10/2

2 P

ER

FOR

MA

NC

E P

AR

TS

ME

TA

L W

OR

K

PAGE 400 Office/Tech: 641-623-5401GUARANTEED. FOREVER.®

SINCE 1939

ME

TA

L FI

NIS

HIN

GSP

RA

Y-O

N F

INIS

HE

S

The subtle shades of blue, gray, and straw on color case parts give a gun a true custom look. Cowboy Action Shoot-ing has brought many guns out of retirement that need to have faded colors restored. We’ve as-sembled two, easy-to-use sys-tems with all the items you need to immediately begin a case col-

or hardening operation (except a quenching tub). Complete system includes our 1.37 cu. ft. heat treat furnace, 11" x 4" cylindrical crucible big enough for a rifle action, 30" long crucible tongs for handling ease and safety, Kevlar gloves for protection against high temps (also sold separately), a full face shield to protect your face, 10 pounds of high carbon content wood charcoal, 25 pounds of high carbon content filler-free bone charcoal, five disposable filter masks to keep dust out of your lungs, a long shop apron, and complete instructions explaining the color case hardening process. Kit Without Furnace has the same, large capacity crucible, charcoal, and supplies, only without the furnace, for those who already have a heat source ca-pable of heating the crucible to 1,450° F. ab

COLOR CASE HARDENING CRUCIBLE & TONGS - If you already have a furnace, these two tools will make the job easier. Crucible - 138 cu. in. of space lets you color case harden a rifle action or large revolver frame with space for the necessary blocking. Round shape is easy to handle with no wasted corner space. Clamping rings position the canister securely in the tongs when carrying and dumping. Tongs - 30" long handles keep you back, away from the furnace heat, makes grabbing the hot crucible safer and more secure.SPECS: Steel. Crucible - 11" (28cm) high, 4" (10cm) diameter. Tongs - 30" (76cm) long.#080-951-000AV Crucible, 8K80B18 � � � � � � � � � � � � � � � � $ 113.99#080-951-100AV Tongs, 8K67Q49 � � � � � � � � � � � � � � � � � � 99.99#080-951-200AV Crucible & Tongs, 8K135I35 � � � � � � � � 159.99

SMALL COLOR CASE HARDENING CRUCIBLE - Ideal choice for small parts. Fits small furnaces and only requires 27 cubic inches of bone per session to save you money on small jobs. Perfect for rings, slide stops, bolts, and much more.SPECS: Steel. 51/2" (14cm) high, 33/4" (9.5cm) diameter#080-951-001AV Small Crucible, 8K61Q80 � � � � � � � � � � � $ 99.99

COLOR CASE HARDENING KITProduce Beautiful Color Case

Hardening Like The Pros

#100-011-091AV Case Hardening Kit w/Furnace, 3Z2127N56 � � � � � � � � � � � � � � � � � � � � � � $ 2380.99

#080-951-501AV Case Hardening Kit w/o Furnace, 8K430B13 � � � � � � � � � � � � � � � � � � � � � � � 543.99

#494-666-160AV Hi-Temp Gloves, 4D73I65� � � � � � � � � 79.99*Note: Shipped Truck only. Please call for freight charges.

Wood and bone charcoal with just the right sieve size for crucible packing of steel parts to be hardened. Hi-carbon content without wax-es or fillers gives brilliant color patterns. Mix-ing types by specific ratio provides additional control over color and pattern. abSPECS: Packed in 5 gal. bucket. Bone - 10x28 sieve size, 25 lb. (11 kg) weight. Wood - #6 size. 10 lb. (4.5 kg) weight.

HEAT-TREATING CHARCOALProduces Dramatic Color & Swirl Patterns

#084-097-031AV Bone Charcoal, 5L110P85� � � � � � � � � � $ 119.99#084-098-013AV Wood Charcoal, 5L36M83 � � � � � � � � � 43.99

PL

AT

ING

& C

ASE

HA

RD

EN

ING

ALTERNATIVE FINISHESPARKERIZING, COLOR CASE HARDENING,

PLATING & BROWNINGPARKERIZING - Parkerizing is ideal on most steels (but not aluminum or stainless) as an alternative to bluing. It is ideal for hunting and law enforcement firearms due to good weather resistance, low light reflection and durability against wear. Due to slight surface etching, Parkerizing is not recommended for match-grade barrels. A Pre-Dip Blackener can be used to change the finish to black, or the parts can be blued, dyed or sprayed with Brownells Baking Lacquer or Aluma-Hyde™ after Parkerizing. Application is by immersion in a glass, ceramic, fiberglass or stainless steel tank of heated solution.

