0065-c336-08 rev k 09040065-c336-o8 rev k po box 151 webb city, mo 64870 printed in usa 09/04 ph...
Post on 26-Jan-2021
1 Views
Preview:
TRANSCRIPT
-
� From transport position, lay scale on floor.
DO NOT remove the Storage Pin or operate Column Release Lever prior to this operation.
DO NOT USE SCALE ON CARPETED FLOORS!
� Remove the Storage Pin.
� Slide the Column Release Lever to release column and lift to full up-right and locked position.
Operating Instructions for Electronic Wheelchair Scale
Caution! Load Cell damage can occur if scale is allowed to fall from storage position.
Storage Pin
Column Release Lever
DO NOT DROP!
Raise and Lock
-
� Press the ON key located on front of the indicator.
� When the indicator reads Zero, press the TARE key, enter the wheelchair weight, then press the ENTER key. The indicator will show a negative weight equal to the weight of wheelchair.
� For storage, use column release to release column and fold down to locked position. Replace storage pin (see warning label on scale base). Store in an up-right position, preferably near a wall for maximum protection against damage.
� Position patient on scale by pulling wheelchair onto scale. NEVER PUSH patient on or off scale. Lock wheelchair wheels.
� When weight reading is steady, read the patient’s weight.
Remove patient from scale by backing down the ramp.
HINT: If indicator is on when storing, press the ZERO key to zero the indicator which activates the automatic shutoff.
Operating Instructions for Electronic Wheelchair Scale
CARDINAL SCALE MFG. CO. 0065-C336-O8 Rev K PO BOX 151 � WEBB CITY, MO 64870 Printed in USA 09/04 PH (417) 673-4631 � FAX (417) 673-5001 www.detectoscale.com
Direction of Travel
Correct Storage Position
-
� From transport position, lay scale on floor.
DO NOT remove the Storage Pin or operate Column Release Lever prior to this operation.
DO NOT USE SCALE ON CARPETED FLOORS!
� Remove the Storage Pin.
� Slide the Column Release Lever to release column and lift to full up-right and locked position.
Operating Instructions for Electronic Wheelchair Scale
Caution! Load Cell damage can occur if scale is allowed to fall from storage position.
Storage Pin
Column Release Lever
DO NOT DROP!
Raise and Lock
-
� Press the ON key located on front of the indicator.
� When the indicator reads Zero, press the TARE key, enter the wheelchair weight, then press the ENTER key. The indicator will show a negative weight equal to the weight of wheelchair.
� For storage, use column release to release column and fold down to locked position. Replace storage pin (see warning label on scale base). Store in an up-right position, preferably near a wall for maximum protection against damage.
� Position patient on scale by pulling wheelchair onto scale. NEVER PUSH patient on or off scale. Lock wheelchair wheels.
� When weight reading is steady, read the patient’s weight.
Remove patient from scale by backing down the ramp.
HINT: If indicator is on when storing, press the ZERO key to zero the indicator which activates the automatic shutoff.
Operating Instructions for Electronic Wheelchair Scale
CARDINAL SCALE MFG. CO. 0065-C336-O8 Rev K PO BOX 151 � WEBB CITY, MO 64870 Printed in USA 09/04 PH (417) 673-4631 � FAX (417) 673-5001 www.detectoscale.com
Direction of Travel
Correct Storage Position
top related