altai certification training configuration
DESCRIPTION
Altai Certification Training Configuration. Professional Services Altai Technologies Limited. Module Outline. AP Default Settings A8 Basic Configurations A8 Advanced Configurations 5GHz Bridge Mode Configuration A8-A2 Bridge Mode Configuration A8-C1 CPE Mode Configuration - PowerPoint PPT PresentationTRANSCRIPT
Altai Super WiFi
1
Not for Distribution – Altai ConfidentialNot for Distribution – Altai Confidential
Altai Super WiFi
Altai Certification Training
ConfigurationProfessional Services
Altai Technologies Limited
Altai Super WiFi
2
Not for Distribution – Altai ConfidentialNot for Distribution – Altai Confidential
Altai Super WiFi
Module Outline
• AP Default Settings• A8 Basic Configurations• A8 Advanced Configurations• 5GHz Bridge Mode Configuration• A8-A2 Bridge Mode Configuration• A8-C1 CPE Mode Configuration• A8-Ein/A8n Configurations
Altai Super WiFi
3
Not for Distribution – Altai ConfidentialNot for Distribution – Altai Confidential
Altai Super WiFiAP Default Settings
• A8/A8-Ei/A8-i default IP address
• 192.168.1.222• 255.255.255.0• FW 2.2.3.101• Username: altai• Password: wag
• A2/A2e default IP address• 192.168.1.20• 255.255.255.0• FW 1.0.0.26• Username: altai• Password: wag
• A8-Ein/A8n default IP address• 192.168.1.222• 255.255.255.0• FW 1.2.0.621• Username: root• Password: superwifi123
• C1 management IP address• 192.168.99.99• 255.255.255.0• FW 1.0.0.19• Username: altai• Password: wag
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
4
A8 Basic Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
555
Configuration Case• A8 Basic configurations:
• Regulatory domain: RoW• Disable DHCP Client (Static IP Address)
• IP Address: 10.6.127.185• Subnet mask: 255.255.255.0• Default gateway: 10.6.127.1
• Wireless mode: 802.11b/g mode• Radio frequency: To be determined by Channel Scan result• Transmitting power: 25dBm• VAP 0 (Management and normal service VAP)
• SSID: WiFi_mgt• Suppressed SSID: Enabled• Maximum Clients: 10• Wireless security: WPA-PSK + AES
• VAP 1 (For service only VAP)• SSID: WiFi_Service• Maximum Clients: 256• Wireless security: WPA-PSK + AES
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
666
Tools>Channel Scan
Click to start channel scan
All the clients traffic would be interrupted during the channel scan test.
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
777
Click to show Noise Floor
Channel Scan Success
Tools>Channel Scan
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
888
Key Considerations:1. Num of SSID2. Neighbor SSID3. Usage4. Noise level
Tools>Channel Scan
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
999
FCC (US Standard) – 2.4GHz Max EIRP 36dBmETSI (European Standard)– 2.4GHz Max EIRP 20dBmRoW (Rest of the world)– 2.4GHz Max EIRP 60dBm
Select A8
Click Save to batch the changes
Configuration>System
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
101010
Recommend “Static IP”
Static IP, subnet mask and default gateway configuration(Default IP address: 192.168.1.222)
Click Save to batch the changes
Configuration>Network
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
1111
Configuration>2.4G Wireless AP>General
Select channel:ETSI/RoW Ch1-13FCC Ch1-11
Wireless mode (802.11b Max 11Mbps, 802.11b/g Max 54Mbps, 802.11g Max 54Mbps)
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
1212
Configuration>2.4G Wireless AP>Sectors
Maximum Tx Power 25dBmAntenna Gain - Cable Loss + Tx Power ≤ Max EIRP
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
1313
Configuration>2.4G Wireless AP>VAP Basic
Set SSIDA8 will not broadcast SSID
Default value: 256
Enabled allows traffic to pass between stations in a VAP. For mgt VAP, recommended enable. For normal service VAP, disable.
Click Save to batch the changesRemark:VAP 0 usually acts as management VAP so it only allows small number of wireless clients and hidden its SSID. VAP 1 acts as normal service VAP so it sets maximum clients.
• Normal Service: Allow to access Internet• Management: Allow to access the A8 web interface. Only VAP 0 has this configuration.
