8/12/2019 American Chillers and Cooling Tower Systems.docx

1/2

American Chillers and Cooling Tower Systems, Inc. can provide your industrial process with a durable, lolasting, light weight Fiberglass (FRP) Cooling Tower System from 5 tons to 1500 tons capacity.

The FRP design is engineered to withstand winds in excess of 200 mph. The 360 degree bottom air inlet aupper mounted rotating water distribution bar provide a most efficient counter-flow water-to-air design for tmost efficient cooling in high ambient conditions. All FRP casings are warranted for 10 years against decay a

rot providing you with assurance of the best quality available in a fiberglass tower.

American Chillers can also provide you with tanks, pumps and control panels, to provide the most efficiesystem for your applicatioFrom fan motors to fan blades, we have the parts to fix your cooling tower and keep you cool.

Cooling Tower BrochureCooling Tower Parts

http://amchiller.com/literature/13_Cooling_Tower_Brochure_1.pdfhttp://amchiller.com/literature/Cooling%20Tower%20Parts%20List%202013.pdfhttp://amchiller.com/literature/Cooling%20Tower%20Parts%20List%202013.pdfhttp://amchiller.com/literature/Cooling%20Tower%20Parts%20List%202013.pdfhttp://amchiller.com/literature/Cooling%20Tower%20Parts%20List%202013.pdfhttp://amchiller.com/literature/13_Cooling_Tower_Brochure_1.pdf

8/12/2019 American Chillers and Cooling Tower Systems.docx

2/2

Design Features:

Lightweight and compact, the modular design of the FRP cooling tower provides easier installation and simplifiejob assembly. Wind direction will not affect the performance due to the unique 360 degree design of theaerodynamic fiberglass casing.

Fiberglass casing:

Individual fiberglass panels bolt together with stainless steel hardware and are easily opened for periodiccleaning. the FRP fiberglass panels will last for a very long time as they are impervious to severe environmentalweather conditions.

Fan Blades:

The aerodynamic blade design helps conserve power and require much lower horsepower than comparable size

towers. They are also factory balanced to provide very quite, vibration free, operation. Models 3 through 50feature ABS plastic blades; Models 60 and above feature aluminum alloy, adjustable blades.

Fan Motors:

American Chiller models ACTS-3 thorugh ACTS-20- utilize direct drive motors; Models ACTS-225 and larger usebelt drive pulley/belt drive.

Air Flow:

The air is pulled into the tower through the plastic, anti-splash inlet louvers that encompass the 360 degree bas

opening. As the water falls down through the fill pack, the air moves vertically in counter-flowto it and exits outhe vortex opening in the top, above the fan.

Water Distribution:

A rotating head and sprinkler pipe assembly sits atop the center supply pipe, propelled around to distribute therwater across the top of the PVC fill pack. Models 3 though 60 use an ABS sprinkler head; 70 thorugh 1000 usean aluminum alloy sprinkler head. The sprinkler is propelled at tan average rate of 8 to 12 RPM by the inlet watpressure of between 2.1 psi - 8.1 psi.

PVC Fill Pack:

The honeycomb PVC fill pack has a very high heat transfer efficiency, making this "bottle" design the mostefficient cooling tower available. The PVC fill pack can be used for inlet water temperature up to 115oF; above

that, polypropylene should be ordered.