1 pertemuan 07 teknik modulasi matakuliah: h0174/jaringan komputer tahun: 2006 versi: 1/0

1

Pertemuan 07Teknik Modulasi

Matakuliah : H0174/Jaringan Komputer

Tahun : 2006

Versi : 1/0

2

Learning Outcomes

Pada akhir pertemuan ini, diharapkan mahasiswa

akan mampu:

• Menjelaskan teknik modulasi

3

Outline Materi

• Teknik Modulasi • Modulasi analog• Modulasi digital

4

Encoding Techniques

• Analog data, carrier analog signal• Digital data, carrier analog signal

Analog Modulation

• Analog data, carrier digital signalDigital Modulation

• Digital data, carrier digital signalEncoding

5

Analog Data, Analog Signals

• Why modulate analog signals?– Higher frequency can give more efficient

transmission– Permits frequency division multiplexing

• Types of modulation– Amplitude– Frequency– Phase

6

Analog Modulation

7

MODULASI

TUJUAN:• MENGUBAH SINYAL DARI KOMPUTER YANG

DIGITAL MENJADI SINYAL ANALOG YANG DIPERLUKAN OLEH SALURAN KOMUNIKASI

• MEMPERPANJANG JARAK JANGKAU SINYAL INFORMASI

• MODEM MERUPAKAN HARDWARE UNTUK KEDUA PROSES INI

LST/FASKD/CINQ

8

Type Modulasi Digital /Analog

9

Modulation Techniques

10

Frequency Shift Keying

• Most common form is binary FSK (BFSK)• Two binary values represented by two different

frequencies (near carrier)• Less susceptible to error than ASK• Up to 1200bps on voice grade lines• High frequency radio• Even higher frequency on LANs using co-ax

11

Phase Shift Keying

• Phase of carrier signal is shifted to represent data

• Binary PSK– Two phases represent two binary digits

• Differential PSK– Phase shifted relative to previous

transmission rather than some reference signal

12

PSK Constellation

13

Quadrature PSK

• More efficient use by each signal element representing more than one bit– e.g. shifts of /2 (90o)– Each element represents two bits– Can use 8 phase angles and have more

than one amplitude– 9600bps modem use 12 angles , four of

which have two amplitudes

14

4-PSK Constellation

15

4-QAM and 8-QAM

16

Quadrature Amplitude Modulation

• QAM used on asymmetric digital subscriber line (ADSL) and some wireless

• Combination of ASK and PSK• Logical extension of QPSK• Send two different signals simultaneously on

same carrier frequency– Use two copies of carrier, one shifted 90°

– Each carrier is ASK modulated– Two independent signals over same medium– Demodulate and combine for original binary

output

17

BIT dan BAUD

18

ModulationModulation UnitsUnits Bits/BaudBits/Baud Baud rateBaud rate Bit Rate

ASK, FSK, 2-PSKASK, FSK, 2-PSK Bit 1 N N

4-PSK, 4-QAM4-PSK, 4-QAM Dibit 2 N 2N

8-PSK, 8-QAM8-PSK, 8-QAM Tribit 3 N 3N

16-QAM16-QAM Quadbit 4 N 4N

32-QAM32-QAM Pentabit 5 N 5N

64-QAM64-QAM Hexabit 6 N 6N

128-QAM128-QAM Septabit 7 N 7N

256-QAM256-QAM Octabit 8 N 8N

Perbandingan Bit dan Baud rate

19

Pertemuan 08Teknik Encoding

Matakuliah : H0174/Jaringan Komputer

Tahun : 2006

Versi : 1/0

20

Learning Outcomes

Pada akhir pertemuan ini, diharapkan mahasiswa akan mampu :

• Menjelaskan teknik encoding

21

Outline Materi

• Polar• Bipolar• Unipolar

22

Digital to Digital Encoding

23

Terminologi

• Unipolar– All signal elements have same sign

• Polar– One logic state represented by positive voltage

the other by negative voltage• Data rate– Rate of data transmission in bits per second

• Duration or length of a bit– Time taken for transmitter to emit the bit

24

Terminologi

• Modulation rate– Rate at which the signal level changes– Measured in baud = signal elements per

second• Mark and Space– Binary 1 and Binary 0 respectively

25

Digital to Digital Encoding

26

Polar Encoding

27

Bipolar Encoding

28

Modulation Rate

29

Unipolar Encoding - NRZL

30

Nonreturn to Zero Inverted

• Polar, Non Return To Zero Inverted• Non return to zero, inverted on ones• Constant voltage pulse for duration of bit• Data encoded as presence or absence of

signal transition at beginning of bit time• Transition (low to high or high to low)

denotes a binary 1• No transition denotes binary 0• An example of differential encoding

31

NRZ-L and NRZ-I

32

RZ Encoding

33

Biphase

• Manchester– Transition in middle of each bit period– Transition serves as clock and data– Low to high represents one– High to low represents zero– Used by IEEE 802.3

• Differential Manchester– Mid bit transition is clocking only– Transition at start of a bit period represents

zero– No transition at start of a bit period represents

one– Used by IEEE 802.5

34

Manchester and Diff. Manchester

35

Multilevel Binary

• Use more than two levels• Bipolar-AMI– zero represented by no line signal– one represented by positive or negative pulse– one pulses alternate in polarity– No loss of sync if a long string of ones (zeros

still a problem)– No net dc component– Lower bandwidth– Easy error detection

36

Bipolar AMI Encoding

37

Perbandingan skema enkoding

• Error detection– Can be built in to signal encoding

• Signal interference and noise immunity– Some codes are better than others

• Cost and complexity– Higher signal rate (& thus data rate) lead to

higher costs– Some codes require signal rate greater than

data rate