01 eig overview
Post on 21-Feb-2015
65 Views
Preview:
TRANSCRIPT
Europe India Gateway Europe India Gateway (EIG) Cable System, (EIG) Cable System,
Segment 4Segment 4
Tyco Telecommunications Training
Type B1Jan-Feb 2010Jeddah, KSA
System Overview Undersea Equipment and Land Cable Safety Guidelines System Maintenance Optical Principles / Transmission Properties Submarine Line Terminating Equipment (SLTE) SLTE Management – TEMS overview Line Monitoring Equipment (LME)
This overview provides a high-level description of the EIG Undersea Cable System, Segment 4.
Topics covered include the following:
overview of the system system configuration engineering design summary major system components
Module 1 -- System Overview
Geographic map EIGThe EIG Cable System is a high-speed, high-capacity fiber optic transmission system that connects landing points in Ras Sidr, Egypt South; Jeddah, Saudia Arabia; Haramous, Djibouti; Blue City, Oman; Mumbai, India; and Fujairah, United Arab Emirates (UAE).
Figure 1-1. Geographic Map Showing EIG Segments S4.1 through S4.9
Geographic map EIG
Figure 1-2. Geographic Map Showing EIG Segment S4.10
System ConfigurationThe base configuration for EIG consists of seven repeatered segments and three repeaterless segments connecting six cable stations: Ras Sidr, Egypt South; Jeddah, Saudi Arabia; Haramous, Djibouti; Blue City, Oman; Mumbai, India; and Fujairah, United Arab Emirates (UAE).
System Configuration
Zafarana
System Configuration
Segment End 1 End 2 L (km) Repeaters
S4.1 Egypt BU4A 1061 13
S4.2 Jeddah BU4A 70 0
S4.3 BU4A BU4B 42.9 0
S4.4 Jeddah BU4B 75.9 0
S4.5 BU4B BU4C 1259 17
S4.6 Djibouti BU4C 101.4 1
S4.7 BU4C BU4D 2354 30
S4.8 Blue City BU4D 985.9 12
S4.9 BU4D Mumbai 1097.5 13
S4.10 Blue City Fujairah 246 0
Total 7294 86
EIG Repeater Count
System ConfigurationFiber Pair Connectivity EIG contains FP1, FP2, FP3, and FP4 in each branching unit (BU) undersea segment.
Omnibus FPs are initially equipped with 26 wavelengths (24 working and 2 protection), operating at 10 Gb/s and yielding a capacity of 260 Gb/s.
Express FP is initially equipped with 28 wavelengths (26 working and 2 protection), operating at 10 Gb/s and yielding a capacity of 280 Gb/s.
Optical Add/Drop Multiplexer (OADM) FPs to Djibouti and Blue City, OADM express FP from Jeddah to Mumbai, and the additional express FP from Zafarana to Jeddah and Jeddah to Mumbai are initially unlit. All FPs are designed to support 136 wavelengths (128 working and 8 protection) operating at 10 Gb/s. Exceptions to this are the OADM branch FPs to Djibouti and Blue City, which are designed to support 13 wavelengths (12 working and 1 protection), operating at 10 Gb/s each.
EIG Oman-UAE Segment S4.10 contains three FPs in the undersea segment. One FP is initially equipped to support 9 wavelengths (8 working and 1 protection), operating at 10 Gb/s. The second and third FPs are initially unlit. All FPs are designed to support 102 wavelengths (96 working and 6 protection), operating at 10 Gb/s.
