· !"#$"%&'(')*&+,)-+,((./01023...

Post on 30-Nov-2018

220 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

402OPERATOR FOR HINGED GATES

THE SET

Electro-hydraulic overground hinged gate operator 402 CBC

Installation accessories

Unlocking key

Motor condensator

AT A GLANCE

Electro-hydraulic 230 V overground hinged gate operator

Suitable for gates with a max. gate leaf width up to 1.80 m

Hydraulic locking in CLOSE position

Silent mode

High-quality, wear resistant hydraulic

Power can be adjusted separately with the valves for open and

close positions

Optionally: Obstacle detection with gatecoder

SET Name Item No.

402 CBC 020364-31-3-32

Leader Kit (complete set) 155400-01-1-50

Please order separately Item No.

Control unit E145 (in housing ECO) 155402-02-1-50

The complete set „Leader Kit“ contains: 2 x electro-hydraulic over-ground hinged gate operator 402 CBC, control unit E145 (in housing ECO), hand transmitter MAX 43-2, installation accessories, light barrier, radio receiver (433 MHz, KeeLoq)

CBC

DETAILS

Packaged dimensions (H/W/D) N/A

Packaged weight 6.5 kg

Safety systemsPower adjustment valve (OPEN/CLOSE)

Max. running time Via control unit

Blocking Hydraulic

Connecting further safety features CLOSE position

Gear Hydraulic

Emergency release Via triangular key

Operating temperature - 20° C / + 55° C

POWER AND PERFORMANCE

Push and Pull force 5000 N

Supply voltage 230 V / 50 Hz

Working current 1 A

Operating voltage motor 230 V

Power consumption 220 W

Opening time for 90° 20 sec.

Operation area Private and small trade

Maximum gate leaf width 1.80 m

Maximum door weight 500 kg

Further functions Soft Start / Soft Stopp

FUNCTIONS

Control unit E145 (please order separately)

Control sequence1st pulse = Gate OPEN2nd pulse = Gate STOP3rd pulse = Gate CLOSE

Radio control433 MHz,KeeLoq rolling code

Lighting N/A

Wind permeability door leaf N/A

Control unit of the traffic leaf Possible

Additional functionsOptionally: obstacle detection via gatecoder

Automatic cut-outBed stops in end positions required

End-stop cut-out Programmable

Protection category IP 55

OPERATORS FOR HINGED GATES // 402 CBC

Compatible accessories are available separately. Subject to be changed.

Opening at 90°

a = 120 mm

b = 120 mm

240

Measurements in mm

top related