2. connect the switch package contents · 2. connect the switch poe+ access points internet gs516pp...
Post on 15-Aug-2020
7 Views
Preview:
TRANSCRIPT
NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134, USA
NETGEAR INTERNATIONAL LTD Floor 1, Building 3, University Technology Centre Curraheen Road, Cork, T12EF21, Ireland
Installation Guide
16-Port Gigabit Ethernet Unmanaged High-power PoE+ Switch, Model GS516PP24-Port Gigabit Ethernet Unmanaged High-power PoE+ Switch, Model GS524PP
Package contents
• SwitchmodelGS516PPorGS524PP
• Powercord(variesbyregion)
• Rack-mountkit
• Fourrubberfeet
• InstallationguideandInsightflyer
Note: WerecommendthatyouuseaCategory5e(Cat5e)cableorhigher-ratedcableforGigabitEthernetconnections.
1. Register with the NETGEAR Insight app1. SearchforNETGEAR Insightanddownloadthelatestapp.
2. SetupaNETGEARaccountifyoudonothaveone.3. Tapthemenuintheupper-leftcorner.4. TapREGISTER ANY NETGEAR DEVICE.5. Entertheserialnumberlocatedonthebottomoftheswitch,orusethe
cameraonyourmobiledevicetoscantheserialnumberbarcode.6. TapGO.
Theswitchisregisteredandaddedtoyouraccount.YoucannowviewtheswitchintheNETGEARInsightapp.
Note: Becausethisisanunmanagedswitch,youcannotconfigureormanageitinNETGEARInsight.
2. Connect the switch
PoE+accesspointsInternet
GS516PPswitch
Sample connections
PoE+VoIPconferencephones
Router
ModelGS516PPprovidesPoE+(802.3at)poweronall16GigabitEthernetports,withupto30Wtoeachport.ThetotalPoEpowerbudgetfortheswitchis260WacrossallactivePoEports.
ModelGS524PPprovidesPoE+(802.3at)poweronall24GigabitEthernetports,withupto30Wtoeachport.ThetotalPoEpowerbudgetfortheswitchis300WacrossallactivePoEports.
3. Check the LEDsWhenyouconnectthepowercordtotheswitchandplugitintoanelectricaloutlet,theLEDsindicatethestatus.
LED Description
Power
Solid green.Theswitchispoweredonandoperatingnormally.
Off. Powerisnotsuppliedtotheswitch.
Fan
Off.Thefanisworkingcorrectly.
Solid yellow.Thefanisnotworkingcorrectly.
PoEMax
(Thestatusoftheswitch’sPoEbudget)
Off.Sufficient(morethan7Wof)PoEpowerisavailable.
Solid yellow.Lessthan7WofPoEpowerisavailable.
Blinking yellow.Atleastonceduringtheprevioustwominutes,lessthan7WofPoEpowerwasavailable.
LeftportLED
Solid green.1000Mbpslinkonthisport.
Blinking green.1000Mbpsactivityonthisport.
Solid yellow.100Mbpsor10Mbpslinkonthisport.
Blinking yellow.100Mbpsor10Mbpsactivityonthisport.
Off.Nolinkisdetectedonthisport.
RightPortLED
Solid Green.TheportisdeliveringPoEpower..
Off.TheportisnotdeliveringPoEpower.
Solid yellow.APoEfaultoccurred.
Computer
Internet
non-PoE
Note: Thisswitchisdesignedforindooruseonly.Ifyouwanttoconnecttoadevicelocatedoutdoors,theoutdoordevicemustbeproperlygroundedandsurgeprotected,andyoumustinstallanEthernetsurgeprotectorinlinebetweentheswitchandtheoutdoordevice.Failuretodosocandamagetheswitch.
WARNING: Beforeconnectingthisswitchtooutdoorcablesordevices,seehttps://kb.netgear.com/000057103forsafetyandwarrantyinformation.
PoE+zoomcamera
PoE+
PoE+IPcamera
© NETGEAR, Inc., NETGEAR and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any non‑NETGEAR trademarks are used for reference purposes only.
SpecificationsSpecification Model GS516PP Model GS524PP
RJ-45ports 16GigabitEthernetfor1Gbps,100Mbps,and10Mbps.
24GigabitEthernetfor1Gbps,100 Mbps,and10Mbps.
PoE+ports All(1–16) All(1–24)
MaximumPoEbudget 260Wfortheentireswitch 300Wfortheentireswitch
ACpowerinput 100–240V~50/60Hz,5A 100–240V~50/60Hz,6A
Dimensions(WxDxH) 13.0x8.2x1.7in.(330x207x43mm)
15.4x8.7x1.7in.(390x220x43mm)
Weight 5.07lb(2.3kg) 6.37lb(2.89kg)
Operatingtemperature 32–122°F(0–50°C)
Operatinghumidity 10%–90%relativehumidity,noncondensing
Compliance FCCclassA,UL62368-1,CB,CELVD,CEclassA,VCCIclassA,RCMclassA,KC,BSMI
Support and CommunityVisitnetgear.com/supporttogetyourquestionsansweredandaccessthelatestdownloads.