13x10
Jeddah52 λ
Egypt54 λ
FP3FP2FP1
26x10
28x10
S4.1
S4.4
S4.5
S4.6
S4.7
S4.8
S4.9
S4.10
S4.2
S4.3
BU4A BU4B BU4C BU4D
26x10 26x1026x1026x10 26x1026x10
28x10
26x10FP3FP2FP1
Mumbai54 λ
52 λDjibouti FujairahFP1
FP2FP3
FP1 FP2 FP2 FP1
Oman61 λ
FP1FP2FP3
FP1 FP4 FP2 FP3 FP3 FP2 FP4 FP1
PWF4C PWF4D
9x10 9x10
9 λ
13x10 13x1013x10
EIG System Configuration
Fiber Pair Connectivity
System ConfigurationFiber Pair Connectivity
BranchingUnit Name
Connecting Fiber Pairs
Fiber Pair Type
BU4A FP1 (S4.1) to FP1 (S4.3)
Non-OADM FP
BU4A FP2 (S4.1) to FP2 (S4.2)
Non-OADM FP
BU4A FP3 (S4.1) to FP1 (S4.2)
Non-OADM FP
BU4B FP1 (S4.3) to FP1 (S4.5)
Non-OADM FP
BU4B FP2 (S4.4) to FP2 (S4.5)
Jeddah to Mumbai Express
BU4B FP1 (S4.4) to FP1 (S4.5)
Non-OADM FP
BU4C FP1 (S4.3) to FP1 (S4.5)
Non-OADM FP
BU4C FP1 (S4.5) to FP1 (S4.6)
Non-OADM FP
BU4C FP2 (S4.5) to FP2 (S4.7)
Jeddah to Mumbai Express
BU4C FP2 (S4.5) to FP4 (S4.6)
Jeddah to Djibouti Add/Drop
BU4C FP2 (S4.6) to FP2 (S4.7)
Djibouti to Blue City Add/Drop
BU4C FP3 (S4.6) to FP3 (S4.7)
Non-OADM FP
BU4D FP1 (S4.7) to FP1 (S4.9)
Non-OADM FP
BU4D FP3 (S4.7) to FP3 (S4.8)
Non-OADM FP
BU4D FP2 (S4.7) to FP2 (S4.9)
Jeddah to Mumbai Express
BU4D FP3 (S4.7) to FP3 (S4.8)
Djibouti to Blue City Add/Drop
BU4D FP4 (S4.8) to FP2 (S4.9)
Blue City to Mumbai Add/Drop
BU4D FP1 (S4.8) to FP3 (S4.9)
Non-OADM FP
FP1 (S4.10) Non-OADM FP
FP2 (S4.10) Non-OADM FP
FP3 (S4.10) Non-OADM FP
BranchingUnit Name
Connecting Fiber Pairs Fiber Pair Type
System design summary
Attribute S4.1 S4.2 S4.3 S4.4 S4.5 S4.6 S4.7 S4.8 S4.9 S4.10
Initial Capacity Configuration
Installed fiber pairs 3 2 1 2 3 4 3 4 3 3
Equipped fiber pairs 2 1 1 1 2 2 2 2 2 1
Nominal operating line current (Amp) 1 0 1 0 1 1 1 1 1 0
Number of wavelengths per fiber pair (Omnibus)
26 26 26 26 26 26 26 26
Number of wavelengths per fiber pair (Express)
28 28 28 28 28 9
Line rate per fiber pair (Gb/s) 10 10 10 10 10 10 10 10 10 10
Capacity per fiber pair (Gb/s) (Omnibus)
260 260 260 260 260 260 260 260
Capacity per fiber pair (Gb/s) (Express)
280 280 280 280 280 90
Segment cross- sectional capacity
(Gb/s)540 260 280 260 540 520 540 520 540 90
EIG Cable System Engineering Summary
System design summary
Attribute S4.1 S4.2 S4.3 S4.4 S4.5 S4.6 S4.7 S4.8 S4.9 S4.10
Full Capacity Configuration
Equipped fiber pairs 3 2 1 2 3 4 3 4 3 3
Number of wavelengths per fiber pair(OADM)
13 13
Number of wavelengths per fiber pair(Omnibus)
136 136 136136 136 136 136 136 136 136 102102
Line rate per fiber pair (Gb/s) 10 10 10 10 10 10 10 10 10 10
Capacity per fiber pair (Gb/s) 1360 1360 13601360 1360 1360 1360 1360 1360 1360 10201020
Segment cross- sectional capacity
(Gb/s)4080 2720 1360 2720 4080 2980 4080 2980 4080 3060
EIG Cable System Engineering Summary
EIG System ConfigurationSTM-64
10 GbpsHPOE
10 GbpsHPOE
10 GbpsHPOE
10 GbpsHPOE
10 GbpsHPOE
10 GbpsHPOE
10 GbpsHPOE
10 GbpsHPOE
STM-64
STM-64
STM-64
STM-64
STM-64
STM-64
STM-64
WTE / D
CF W
TE /
DC
F
TLA TLA
CCE
PFE
TEMSTEMS-NMS
LME
Fiber Pair 1
CCE
PFE
TEMSTEMS-NMS
LME
EIG wavelength assignmentsEIG wavelength assignmentsWavelength Assignments For repeatered digital line segments, the transmission band contains three types of signals:
data channelsThe data channels (wavelengths) carry traffic at a nominal 10-Gb/s rate. Up to 96 data channels per fiber pair can be supported.
