Каталог remeza_2015 Ганновер 2015.pdf
Post on 06-Jul-2018
226 Views
Preview:
TRANSCRIPT
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
1/32
ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIRFORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE
ISO 9001:2008
AIR COMPRESSORS CATALOGUE 2015LUFTKOMPRESSOREN KATALOG 2015
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
2/32
THE COMPANY REMEZA WAS FOUNDEDIN 1989. THE MAIN OBJECT: DESIGN ANDPRODUCTION OF A RELIABLE, AFFORDABLE COMPRESSOR
EQUIPMENT BY USING COMPONENTS OFTHE BEST WORLD MANUFACTURERS.
DIE FIRMA REMEZA WURDE 1989 MIT DEMZIEL GEGRÜNDET, EINE SICHEREDRUCKLUFTVERSORGUNG ZUVERNÜNFTIGEN UND MARKTGERECHTEN
PREISEN ZU GARANTIEREN UND DIESWELTWEIT. At present wide range of compressorequipment is manufactured:
Unser Standard- Lieferprogramm umfasst:
The equipment is certified according to CE standards.Quality management systems is certified according tothe international standard ISO 9001-2008.
Unsere Produkte entsprechen dem CE-Standard undsind nach den europäischen Standards zertifiziert.Unser Qualitäts-Management ist nach internationalemStandard ISO 9001-2008 zertifiziert .
2 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
CONVENTION / VERWENDETE SYMBOLE UND IHRE BEDEUTUNGReceiver volumeDruckluftbehälter Cylinders / stagesZylinder / StufenInput capacityAnsaugleistungDischargeLiefermenge
Max. operating Pressuremax. ArbeitsdruckElectric engine Power AntriebsleistungPower supplyStromversorgung
Compressor weightGewichtNoise levelLärmpegelRotations per minuteUmdrehungen pro Minute
Piston compressors for industrial purpose: pressurefrom 8 to 15 bar, capacity 200-2000 l/min., electricmotor power from 1,5 to 15,0 KW.Oil-free piston compressors for industrial purpose:pressure 8-14 bar, capacity 105-1620 l/min., electricmotor power from 0,75-11,0 KW.Medium-pressure piston compressors 20-30 bar,capacity 500-1000 l/min., electric motor power from
7,5-11,0 KWPressurizing piston compressors (boosters):pressure25-35 bar, capacity 2100-5500 l/min., electric motorpower from 15-22 KW.Oil-flooded screw compressors: 5-15 bar, capacity270-51600 l/min., electric motor power from 2,2-315KW. Options: integrated dryer (D), frequency converter(BC), heat recuperation (K), air cooled and watercooled.Oil-free low-pressure screw compressors of pressure1.5÷2.5 atm., capacity 421÷1070 m3/hour, electricmotor power 22÷75 KW.Special medical-purpose piston and screwcompressors. Options: noise insulation house,integrated dryer.Oil-free scroll compressors: pressure 8-10 bar,capacity 215-1640 l/min., electric motor power from2,2-15,0 KW.Special oil-flooded screw compressors with electricdrive for braking systems in railway application withoperation temperature from -55 °C to +55 °C.Special compressors for city transport.Portable diesel compressor.
made on a base of 20 and 40 Foot containers:pressure up to 35 bar and the required performance.Vertical air tanks with a capacity from 270 to 500 liters,pressure from 11 to 15 bar.
Kolbenkompressoren für allgemeine Industrieanwendungen:Druck: von 8 bis 15 bar, Liefermenge: 200 bis 2000Liter/Minute, Antriebsleistung: 1,5 bis 15,0 kWÖlfreie Kolbenkompressoren für allgemeineIndustrieanwendungen: Druck 8 bis 14 bar, Liefermenge:105 bis 1620 Liter/Minute, Antriebsleistung: 0,75 bis 11,0 kWHochdruck-Kolbenkompressoren: Druck: 20 bis 30 bar,Liefermenge: 500 bis 1000 Liter/Minute, Antriebsleistung:7,5 bis 11 kW.
Booster-Kolbenkompressoren: Druck: 25 bis 35 bar,Liefermenge: 2100 bis 5500 Liter/Minute, Antriebsleistung:15 bis 22 kWÖleingespritzte Schraubenkompressoren: Druck: 5 bis 15bar, Liefermenge: 270 bis 51600 liter/Minute,Antriebsleistung: 2,2 bis 315 kW Ausstattungsoptionen:eingebauter Kältetrockner (D),Frequenzumrichter (BC),Wärmerückgewinnung (K).Ölfreie Schraubenkompressoren für den Bereich: Druck: bis2,5 bar, Liefermenge: 421 bis 1070 m3/Std, Antriebsleistung:22 bis 75 kWSpezielle Kolben- und Schraubenkompressoren für denmedizinischen Bereich mit folgenden Ausstattungsoptionen:schallgedämmt, eingebautem Kältetrockner.Ölfreie Scroll Kompressoren: Druck: 8 bis 10 bar,Liefermenge: 215 bis 1640 Liter/Minute, Antriebsleistung:2,2 bis 15 kWSpezielle Schraubenkompressoren mit elektrischen Antriebfür den Eisenbahnbereich. Max. emperaturbereich: -55 °C
Spezielle Kompressoren für den öffentlichen, elektrischenNah- und Fernverkehr.Mobile Diesel-Kompressoranlagen.Die Kompressor-Serie MKP wird in 20-Fuß- und 40-FußContainern in Modulbauweise mit Leistungen bis zu 35 Barund die erforderliche Leistung.Druckbehälter mit einer Kapazität von 270 bis 500 Liter undeinem Druck von 11 bis 15 bar.
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
3/323 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
1,5 kW 1,8 kW
1,5 kW 2,2 kW
3,0 kW
4,0 kW
MODEL / TypC/StLt
SB4/С-50.АВ248A
SB4/С-100.АВ248A
2/1
2/1
2/1
2/1
50
100
SB4/С-50.АВ360 50
SB4/С-100.АВ360
kW
1,5
1,5
2,2
2,2
bar
10
10
10
10
kg
59
76
70
80100
850 × 400 × 770
1150 × 500 × 1000
850 × 400 × 770
1150 × 500 × 1000
A × B × C, mm
Dimensions Abmessungen
l/min
250
250
360
360
V
230
230
230/400
230/400
MODEL / TypC/StLt
SB4/С-24.GM193
SB4/С-24.GM244
1/1
1/1
1/1
1/1
24
24
SB4/С-50.GM193 50
SB4/С-50.GM244
kW
1,5
1,8
1,5
1,8
bar
8
8
8
8
kg
29
29
42
4250
590 × 270 × 600
590 × 270 × 600
850 × 410 × 700
850 × 410 × 700
A × B × C, mm
Dimensions Abmessungen
l/min
240
260
240
260
V
230
230
230
230
MODEL / Typ
SB4/С-50.АВ515
SB4/С-100.АВ515
900 × 400 × 800
1150 × 500 × 1000
SB4/С-200.АВ515 1460 × 640 × 1150
kW
3,0
3,0
3,0
bar
10
10
10
kg
85
94
125
A × B × C, mm
Dimensions Abmessungen
Lt
50
100
200
C/St
2/1
2/1
2/1
V
400
400
400
l/min
515
515
515
MODEL / Typ
SB4/С-100.АВ678
SB4/С-270.АВ678
1150 × 620 × 1025
1650 × 660 × 1150
kW
4,0
4,0
bar
10
10
kg
125
175
A × B × C, mm
Dimensions Abmessungen
Lt
100
270
C/St
2/2
2/2
V
400
400
l/min
650
650
PISTON COMPRESSORS SERIES «FIAC»
KOLBENKOMPRESSORENDER MODELLREIHE «FIAC»
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
4/324 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
5,5 kW 7,5 kW
4,0+4,0 kW 5,5+5,5 kW 7,5+7,5 kW
2,2 kW 3,0 kW 4,0 kW 5,5 kW
7,5 kW 7,5+7,5 kW
15 bar
Air compressors with vertical air tank
MODEL / TypLt
SB4/С-100.АВ858
SB4/С-270.АВ858
100
270
SB4/F-500.АВ858 500
SB4/F-500.АВ998
kW
5,5
5,5
5,5
7,5
bar
10
10
10
10
kg
125
180
220
230200
1150 × 510 × 1150
1650 × 510 × 1150
2000 × 610 × 1250
2000 × 610 × 1250
A × B × C, mm
Dimensions Abmessungenl/min
850
850
850
1100
C/St
2/2
2/2
2/2
2/2
V
400
400
400
400
MODEL / TypLt
SB4/С-100.АВ360V
SB4/С-100.АВ515V
100
100
SB4/F-270.АВ678V 270SB4/F-270.АВ858V
kW
2,2
3,0
4,05,5
bar
10
10
1010
kg
80
98
200180270
630 × 540 × 1250
630 × 560 × 1300
650×
700×
1800650 × 700 × 1800
A × B × C, mm
Dimensions Abmessungen
l/min
360
515
650850
C/St
2/1
2/1
2/22/2
V
230/400
400
400400
MODEL / Typ
SB4/F-500.АВ678T
SB4/F-500.АВ858T
2050 × 610 × 1200
2050 × 610 × 1200
SB4/F-500.АВ998T 2050 × 610 × 1200
kW
4,0+4,0
5,5+5,5
7,5+7,5
bar
10
10
10
kg
310
330
350
A × B × C, mm
Dimensions Abmessungen
Lt
500
500
500
C/St
2/2
2/2
2/2
V
400
400
400
l/min
1300
1700
2200
MODEL
SB4/F-270.АВ858/15
SB4/F-500.АВ858/15
1650 × 510 × 1150
2000 × 610 × 1250
SB4/F-500.АВ858T/15 2000 × 610 × 1250
kW
7,5
7,5
