1 the internet protocol. 2 understand the role of the internet protocol (ip) examine ip address...

1

The Internet Protocol

2

• Understand the role of the Internet Protocol (IP)

• Examine IP address classes

• Use Address Resolution Protocols (ARPs)

• Decode IP packet structure

• Examine IP on various physical networks

Contents

3

The Internet Protocol

4

Internetworking Concepts• Internet

– Different networks connected together

5

Physical-Transport Independence

6

• IP layer– Provides powerful logical abstraction– Hides Physical Layer dependency

• Upper layer processes see a logical IP network

7

Functions of Internet Protocol

• Internet Protocol (IP) provides– Datagram service– Phisical network independence for higher layer processing– Logical address for computers on network– Independence from maximum transmission unit size– Fragmentation and reassembly control

• These topics are examined in the next several viewgraphs

8

IP Datagram Service

• Ip makes use of “best efforts” service

– Similar to postal services

• Advantages

– Simplicity and less overhead

– Upper layers can build more reliable service

– Adequate for many networks

-- LANs, frame relay

9

Need for Uniform Addresses(Logical Addresses)

• Phisical networks use different addressing schemes– Ethernet networks use 6-byte addresses– X.25 networks use 14-digit decimal codes– ARCNET networks use 1-byte addresses

• How should nodes on a logical network be identified?– Solution: Use a logical address to provide a uniform way of

addressing all network nodes rregardless of their physical network connections

10

Message Size Limitations

• Physical networks support different maximum frame size– Example: 1518 bytes for Etherne, 512 bytes for ARCNET, etc.

• Upper layers (TCP) del with message size of arbitrary length

• Problem: How do you send arbitrarily long messages to networks with packet-size constraints?– A solution: datagrams, fragmentation, and reassembly

11

Names and Addresses• LAN Addressing

– NIC addresses (like National Insurance Number)– Broadcast technology– No geography

• Network Addressing– IP addresses (telephone numbers)– Permits subnetting (like county and area codes)– Gives routing capability– Maps to NIC address through ARP

• Human Friendly Names– Shows affiliations (like a normal mail address)– Structured independently of IP– Used to identify people, computers, networks, organistations.– Maps to IP through DNS

12

Typical MTU Size

Network Typical frame size (bytes)

MTU (bytes) Maximum frame size (bytes)

Ethernet 1024 1500 1518

IEEE 802.5

(4 Mbps)

1024 4464 4508

IEEE 802.5

(16 Mbps)*

1024/4096 17,756 17,800

ARCNET 508 508 512

X.25 128 4080 4096

*Assuming a token-holding time of 9 ms.

MTU = maximum transmission unit

13

Fragmentation andReassembly Control

• Many applications on hosts tend to use large message size– File transfer, graphic applications

• Many wide area networks prefer smaller packet size in comparison with some applications– Better use of buffer memory

– Smaller probability of error for each packet

– Smaller delay for priority packets

• Larger packet size in networks (such as LANs) can result in more efficient data transfer

14

Freagmentation andReassembly Control (continued)

• What would happen to packets going from Host B to Host A?

Note: TCP messages can be fragmented by sender

15

The Internet Protocol

16

Calculating an Address Class(continued)

Address Class First Decimal Number in Dotted Decimal Address

Minimum Maximum

A 1 126

B 128 191

C 192 223

D 224 239

E 240 247

17

Range of Assignable Addresses

netid hostid

Class Minimum Maximum Minimum Maximum

A 1 126. 0.0.1 255.255.254

B 128.0 191.255. 0.1 255.254

C 192.0.0 223.255.255 .1 254

D 224. 239. N/A N/A

N/A = not applicable

• Why is address 127.x.x.x not assigned?

18

Software Loopback

• Local machne can be addressed by 127.x.x.x

– “x” can be any value-- Typically, 127.0.0.1 is used for local host

– Also referred to software loopback test-- Packets never transmitted

-- Packets copied from transmit buffer to receive buffer

19

Hostid and Broadcast Addresses

• Hostid of 0 is never assigned to an individual host– An internet address with hostid of 0 refers to the network itself

-- Example: 144.19.0.0

-- Refers to class B network 144.19.0.0

• Directed broadcast addresses

– By convention, broadcast addresses have all 1 s in hostid field

-- Example: 144.19.255.255

– Important exception is software derived from BSD 4.2 UNIX

-- Uses all 0s broadcast

-- Example: 144.19.0.0

• Limited broadcast address– Broadcast address of 255.255.255.255

– IP packets with this address usually do not cross router boudary

– Not all TCP/IP implementations support it

20

The Internet Protocol

21

The Problem: Need for Address Resolution

• How does a host know about another host’s physical address?– Hard code knowledge of physical addresses?– Can you logical (IP address) to determine physical address?

