2013–2014 membership directory - c.ymcdn.comc.ymcdn.com/sites/ · pdf filemembership...

2013–2014

MEMBERSHIPDIRECTORYAND RESOURCE GUIDE

frontcover.pdf 1 4/12/13 10:51 AM

CSDA Mission

The mission of the Concrete Sawing & Drilling Association is to promote the use of professional specialty sawing and drilling contractors and their methods. In support of this goal, the CSDA Code of Ethics demands that members pursue the highest standards of safety, quality and integrity. A second objective is to provide a forum in which members can share their ideas, needs and concerns in a constructive framework to further enhance concrete sawing and drilling technologies.

Concrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560 Clearwater, FL 33762Tel: 727-577-5004www.csda.org

| 12013–2014 ConCrete Sawing & Drilling aSSoCiation • MeMbership Directory

Section 1: Member Resources

Officers 4

Board of Directors 4

Committees 5

Presidents 5

Section 2: Membership

North American Contractors 9

United States 9

Canada 20

Overseas Contractors 21

Manufacturers 23

Distributors 25

Affiliates 26

Reciprocal Associations 28

Member Benefits 29

Membership Application 30

Section 3: Resource Guide

Table of Contents

Publication date: June 2013. For the most up-to-date information, visit www.csda.org.

CSDA ConventionMarch 11–15, 2014The Westin La Poloma Resort & Spa Tucson, Arizona www.csda.org

Section 1: Member Resources

A. Officers

B. Board of Directors

C. Committees

D. Presidents

4 | The AssociATion of cuTTing ProfessionAls • www.csda.org

PresidentJudith O’DayTerra Diamond Industrial1910 South Fremont DriveSalt Lake City, UT 84104Tel: 801-977-0054Email: joday@terradiamond.com

Vice PresidentKevin BaronWestern Saw, Inc.3200 Camino Del SolOxnard, CA 93030Tel: 805-981-0999Email: kevinb@westernsaw.com

Secretary/TreasurerMike OrzechowskiDITEQ Corporation1250 NW Main StreetLee’s Summit, MO 64086Tel: 866-688-1032Email: mikeo@diteq.com

Past PresidentJim DvoratchekHard Rock Concrete Cutters, Inc.601 Chaddick DriveWheeling, IL 60090Tel: 847-699-0010Email: jimd@hardrockconcretecutters.com

Executive DirectorPatrick O’BrienConcrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560Clearwater, FL 33762Tel: 727-577-5004Email: pat@csda.org

(Terms expiring 2014)

Kevin BaronWestern Saw, Inc.3200 Camino Del SolOxnard, CA 93030Tel: 805-981-0999Email: kevinb@westernsaw.com

Tim BeckmanCutting Edge Services Corp.1535 Old S.R. 74Batavia, OH 45103Tel: 513-388-0199Email: beckman@cuttingedgeservices.com

Paul DeAndreaDeAndrea Coring & Sawing, Inc.9630 Dallas StreetHenderson, CO 80640Tel: 303-422-3885Email: paul@deandreacoring.com

Steve GarrisonHilti, Inc.6601 Darin WayCypress, CA 90630Tel: 714-230-7410Email: steve.garrison@hilti.com

Donna HarrisConcrete Renovation, Inc.6600 Randolph BoulevardSan Antonio, TX 78233Tel: 210-653-6120Email: donna.cri@sbcglobal.net

Ron RapperHusqvarna Construction Products N.A.17400 W 119th StOlathe, KS 66061Tel: 913-928-1007Email: ron.rapper@husqvarna.com

(Terms expiring 2015)

Ty ConnerAustin EnterprisePO Box 81926Bakersfield, CA 93380Tel: 661-589-1001Email: tconner@austin-enterprise.com

Matt DragonGSSI, Inc.12 Industrial WaySalem, NH 03079Tel: 603-681-2027Email: dragonm@geophysical.com

Matthew FinniganNational Concrete Cutting Inc.7715 Pacific Highway EastMilton, WA 98354Tel: 800-551-0511Email: matthewf@nationalconcretecuttinginc.com

Mike GreeneGreene’s, Inc.1065 W 750 SWoods Cross, UT 84087Tel: 801-292-6699Email: mikeg@greenesinc.com

Greg LipscombDiamond Products Limited333 Prospect StElyria, OH 44035Tel: 919-369-2496Email: glipscomb@diamondproducts.com

