american association df state highway and … 1b... · american association df state highway and...
TRANSCRIPT
AMERICAN ASSOCIATION DF STATE HIGHWAY AND
TRANSPORTATION OFFICIALS
AASH 0 THE Vorc:::E OF TRANSPOR ATION
PART 1-STANDARD SPECIFICATIONS AND STANDARD PRACTICES
Number
AGGREGATES
M6-13
M 17-11
M29-12
M 43-05 (2013)
M 45-06 (2010)
M 80-13
M 195-11
M 327-11
Table of Contents
SUBJECT SEQUENCE
Title Page
Fine Aggregate for Hydraulic Cement Concrete ................................ M 6-1
Mineral Filler for Bituminous Paving Mixtures ................................. M 17-1
Fine Aggregate for Bituminous Paving Mixtures .............................. M 29-1
Sizes of Aggregate for Road and Bridge Construction .................... :. M 43-1
Aggregate for Masomy Mortar .......................................................... M 45-1
Coarse Aggregate for Hydraulic Cement Concrete ............................ M 80-1
Lightweight Aggregates for Strnctural Concrete ............................... M 195-1
Processing Additions for Use in the Manufacture of
Hydraulic Cements··································································:········· M 327-1
BITUMINOUS MATERIALS
M 81-92 (2012)
M 82-75 (2012)
M 140-13
M 156-13
M 208-01 (2013)
M 226-80 (2012)
M 303-89 (2014)
M 316-13
M320-10
M 32,3c13
M 325-08 (2012)
M 332-14
R 5-13
R 15-00 (2012)
R 26-01 (2013)
R 28-12
Cutback Asphalt (Rapid-Curing Type) .............................................. M 81-1
Cutback Asphalt (Medium-Curing Type) .......................................... M 82-1
Emulsified Asphalt ............................................................................ M 140-1
Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures .............................................. M 156-1
Cationic Emulsified Asphalt .............................................................. M 208-1
Viscosity-Graded Asphalt Cement..................................................... M 226-1
Lime for Asphalt Mixtures ................................................................. M 303-1
Polymer-Modified Cationic Emulsified Asphalt... ............................. M 316-1
Performance-Graded Asphalt Binder. ................................................ M 320-1
Superpave Volumetric Mix Design .............................. "···················· M 323-1
Stone Matrix Asphalt (SMA) ............................................................. M 325-1
Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test... ................................................................... M 332-1
Selection and Use of Emulsified Asphalts ......................................... R 5-1
Asphalt Additives and Modifiers ....................................................... R 15-1
Ce1tifying Suppliers of Performance-Graded Asphalt Binders .......... R 26-1
Acclerated Aging of Asphalt Binder Using a Pressurized Aging V ess1>l (PAV) .. . . . . . . . .. .. . . .. .. .. ................. .. .. ... . . . . . . . . . . . . ... . . . .. . . ... .. .. R 28-1
xi
Volume
IA
IA
IA
IA
IA
IA
IA
lB
IA
IA
IA
IA
IA
IA
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
Number
R 29-14
R 30-02 (2010)
R35-14
R 46-08 (2012)
R47-14
R 49-09 (2013)
R 59-11
R 62-13
Title Page
. Grading or Verifying the Performance Grade (PG) of an Asphalt Binder ................................................................................... R 29-1
Mixture Conditioning of Hot Mix Asphalt (HMA) ........................... R 30-1
Superpave Volumetric Design for Asphalt Mixtures ......................... R 35-1
Designing Stone Matrix Asphalt (SMA) ............................................ R 46-I
Reducing Samples of Hot Mix Asphalt (HMA) to Testing Size ........ R 47-1
Determination of Low-Temperature Performance Grade (PG) of Asphalt Binders ............................................................................. R 49-1
Recovery of Asphalt Binder from Solution by Abson Method.......... R 59-1
Developing Dynamic Modulus Master Cnrves for Asphalt Mixtures ................................................................................ R 62-1
BOX CULVERT, CULVERT PIPE, AND DRAIN TILE
M36-14
M 86M/M 86-09 (2013)
M 167M/M 167-14
M I70-14
M I70M-14
M 175M/M 175-05 (2013)
M 176M/M 176-07 (20I2)
M l 78M/M 178-07 (20I2)
M I90-04 (2012)
M I9o-92 (20I2)
M I97-06 (2011)
M 199M/M 199-14
M 206M/M 206-14
M 207M/M 207-14
M 218-03 (2011)
Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains ....... M 36-I
Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe ........ M 86M/ M86-1
Cmrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches ................................ M I67M/
M 167-1
Reinforced Concrete Culvert, StmmDrain, and Sewer Pipe ............. M 170-1
Reinforced Concrete Culvert, Stonn Drain, and Sewer Pipe [Metric] ...................................................................................... M I 70M-l
Perforated Concrete Pipe ................................................................... MI 75M/ M 175-1
Porous Concrete Pipe ......................................................................... M l 76M/ M 176-I
Concrete Drain Tile ........................................................................... Ml 78M/ M 178-1
Bituminous-Coated Conugated Metal Culvert Pipe and Pipe-Arches ................................................................................. M 190-1
Corrugated Aluminum Pipe for Sewers and Drains ........................... M 196-1
Aluminum Alloy Sheet for Corrugated Aluminum Pipe .................... M 197-I
Precast Reinforced Concrete Manhole Sections ................................ M I99M/ M 199-1
Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe ................................................................................... M 206M/
M206-l
Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe ................................................................................... M 207M/
M207-l
Steel Sheet, Zinc-Coated (Galvanized), for Corrugated Steel Pipe ........................................................................................... M 218-I
xii
Volume
lB
lB
lB
lB
lB
lB
lB
lB
lA
IA
IA
IA
lA
IA
. IA
IA
IA
IA
IA
IA
IA
IA
IA
Number Title Page Volume
M 219-92 (2012) Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches ........................................................... M 219-1 !A
M 242M/M 242-14 Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe ................................................................................... M 242M/ IA
M242-l
M 243-96 (2012) Field-Applied Coating of Corrugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches ..................................................... M 243-1 IA
M 245-00 (2012) Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains .......................................................................................... M 245-1 IA
M 246-05 (2011) Steel Sheet, Metallic-Coated and Polymer-Precoated, for Corrugated Steel Pipe ................................................................... M 246-1 IA
M 252-09(2012) Corrugated Polyethylene Drainage Pipe ............................................ M 252-1 IA
M 259-11 Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers .................................................................. M 259-1 IA
M 259M-l I Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] .............................................................. M 259M-l IA
M 262-11 Concrete Pipe and Related Products .................................................. M 262-1 IA
M 273-11
M273M-ll
M 274-87 (2012)
M 278-14
M 289-91 (2012)
M294-13
M 304-11
M 306-10
M 326-08 (2012)
M 330-13
R 63-13
Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Than 2 ft of Cover Subjected to Highway Loadings ............................................................................. M 273-1
Precast Reinforced Concrete Box Sections for Culve1ts, Storm Drains, and Sewers with Less Than 0.6 m of Cover Subjected to Highway Loadings [Metric]. .......................................................... M 273M-l
Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe ........................................................................................... M 274-1
Class PS46 Poly(Vinyl Chloride) (PVC) Pipe ................................... M 278-1
Aluminum-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe ........................................................................................... M 289-1
Corrugated Polyethylene Pipe, 300- to 1500-mm (12- to 60-in.) Diameter ............................................................................................ M 294-1
Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter ............................ M 304-1
Drainage, Sewer, Utility, and Related Castings ................................. M 306"1
Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter ........................................................ M 326-1
Polypropylene Pipe, 300" to 1500-mm (12- to 60"in.) Diameter ....... M 330"1
Solid Wall High-Density Polyethelene (HDPE) Conduit for Non-Pressure Applications Used for the Protection of Power and Teleconnnunications Cables .............................................................. R 63-1
CONCRETE, CURING MATERIALS, AND ADMIXTURES
IA
IA
IA
IA
lB
lB
lB
lB
lB
lB
lB
M 154MIM 154-12 Air-Entraining Admixtures for Concrete ........................................... M 154-1 IA
xiii
Number Title Page Volume
M 157-13 Ready-Mixed Concrete ...................................................................... M 157-1 lA
M 182-05 (2012) Burlap Cloth Made from Jute or Kenafand Cotton Mats .................. M 182-1 lA
M 194M/M 194-13 Chemical Admixtures for Concrete ................................................... M 194M/ lA M 194-1
M 205M/M 205-11 Molds for Forming Concrete Test Cylinders Vertically .................... M 205M/ lA M205-l
M 210M/M 210-14 Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete ............................. M 21 OM/ lA
M 210-1
M 224-91 (2014) Use of Protective Sealers for Portland Cement Concrete ................... M 224-1 lA
M 233-86 (2014) Boiled Linseed Oil Mixture for Treatment of Portland Cement Concrete ................................................................................ M 233-1 lA
M 241M/M 241-13 Concrete Made by Volumetric Batching and Continuous Mixing ..... M 241M/ lA M 241-1
M 295-11 Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete ............................................................................ M 295-1 1B
M 302-13 Slag Cement for Use in Concrete and Mortars .................................. M 302-1 lB
R 39-07 (2012) Making and Curing Con.crete Test Specimens in the Laboratory ...... R 39-1 1B
R 60-12 Sampling Freshly Mixed Concrete .................................................... R 60-1 1B
R 64-14 Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar ................................................. R 64-1 1B
ENVIRONMENTAL TESTS
R 23-99 (2013)
R 24-99 (2013)
Chemical, Biological, and Physical Analysis of Water ..................... R 23-1
Collection aud Preservation of Water Samples .................................. R 24-1
GUARDRAIL AND FENCING
1B
1B
M 180-12 Corrugated Sheet Steel Beams for Highway Guardrail ..................... M 180-1 lA
M 181-10 Chain-Link Fence .............................................................................. M 181-1 lA
M 269-96 (2013) Turnbuckles and Shackles .................................................................. M 269-1 lA
M 279-14 Metallic-Coated, Steel Woven Wire Fence Fabric ............................. M 279-1 lA
M 280-14 Metallic-Coated (Carbon) Steel Barbed Wire .................................... M 280-1 1B
M 281-96 (2013). Ste.el Fence Posts and Assemblies, Hot-Wrought.. ......... .- ................. M 281-1 1B
HYDRAULIC CEMENT
M 85-12 Portland Cement ................................................................................ M 85-1 lA
M 240M/M 240-14 Blended Hydraulic Cement ................................................. , .............. M 240M/ lA M240-l
M 307-13 Silica Furne Used in Cementitious Mixtures ..................................... M 307-l 1B
xiv
Number
M 321-04 (2012)
Title Page
High-Reactivity Pozzolans for Use in Hydraulic-Cement Concrete, Mortar, and Grout .............................................................. M 321-1
JOINT FILLER AND ASPHALT PLANK
M 33-99 (2012)
M 153-06 (2011)
M 213-01 (2010)
M 251-06 (2011)
M 297-10
R 50-09 (2013)
Preformed Expansion Joint Filler for Concrete (Bituminous Type) ............................................................................. M 33-1
Preformed Sponge Rubber and Cork Expansion Joint Fillers for Concrete Paving and Structural Construction ........................ ,. ..... M 153-1
Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) ............................................................................. M 213-1
Plain and Laminated Elastomeric Bridge Bearings ............................ M 251-1
Preformed Polychloroprene Elastomedc Joint Seals for Bridges ...... M 297-1
Geosynthetic Reinforcement of the Aggregate Base Course of Flexible Pavement Structures ............................................................ R 50-1
METALLIC MATERIALS FOR BRIDGES
M 102M/M 102-06 (2011)
M 103M/M 103-12
M 105-09 (20I3)
M lllM/M 111-14
M 163M/M 163-07 (2012)
M 169-09
M202M/ M 202-08 (2012)
M227M/M227-13
M 232M/M 232-10
M255M/ M 255-05 (2013)
M 270M/M 270-12
M 277-06 (20IO)
Steel Forgings, Carbon and Alloy, for General Industrial Use .......... M 102M/ M I02-l
Steel Castings, Carbon, for General Application ............................... M 103M/ M 103-1
Gray Iron Castings ............................................................................. M I 05-1
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products ...... M l l!M/ M 111-1
Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application ..................................................... M 163M/
M 163-1
Steel Bars, Carbon and Alloy, Cold-Finished .................................... M 169-1
Steel Sheet Piling .. .. .. .... ... .... .. .. .. .. .. .. .. .. .......... ... .. .... .. ........ ................. M 202M/ M202-l
Steel Bars, Carbon, Merchant Quality, Mechanical Properties .......... M 227/ M227M-l
Zinc Coating (Hot-Dip) on Iron and Steel Hardware ......................... M 232M/ M 232-I
Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties ........................................................................ M 255M/
M255-I
Structural Steel for Bridges ................................................................ M 270M/ M270-l
Wire Rope and Sockets for Movable Bridges .................................... M 277-I
xv
Volume
lB
IA
IA
IA
IA
lB
lB
IA
IA
IA
IA
IA
IA
IA
IA
IA
IA
IA
IA
Number Title Page Volume
M 285M/M 285-11 Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service .............................................................................. M 285M/ lB
M285-l
M 292M/M 292-14 Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both ............................................... M 292M/ 1B
M292-1
M314-90(2013) SteelAnchorBolts ............................................................................. M314-1 1B
R 53-10 Discontinued-Qualification of Deformed and Plain Reinforcing Steel Bar, Welded Wire, and Wire Producing Mills .......................... R53-1 1B
MISCELLANEOUS
M 143-14 Sodium Chloride ................................................................................ M 143-1 lA
M 144-14 Calcium Chloride ............................................................................... M 144-1 lA
M 230-07 (2012) Expanded and Extruded Foam Board (Polystyrene) .......................... M 230-1 lA
M 235M/M 235-13 Epoxy Resin Adhesives ..................................................................... M 235M/ lA M235-l
R 8-96 (2009) Evaluation of Transportation-Related Earthbome Vibrations ............ R 8-1 1B
R 10-06 (2011) Definition of Terms Related to Quality and Statistics as Used in Highway Construction .......................................................... R 10-1 1B
R 16-04 (2009) Regulatory Information for Chemicals Used in AASHTO Tests ....... R 16-1 1B
R 25-00 (2013) Technician Training and Qualification Programs .............................. R 25-1 1B
R 34-03 (2013) Evaluating Deicing Chemicals ........................................................... R 34-1 1B
R44-07 (2012) Independent Assurance (IA) Programs .............................................. R 44-1 1B
PAINTING AND TRAFFIC MARKING AND SIGNING
M 237-96 (2014)
M247-13
M 248-91 (2012)
M249-12
M 268-14
M 290-96 (2013)
M 300-03 (2012)
R 31-09 (2014)
Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete......................... M 23 7-1
Glass Beads Used in Pavement Markings .......................................... M 247-1
Ready-Mixed White and Yellow Traffic Paints ................................. M 248-1
White and Yellow Reflective Thermoplastic Striping Material (Solid Fonn) ........................................................................ M 249-1
Retroreflective Sheeting for Flat and Vertical Traffic Control Applications ....................................................................................... M 268-1