unassigned channelsWideband Initial Loading Equipment is employed for loading of the system to compensate for unused channels.
line monitoring system (LMS) channelsThe line monitoring equipment (LME) produces the LMS signals that are used to monitor the health of the optical path and to localize optical faults.
branching-unit control signalsThe command channel equipment (CCE) produces signals to control the branching units to alter the power configuration of the system.
EIG wavelength assignmentsEIG wavelength assignmentsInitial Optical Frequency Wavelength Allocations
Entry (channel slot) Number
Optical CenterFrequency (THz)
Center Wavelength(nm)
Initial LoadingData Channels
Digital Line Section 2 (Jeddah to Zafarana)
1 195.200 1535.822 LME1
112 192.375 1558.375 Data 26
113 192.350 1558.578 Data 25
114 192.325 1558.780 Data 24
115 192.300 1558.983 Data 23
116 192.275 1559.186 Data 22
117 192.250 1559.388 Data 21
118 192.225 1559.591 Data 20
119 192.200 1559.794 Data 19
120 192.175 1559.997 Data 18
121 192.150 1560.200 Data 17
122 192.125 1560.403 Data 16 Continued. . .
EIG wavelength assignmentsEIG wavelength assignmentsInitial Optical Frequency Wavelength Allocations (Cont’d)
Entry (channel slot) Number
Optical CenterFrequency (THz)
Center Wavelength(nm)
Initial LoadingData Channels
123 192.100 1560.606 Data 15
124 192.075 1560.809 Data 14
125 192.050 1561.012 Data 13
126 192.025 1561.216 Data 12
127 192.000 1561.419 Data 11
128 191.975 1561.622 Data 10
129 191.950 1561.826 Data 9
130 191.925 1562.029 Data 8
131 191.900 1562.233 Data 7
132 191.875 1562.436 Data 6
133 191.850 1562.640 Data 5
134 191.825 1562.843 Data 4
135 191.800 1563.047 Data 3
136 191.775 1563.251 Data 2
137 191.750 1563.455 Data 1
138 191.650 1564.270 LME2
EIG wavelength assignmentsEIG wavelength assignmentsInitial Optical Frequency Wavelength Allocations
Entry (channel slot) Number
Optical CenterFrequency (THz)
Center Wavelength(nm)
Initial LoadingData Channels
Digital Line Section 2 (Jeddah to Djibouti)
1 195.200 1535.822 LME1
112 192.375 1558.375 Data 26
113 192.350 1558.578 Data 25
114 192.325 1558.780 Data 24
115 192.300 1558.983 Data 23
116 192.275 1559.186 Data 22
117 192.250 1559.388 Data 21
118 192.225 1559.591 Data 20
119 192.200 1559.794 Data 19
120 192.175 1559.997 Data 18
121 192.150 1560.200 Data 17
122 192.125 1560.403 Data 16 Continued. . .
EIG wavelength assignmentsEIG wavelength assignmentsInitial Optical Frequency Wavelength Allocations (Cont’d)
Entry (channel slot) Number
Optical CenterFrequency (THz)
Center Wavelength(nm)
Initial LoadingData Channels
123 192.100 1560.606 Data 15
124 192.075 1560.809 Data 14
125 192.050 1561.012 Data 13
126 192.025 1561.216 Data 12
127 192.000 1561.419 Data 11
128 191.975 1561.622 Data 10
129 191.950 1561.826 Data 9
130 191.925 1562.029 Data 8
131 191.900 1562.233 Data 7
132 191.875 1562.436 Data 6
133 191.850 1562.640 Data 5
134 191.825 1562.843 Data 4
135 191.800 1563.047 Data 3
136 191.775 1563.251 Data 2
137 191.750 1563.455 Data 1
138 191.650 1564.270 LME2
EIG System Components
TEMS PFE DCD LME S200 ILE
Zafarina
EIG System Components
EIG System Components
EIG System Components
Undersea Equipment
Optical Fiber
Optical fibers provide the transmission paths for the system. These are high-strength, low-loss fibers designed to meet both mechanical and optical requirements for cable manufacture and in-service system performance.