Sid KilgoreDixie Diamond Manufacturing205 Buxton CtLilburn, GA 30047Tel: 770-921-2464Email: skilgore@dixiediamond.com

officers board of directors

CERTIFICATIONPatrick Harris (Chair)Paul DeAndrea (Vice-chair)Patti AustinTim BeckmanJim DvoratchekDonna HarrisJack SondergardKellie VazquezDoug Walker

CONVENTIONKevin Baron (Chair)Patrick O’Brien (Vice-chair)Judith O’Day

ELECTIONDoug Walker (Chair)Mike Greene (Vice-chair)Patti AustinKevin BaronKraig BaronSid KilgoreMike Nelson

FINANCEMike Orzechowski (Chair)Kevin BaronJim DvoratchekSteve GarrisonPatrick O’BrienJudith O’Day

IMAGINGMark DeSchepper Chair)Emily Hammer (Vice-chair)Tony BrunetteGlen DeKokMatt DragonRick NorlandMike OrzechowskiMarty Rack

INTERNATIONALPatrick O’Brien (Chair)Judith O’Day (Vice-chair)

INSURANCE SUB-COMMITTEESteve Garrison (Chair)Tim BeckmanDoug Walker

LONG-RANGE PLANNINGJudith O’Day (Chair)Jim Dvoratchek (Vice-chair)Kevin BaronPatrick O’Brien

MANUFACTURERKevin Baron (Chair)Steve Garrison (Vice-chair)CSDA Manufacturer Members

MARKETINGSid Kilgore (Chair)Greg Lipscomb (Vice-chair)Steve AndersonKevin BaronPeter BigwoodTy ConnerMatt DragonSid KilgoreMike NelsonKevin Warnecke

MEMBERSHIPTy Conner (Chair)Donna Harris (Vice-chair)Peter BigwoodMatt DragonMike GreeneLarry LiddleMike NelsonErin O’Brien

NEXT GENERATIONMatt Dragon (Chair)Sid Kilgore (Vice-chair)CSDA Next Gen Members

POLISHINGAndy Bowman (Chair)Doug Walker (Vice-chair)Mark Michaels

SAFETYDan Cowperthwait (Chair)Matthew Finnigan (Vice-chair)Patti AustinJim DvoratchekSteve GarrisonMike GreeneDonna HarrisMike IiamsGary JohnsonGreg LipscombMark MichaelsMike OrzechowskiRick NorlandRon RapperJack SondergardAndy VargaKellie VazquezKevin Warnecke

STANDARDS & SPECIFICATIONSMike Orzechowski (Chair)Tim Beckman (Vice-chair)Mark DeSchepperDan CowperthwaitMark MichaelsJack SondergardKevin Warnecke

TRAININGKevin Warnecke (Chair)Ron Rapper (Vice-chair)Patti AustinTim BeckmanDan CowperthwaitPaul DeAndreaSteve GarrisonDonna HarrisPatrick HarrisRick NorlandMike OrzechowskiJack Sondergard

1972 A.C.Peterson1972, 1973, 1974 Lester F. Kuzmick1975 G.H. “Dek” Dekker1976 Steve Schipper1977 Chuck Tackett1978, 1979 Ted Page1980 Ken Barnes1981 Barry Woods1982 Ron Van Zee1983 Ken Major1984, 1985 Jim Doolin1986 Ralph Mattiola1987 Larz Smith1988 Jack Johnson1989, 1990 Bill Solberg1991, 1992 Steve Garrison1993 Richard Long1994 Greg Broom1995 Daniel Vander Mey1996 David Lessor1997 Weldon Birch1998 Rick Norland1999, 2000 Jim Dvoratchek2001, 2002 Roger Allen2003, 2004 Ted Johnston2005, 2006 Susan Hollingsworth2007, 2008 Tom Stowell2009, 2010 Doug Walker2011, 2012 Jim Dvoratchek 2013 Judith O’Day

presidentscommittees

CSDA Training 2013–2014

Online Training Program www.csdatraining.com 24/7

World of Concrete January 20–24, 2014 Las Vegas, NV

Concrete Polishing November 7&8, 2013 Bakersfield, CA

Session Locations:

Operator Certification November 4–9, 2013 Clearwater, FL

The Association of Cutting Professionals

Section 2: Membership

A. North American Contractors

United States

Canada

Mexico

B. Overseas Contractors

C. Manufacturers

D. Distributors

E. Affiliates

F. Reciprocal Associations

G. Member Benefits

H. Membership Application

Operator Certification

CSDA’s Operator Certification is a comprehensive six-day program that combines detailed classroom instruction with on-slab demonstration and evaluation of advanced concrete cutting techniques. Safety, proper equipment use and efficiency are emphasized.

