alvac v · • gost (tr and rtn) • api 6a and api 6d • ta-luft • quality programs fully...
TRANSCRIPT
Pressure rating: up to 2000 psi Sizes: NPS ¼ – 2 (DN 8 – 50)
Valvac General purpose ball valves
2 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
Velan’s PrOFIle
VELAN AT A GLANCE
History • Founded in 1950
Sales • Over $500 million
People • Over 2,000 employees
Product lineA world-leading range of valves across all major industrial applications: • Cast steel gate, globe, check,and ball valves
• Forged steel gate, globe, check, and ball valves
• Triple-offset butterfl y valves • Knife gate valves • severe service valves • Bellows seal valves • steam traps
QualityAll major certifi cations and approvals • AsME N stamp and NPT for nuclear valves (since 1970)
• IsO 9001 (since 1991) Currently certifi ed to IsO 9001:2008
• PED • GOsT (TR and RTN) • API 6A and API 6D • TA-Luft • Quality programs fully compliant with IsO-9001, NCA 4000, AsME NQA-1 and 10 CFR 50 Appendix B, surveyed by AsME and audited by NUPIC, Northrop Grumman Newport News, DCMA, utilities, architect/ engineers, and other organizations from around the world
Headquartered in Montreal, Velan has several international subsidiaries. For general inquiries:
Velan head offi ce:7007 Côte de Liesse, Montreal, QC H4T 1G2 Canada
Tel: +1 514 748 7743 Fax: +1 514 748 8635
Check our website for more specifi c contact information.
www.velan.com
© 2014 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confi dential and proprietary to Velan. Any unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The material in this catalog is for general information only and shall not be used for specifi c performance data and material selection without fi rst consulting Velan. Velan reserves the right to change this information without notice. Velan does not accept any liability or damages arising from the use of information in this catalog. Velan Valves, Velan, Memoryseal, Torqseal, Velfl ex, Adaxie, and RAMA are trademarks or registered trademarks of Velan Inc. and/or another Velan company. Stellite® is a registered trademark of Kennametal Stellite™, a wholly owned subsidiary of Kennametal Inc. All other trademarks and registered trade-marks are owned by their respective companies.
TABLE OF CONTENTSVelan’s profile ............................................. 2
Velan’s global network ............................ 3
VOP-1000 one-piece reduced port ........................... 4
VEE-2000 full and regular port end-entry............... 5
V3P-1000 three-piece full port ................................. 6
How to order................................................ 7
Velan is one of the world’s leading manufacturers of cast and forged steel gate, globe, check, ball, triple-offset, knife gate, highly engineered severe service valves, and steam traps offering superior performance across all major industrial applications including: fossil, nuclear, and cogeneration power; oil and gas; refining and petrochemicals; chemicals and pharmaceutical; LNG and cryogenics; marine; HVAC; mining; water and wastewater; pulp and paper; and subsea.The company also supplies actuators and integrated control packages.
Founded in 1950, Velan has earned a reputation for product excellence and innovation by bringing to the market superior products with special emphasis on quality, safety, ease of operation, and long service life. Velan valves have an extremely broad installation base and are approved by major companies worldwide.
The Velan Valvac line is a contractor-grade ball valve intended for general services such as utilities and WOG rated requirements. Should you have requirements for process applications please refer to our Memoryseal® catalog.
Our Memoryseal® design is ideally suited for process applications due to superior features such as E20 packing chambers, fire test to API 607/ISO 10497, pre-drilled mounting pads for actuation, and our patented Memoryseal® flexible seats.
North America
Manufacturing plants
Head office
Europe Asia
Distribution centers
• 17 production facilities • 5 plants in North America • 6 plants in Europe • 6 plants in Asia
• 5 stocking and distribution centers • Hundreds of distributors worldwide • Over 60 service shops worldwide
Williston, VT, U.S.A. Velan Valve Corp., Plant 3
Lucca, Italy Velan ABV S.p.A., Plant 1
Lisbon, Portugal Velan Válvulas Industriais, Lda.
Montreal, Canada Velan Inc., Plant 5
Houston, TX, U.S.A. VelTEX
Willich, Germany Velan GmbH
Taichung, Taiwan Velan Valvac Mfg. Co., Ltd.
