NOTE: In conditions utilizing an antenna tuner to compensate for FEED POINT (not tuner) SWRs over 2:1, such as tuning wide ranges of 80 meters, attic installations, less than ideal installations causing high SWRs or using high power with high SWRs, the Model SEP static protector MUST be removed from the Model DELTA-C center insulator to prevent "false triggering" of the device. The antenna will operate normally without it.

NOTE: The article "Problem Solvers for Wire antennas" is not in this packet, but is now on our WEB site.

Note: Models DX-LB/LB Plus have not been tested with ladder line type installation.

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>

“Problem Solvers for Wire Antennas” now on WEB home page at <www.alphadeltacom.com>