Acrylic Prismatic Reflectors and Embossed Aluminum Frames for Signs ................................................................................ M 290-1
Inorganic Zinc-Rich Primer ............................................................... M 300-1
Evaluation of Protective Coating Systems for Strnctural Steel... ....... R 31-1
PAVEMENT SURFACE CHARACTERISTICS
M 328-14 Inertial Profiler ................................................................................... M 328-1
xvi
lA
lA
IA
lA
lA
1B
1B
1B
1B
Number
M331-13
R 36-13
R 37-04 (2013)
R40-10 (2013)
R 41-05 (2010)
R43-13
R48-IO (2013)
R54-14
R55-10 (2013)
R 56-14
R 57-14
Title Page
Smoothness of Pavement in Weigh-in-Motion (WIM) Systems ........ M 331-1
Evaluating Faulting of Concrete Pavements ...................................... R 36-1
Application of Gronnd Penetrating Radar (GPR) to Highways ......... R 37-1
Measuring Pavement Profile Using a Rod and Level ........................ R 40-1
Measuring Pavement Profile Using a Dipstick® ................................ R 41-1
Quantifying Roughness of Pavements ............................................... R 43-1
Determining Rut Depth in Pavements ................................................ R 48-1
Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems ............................................................................... R 54-1
Quantifying Cracks in Asphalt Pavement Surfaces ........................... R 55-1
Certification oflnertial Profiling Systems ......................................... R 56-1
Operating Inertial Profiling Systems .................................................. R 57-1
QUALITY ASSURANCE
R 9-05 (2013)
Rl8-IO
R 20,99 (2012)
R 38-10 (2013)
R 42-06 (2011)
R 61-12
R 65-14
Acceptance Sampling Plans for Highway Construction .................... R 9-1
Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories ................... R 18-1
Procedures for Measuring Highway Noise ........................................ R 20-1
Quality Assurance of Standard Manufactured Materials ................... R 38-1
Developing a Quality Assurance Plan for Hot Mix Asphalt (I-IMA) .................................................................................. R 42-1
Establishing Requirements for Equipment Calibrations, Standardizations, and Checks ............................................................ R 61-1
Evaluating the Engineering and Environmental Suitablility of Recycled Materials ............................................................................ R 65-1
REINFORCING STEEL AND WIRE ROPE
M 30-14 Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail ............................................................................ M 30-1
M31M/M31-14 Deformed and Plain Carbon-Steel Bars for
Volume
1B
1B
1B
1B
1B
1B
1B
1B
lB
lB
lB
lB
lB
1B
lB
lB
lB
lB
lA
Concrete Reinforcement .................................................................... M 3 IM/ lA
M 32M/M 32-09 (2013)
M 54M/M 54-07 (2012)
M 55M/M 55-09 (2013)
M 203M/M 203-12
M31-1
Steel Wire, Plain, for Concrete Reinforcement.. ................................ M 32M/ M32-I
Welded Defmmed Steel Bar Mats for Concrete Reinforcement.. ...... M 54M/ M54-I
Steel Welded Wire Reinforcement, Plain, for Concrete .................... M 55M/ M55-l
Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement ..... M 203M/ M 203-1
xvii
lA
lA
IA
IA
Number Title Page
M 204M/M 204-14 Uncoated Stress-Relieved Steel Wire for Prestressed Concrete ........ M 204M/ M204-1
M 221M/M 221-09 (2013)
M 225M/M 225-09 (2013)
M 254-06 (2010)
M 275M/M 275-08 (2012)
M 322M/M 322-10
Steel Welded Wire Reinforcement, Deformed, for Concrete ............ M 221M/ M 221-1
Steel Wire, Deformed, for Concrete Reinforcement .......................... M 225M/ M225-l
Corrosion-Resistant Coated Dowel Bars ........................................... M 254-1
Uncoated High-Strength Steel Bars for Prestressing Concrete .......... M 275M/ M 275-1
Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement .................................................................... M 322M/
M322-l
M 329M/M 329-11 Stainless Clad Deformed and Plain Round Steel Bars for
Volume
IA
lA
!A
!A
1B
1B
Concrete Reinforcement .................................................................... M 329M/ 1B M 329-1
SOILS AND STABILIZATION
M 57-80 (2012)
M 145-91 (2012)
M 146-91 (2012)
M 147-65 (2012)
M 216-13
M 288-06 (2011)
M 318-02 (2010)
M 319-02 (2010)
R 13-12
R 21-96 (2009)
R 22-97 (2010)
R27-0l (2010)
R 51-13
R 52-10
R 58-11
Materials for Embankments and Subgrades ....................................... M 57-1
Classification of Soils and Soil-Aggregate Mixtnres for Highway Construction Purposes .................................................. M 145-1
Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials ...... M 146-1
Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses ........................................................................... M 147-1
Lime for SofrStabilization ................................................................. M 216-1
Geotextile Specification for Highway Applications .......................... M 288-1
Glass Cullet Use for Soil-Aggregate Base Course ............................. M 318-1
Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course .............................................................................. M 319-1
Conducting Geotechnical Subsurface Investigations ......................... Rl3-l
Drilling for Subsmface Investigations-Unexpectedly Encountering Suspected Hazardous Material . . . . . . .. . . . . . . . . ..... .. . . . . . .. .. . . .. R 21-1
Decommissioning Geotechnical Exploratory Boreholes ................... R 22-1
Assessment of Corrosion of Steel Piling for Non-Marine Applications ....................................................................................... R 27-1
Compost for Erosion/Sediment Control (Filter Berms and Filter Socks) ....................................................................................... R 51-1
Compost for Erosion/Sediment Control (Compost Blankets) ............ R 52-1
Dry Preparation ofDistnrbed Soil and Soil-Aggregate Samples for Test ............................................................................................... R 58-1
xviii
lA
lA
IA
lA
!A
1B
1B
1B
1B
1B
1B
1B
1B
1B
1B
Number Title Page
TESTING EQUIPMENT
M 92-10
M 152M/M 152-11
M 201-11
M 231-95 (2010)
M 261-96 (2013)
M 286-96 (2013)
R 32-11
R 33-11
R45-13
Wire-Cloth Sieves for Testing Purposes ............................................ M 92-1
Flow Table for Use in Tests of Hydraulic Cement ............................ M 152M/
Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic
M 152-1
Cements and Concretes ...................................................................... M 201-1
Weighing Devices Used in the Testing ofMaterials .......................... M 231-1
Rib-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests ................................................................... M 261-1
Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests ................................................................... M 286-1
Calibrating the Load Cell and Deflection Sensors for a Falling Weight Deflectometer ........................................................................ R 32-1
Calibrating the Reference Load Cell Used for Reference Calibrations for a Falling Weight Deflectometer. .............................. R 33-1
Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer .................................................................... R 45-1
TIMBER AND PRESERVATIVES
M 133-12 Preservatives and Pressure Treatment Processes for Timber ............. M 133-1
M 168-07 (2012) Wood Products................................................................................... M 168-1
DELETED SPECIFICATIONS
The following specifications have been deleted from the 34'" Edition:
Epoxy Protective Coatings
Prefom1ed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Volume
lA
lA
lA
lA
lA
1B
1B
1B
1B
IA
IA
M 200-73 (2012)
M 220-84 (2012)
M 282-99 (2012)
M324-12
Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements
Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
xix
PART 1-STANDARD SPECIFICATIONS AND STANDARD PRACTICES
Number
M6-13
M 17-11
M 29-12
M 30-14
M 31M/M 31-14
M 32M/M 32-09 (2013)
M 33-99 (2012)
M 36-14
M 43-05 (2013)
M 45-06 (20IO)
M 54M/M 54-07 (2012)
M 55M/M 55-09 (2013)
M 57-80 (2012)
M 80-13
M 81-92 (2012)
M 82-75 (2012)
M 85-12
M 86M/M 86-09 (2013)
M 92-10
M 102M/M 102-06 (2011)
M 103M/M 103-12
M 105-09 (2013)
M lllM/M 111-14.
