alternate blinking of the 195 - traffic tech · the requirements of the qatar traffic manual. - the...
TRANSCRIPT
222017
20
265
270
220195
1250
250
250 1500
grey
340Ø
6X 340mm dialamps LED amber
(light output 300-340mm)
Alternate blinking of the2 fold 340 dia lamps
and the light arrow with a Flash rate 60 to 90 flashes per minute
2500
2500
25X 220mm dialamps LED amber
(light output 200-220mm)
Alternate blinking of the 4 fold340 dia lamps with a Flash rate
60 to 90 flashes per minute
250 1500Ø
250
1250
25025
0
2500
2500
340Ø
4x Ø340mm dialamps LED amber
(light output 300-340mm)
- Amber lanterns must flash at the rate of between 60 to 90 flashes per minute such that one horizontal pair are always shown when the other horizontal pair are not shown.- The minimum intensity during the daylight should be 2400 candelas.- Each lantern may have up to 4 LEDs.- The intensity during the hours of darkness should not exceed 800 candelas.- Amber lenses should be to C yellow 1 in table of EN 12352:2006 or signal yellow (Class A) of BS1376.- The yellow backing board shall be reflectorised in their entirety to BS8408.- The Diagram 211 sign shall be retro-reflective DG3 material and comply with the requirements of the Qatar Traffic Manual.- The light arrow shall be of a type approved by Ashghal Roads O&M.
1250