COLOR CASE HARDENING - This classic finish is found on the receivers of Colt Single Actions and many shotguns. The brilliant, swirling blues, grays and golds are the result of packing steel parts in a mixture of wood and bone charcoal, heating them to roughly 1400° F. then quenching in water. The surface of the steel is also hardened in the process. Because of the high temperatures, warping can be a problem and parts where a specific hardness is critical should not be color case hardened. Application requires a heat treating furnace, a steel crucible to hold the parts, plus high temperature handling gear and a 55 gallon drum of quenching water.

ELECTROLESS NICKEL PLATING - This is an attractive, very durable, extremely hard, metal surface plating often used to blend carbon steel parts with stainless steel, or to provide more weather and wear resistance to parts. It can be applied to matte surfaces for a dull finish or to polished metal for a bright surface. A nickel-plated surface is extremely hard, relatively frictionless, and is so tough that removal requires chemical stripping or sanding. Application requires tanks, heating units and tank agitators.

BROWNING - Traditionally reserved for muzzleloaders, slow, rust browning can be quite attractive. True, rust brown finishes are usually more durable than the quick, heat process browns, although they take much more time to do. Varying techniques can give anything from a smooth, slightly glossy finish to a “rough”, non-reflective one. Since it is a rust process, bores and critically fitted parts must be protected. Application varies but may include damp cabinets, hot air guns or propane torches.

REPLACEMENT NOZZLES - Nozzles can get clogged if you forget to clear them after each spraying session or, if you don’t shake well, the pickup tube inside the can gets plugged. We have three nozzles that solve these problems. Replace clogged nozzles with either of these two options: Replacement Nozzle B, Round Pat-tern provides a broad, round pattern; Fan Pattern Replacement Nozzle provides a narrow, verticle pattern, similar to professional spray guns. Clean Out Nozzle - Lets full pressure blow through a plugged pickup tube to clean it out. Once clear, install a Replace-ment Nozzle to continue spraying. abSPECS: Pak of 12. Clean Out Nozzle not intended for spraying. These are the correct nozzles for Aluma-Hyde II.#084-179-002AV Replacement Nozzle B, 1F2B82 � � � � � � �$ 3.99#084-179-005AV Fan-Style Replcmnt Nozzles, 6A3L80 � � 4.99#084-179-004AV Clean Out Nozzle, 1F2M82� � � � � � � � � � � � 3.99

The special feature of Aluma-Hyde II (and the rea-son for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethelyene. Today’s new family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak par-ticular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents.

Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gun shop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Gray Parkeriz-ing (medium dark), Stainless Steel Gray (light), Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. Gloss Clear help expand the overall applica-tions of this time- and money-saving product. We like the Matte Black color for refinishing those used AR-15 buttstocks and hand-guards you pick up when building a parts gun, knock around truck guns and of course, anodized parts.

Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90˚ F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma- Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90˚ F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications. abSPECS: 12 oz. (340 g) aerosol can.

ALUMA-HYDE® IIDurable Epoxy Base Paint Withstands Bore

Cleaners & Solvents

— Advise # — Aluma-Hyde II, 1F10B14 � � � � � � � � � � � � � � � �$ 13.99

LIQUID ALUMA-HYDE® II - Formulated specifically for airbrush and spray gun ap-plication, combines the same abrasion- and solvent resistant properties of aerosol Aluma Hyde II with the freedom to use the application system of your choice. Available in Parkerizing Gray (medium gray), Dark

#083-002-001AV Liquid Aluma-Hyde II Solvent & Thinner, 5L17B92 � � � � � � � � � � � � � � � � �$ 22.99

Clear, durable, soft-luster finish protects steel, alu-minum or brass surfaces from rust, corrosion, dulling, and wear. Excellent coverage, each additional coat bonds with the one before to improve protection. Im-pervious to most bore cleaning solvents. abSPECS: Aerosol. 12 oz. (340 g). Clear, semi-gloss or matte finish.

EXTRA NOZZLES - Solve many spraying problems by replacing clogged nozzles. Use Clean Out Nozzle to clear a clogged pickup tube, before installing a Replacement Nozzle. abSPECS: Pak of 12. Correct nozzles for Metal-Coat Epoxy. Clean Out Nozzle not intended for spraying.#084-179-002AV Replacement Nozzle B, 1F2B82 � � � � � � $ 3.99#084-179-004AV Clean Out Nozzle, 1F2M82� � � � � � � � � � � 3.99

METAL-COAT EPOXY™Clear, Tough, Protective Finish For Metal Surfaces

#083-075-012AV Metal-Coat Epoxy, Semi-gloss, 3H9Q32 � � � � � � � � � � � � � � � � � � � � � � � � � �$ 11.99

#083-075-112AV Metal-Coat Epoxy, Matte, 3H12J55 � � 15.99

Now you can instantly add extra grip to any rifle or pistol stock without machining or baking. Epoxy- base makes it long wearing and water- proof. Sticks to all properly prepared fiberglass, wood, aluminum, and metal surfaces and dries in only minutes. Round-shaped, synthetic grit particles have absolutely no sharp edges so they can’t cut or abrade your face or hands.