The following types of optical fiber are used in the Tyco Telecommunications provided undersea and LXE-RL land cable of the EIG cable system:
Large Mode Fiber (LMF) Pure Silica Core (PSC) Z-Type Fiber (used for Segment S4.10) Dispersion Flattened Fiber (DFF) P-Type Fiber
EIG CableTyco Telecommunications SL17 Cable SL17 cable provides an optical path for undersea digitalTransmission, Command Channel and LMS signals.
It also provides a power path for the optical amplifiers.
The following types of SL17 undersea cable are installed in the EIG Submarine Cable System:
LightweightSpecial application (SPA) light-wire armored (LWA) single-armored (SA) double-armored (DA)
SL21 SPA cable is used in the trunk cable of BU4D (Segment 4.9)
Lightweight (LW) cable is the core cable for SL17 cable. The other cable types are produced by adding layers of protection.
EIG CableLand CableLand cable is the part of the undersea cable system that provides optical and
electrical connectivity between the beach manhole and the cable station.
Two types of land cable are used
LXE-RL -- Lightguide Express Entry rodent- and lightning-protected cable Provides optical fiber connectivity Prevents bite damage from field rodents. Shielded to provide protection from lightning. Contains same type and quality of optical fibers used in the undersea cable to which it is
joined. Designed for easy installation in cable-station conduits.
High-voltage (HV) cable provides metal conductor continuity needed to power the undersea repeaters Also used for connecting to the ocean ground bed and for accommodating electroding for
cable tracking and fault locating.
EIG undersea components
REPEATERS Repeaters are placed periodically in the undersea cable to compensate for the optical loss of the cabled fiber paths. Optical amplification is obtained with erbium-doped fiber (EDF) pumped by lasers operating at 980 nm. The repeaters also contain circuitry for optical monitoring and electrical power distribution to the optical amplifiers from the current supplied over the metallic conductor of the cable.
All repeaters in EIG are provided by NEC.
GAIN EQUALIZERS The gain shape and noise of Erbium-doped amplifiers in optical repeaters and the loss of cabled glass fibers are not constant over the wavelength band used by dense wavelength division multiplexed (DWDM) systems. Gain equalization in the undersea system is needed to ensure the proper transmission performance on all the channel wavelengths. Equalization is accomplished using passive optical filters at various locations in the undersea system. These passive optical filters have loss-versus-wavelength shapes designed to work together to achieve a desired net gain-versus-wavelength shape for each end-to-end optical path in the system. A single Gain Flattening Filter (GFF) is located in each repater.Gain equalizer tilt filters (GETs) are located in a specially designed cable-to-cable splice box, referred to a gain equalizer joint-tilt (GEJ-T). Shape compensation filters (SCFs) are located, one per fiber path, in a specially designed cable-to-cable splice box, referred to a gain equalizer joint-shape (GEJ-S). Predetermined wavelength filters (PWFs), are optically spliced and secured in qualified undersea plant GEJ housings
EIG undersea components — Gain Equalizers
A2
A1
Strain Relief and Seals
Branch Legs Rubber Bellows
Sea-Ground Electrode
TrunkLeg
Clamp Ring Assembly
EIG undersea components – Branching Units●Tyco 34A high-voltage, power-switched BU●Tyco 34B high-voltage, power-switched OADM branching Unit
● Accommodate various powering arrangements under control of the terminal stations using optical signals sent from the command-channel equipment (CCE).
EIG undersea componentsBRANCHING UNITS
The BU provides controllable electrical connections among the three cables and the seagroundelectrode. The electrical connectivity within the BU is controlled using an optical signal. Once a particular state is established, that state is held as long as a minimum holding current is maintained through at least one cable. BU power switching enables full or partial recovery in the event of cable faults.
The power state of Type-34A and Type-34B BUs is controlled by optical steering from thecommand channel equipment (CCE) in the terminal stations. For EIG, the BUs will be controlled at least from two cable stations. The CCE is a self-contained circuit pack that uses the same wavelength as the LME to issue commands to the power switched branching units (PSBUs).