Table of Contents
NUMERICAL SEQUENCE
Title Page
Fine Aggregate for Hydraulic Cement Concrete .......... , .................. M 6-1
Mineral Filler for Bituminous Paving Mixtures .............................. M 17-1
Fine Aggregate for Bituminous Paving Mixtures . . . . .. . . . .. . . . . .. .. .. .. .... M 29-1
Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail. ......................................................................... M 30-1
Deformed and Plain Carbon-Steel Bars for
Volume
lA
IA
IA
lA
Concrete Reinforcement ................................................................. M 3 IM/ lA M 31-1
Steel Wire, Plain, for Concrete Reinforcement ............................... M 32M/ M 32-1
Preformed Expansion Joint Filler for Concrete (BitmninousType) .......................................................................... M33-l
Cmrugated Steel Pipe, Metallic-Coated, for Sewers and Drains .. .. M 3 6-1
Sizes of Aggregate for Road and Bridge Construction ................... M 43-1
Aggregate for Masomy Mortar ....................................................... M 45-1
Welded Deformed Steel Bar Mats for Concrete Reinforcement ..... M 54M/ M54-1
Steel Welded Wire Reinforcement, Plain, for Concrete ................. M 55M/ M55-l
Materials for Embankments and Subgrades .................................... M 57-1
Coarse Aggregate for Hydraulic Cement Concrete ......................... M 80-1
Cutback Asphalt (Rapid-Curing Type) ........................................... M 81-1
Cutback Asphalt (Medium-Curing Type) ....................................... M 82-1
Portland Cement. ............................................................................. M 85-1
Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe ..... M 86M/ M86-I
Wire-Cloth Sieves for Testing Purposes ......................................... M 92-I
Steel Forgings, Carbon and Alloy, for General Industrial Use ....... M 102M/ M 102-1
Steel Castings, Carbon, for General Application ............................ M 103M/ M 103-1
Gray Iron Castings .......................................................................... M 105-1
Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products ................................................................................. M 11 IM/
M 111-1
xxi
IA
IA
lA
IA
IA
IA
lA
IA
IA
lA
IA
lA
lA
lA
IA
IA
IA
IA
Number
M 133-12
M 140-13
M 143-14
M 144-14
M 145-91 (2012)
M 146-91 (2012)
M 147-65 (2012)
M 152M/M 152-11
M 153-06 (2011)
M 154M/M 154-12
M 156-13
M 157-13
M 163M/M 163-07 (2012)
M 167M/M 167-14
M 168-07 (2012)
M 169-09
· M 170-14
M 170M-14
M 175M/M 175-05 (2013)
M 176M/M 176-07 (2012)
M l 78M/M 178-07 (2012)
M 180-12
M 181-10
M 182-05 (2012)
M 190-04 (2012)
Title Page
Preservatives and Pressure Treatment Processes for Timber .......... M 133-1
Emulsified Asphalt .......................................................................... M 140-1
Sodium Chloride ............................................................................. M 143-1
Calcium Chloride ............................................................................ M 144-1
Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes ..................................................... M 145-1
Terms Relating to Subgrade, Soil-Aggregate, and Fill Materials ... M 146-1
Materials for Aggregate and Soil-Aggregate Subbase, Base, and Surface Courses ........................................................................ M 147-1
Flow Table for Use in Tests of Hydraulic Cement ......................... M 152M/ M 152-1
Preformed Sponge Rubber and Cork Expausion Joint Fillers for Concrete Paving and Structural Construction ................ M 153-1
Air-Entraining Admixtures for Concrete .................... , .................... M 154M/ M 154-1
Requirements for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures ........................................... M 156-1
Ready-Mixed Concrete ................................................................... M 157-1
Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application ................................. M 163M/
M 163-1
Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches ............................. M 167M/
M 167-1
Wood Products ................................................................................ M 168-1
Steel Bars, Carbon and Alloy, Cold-Finished ................................. M 169-1
Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe .......... M 170-1
Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] ................................................................................... Ml 70M-l
Perforated Concrete Pipe ................................................................ M 1 T5MI M 175-1
Porous Concrete Pipe ...................................................................... M 176M/ Ml76-l
Concrete Drain Tile ......................................................................... M 178M/ M 178-1
Corrugated Sheet Steel Beams for Highway Guardrail................... M 180-1
Chain-Link Fence ............................................................................ M 181-1
Burlap Cloth Made from Jute orKenaf and Cotton Mats ............... M 182-1
· Bituminous-Coated Corrugated Metal Culvert Pipe and Pipe-Arches .............................................................................. M 190-1
xxii
Volume
!A
lA
!A
!A
JA
!A
lA
lA
lA
!A
!A
!A
JA
!A
lA
IA
!A
!A
IA
IA
!A
!A
JA
!A
!A
Number
M !94M/M 194-13
M 195-11
M 196-92 (2012)
M 197-06 (2011)
M 199MIM 199-14
M 201-11
M 202M/M 202-08 (2012)
M 203M/M 203-12
M 204M/M 204-14
M 205MIM 205-11
M 206M/M 206-14
M 207M/M 207-14
M 208-01 (2013)
M210M/M210-14
M 213-01 (2010)
M 216-13
M 218-03 (2011)
M 219-92 (;1012)
M 221MIM 221-09 (2013)
M 224-91 (2014)
M 225M/M 225-09 (2013)
M 226-80 (2012)
Title
Chemical Admixtures for Concrete .............................................. ..
Lightweight Aggregates for Stmctural Concrete ........................... .
Cormgated Aluminum Pipe for Sewers and Drains ....................... .
Aluminum Alloy Sheet for Corrugated Aluminum Pipe ................ .
Precast Reinforced Concrete Manhole Sections ............................ .