Suzhou, China Velan Valve (Suzhou) Co., Ltd.
Coimbatore, India Velan Valves India Pvt. Ltd.
Granby, Canada Velan Inc., Plant 4 and 6
Leicester, UK Velan Valves Ltd.
Marietta, GA, U.S.A. VelEAST
Ansan City, South Korea Velan Ltd., Plant 3
Montreal, Canada Velan Inc., Plant 2 and 7
Mennecy, France Segault S.A.
Benicia, CA, U.S.A. VelCAL
Ansan City, South Korea Velan Ltd., Plant 2
Montreal, Canada Velan Inc., Plant 1
Lyon, France Velan S.A.S.
Granby, Canada VelCAN
Ansan City, South Korea Velan Ltd., Plant 1
Montreal, Canada Velan Inc.
Lucca, Italy Velan ABV S.p.A., Plant 2
– ASME N-stamp accredited manufacturer
Velan’s glObal netwOrk
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 3
ONE-PIECE REDUCED PORT GENERAL PURPOSE BALL VALVENPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS
PRES
SURE
- PS
I
1000
900
800
400
300
200
100
0 100 200 300 400 500°F
50 100 200150 250°CTEMPERATURE
PRES
SURE
- BA
R7
14
21
28
35
49
69
500
600
700
PRESSURE TEMPERATURE RATING (WCB)
42
56
63
0
VOP-1000 NPS ¼–2 (DN 8–50), RPTFE seats, reduced port
4 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
A
D
B
E
PART STAINLESS STEEL CARBON STEEL(1)
Body CF8M WCB Seat RPTFE RPTFE Ball SS 316 SS 316 Stem SS 316 SS 316 Seat retainer SS 316 Carbon steel Thrust washer RPTFE RPTFE Body seal RPTFE RPTFE Stem packing PTFE PTFE Stem washer SS 304 SS 304 Stem nut SS 304 SS 304 Gland follower SS 304 SS 304 Handle / latch (2) SS 304 SS 304
STANDARD MATERIALS
(1) NPS ¼ and 3⁄8 (DN 8 and 10) sizes available only in SS body.(2) Latch lock available only on NPS ½ — 2 (DN 15 — 50) sizes.
SIZE VOP-1000 MANUAL Cv
WEIGHT NPS A B D E lb/kg DN 1⁄4 2.64 2.28 1.73 0.23 0.18 8 67 58 44 6 2.5 0.08 3⁄8 3.19 2.28 1.91 0.33 0.24 10 81 58 49 8 3.5 0.11 1⁄2 3.80 2.50 2.36 0.35 0.44 15 97 64 60 9 4.8 0.20 3⁄4 3.80 2.67 2.40 0.49 0.57 20 97 68 61 12 9.5 0.26 1 4.73 3.33 2.91 0.63 0.93 25 120 85 74 16 14 0.42 11⁄4 4.73 3.55 3.07 0.79 1.48 32 120 90 78 20 33 0.67 11⁄2 5.97 3.88 3.37 0.98 2.00 40 152 99 86 25 45 0.91 2 5.97 4.29 4.02 1.26 3.31 50 152 109 102 32 58 1.50
DIMENSIONS AND WEIGHTS
Velan ValVac VOP-1000
Figure number
Carbon s-L0302-ssGA
CF8M s-L0313-ssGA
FULL AND REGULAR PORT END-ENTRY GENERAL PURPOSE BALL VALVENPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 5
50 100 200150 250°C
PRESSURE TEMPERATURE RATING (WCB)
PRES
SURE
- PS
I
600
400
200
00 100 200 300 400 500°F
TEMPERATURE
PRES
SURE
- BA
R
800
1000
1200
1400
1600
1800
2000
42
28
14
56
69
83
96
110
124
138NPS ¼–1(DN 8–25)
0
VEE-2000 NPS ¼–2 (DN 8–50), RPTFE seats
NPS 1¼–2(DN 32–50)
DIMENSIONS AND WEIGHTS
A
D
B
E
PART STAINLESS STEEL CARBON STEEL(1)
Body CF8M WCB End cap CF8M WCB Seat RPTFE RPTFE Ball SS 316 SS 316 Stem SS 316 SS 316 Thrust washer RPTFE RPTFE Body seal PTFE PTFE Packing ring PTFE or RPTFE PTFE or RPTFE Packing nut SS 304 SS 304 Handle SS 304 SS 304 Handle / latch SS 304 SS 304 Handle nut SS 304 SS 304
STANDARD MATERIALS
(1) NPS ¼ and 3⁄8 (DN 8 and 10) sizes available only in SS body.