All the BUs are oriented such that all trunks are facing Mumbai.
Egypt
Jeddah Batiment BlueCity
Fujairah
Mumbai
BU4A BU4B BU4C BU4D
TR TR TR TRA1 A1 A1 A1
A2 A2 A2 A2
FP
3
S4.5
S4.6
FP1 FP1
A2
In2 -T
Out2 -T
In4 -T
Out4 -T
Out
6-A
2
In6
- A2
Out
4-A
2
In4 -
A2
Out
2-A
2
In2
-A
6
In6 -T
Out6T
Out8 - A1
In8 -A1
Out9 - A1
In9 -A1
Out10 -A1
In10 -A1
Out
8-
A2
In8
-A
2
Out
9-
A2
In9
-A
2
Out
10-
A2
In10
-A
2
Out7 - A1
In7 -A1
In7 -T
Out7 -T
Out5 - A1
In5 -A1
In5 -T
Out5T
Out1 - A1
In1 -A1
In1 -T
Out1 -T
LBOA -A1
LBOB -A1
In3 -T
Out3 -T
Out3 - A1
In3 -A1
LBOB -T
LBOA -T
Add
3W- A
2
Add
3E-
A2
Dr3
E- A
2
Dr3
W-
A2
PRM
OADM
PWF
FP3
FP2 -E
1dB Coupler
Trunk7dB port
1dB
port
1dB Coupler
Trunk 7dB port1dB
port
FP3
FP2 -E FP2 -W
FP
2-
A FP
4-
A FP
2-
D FP
4-
D
~ 5 km
~ 50 km
S4.7
BU4C
LBO -2
BR
F- 2
BP
F-2
BR
F-3
BP
F-1B
RF
- 4
LBO -4
~ 5 km
BR
F-1
In R In R
T T
T T
In R R
T T
In
LBO -1
In In
Drop_1_in XPR_1_in
Add_2_out
Drop_2_in
Drop_2_Out Drop_1_Out
Pass T
hru F
ibers
Tr_1_inTr_2_inXPR_2_in
Add_1_out
FP2 -W
LBO -3
FP
1
Pass T
hru F
ibers
LBO -2, LBO -4 will be in
Joint -Box ~ 30 m from
PWF
LBO -1, LBO -3 will be in
Joint -Box ~ 30 m from
PWF
~ 200 m
EIG High-Level Type-34B OADM BU Architecture
Type-34B Branching Units
EIG undersea componentsThe OADM final drops in Segment 4 are a maximum of 12 traffic-carrying wavelengths dropped to Djibouti and Oman..
Wavelength reuse in the add/drop path requires the
installation of band reject filters
Type 34B BU Wavelengths
Terminal Station EquipmentThe terminal station equipment (TSE) for the EIG Cable System comprises the following subsystems:
line terminating equipment (LTE) Gen3 aggregate channel monitoring equipment (ACME) client interfaces cable termination unit (CTU) system powering (PFE) line monitoring system (LMS) element management system (EMS) network management system (NMS) data communications network (DCN) system synchronization powered spares bay (PSB) MPB enhancement equipment (segment S4.10)
Terminal Station Equipment
Line Terminating Equipment (LTE)
— line terminating equipment (LTE) with 1:16 wavelength protection
— gen3 aggregate channel monitor equipment (ACME)
— initial loading equipment (ILE)
— command channel equipment (CCE)
— MPB enhancement equipment (power booster)
TL
A
IL
E
HP
OE
CC
E
WT
E
Terminal Station EquipmentThe LTE for the EIG Cable System consists of the following components:
10-Gb/s high performance optical equipment (HPOE) supports bidirectional transmission of the client signal(s) by providing the processing necessary for transmission of those signals to and from the undersea system as one DWDMwavelength. The HPOE supports both directions of transmission for one wavelength for one end of a transmission path. The functions which it provides include the generation of the wavelengths necessary for DWDM transmission, modulation and demodulation suitable for long-haul transmission, forward error correction (both encoding and decoding), transmit signal adjustments, and transmission performance monitoring. The HPOE provides several optional interfaces to customer equipment.Wavelength termination equipment (WTE) combines individual wavelengths from the transmit portions of multiple HPOEs into a DWDM stream. In the receive direction the WTE separates the incoming DWDM stream from the undersea fiber into individual wavelengths for delivery to the receive portions of individual HPOEs for each wavelength.Terminal line amplifiers (TLAs) are provided where optical gain is required to compensate for component loss or to provide specific optical power levels at certain points within the LTE. Typical LTE configurations utilize a TLA to drive the underseatransmission fiber on the transmit side and to amplify the incoming DWDM signal on the receive side. Some LTE configurations require TLAs at other points within the WTE to compensate for additional optical component loss. MPB enhancement equipment at each station is managed by the MPB element management system (EMS). Transmit booster power amplifiers manufactured by MPB Communications are included in the Segment S4.10 design. These power amplifiers work in conjunction with Tyco SLTE and have maximum saturated optical power up to 30 dBm.