Especially fantastic for fiberglass stocks. abSPECS: 12 oz. (340 g) aerosol can. 1 can covers 24 sq. ft.

REPLACEMENT NOZZLES - Nozzles can get clogged if you forget to clear them after each spraying session or, if you don’t “shake well”, the pickup tube inside the can gets plugged up. We have two nozzles that solve these problems. Replacement Nozzles - Replace clogged Nozzles. Clean Out Nozzle - Lets full pressure blow through a plugged pickup tube to clean it out. Once clear, install a Replacement Nozzle to continue spraying. abSPECS: Pak of 12. Clean Out Nozzle not intended for spraying.These are the correct nozzles for Spray Grit.#084-179-003AV Replacement Nozzle C, 1F2L87� � � � � � � $ 3.99#084-179-004AV Clean Out Nozzle, 1F2M82� � � � � � � � � � � 3.99

SPRAY GRIT™Grit-Filled Epoxy Paint Sprays Extra Grip Or

A Slip-Resistant Surface Wherever You Need It

STOCK # COLOR#083-044-004AV Green#083-044-002AV Gray#083-044-001AV Clear

STOCK # COLOR#083-044-003AV Brown#083-044-005AV Black

— Advise # — Spray Grit, 3H9C50 � � � � � � � � � � � � � � � � � � � � $ 11.99

High pigment density, ideal for one-coat coverage of synthetic stocks and metal rifle components, plus all of your other tactical gear. Fast-drying enamel applies easily. abSPECS: 12 oz. (340 g) aerosol cans.

CAMO PAINTSMake Your Own Camouflage Patterns

STOCK # COLOR#040-009-790AV Forest Green#040-009-520AV Dk. Green#040-009-570AV Earth Yellow#040-009-670AV Earth Red#040-009-680AV Field Drab#040-009-770AV Sand#040-009-870AV Olive Drab

— Advise # — Camo Paints, 4K4H67 � � � � � � � � � � � � � � � � � � � $ 5.99

STOCK # COLOR#040-009-880AV Black#040-009-920AV Marine

Corp. Green#040-009-970AV O.D. Semi-

Gloss#040-009-990AV Earth Brown

STOCK # COLOR#083-002-012AV Matte Black

#083-002-212AV Park. Gray

#083-002-412AV SS Gray

#083-002-512AV Earth Brown

#083-002-210AV Coyote

#083-002-014AV Magpul Flat Dark Earth

STOCK # COLOR#083-002-112AV Semi-Gloss

Black#083-002-812AV Dark Parkerizing

#083-002-312AV O.D. Green

#083-002-712AV Matte Clear

#083-002-211AV Desert Tan

Parkerizing Gray (dark gray), and O.D. Green. Thin with Liquid Aluma-Hyde II Solvent & Thinner to the required consistency for your spray device. Use thinner to clean spray equipment and work surfaces; does not affect hardened strength and will not soften fully cured Aluma Hyde II.SPECS: Paint - 8 oz. (237ml) can. Thinner - 1 qt. (32 oz./946ml) can.

STOCK # COLOR#083-002-817AV Parkerizing Gray

#083-002-816AV Dark Parkerizing Gray

#083-002-815AV O.D. Green

— Advise # — Liquid Aluma-Hyde II, 3H8G15 � � � � � � � � � � � $ 9.99

PAGE 401Orders: 800-741-0015order on the web

brownells.com

SPR

AY

-ON

FINISH

ES

Spray-on DuraBakeTM enamel finish com-bines the ease of application of the Duracoit system with the extra durability of a baked-on finish. DuraBake can be applied to ferrous metals, stainless steel, aluminum, alloys, even plastic, and dries to the touch in as little as 15 minutes before oven curing. Part of the secret is the TruStrip aerosol cleaner/degreaser that thoroughly preps the metal’s surface, before

application of the DuraBake enamel itself. The TruStrip guarantees plenty of “tooth” to hold the enamel tight to the surface; baking speeds the curing of the enamel and seals the deal. Produces a uniform, deep black finish. Many more colors available at brownells.com. abSPECS: 6 oz. each of DuraBake and TruStrip. Produces a black finish.

LAUER CUSTOM WEAPONRY

SHAKE ’N BAKE FINISHING KITTough, Durable Oven-Cure Finish

For All Metals

#100-009-176AV Shake 'N Bake Kit, 9K32L63 � � � � � � � �$ 34.95

Unique can-within-a-can system includes color finish and hardener in one easy-to-use unit. Elimi-nates need for measuring, mixing or airbrush. Just re-lease the hardener, and spray onto a gun. Adjustable nozzle lets you spray in vertical or horizonal pattern. Works on all types of metal, plastic and wood. Can be applied over bare metal, or any metal finish like Parker-izing, anodizing and bluing. Once activated, can remains useable for up to 48 hours. Each can contains enough for 2 to 4 firearms, depending on size. Requires no baking or preheating. Pink Lady re-quires base coat of DuraCoat White before final application. abSPECS: Aerosol, 12 oz. can.

