1159-1160 f48-017 ceng - sg.misumi-ec.com 2 -1160 ceng 2nd q ... 50 *8 10 10 28 13 15 27 18 7.5 11 9...
Post on 21-May-2018
216 Views
Preview:
TRANSCRIPT
-11592
1159-1160_F48-017_cENG
-11602
1159-1160_F48-017_cENG cENG 2nd
Q Aluminum Knurled Handwheels
Aluminum Knurled Handwheels / Stainless Steel Knurled Handwheels Knurled Knobs / Thick Knurled Knobs
E The drawing shows Tapped Type.
E Tapped-type handles come with one set screw each. Alum.: SCM435, Black Oxide, Stainless Steel: SUS304
With Slit Handle Without Slit Handle
G
H
SA Y
M1
1.5h/2
d2W
D
BP D 1
Xd 1
dH8
h1
H
SA
h1
Y
M1
1.5h/2
d2W
D D1
Xd 1
dH8
D
Lr
D
Mh
D1
G
BP
ASh
H
Lr
M
d (H
8)
Without Standard HandleWith Standard Handle
Q Stainless Steel Knurled Handwheels
D
Unit PriceStandard Slit Type
With Handle Without Handle With Handle Without HandleHOK HBK HOKW HBKW HOKS HOKN HBKN HOKNW HBKNW HOKNS HBKNS HOKP HOKNP
40506380 - -
TypeShape Tap
Handwheel Handle Handle ThreadWith Handle Without Handle MMaterial SSurface Treatment MMaterial MMaterial SSurface Treatment
HOK HOKN
Standard
With Tap
A5056Black Anodize Nylon6 (Black)
SUM22L Black OxideHBK HBKN Without Tap
HOKW HOKNW With TapClear Anodize Nylon 6 (White)
HBKW HBKNW Without TapHOKS HOKNS With Tap
SUS304 - SUS304 SUS304 -- HBKNS Without Tap
HOKP HOKNP Slit With Tap A5056 Black Anodize Nylon6 (Black) SUM22L Black Oxide
QKnurled Knobs
QThick Knurled Knobs
Part Number - L - A
NOB3NOBA4
--
106 - 7
Part Number - d
HOK40HBKNW40HOKP63
---
6812
Part Number Standard Type (Selectable)
Slit Type
H A S D1 Lr h
Slit Type
P B G MMass (g)
TypeD h1 W X Y d1 d2
Hex Socket Head Cap Screw
With Handle Without Handle d M1Reference Tightening Torque
(N · m) Aluminum Stainless Steel
Standard HOK (Black)HBK (Black)HOKW (White)HBKW (White)HOKS (Stainless Steel)Slit TypeHOKP (Black)
HOKN (Black)HBKN (Black)HOKNW (White)HBKNW (White)HOKNS (Stainless Steel)HBKNS (Stainless Steel)
HOKNP (Black)
40 *6 8 8 25 12 13 22 15 6.5 10
1.5
7 4.58.5 4.5 M4
1.5 14.513 18.8
5
50 150
50 *8 10 10 28 13 15 27 18 7.5 11 9 5 1.5 17 87 255
63 *10 12 12 32 14 18 35 22 9 12 11 6 10 5.5 M5 3.0 23 14 20.8 161 460
80 *12 16 - 40 15 25 45 28 12.5 - 30 16 23.8 6 299 855
E * marked sizes are applicable to HOK and HOKN only. EOnly D=40, 50 and 63 are available for Slit Type. EIf d dimensions are not specified, any of the following combinations of D and d is applied by default: 40-8, 50-10, 63-12 or 80-16.
DD
M
A Ll
A S l
d
H
M
L
MA S
H
d
MAT
d
ThreadedType
TappedType
E There may be uneven chrome plating around the threads.
DD
A SH
M
d
d
AT
M
lA L
M
l
d
A SH L
M
ThreadedType
TappedType
E There may be uneven chrome plating around the threads.
Part Number - (MC)
NKMS6 - MC
Alteration Code Spec.
MC
S/2
MC
Adds a tap for a set screw on Tapped Type NKMS (Stainless Steel Type).