Mixing Rooms, Mbist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic
Page
M 194M/ M 194-1
M 195-1
M 196-1
M 197-1
M 199M/ M 199-1
Cements and Concretes................................................................... M 201-1
Steel Sheet Piling............................................................................ M 202M/ M202-l
Steel Strand, Uncoated Seven-Wire for Concrete Reinforcement ................................................................. M 203M/
M203-l
Uncoated Stress-Relieved Steel Wire for Prestressed Concrete ...... M 204M/ M204-l
Molds for Fanning Concrete Test Cylinders Vertically ................. M 205M/ M205-1
Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe................................................................................ M 206M/
M206-l
Reinforced Concrete Elliptical Culvert, Stmm Drain, and Sewer Pipe................................................................................ M 207M/
M 207-1
Cationic Emulsified Asphalt........................................................... M 208-1
Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mmtar, and Concrete .......................... M 210M/
M 210-1
Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types) ......................................................................... . M 213-1
Lime for Soil Stabilization ............................................................. . M 216-1
Steel Sheet, Zinc-Coated (Galvanized), for Conugated Steel Pipe ....................................................................................... . M 218-1
Cormgated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches ....................................................... . M 219-1
Steel Welded Wire Reinforcement, Deformed, for Concrete ......... . M221M/ M 221-1
Use of Protective Sealers for Portland Cement Concrete ............... . M224-l
Steel Wire, Defo1med, for Concrete Reinforcement ...................... . M225M/ M225-I
Viscosity-Graded Asphalt Cement. ................................................ . M226-l
xxiii
Volume
IA
lA
IA
IA
IA
IA
lA
IA
IA
IA
IA
lA
IA
IA
.IA
IA
IA
IA
IA
IA
IA
IA
Number
M 227M/M 227-13
M 230-07 (2012)
M 231-95 (2010)
M 232M/M 232-10
M 233-86 (2014)
M235M/M235-13
M 237-96 (2014)
M 240M/M 240-14
M 241M/M 241-13
M242M/M242-14
M 243-96 (2012)
M 245-00 (2012)
M 246-05 (2011)
M247-13
M 248-91 (2012)
M249-12
M 251-06 (2011)
M 252'09 (2012)
M 254-06 (2010)
M255M/ M 255-05 (2013)
M 259-11
M259M-11
M 261-96 (2013)
Title Page Volume
Steel Bars, Carbon, Merchant Quality, Mechanical Properties ...... . M227M/ lA M 227-1
Expanded and Extrnded Foam Board (Polystyrene) ...................... . M 230-1 IA
Weighing Devices Used in the Testing of Materials ...................... . M231-l lA
Zinc Coating (Hot-Dip) on Iron and Steel Hardware .................... .. M232M/ IA M 232-1
Boiled Linseed Oil Mixture for Treatment of Portland Cement Concrete ............................................................................. M 233-1 lA
Epoxy Resin Adhesives .................................................................. M 235M/ M 235-1
Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened Portland Cement and Asphalt Concrete .......................... M 237-1
Blended Hydraulic Cement.. ........................................................... M 240M/ M 240-1
Concrete Made by Volumetric Batching and Continuous Mixing ......................................................................... M 24 lM/
M 241-1
Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe ................................................................................ M 242M
M242-l
Field-Applied Coating of C01rugated Metal Structural Plate for Pipe, Pipe-Arches, and Arches ........................................................ M 243-1
Corrugated Steel Pipe, Polymer-Precoated, for Sewers and Drains ........................................................................... M 245-1
Steel Sheet, Metallic-Coated and Polymer-Precoated, for Conugated Steel Pipe ................................................................ M 246-1
Glass Beads Used in Pavement Markings ....................................... M 247-1
Ready-Mixed White and Yell ow Traffic Paints.............................. M 248-1
White and Yellow Reflective Thermoplastic Striping Material (Solid F01m) ............................................ ......................... M 249-1
Plain and Laminated Elastomeric Bridge Bearings ......................... M 251-1
Corrugated Polyethylene Drainage Pipe ......................................... M 252-1
Corrosion-Resistant Coated Dowel Bars ........................................ M 254-1
Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties ..................................................................... M 255M/
M 255-1
Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers ............................................................... M 259-1
Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers [Metric] ................................................. M 259M-l
Rib-Tread Standard Tire for Special-Purpose Pavement Frictional-Property Tests ................................................................. M 261-1
xx iv
lA
IA
IA
IA
lA
IA
IA
lA
IA
IA
IA
lA
lA
lA
lA
lA
IA
lA
Number
M262-ll
M 268-14
M 269-96 (2013)
M 270M/M 270-12
M273-11
M 273M-11
M 274-87 (2012)
M 275M/M 275-08 (2012)
M 277-06 (2010)
M 278-14
M 279-14
M 280-14
M 281-96 (2013)
M 285M/M 285-11
M 286-96 (2013)
M 288-06 (2011)
M 289-91 (2012)
M 290-96 (2013)
M292M/M292-14
M 294-13
M295-11
M 297-10
M 300-03 (2012)
M 302-13
Title
Concrete Pipe and Related Products .............................................. .
Retroreflective Sheeting for Flat and Vertical Traffic Control
Applications ........................... ··'······················································
Tnrnbuckles and Shacldes .............................................................. .
Stmctnral Steel for Bridges ............................................................ .
Precast Reinforced Concrete Box Sections for Culve1ts, Storm Drains, and Sewers with Less Than 2 ft of Cover
Page
M262-l
M268-1
M269-l
M270M/ M 270-1
Subjected to Highway Loadings ..................................................... M 273-1
Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers with Less Thau 0.6 m of Cover Subjected to Highway Loadings [Metric]....................................... M 273M-1
Steel Sheet, Aluminum-Coated (Type 2), for Corrugated Steel Pipe ........................................................................................ M 274-1
Uncoated High-Strength Steel Bars for Prestressing Concrete ....... M 275M/ M 275-1
Wire Rope and Sockets for Movable Bridges ................................. M277-l
Class PS46 Poly(Vinyl Chloride) (PVC) Pipe ................................ M 278-1
Metallic-Coated, Steel Woven Wire Fence Fabric .......................... M 279-1
Metallic-Coated (Carbon) Steel Barbed Wire ................................. M 280-1
Steel Fence Posts and Assemblies, Hot-Wrought........................... M 281-1
Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service................................................................................. M 285M/
M285-l
Smooth-Tread Standard Tire for Special-Purpose Pavement Frictional-Propeity Tests ................................................................. M 286-1
Geotextile Specification for Highway Applications ....................... M 288-1
Aluminnrn-Zinc Alloy Coated Sheet Steel for Corrugated Steel Pipe ................................................................ .................... .... M 289-1
Acrylic Prismatic Reflectors and Embossed Aluminum Frames for Signs............................................................................. M 290-1
Carbon and Alloy Steel Nuts for Bolts for High-Pressure or High-Temperature Service, or Both ................................................ M 292M/
M 292-1
C01rugated Polyethylene Pipe, 300-to 1500-mm (12- to 60-in.) Diameter .......................................................................................... M 294-1
Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete......................................................................... M 295-1
Preformed Polychloroprene Elastomeric Joint Seals for Bridges ... M 297-1
Inorganic Zinc-Rich Primer ............................................................ M 300-1
