18020194-connection instruction repeater panel 092014...iris fire alarm panel rx rx rx rx tx tx tx...

Rx RxTx Tx

Module 1Redundant Network

Module 2Redundant Network

IRIS Fire Alarm Panel

Rx

Rx

Rx

Rx

Tx TxTx Tx

+ Tx

+ Rx+ Rx

- Tx

- Tx

- Rx

- Rx

+ Tx

18

02

01

94

Repeater Panel - Instruction Manual

Technical Characteristics:Power Supply: (24 ± 4) VDCMax. consumption: 0.11ACommunication - RS485

Twisted pair cable:- Length - max. 1000m (between repeater - fire panel)

2- Cross Section - 0.5 - 2.5mm

2. Connection Diagram

ATTENTION!Operation with Repeater Panelis supported for the following revisions:

IRIS Fire Alarm PanelLCD PCB Hardware revision: 2.4 and higherMAIN Board Firmware revision: 4.2 and higher

SIMPO Fire Alarm PanelMAIN Board Firmware revision: 2.8 and higher

1. Description of the terminal rows

24 VDC

Loop IN Loop OUT Power Supply

Loop IN - Connect the input line for communicationLoop OUT - Connect the output line for communicationPower Supply - Power supply for the repeater panel: - Use external 24VDC power supply unit; - Use the AUX output of the fire alarm panel.Micro USB - Micro USB input for programming and firmware update

SIMPO Fire Alarm Panel

Micro USB

Repeater Panel

Rx

Rx

Tx Tx