Terminal Station Equipment
Initial Loading Equipment (ILE)
The ILE provides channel power management for systems loaded with less than full system design capacity. For the FP providing service between Egypt South and Mumbai, the ILE is employed for the implementation of initial capacity. The technique of simple noise loading is employed for the implementation of initial capacity in Jeddah.
Command Channel Equipment (CCE)
The CCE is a network element (NE) that serves in the command channel path originatingat the Tyco Element Management System (TEMS) and terminating undersea at theType-34A BU and the Type-34B BU.
The CCE is a self-contained circuit pack that uses the same wavelength as the line monitoring equipment (LME) to issue commands to the Type-34A and Type-34B branching units. The branching units include redundant controllers that receive and decode the CCE commands. The supplied CCEs allow either PSBU to be controlled from at least two cable stations. The association of CCE to FP to PSBU controller is shown in the next slide.
Terminal Station Equipment - CCE
Jeddah Djibouti Oman
Zafarana Mumbai
A1
CCE
CC
E
CC
E
CC
E
CC
ECCE
A1A1
A1
TrTrTr Tr
A2A2 A2A2
PSBUBU4A
PSBUBU4B
OADM BUBU4C
OADM BUBU4D
Terminal Station EquipmentGen3 Aggregate Channel Monitoring Equipment (ACME) Gen 3 ACME is deployed at each EIG cable station. The Gen3 ACME implements acentral wavelength monitor that operates in conjunction with TEMS-based algorithms toprecisely position the HPOE transmit lasers onto a frequency grid defined by the ACMEfrequency reference.
10G STM-64/OC-192 This HPOE client interface provides access to the undersea transmission system for onebidirectional, full-duplex, optical, 9.953 Gb/s channel. The typical signal transported bythis client interface is an STM-64/OC-192 signal.
Client Interfaces
Terminal Station EquipmentCable Termination Unit
The cable termination unit (CTU) supports the following functions: terminate the cable to local ground measure current open circuit the cable provide tone generator and connections for other external, portable test gear and/orpower sources provide voltage and current to reconfigure PSBUsTyco meets the CTU requirements using the following equipment from Tinsley Precision Instruments installed in the Jeddah cable station.
Model 5941B CTU The Model 5941B CTU is a standard product in Tinsley's submarine cable product line. The Model 5941B CTU allows access to the cable for estimating distance to a shunt fault through electrical measurements of resistance and capacitance. The CTU also provides access to the cable for electroding tones to assist in locating the cable during maintenance activities. Additionally this unit does the following: terminates cable to ocean ground provides an open circuit to configure a BU provides cable access to connect a long haul cable test set
Terminal Station EquipmentOman Fujairah
System DC Power DesignPower feed equipment (PFE) provides power to the undersea repeaters in redundant equipment arrangements for continuous operation even in the event of a PFE converter failure. A Gen1 HV 10 kV PFE is provided in both Zafarana and Mumbai allowing for dual-end feeding of the system. Each PFE can easily single-end feed the entire repeatered segment. A Gen3 MV 5 kV PFE is provided in both Djibouti and Blue City. The figure here shows the nominal powering configuration. Segment voltage calculations are provided in the following slide.