LAUER CUSTOM WEAPONRY

DURACOAT AEROSOLFinish & Hardener In One Can

#100-013-668AV Matte Black, 9K42G89 � � � � � � � � � � � �$ 45.95#100-013-669AV Woodland Green, 9K42E89 � � � � � � � � 45.95#100-013-670AV Parkerize Color, 9K42F89 � � � � � � � � � � 45.95#100-013-671AV OD Green, 9K42J89 � � � � � � � � � � � � � � � 45.95#100-013-673AV Combat Gray, 9K42Q89 � � � � � � � � � � � 45.95#100-013-675AV MAGPUL Flat Dark Earth, 9K42H89 � 45.95#100-013-676AV Blackhawk Coyote Tan, 9K42M89 � � 45.95#100-013-672AV White, 9K42I89 � � � � � � � � � � � � � � � � � � � 45.95

Easy-to-use kit contains all the components you will need to achieve a durable solvent-, scratch-, and chip-resistant finish on any firearm. Can be applied over bluing, phosphate finishes, and anodizing; also works on plastic and wood. Completely seals the surface to prevent rust and corrosion. Strip the part with the included Cleaner/Degreaser, scuff with enclosed pad, mix the DuraCoat liquid with the hardner, fill the Pre-Val spray unit, and spray the part. Finish dries overnight and attains a complete cure in 3-4 weeks. Contains enough DuraCoat liquid to fully coat a rifle or shotgun. ab

Easy Prep & Spray System For A Durable Matte Black Finish

#100-006-802AV DuraCoat Shake-N-Spray Kit, 9K37A29 � � � � � � � � � � � � � � � � � � � � � � � � � � �$ 39.95

DURACOAT SHAKE-N-SPRAY™ FINISHING KIT

The world-famous, ultra-thin, friction-reducing coating that lasts and lasts can now be applied to any clean, pre-heated metal part in as little as 2 hours without the extra expense of owning an air brush. Brownells has teamed up with KG Products to pro-duce the genuine GUN-KOTE epoxy finish in a conve-nient aerosol that’s every bit as easy and foolproof to apply as our other, great, bake-on, gun finishes. You get the quality of genuine GUN-KOTE backed by the Brownells no-hassle, com-plete satisfaction guarantee; an unbeatable combination!

Now you can easily apply the self-lubricating benefits of molyb-denum disulfide to alloy steel, stainless steel, brass and aluminum, even properly prepared nickel plating, in just minutes. Prepare, clean and pre-heat your part to 100°, spray on Brownells GUN-KOTE and allow the part to dry. Bake the part in an oven at 300° for one hour and you’re done. You’ve protected the metal parts of your valuable firearm from rust, corrosion, and scratches with a beautiful finish that will wear for years and help keep your gun looking just like new.

Brownells GUN-KOTE is a durable, second-generation epoxy, thermo-set resin finish that will not break down, peel or dissolve. In fact, once it’s applied, the only way to remove Brownells GUN-KOTE is to abrasive blast the part. It is resistant to all known gun solvents and thinners. Each coat is approximately .0004" thick so Brownells GUN-KOTE can be used on both internal and external parts where a close-tolerance fit is required without having to worry about interference. This makes Brownells GUN-KOTE the perfect, maintenance-free coating for handgun slides and frames, shotgun receivers and magazine tubes, rifle actions and bolts, anywhere you need an ultra-thin, self-lubricating, permanent coating that pro-tects and wears like crazy. abSPECS: Aerosol - 6 oz. (170 g) weight. Liquid - 8 fl. oz. (237 mL).

K-PHOS PRE-TREATMENT - Advanced phosphate liq-uid replaces the hot tank phosphating process to pro-vide protection against rust and corrosion, plus a superi-or crystalline bonding surface for Brownells GUN-KOTE finishes. K-PHOS chemically etches and instantly seals the metal surface to prevent rust prior to painting. Ap-plication requires surfaces to be completely degreased using Brownells TCE or KG3 Solvent Degreaser. Ma-chined surfaces can be abrasive blasted for maximum adhesion. Easy application: brush on, dip the parts, or spray on with air brush. Does not require thinning, and dries in 10 to 15 minutes for fast turn-around. Highly rec-ommended for use with GUN-KOTE on alloy steel, stainless steel, aluminum, and sound quality nickel and chrome plating. Meets MIL-C-490A and TT-C-490 specifications.SPECS: Liquid, clear. 8 fl. oz. (237 mL) or 16 fl. oz. (473 mL) plastic bottle.#665-000-013AV K-Phos, 8 oz., 5F15P73 � � � � � � � � � � � � � �$ 18.99#665-000-014AV K-Phos, 16 oz., 5F47F15 � � � � � � � � � � � � � � 57.99