7,5+7,5
bar
15
15
15
kg
200
250
330
A × B × C, mm
Dimensions Abmessungen
Lt
270
500
500
C/St
2/2
2/2
2/2
V
400
400
400
l/min
850
850
1700
Air compressors for 15 barKompressoren für Drücke bis 15 bar
Kompressoren mitvertikalem Druckbehälter
PISTON COMPRESSORS SERIES «FIAC»
KOLBENKOMPRESSORENDER MODELLREIHE «FIAC»
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
5/325 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
PISTON COMPRESSORS SERIES «FIAC»
PISTONCOMPRESSORS SERIES «REMEZA»
13 HP
1,5 kW 1,8 kW 2,2 kW
1,5 kW 2,2 kW
R – manual starter, E – electric starter. CE-Certification under process. Ausführung R – Handstarter, Ausführung E – Elektrischer Starter.Dieses Modell befindet sich im CE- Zertifizierungsverfahren
MODEL / TypC/StLt
SB4/С-50.LH20А-1.5
SB4/С-50.LH20-2.2
1/1
1/1
1/1
2/1
50
50
SB4/С-100.LH20-2.2 100
SB4/С-50.LB24
kW
1,5
2,2
2,2
2,2
bar
10
10
10
10
kg
69
69
84
7450
840 × 400 × 770
840 × 400 × 770
1150 × 490 × 850
820 × 440 × 750
A × B × C, mm
Dimensions Abmessungen
l/min
235
280
280
360
V
230
230/400
230/400
230/400
2/1SB4/С-100.LB24 2,210 86100 1100 × 490 × 830360 230/400
2/1SB4/С-50.LB30 2,210 8050 850 × 400 × 770420 230/4002/1SB4/С-100.LB30 2,210 90100 1150 × 490 × 850420 230/400
2/1SB4/С-200.LB30 2,210 126200 1550 × 560 × 1000420 230/400
MODEL / Typ
SB4/С-24.J1047B
SB4/С-50.J1047B
620 × 300 × 600
840 × 435 × 680
SB4/С-24.J1048B 600 × 280 × 680
kW
1,5
1,5
1,8
bar
8
8
8
kg
27
39
28
A × B × C, mm
Dimensions Abmessungen
Lt
24
50
24
C/St
1/1
1/1
1/1
V
230
230
230
l/min
200
200
260
SB4/С-50.J1048B 850 × 400 × 7401,88 4150 1/1 230260
SB4/С-50.J2047B 850 × 435 × 7252,28 5850 2/1 230400
SB4/С-100.J2047B 1080 × 490 × 8052,28 74100 2/1 230400
MODEL / Typ
SB4/С-100.858-SPE390R(E)
SB4/С-100.998-SPE390R(E)
1150 × 700 × 1000
1150 × 700 × 1000
bar
6/8
6/8
kg
135
165
A × B × C, mm
Dimensions Abmessungen
13
13
HPLt
100
100
C/St
2/2
2/2
l/min
850
1100
KOLBENKOMPRESSORENDER MODELLREIHE «FIAC»
KOLBENKOMPRESSORENDER MODELLREIHE «REMEZA»
Kompressoren mit 4 Takt Benzinmotor Piston compressors with engine drive
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
6/326 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
3,0 kW
5,5 kW
MODEL / TypLt
SB4/С-50.LB30-3.0
SB4/С-100.LB30-3.0
50
100
bar
9
9
850 × 400 × 770
1150 × 490 × 850
A × B × C, mm
Dimensions Abmessungen
C/St
2/1
2/1
kW
3,0
3,0
kg
77
92
V
400
400
l/min
500
500
SB4/С-200.LB30-3.0 200 9 1550 × 560 × 10002/1 3,0 130400500
SB4/С-50.LB40 50 10 900 × 400 × 8003/1 3,0 92400580
SB4/С-100.LB40 100 10 1130 × 500 × 8803/1 3,0 100400580
SB4/С-200.LB40 200 10 1460 × 640 × 11503/1 3,0 140400580
4,0 kW
MODEL / TypLt
SB4/С-100.LB50
SB4/F-270.LB50
100
270
bar
10
10
1150 × 550 × 1000
1590 × 500 × 1100
A × B × C, mm
Dimensions Abmessungen
C/St
2/1
2/1
kW
4,0
4,0
kg
130
180
V
400
400
l/min
690
690
MODEL / TypLt
SB4/С-100.LB75
SB4/F-270.LB75
100
270
SB4/F-500.LB75 500
bar
10
10
10
1150 × 550 × 1150
1650 × 510 × 1150
2000×
610×
1250
A × B × C, mm
Dimensions Abmessungen
C/St
3/1
3/1
3/1
kW
5,5
5,5
5,5
kg
143
195
230
V
400
400
400
l/min
950
950
950
SB4/F-270.LB50-5.5 10270 1660 × 515 × 11002/1 5,5 185400880
PISTON COMPRESSORS SERIES «REMEZA»
KOLBENKOMPRESSORENDER MODELLREIHE «REMEZA»
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
7/32
7,5 kW 11,0 kW
5,5+5,5 kW
MODELLt
SB4/F-500.LT100
SB4/F-500.LT100-11.0
500
500
SB4/F-500.LT100/15-7.5 500
SB4/F-500.LT100/15
bar
10
10
15
15500
2000 × 610 × 1250
2000 × 615 × 1250
2000 × 610 × 1250
2000 × 610 × 2053
A × B × C, mm
Dimensions Abmessungen
C/St
4/2
4/2
4/2
4/2
kW
7,5
11,0
7,5
11,0
kg
340
370
370
385
V
400
400
400
400
l/min
1400
1700
1000
1400
4,0 kW 5,5 kW 7,5 kW
MODELLt
SB4/F-500.LB50D
SB4/F-500.LB75D
500
500
SB4/F-500.LT100D 500
bar
10
10
10
2210 × 620 × 1210
2210 × 650 × 1390
2210 × 650 × 1390
A × B × C, mm
Dimensions Abmessungen
C/St
2/1
3/1
4/2
kW
4,0
5,5
7,5
kg
300
312
390
V
400
400
400
l/min
690
950
1400
MODELLt
SB4/F-500.LB75T 500
bar
10 2000 × 610 × 1250
A × B × C, mm
Dimensions Abmessungen
C/St
3/1
kW
5,5+5.5
kg
365
V
400
l/min
1900
PISTON COMPRESSORS SERIES «REMEZA»
KOLBENKOMPRESSORENDER MODELLREIHE «REMEZA»
PISTON COMPRESSORS SERIES «REMEZA» WITH INTEGRATED DRYER
KOLBENKOMPRESSORENDER MODELLREIHE «REMEZA»MIT EINGEBAUTEM KALTETROCKNER
..
7 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
8/32
PISTON COMPRESSORS SERIES «REMEZA»
MOBILE PISTON COMPRESSORS WITHELECTRIC MOTOR SERIES «REMEZA»
MOBILE PISTON COMPRESSORS WITH ENGINE DRIVE SERIES «REMEZA»
2,2 kW 3,0 kW 4,0 kW 5,5 kW 7,5 kW
5,5 kW 7,5 kW
11,0 kW
13 HPENGINE
13 PSBenzin
Air compressors with vertical air tank
Kompressoren mitvertikalem Druckbehälter
MODEL / Typ
SB4/С-90.LB75
SB4/C-90.W95/6
1400 × 840 × 1030
1400 × 860 × 1160
SB4/C-90.W115/6 1400 × 860 × 1160
kW
5,5
7,5
11,0
bar
8
6
6
kg
180
240
330
A × B × C, mmLt
90
90
90
C/St
3/1
3/1
3/1
V
400
400
400
l/min
980
1700
2800
MODEL / Typ
SB4/С-90.LB75.SPE390R(E)
SB4/C-90.W95/6.SPE390R(E)
1400 × 840 × 1030
1400 × 840 × 1160
bar
8
6
HP
13
13
EngineBenzin
EngineBenzin
kg
180
250
A × B × C, mmLt
90
90
C/St
3/1
3/1
l/min
980
1700
MODEL / Typ
SB4/С-100.LB30V
SB4/C-100.LB40V
630 × 540 × 1240
630 × 560 × 1300
SB4/F-270.LB50V 650 × 700 × 1750
A × B × C, mm
Dimensions Abmessungen
Dimensions Abmessungen
Dimensions Abmessungen
Lt
100
100
270
C/St
2/1
3/1
2/1
l/min
420
580
690
SB4/F-270.LB75V 650 × 700 × 1800270 3/1 950
SB4/F-270.LT100V 1055 × 620 × 1900
kW
2,2
3,0
4,0
5,5
7,5
bar
10
10
10
10
10
kg
97
110
180
195
286270 4/2
V
230/400
400
400
400
4001400
KOLBENKOMPRESSORENDER MODELLREIHE «REMEZA»
MOBILE KOMPRESSOREN MIT ELEKTRISCHEM ANTRIEB MODELLREIHE «REMEZA»
MOBILE KOMPRESSORENMIT 4 TAKT BENZINMOTOR
Fueltype
Kraft-stoffart
R – manual starter, E – electric starter CE-Certification under process
Ausführung R – Handstarter, Ausführung E – Elektrischer Starter Dieses Modell befindet sich im CE-Zertifizierungsverfahren
8 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
9/32
15,0 kW 18,5 kW 22,0 kW
7,5 kW 11,0 kW
30 bar20 bar
BOOSTER SERIES «REMEZA»BOOSTER MODELLREIHE «REMEZA»
AIR COMPRESSORS OF AVERAGEPRESSURESERIE «REMEZA»MITTELDRUCK-KOMPRESSORENMODELLREIHE «REMEZA»
MODELTyp
BA20/2 1500 × 750 × 900
A × B × C, mm
Dimensions Abmessungen
BA20/3
BA25
BA25
BA30
1500 × 750 × 900
35 bar
2100
2700
3300
–
–
–
2700
3400
4150
–
–
–
3300
4300
5000
25 bar
2200
2800
3500
2800
3600
4300
–
–
–
3500
4500
5500
–
–
–
C/St
2/1
3/1
3/1
3/1
3/1
1500 × 750 × 900
1500 × 750 × 900
1500 × 750 × 900
kg
300
330
345
345
395
kW
15,0
15,0
18,5
18,5
22,0
bar
6
8
10
6
8
10
6
8
10
6
8
10
6
8
10
Inletpressure
l/min
2750
3500
4200
3600
4500
5400
3400
4300
5200
4400
5600
6900
4200
5400
6300
Requiredinlet volume
l/min
Productivity
rpm
760
650
650
760
760
MODEL / Typ
BP10-30
BP15-20
1300 × 600 × 700
1300 × 600 × 700
bar
30
20
kg
195
215
A × B × C, mm
Dimensions Abmessungen
C/St
2/2
2/2
l/min
500
1000
kW
7,5
11,0
rpm
800
1250
BP15-30 1300 × 600 × 70030 2152/2 800 11,01000
Eingangs-druck Ansaug-
leistung
Leistung
9 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
10/3210 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
AIR TANK SERIES «REMEZA»
MOBILE PISTON COMPRESSORS WITHELECTRIC MOTOR SERIES «REMEZA»
OIL FREE COMPRESSORS SERIES «REMEZA»
11 bar15 bar
NEW 1,8 kW
0,75 kW 1,1 kW 1,4 kW
1,1+1,1 kW 1,4+1,4 kW
..