-- Address resolution protocols

22

Dynamic Address ResolutionProtocol Mechanism

• Host A broadcasts ARP request on network containing B’s IP address

• All nodes receive ARP request, but only B responds because its IP address is included in the ARP request

• B replies to A, with B’s physical address

• Assumption: requires broadcast capability on network (i.e., Ethernet, Token Ring, etc.)

23

ARP Request/ResponsePacket Structure

• Numbers in ( ) represent bits

24

ARP Refinements: Caching

• In previous example– Host A uses ARP reply to build a local cache -- Cache contains <IP addr., Physical addr.> pair

Host B is likely to reply to A– Use ARP request to store A’s <IP addr., Psysical addr.> in cache

• Other host extract A’s <IP addr., Physical addr> from ARP request

• Machines booting on netork announce their <IP addr., Physical addr.>– Other machines cache this information– Also used for duplicate IP address detection

25

IP Address for Disless Nodes

• Workstations store their IP addresses in local storage media– How do diskless workstations store their IP addresses?– A solution: use Reverse ARP (RARP)

-- Keep <IP addr., Physical addr.? Bindings on RARP server

-- Potential for simplifying IP adress administration?

26

RARP Operation

• RARP uses same packet structure as ARP

Sender address – PADestination address = broadcastEthertype = 8035 hex

27

RARP Operation (continued)

• Send broadcasts RARP request– SENDER HA ← Sender’s physical address– TARGET HA ← Sender’s physical address

• RARP servers respond with– OPERATION TYPE ← reply– TARGET IP ← Answer (requester’s IP address)– DATA LINK DA ← Requester’s physical address

• Lssues– RARP request storms– Primary and backup RARP servers

28

BOOTP

• BOOTP makes use of UDP/IP to obtain IP addresses and other information

• BOOTP does not provide clients with bootstrap image– It provides the name of the boot image– Boot image is transferred using Trivial File Transfer Protocol

(TFTP)• To forward BOOTP requests across routers, routers must be

configured with rekay agents to foeward BOOTP packets

29

Troubleshooting Duplicate IP Addresses and ARP Tables

• Nodes on an IP network must have unique IP addresses– Otherwise, ARP tables are initialized with incorrect <IP addr., Physical

addr.> mappings

– Symptoms of bad ARP tables are

-- Users unable to access TCP/IP hosts

-- Workstations and servers crashing

-- Intermittent problems with applications not working

• Common results of duplicate IP addresses are– ARP table corruption at workstations

– ARP table corruption at servers

30

Duplicate IP Addresses at Workstation

• Step 1– Workstation initiates FTP session to server

31

Duplicate IP Addresses at Workstation (continued)

• Step 2– Second workstation with duplicate IP address initiates FTP session to server

32

Duplicate IP Addresses at Workstation (continued)

• If the server receives a TCP/IP connection request from a second workstation with a duplicate IP address, the TCP/IP software may– Ignore the second request– Overwrite the server ARP cache entry with hardware address from

second workstation– Get confused and crash

• In either of the above choices, one or both of the workstations with the duplicate IP address will have connection problems

33

Duplicate IP Addresses at the Server

• Workstation tries to connect to VAX at IP address 144.19.74.102

• If the SUN server at duplicate IP address 144.19.74.102 returns an ARP reply faster than the VAX, the workstation connects to the SUN server instead of the VAX

• What happens if the SUN server and VAX server also act as routers?

34

ARP Display Utilities

• Resolving duplicate IP address problems can be a challenging task on large networks– Keeping good records of IP address assignments and hardware

addresses of devices can help– Use utilities to display and fix ARP cache entries

-- Most UNIX systems have the arp utility

arp -aarp -d hostnamearp -s hostname hardware_addr

Display all ARP entries in table Delete an entry from ARP tableAdd a new entry in ARP table. Entry is not timed out!

35

The Internet Protocol

36

Hands-On Exercise 3.1: Address Resolution

• Your instructor will guide you to Hands-On Exercise 3.1 in the Exercise Manual

37

The Internet Protocol

38

Hands-On Exercise 3.2: Observing Effects of Duplicate IP Addresses

• Your instructor will guide you to Hands-On Exercise 3.2 in the Exercise Manual

39

The Internet Protocol

40

IP Packet Structure

Background:

This exercise is a guided tour on the structure of IP packets. It will be done concurrently with the lecture, which will explain the IP structure. You will use the packet trace that you saved in an earlier exercise for understanding the IP packet structure.

