alumina & zirconia
TRANSCRIPT
Bioceral® ISO6474 Alumina
A « classical » in ceramic products
Biozyr® ISO13356 Zirconia
Unmatched mechanical performances
H I P
S P I N E T M C
D E N T A L 20 years of success in orthopaedic
Hard couple ceramic / ceramic : a very
low wear rate
Significant reduction in osteolysis
Rapid Osseointegration
Great stability over time
Difference of form < 0,3 µm
Surface roughness <0,01 µm
Can be easily incorporated into your
current range of implants
Production capacities
Conception and methods equipped with CAD / CAM / CAPM
Machining directly from your solids
Isostatic pressing
High temperature sintering, regulation in degree during all the
cycle.
High precision diamond machining 3 to 5 axes
Cylindrical, spherical and surface grinding
Optical quality honing
Controls : 3D, optical without contact, surface roughness,
geometric, dimensional realized in air-conditioned laboratory
Laser marking
Assembly possible in clean room under laminar flow
Visual inspection X4 X6 white and black light.
Our team HTI is ready to assist you in developing your ceramic
components : conception by mixing ceramics, design and con-
straints, the production and control during the development of
your prototype, service quality that will validate all key phases
for the production of your parts ...
Taylor-made developments
HTI Technologies 49 av Franklin Roosevelt F-69150 Décines Cedex Tel :+33/4 72 02 56 96 Fax : +33/4 78 49 97 35 www.htitechnologies.com
PROCESS MASSIVE
- Dimensional controls - Geometric controls
- Control dimensional - Control geometric
- Visual inspection
- Visual inspection - Dimensional controls - Geometric controls
ORDER POWDER
Validation process by IQ OQ PQ methods
CONCEPTION
PLANNING
PRESSING
ORDER
GRINDING
SINTERING
PACKAGING
CONTROL
HONING
MARKING
MACHINING
CONTROL
Advanced ceramics
V2
.20
09
STOCK