MODEL / Typ
SB4/C-20.GM244
SB4/C-24.GM244/10
480 × 400 × 780
600 × 330 × 630
SB4/C-20.VX304 480 × 420 × 780
kW
1,8
1,8
1,8
bar
10
10
10
kg
32
29
45
A × B × C, mmLt
20
24
20
C/St
1/1
1/1
2/1
V
230
230
230
l/min
260
260
300
MODEL / Typ
РВ 270.11
РВ 270.15
630 × 540 × 1250
630 × 560 × 1300
РВ 500.11 650 × 650 × 1750
A × B × C, mm
Dimensions Abmessungen
Dimensions Abmessungen
MODEL / Typ
SB4/С-24.OLD10
SB4/С-24.OLD15
595 × 300 × 600
595 × 300 × 660
SB4/С-24.OLD20 595 × 300 × 660
kW
0,75
1,1
1,4
bar
8
8
8
kg
28
34
36
A × B × C, mmLt
24
24
24
C/St
2/1
2/1
2/1
V
230
230
230
db
65
68
68
l/min
105
150
200
SB4/С-50.OLD15 840 × 445 × 7401,18 4450 2/1 230 68150SB4/С-50.OLD20 840 × 445 × 7401,48 4650 2/1 230 68200
SB4-100.OLD15T 1180 × 420 × 9001,1+1,18 88100 2/1 230 72300
SB4-100.OLD20T 1180 × 420 × 9001,4+1,48 89100 2/1 230 72400
Dimensions Abmessungen
РВ 500.15 650 × 700 × 1800
bar
11
15
11
15
kg
95
116
125
150
Lt
270
270
500
500
DRUCKBEHALTER «REMEZA»
MOBILE KOMPRESSOREN MIT ELEKTRISCHEM ANTRIEB MODELLREIHE «REMEZA»
OLFREIE KOMPRESSORENMODELLREIHE «REMEZA»
..
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
11/32
NEW
INDUSTRIAL OIL FREE PISTONCOMPRESSORS «REMEZA»
OLFREIE- INDUSTRIE-KOLBENKOMPRESSOREN «REMEZA»
..
TECHNICAL FEATURESOF COMPRESSOR UNIT:
Reliable, high-tech piston Compressor unitsmanufactured in JapanMaintenance Interval is 10,000 hoursPistons and compression rings are very resistantagainst abrasion and high tempertureMaterial of compression rings is TeflonHigh efficiency and high quality Air filterUsage of Aftercooler
PROFESSIONAL SERIES. Applications in food,pharmaceutical, cosmetic, chemical industryand other industrial applications.Ideal source of compressed air, in which oilfreeair is required.
PROFESSIONAL SERIES. Anwendungen in derLebensmittel-, Pharma-, Kosmetik- oderchemischen Industrie und anderen industriellenAnwendungen.Ideale Druckluftversorgung, in der ölfreieDruckluft Voraussetzung ist.
ADVANTAGES OF INDUSTRIAL OIL FREE PISTON AIRCOMPRESSORS «REMEZA»:
Compressors can be ordered on base frame without receiver or on receiver with volumefrom 100 to 500 Liter.
Long life operationLow operating costsLow maintenance costsLong service lifeOperating Pressure up to 14 bar Vibration dampers can be adjustedaccording to installation areaEasy access to key components
TECHNISCHE EIGENSCHAFTENDER KOMPRESSOREN:
Zuverlässige, High-Tech-Kolbenverdichter«Made in Japan»Revision erst nach 10.000 BetriebsstundennotwendigKolben und Kompressionsringe sehr resistentgegen hohe Temperaturen und VerschleißKompressionsringe aus hochwertigem TeflonAnsaugluftfilter mit hohem FiltrationsgradKühlung durch Nachkühler
VORTEIL DER ÖLFREIENINDUSTRIE-KOLBENKOMPRESSOREN«REMEZA»:
Kompressoren können auf Grundrahmen oder mit Druckluftbehälter zwischen 100und 500 Litern geliefert werden.
Außergewöhnliche ZuverlässigkeitGeringe BetriebskostenGeringe WartungskostenLange Lebensdauer Betriebsdruck bis zu 14 bar Verstärkte, verstellbareSchwingungsdämpfer Einfacher Zugang zu den Komponenten
11 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
12/32
NEW 2,2 kW
NEW 4,0 kW 5,5 kW
NEW 7,5 kW
11,0 kW
INDUSTRIAL OIL FREE PISTONCOMPRESSORS «REMEZA»
OLFREIE- INDUSTRIE-KOLBENKOMPRESSOREN «REMEZA»
..
MODEL / Typ
SB4-F37SB4-270.F37
1100×
600×
7001670 × 600 × 1200
SB4-F55 1100 × 600 × 740
kW
4,04,0
5,5
bar
1010
10/14
kg
101180
130
A × B × C, mmC/St
2/12/1
2/2
V
400400
400
l/min
675675
690/560
SB4-500.F55 2000 × 620 × 14405,510/14 250
Lt
–270
–
500 2/2 400690/560
Dimensions Abmessungen
MODEL / Typ
SB4-F75
SB4-500.F75
1100 × 625 × 780
2000 × 620 × 1440
SB4-F110 1100 × 620 × 820
kW
7,5
7,5
11,0
bar
10/14
10/14
10/14
kg
158
315
180
A × B × C, mmC/St
3/2
3/2
3/2
V
400
400
400
l/min
1120/900
1120/900
1620/1300
SB4-500.F110 2000 × 620 × 144011,010/14 337
Lt
–
500
–
500 3/2 4001620/1300
Dimensions Abmessungen
MODEL / Typ
SB4-F22
SB4-100.F22
900 × 550 × 700
1180 × 500 × 1000
kW
2,2
2,2
bar
10
10
kg
67
88
A × B × C, mmLt
–
100
C/St
2/1
2/1
V
230/400
230/400
l/min
420
420
Dimensions Abmessungen
12 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
13/32
0,75 kW 1,1 kW
1,5 kW
0,75 kW 1,1 kW 1,5 kW
1,8 kW 1,5+1,5 kW
OIL FREE COMPRESSORSSERIE «REMEZA»
OLFREIE KOMPRESSORENMODELLREIHE «REMEZA»
..
MODEL / Typ
SB4-24.F114
SB4-24.GMS150
480 × 460 × 750
480 × 460 × 665
SB4-24.GMS150D 480 × 460 × 655
kW
0,75
1,1
1,1
bar
8
8
8
kg
35
40
45
A × B × C, mmLt
24
24
24
C/St
1/1
1/1
1/1
V
230
230
230
db
72
75
75
l/min
100
150
150
SB4-50.GMS150 480×
460×
8351,18 5050 1/1 230 75150SB4-24.VS204 480 × 460 × 6701,58 4524 2/1 230 75200
SB4-24.VS204D 480 × 460 × 6701,58 5024 2/1 230 75200
SB4-50.VS204
SB4-24.VS254
SB4-24.VS254D
SB4-50.VS254
SB4-50.VS254D
SB4-100.VS204T
SB4-100.VS204TD
SB4-100.VS254T
SB4-100.VS254TD
480 × 460 × 840
480 × 460 × 670
480 × 460 × 670
480 × 460 × 840
655 × 460 × 830
1140 × 440 × 865
1140 × 440 × 865
1140 × 440 × 865
1140 × 440 × 865
1,5
1,8
1,8
1,8
1,8
1,5+1,5
1,5+1,5
1,8+1,8
1,8+1,8
8
8
8
8
8
8
8
8
8
50
45
50
50
55
105
110
105
110
50
24
24
50
50
100
100
100
100
2/1
2/1
2/1
2/1
2/1
2/1
2/1
2/1
2/1
230
230
230
230
230
230
230
230
230
75
75
75
75
75
79
79
79
79
200
SB4-50.VS204D 480 × 460 × 8301,58 5550 2/1 230 75200
250
250
250
250
400
400
500
500
Dimensions Abmessungen
MODEL / Typ
SB4-8.F114K
SB4-16.GMS150K
760 × 400 × 615
515 × 640 × 800
SB4-16.GMS150KD 515 × 640 × 800
kW
0,75
1,1
1,1
bar
8
8
8
kg
45
80
85
A × B × C, mmLt
8
16
16
C/St
1/1
1/1
1/1
V
230
230
230
db
57
57
57
l/min
100
150
150
SB4-16.VS204K 515 × 640 × 8001,58 8516 2/1 230 65200
SB4-16.VS204KD 515 × 640 × 8001,58 8716 2/1 230 65200
Dimensions Abmessungen
serie D – with air dryer Polymeric coating inside receiver
serie D – with air dryer serie K – noise insulation housePolymeric coating inside receiver
Ausführung D – mit eingebautem Adsorbtionstrockner Ausführung T – Tandem- AusführungDruckbehälter mit Polymer- Innenbeschichtung
Ausführung D – mit eingebautem Adsorbtionstrockner Ausführung K – mit SchallisolierungDruckbehälter mit Polymer- Innenbeschichtung
13 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
14/32
OIL-FREE SCROLL COMPRESSORS
NEW 2,2 kW 4,0 kW 5,5 kW 7,5 kW
4,0+4,0 kW 5,5+5,5 kW 7,5+7,5 kW
..OLFREIE SCROLL-KOMPRESSORENHighly reliable, low-noise oil-free scrollcompressors – an ideal source ofcompressed air, in which oilfree air isrequired (food, electronics,
pharmaceuticals, textile industry, etc.)
Zuverlässige, geräuscharme,ölfreie Scroll-Kompressoren - dieideale Druckluftversorgung in derölfreie Druckluft Voraussetzung ist
(Lebensmittel-, Elektronik-,Pharma-, Textilindustrie, etc.)