Objectives:

• Examine the IP packet fields

• Understand the functionality of the IP protocol

41

IP Packet Structure (continued)

1. Run LANWatch at your workstation.

If you forgot how to run LANWatch, see page 16 in the Exercise Manual.

2. Load the filt TELNET. TR1 that contains the TELNET packet trace youstored in an earlier exercise.

3. Highlight one of the red packets that contain IP protocol information and display it in the detailed format.

Follow the instructions given to you by the instructor.

42

IP Field: Version

• Version field– Indicates format of IP header– Declares version of protocol to which datagram belongs– Allows development of new protocols while network is operational

• What is the version of the IP packet on your screen?

43

IP Field: Internet Header Length

• Internet header length– Measured in 32-bit words– Required because IP header contains variable length options field

• What is the internet header length of the IP packet on your screen?___________________________• Does the IP packet have an options field?

Yes No

44

IP Field: Type of Service (TOS)

• Type of service– Informs networks on Quality Of Service (QOS) desired

45

IP Field: Type of Service (TOS)

• What is the bit pattern for TOS of IP packet on your screen? __________________________

• What is the TOS value? _________________

46

IP Field: Total Length

• Total length– Length of datagram (octets), including IP header and data portion– Maximum datagram size is 65,535 octets

• All hosts must be prepared to receive datagrams of 576 octets– 512 octets of data and 64 octets of protocol overhead

• What is the total length for the IP packet on your screen? _________________ octets?

47

IP Field: Identification

• Identification

– Set uniquely for each datagram

– Used as an aid in assembling fragments of a datagram

• What is the identification value for the IP packet on your screen? ___________

48

IP Field: Identification (continued)

• Use cursor keys (↑, ↓) to examine identification field values of IP packets before and after this IP packet

– What is the identification value of the previous IP packet?______– What is the identification value of the next IP packet?________

49

IP Field: Flags

• What are the flag settings for the IP packet on your screen?

DF flag =_______ MF flag = _______

50

IP Field: Fragment Offset

• Fragment offset– Position of fragment's data relative to the beginning of data carried in original datagram

• Maximum of 8192 fragments per datagram• Identification field is same for all fragments

51

IP Field: Fragment Offset

• What is the fragment offset for the IP packet on your screen?_________________________

52

IP Field: Time to Live

• Time to live– Maximum time IP datagram can remain on internet– When TTL = 0, IP datagram is destroyed (dropped)– Decreased by time for IP header processing, but must be decreased by at

least 1

53

• What is the TTL field value for the IP datagram on your screen?____________________

54

IP Field: Protocol

• Protocol field

– Indicates which Upper Layer Protocol (ULP) is to receive data portion of IP datagram

• What is the protocol field value for the IP packet on your screen?

55

IP Field: Protocol (continued)

Protocol field value Keyboard Description

0 Reserved

1 ICMP Internet Control Message Protocol

6 TCP Transmission Control Protocol

8 EGP Exterior Gateway Protocol

9 IGP Any private Interior Gateway Protocol

11 NVP Network Voice Protocol

17 UDP User Datagram Protocol

22 XNS IDP Xerox Network System’s Internet Datagram Protocol

29 ISO TP4 ISO Transport Protocol class 4

89 OSPF Open shortest path first

56

IP Field: Header Checksum

• Header checksum– Covers only the IP header– Add up 1's complement of each data item (16-bit) and then the 1 's complement of the

sum– Recomputed at every route because TTL field changes

• What is the header checksum field value of the IP packet?_______________________

57

IP Field: Source Address, Destination Address

• Source and destination addresses are divided in netid and hostid fields

• What are the source-address and destination-address fields of the IP packet on your screen?

Source address: _______________

Destination address: ____________

58

IP Field: Options

• Options– Officially defined options are

-- Security, loose source routing-- Strict source routing, record route-- Stream ID, Internet timestamp

• Options are of two types

59

• Are there any options defined in the IP packet on your screen?_________________________

60

Bonus

• Pick an IP packet (that appeals to you!) within LANWatch and analyze it on your own. Try to identify the blank fields in the IP datagram above. Label these fields and enter the value in the fields for the IP packet you are analyzing.