Enable VAP
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
14
Inter/Intra-VAP Traffic Control
The feature: Traffic among clients of the same SSID/VAP can be blocked Traffic among clients of different SSID/VAP can be blocked
The user benefit: Improved network
security Better network traffic
control
SSID 1
SSID 1 SSID 2
SSID 2
Inter-VAP traffic blocked
Intra-VAP traffic blocked
A8
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
1515
Configuration>2.4G Wireless AP>VAP Basic
Click Save to batch the changesRemark:VAP 0 usually acts as management VAP so it only allows small number of wireless clients and hidden its SSID. VAP 1 acts as normal service VAP so it sets maximum clients.
Default: AccessCan change to “Trunk”
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
1616
Configuration>2.4G Wireless AP>VAP Security
Authentication Open Shared Key WPA WPA-PSK WPA2 WPA2-PSK
Cipher Disable WEP WEP AES/TKIP AES
Key 4 Keys RADIUS PassPhrase RADIUS PassPhrase
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
17
Highly Secure
The user benefit: Latest encryption and
authentication support Radio channel scanning and
auto alarm for rogue AP
The Altai technology: SSID suppression, inter/intra-VAP traffic blocking Rogue AP detection WPA, WPA2-PSK, 802.1x (PEAP, TLS, TTLS) authentication, MAC address
filtering WEP, TKIP and AES encryption Backup RADIUS server support
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
1818
Reboot AP
Click Reboot AP to apply all changes
Click OK
Wait for 30s to reload the web page
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
19
A8 Advanced Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
202020
Configuration Case
• A8 configurations:• Similar to basic configuration, except• Network Operation Mode: Gateway• Local IP Address: 192.168.125.1/24• NAT Mode: Enabled• 2.4GHz DHCP Snooping Trusted Port: Disabled• Bandwidth Control:
Airtime: DL 30%, UL 30%• Multicast Data Rate Control• QoS and DiffServ Tag: Enabled• Congestion Avoidance: FW-RED• Access Link Safe Mode: Enabled
• Ping Host: 10.6.127.1• Ping interval: 30s
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
212121
Configuration Case• VAP 0 (Management and normal service
VAP)• QoS Profile: Very High
• VAP 1 (For normal WiFi service only)• QoS Profile: ToS/802.1Q
• VAP 2 (For surveillance camera, authenticated by RADIUS)• SSID: WiFi_camera• Maximum Clients: 15• QoS Profile: High• Wireless security: WPA + AES
• Primary RADIUS Server: 10.6.127.120• RADIUS Port: 1812• RADIUS secret: test
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
2222
Configuration > Network>General
Enable Gateway ModeConfigure LAN port IP, subnet mask
Recommended: FWRED
Configuration > Network>NAT
Enable NAT Mode
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
23
Congestion Avoidance
The feature: A8 can avoid congestion by dropping selected frames in the Tx queue
when it is full based on one of the following mechanisms: 1) Tail Drop2) Random Early Drop (RED)3) Fair Weighted Random Early Drop (FWRED) (Altai patent pending)
The user benefit: Avoid congestion due
to a few problem clients
Higher average throughput for the majority
A8Tx queue is FULL
Tail drop – all last incoming packets will be dropped
RED – most frequently occurred client packets will be dropped
FWRED – highest airtime usage client packets will be dropped
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
2424
Configuration > 2.4G Wireless AP>General
Click Save to batch the changes
• 2.4GHz (unselected by default)
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
2525
Configuration > 2.4G Wireless AP>General
Click Save to batch the changes
• Ethernet (Trusted by default)• 5GHz (Optional)• 2.4GHz (Optional)
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
2626
Client4
Client3 (DHCP Server)
Client2 (DHCP Server)
DHCP Snooping Trusted Port
A8-1 A8-2
Client1
5G
2.4G 2.4G2.4G
2.4G
DHCP Server
Suppose A8 is in switch mode, all clients should get IP address from ethernet DHCP server, to avoid getting from client’s DHCP server, need to disable two A8s’ 2.4GHz trusted port and A8-1’s 5GHz trusted port.
Ethernet
xx xxx
x means untrusted interfaceBy default, Ethernet is trusted port
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
27
Bandwidth Control on Airtime/Throughput
The operation: 2 modes of control - Throughput (in kbps) or Airtime (in % of
occupancy) Bandwidth limit can be set per VPA/client/uplink/downlink for both
modes Airtime control can prevent the low data rate (11b) clients from
occupying too much airtime (throughput mode cannot solve this problem)
Airtime controlled to 5% per station
Throughput controlled to 250 Kbps per station
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
2828
Configuration > 2.4G Wireless AP>Bandwidth Control
Enabled Throughput
VAP: Total bandwidth for one SSIDStation: Total bandwidth for each wireless client
Set value to specify the maximum bandwidth
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
2929
Configuration > 2.4G Wireless AP>Bandwidth Control
Enabled Airtime
Set airtime value, default setting is 5%. Used to limit the use time of low data rate user.