ADVANTAGES OF OIL-FREE SCROLL COMPRESSORS «REMEZA»:
Modern, advanced technology, highreliabilityHighly purified intake air (up to 5 micronsfrom dust and mechanical particles) througha special air filterEasy maintenance and low operating costs.Technical Maintenance reduced to replacethe air filter cartridge and adjusting the belttensionNoise instalation cover, low noise and vibration leads to the ability to install thecompressor directly next to the working areaThe minimum number of moving partsensures a long service life.
VORTEILE ÖLFREIESCROLL-KOMPRESSOREN«REMEZA»:
Moderne, fortschrittliche Technologie, hoheZuverlässigkeitHochreine, bis 5 Mikron gereinigte Ansaugluft durcheinen speziellen Ansaugluftfilter Einfache Wartung und geringe Betriebskosten.Technische Wartung reduziert sich auf Luftfilterwechselund Kontrolle der RiemenspannungSchalldämmgehäuse, geringe Geräuschentwicklungund Vibrationen ermöglichen die Installation direkt im
ArbeitsraumDie minimale Anzahl beweglicher Teile sorgt für einelange Lebensdauer
MODEL / Typ
КС3-8(10) 790 × 550 × 765kW
2,2bar
8/10kg
115 A × B × C, mmLt
– V
400400400
400400400400400400400400400400400400400
400400400400400400400400400400400400400
400400400400
l/min
250/215
Dimensions Abmessungen
db
62КС3-8(10)М 850 × 550 × 7652,28/10 120– 250/215 62КС3-8(10)-270 1600 × 600 × 13602,28/10 210270 250/215 62
КС3-8(10)-270D 1600 × 600 × 13602,28/10 235270 250/215 62КС3-8(10)-270М 1600 × 600 × 13602,28/10 220270 250/215 62КС5-8 790 × 550 × 7654,08 125– 410 63КС5-8М 850 × 550 × 7654,08 135– 410 63КС5-8-270 1600 × 600 × 13604,08 225– 410 63КС5-8-270D 1600 × 600 × 13604,08 250270 410 63КС5-8-270М 1600 × 600 × 13604,08 235270 410 63КС5-10 790 × 550 × 7654,010 125– 345 63КС5-10М 850 × 550 × 7654,010 135– 345 63КС5-10-270 1600 × 600 × 13604,010 225270 345 63КС5-10-270D 1600 × 600 × 13604,010 250270 345 63КС5-10-270М 1600 × 600 × 13604,010 235270 345 63КС5-8-500Т 1930 × 620 × 14504,0+4,08 410500 820 68
КС5-8-500ТМ 1930×
760×
14504,0+4,08 430500 820 68КС5-10-500Т 1930 × 620 × 14504,0+4,010 410500 690 68КС5-10-500ТМ 1930 × 760 × 14504,0+4,010 430500 690 68КС7-8 980 × 670 × 10205,58 215– 605 64КС7-8М 1080 × 670 × 10205,58 230– 605 64КС7-8-270 1600 × 670 × 16155,58 310270 605 64КС7-8-270D 1600 × 670 × 16155,58 335270 605 64КС7-8-270М 1600 × 670 × 16155,58 350270 605 64КС7-8-500Т 2050 × 670 × 17805,5+5,58 620500 1210 69КС7-8-500ТМ 2050 × 900 × 17805,5+5,58 650500 1210 69КС10-8 980 × 670 × 10207,58 225– 820 65КС10-8М 1080 × 670 × 10207,58 240– 820 65КС10-8-270 1600 × 670 × 16157,58 320270 820 65
КС10-8-270D 1600×
670×
16157,58 345270 820 65КС10-8-270М 1600 × 670 × 16157,58 360270 820 65КС10-8-500Т 2050 × 670 × 17807,5+7,58 640500 1640 70КС10-8-500ТМ 2050 × 900 × 17807,5+7,58 670500 1640 70
А
А
B
B
С
С
D – with air dryer (refrigeration type).
T – tandem (two compressors on one receiver).
D – mit Kältetrockner. T – tandem.
14 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
15/32
SCREW COMPRESSORSIDEAL SOURCE OF COMPRESSED AIR
SCHRAUBENKOMPRESSOREN die ideale Drucklufterzeugung
ADVANTAGE OF SCREWCOMPRESSOR STATIONS:
Less weight and smaller overall sizes in comparison withpiston compressors.High reliability.High output discharge at low energy consumption.Low noise level (compressors are equipped with soundinsulation house).Little vibration because of absence of parts performingback-and-forth motion.Insignificant pressure fluctuation in the compressed air net. Air cooling.Simplicity of assembly (no necessity of foundation).Simplicity and comfort when servicing and operating. Themaintenance interval is up to 4000 hours.During operation no permanent presence of staff isrequired.Designed for continuous work.High quality of compressed air (thanks to the integraltwo-stage oil-separation system).Easy access to spare parts.
Screw airends of GHH RAND, ROTORCOMP, AERZEN (Germany), one of the leaders in the world market of compressor industry fordevelopment and manufacturing of compressorunits:• are designed for the permanent continuous work up to 24 hours a day under differentoperation conditions;• reliable asymmetric design rotor’s profilesprovides the maximal output capacity andefficiency, saves energy consumption at high volume flow;• work lifetime up to 100 000 hours; Asynchronous three-phase electric enginesof the company «Siemens» (Germany) and ABB (Switzerland) , protection class IP55,isolation class F, integral PTC control oftemperature of engine windings (beginning from75 KW):• high efficiency coefficient;• high reliability, long service life, simplicity ofoperation;• world-acknowledged quality.Integral frequency converters of the company«Danfoss» and ABB allow to change rotation per
minute of the electric motor and thus to regulate theoutput capacity of compressor in the range from30% to 100% of the nominal rotation (option BC).• Smooth start and stop of the motor.• Saving of electric energy consumption at theexpense of conformity of the used energy to theactual consumption of compressed air andexclusion of idle run phases.Integral dryer and filter systems allows to receivedry and clean air of the necessary class.Units of thermal energy recuperation (option K)allow to use the heat caused by compressoroperation, for water heating.Two-stage oil-separation system provides theresidual content of oil in compressed air not morethan 3 mg/m 3 .The use of quick-detachable oil filters, air filtersand separators reduces the idle time of theequipment when carrying out the maintenanceservice.High-efficient direct drive.In compressors BK60-BK430 the state of the airfilter is controlled by the pollution sensor withinformation output to the control panel.
Die Schraubenk ompressorb löcke der Firma GHH RAND, AERZEN (Deutschland) – Marktführer in Produktion undEntwicklung auf dem weltweiten Markt der Kompressorenin-dustrie.• Sie sind für die ständige und ununterbrochene Arbeit vonbis zu 24 Stunden pro Tag unter verschiedenen Arbeits-bedingungen ausgelegt.• Die asymmetrische Konstruktion der Profile der Rotoren vonGHH RAND gewährleisten eine maximale Produktivität undEffizienz und sparen so einen erheblichen Teil der benötigtenElektroenergie ein.• Lebensdauer von bis zu 100.000 Stunden möglich.• Durch die spezielle Konstruktion wird eine Belastung derDruckluft mit Öl stark reduziert.Die asynchronen dreiphasigen Elektromotoren derFirma «Siemens» (Deutschland) und ABB (Schweiz) entsprechen der Schutzklasse IP55, Isolationsklasse F, miteingebauter Temperatur-Kontrolle (ab 75 kW):• hoher Wirkungsgrad nach IE-Standard;• hohe Zuverlässigkeit, lange Laufzeit, einfache Bedienung;• weltweit anerkannte Qualität.Schalt- und Regelungstechnik Firma «Danfoss» und ABB ermöglichen einen effektiven und energiesparenden Einsatzder Elektromotoren und somit eine Anpassung der Produktivitätund Effektivität der Kompressoren von 30% bis 100% derNutzlast (Ausführung BC):• schonender An- und Auslauf des Elektromotors• Energieeinsparung durch Frequenzregelung des Elektro-motors.Eingebaute Trockner, in Verbindung mit einem Filtersystem,ermöglichen die Erzeugung trockener und reiner Luft der jeweilsnotwendigen Qualität.Die Energierückgewinnungsblöcke (Ausführung K) ermög-lichen die Nutzung der Abwärme zur Warmwasseraufberei-tung.Das zweistufige Ölsystem gewährleistet, dass der Restgehaltan Öl in der Druckluft nicht mehr als 3 Milligramm/m3 beträgt.Die schnell zu wechselnden Öl-/Luftfilter und Ölabscheiderverringern die Stillstandszeit der Kompressoren bei derWartung.In den Kompressoren BK60 – BK430 wird der Zustand desLuftfilters von zusätzlichen Sensoren auf Verschmutzungüberprüft und auf dem dazugehörigen Informationsdisplaydargestellt.
TECHNISCHE EIGENSCHAFTENDER KOMPRESSOREN:
Hohe Zuverl ässigkeit und Produktivit ä t.Hohe Produktivit ä t bei niedrigem Energieeinsatz.Niedriger L ärmpegel (die Kompressoren sind mitSchalld ämmhauben ausgestattet).Geringe Vibrationen, da keinerlei Hubbewegung vorhanden.Geringe Schwankungen im Druckluftnetz.Einfache Montage (keine Fundamentveranker-ung notwendig).Einfache Bedienung. Wartungsintervalle von biszu 4000 Stunden.Fü r die lange, ununterbrochene Arbeit bestens
geeignet.Hohe Qualit ä t der Druckluft (aufgrund des zwei-stufigen Öl-System).
15 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
16/32
PROGRAMMABLE CONTROLLERS
PROGRAMMIERBARE STEUEREINHEITEN
AIRMASTER P1Multi-functional industrial electronic control unit (controller AirMaster P1) is designed for controlling air compressors. Theinformation is carried out on the liquid crystal display withhighlighting. In the display the symbol system is used which issupported by the text with a free choice of the language. Thecontroller is fully compatible with network RS485 (the option isinstalled additionally on request).CONTROLLER AIRMASTER CARRIES OUT THE FOLLOWINGFUNCTIONS:
power-saving mode of the compressor operation (start of theelectric engine according to the scheme «star-delta»; theoperating regime is load, idle, temporary cutoff, at the absenceof compressed air consumption;electronic control of parameters (compressed air pressure,temperature of the oil and air mixture, condition of the button«emergency stop» and effective control of operating parametersof the compressor;effective protection and emergency stop of the compressor atthe onset of emergency situations with the indication of warningmessages;automatic indication of the necessity to carry out themaintenance intervall;control of operating time at different operation regimes of thecompressor and nonvolatile memory of the operation regime,emergency cut-offs and conductance of maintenance service,control of the multilevel system from the unauthorized access tothe compressor parameters;possibility of remote control of the compressor.
