max

Yes

3.5”H x 7”W x 9.75”D

5.4 lbs

UL 60065

480 Joules

Dimensions

SRP

1,250.00


MODEL BOX-CLUXL BOX-CLUXS

SIGN-7X5C

Limited signage is available for your demo systems to show that the system is wired by Clarus

120.00 100.00

SRP SRP

SRP

Clarus provides elegant luxury black lacquer boxes for special product presentations for your most discerning clients. Use

one to present a special offer to your customers in your store.

Copyright © 2019 Gordon J. Gow Technologies, Inc. All rights reserved.

Clarus Cable® is a registered trademark of Gordon J Gow Technologies, Inc. All other trademarks are the

property of the respective owners. As we continually strive to improve our products, Clarus Cable reserves the

right to change product specifications and prices without notice. The technical and other information contained

herein is not intended to set forth all technical and other specifications of Clarus Cable products. Additional

information can be obtained on-line at www.claruscable.com


all prices are in us dollars and are subject to …

Documents