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
30
Bandwidth Control Example
Using the airtime bandwidth control feature with VAP set to 15% and Station set to 5%, the congestion problem was totally resolved. CPE client ping time improved from 3000 ms to 50 ms
There are many low speed free WiFi users dragging down the performance of premium WiFi users
BEFORE
AFTER
3000 ms response time
50 ms response time
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
3131
Configuration > 2.4G Wireless AP>General
Enabled Multicast TrafficChoose Multicast Data Rate.Enabled IGMP Snooping
Recommended low multicast data rate and IGMP snooping enabled
Click Save to batch the changes
Protection Mode (Auto)When 11b only client exists, protection mode is automatically enabled to use protection rate for either CTS or RTS-CTS packet.
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
32
Multicast Traffic Filter
The feature: A8 can be set to drop all multicast traffic A8 can be set to limit multicast traffic to certain data rate
The user benefit: Limit unnecessary
multicast traffic Improve bandwidth
utilization
SourceMulticast packets at high data rate
Multicast packets can be limited to lower data rate
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
33
IGMP Snooping
The feature: Multicast traffic from a client in one SSID will only broadcast to the
clients within that multicast group of the same SSID
The user benefit: Reduce multicast
storm and unnecessary traffic
Improve bandwidth utilization
SSID 1 SSID 3
SSID 2
Source
Multicast packets
SSID 1 SSID 3
SSID 2
Source
With IGMP snooping, multicast packets will only be transmitted to the registered clients under the same SSID
Without IGMP snooping, multicast packets will be transmitted to all clients across all SSIDs
A8
IGMP: Internet Group Management Protocol
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
3434
Configuration > Network>Backhaul Link Integrity
Enable access link safe modeA8 pings to 10.6.127.1 for every other 30s.If ping request timeout for 3 times, it reboots and enters safe mode with SSID: “SafeMode<MAC address>”.
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
35
Highly Resilient
The user benefit: Complete backhaul
protection Mission critical proof Improve network stability Saves downtime cost
The Altai technology: Link Integrity – check link status from client up to the application
servers Backhaul Link Self Healing – automatic backhaul failover and recovery Access redundancy – clients are at least covered by 2 or more A8 Access Link Safe Mode –
automatic reboot with new SSID forcing client to release
Multiple coverage by A8 A8
A2
Resilient Backhaul Architecture
Backhaul link self healing
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
3636
Configuration > Network>QoS
Enabling QoS adds traffic priority tag in the packets.DiffServ Tagging is effective after enabling QoS. ToS field of IP packets will be changed based on QoS policy configuration.
QoS Profile:Very High, High, Normal, Low, ToS/802.1Q, IPToS/802.1Q changes the tag basing on the packet typeIP changes the tag basing on the port range and protocol
Click Save to batch the changes
Enabled QoS and DiffServ
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
3737
Configuration > 2.4G Wireless AP>VAP Basic
Enable VAP2
Set SSID
Set 15 clients
High QoS
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
3838
Configuration > 2.4G Wireless AP>VAP Security
Select WPAClick UpdateSelect AES
Enter RADIUS Server information
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
39
5GHz Bridge Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
4040
Bridge Combinations
• A8-A2 802.11a Mode Maximum Data Rate: 54 Mbps• A2-A2 802.11na HT40 ext ch +1/-1 Maximum Data Rate: 300 Mbps• A8-A8 802.11a Turbo + Bursting Mode + Fast Mode Maximum Data Rate: 108 Mbps
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
41
A8-A2 5GHz Bridge Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
424242
Sample Solution Layout
A8-A2 Bridge
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
434343
5GHz Bridge
A8 for large outdoor coverage
A2: 450 m LOS
Up to 1km LOS
A2 for coverage & capacity enhancement
Access
• Bridge: a backhaul link at 5GHz signal (802.11a)• Example Configurations:
• A2 setups 5GHz bridge with A8 5GHz MAC address• Enable 802.11a• Channel 56• Enable AES (Recommended bridge security)
• A8 setups 5GHz bridge with A2 5GHz MAC address• Enable 802.11a• Channel 56• Enable AES
• All configurations on both sides must be the same, except MAC address
2km
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
44
Rogue AP Detection
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
45
Rogue AP Detection