G3 PFE
System DC Power Design
SegmentSegment Zafarana--MumbaiZafarana--Mumbai Djibouti –BU4CDjibouti –BU4C Blue City – BU4DBlue City – BU4D
Distance to be poweredDistance to be powered 58065806 101.4101.4 986986
Fiber pairsFiber pairs 33 44 44
Number of repeaters in Number of repeaters in power pathpower path
7575 11 1212
Volts/Repeater Volts/Repeater (weighted average)(weighted average)
2424 3232 3232
Number of Command Number of Command PSBUsPSBUs
44 00 00
Volts/Command PSBUVolts/Command PSBU 7272 7272 7272
Line Current (Amps)Line Current (Amps) 11 11 11
Cable Resistance Cable Resistance (ohms/km)(ohms/km)
11 11 11
Earth Potential Earth Potential (Volts/km)(Volts/km)
0.10.1 0.10.1 0.10.1
Total Total Branch/Segment Branch/Segment VoltageVoltage
85268526 144144 14691469
System DC Power Design — Segment voltage calculations
EIG Line Monitoring System (LMS)The LMS comprises all of the undersea and terminal equipment for the detection, location, and reporting of faults in the undersea equipment. It consists of:
● Gen3 LME Circuit PackA self-contained circuit pack which resides in the Common Shelf. Supports the monitoring of eight fiber pairsProvides an optical time-domain reflectometer (OTDR) function to locate optical faults along the length of a repeater span.
● High-Loss Loopback CouplersLoopback coupler modules (LCMs) provide optically passive, wavelength-selective HLLB and broadband optical time-domain reflectometry (OTDR) paths between amplifier pairs in the repeaters.
● LMS Software The Gen3 LME is managed by the TEMS including dedicated LMS graphical user interfaces (GUIs).
EIG Element Management System (EMS)
The EMS for the EIG Cable Network is the Tyco Element Management System (TEMS).
For EIG, the TEMS consists of an operations support processor (OSP) server collocated with the NEs in the cable stations. In addition, TEMS client workstations, software, other peripherals, and elements of local area network (LAN) and wide area network (WAN) equipment are provided at each of the cable stations.
WAN (Wide-Area Network)
LAN (Local-Area Network)
TEMS OS (Operations Support) Processors
TEMSLocalAccess
HPOE WTE TLA DCD LME PFE
CCE LTE ILEUnderseaEquipment
CCE = command channel equipmentDCD = discrete connection deviceHPOE = high performance optical equipmentILE = initial loading equipmentLME = line monitoring equipmentLTE = line terminating equipmentPFE = power feed equipmentTLA = terminal line amplifierWTE = wavelength termination equipment
TEMS ClientWorkstation
EIG Element Management System (EMS)
In addition to the NE monitoring function, the TEMS complex of OSPs, along with theTEMS client workstations, provides capabilities for surveillance and fault localization ofthe cable system. When connected to the LME, the TEMS provides similar maintenanceand surveillance capabilities for the undersea equipment.
OSPs also provide database support for data storage and support external interfaces,such as a common object request broker architecture (CORBA) northbound interface(NBI) to a network management system.
TEMS and DCN are deployed across EIG cable stations. A new TEMS OSP is providedin Zafarana, Mumbai, Djibouti, Blue City, Jeddah, and Fujairah along with a TEMS clientworkstation.
EIG Network Management System (NMS) The TEMS-NMS is part of the Tyco Element Management System (TEMS) family of software products. Its main purpose is to provide an integrated network view of TEMS-managed resources at the network management layer (NML). TEMS-NMS offers users a cable-system-wide common interface to undersea trails, fault management (including root cause analysis), and performance management, as well as cut-through access to network element (NE) management via TEMS.
EIG DCN Configuration
Data Communications Network
The Data Communications Network (DCN) is a local area network (LAN)/WAN that provides the backbone connection that links the different network management functions. The DCN for EIG provides voice and data services among all network locations. The DCN consists of routers and Ethernet switches. Figure 1-12 shows the proposed EIG DCN high-level architecture. The as-built DCN configuration is subject to change.
Each Gen3 HPOE provides a user channel implemented as part of the forward error correction (FEC) encoding and decoding on the HPOE circuit pack. The user channel provides an Ethernet 10-Base-T link between the local and the far-end station. The bandwidth necessary to provide this communications channel is allocated in the FEC overhead.