Slag Cement for Use in Concrete and Mortars ............................... M 302-1
xxv
Volume
lA
lA
lA
lA
lA
lA
lA
lA
lA
lA
lA
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
Number
M 303-89 (2014)
M 304-11
M 306-10
M 307-13
M 314-90 (2013)
M 316-13
M 318-02 (2010)
M 319-02 (2010)
M 320-10
M 321-04 (2012)
M 322MiM 322-10
M 323-13
M 325-08 (2012)
M 326-08 (2012)
M 327-11
M 328-14
M 329M/M 329-11
M 330-13
M 331-13
~332-14
R 5-13
R 8-96 (2009)
R 9-05 (2013)
R 10-06 (2011)
R 13-12
R 15-00 (2012)
R 16-04 (2009)
Title Page
Lime for Asphalt Mixtures .............................................................. M 303-1
Poly(Vinyl Chloride) (PVC) Profile Wall Drain Pipe and Fittings Based on Controlled Inside Diameter ................................ M 304-1
Drainage, Sewer, Utility, and Related Castings.............................. M 306-1
Silica Fume Used in Cementitious Mixtures ................................... M 307-1
Steel Anchor Bolts.......................................................................... M 314-1
Polymer-Modified Cationic Emulsified Asphalt... .......................... M 316-1
Glass Cullet Use for Soil-Aggregate Base Course .......................... M 318-1
Reclaimed Concrete Aggregate for Unbound Soil-Aggregate Base Course ........................................................... M 319-1
Perf01mance-Graded Asphalt Binder.............................................. M 320-1
High-Reactivity Pozzolans for Use in Hydraulic-Cement Concrete, Mortar, and Grout.. ......................................................... M 321-1
Rail-Steel and Axle-Steel Deformed Bars for
Volume
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
Concrete Reinforcement ................................................................. M 322M/ lB M322-l
Superpave Volumetric Mix Design ................................................. M 323-1 lB
Stone Mallix Asphalt (SMA) .......................................................... M 325-1 lB
Polyethylene (PE) Liner Pipe, 300- to 1600-mm Diameter, Based on Controlled Outside Diameter........................................... M 326-1 lB
Processing Additions for Use in the Manufacture of Hydraulic Cements .......................................................................... M 327-1 lB
Ine1tial Profiler................................................................................ M 328-1 lB
Stainless Clad Deformed and Plain Round Steel Bars for Concrete Reinforcement ................................................................. M 329M/ lB
M329-1
Polypropylene Pipe, 300-to 1500-mm (12- to 60-in.) Diameter.......................................................................................... M 330-1
Smoothness of Pavement in Weigh-in-Motion (WIM) Systems ............................... : ........................................................... M331-1
Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test........................................................ M 332-1
Selection and Use of Emulsified Asphalts...................................... R 5-1
Evaluation of Transportation-Related Earthborne Vibrations ......... R 8-1
Acceptance Sampling Plans for Highway Construction .............. ... R 9-1
Definition of Terms ReJated to Quality and Statistics as Used in Highway Construction ................................... R 10-1
Conducting Geotechnical Subsurface Investigations...................... R 13-1
Asphalt Additives and Modifiers .................................................... R 15-1
Regulatory Information for Chemicals Used in AASHTO Tests .... R 16-1
xx vi
lB
1B
lB
lB
lB
lB
lB
lB
lB
lB
Number
R 18-10
R 20-99 (2012)
R 21-96 (2009)
R 22-97 (2010)
R 23-99 (2013)
R 24-99 (2013)
R 25-00 (2013)
R 26-01 (2013)
R 27-01 (2010)
R 28-12
R 29-14
R 30-02 (2010)
R31-09 (2014)
R 32-11
R 33-11
R 34-03 (2013)
R 35-14
R 36-13
R 37-04 (2013)
R 38-10 (2013)
R 39-07 (2012)
R40-_10 (2013)
R 41-05 (2010)
R 42-06 (2011)
R43-13
R 44-07 (2012)
R45-13
R 46-08 (2012)
R47-14
R 48-10 (2013)
Title Page
Establishing and Implementing a Quality Management System for Constrnction Materials Testing Laboratories ................ R 18-1
Procedures for Measuring Highway Noise ..... .. . . . . . ... ........... ... .. . . .. .. R 20-1
Drilling for Subsurface Investigations-Unexpectedly Encountering Suspected Hazardous Material . .. ... . .. . . .. ... . . . . . . ... .. . . .... R 21-1
Decommissioning Geotechnical Exploratory Boreholes ................ R 22-1
Chemical, Biological, and Physical Analysis of Water ................... R 23-1
Collection and Preservation of Water Samples ............................... R 24-1
Technician Training and Qualification Programs........................... R 25-1
Certifying Suppliers of Performance-Graded Asphalt Binders ....... R 26-1
Assessment of Corrosion of Steel Piling for Non-Marine Applications ............................................................... R27-l
Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PA VJ . . . .. . . .......... ............ .. . . . ...... .. . . . . .. .. .. .. .. . . . . ........ ... R 28-1
Grading or Verifying the Performance Grade (PG) of an Asphalt Binder....................................................................... R 29-1
Mixture Conditioning of Hot Mix Asphalt (H!VlA).. ....................... R 30-1
Evaluation of Protective Coating Systems for Strnctural Steel....... R 31-1
Calibrating 1he Load Cell and Deflection Sensors for a Falling Weight Deflectometer ................................... R 32-1
Calibrating the Reference Load Cell Used for Reference Calibrations for a Falling Weight Deflectometer ............................ R 33-1
Evaluating Deicing Chemicals........................................................ R 34-1
Superpave Volumetric Design for Asphalt Mixtures...................... R 35-1
Evaluating Faulting of Concrete Pavements................................... R 36-1
Application of Ground Penetrating Radar (GPR) to Highways...... R 37-1
Quality Assurance of Standard Manufactured Materials .. .... ...... .... R 3 8-1
Making and Curing Concrete Test Specimens in the Laboratory... R 39-1
Measuring Pavement Profile Using a Rod and Level ..................... R 40-1
Measuring Pavement Profile Using a Dipstick............................... R 41-1
Developing a Quality Assurance Plan for Hot Mix Asphalt (HMA) ............................................................................... R 42-1
Quantifying Roughness of Pavements .. . . .. .. .... .. .. . .. . .. .................. .... R 4 3-1
Independent Assurance (IA) Programs .. ... . . .. . . .. ........ .... .. .. .... .... .. .. .. R 44-1
Installing, Monitoring, and Processing Data of the Traveling Type Slope Inclinometer ................................................................. R45-l
Designing Stone Matrix Asphalt (SMA)......................................... R 46-1
Reducing Samples ofHotMixAsphalt (HMA) to Testing Size ..... R47-l
Detennining Rut Depth in Pavements............................................. R 48-1
xx vii
Volume
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
Number
R 49-09 (2013)
R 50-09 (2013)
R 51-13
R 52-10
R 53-10
R54-14
R 55-10 (2013)
R 56-14
R 57-14
R 58-11
R 59-11
R 60-12
R61-12
R 62-13
R 63-13
R 64-14
R 65-14
Title
Dete1mination ofLow-Temperatnre Performance Grade (PG) of Asphalt Binders ......................................................................... .
Geosynthetic Reinforcement of the Aggregate Base Course of Flexible Pavement Structures ......................................................... .
Compost for Erosion/Sediment Control (Filter Benns and Filter Socks) .................................................................................. ..
Compost for Erosion/Sediment Control (Compost Blankets) ........ .
Discontinued-Qualification of Deformed and Plain Reinforcing Steel Bar, Welded Wire, and Wire Producing Mills ...
Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems ............................................................... .
Quantifying Cracks in Asphalt Pavement Surfaces ...................... ..
Certification oflnertial Profiling Systems .................................... ..
Operating Inertial Profiling Systems .............................................. .
Dry Preparation ofDistnrbed Soil and Soil-Aggregate Samples for Test ................................................... .
Recovery of Asphalt Binder from Solution by Abson Method ...... .