SIZE VEE-2000 MANUAL Cv WEIGHT
NPS A B D E lb/kg
DN Full Reg. Full Reg. Full Reg. Full Reg. Full Reg. Full Reg port port port port port port port port port port port port
1⁄4 4.57 4.57 2.10 2.10 2.20 2.20 0.44 0.44 0.66 0.66 8 116 116 53 53 56 56 11 11 8 8 0.30 0.30 3⁄8 4.57 4.57 2.10 2.10 2.20 2.20 0.44 0.44 0.62 0.62 10 116 116 53 53 56 56 11 11 10 10 0.28 0.28 1⁄2 4.57 4.57 2.09 2.10 2.39 2.35 0.50 0.44 0.62 0.62 15 116 116 53 53 61 60 13 11 13 12 0.28 0.28 3⁄4 5.10 5.10 2.43 2.29 3.00 2.83 0.81 0.62 1.41 1.10 20 130 130 62 58 76 72 21 16 50 15 0.64 0.50 1 5.10 5.10 2.83 2.99 3.56 3.31 1.00 0.81 2.27 1.70 25 130 130 72 76 90 84 25 21 93 35 1.03 0.77 11⁄4 8.09 8.09 3.32 3.14 3.99 4.05 1.25 1.00 3.73 3.53 32 205 205 84 80 101 103 32 25 170 64 1.69 1.60 11⁄2 8.09 8.09 3.51 3.32 4.42 4.33 1.50 1.25 4.87 4.50 40 205 205 89 84 112 110 38 32 250 87 2.21 2.04 2 8.09 8.09 3.84 3.51 4.92 5.42 2.00 1.50 7.59 6.22 50 205 205 98 89 125 138 51 38 450 112 3.44 2.82
Velan ValVac Vee-2000
Full port Figure number
Carbon s-M1102-ssGA
CF8M s-M1113-ssGA
Regular port Figure number
Carbon s-M0102-ssGA
CF8M s-M0113-ssGA
6 Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved.
THREE-PIECE FULL PORT GENERAL PURPOSE BALL VALVE NPS ¼ – 2 (DN 8 – 50)
CARBON OR STAINLESS STEEL BODY, RPTFE SEATS, THREADED OR WELD ENDS
SIZE V3P-1000 MANUAL Cv
WEIGHT NPS A B D E lb/kg DN 1⁄4 4.22 2.28 2.50 0.42 0.99 8 107 58 64 11 8 0.45 3⁄8 4.22 2.28 2.50 0.50 0.99 10 107 58 64 13 10 0.45 1⁄2 5.03 2.50 2.90 0.55 1.46 15 128 64 74 14 13 0.66 3⁄4 5.03 2.67 3.23 0.80 1.98 20 128 68 82 20 50 0.90 1 5.68 3.33 3.58 1.00 3.09 25 144 85 91 25 93 1.40 11⁄4 5.68 3.55 4.37 1.25 4.85 32 144 90 111 32 170 2.20 11⁄2 8.22 3.88 4.84 1.50 6.84 40 209 99 123 38 250 3.10 2 8.22 4.29 4.71 2.00 10.14 50 209 109 120 51 450 4.60
DIMENSIONS AND WEIGHTS
PRES
SURE
- PS
I
1000
900
800
400
300
200
100
0 100 200 300 400 500°F
50 100 200150 250°CTEMPERATURE
PRES
SURE
- BA
R7
14
21
28
35
49
69
500
600
700
PRESSURE TEMPERATURE RATING (WCB)
42
56
63
0
V3P-1000 NPS ¼–2 (DN 8–50), RPTFE seats, Full port PART STAINLESS STEEL CARBON STEEL Body CF8M WCB
End cap CF8M WCB
Seat RPTFE RPTFE
Ball SS 316 SS 316
Stem SS 316 SS 316
Stem packing RPTFE RPTFE
Thrust washer RPTFE RPTFE
Body Seal PTFE PTFE
Body nuts & bolts SS 304 B7
Packing nut SS 304 SS 304
Handle nut SS 304 SS 304
Handle / latch SS 304 SS 304
Packing washer SS 304 SS 304
STANDARD MATERIALS
A
D
B
E
Velan ValVac V3P-1000
Figure number(1)
Carbon s-K1802-ssGA
CF8M s-K1813-ssGA
(1) Figure number shown is for threaded end valves, see “How to Order Chart” on page 7 for other types of connections available.