YoucanalsocheckoutourNETGEARCommunityforhelpfuladviceatcommunity.netgear.com.
Regulatory and LegalSiceproduitestvenduauCanada,vouspouvezaccéderàcedocumentenfrançaiscanadienàhttps://www.netgear.com/support/download/.
(IfthisproductissoldinCanada,youcanaccessthisdocumentinCanadianFrenchathttps://www.netgear.com/support/download/.)
ForregulatorycomplianceinformationincludingtheEUDeclarationofConformity,visithttps://www.netgear.com/about/regulatory/.
Seetheregulatorycompliancedocumentbeforeconnectingthepowersupply.
ForNETGEAR’sPrivacyPolicy,visithttps://www.netgear.com/about/privacy-policy.
Byusingthisdevice,youareagreeingtoNETGEAR’sTermsandConditionsathttps://www.netgear.com/about/terms-and-conditions.Ifyoudonotagree,returnthedevicetoyourplaceofpurchasewithinyourreturnperiod.
Donotusethisdeviceoutdoors.ThePoEsourceisintendedforintrabuildingconnectiononly.
PoE considerations
ThePoEpowerthattheswitchsuppliestopowereddevices(PDs)isprioritizedinascendingportorder.IfthepowerrequirementsfortheattachedPDsexceedthetotalpowerbudgetoftheswitch,thePDonthehighest-numberedportisdisabledtomakesurethatthePDsconnectedtothehigher-priority,lower-numberedportsaresupportedfirst.
APDlistedasan802.3atPoE+powereddevicedoesnotnecessarilyrequirethemaximumpowerlimitofthespecification.ManyPDsrequirelesspower,potentiallyallowingallPoE+portstobeactivesimultaneously.
Thefollowingtableshowsthestandardpowerrangescalculatedwiththemaximumcablelengthof328feet(100meters).
DeviceClass
CompatiblePoEstandard
ClassDescription MaximumPowerSuppliedbytheSwitch
PowerDeliveredtothePD
0 PoEandPoE+ Defaultpower(full) 0.44W 0.44W–12.95W
1 PoEandPoE+ Verylowpower 4.0W 0.44W–3.84W
2 PoEandPoE+ Lowpower 7.0W 3.84W–6.49W
3 PoEandPoE+ Midpower 15.4W 6.49W–12.95W
4 PoE+only Highpower 30.0W 12.95W–25.5W
IfadevicereceivesinsufficientPoEpowerfromtheswitch,considerusingashortercable.
PoE troubleshooting
HerearesometipsforcorrectingPoEproblemsthatmightoccur:
• IfthePoEMaxLEDissolidyellow,disconnectoneormorePoEdevicestopreventPoEoversubscription.
• Foreachpowereddevice(PD)thatisconnectedtotheswitch,theassociatedPoELEDontheswitchlightssolidgreen.IfthePoELEDlightssolidyellow,aPoEfaultoccurredandPoEhaltedbecauseofoneoftheconditionslistedinthefollowingtable.
PoEFaultCondition PossibleSolution
APoE-relatedshortcircuitoccurredontheport.
TheproblemismostlikelywiththeattachedPD.ChecktheconditionofthePD,orrestartthePDbydisconnectingandreconnectingthePD.
ThePoEpowerdemandofthePDexceededthemaximumlevelthattheswitchpermits.Themaximumlevelis15.4WforaPoEconnectionand30WforaPoE+connection.
ThePoEcurrentontheportexceededtheclassificationlimitofthePD.
ThePoEvoltageoftheportisoutsidetherangethattheswitchpermits
Restarttheswitchtoseeiftheconditionresolvesitself.
Mount the switch in a rack
Werecommendthatyouusethebracketsandscrewsthatcamewiththeswitch.
1. Attachthesuppliedmountingbracketstothesideoftheswitch.
2. Insertthesuppliedsmallscrewsthrougheachbracketandintothebracketmountingholesintheswitch.
3. TightenthescrewswithaNo.1Phillipsscrewdrivertosecureeachbracket.
4. Alignthemountingholesinthebracketswiththeholesintherack,andinserttheprovidedpan-headscrews(youcanchooseamongtwotypesofpan-headscrews)withnylonwashersthrougheachbracketandintotherack.
5. TightenthescrewswithaNo.2Phillipsscrewdrivertosecuremountingbracketstotherack.
May2020
top related