Sampling Freshly Mixed Concrete ................................................ ..
Establishing Requirements for Equipment Calibrations, Standardizations, and Checks ........................................................ .
Developing Dynamic Modulus Master Curves for Asphalt Mixtures ............................................................................ .
Solid Wall High-Density Polyethylene (HDPE) Conduit for Non-Pressure Applications Used for the Protection of Power
Page
R49-l
R50-l
R 51-1
R52-l
R53-l
R54-l
R55-l
R 56-1
R57-l
R58-l
R 59-1
R 60-1
R 61-1
R 62-1
and Communications Cables ........................................................... R 63-1
Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar.............................................. R 64-1
Evaluating the Engineering and Environmental Suitablility of Recycled Materials ............................................ : ............................. R 65-1
Volume
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
lB
DELETED SPECIFICATIONS
The following specifications have been deleted from the 34th Edition:
M 200-73 (2012)
M 220-84 (2012)
M 282-99 (2012)
M 324-12
Epoxy Protective Coatings
Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
Joint Sealants, Hot-Poured, Elastomeric-Type, for Portland Cement Concrete Pavements
Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
xx viii
As an aid to the user of this volume, the following tabulation shows equivalencies between AASHIO and ASTM specifications. Where an asterisk(*) follows the ASTM number, there is a chjference between the two specifications. These differences are explained in the endnote accompanying each individual specification.
AASHTO Specifications ASTM Equivalent AASHTO Specifications ASTM Equivalent
M 17-11 D 242/D 242M-09* M 199M/M 199-14 C 478M-l3 and C 478-13*
M29-12 D 1073-11 M 201-11 c 511-09
M 30-14 A 741-98 M 202M/M 202-08 (2012) A 328/A 328M-07 (2012)
M 31M/M 31-14 A 615/A 615M-09b* M 203M/M 203-12 A 416/A 416M-10
M 32M/M 32-09 (2013) A 82/A 82M-07 M 204M/M 204-14 A 421/A 421M-10
M 33-99 (2012) D 994-98 (2010) M 205M/M 205-11 C 470/C 470M-09*
M 36-14 A 760/A 760M-Ola M 206M/M 206-14 C 506M-l3a and C 506-13a
M 43-05 (2013) D 448-08 M 207M/M 207-14 C 507M-13a and C 507-13a*
M 45-06 (2010) c 144-04* M 208-01 (2013) D 2397-02
M 54M/M 54-07 (2012) A 184/A 184M-06" M210M/M210-14 C 490/C 490M-ll
M 55M/M 55-09 (2013) A 185/A 185M-07 M 213-01 (2010) D 1751-04 (2008)
M 85-12 C 150/C 150M-12 M216-13 c 977-10
M 86MIM 86-09 (2013) C 14M-07 and C 14-07* M 219-92 (2012) B 746/B 746M-92
M92-10 E 11-09 M 220-84 (2012) D 2628-91 (2011)
M 102MIM 102-06 (2011) A 668/A 668M-04 M 221M/M 221-09 (2013) A 497 I A 497M-07
. M 103M/M 103-12 A27/A27M-10 M 225M/M 225-09 (2013) A 496/A 496M-07
M lllM/M 111-14 A 123/A 123M-12 M 227MIM 227-13 A 663/A 663M-12
M 140-13 D 977-12* M 232M/M 232-10 A 153/A 153M-09*
M 152M/M 152-11 C 230/C 230M-08 M 235M/M 235-13 c 881-10*
M 153-06 (2011) D 1752-04a* M 240M/M 240-14 C 595/C 595M-14
M l54MIM 154-12 C 260/C 260M-10a* M 241M/M 241-13 C 685/C 685M-ll *
M 163M/M 163-07 (2012) A 743/A 743M-06* M242M/M242-14 C 655M-12 and C 655-12b
M 167M/M 167-14 A 761/A 761M-04 M 245-00 (2012) A 762/A 762M-98
M 169-09 A 108-07 M246-05 (2011) A 742/A 742M-03
M 170-14 C 76-13a* M 255M/M 255-05 (2013) A 675/A 675M-03"
M 170M-14 C 76M-13a* M259-ll C 789-95a*
M 175M/M 175-05 (2013) C 444M-03 and C 444-03 M259M-ll c 789M-98*
M 176M/M 176-07 (2012) C 654M-05a and M 261-96 (2013) E 501-08* C 654-05a*
M 178M/M 178-07 (2012) C 412M-05a and M262-ll C 822-08b* C412-05a*
M 194MIM 194-13 C 494/C 494M-ll * M 270MIM 270-12 A 709/A 709M-ll
M 195-11 c 330-09 M273-11 C 850-95a*
M 196-92 (2012) B 745/B 745M-95 M273M-ll C 850M-98*
M 197-06 (2011) B 744/B 744M-05* M 275M/M 275-08 (2012) A 722/A 722M-07
xx ix
AASHTO Specifications ASTM Equivalent AASHTO Specifications ASTM Equivalent
M 279-14 A 116-05 M 307-13 c 1240-11
M280-14 A 121-07 M 322M/M 322-10 A 996/ A 996M-09
M 281-96 (2013) A 702-89 (1994)d M 324-12 D 6690-07
M 285M/M 285-11 A 744/A 744M-10 M327-11 C465-10
M 286-96 (2013) E 524-08* R5-13 D 3628-08*
M 292M/M 292-14 A 194/A 194M-12a R 13-12 D 420-98 (2003)
M295-ll C 618-08a R39-07 (2012) C 192/C 192M-06
M 297-10 D 3542-08* R 59-11 D 1856-09*
M 302-13 c 989-12 R 60-12 c 172-10
xxx
ASTM Specifications AASHTO Equivalent ASTM Specifications AASHTO Equivalent
A 27/A 27M-10 M 103M/M 103-12 C 150/C 150M-12 M 85-12
A 82/A 82M-07 M 32MIM 32-09 (2013) c 172-10 R 60-12
A 108-07 M 169-09 C 192/C 192M-06 R 39-07 (2012)
A 116-05 M 279-14 C 230/C 230M-08 M 152MIM 152-11
A 121-07 M 280-14 C 260/C 260M-l Oa* M 154M/M 154-12
A 123/A 123M-12 M lllMIM 111-14 c 330-09 M 195-11
A 153/A 153M-09* M232M/M232-10 C 412M-05a and C 412-05a* M 178MIM 178-07 (2012)
A 184/A 184M-06" M 54M/M 54-07 (2012) C 444M-03 and C 444-03 M 175MIM 175-05 (2013)
A 185/A 185M-07 M 55MIM 55-09 (2013) c 465-10 M 327-11
A 194/A 194M-12a M 292MIM 292- I 3 C 470/C 470M-09* M 205MIM 205-1 I
A 328/A 328M-07 (2012) M 202M/M 202-08 (2012) C 478M-13 and C 478-13* M 199MIM 199-14
A416/A416M-10 M 203MIM203-12 C 490/C 490M-11 M 210M/M 210-14
A 421/A 421M-10 M 204MIM 204-14 C 494/C 494M-ll * M 194M/M 194-13
A 496/A 496M-07 M 225MIM 225-09 (2013) C 506M-13a and C 506-13a* M 206MIM 206-14
A 497/A 497M-07 M 221MIM 221-09 (2013) C 507M-13a and C 507-13a* M 207MIM 207-14
A 615/A 615M-09b* M31MIM31-14 c 511-09 M 201-11
A 663/ A 663M-12 M227MIM227-13 C 595/C 595M-I 4 M 240MIM 240- I 4
A 668/ A 668M-04 M I 02M/M 102-06 (2011) C 618-08a M295-ll