CSDA certified operators are recognized industry-wide for their proficiency in the full range of sawing and drilling applications.

Minimum Requirements

• Successful completion of CSDA Cutting Edge, Slab Sawing & Drilling 101, Wall Sawing 101 or Wire Sawing 101

• Three years field experience (4,500 hours)

• Successful completion of 10-hour OSHA Construction Safety course

• No more than one lost-time injury within the last three years

• Unrestricted driver’s license

• Negative drug test within 30 days of taking the course

Certifications

Companies in this directory who have invested time and money to send their operators through the CSDA Operator Certification course are designated with the logo.

Operator Certification November 4–9 Clearwater, Florida

Company Certification

The CSDA Company Certification Program is the first of its kind in the industry. This 3-tier program has been created for cutting contractors to provide owners, architects, engineers, general contractors and government officials with a valuable pre-qualification tool that acknowledges sound business practices. It is available to all sawing and drilling contractors.A company must meet the following criteria to achieve certification:

Companies in this directory who have invested time and money to meet the requirements of this program and have successfully completed the application process are designated with a logo that corresponds to the level of certification achieved.

Level 1

• Meet the basic safety, financial and insurance requirements of the industry

• Successfully pass a written application review

Level 3

• Have a total quality management system in place

• Provide evidence it is committed to a high standard of safety and sound business practices

• Pass an industry-specific quality audit, conducted onsite, which mirrors the internationally recognized standard ISO9000

Level 2

• Undertake sound operational and financial best practices in addition to the criteria set out for the first level

• Provide evidence it has took part in basic training or certification programs to better its employees and the company as a whole

• Successfully pass a written application review

The CSDA Company Certification Program provides me with documentation that I can present to customers and general contractors. I can prove that the company not only

performs safe and efficient cutting work, but also uses sound business practices.”

—Tim Beckman, owner of Cutting Edge Services Corp.

Alabama

International Drilling & Sawing, Inc. Tim RudderPO Box 250013Montgomery, AL 36125Tel: 334-288-2355Email: tr@idscuts.comwww.idscuts.comServices: FS, CD, WL, WR, SD, CC, GPR

Penhall Company - Birmingham Clark Thompson1890 Woodlands Industrial DrTrussville, AL 35173Tel: 205-951-0041Email: cthompson@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Prather Concrete Cutting, Inc. Tracy HeatonPO Box 4Cusseta, AL 36852Tel: 334-756-2668Email: theaton@prathercutting.comwww.prathercutting.comServices: FS, CD, WL, WR, SD

Alaska

Alaska Concrete Sawing, Inc. Mathew Chambers6831 Debarr RdAnchorage, AK 99504Tel: 907-338-3300Email: acsinc@ak.netServices: FS, CD, WL, SD, CC

Arizona

Diamondback Concrete Cutting, Inc. Kyle Rea6216 E Janice WayScottsdale, AZ 85254Tel: 602-309-3314Email: dcc1@cox.netServices: FS, CD, WL

Floor Demo LLC Dennis Shy1626 W 12th PlaceTempe, AZ 85281Tel: 480-209-3449Email: dennis@flooringdemolition.comwww.flooringdemolition.com

Penhall Company - Phoenix Nate Keller3301 E Wood StPhoenix, AZ 85040Tel: 480-967-5029Email: nkeller@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Tucson Michael A. Smith4847 N Daisy Dawn Pl Ste 125Tucson, AZ 85705Tel: 520-297-9766Email: msmith@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

California

Austerman, Inc. Bob Austerman1960 Channel DrWest Sacramento, CA 95691Tel: 916-371-1031Email: bausterman@austermaninc.comwww.austermaninc.comServices: FS, CD, WL, SD, CC, GPR

Austin Enterprise Ty ConnerPO Box 81926Bakersfield, CA 93380Tel: 661-589-1001Email: tconner@austin-enterprise.comwww.austin-enterprise.comServices: FS, CD, WL, SD, CC

Big K Concrete Coring, Inc. Corey KeifnerPO Box 1133Sunland, CA 91041Tel: 818-771-0777Email: corey@bigkcuts.comwww.bigkcuts.comServices: FS, CD, WL, SD