61

The Internet Protocol

62

Duplicate IP Address Problem

• IP addresses must be unique– Most network software assumes trusted hosts

• Duplicate IP addresses result in– Network software becoming confused, malfunctioning– Routing problems

-- Because routing information is encoded in IP address netid and hostid

63

Buffer Reassembly Problem

• Not all IP implementations are equally robust– Some IP implementations may not reassemble datagram fragments

correctly– Solution: Configure IP software for DF = 1

-- Problem:1. DF flag may not be configurable by network manager2. Fragmentation may be required if IP datagram traverses networks

with small MTU

64

IP Trailers: 4BSD UNIX

• Software derived from BSD 4.2 UNIX may use alternate IP encapsulation

– Done for efficient memory management

-- To place data information on page boundary

• Berkeley-style trailer encapsulation

– Will not interoperate with normal IP encapsulation (example: IP routers)

65

Avoiding IP Trailers

• On many UNIX systems, IP trailer encapsulation can be controlled by the if conf ig utility

• Example:

ifconfig ethO -trailersifconfig ethOethO: flags=23<UP,BROADCAST,NOTRAILERS>inet 144.19.74.201 netmask ffffOOOO broadcast 144.19.255.255

66

All O's Broadcast

• IP software implemented on earlier BSD 4.2 UNIX may use all O's broadcast– Can cause confusion with most systems that use all 1's broadcast

• Use if conf ig utility to enable all 1's broadcast– May not work if broadcast mechanism has been hard-coded

• Example:

ifconfig ethO broadcast 144.19.255.255ifconfig ethOethO: flags=23<UP,BROADCAST,NOTRAILERS>inet 144.19.74.201 netmask ffffOOOO broadcast 144.19.255.255

67

The Internet Protocol

68

Using Unique Internet Addresses

• If building your own private internet– Decide on an IP address class

-- Popular choices are class B, class C• If you decide not to connect to the Internet

– You can select your own IP network number• If you decide to connect to the Internet

– You should apply to Network information Center (NIC) for unique internetwork number

– Alternatively, use IP address translation devices such as application-level gateways

-- Application-level gateways also can be used to implement-- firewalls for enhancing security-- Can be used to avoid duplicate IP address conflicts

69

Application-Level Security Gateway (Firewall)

• Application-level firewall provides

– Isolation between duplicate IP addresses

– Security by restricting access between internal and external networks at the Application Layer

– Alternatively, use a private address

70

Obtaining Unique IP Network Number

• To obtain Internet number to connect to the Internet, apply to

– Network SolutionsInterNIC Registration Services505 Huntmar Park DriveHerndon, VA 22070 USAHOSTMASTER@INTERNIC.NET

• Users wanting to connect to the MILNET must still apply to

– DDN Network Information Center14200 Park Meadow Drive, Suite 200Chantilly, VA 22021 USAHOSTMASTER@NIC.DDN.MIL

• See Appendix D for application form for Obtaining IP Network Number

71

IP Address Database

• Local management of IP addresse– Configuration database kept on local machine

-- Often simple text files, such as /etc/hosts (UNIX) ornet . cfg and config . tel, etc. (MS-DOS)

– RARP servers– BOOTP server– DHCP server (covered in Course 154) – Name servers

• RARP servers can– Simplify IP address maintenance– Problems:

-- Updates when data-link address changes-- RARP storms-- Single point of failure

72

The Internet Protocol

73

IP on IEEE 802 LANs

• Initial IP implementation on LANs was on Ethernet– Ethertype field in Ethernet header is used to indicate IP packet

-- Ethertype = 800 hex for IP packets

• There is no Ethertype field in IEEE LANs- How do you indicate Ethertype information?

-- Use lEEE802.2LLC

74

IEEE 802.2 Logical Link Control

• IEEE LANs use a sublayer called LLC to indicate protocol (software) addresses

75

The SNAP Protocol

• A special DSAP or SSAP value in IEEE 802.2 field indicates that Ethertype field is in the data field

• This mechanism is called SubNet Access Erotocol (SNAP)

76

IP on IEEE 802.3, 802.5, and FDDI

77

IP on X.25

• First octet in X.25 call request data field indicates IP protocol– X.25 virtual circuit is used to transmit datagrams

-- Closed after a period of inactivity-- Treated as a point-to-point circuit

78

IP on ATM

– ATM transmits data in fixed 53-byte cells (5 bytes header and 48 bytes data)

– ATM cells available on demand with low latency

-- Real-time audio/video-- Multimedia applications

– ATM provides virtual channels with quality of service (QoS) parameters

79

Chapter Summary

• The role of the Internet Protocol (IP)

• IP address classes

• Address Resolution Protocols

• IP packet structure

• IP on various physical networks

You have learned about