Velan reserves the right to change this information without notice. © 2014 Velan Inc. All rights reserved. 7
D PORT
0 Regular port 1 Full port
E TYPE
1 End-entry (two-piece) 8 Three-piece valve (bolted)
3 One-piece/Unibody
C MODEL NUMBER / CLASS
Model number Class
K V3P-1000 0 150
L VOP-1000 1 300
M VEE-2000
A TYPE OF CONNECTION
B Butt weld
S Thread NPT
W socket weld
B SIZE OF CONNECTIONCustomers have the choice of specifying valve size as part of the valve figure number (B) using the numbers below, or indicating valve size separately. sizes shown in NPs (DN)EXAMPLES: B16-3054P-02Ts (valve size is part of figure number) NPs 10 B-3054P-02Ts (valve size is shown separately)
01 1/4 (8) 05 1 (25)
02 3/8 (10) 06 1-1/4 (32)
03 1/2 (15) 07 1-1/2 (40)
04 3/4 (20) 08 2 (50)
F BODY MATERIAL
02 A105, WCB 13 CF8M
Velan ValVac general PurPOse ball ValVes
The figure numbers shown on this key cover essential features of Velan Valvac valves. Please use these figure numbers to ensure prompt and accurate processing of your order.
Type of connection Size of connection Model number/Class Port Type Body material Trim Seat material Special service
A B C D E F G H I
— — S 0 5 — L 0 3 0 2 — S S G A
Example: NPs 1 (DN 25), threaded, VOP-1000, regular port valve in carbon steel with stainless steel trim, and glass-reinforced PTFE seat for standard service.
G TRIMCode Ball Stem
SS 316 316
H SEAT MATERIAL
G Glass-reinforced PTFE
I SPECIAL SERVICE
A standard
BRO-FLB SAS-FLB ABV-FLB VEL-PS CAT-CSV
CAT-BV VEL-MS CAT-PBV BRO-CBV CAT-GPBV
CAT-CSSV CAT-SFV CAT-BG CAT-KGV CAT-DPCV
CAT-BF SAS-CCV VEL-BS VEL-CRYO CAT-ST
© 2014 Velan Inc., Montreal, QC, Canada. All rights reserved. The contents hereof are confidential and proprietary to Velan. Any unauthorized reproduction or disclosure, in whole or in part, is strictly prohibited. The material in this catalog is for general information only and shall not be used for specific performance data and material selection without first consulting Velan. Velan reserves the right to change this information without notice. Velan does not accept any liability or damages arising from the use of information in this catalog. Velan Valves, Velan, Memoryseal, Torqseal, Velflex, Adaxie, and RAMA are trademarks or registered trademarks of Velan Inc. and/or another Velan company. Stellite® is a registered trademark of Kennametal Stellite™, a wholly owned subsidiary of Kennametal Inc. All other trademarks and registered trademarks are owned by their respective companies.
Headquartered in Montreal, Canada, Velan has several international subsidiaries. For general inquiries:
Velan head office 7007 Côte de Liesse, Montreal, QC H4T 1G2 Canada Tel: +1 514 748 7743 Fax: +1 514 748 8635
Check our website for more specific contact information.
www.velan.com
Printed in Canada
ASME pressure classes 150–4500 in carbon, alloy, and stainless steel
The most comprehensive line of industrial forged and cast steel gate, globe, check, ball, butterfly, and knife gate valves and steam traps.
CAT-GPBV-07-14