Break Away Concrete Cutting, Inc. Kit L. Sanders2025 Stone AveSan Jose, CA 95125Tel: 408-920-9668Email: kls@bacccorp.comwww.bacccorp.comServices: FS, CD, WL, SD, GPR

Cal West Concrete Cutting, Inc. Rick Cissell1153 Vanderbilt CirManteca, CA 95337Tel: 209-823-2236Email: rickc@calwestcci.comwww.calwestconcretecutting.comServices: FS, CD, WL, WR, SD, GPR

Cal West Concrete Cutting, Inc. Weldon Birch3000 Tara CtUnion City, CA 94587Tel: 510-656-0253Email: mwelb@calwestcci.comwww.calwestconcretecutting.comServices: FS, CD, WL, WR, SD, GPR

California Cut & Core, Inc. Kent R. Hicks11359 Sunrise Gold Cir Ste ARancho Cordova, CA 95742Tel: 916-853-9224Email: khcacore@sonic.netwww.calcutcore.comServices: FS, CD, WL, SD, CC

CENCAL Demolition, Inc. Michael Gonzales3299 S Cedar AveFresno, CA 93725Tel: 559-291-3366Email: mikeg@cencaldemo.comwww.cencaldemo.comServices: FS, CD, WL, WR, SD, CC, GPR, P

Concrete Wall Sawing Co. Kenny BarnesPO Box 2419San Leandro, CA 94577Tel: 510-483-8440Email: kenny@cwsco.comwww.cwsco.comServices: FS, CD, WL, WR, SD, CC

CT Concrete Cutting, Inc. Chris Tompkins26341 Jefferson Ave, Suite BMurrieta, CA 92562Tel: 951-698-7745Email: ct@ctconcretecutting.com

Del Secco Diamond Core & Saw, Inc. Jeanne Del Secco31739 Knapp StHayward, CA 94544Tel: 510-475-6313Email: jeanne@delsecco.comServices: FS, CD, WL, SD, CC, GPR

Fast Forward Concrete Cutting Jeff Hale7738 Burnet AveVan Nuys, CA 91405Tel: 800-648-6469Email: jeff@cut-demo.comwww.fastforwardconcretecutting.comServices: FS, CD, WL, SD

G Seven Geno Cotrone19751 Hwy 108Sonora, CA 95370Tel: 209-743-2529Email: geno.cotrone@yahoo.comServices: FS, CD, WL, WR, SD, CC, GPR, P

Housley Demolition Co., Inc. Brian Kleinkopf1804 N. Kelsey StreetVisalia, CA 93291Tel: 559-909-5212Email: brian@housleydemo.comwww.housleydemo.com

north american contractors

SERVICES: Flat Sawing (FS), Core Drilling (CD), Wall Sawing (WL), Wire Sawing (WR), Selective Demolition (SD), Curb Cutting (CC), Ground Penetrating Radar (GPR), Concrete Polishing (CP)

Kroeker IncJay Harvey4627 C Chestnut AveFresno, CA 93725Tel: 559-237-3764E-mail: jayh@kroekerinc.comwww.kroekerinc.com Services: FS, CD, WL, SD, CC

Lombardo Diamond Core Drilling Co., Inc. Rick Long2225 De La Cruz BlvdSanta Clara, CA 95050Tel: 408-727-7922Email: rslong@lombardodrilling.comwww.lombardodrilling.comServices: FS, CD, WL, WR, SD, CC

Pacific Coast Concrete Cutting, Inc. Rick Engelhardt3042 Cordua CtSimi Valley, CA 93063Tel: 805-581-1360Email: rick@pacificcutncore.comwww.pacificcutncore.comServices: FS, CD, WL, WR, SD, CC, GPR

Pacific Coast Cutters, Inc. Catherine Stallman450 Lakeville St Ste BPetaluma, CA 94952Tel: 707-765-0661Email: pcc@pacificcoastcutters.comwww.pacificcoastcutters.comServices: FS, CD, WL, WR, SD