Each user channel connects to a router port in the cable station. The routers in different cable stations are then able to communicate with each other through the overhead channels just as though they were connected together with a crossover cable. The routers in each station are connected to IP switches that in turn connect to all the TEMS and networking (DCN) equipment.
EIG DCN Configuration-Cable Station
9876543210
A
B
C
D
E
G
H
F
9876543210
TEMS System Drawings
SD-1M049-127
SIZE SHEET#
A
B
C
D
E
G
H
F
C2SCALE:
NONE
EIG
RevisionsREV. DATE DESCRIPTION
11/27/001 INITIAL ISSUE RPH
NOTICE - Copyright material - all rights reserved:These drawings/specifications, including any technical data are released for contractual agreement only and may not be copied or reproduded in part or in whole without the written permission of TyCom. All copies are the property of TyCom and must be returned immediately upon request.
NOTES:
In Band (Tyco HPOE Overhead)Out-of-Band (E1)
EIG - Top Level DCN Connectivity
TEMS/NMS Client
TEMS Printer
Router + IP Switch
Zafarana , Egypt South(ZFR)
4xG3 OH (40MB/sec)
Jeddah, Saudi Arabia (JED) Djibouti (DJI)
Barka, Oman (BCT)
Mumbai, India(MMB)
Router
IP Switch
TEMS/NMS Server
TEMS/NMS Client
VLAN Switch
DCD
LTE,FP1
RAU
Time Server
PFE
LTE,FP2
TEMS Printer
LTE,FP3
Router
IP Switch
TEMS/NMS Server
TEMS/NMS Client
VLAN Switch
DCD
LTE,FP1
RAU
Time Server
PFE
LTE,FP2
TEMS Printer
LTE,FP3
Router
IP Switch
TEMS/NMS Server
TEMS/NMS Client
DCD
LTE,FP1
RAU
Time Server
PFE
LTE,FP2
TEMS Printer
LTE,FP3
2xG3 OH (20MB/sec)
2xG3 O
H
(20MB
/sec)
2xG3 OH (20MB/sec)
2xG3 OH (20MB/sec)
10/100BTRouter
IP Switch
TEMS/NMS Client
DCD
LTE,FP1
RAU
Time Server
PFE
TEMS Printer
Fujairah, UAE(FUJ)
LTE,FP1, Cab2
2xG3 O
H
(20MB
/sec)
MPB LCT
MPB NE&LCT
TEMS/NMS Server
MPB NE&LCT
VLAN Switch
Router
IP Switch
TEMS/NMS Server
TEMS/NMS Client
VLAN Switch
DCD
LTE,FP1
RAU
Time Server
PFE
LTE,FP2
TEMS Printer
LTE,FP3
VLAN Switch
Router
IP Switch
TEMS/NMS Server
TEMS/NMS Client
VLAN Switch
DCD
LTE,FP1
RAU
Time Server
PFE
LTE,FP2
TEMS Printer
LTE,FP3
S1.4
BNOC, Abu Talat (ABT)
Chennai (NOC)
TEMS/NMS Client
TEMS Printer
Router + IP Switch
RAU
S3ASN DCN
ASN DCN
10/100BT
BudeASN DCN
ASN Router in Bude will route Tyco Subnets so Mumbai gets DCN backup
ASN DCN
3 E1s
3 E1s
10/100BT
1 E1
1 E1
Tyco Telecommunications (US) Inc. Confidential and Proprietary
© Copyright 2009 All rights reserved.
Unity System SynchronizationA Symmetricom SyncServer S200 NTP rack mount time server provides timing for TEMS/NMS/DCN. Tyco supplies and installs the synchronization equipment.
The S200 GPS Network Time Server synchronizes clocks on servers for accurate timing synchronization among every NE and TEMS OSP in the network. The S200 provides reliable and secure network synchronization technology by combining multi-port, high-speed and high-capacity network interfaces and versatile GPS timing receiver technology.
The Stratum 1 level S200 derives its time directly from the atomic clocks aboard the GPS satellite system. By using the integrated, 12-channel GPS receiver, visible satellites can be tracked and used to maintain accurate and reliable time. If the GPS reference is ever lost, the S200 can automatically revert to a Stratum 2 mode and retrieve time from other user-designated time servers
It is the Purchaser's responsibility to define a synchronization plan for the SDH network transported over the Tyco DWDM facility.
top related