Die multifunktionale industrielle elektronische Steuereinheit istspeziell für die Steuerung und Kontrolle von Kompressorenausgelegt. Die Anzeige der Informationen erfolgt auf einemLCD-Display.Die Benutzeroberfläche bietet eine einfache und intuitiveSymbol-Steuerung.Die Steuereinheit ist mit der Schnittstelle RS485 ausgerüstet.Die Steuereinheit Air Master P1 hat folg ende Funktion en:
Energiesparende Funktionen: Start des Elektromotors nachdem Schema der «Stern-Dreieck-Schaltung», dieVerwaltung der Arbeitsmodi des Kompressors (Leerlaufbzw. die vorübergehende Abschaltung, wenn keineDruckluft benötigt wird);die elektronische Überwachung von Druck und Temperatur,Überwachung des “Not Aus” und die effektive Verwaltungder Arbeitsparameter des Kompressors;Schutz und Abschaltung des Kompressors bei Notfällen mitden entsprechenden Benachrichtigungen;automatische Benachrichtigung über Serviceintervalle;die Kontrolle der Nutzungsdauer bei den verschiedenenArbeitsmodi des Kompressors (mit dauerhafter Speicherungder Daten), die Notabschaltungen und die Überwachung beiunbefugtem Zugriff auf die Daten des Kompressors;die Möglichkeit der Fernsteuerung des Kompressors.
AIRMASTER S1
Multi-functional industrial microprocessor control unit (controller AirMaster S1) is designed for the control of operation of air screwcompressors. The user interface is equipped with simple andintelligible regulation buttons with the indicator highlighting. Thecompressor state is vividly displayed onto the liquid crystal display.In the display the symbol system is used which is supported by thetext with a choice of the language.The controller is fully compatible with a number of computersystems and can be added by them, providing the effectivecontrol, control and analysis. For connecting with other
systems the network RS485 is used. As compared with thecontroller AirMaster P1 the controller AirMaster S1 has a moreenhanced function range.
power-saving mode of the compressor operation (start of theelectric engine according to the scheme «star-delta»;operation in regimes of load, idle; the compressor operation withthe frequency-regulated drive; temporary cutoff of thecompressor electric engine at the absence of compressed airconsumption;control and effective control, including the remote control, ofoperating parameters of the compressor both in the manual andautomatic modes, effective protection and emergency stop of thecompressor at emergency situations with the indication of warning messages;automatic indication of the necessity to carry out the maintenanceintervall;control of operating time at different operation regimes of thecompressor and nonvolatile memory of the operation regimes,emergency cut-offs and time of carrying out the maintenanceservice, control of the multilevel system from the unauthorizedaccess to the compressor parameters;at the installation of the additional equipment – remote control ofparameters and operation of pneumatic systems consisting ofcompressors of different models and manufacturers.
Die multifunktionale industrielle Steuereinheit ist für dieVerwaltung und die Kontrolle der Arbeitsweise derSchraubenkompressoren bestimmt.Die Benutzeroberfläche bietet eine einfache und intuitiveSymbol-Steuerung.Der Zustand des Kompressors wird auf dem LCD-Displayanschaulich dargestellt.Die Steuereinheit ist mit der Schnittstelle RS485 ausgerüstet.Die Steuereinheit ist mit einer Reihe von Computersystemenvollständig kompatibel und kann für eine wirksame Kontrolle
und Verwaltung und Analyse eingesetzt werden. Für dieVerbindung mit anderen Systemen wird die bewährteSchnittstelle RS485 verwendet. Im Vergleich zurSteuereinheit AirMaster P1 hat di e Steuereinheit AirMaster S1einen größeren Funktionsumfang.
Energiesparende Funktionen: Start des Elektromotors nachdem Schema der «Stern-Dreieck-Schaltung», die Verwaltungder Arbeitmodi des Kompressors (Leerlauf bzw. dievorübergehende Abschaltung, wenn keine Druckluft benötigtwird);Kontrolle und effektive Verwaltung der Arbeitsparameter desKompressors, sowohl im manuellen als auch im automatischenBetriebsmodus;Schutz und Abschaltung des Kompressors bei Notfällen mit denentsprechenden Benachrichtigungen;automatische Benachrichtigung über Serviceintervalle;die Kontrolle der Nutzungsdauer bei den verschiedenenArbeitsmodi des Kompressors (mit dauerhafter Speicherungder Daten), die Notabschaltungen und die Überwachung beiunbefugtem Zugriff auf die Daten des Kompressors;zusätzlich kann eine Fernsteuerung des Kompressors überKomponenten des Pneumatiksystems des Betreiberserfolgen.
16 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
17/32
PROGRAMMABLE CONTROLLERS
PROGRAMMIERBARE STEUEREINHEITEN
ENERGAIRMETACENTRE
EnergAir Metacentre is a specialized microprocessor system forcontrol of the working group of compressors (up to 24compressors) included into the common compressed-air network.It allows to regulate and control pressure in the set parameters inany point of the user’s compressed-air network.MAIN POSSIBILITIES OF ENERGAIR METACENTRE:
Connection, control and regulation of operation from 2 to 24screw compressors of any models and types of differentmanufacturers.Maintenance of constant pressure in the controlled point of thecompressed-air network with the precision up to 0,2 bar.Table technology which allows to form up to 6 different groups,
with the different strategy of control and regulation of operationof compressor plants.Real time clock allows to set more accurately the pressureparameters, referred to real time.Intelligence system of preliminary control of pressure in thesystem. The possibility of adjustment of pressure parameters atany time.Mode of regulation of electric power consumption at theexpense of the modern effective control system and control ofoperation modes of compressors.Intelligent system of control of the operation of two and morecompressors equipped with the frequency transducer.Possibility of control of operation of the auxiliary equipment, forexample, air treatment system.Possibility of forming different zones of placement ofcompressors, control of each of them.Remote control and maintenance of pressure balance in theautomatic mode.Remote extension of input/output for regulating the operation ofthe auxiliary equipment.Technology of automation of the virtual relay.Possibility of adding the reserve pressure sensor. It increases thesystem reliability, regulation of pressure difference at aircleaning, connection of the sensor-flowmeter.
Das EnergAir Metacentre ist ein Mikroprozessorensystem,welches darauf spezialisiert ist, bis zu 24 Kompressoren einesPneumatik-Systems an unterschiedlichen Standorten zuverwalten. Es übernimmt die Kontrolle und Verwaltungsämtlicher Parameter des Pneumatiknetzwerkes.Die Hauptmöglichkeiten vom EnergAir Metacentre:
Anschluss, Verwaltung und Regulierung von 2 bis zu 24Schraubenkompressoren beliebiger Modelle;die Aufrechterhaltung eines ständigen Drucks imDruckluftnetz mit einer Genauigkeit von bis zu 0,2 bar;es ist möglich, die Kompressoren in bis zu 6 Gruppenzusammenzufassen und in unterschiedlichen Varianten zubetreiben;die Möglichkeit der Verwaltung von Nebenanlagen, zumBeispiel von Druckluft- Aufbereitungssystemen;über die eingebaute Echtzeituhr lassen sichPlanungsaufgaben leichter verwirklichen;kostengünstige Regulierung des Elektroenergieverbrauchsdurch moderne und wirksame Kontrollsysteme;intelligentes Kontrollsystem zur Aufrechterhaltung desDrucks im System;Möglichkeit der Bildung verschiedener Zonen-Anordnungender Kompressoren, sowie die Verwaltung und die Kontrolle
jeder Zone;Fernüberwachung und die Aufrechterhaltung des Drucks imautomatischen Betrieb;Automatisierungsaufgaben über virtuelle Relais;Fernsteuerung zusätzlicher Ausstattungsmerkmale desKompressors;Anschlussmöglichkeiten zusätzlicher Sensoren zurErhöhung der Zuverlässigkeit des Systems, u.a.Regulierung des Druckunterschiedes bei der Luftreinigung,sowie die Möglichkeit einen Mengendurchfluss-sensoranzuschließen.
DOTECH FX32A
Multi-functional controller is designed to control air compressorsBK5T-BK15T. It displays information by using three digital indicatorsand additional characters.
MAIN FEATURES OF THE CONTROLLER DOTECH FX32A:Status indication compressor idle / load, the need formaintenance alarms.Digital display of pressure, temperature, oil-air mixture and thetotal operating time.Non-volatile memory for storing operating data: operating time,counter values and system states.
Alarm messages: warning about stopping the compressor; failureof the pressure sensor, temperature sensor; The lack of onephase or incorrect phasing, motor overload; higher pressure thanthe maximum specified pressure; the temperature of the oil-airmixture above 100 ° C and below 5 °C.
