2) ethernet on mini link

MINI-LINK TN Operation and Maintenance

ETHERNET ON MINI-LINK TN R4Dan McNamara LMI

Section 1 : Common Configuration

Overview: We connect Lan ports. We create and connect Wan ports We join them using either Ethernet private line or Ethernet Switch (NPU3B)

1

MINI-LINK TN Operation and Maintenance

Ethernet switch has to be turned on before use.

2

MINI-LINK TN Operation and Maintenance

Connect Lan port for :

A). PRIVATE LINE: Right Click – configure – connect to Layer 1

3

MINI-LINK TN Operation and Maintenance

B). ETHERNET SWITCH: Right Click–configure–connect to port No.

4

MINI-LINK TN Operation and Maintenance

Section 2 : Creating the WANs1: Ethernet over PDH ( PDH-IME Wan)- right click on PDH-IME–configure – connect to – Ethernet(Wan interfaces now visible)

Create Capacity for PDH-IME -right click – configure – capacity (This is where you pick the Board ( LTU/MMU )and number of E1’s)

5

MINI-LINK TN Operation and Maintenance

2: Native Ethernet

Create RL-IME WAN

6

MINI-LINK TN Operation and Maintenance

3: Ethernet over SDH Create VCG WAN

Enable Rau

7

MINI-LINK TN Operation and Maintenance

Connect VCG to Ethernet

8

MINI-LINK TN Operation and Maintenance

Configure Capacity

Right click on vcg – configure capacity

9

MINI-LINK TN Operation and Maintenance

Right click on vcg – configure Ethernet over SDH

Section 3 : Using the WAN ports

Connect the Wan port to Layer 1 for Ethernet private line:

10

MINI-LINK TN Operation and Maintenance

To Port No. for Ethernet switch:

a). Ethernet Private Line.

11

MINI-LINK TN Operation and Maintenance

b). Ethernet Switch

12

MINI-LINK TN Operation and Maintenance

13