GUN-KOTE™

OVEN CURE GUN FINISH

Genuine GUN-KOTE Spray-On/Bake-On Finish In Convenient Aerosol or Airbrush Liquid

STK# AEROSOL 6oz. STK# LIQUID 8oz. COLOR#083-051-001AV #083-166-006AV Matte Black

#083-051-002AV #083-166-001AV Gloss Black

#083-051-003AV NA Matte Brushed Stainless

#083-051-008AV NA Matte O. D. Green#083-051-009AV NA Matte Gray

#083-051-013AV #083-166-013AV Gloss Gunmetal Blue

NA #083-166-008AV Matte O. D. Green

NA #083-166-005AV Matte Dark Earth

— Advise # — Gun-Kote, Aerosol, 6 oz., 3H19J47 � � � � � � $ 23.37— Advise # — Gun-Kote, Liquid, 8 oz., 3H17Q88 � � � � � � � 24.99

Our high-efficiency oven is custom engi-neered to ensure uniform and complete part curing while delivering a “tough-as-nails” baked-on finish when using Brownells Gun-Kote or Tef-lon®/Moly oven cure finishes. Advanced technol-ogy combines two separate heating elements with a high-tech interior surface to optimize airflow and ensure consistent temperatures that help prevent hot spots, surface blemishes, and discolorations. Thermostat adjustable from 100° F to 400° F for precise temperature control dur-ing large or small production runs. Adjustable, 60 minute countdown timer turns oven on when set; audible bell alerts you when time is up, and oven turns off. Separate “constant on” position

works like a manual override to bypass the timer and allow oven run-times longer than 60 minutes. Front mounted temperature gauge provides accurate, real-time temperature monitoring. Oven panels are insulated with over 5 lbs. of high density, energy-saving fiberglass to prevent heat loss and reduce operating costs. Four, removable drying racks allow you to optimize interior space and maintain full capacity. Two ceiling mounts, with five holes each, al-low you to hang parts up to 42" long. Extra long power cord for easy setup in a variety of locations, plus a panel-mounted electrical fuse for fail-safe, overload protection. High-temp, matte black surface finish is corrosion resistant. Holds up to five barreled rifle actions, plus numerous handguns and small parts. Ships directly from manu-facturer� Please allow 30 additional business days for shipping� abSPECS: Steel, black matte, high-temp finish. 15" (38cm) long, 17" (43cm) wide, 481/2" (123cm) high. Internal Dimensions - 10" (25cm) long, 13" (33cm) wide, 44" (112cm) high. Temperature Range - 100° F (38°C) to 400° F (204°C). Current Draw - 7.4 amps 120 VAC. UL approved heating elements.

BAKE-ON FINISH CURING OVENProvides A Tough-As-Nails,

Oven-Baked Finish

#080-000-667AV Bake-On Finish Curing Oven, 7B2096F79 � � � � � � � � � � � � � � � � � � � � $ 2099.99

Provides a protective paint that won’t chip, crack, or flake; works great on any material. Hardener and paint form a chemical bond for durability and elasticity. Airbrush application gives a smooth finish. Dries in 10 minutes and fully cures overnight; speed cure in the oven at 110° F for 1 hour. abSPECS: Kit includes: 8 fl. oz. (237 ml) DuraCoat, black, matte; 1 fl. oz. (30 ml) Hardener; 15 fl. oz. (444 ml) Airbrush Propellant; 2 fl. oz. (59 ml) Reducer; 1 fl. oz. TruLube; (1) set of Measuring Spoons; (1) Ez Airbrush Kit; (1) pair Latex Gloves; (1) Particle Mask; Instructions. Finishes 2-4 firearms; additional propellant may be required.

DURAFIL - Two-part surface filler can be applied with an airbrush and covers pits, dings, and scratches. No thinning required. abSPECS: Kit contains: 4 fl. oz. (118 ml) bottle of DuraFil, 1/2 fl. oz. (14.8 ml) bottle of DuraCoat Hardener, and instructions.#100-001-005AV DuraFil Kit, 9K19P13 � � � � � � � � � � � � � � � � $ 20.50

CAMOPAKS - Paks of selected colors help you create distinctive camouflage patterns. abSPECS: Kits include different combinations of 2 fl. oz. (59 ml) jars of paint and 1 fl. oz. (30 ml) Hardener. Urban Tiger Stripe – Matte Black, Snow Gray, White; Vietnam Tiger Stripe – Woodland Tan, Matte Black, Tiger Stripe Green, Tiger Stripe Brown; Desert Storm – Matte Black, Desert Mint, Desert Beige, Desert Brown, White; Woodland Signature Series – Woodland Tan, Woodland Green, Woodland Camo Brown, Matte Black.

