2- ports and connectorppt

PORTS AND CONNECTORS

Made By : Gagandeep SinghCompTIA A+ Certified

PORTS ON MOTHERBOARD PS/2 PORT SERIAL PORT PARALLEL PORT VGA PORT DVI PORT USB PORT MINI DINS LAN PORT MODEM RJ-11 JACK FIREWIRE PORT

TABLE OF CONTENT

Identifying Game Controller Cable Connector. Identifying External Audio Cable Connector. Identifying Male/Female Connectors. Identifying IDE Data Bus. Identifying SATA Hard Disk Drive Data Bus. Identifying Floppy Disk Drive Data Bus.

TABLE OF CONTENT

PORTS ON MOTHERBOARD

PS/2 PORT

Port has 6-pins.

It is a female port.

It require 6-pin male connector.

The mouse is connected with a PS-2 mini-DIN connector. Green is for mouse. The keyboard is connected with a PS-2

mini-DIN Connector. Purple is for Keyboard.

PS/2 PORT

SERIAL PORT

Device is capable of Receiving one bit at a time.

It is a 9 pin male port.

SERIAL PORT CONNECTOR

Uses either a 9-pin or 25-pin connector and a cylindrical cable much less susceptible to interference. Can be up to 25 feet long.

It require 9 pin female connector.

Use to connect External modems and old mouse.

SERIAL PORT

PARALLEL PORT

Device is capable of receiving eight bit at a time. It is a 25 pin female port. We require 25 pin male connector. Port running at about 150Kb/sec. Dot matrix printers are connected. Utilize a male DB-25 pin connector on the computer and a male 36-pin Centronics cable at the printer end. Most cables will be no more than ten feet, to reduce electronic interference along the cable.

VGA PORT

Used to connect the monitor to the computer.

VGA stands for Video Graphics Array.

VGA offers clean images at higher resolutions.

VGA PORT

It is a 15 female port.

It require 15 male connecter.

We can connect devices like monitors, projectors.

DVI PORT

DVI Stands for Digital Visual Interface.

Provide very high visual quality on digital display devices.

LCD computer displays and digital projectors.

It has 24 female pins. It require 24 pin male connector.

DVI PORT

USB PORT

A protocol for transferring data to and from digital devices. USB stands for Universal Serial Bus. A single USB port can be used to connect up to 127 peripheral devices.

It has three versions of USB. Version Speed USB 1.1 12 MBPS USB 2.0 480 MBPS USB 3.0 800 MBPS

USB PINS

DEVICES FOR USB

MINI- DINS

Audio connectors are used to affix cables to other audio equipment.

Connector includes 3.5mm pins that can be inserted into a socket.

This setup is used for audio, microphone and auxiliary output.

LAN PORT

This port is for LAN connection. It has 8 pins. Ethernet uses a bus and supports data transfer rates of 10 Mbps. Connector RJ45 is used.

MODEM RJ-11 JACK

Short for Registered Jack-11. A four-wire connector used to connect telephone.

RJ-11 connectors are also used to connect local-area networks (LANs).

RJ-11 is used for dial up connection.

FIREWIRE PORT

A type of cabling technology for transferring data to and from digital devices at high speed.

Also known as IEEE 1394.

IEEE 1394 a devices are running on 400 Mb/s. (6 pins) , half-duplex

IEEE 1394 b devices are running on 600-800 Mb/s. (9 pins) , full-duplex

FIREWIRE PORT

Digital cameras and memory card readers connect to the computer over FireWire.

Digital audio and video devices, external hard drives, high-performance DVD burners.

Identifying Game Controller Cable Connector

Identifying External Audio Cable Connector

Identifying Male/Female Connectors

A Male Connector

A Female Connector

Identifying IDE Data Bus

Identifying SATA Hard Disk Drive Data Bus

Identifying Floppy Disk Drive Data Bus