Penhall Company - Anaheim Joe Morello1801 Penhall WayAnaheim, CA 92801Tel: 714-772-6450Email: jmorello@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Burbank Jeff Kleeman255 S Flower StBurbank, CA 91502Tel: 818-562-1250Email: jkleeman@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Corporate George Bush1801 Penhall WayAnaheim, CA 92801Tel: 714-772-6450Email: gbush@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Los Angeles Ralph Mercado14801 S Avalon BlvdGardena, CA 90248Tel: 310-225-6690Email: rmercado@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Oakland Scott Hustad13750 Catalina StSan Leandro, CA 94577Tel: 510-357-8810Email: shustad@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Sacramento Chris Marr8416 Specialty CirSacramento, CA 95828Tel: 916-386-1589Email: cmarr@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - San Bernardino Rick Viefhaus841 Iowa AveRiverside, CA 92507Tel: 951-369-2800Email: rviefhaus@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - San Diego Keith Martin5775 Eastgate DrSan Diego, CA 92121Tel: 858-550-1111Email: kmartin@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Santa Clara Scott Hustad696 Walsh AveSanta Clara, CA 95050Tel: 408-970-9494Email: shustad@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

PG Cutting Services Juan GarciaPO Box 695Lake Elsinore, CA 92531Tel: 951-245-6464Email: juan.garcia@pgcutting.comwww.pgcutting.comServices: FS, CD, WL, WR, SD, GPR

Prime Cuts Concrete Sawing & Coring Shane Floyd17970 Lakeshore Dr Ste A&BLake Elsinore, CA 92530Tel: 951-245-6646Email: shanefloyd_primecuts@yahoo.com

R.J. Allen, Inc. Andrew Allen10392 Stanford AveGarden Grove, CA 92840Tel: 714-539-1022Email: andy@rjalleninc.comwww.rjalleninc.comServices: FS, CD, WL, SD, CC

Safe2core, Inc. Antonio Guzman3851 Charter Park Drive, Ste MSan Jose, CA 95136Tel: 408-266-7000Email: antonio@safe2core.comwww.safe2core.com

Spartan Concrete & Asphalt Cutting, Inc. Mike ValkisPO Box 1763Palm Springs, CA 92263Tel: 760-251-8095Email: lvalkis@spartanconcretecutting.comwww.spartanconcretecutting.comServices: FS, CD, WL, SD, GPR

Wright Sawing & Breaking Amarie WrightPO Box 7715Ventura, CA 93006Tel: 805-658-1815Email: wsandb@sbcglobal.netServices: FS, CD, WL, SD

Colorado

DeAndrea Coring & Sawing, Inc. Paul DeAndrea9630 Dallas StHenderson, CO 80640Tel: 303-422-3885Email: paul@deandreacoring.comwww.deandreacoring.comServices: FS, CD, WL, WR, SD, CC, GPR

Diamond Drilling & Sawing Co. Henk Dykhouse1157 S Bannock StDenver, CO 80223Tel: 303-733-3741Email: henkd@ddsccolorado.comwww.ddsccolorado.comServices: FS, CD, WL, WR, SD

Penhall Company - Denver Scott Whalen1385 Umatilla StDenver, CO 80204Tel: 303-934-3866Email: swhalen@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Russ T. Diamonds, Inc. Russ ThompsonPO Box 21647Denver, CO 80221Tel: 303-810-7082Email: russ@russtdiamonds.comwww.russtdiamonds.comServices: FS, CD, WL, WR, SD

Connecticut

Gratton Concrete Sawing & Drilling, LLC Roger Gratton198 Angel RdPomfret Center, CT 06259Tel: 860-974-0670Email: rogergratton1970@gmail.comServices: FS, CD, WL, SD

Pro Cut, Inc. Ben Ulrich26 S Canal StPlainville, CT 06062Tel: 860-620-0171Email: bulrich@procutinc.comwww.procutinc.comServices: FS, CD, WL, WR, CC

Florida

Accu-Cut Concrete Services, Inc. John J. Robinson IIIPO Box 244Palm Harbor, FL 34682Tel: 727-787-4843Email: accucut@tampabay.rr.comServices: FS, CD, WL, WR

Ace Contracting Enterprises, Inc. Keith Thompson3035 NE 21st Way Ste 6Gainesville, FL 32609Tel: 352-372-9878Email: keith@acecontractinginc.comwww.acecontractinginc.comServices: FS, CD, WL, SD, CC

Ace Contracting Enterprises, Inc. Robert N. DakePO Box 896Safety Harbor, FL 34695Tel: 727-725-5513Email: acecontracting@verizon.netwww.acecontractinginc.comServices: FS, CD, WL, SD, CC