#100-001-006AV Urban Trigger Stripe Camopak, 9K37F29 � � � � � � � � � � � � � � � � � � � � � � � � � �$ 39.95

#100-001-008AV Desert Storm Camopak, 9K43I76 � � � 46.99#100-001-009AV Woodland Sig. Camopak,

9K37H29 � � � � � � � � � � � � � � � � � � � � � � � � � 39.95

LAUER CUSTOM WEAPONRY

DURACOAT PAINTING SYSTEM

#100-000-989AV Level II Starter Kit, 9K65N64 � � � � � � $ 79.99#100-000-996AV 4 oz. Reducer, 9K9Q25 � � � � � � � � � � � 9.49#100-001-001AV 2 oz. Hardener, 9K10N67 � � � � � � � � � 11.50#697-000-001AV 15. oz. Airbrush Propellant,

7F10F06 � � � � � � � � � � � � � � � � � � � � � � � � � 11.99#100-001-002AV 4 oz. DuraCoat, Mat Blk, 9K23I29 � � 24.95#100-007-956AV 4 oz. DuraCoat, Tactical Black,

9K23K29 � � � � � � � � � � � � � � � � � � � � � � � � 24.95#100-007-949AV 4 oz. DuraCoat, Semi-Gloss Black,

9K23P29 � � � � � � � � � � � � � � � � � � � � � � � � 24.95#100-007-952AV 4 oz. DuraCoat, Magpul Flat Dark

Earth, 9K23A29 � � � � � � � � � � � � � � � � � � 24.95#100-001-004AV 4 oz. DuraCoat, O.D. Green,

9K23B29 � � � � � � � � � � � � � � � � � � � � � � � � 24.95#100-007-955AV 4 oz. DuraCoat, Tactical O.D. Green,

9K23I29 � � � � � � � � � � � � � � � � � � � � � � � � � 24.95#100-011-775AV 4 oz. DuraCoat, White, 9K23K29 � � � 24.95#100-007-939AV 8 oz. DuraCoat, Matte Black,

9K36G36 � � � � � � � � � � � � � � � � � � � � � � � � 38.95#100-007-936AV 8 oz. DuraCoat, Tactical Black,

9K36L36 � � � � � � � � � � � � � � � � � � � � � � � � 38.95#100-007-923AV 8 oz. DuraCoat, Semi-Gloss Black,

9K36J36 � � � � � � � � � � � � � � � � � � � � � � � � 38.95#100-007-932AV 8 oz. DuraCoat, Magpul Flat Dark

Earth, 9K36L36 � � � � � � � � � � � � � � � � � � 38.95

Durable Finish Protects Any

Gun Part

Get fast, even spray application with pinpoint accuracy. Perfect for ap-plying Brownells Aluma-Hyde II®, Bak-ing Lacquer, and Teflon®/Moly Oven Cure Gun Finish to metal surfaces. Use with your air compressor or other air source. Requires 1 cfm, clean, dry air at 20-45 psi. 3 fl. oz. (88.7 ml) color bottle for large jobs available separately. abSPECS: Kit includes H-5 single-action airbrush, 1/4" (6.4mm) x 6′ (182.9cm) air hose w/couplings, 2 air caps, 1/4 fl. oz. (7.5 ml) color cup, 1 fl. oz. (30 ml) color bottle, 1 fl. oz. plain bottle, adjustment wrenches, hanger, and instructions.

PAASCHE H-SET AIRBRUSH KIT

Easily Apply Baking Lacquer, Stock Finishes & More

#697-105-000AV H-5 Airbrush Kit, 7F54C86 � � � � � � � � � � $ 64.99#697-105-004AV 1 oz. Color Bottle Assembly,

7F4C06 � � � � � � � � � � � � � � � � � � � � � � � � � � � 5.99#697-105-103AV 3 oz. Color Bottle Assembly,

7F6P44 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 7.99

PAGE 402 Office/Tech: 641-623-5401GUARANTEED. FOREVER.®

SINCE 1939

SPR

AY

-ON

FIN

ISH

ES

STOCK # COLOR#100-003-852AV Graphite Blk#100-003-856AV O.D. Green#100-003-854AV Sniper Gray#100-003-855AV Coyote Tan#100-003-853AV Stainless#100-004-739AV Desert Sand

