altai u1 super wifi usb client quick setup guide · pdf file · 2013-11-13altai u1...

Altai Technologies Ltd. All rights reserved

ALTAI U1

SUPER WIFI USB CLIENT

QUICK SETUP GUIDE Version 1.0

Date: September, 2013


U1 Quick Setup Guide for 1.0.0.9

TPS13-001_rev1.0

Package Contents

1. Altai U1 Super WiFi USB Client

2. USB Cable (60cm)

3. Installation CD

Minimum System Requirements

1. Desktop or laptop PC with 1GHz or faster processor and 512 MB or more RAM.

2. Available USB 2.0 port.

3. Windows: XP SP3 32-bit/64-bit, Win 7 32-bit / 64-bit.

LED Indication

Cable Connection

4. Connect micro-USB connector of the USB cable to U1.

5. Connect the other end of the USB cable to the USB port of your computer.

Because U1 gets its power from computer, no external power supply is needed.

The power LED should light up when U1 is plugged in and the PC is on.

1 2 4



TPS13-001_rev1.0

Download and Support Latest software and document are available at the following link

http://www.altaitechnologies.com/support_download.php

Technical Support: [email protected]

Find out the OS of Your Computer

The installation and configuration procedures are different depending on the OS of

your computer. To find out the OS of your computer, right-click “My Computer”,

choose “Properties”.

mailto:[email protected]



TPS13-001_rev1.0

Please note Windows has 32 bit version and 64 bit version. You can check the version

information below:



TPS13-001_rev1.0

Windows XP

1. Download the U1 installer for Win XP from Altai website or copy it from U1

installation CD and put it to a specific directory. In this case, it is put on the

desktop.

2. Connect U1 to the computer and you will see the following popped up window,

please choose “No, not this time” and click “Next”.



TPS13-001_rev1.0

3. Now the system will try to locate the U1 driver folder at your selected directory.

Please make sure the directory is correct and click “OK”.

4. You will find the installation window below:

Note: If it pops up the following “Software Installation” warning window during

installation, please click “Continue Anyway”.



TPS13-001_rev1.0

5. Please wait until the installation is finished. The successful page will be shown as

following.

6. Now U1 driver is successfully installed and you can use it to connect to wireless

network the same as you are using your laptop integrated wireless card.



TPS13-001_rev1.0



TPS13-001_rev1.0

Windows 7 32 bit / 64 bit

Part A. New installation of U1 driver

1. Download the U1 installer or copy the installer from U1 installation CD according

to the system you are using and put it to a specific directory. In this document, it is

put on the desktop.

2. Connect U1 to computer and it will show “Installing device driver software” on

the bottom right corner. Please wait until it shows “Device driver software was not

successfully installed”. (We will install the driver manually in the following steps)

3. Please right click on the “Computer” icon on the desktop (If it is not there, please

go to Start>>Computer) and click “Properties”.

4. Please choose the “Device Manager” on the top left corner of the popped up

window.

5. Under the instance of “Other devices”, there is one device named “UB91C”. Right

click on it and choose “Update Driver Software”. In the popped up windown,

choose “Browse my computer for driver software”. The next step is to choose the

correct directory of the driver folder. (In this case, it is the desktop) and click OK.



TPS13-001_rev1.0

6. Please wait for a while before you see the following successful page.



TPS13-001_rev1.0

7. Now U1 driver is successfully installed and you can use it connect to wireless

network the same as you are using your laptop integrated wireless card.



TPS13-001_rev1.0

Part B. Upgrade from previous verson of U1 driver

1. If you have old version of U1 driver installed, you may see the following case when

you plug in U1. There are U1 and an unknown device listed in the Device

Manager. In this case, please uninstall both of them by right click on them and

choose “Uninstall”.

2. Please restart the computer after successful uninstallation of old drivers. The

following steps are the same in Part A.

altai u1 super wifi usb client quick setup guide · pdf file · 2013-11-13altai u1...

Documents