Big T Mid Florida Dave Hazard561 Old Geneva RdGeneva, FL 32732Tel: 407-349-5003Email: bigtmidflorida@aol.comwww.bigtmidfl.comServices: FS, CD, WL, SD, CC

Concrete Cutting & Breaking Co. Ed Gushwa215 Taft Vineland RdOrlando, FL 32824Tel: 407-257-0274Email: edgushwa@yahoo.comwww.concut.comServices: FS, CD, WL, WR, SD, CC

Construction Debris Removal, Inc. Vernon D. Keith1535 SR 207St. Augustine, FL 32086Tel: 904-471-9709Email: cdrdemo2@bellsouth.netwww.cdrdemo.com

Garrard Building Contractors, LLC Keith Hall5578 Commercial BlvdWinter Haven, FL 33880Tel: 863-585-3624Email: keith.hall@garrardinc.comwww.garrardinc.comServices: FS, WL, SD, CC

International Drilling & Sawing, Inc. Marty Wooten4522 Saufley Field RdPensacola, FL 32526Tel: 850-470-0755Email: mwoot59@hotmail.comwww.idscuts.comServices: FS, CD, WL, WR, SD, CC, GPR

Speedy Concrete Cutting of Central Florida, Inc. John Gunther1000 Charles StLongwood, FL 32750Tel: 800-556-5153Email: john.gunther@speedycon.comwww.speadycon.com

Speedy Concrete Cutting of Tampa, Inc. Jason Ferguson3212 N 40th St Ste 106BTampa, FL 33605Tel: 888-716-2888Email: jason.ferguson@speedycon.comwww.speadycon.com

Speedy Concrete Cutting, Inc. Todd Barna2579 NW 19th StFt. Lauderdale, FL 33311Tel: 954-730-7200Email: todd.barna@speedycon.comwww.speadycon.com

Georgia

Dixie Concrete Cutting Co., Inc. Greg Broom5297 Port Blvd SCollege Park, GA 30349Tel: 404-761-1100Email: gregoryb54@aol.comServices: FS, CD, WL, WR, SD, CC, GPR

Penhall Company - Atlanta Daniel Behen6940 Oak Ridge Pkwy SWAustell, GA 30168Tel: 770-941-3401Email: dbehen@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Speedy Concrete Cutting of Georgia, Inc. Daniel Mounts411 C Telfair RdSavannah, GA 31415Tel: 877-773-3351Email: daniel.mounts@speedycon.comwww.speadycon.com

Hawaii

Pacific Concrete Cutting & Coring, Inc. Thomas BrainerdPO Box 4408Kailua-Kona, HI 96745Tel: 808-960-6567Email: info@pccchawaii.comwww.pccchawaii.comServices: FS, CD, WL, WR, SD, CC, GPR

Pacific Concrete Cutting & Coring, Inc. Eli BrainerdPO Box 662261Lihue, HI 96766Tel: 808-245-7171Email: info@pccchawaii.comwww.pccchawaii.comServices: FS, CD, WL, WR, SD, CC, GPR

Penhall Company/Concrete Coring Company of Hawaii John Neff99-1026 Iwaena StAiea, HI 96701Tel: 808-488-8222Email: jneff@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Illinois

Chicago Cut Concrete Cutting Tiffany Phillips141 W. Jackson # 1734Chicago, IL 60604Tel: 312-813-3122Email: chicagocutconcretecutting@gmail.com

North AmericAN coNtrActors

Cobra Concrete Cutting Services Co. Daniel Foley2416 E Oakton StArlington Heights, IL 60005Tel: 773-775-1111Email: danfoley@cobraconcrete.comwww.cobraconcrete.comServices: FS, CD, WL, WR, SD, CC

Custom Concrete Cutting Stacy Houck6818 Waterford DriveTel: 815-790-1178Email: customconcretecutting@comcast.net

Diamond Coring Co., Inc.Anthony Cappello, Jr. 11800 S Ewing AveChicago, IL 60617Tel: 773-978-5000E-mail: info@diamondcoring.comWebsite: www.diamondcoring.com

Gronemeier Concrete Cutting, Inc.Catherine Gronemeier22 White PlBloomington, IL 61701Tel: 309-829-7991Email: cathy@gronemeier.comWebsite: www.gronemeier.com

Hard Rock Concrete Cutters, Inc. Jim Dvoratchek601 Chaddick DrWheeling, IL 60090Tel: 847-699-0010Email: jimd@hardrockconcretecutters.comwww.hardrockconcretecutters.comServices: FS, CD, WL, WR, SD, CC, GPR