STOCK # COLOR#100-004-740AV Dark Earth#100-011-644AV Magpul Flat

Dark Earth#100-017-329AV High-Gloss

Clear#100-017-330AV Matte Clear

— Advise # — Air Dry Cerakote, 4N29N64 � � � � � � � � � � � �$ 39.99

AIR DRY CERAKOTE

State-of-the-art, Cerakote™ Fire-arm Coatings provide a durable, weath-er- and corrosion-proof, ceramic-based protective finish that resists scratching, chipping, and abrasive cleaning sol-vents. Hardener and paint chemically bond into an ultra-thin coating that ad-heres to almost any surface for a clean,

professional finish. Apply with an airbrush or HVLP touch-up gun for a smooth finish. Oven Cure Kit requires oven baking for 2 hours at 250° for optimal cure or 1 hour at 300° for quick cure. For heat-sensitive materials such as plastics, a 2 hour cure at 200° is adequate. Oven Cure Refill lets you order more paint and hardener only. Air Dry requires no baking and is tack free in 40 minutes, completely dry in 24 hours, and fully cured in 5 days. abSPECS: Oven Cure Kit includes 4 fl. oz. (118 ml) Cerakote, .17 fl. oz. (5ml) hardener, 3.4 fl. oz. (100 ml) graduated cylinder, (4) funnel filters, and instructions. Large Graphite Black kit comes with 32 fl. oz. (946ml) Cera-kote™, 4 fl. oz. (118ml) hardener, graduated cylinder, (4) funnel filters, and instructions. Oven Cure Refill - Includes 4 fl. oz. Cerakote, .17 fl. oz. hardener, (4) funnel filters, and instructions. Air Dry Kit - Premixed and includes 4 fl. oz. Cerakote, (4) funnel filters, and instructions. Finishes up to 6 handguns or 2 to 3 long guns.

NIC INDUSTRIES

CERAKOTE™ CERAMIC COATINGSTough, Durable Coatings For

Maximum Protection

#100-005-611AV Large Oven Cure Kit, Graphite Black, 4N92J86 � � � � � � � � � � � � � � � � � � � � � � � � � $ 101.99

OVEN CURE CERAKOTE

STK# KIT STK# REFILL COLOR#100-003-743AV #100-003-857AV Graphite Black#100-003-744AV #100-003-861AV O.D. Green#100-003-747AV #100-003-859AV Sniper Gray#100-003-745AV #100-003-860AV Coyote Tan#100-003-746AV #100-003-858AV Stainless#100-004-735AV #100-004-737AV Desert Sand#100-004-736AV #100-004-738AV Dark Earth#100-011-643AV #100-011-640AV Magpul Flat Dark Earth#100-011-642AV #100-011-641AV Burnt Bronze#100-005-611AV NA Graphite Black (Large Kit)— Advise # — Cerakote Oven Cure Kit, 4N37P50 � � � � � �$ 46.99— Advise # — Cerakote Oven Cure Refill, 4N29L64 � � � � 34.99

Kit contains the required brushes to clean all parts of an airbrush. Large polymer-handled brush helps clean paint cups and jars, and molded grip keeps the brush in your hand. Braided stainless-steel core brushes feature spiral poly bristles ranging from 11mm diameter down to only 2 mm diameter to let you clean hard-to-get spaces such as inside tubes and nozzles. Loop ends on steel brushes let you organize them on included split ring. SPECS: Large brush, polymer, 7" (17.7cm) long. Steel brushes: (1) 6"(15.2cm) long. (5) 4" (10cm) long.

PAASCHE AIRBRUSH CLEANING KITKeeps The Paint Flowing Smoothly

#697-000-002AV Airbrush Cleaning Kit, 7F16H60 � � � � � $ 19.99

Miniature spray gun attaches to com-mon shop air hoses and provides precise

control over spray patterns, even with high-viscosity metallic paints. Gives performance similar to popular RG-3 spray gun. Spray pattern can be adjusted from round to full-fan shape. Gravity-feed cup will work with small amounts of paint without spitting, making it ideal for painting firearms. Cup roates, allowing gun to spray from any angle or position. Includes spray gun, cup and air chuck. abSPECS: Stainless steel spray gun and cup. Spray pattern adjusts from 1/8" (3mm) to 6" (15.2cm) wide

Handles High-Viscosity Paint Without Spitting

#100-014-852AV Baby Series Spray Gun, 4N347A46 � � $ 370.00

NIC INDUSTRIES

BABY SERIES SPRAY GUN

A strong, waterproof, nonreflective tape for se-cure but temporary attachment of pressure switches or as camo to break up your gun’s silhouette. Use to tape down zippers, swivels, straps and other sources of noise that could give away your position during stealthy operations. Has a thousand and one other uses in the field, in the armory, or on your workbench. This is vinylcoated, high thread count cloth tape, not cloth reinforced vinyl “duct” tape. Tears off the roll clean and straight. High-tack, synthetic rubber adhesive won’t leave behind sticky residue and provides excellent adhesion and conformability over a wide temperature range. 42 lb. per inch tensile strength means this tape won’t come loose during stressful tactical operations. Once you’ve used this stuff, you won’t settle for ordinary electrical or duct tape ever again! abSPECS: Vinyl coated cotton cloth, synthetic rubber resin adhesive. 1" (2.5cm) wide, 180′ (55m) long, .001" (12 mil) thick. Available in Black and Coyote Brown.