A 675/A 675M-03" M 255MIM 255-05 (2013) C 654M-05a and C 654-05a* M 176MIM 176-07 (2012)
A 702-89 (1994)" M 281-96 (2013) C 655M-12 and C 655-12b* M 242MIM 242- I 4
A 709/A 709M-11 M 270MIM 270-12 C 685/C 685M-ll * M 241MIM 241-13
A 722/A 722M-07 M 275M/M 275-08 (2012) C 789-95a* M259-ll
A 741-98 M 30-14 C 789M-98* M259M-ll
A 742/A 742M-03 M 246-05 (2011) c 822-08b* M262-11
A 743/A 743M-06* M l63M/M 163-07 (2012) C 850-95a* M273-ll
A 744/A 744M-10 M 285M/M 285-1 I C 850M-98* M273M-ll
A 760/A 760M-Ola M 36-14 c 881-10* M 235MIM 235-13
A 761/A 761M-04 M 167MIM 167-14 c 977-10 M 216-13
A 762/A 762M-98 M 245-00 (2012) c 989-12 M 302-13
A 996/ A 996M-09 M322M/M322-10 c 1240-11 M307-13
B 744/B 744M-05* M 197-06 (2011) D 242/D 242M-09* M 17-11
B 745/B 745M-95 M 196-92 (2012) D 420-98 (2003) R 13-12
B 746/B 746M-92 M 219-92 (2012) D 448-08 M 43-05 (2013)
C 14M-07 and C 14-07* M 86MIM 86-09 (2013) D 977-12* M 140-13
C 76-13a* M 170-14 D 994-98 (2010) M 33-99 (2012)
C 76M-13a* M 170M-14 D 1073-11 M29-12
c 144-04* M 45-06 (2010) D 1751-04 (2008) M 213-01 (2010)
xxxi
ASTM Specifications AASHTO Equivalent ASTM Specifications AASHTO Equivalent
D 1752-04a* M 153-06 (2011) D 3628-08* R5-13
D 1856-09* R 59-11 D 6690-07 M 324-12
D 2397-02 M 208-01 (2013) E 11-09 M 92-10
D 2628-91 (2011) M 220-84 (2012) E 501-08* M 261-96 (2013)
D 3542-08* M 297-10 E 524-08* M 286-96 (2013)
:xxxii
~:
Revisions for 34'" Edition of Standard Specifications for . Transportation Materials and Methods of Sampling and Testing-Part 1
The balloted technical changes listed below are also indicated in the specifications by a change bar in the left margin. Non-balloted editorial changes do not receive the change bar.
Designation Number
M 31M/M 31-14
M 36-14
M 55M/M 55-09 (2013)
Title
Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
Corrugated Steel Pipe, Metallic-Coated, for Sewers and Drains
Steel Welded Wire Reinforcement, Plain, for Concrete
Technical Section Number
4g
4b
4g
i,~]~,-~1\%_t!t;T,2.~-~~"1~~~-t~1:1;~:~;i~~--i)j;g}!f~lffi~~\::&:~~3~~~I7lI~;~;,:lbfil~~,1~~Zt:E~~Ai:~':1~1!'£~E;:;{B,::;J:~' ,,~-~ ,._, .. ~,~-'~1:~, M 105-09 (2013) Gray Iron Castings 4h
M 143-14 Sodium Chloride 4c
M 167M/M 167-14 Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted 4b Pipe, Pipe-Arches, and Arches
M 170M-14 Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe [Metric] 4a
M 199M/M 199-14 Precast Reinforced Concrete Manhole Sections 4a
2013 Ballot Revision
Revised extensively.
Revised extensively.
Reconfirmed in 2013.
Reconfirmed in 2013.
Revised Sections 5.2 and 6.3.1.
Revised extensively.
Revised extensively.
Revised Section 14.4.1.5.
~-
Designation Number Title
M 206M/M 206-14 Reinforced Concrete Arch Culvert, Stonn Drain, and Sewer Pipe
M 208-01 (2013) Cationic Emulsified Asphalt
Technical Section Number 2013 Ballot Revision
4a Revised Sections 6.2.4.7, 8.1.6.1, and 10.2.1.
2a Reconfinned in 2013.
M 221M/M 221-09 (2013) Steel Welded Wire Reinforcement, Defonned, for Concrete 4g Reconfinned in 2013.
M 237-96 (2014) Epoxy Resin Adhesives for Bonding Traffic Markers to Hardened 4c Reconfinned in 2014. Portland Cement and Asphalt Concrete
~i~~~{~~~1~~~~;:A~~i~~i&~3t~~iliis~(~~fgi~~~~~~j~~~I~~~~ M242M/M242-14 Reinforced Concrete D-Load Culvert, Stonn Drain, and Sewer Pipe 4a Revised Section 6.1.2.4 .
. , , -·-,··~··cr;-·.-··cc- ""'""' ·-·,..,---::;-
~
Designation Number Title
M 280-14 Metallic-Coated (Carbon) Steel Barbed Wire
M 292M/M 292-14 Carbon and Alloy Steel Nuts for Bolts for High-Pressure or HighTemperature Service, or Both
M 314-90 (2013) Steel Anchor Bolts
M 328-14 Inertial Profiler
R 9-05 (2013) Acceptance Sampling Plans for Highway Construction
R 26-01 (2013) Certifying Suppliers of Performance-Graded Asphalt Binders
R 31-09 (2014) Evaluation of Protective Coating Systems for Structural Steel
R 37-04 (2013) Application of Ground Penetrating Radar (GPR) to Highways
R 40-10 (2013) Measuring Pavement Profile Using a Rod and Level
R 48-10 (2013) Determining Rut Depth in Pavements
Technical Section Number 2013 Ballot Revision
4d Revised to maintain equivalency with ASTMA 121-13.
4f Revised extensively.
4f Reconfirmed in 2013.
Sa Revised extensively.
Sc Reconfirmed in 2013.
2b Reconfirmed in 2013.
4c Reconfirmed in 2014.
Sa Reconfrrmed in 2013.
Sa Reconfirmed in 2013.
5a Reconfirmed in 2013.
., '
§.
•
Designation Number Title
R 50-09 (2013) Geosynthetic Reinforcement of the Aggregate Base Course of Flexible Pavement Structures
R 54-14 Accepting Pavement Ride Quality When Measured Using Inertial Profiling Systems
R 56-14 Certification of Inertial Profiling Systems
R 64-14 Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Sbrink) or Mortar
The designation numbers of AASHTO materials standards are comprised of the following:
Technical Section Number 2013 Ballot Revision
4e Reconfirmed in 2013.
Sa Revised extensively.
Sa Revised extensively.
3b Adopted AASHTO Provisional standard TP 83 as a full standard.
• a letter that reflects the type of standard-M for standard specifications, R for standard practices, or T for standard methods of test;
the unique sequential number of the standard in its type;
• following a hyphen, the date of publication in its current form; and
• in some cases, the year of its last reconfirmation in parentheses.
For example, M 326-08 (2012) would be a standard specification, would carry the unique identifying number 326 in the list of specifications, was initially approved or last revised in 2008, and was reconfinmed without technical changes in 2012.
-'";-:·•=>·~-' 1 '