Der Multi-Funktions-Controller wurde entwickelt, um Schrauben-kompressoren BK5T-BK15T zu steuern.Die Anzeige der Informationen erfolgt unter Verwendung von dreiDigitalanzeigen und zusätzlichen Sonderzeichen.Hauptmerkmale des Control lers Dotech FX32A:
Statusanzeige Last- und Leerlauf des Kompressors, Wartungs-anzeigeDigitale Anzeige des Drucks, der Temperatur, des Öl-Luft-Ge-mischs und der Betriebsstunden.Betriebsstunden, Zählerwerte und Systemzustände werdenlangfristig gespeichert.Alarmmeldungen: Kompressorstop, Ausfall von Drucksensoroder Temperatursensor, fehlende Phase oder falsche Phasen-folge, Motorüberlastung, Überdruck, Über- oder Untertempera-tur des Luft-/Ölgemisches (100/ 5 °C)
17 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
18/32
В
C
А
G
АВ
C
G
АG
C
В
Top View
4,0 kW 5,5 kW 7,5 kW
4,0 kW
5,5 kW 7,5 kW
BK5-8(10,15)-500D
BK7-8(10,15)-500D
BK10-8(10,15)-500D
kW
4,0
5,5
7,5
bar
8/10/15
8/10/15
8/10/15
kg
405
450
460
G1/2”
G1/2”
G1/2”
A× B × C, mm
2030 × 695 × 1585
2030 × 695 × 1585
2030 × 695 × 1585
l/min
550/450/270
800/700/500
1150/1000/700
dB
68
70
71
Lt
500
500
500
BK5-8(10,15)-270
BK7-8(10,15)-270
BK10-8(10,15)-270
kW
4,0
5,5
7,5
bar
8/10/15
8/10/15
8/10/15
kg
305
340
345
G3/4”
G3/4”
G3/4”
A× B × C, mm
1270 × 680 × 1585
1270 × 680 × 1585
1270 × 680 × 1585
l/min
550/450/270
800/700/500
1150/1000/700
dB
68
70
71
Lt
270
270
270
MODEL /Typ
MODEL /Typ
MODEL /Typ
BK5-8(10,15)
BK7-8(10,15)BK10-8(10,15)
kW
4,0
5,57,5
bar
8/10/15
8/10/158/10/15
kg
200
215225
G3/4”
G3/4”G3/4”
OutputAnschluß
A× B × C, mm
Dimensions Abmessungen
890 × 680 × 1025
890 × 680 × 1025890 × 680 × 1025
l/min
550/450/270
800/700/5001150/1000/700
dB
68
7071
G
OutputAnschluß
Dimensions Abmessungen
G
OutputAnschluß
Dimensions Abmessungen G
4,0 kW 5,5 kW
7,5 kW
Relais control system.Operating mode: loading/stop
SCREW COMPRESSORS WITH BELT DRIVESCHRAUBENKOMPRESSORENMIT RIEMENANTRIEB
Relaisgesteuert. Betriebsart: Ein/Aus.
18 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
19/32
SCREW COMPRESSORS WITH BELT DRIVESCHRAUBENKOMPRESSORENMIT RIEMENANTRIEBControl panel with microprocessor system.Operating mode: loading/ idle mode/ stop
Mikroprozessorsteuersystem.Betriebsart: Ein / Aus / Leerlauf
MODEL / Typ
BK5E-8(10,15)
BK7E-8(10,15)
BK10E-8(10,15)
kW
4,0
5,5
7,5
bar
8/10/15
8/10/15
8/10/15
kg
200
215
225
G3/4”
G3/4”
G3/4”
A× B × C, mm
890 × 680 × 1025
890 × 680 × 1025
890 × 680 × 1025
l/min
550/450/270
800/700/500
1150/1000/700
dB
68
70
71
BK15E-8(10,15)(BC) 11,08/10/15 280 G3/4”1080 × 680 × 10251650/1400/1100 75
BK20E-8(10,15)(BC) 15,08/10/15 335 G3/4”1080 × 680 × 10252150/1900/1400 77
MODEL / Typ
BK5E-8(10,15)-270
BK7E-8(10,15)-270
BK10E-8(10,15)-270
kW
4,0
5,5
7,5
kg
305
340
345
G3/4”
G3/4”
G3/4”
A× B × C, mm
1270 × 680 × 1585
1270 × 680 × 1585
1270 × 680 × 1585
l/min
550/450/270
800/700/500
1150/1000/700
dB
68
70
71
BK15E-8(10,15)-500(BC) 11,0 475 G3/4”2030 × 680 × 15851650/1400/1100 75
BK20E-8(10,15)-500(BC) 15,0
bar
8/10/15
8/10/15
8/10/15
8/10/15
8/10/15
Lt
270
270
270
500
500 520 G3/4”2030 × 680 × 15852150/1900/1400 77
MODEL / Typ
BK5E-8(10,15)-500D
BK7E-8(10,15)-500D
BK10E-8(10,15)-500D
kW
4,0
5,5
7,5
kg
405
450
460
G1/2”
G1/2”
G1/2”
A× B × C, mm
2030 × 695 × 1585
2030 × 695 × 1585
2030 × 695 × 1585
l/min
550/450/270
800/700/500
1150/1000/700
dB
68
70
71
BK15E-8(10,15)-500D(BC) 11,0 505 G3/4”2030 × 750 × 15851650/1400/1100 75
BK20E-8(10,15)-500D(BC) 15,0
bar
8/10/15
8/10/15
8/10/15
8/10/15
8/10/15
Lt
500
500
500
500
500 575 G3/4”2030 × 750 × 15852150/1900/1400 77
4,0 kW 5,5 kW 7,5 kW
11,0 kW 15,0 kW
4,0 kW 5,5 kW 7,5 kW
11,0 kW 15,0 kW
4,0 kW
5,5 kW 7,5 kW
11,0 kW 15,0 kW
В
C
А
G
AB
C
G
AG
C
BTop View
Dimensions Abmessungen
OutputAnschluß
Dimensions Abmessungen
OutputAnschluß
G
G
Dimensions Abmessungen
OutputAnschluß
G
19 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
20/32
4,0 kW 5,5 kW 7,5 kW
4,0 kW
NEW
NEW
5,5 kW 7,5 kW
11,0 kW 15,0 kW
11,0 kW 15,0 kW
4,0 kW NEW
5,5 kW 7,5 kW
11,0 kW 15,0 kW
MODEL /Typ
BK5T-8(10/15)-270ДBK7T-8(10/15)-270Д
BK10T-10(15)-270Д
kW
4,05,5
7,5
bar
8/10/158/10/15
10/15
kg
350350
380
G1/2G1/2
G1/2
A× B × C, mm
1650 × 680 × 15001650 × 680 × 1500
1650 × 680 × 1500
l/min
550/450/270800/700/500
1000/700
dB
6870
71
Lt
270270
270
BK15T-8(10/15)-500Д 11,08/10/15 505 G3/42015 × 680 × 15851650/1400/1100 75500
BK20T-8(10/15)-500Д 15,08/10/15 575 G3/42015 × 680 × 15852150/1900/1400 77500
MODEL /Typ
BK5T-8(10/15)- 270
BK7T-8(10/15)-270
BK10T-10(15)-270
kW
4,0
5,5
7,5
bar
8/10/15
8/10/15
10/15
kg
320
320
345
G3/4
G3/4
G3/4
A× B × C, mm
1650 × 680 × 1500
1650 × 680 × 1500
1650 × 680 × 1500
l/min
550/450/270
800/700/500
1000/700
dB
68
70
71
Lt
270
270
270
BK15T-8(10/15)-500 11,08/10/15 475 G3/42015 × 680 × 15851650/1400/1100 75500
BK20T-8(10/15)-500 15,08/10/15 520 G3/42015 × 680 × 15852150/1900/1400 77500
MODEL /Typ
BK5Т-8(10/15)
BK7T-8(10/15)
BK10T-10(15)
kW
4,0
5,5
7,5
bar
8/10/15
8/10/15
10/15
kg
205
215
225
G3/4
G3/4
G3/4
A× B × C, mm
890 × 680 × 1025
890 × 680 × 1025
890 × 680 × 1025
l/min
550/450/270
800/700/500
1000/700
dB
68
70
71
BK15T-8(10/15) 11,08/10/15 280 G3/41080 × 680 × 10251650/1400/1100 75
BK20T-8(10/15) 15,08/10/15 335 G3/41080 × 680 × 10252150/1900/1400 77
C
В А
G
А
C
G
В
А
G
C
В
Top View / Draufsicht
OutputAnschluß
Dimensions Abmessungen
G
OutputAnschluß
Dimensions Abmessungen
G
OutputAnschluß
Dimensions Abmessungen
G
SCREW COMPRESSORS WITH BELT DRIVESCHRAUBENKOMPRESSORENMIT RIEMENANTRIEBSPECIAL EDITION.Control panel with microprocessor system.Controller Dotech FX32A.Operating mode: loading/ idle mode/ stop.New Dryers series SL.
SONDERSERIE.Mikroprozessorsteuersystem.Controller Dotech FX32A.Betriebsart: Ein / Aus / Leerlauf.Luftentfeuchter neue Serie SL.
20 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
21/32
SCREW COMPRESSORSOPEN TYPE WITH DIRECT DRIVE
SCHRAUBENKOMPRESSORENMIT DIREKTANTRIEB
SCREW COMPRESSORSOPEN TYPE WITH BELT DRIVE
SCHRAUBENKOMPRESSORENMIT RIEMENANTRIEB
SCREW COMPRESSORS WITH BELT DRIVE
SCHRAUBENKOMPRESSORENMIT RIEMENANTRIEB
NEW 2,2 kW 3,0 kW
11,0 kW 15,0 kW
15,0 kW 18,5 kW
22,0 kW
MODEL /Typ
BK20-8(10/15)
BK25-8(10/15)
BK30-8(10/15)
kW
15,0
18,5
22,0
bar
8/10/15
8/10/15
8/10/15
kg
560
570
630
A× B × C, mm
1235 × 1130 × 1500
1235 × 1130 × 1500
1235 × 1130 × 1500
l/min
250/2200/1650
3000/2700/2100
3500/3200/2500
dB
65
67
69
OutputAnschluß
Dimensions Abmessungen
G
MODEL /Typ
BK3A-7,5- 200-1(2)
BK4A-10- 200-1(2)
kW
2,2
3,0
bar
7,5
10
kg
130
135
G1/2
G1/2
A× B × C, mm
1550 × 570 × 1100
1550 × 570 × 1100
l/min
315
315
dB
73
73
Lt
200
200
OutputAnschluß
Dimensions Abmessungen
G
MODEL /Typ
BK15A-10(15)-500
BK20A-10(15)-500
kW
11,0
15,0
bar
10/15
10/15
kg
390
445
G3/4
G3/4
A× B × C, mm
2030 × 690 × 1450
2030 × 690 × 1450
l/min
1400/1100
1900/1400
dB
80
80
Lt
500
500
OutputAnschluß
Dimensions Abmessungen
G
G11/4G11/4G11/4
Additional option: D – integrated refrigeration air dryer, BC – frequency converter.Ausführungen: D – mit Kältetrockner, WS – mit Frequenzumrichter
А
G C
В
А
G
C
В
A
C
B
37
G
21 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
22/32
SCREW COMPRESSORS WITH BELT DRIVE
SCHRAUBENKOMPRESSORENMIT RIEMENANTRIEB
30,0 kW 37,0 kW
45,0 kW 55,0 kW
75,0 kW
MODEL /Typ
BK40-8(10/13/15)
kW
30,0
bar
8/10/13/15
kg
800
A× B × C, mm
1235 × 1260 × 1500
l/min
5200/4800/4000/3600
dB
75
OutputAnschluß
Dimensions Abmessungen
G
G11/4BK50-8(10/13/15) 37,08/10/13/15 765 1235 × 1260 × 15006000/5200/4500/4200 75 G1 1/4
MODEL /Typ
BK100E-8(10/13)
kW
75,0
bar
8/10/13
kg
1550
A× B × C, mm
1850 × 1300 × 1900
l/min
12800/11100/10000
dB
80
OutputAnschluß
Dimensions Abmessungen
G
G11/2
MODEL /Typ
BK60E-8(10/13/15)
kW
45,0
bar
8/10/13/15
kg
1000
A× B × C, mm
1600 × 1150 × 1650
l/min
7200/6500/5600/5100
dB
80
BK75E-8(10/13/15) 55,08/10/13/15 1080 1600 × 1150 × 16508500/7700/6700/6000 80
OutputAnschluß
Dimensions Abmessungen
G
G11/2G11/2
C
A B
G
С
2 6 0
270В
320
А
~400 V
7 3 5
Right View Rear Sei tenansicht Rückans icht
A
C
B
37
G
22 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
23/32
1 8 2 5
1 2 0
870 170
3015*32550*2
2615*12150*
1360* *21590 (1680)*1 *3
622*1 *3158* *2
237* *2
~380B
250 Top View / Draufsicht:
1 2 2
5 *
1 *
3
1 5 1
5 *
1 *
2
2 5 2
MODEL / Typ bar kW
kg
dB
Output
Anschlußbasic option D option BC option DBC
BK40Р-8 (D, ВС, DВС)
Additional option:D – integrated refrigeration air dryer.BC – frequency converter.K – integrated heat recuperation of thermal energy.