The feature: Neighboring APs’ information is obtained by the channel scan function The scanned neighboring AP list will be validated against the defined
legitimate AP list (BSSID with MAC address info, SSID) Rogue AP is declared if the validation with the legitimate AP list fails
The user benefit: Reduce security
threats to the network
Auto alert & reporting with the use of AWMS
Useful tool for deployment
Rogue AP
Check against legitimate AP list in A8Legitimat
e AP list
A8 is scheduled to perform channel scan
Reporting through AWMS or remote access
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
464646
A8: Status > Overview
A8 5GHz MAC address
Remark: The backside of AP unit also has 5GHz MAC address
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
4747
A2: Configuration > 5G Radio
1. Select 802.11a mode
2. Click Update
3. Select Frequency
4. Type in Bridge Distance
5. A8 5GHz radio MAC address
6. Select AES
7. Type in Key
8. Click Update
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
48
A8: Configuration>5G Wireless Bridge
1. Select 802.11a mode
2. Click Save
3. Select Frequency
4. Type in Bridge Distance
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
49
A8: Configuration>5G Wireless Bridge>Remote Bridge
5. Type in A2 5GHz radio MAC address and click Add to List
A8: Configuration>5G Wireless Bridge>Security
6. Select AES
7. Type in Key
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
5050
A8: Status > 5G Wireless Bridge
StateUp: associatedInactive: disconnected
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
5151
A8: Status > 5G Wireless Bridge
Maximum Data Rate11a mode: 54Mbps
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
52
A2-A2 5GHz Bridge Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
535353
5GHz Bridge
A2 for small area coverage & capacity enhancement
A2: 450 m LOS
A2: 450m LOS
Access
• Bridge: a backhaul link at 5GHz signal (802.11a)• Example Configurations:
• A2 setups 5GHz bridge with A2 5GHz MAC address• Enable 802.11na HT40ext ch+1• Channel 36• Enable AES (Recommended bridge security)
• A2 setups 5GHz bridge with A2 5GHz MAC address• Enable 802.11na HT40ext ch+1• Channel 36• Enable AES
• All configurations on both sides must be the same, except MAC address
2km
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
5454
Wireless modes: • 802.11a - Max 54Mbps • 802.11na HT20 - Max 130Mbps• 802.11na HT40ext ch+1 - Max 300Mbps• 802.11na HT40ext ch-1 - Max 300Mbps
A2: Configuration > 5G Radio
2. Click Update
3. Select Frequency
4. Type in Bridge Distance
5. A2 5GHz radio MAC address
6. Select AES
7. Type in Key
8. Click Update
1. Select 11na HT40ext ch + 1
Different channel sets
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
55
A8-A8 5GHz Bridge Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
5656
Up to 1km LOS
A8 for large outdoor coverage
Access
56
5GHz Bridge
• Bridge: a backhaul link at 5GHz signal (802.11a Turbo Mode)• Example Configurations:
• A8 setups 5GHz bridge with A8 5GHz MAC address• Enable 802.11a Turbo Mode +Bursting Mode + Fast Mode• Channel 56• Enable AES (Recommended bridge security)
• A8 setups 5GHz bridge with A2 5GHz MAC address• Enable 802.11a Turbo Mode +Bursting Mode + Fast Mode• Channel 56• Enable AES
• All configurations on both sides must be the same, except MAC address
2km
Up to 1km LOS
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
5757
A8: Configuration>5G Wireless Bridge>General
1. Select Turbo mode
2. Click Save
3. Select Frequency
4. Type in Bridge Distance
5. Enable Bursting and Fast Frame
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
5858
A8: Configuration>5G Wireless Bridge>Remote Bridge
5. Type in A8 5GHz radio MAC address and click Add to List
A8: Configuration>5G Wireless Bridge>Security
6. Select AES
7. Type in Key
Click Save to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
59
C1 CPE Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
6060
• A8 Configurations:• VAP1
• SSID: A8_CPE• Maximum Clients: 256• Wireless security: Open
• C1 Configurations:• CPE Mode: also named station mode• VAP 0
• Connect to A8_CPE• Wireless security: Open
Configuration Case
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
6161
A8 Configurations
Set SSID
Set VAP Security
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
6262
C1 ConfigurationsConfiguration>2.4GHz Radio
Enable Station Mode
Click Edit to modify VAP config
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
6363
C1 ConfigurationsConfiguration>2.4GHz Radio>VAP 0
Enable VAP0
Click Scan to scan available SSID
Click Edit to set security config, the same with A8
Only connect to a particular AP with the specific MAC. Usefull when SSIDs are the same.