TACTICAL TAPESecure Temporary Attachment Of Tactical Gear

To Weapons

#100-002-654AV Tactical Tape, Black, 5A00HML � � � � � � �$ 14.99#100-002-656AV Tactical Tape, Coyote Brown,

5A19N93 � � � � � � � � � � � � � � � � � � � � � � � � � � � 23.99

Strong, yet flexible polyester tape with-stands sustained temperatures up to 400° F (204° C), making it the perfect masking me-dium to use with Brownells Baking Lacquer, Gun-Kote™, Teflon®/Moly Oven Cure Gun

Finish, and similar oven-cured finishing products. Minimal-bulk, .002" thick polyester backing conforms easily to curves and irregular shapes, yet won’t shred when tape is removed. Translucent, so you can see the workpiece underneath as you apply the tape to help you position it precisely. Advanced silicone adhesive grabs tightly and won’t pucker, and pulls off clean with no residue. abSPECS: Polyester backing, green, silicon adhesive. Sold in 72 yard (65.8m) rolls, in widths listed below.

HIGH TEMPERATURE MASKING TAPEUse With Oven-Cure Finishes—

Withstands 400° F Heat

#080-000-611AV 1/4" High Temp Masking Tape, 8K3G77 � � � � � � � � � � � � � � � � � � � � � � � � � � � � $ 4.99

#080-000-612AV 1/2" High Temp Masking Tape, 8K5H32 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 6.99

#080-000-613AV 1" High Temp Masking Tape, 8K9M86 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 11.99

#080-000-614AV 2" High Temp Masking Tape, 8K20L89 � � � � � � � � � � � � � � � � � � � � � � � � � � � 22.99

Don’t take chances with your health — wear a respirator any time you apply Brownells spray-on

finishes, grind, sand, or come in contact with any particulates that don’t belong in your lungs. The NIOSH-approved 6300 Respira-tor provides superior protection from paint and pesticide vapors, solvents, glue, mists, and other airborne particulates. Flexible half-mask face piece is lightweight and comfortable to wear; dual elastic headbands won’t pinch or bind. Disposable filter elements are easy to replace, plus the modular construction allows fast disassembly for cleaning. abSPECS: Respirator Kit includes face piece, (2) organic vapor cartridges, (2) filters and (2) filter covers. 10.2 oz. (289g) wt.

6300 RESPIRATORKeep Your Lungs Safe & Clear; Top Protection

For Gunsmiths & Hobbyists

#100-004-597AV 6300 Respirator Kit, 9Z39F99 � � � � � � � �$ 42.99#100-004-594AV Replacement Particulate Filter, each,

6K2I45 � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99#100-004-596AV Replacement Filter Retainer, each,

4H2E43 � � � � � � � � � � � � � � � � � � � � � � � � � � � � 2.99

SPRAY-ON, BAKE-ON FINISHES

BROWNELLS GUN KOTE™ This is the long-time, industry stan-

dard, now available in an aerosol can. It gives a thin, extremely tough, bake-on finish with the lubricating qualities of molybdenum disul-fide. Thickness buildup is minimized without sacrificing abrasion or chemical resistance. Recommended for application on aluminum-oxide-blasted surfaces only. Slightly less for-giving than Baking Lacquer or Teflon/Moly where cleaning and spraying techniques are concerned.

ALUMA-HYDE® II Brownells Aluma-Hyde® II is a high-grade,

air-dry, epoxy paint for use on aluminum alloys, steel, fiberglass and plastics. Available in aero-sol only, it gives a very tough finish, resistant to scratches and dings and is not affected by the solvents and oils used in the firearms industry. It even stands up to most of the new “miracle” bore cleaners. Available in colors to match blued and stainless steel parts, Parkerizing, stocks, etc.

METAL-COAT EPOXY™ Brownells Metal-Coat is a clear, tough,

air-dry, epoxy paint that’s the ideal choice to protect polished or bead-blasted steel, alu-minum or brass surfaces. One coat from the aerosol can provides superb rust resistance, additional coats bond into the base coat for more scratch protection. Holds up well to gun oils and solvents although some of to-day’s most aggressive, “super” bore cleaners may damage it. The soft lustre looks great and maintains the beauty of color case hardened steel.

SPRAY ON FINISHES

ALUMA-HYDE II®

GUN-KOTE™

OVEN CURE FINISHMETAL-COAT EPOXY™

• Fast & easy to apply• Many colors to choose from• Tougher & more durable

than paint• Economical alternative to

bluing or Parkerizing

GIVE YOUR GUN THE CAMO

PATTERN YOU NEED WITH

WATCH OUR SPRAY-ONPAINT SERIES AT

brownells.com