Pressure from 5 to 15 bar is possible on special requests.
Ausführungen: D – mit Kältetrockner BC – mit Frequenzumrichter
Auf An frage i st eine Aus legung der Kompressorenfür einen Druck von 5 bis 15 bar möglich.
* – basic; *1 – option D; *2 – option BC; *3 – option DBC. Size in brackets for BK100P and BK120.
30,08,0 1 1/2”71 1100
1100
1430
1380
1560
1500
1980
1980
2050
1250 1130 1280
1250 1130 1280
1640 1580 1790
1590 1580 1790
1790 1760 1960
1730 1690 1900
2200 2130 2440
2200 2130 2440
2300 2320 2570
ВК50Р-7,5 (D, ВС, DВС) 37,07,5 1 1/2”72
ВК60Р-7,5 (D, ВС, DВС)
ВК60Р-8 (D, ВС, DВС)
ВК75Р-7,5 (D, ВС, DВС)
ВК75Р-8 (D, ВС, DВС)
ВК100Р-7,5 (D, ВС, DВС)
ВК100Р-8 (D, ВС, DВС)
ВК120-8 (D, ВС, DВС)
45,0
45,0
55,0
55,0
75,0
75,0
90,0
7,5
8,0
7,5
8,0
7,5
8,0
8,0
11/2”
11/2”
11/2”
11/2”
2”
2”
2”
9500
l/min
5800
7100
8600
7500
10100
14500
13200
16000
74
75
75
77
77
77
77
* – ; *1 – ; *2 – ; *3 – .
SCREW COMPRESSORS WITH DIRECT DRIVE
SCHRAUBENKOMPRESSORENMIT DIREKTANTRIEB
30,0 kW 37,0 kW 45,0 kW 55,0 kW 75,0 kW 90,0 kW
23 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
24/32
SCREW COMPRESSORS WITH DIRECT DRIVESCHRAUBENKOMPRESSORENMIT DIREKTANTRIEB 110,0 kW
132,0 kW
160,0 kW 200,0 kW
4 × 18
4 5 °
145
180 76
Output flange / Ausgangsflansch der Druckluft
Top View / Draufsicht
4 5 °800
1900
2 2 9 0
2 3 8 0 *
985
190
1 0 0
2650
1 8 0
2 1 1 0
380В
6 0
. . . 7
0
* – Size for ВК150-ВК220.*1 – Size for ВК270.
MODEL / Typ
ВК150-8 (ВС)
Additional option: BC – frequency converter; K – integrated heat recuperation of thermal energy.Pressure from 5 to 15 bar is possible on special request.
Ausfüh rungen: BC – mit Frequenzumrichter
Auf An frage i st eine Aus legung der Kompressorenfür einen Druck von 5 bis 15 bar möglic h.
basic
2700
3300
3450
3950
ВС
2900
3450
3600
4100
Flange 1-65-16
OutputAnschluß
Flange 1-65-16
Flange 1-65-16
Flange 1-65-16
ВК180-8 (ВС)
ВК220-8 (ВС)
ВК270-8 (ВС)
kW
110,0
132,0
160,0
200,0
l/min
19000
23200
26000
34000
dB
78
78
4500 4700 Flange 1-65-16ВК220-7,5 (ВС) 160,0
bar
8,0
8,0
8,0
8,0
7,5 30200 80
79
80
kg
* – . Abmessungen .
24 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
25/32
SCREW COMPRESSORS WITH DIRECT DRIVE
SCHRAUBENKOMPRESSORENMIT DIREKTANTRIEB 250,0 kW
315,0 kW
MODEL / Typ
Additional option: H – «Soft start» – a basic option; BC – frequency converter; K – integrated heat recuperation of thermal energy.Pressure from 5 to 15 bar is possible on special request.
Ausfüh rungen: H – «Soft start» – Grundversion; BC – mit Frequenzumrichter
Auf An frage i st eine Aus legung der Kompressoren für einen Druck von 5 bis 15 bar möglich.
basic
5300
5300
ВС
5500
5600
Output Anschluß
Flange 1-80-16
Flange 1-80-16
ВК340H-7.5 (ВС)
ВК430H-7.5 (ВС)
kW
250,0
315,0
bar
7,5
7,5
l/min
44000
51600
dB
80
80
kg
A
A
2 2 5 5
20264160
12301365
1040
2 0 5 5
4 5 °
145
180 76
Output flange /
4 5 °
4 × 18
25 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
26/32
OIL-FREE LOW-PRESSURE AIR-COOLEDSCREW COMPRESSORS OF SERIES BK OLFREIE NIEDERDRUCK SCHRAUBEN-KOMPRESSOREN DER SERIE ВК
BASIC PACKAGING ARRANGEMENT:oil free screw airend;electric motor;Inlet air filter of cyclonic type;sound damper with a safety valve and outlet fitting;system of control, protection and management; vibration- isolating bearings for the power block;sound insulation house;it is assembled on a base frame, when assembled nospecial foundation is required.
Basisausstattung:Schraubenblock (GHH-Rand Deutschland);Elektromotor (Siemens Deutschland);Luftfilter;Schalldämpfer, Sicherheitsventil, Anschlußarmatur;Kontroll- und Schutzsysteme,Vibrationsdämpfer;Lärmdämmende Verkleidung;Fertig auf einem Rahmen montiert;Bei der Aufstellung ist kein spezielles Fundamenterforderlich.
Schallpegel: 80 dB Ausführungen:
Zucker und Kunststoffgranulat)
Noise level: 80 dBOptions: A – open type compressor (without noise insulation house)O – with air cooler (for transportation of sugar and granules of polymer materials)
1,5 barMODELTyp
MODELTyp
MODELTyp
ВК30-1,5
ВК40-1,5
ВК50-1,5
ВК60-1,5
kW kg
93022,0455
99030,0575
101037,0730
107045,01000
m3/h
2,0 bar
ВК40-2,0
ВК50-2,0
ВК60-2,0
ВК75-2,0
kW kg
99030,0438
101037,0557
107045,0717
116055,0989
m3/h
2,5 bar
ВК40-2,5
ВК50-2,5
ВК60-2,5
ВК100-2,5
kW kg
93030,0421
101037,0539
107045,0704
128075,0976
m3/h
1800
1100
1 1 7 0 ( 1 3 5 0 )
170 170
788 6 5
6 5
..
Die ölfreien Niederdruck Schraubenkompressoren sind für einen Druck von bis zu 2,5 bar ausgelegt.
One-stage oil-free low pressure screw compressor. It is designed for air compression up to 2.5 bar which is used in pneumatic transport systems for transportation of bulk solids (flour, sugar, granules ofpolymer and chemical materials, cement, etc.)
26 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
27/32
ROTARY SCREW COMPRESSORINSTALLATIONS WITH DEUTZ DIESEL ENGINES
SCHRAUBENKOMPRESSORSTATIONENMIT DEUTZ DIESELMOTOREN
Diesel-engine rotary screw compressors by Remezaare designed for generating compressed air forsupplying air-operated tools, drives and machinery with compressed air.
In their standard version, the installations are designedto operate at ambient temperatures from -15 to +45°C,and special versions from -35 to +45°C (option T).
Diesel-Schraubenkompressorstationen vonRemeza sind für die Druckluftversorgung vonpneumatischen Werkzeugen, Antrieben und sonsti-gen Druckluftverbrauchern bestimmt.In der Standardausführung sind die Stationen fürden Betrieb bei Umgebungstemperaturen von -15bis + 45 ºC ausgelegt. In der Sonderausführung -von -35 bis + 45 ºC (Option T).
AIR END, COMPANY «ROTORCOMP», GERMANY
High reliability.Low maintenance.Operating pressure 7to 15 bar.
SCHRAUBENBLOCK VON«ROTORCOMP» (DEUTSCHLAND)
Hohe ZuverlässigkeitWartungsarmBetriebsdruck von 7 bis 15 bar
DIESEL ENGINES,COMPANY «DEUTZ»,GERMANY
Service schedules increased,maintenance every 500operating hours.Low fuel consumption.No coolant for diesel engine,cooling with oil cooler.24 months warranty. 15000
hours overhaul life. Worldwide service network,field service provided. Servicecentres on www.deutz.de,«Partner» section.
DIESELMOTOR VON«DEUTZ» (DEUTSCHLAND)
Vergrößerte Serviceintervalle, Wartungnach 500 BetriebsstundenGeringer BrennstoffverbrauchKein Kühlmittel. Die Motorkühlungerfolgt durch einen Ölkühler 24 Monate Garantieerste Überholung nach – 15 000
BetriebsstundenWeltweites Servicenetz mitKundendienst nach dem Verkauf.Liste mit den Dienstleistungszentrenfinden Sie auf www.deutz.de in derAbteilung «Händler».