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
6464
Choose one SSID
C1 Configurations
RSSI level Channel
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
6565
A8:Status>2.4G Wireless AP>Association List
C1 is connected to A8
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
66
A8-Ein/A8n Configurations
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
67
A8-Ein:Configuration>Network>General
Recommend “Static IP”
Static IP, subnet mask and default gateway configuration(Default IP address: 192.168.1.222)
Click Submit to batch the changes
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
68
A8-Ein:Tools>Channel Scan
Click to start channel scan
All the clients traffic would be interrupted during the channel scan test.
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
69
A8-Ein:Tools>Channel Scan
Noise Floor
Channel Scan Success
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
70
Configuration>Wireless>Radio0>General
• Wireless mode (802.11b, 802.11b/g, 802.11g, 802.11n, 802.11ng)• Channel Selection
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
71
Configuration>Wireless>Radio0>Superwifi
Sector State
Range OptimizationAuto, 0~800m, 200~1000m, 400~1200m
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
72
Configuration>Wireless>Radio0>WLAN
Edit SSID
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
73
Configuration>Wireless>Radio0>WLAN>WLAN General
Will not broadcast SSID
Set SSID
Enabled allows traffic to pass between stations in a VAP. For mgt VAP, recommended enable. For normal service VAP, disable.
Default value: 512
Access Traffic Right: Full Access or Management Only/Disable
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
74
Configuration>Wireless>Radio0>WLAN>WLAN Security
Authentication Open Shared Key WPA WPA-PSK WPA2 WPA2-PSK WAPI WAPI-PSK
Cipher Disable WEP WEP AES/TKIP AES SMS4
Key 4 Keys RADIUS Passphrase RADIUS Passphrase AS Passphrase
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
75
Configuration>Wireless>Radio0>WLAN>QoS
Enable DSCP to WMM Mapping
Different Value is different priority level
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
76
Configuration>Wireless>Radio0>WLAN>Bandwidth Control
Bandwidth Control for Total WLAN
Bandwidth Control for Each Station
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
77
Save and Apply
Click Submit to apply all changes
Click Save & Apply or Unsaved
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
78
A8-Ein/A8n & A8-Ein/A8n 5GHz Bridge Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
79
Configuration>Wireless>Radio1>General
Enable Radio
Radio Mode as AP
Wireless Mode and Channel
Disable Inter-WLAN Forwarding
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
80
Configuration>Wireless>Radio1>WLAN
Edit WLAN
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
81
WLAN General Configuration
Enable WLAN
Enable VLAN Pass Through
SSID Name for the Bridge
Hide SSID
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
82
WLAN Security Configuration
Authentication Mode as WPA2-PSK
Passphrase
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
83
Configuration>Wireless>Radio1>General (Remote)
Enable Radio
Radio Mode as Station
Transmit Power
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
84
Configuration>Wireless>Radio1>WLAN (Remote)
Edit
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
85
Configuration>Wireless>Radio1>WLAN>WLAN General (Remote)
SSID and Target BSSID
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
86
Configuration>Wireless>Radio1>WLAN>WLAN Security (Remote)
Authentication Mode and Pass Phrase
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
87
Connection status
Connection StatusSSID Name
Status>Interface>Radio1>Association List
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
88
A8-Ein/A8n & A2 5GHz Bridge Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
89
When the A8-Ein and A2n make the Bridge, the A2n 5Ghz wireless should be as AP mode, and the A8-Ein 5Ghz wireless should be as Station mode, then it will pass through the VLAN.
Notice
A2n A8-Ein
AP Mode
Station Mode
5Ghz Wireless Bridge
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
90
Configuration>5G Radio
Radio Operational as AP mode
Wireless Mode
Channel Selection
Edit VAP
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
91
VAP Configuration
State as Up
SSID of VAP
Hide SSID
Disable Intra-VAP Forwarding
Enable VLAN Trunk Port
Edit Security Configuration
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
92
Security Configuration
Authentication Mode as WPA2-PSK
Passphrase
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
93
Configuration>Wireless>Radio>WLAN (Remote)
Edit WLAN
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
94
5GHz Radio Configuration (Remote)
Enable WLAN
The SSID is 5GHz radio SSID from the master APThe BSSID is MAC address of the 5GHz radio from the master AP
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
95
WLAN Security Configuration(Remote)
Authentication mode as WAP2-PSK,Passphrase should match with the master AP
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
96
Connection status
RSSI Information
Altai Super WiFi
Not for Distribution – Altai Confidential
Altai Super WiFi
97
Thank You