1 vak 1 - ruseurosteel.ruruseurosteel.ru/userimages/18_va_fire.pdf · stop€bar€glazing...
Post on 05-Oct-2018
225 Views
Preview:
TRANSCRIPT
cut out D90 in theventilation area
Middle glazing fire resistant glass
Thermopane glazing withchamber ventilation
Stop bar glazing fire resistant glass
Stop bar glazing fire resistant glass
Permitted fire resistant glasses:
Glue selfadhesiveAlu sealing tape fully overhardwood strip(see 18.1.2)
Glue 3mm hardwood stripfully to profile withfire resistant silicone
Chamber ventilation only with Insulating glass Do not install chockings in front of air inlet/outlet pipes
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Brandschutz bzw. isolierglas EI 30, EI 60 Fire resistant/insulation glass EI 30, EI 60
18.1.1Rev.
Stop bar glazingfire resistant glazing
middle glazingfire resistant glass
Countersunkhead screwM4 x 30Drilling screwØ3,9 x 32, DIN7504
Installing of the alu sealing tapefor thermopane glazing
flat steel25x3mmweld toframe
weld together 3x20 (e = 250mm)seal up the spacewith silicone
cut out D90in the ventilation area
flat steel25x3mmweld toframe
weld together 3x20 (e = 250mm)
Thermopane glazing withchamber ventilation
Glue 3mm hardwood stripfully to profile withfire resistant silicone Chamber ventilation only with Insulating glass
Do not install chockings in front of air inlet/outlet pipes
Glue 3mm hardwood stripfully to profile withfire resistant silicone
Glue selfadhesiveAlu sealing tape fully overhardwood strip
Glue selfadhesiveAlu sealing tape fully overhardwood strip
glass sizeglass thickness insulating glass
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Brandschutz bzw. isolierglas Fire resistant/insulation glass
18.1.2Rev.
The particular design is deposited on the "Deutschen Institut für Bautechnik DIBT"
Insulating glass Insulating glass
The approved special models:• Special shapes• Tinted glass with insulating glass (ESG opposing pane) ISO 3016,3026,3036 for interior use only• Screen print with insulating glass (ESG opposing pane) ISO 3016,3026,3036 for interior use only• Protective coating against heat and solar radiation with insulating pane
(float or ESG exterior glass) 3017, 3018 also for exterior use• Noise reduction up to 45 dB (at 3017 and 3027 with pane interspace of 12mm)
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Pyrostop, Pilkington
18.2.1Rev.
Laminated glass Typ"PYRANOVA 30S2.0"
Laminated glass Typ"PYRANOVA 30S2.1"
Insulatinglaminated glassTyp "ISOPYRANOVA 30S2.0"
Insulatinglaminated glassTyp "ISOPYRANOVA 30S2.1"
The particular design is deposited on the "Deutschen Institut für Bautechnik DIBT"
The approved special models:• Special shapes• Coloured• Screen print• Coated• Noise reduction 30S2.0 to 38 dB
30S2.1 39 to 40 dBISO 30S2.0 43 to 45 dBISO 30S2.1 41 to 51 dB
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Pyranova, Schott
18.2.2Rev.
All glass types can be delivered in the following styles: completely matt partially matt specially shaped breakthrough resistant / throwt hrough resistant according (EN 356) bullet resistant according (EN 1063) completely/partially screen printed with noise reduction up to 54dB
The particular design is deposited on the "Deutschen Institut für Bautechnik DIBT"
Insulating glass Insulating glass
Glass thickness varies according to style.
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Contraflam, Swissflam, Vetrotech
18.2.3Rev.
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Notizen Notes
18.2.4Rev.
Panels with fire resistant plates/mineral fibre boards
x...see 18.3.2
ES 8 orEVB 2x15
Sealing stripVB 3x17
silicone
silicone
Sealing strip VB 3x17or EVB 2x15or D80/D90
steel angle 10x20x2, continuous
Filling 40mm thick
Fixing of steel angle, cant profile, ....optional: sheetmetal screw Ø3,5x9,5 countersunkhead screw Ø3,5x60 steel blind rivet Ø3,2x6 (weld slots in drilling area shut) Spotwelding Plug welding e<250mm
Filling:mineral fibre boards from aqualitycontrolled productionBuilding material classification A 1DIN 4102 part 1,TERVOL BS14optionalHeralan BS15Rockwool RPB15inserted as single or double layer withat least 130 kg/m³with steel sheets on both sidesgalvanised 12 mmoptional stainless steel
panel
Filling 50mm thick
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Paneelvarianten Panel variants
18.3.1Rev.
EI 30:
X = gypsum plasterboard (Rigips, Knauf) 2x12,5mm Rigidur 2x10mm Fermacell 2x10mm Promatect H 4x6mm, 2x12mm, 1x25mm max. size: 1288 x 2370mm all types with steel sheet on both sides 0,81,5mm 20mm Supalux S with or without steel sheet on both sides
Glue together steel sheets with fire resistant sheets (withPromat silicone glue K84, Rigidur Nature Line joint sealer or Fermacell joint sealer).
Ste
el s
heet
Niro
, Ms,
Cu,
Alu
Ste
el s
heet
Niro
, Ms,
Cu,
Alu
silicone
Panel fitting with rubber sealExecution analogue glass fitting
Panel fitting with siliconeExecution analogue glass fitting
EI 60:
X = gypsum plasterboard (Rigips, Knauf) 2x15mm Rigidur 3x10mm Fermacell 3x10mm, 2x15mm Promatect H 4x 8mm, 2x15mm, 3x10mm max. size: 1288 x 2370mm all types with steel sheet on both sides 0,81,5mm
Schmidhüttenstraße 5, 3500 Krems, AustriaT. +43/50304/14355, F. +43/50304/54704systemprodukte.krems@voestalpine.com
voestalpine Krems GmbH
Paneelaufbau Panel design
18.3.2Rev.
top related