27 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
28/32
MICROPROCESSORCONTROL SYSTEM
Indication of operation modes,operating hour meter, accumulatorcharge, start-up signal.Protection and engine emergencyshutdown including:• generator break-down (beltabruption);• air filter contamination;• low oil pressure of engine oil;• overheated compressor or engineoil;• fuel filter contaminated and low fuellevel in tank.
MIKROPROZESSOR-STEUERSYSTEM
Anzeige des Betriebszustands, derBetriebsdauer (Stundenzähler), derAkkuladung und Startfreigabe.Motorschutz und Notabschaltung desMotors bei:• Generatorausfall (Riemenriss);• Luftfilterverschmutzung;• zu niedriger Druck des Motoröls;• erhöhte Öltemperatur des Motors oder desKompressors;• Brennstofffilter-Verschmutzung undniedriger Ölstand im Behälter.
А
B C
MODEL / Typ
Air flow, m3/minLiefermenge, m3/min
Operating pressure, barBetriebsüberdruck, bar Compressor oil system capacity, literÖlsysteminhalt des Kompressors, Liter Quantity and size of connections, pcsDruckluftabnahmestellen, St.EngineMotor Number of Cylinders, pcs Anzahl Zylinder, pcs
Nominal power, kWNennleistung, kWCooling systemKühlungssystemOil system capacity, literÖlsysteminhalt, Liter Fuel at full power, l/hourBrennstoffverbrauch bei Maximalleistung, l/hOil tank capacity, literKraftstofftank, Liter External dimensions of compressor on wheels withadjustable drawbar A × B × C, mm (weight, kg)
External dimensions on frame
A ×
B ×
C, mm (weight, kg)
Stationsabmessungen auf Chassis mitDeichsel A × B × C, mm (Gewicht, kg)
Stationsabmessungen auf StützenA × B × C, mm (Gewicht, kg)
DК-3/7D
2900 × 1450 × 1260(750)
DК-3/15D
3430 × 1480 × 1280(920)
DК-4/10D
3430 × 1480 × 1280(920)
13 18 18 18
2 × 3/4” 2 × 3/4”+1 × 1” 2 × 3/4”+1 × 1” 2 × 3/4”+1 × 1”
3 3 4 5,4
DК-5/7D
7 15 10 7
DEUTZ DEUTZ DEUTZ DEUTZ
2 3 3 3
23,3 36,0 36,0 36,0
oil oil oil oil
8 11 11 11
5,2 8,0 8,0 8,0
45 75 75 75
3430 × 1480 × 1280(920)
1580 × 1270 × 1020(670) 2050 × 1300 × 1040(840) 2050
× 1300 × 1040(840) 2050 × 1300 × 1040(840)
28 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
29/32
MODULAR COMPRESSOR INSTALLATIONS
MODULARE KOMPRESSORSTATIONEN
Highly economical modular rotary screwcompressor installations MKR series –ready for use solution for providingcompressed air in difficult areas ineconomic ways.
Schraubenkompresoren der MKR- Serie sinddurch ihre Modul- Bauweise sehr mobil.Sie bieten eine gute Lösung zur wirtschaftli-chen Druckluftversorgung an schwer zugänglichen Orten
FREE COMPLETE SET OF MODULARINSTALLATION PROVIDES:
Compressor equipment withthe required performance and,pressure up to 35 bar.System for preparation of compressedair with required purification level and dew pointGas separation systemHeating and ventilation systemsSystems for automatic warning and fire-fighting Automatic systems for controlling the installedequipment
Die Modulstation kann mit folgenden freiwählbaren System ausgestattet werden:
Kompressoren mit der erforderlichenLeistung und einem Druck bis zu 35 bar Druckluftaufbereitungssystem mit dem vom Verbraucher gewünschten Reinheitsgrad und DrucktaupunktGasseparationssystemHeizungs- und Lüftungssystem
Automatisches Meldesystem und Feuerlöschanlage Automatische Systeme zur Steuerung der installiertenKomponenten.
Modular compressor installations based on 20- and40-feet railway container, naval version, compared withinstallations in permanent structures, provide significanteconomy in resources and time, construction expensesexcluded. If compared with installations based onhouse-type, these are mostly equipped having higherprotection and high automated control levels.
The installations have the standard operation tempera-ture range from -40 to +40°C.
Der Einsatz von modularen Kompressorstationen aufBasis von 20 und 40 Fuß Containern ermöglicht eineschnelle und kostensparende Alternative zu fest inGebäuden installierten Kompressoranlagen.Sie sind leicht zu transportieren und bieten eine erhöhteSicherheit durch ihre komplette Ausstattung mit hohem
Automatisierungsgrad.
Die Stationen sind für eine Umgebungstemperatur von-40 bis +40 ºC ausgelegt.
29 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
30/32
CUSTOMER RECEIVES THE MODULARCOMPRESSOR INSTALLATION ENTIRELY COMPLETED AND READY TO OPERATE,MAINTENANCE DOCUMENTATION PROVIDED
DIE MODULARE KOMPRESSORSTATION WIRD
EINSATZBEREIT UND MIT ALLENBETRIEBSUNTERLAGEN GELIEFERT
The installation is equipped with general switch-board fittedwith power distribution, control, alarm and remote operationsystems. Option for automatic switch of ACB (automatic circuitbreaker, for 1st class of power supply) providing no-breakpower.
The installation is operated both directly and remote controlled.
The modern electronic operation system optimises opera-tion of the modular compressor installation reducing energyconsumption for generating compressed air.
During winter, power is saved through usage of heat fromoperating compressors; at stand-by mode the installation isheated by fan heaters.
Systems for heating, ventilation with air conditioning(heating and operation of input-extract shutters with air flowthrough straining cloths), lighting, fire-fighting and fire alarmallow location in open areas.
Compressor installations and equipment for drying andpurification of compressed air are manufactured with units
from the world’s top suppliers according to European qualitystandards, most space-efficient and rational ways of settingare applied for highest efficiency and best maintenance.
If technologically required by customer, modular compres-sor installations can be fitted with:
– compressor equipment – up to 1023/min (730 kW) ; – drying equipment: refrigeration-type with dew point +3°C,absorption-type with dew point from-20 to-70°C,hybrid-type with option for dew point +3°C or-40°C; – Ecotec Converters for providing oilfree air; – Air tanks and condensate drains; – systems for filtering of condensate from oil and other
particles.Design solutions provide location of compressor equipmentin noise insulation house and in open version for efficientplacing of equipment with high capacity, saving of space andresources.
Die Station verfügt über einen Schaltschrank, in demLastverteilungs-, Kontrollsystem, Signalanlagen und Fernbe-dienungssystem untergebracht sind.
Die Kompressorstation kann sowohl von innen als auchfern gesteuert werden.
Die moderne elektronische Steuerung ermöglicht eine
Optimierung des Betriebs und ermöglicht Energieeinsparun-gen bei der Erzeugung von Druckluft.In der Winterzeit wird eine Energieeinsparung durch die
Nutzung der Kompressorabwärme erreicht. Im Standby-Modus wird die Anlage mit Heizlüftern beheizt.
Die Heizanlagen, Belüftungssysteme mit KlimaautomatikBeleuchtungssystem, Feuerlöschanlagen und Feuermelde-systeme ermöglichen, die Station auf offenem Gelände zubetreiben.
Die Kompressoranlagen und Trocknungs- und Reinigungs-anlagen, die von den besten Herstellern nach europäischenQualitätsnormen hergestellt werden, werden kompakt und
rational aufgestellt, um eine optimale Leistung undBedienungsfreundlichkeit zu erreichen.Die Ausstattung der modularen Kompressorstation erfolgt
je nach Kundenwunsch mit:– Kompressoranlage– bis zu 102 m3/min (730 kW);– Druckluft-Trockneranlagen: Kältetrockner mit einemDrucktaupunkt von +3 ºC, Adsorptionstrockner mit einemDrucktaupunkt von -20 bis -70 ºC, Hybridanlagen mit derWahl des Taupunkts +3 ºC oder - 40 ºC;– Filtern mit Filtrationsgrad 0,01 Mikrometer und Restöl-gehalt 0,0008 mg/m3;– EcoTec-Convertern für die Erzeugung von ölfreier Luft;–
Druckbehältern und Kondensatableitern;– Reinigungssystemen für Öl und Schmutzpartikeln.Die individuellen Konstruktionslösungen ermöglichen die
Montage der Kompressoranlage sowohl im schalldämmen-den Gehäuse, als auch in der offenen Ausführung.
30 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
31/32
EXAMPLES OF BLOCK SCHEMESOF MODULAR COMPRESSOR STATIONS AUFBAU EINER MODULARENKOMPRESSORSTATION (BEISPIEL)
Modular screw compressor stations also available with the installation of nitrogen and oxygen generators.
Die Kompressor-Serie MKP auch mit Einbau von Stickstoff- und Sauerstoffgeneratoren erh ältlich.
Inlet Jalousie Air compressor BK 100P-10
Air dryer RED-220Board distributive
Cable gland
Fan heater
Filter QF-0125
Fire extinguisher Automatic fireextinguishing system
Automatic fireextinguishing system
illuminationLamps Door Door Inlet Jalousie
Fireextinguisher
Outlet Jalousie
Fan heater
BypassJalousie
Filter PF-0125 Filter HF-0125
Ventilating jalousieCompressor block
Heat-exchanger block
Electric case Cable gland
Compressed air outlet G1 1/2 line 2 (without preparation) Air compressor BK75P-8A
line 2 (reserve)
Air compressor BK75P-8A
Filter R311-H3 Cable gland Compressed air outlet G1 1/2
OutletJalousie
BypassJalousie
InletJalousie
line 1(with preparation)Electric caseSistem ABP Filter R311-S3
Filter R311-P3
Filter R311-P3 Air compressor BK75P-8A
line 1Exhaust fan
Air dryer RED-183Cable gland for condensate
Outlet of warm air Outlet of warm air
Inlet of cooling air Inlet of cooling air Automatic fireextinguishing system Door
illumination
31 ADVANCED TECHNOLOGY IN THE FIELD OF COMPRESSED AIR| FORTSCHRITTLICHE DRUCKLUFT-TECHNOLOGIE| WWW.REMEZA.COM
-
8/18/2019 Каталог Remeza_2015 Ганновер 2015.pdf
32/32
top related