EApplicable to M≥6
M MC6 M38 M4
10 M5
QStepped TypeType
MMaterial SSurface TreatmentThreaded
TappedL Dimension Standard L Dimension Configurable
NKB - NKM SUM23 Buff Polished, Chrome Plating
NKOS NKOSF NKMS SUS303NKOS, NKOSF: Brushed FinishNKMS: None
NKBB - NKMB SUM23 Black Oxide
TypeMMaterial SSurface
TreatmentThreadedTapped
L Dimension Standard L Dimension Configurable
NOB - NOM SUM23 Buff Polished, Chrome Plating
NOOS NOOSF NOMS SUS303NOOS, NOOSF: Brushed FinishNOMS: None
NOBB - NOMB SUM23 Black Oxide
QStepped TypeType
MMaterial SSurface TreatmentThreaded
TappedL Dimension Standard L Dimension Configurable
NKBA - NKMA SUM24L Buff Polished, Chrome Plating
NKOSA NKOSAF NKMSA SUS303 Brushed Finish
NKBAB - NKMAB SUM24L Black Oxide
TypeMMaterial SSurface
TreatmentThreadedTapped
L Dimension Standard L Dimension Configurable
NOBA - NOMA SUM24L Buff Polished, Chrome Plating
NOOSA NOOSAF NOMSA SUS303 Brushed Finish
NOBAB - NOMAB SUM24L Black Oxide
Part Number L (Threaded)A
Selection D d T H S lUnit Price
Type M (Coarse) Stationary Configurable in
1mm IncrementNOBANKBA
NOBABNKBAB
NOOSANKOSA
NOMANKMA NOMAB NKMAB NOMSA
NKMSANOOSAFNKOSAF
(Threaded L Dimension Standard)NOBA
NOOSA
NOBAB
Stepped Type
NKBA
NKOSA
NKBAB
(Threaded L Dimension Configurable)
NOOSAF
NKOSAF
(Tapped)
NOMA
NOMSA
NOMAB
NKMA
NKMSA
NKMAB
3 6 10 6~10
5
12 6
5.5 10
5 16 6.5 118 9 1312 13.5 17
4 6 1016 6~16
7
16 8
7.5 13
6 1.29 10.5 1511 12 1717 18.5 23
5 101620 10~20
8
20 10
9 15.5
7.5 1.410 11 17.512 13 19.526 29.5 33.5
6 1016202530 10~30
10
24 12
11 20
10 1.513 14 2315 16 2525 26.5 35
8 16202530 16~3012
30 1614 24
12 215 17 2730 31.5 42
10 20 25 30 40 20~4016
36 2018 31
15 2.520 22 3540 41.5 55
Part Number L (Threaded)D d A T H S l
Unit Price
Type M (Coarse) Stationary Configurable in
1mm Increment NOB NKB NOBB NKBB
NOOS NKOS NOM NKM NOMB
NKMBNOMS NKMS NOOSF NKOSF
(Threaded L Dimension Standard)NOBNOOSNOBBStepped Type
NKBNKOSNKBB
(Threaded L Dimension Configurable)
NOOSF
NKOSF
(Tapped)
NOMNOMSNOMB
NKMNKMSNKMB
3 6 10 16 6~16 12 6 2.5 3 7.5 5 1
4 6 10 16 20 6~20 16 8 3.5 4 9.5 6 1.2
5 10 16 20 25 10~25 20 10 4 5 11.5 7.5 1.4
6 10 16 20 25 30 10~30 24 12 5 6 15 10 1.5
8 16 20 25 30 16~30 30 16 6 8 18 12 2
10 20 25 30 40 20~40 36 20 8 10 23 15 2.5
Alterations
Shaft Bore Dia. Change (H8) + Tapped Hole Machining Shaft Bore Dia. Change (H8) + Keyway + Tapped Hole Machining Square Bore Machining
2-M
h HCH8 KCH8
M
h
Detail of
#SC
C45°
Code HC KC SC
Spec.
Adds an H8 hole at hub center, and two tapped setscrew holes.EComes with one set screw.HC=1mm Increment
Ordering Code HC16
Adds an H8 hole, a key groove and a tapped hole at hub center.EComes with one set screw.KC = Selectable
Ordering Code KC15
Adds a square bore at hub center.EComes with one set screw for Tapped Type.SC=1mm Increment
Ordering Code SC12b
t 0+0.
1
KCH8
KC(H8) b tDimension Tolerance10,11,12 4
±0.01501.8
14,15,16,17 5 2.318,19,20,21 6 2.8
D KC(H8) M40 10,11
550 10,11,12
63 12,14,1516,17 680 16,17,18,19,20,21
SC Tolerance C
10~14 +0.10 0.5
15~23 +0.150 1
D SC40, 50 10~12
63 10~1580 10~23
E Shaft bore is a through-bore. E Not applicable to Slit Type
Part Number - (HC, KC, SC)
HBK50 - HC10
HC(H8) M8~15 M516~22 M623~24 M8
D HC(H8)40 8~1250 10~1563 12~2080 16~24
top related