Interstate Curb & Concrete Cutting, Inc. Steven R. Frech1466 N Tanglewood AvePalatine, IL 60067Tel: 847-776-8030Email: curbcut@comcast.netwww.interstateccc.comServices: FS, CD, WL, CC, GPR

PAB Services, Inc. Peggy BrownPO Box 6614Rockford, IL 61125Tel: 815-399-7770Email: pabconcrete@mchsi.comServices: FS, CD, WL, CC, SD, P

Penhall Company - Champaign Michael Long2601 N Cardinal RdChampaign, IL 61822Tel: 217-351-9461Email: mlong@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Quick Cuts Concrete Cutting Services, LLC Samantha Smith858 Natalie WayBelvidere, IL 61008Tel: 815-547-7018Email: ssqwkcuts@me.com

Roughneck Concrete Drilling & Sawing Karen Elin Johnson8400 Lehigh AveMorton Grove, IL 60053Tel: 847-966-6666Email: karen@roughneck1.comwww.roughneck1.comServices: FS, CD, WL, WR, SD, GPR

Indiana

FSPS, LLC Darrell Cox9268 S 400 EMarkleville, IN 46056Tel: 765-215-0638Email: dcoxgc@hotmail.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Indianapolis Cory Pastotnik5440 Rock Hampton CtIndianapolis, IN 46268Tel: 317-875-7601Email: cpastotnik@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

The Concrete Surgeons, Inc. John Serban4761 Industrial PkwyIndianapolis, IN 46226Tel: 800-822-3844Email: jds@concretesurgeons.comwww.concretesurgeons.comServices: FS, CD, WL, WR, SD

Ace Concrete Cutting Ted Callahan715 49th StMarion, IA 52302Tel: 319-447-0223Email: tedcall@aceconcretecutting.net

AeroSaw, Inc. Mike Hanson3466 Dolphin Dr SEIowa City, IA 52240Tel: 319-337-8811Email: mhanson.aerosaw@yahoo.comwww.tomlinson-cannon.comServices: FS, CD, WL, WR, SD, CC

Henriksen Contracting, LLC Charlie Henriksen3754 SE Capitol CirGrimes, IA 50111Tel: 515-986-4243Email: charlie@henriksencontracting.comwww.henriksencontracting.comServices: FS, CD, WL, SD, CC

Kansas

M6 Concrete Cutting & Coring Jamey Johnston1030 S McComas StWichita, KS 67213Tel: 316-263-7251Email: jameyj@conacc.comwww.conacc.comServices: FS, CD, WL, WR, SD

M6 Concrete Cutting & Coring NE Kansas Wesley MyersPO Box 18Andore, KS 67002Tel: 785-410-3340Email: wesmyers@live.comwww.conacc.comServices: FS, CD, WL, WR, SD

Precision Cutting & Coring, LLC Michael Iiams4439 Shawnee DrKansas City, KS 66106Tel: 913-681-9050Email: mike@pcckc.com

Rick’s Concrete Sawing, Inc. James R. MannPO Box 5634Topeka, KS 66605Tel: 785-862-5400Email: ricksconcrete@aol.comwww.ricksconcretesawing.comServices: FS, CD, WL, CC

Kentucky

Capitol Drilling & Sawing of KY, Inc. John B. Joest, Jr.4700 Bardstown RdElizabethtown, KY 42701Tel: 270-765-7377Email: jbjoest@callcapitol.comwww.capitoldrillingky.comServices: FS, CD, WL, WR, SD

Taylor’s Concrete Cutting Services, LLC Ron TaylorPO Box 830Franklin, KY 42135Tel: 270-598-9400Email: taylorsccs@juno.comwww.taylorsconcretecutting.comServices: FS, CD, WL, GPR

Louisiana

A & B Concrete Coring Co., Inc. Richard H. Jones, Jr.20975 Plank RdZachary, LA 70791Tel: 225-654-2873Email: rick@abconcretecoring.comwww.abconcretecoring.comServices: FS, CD, WL, WR, SD, CC

All Around Concrete Cutting, Inc.Heidi Labourdette-Wyatt724 Little Farms AveMetairie, LA 70003504-739-9166allaroundconcrete@yahoo.comwww.allaroundconcretecutting.com

Specialty Demolition, LLC Craig Caliva909 S Broad StNew Orleans, LA 70125Tel: 504-821-7899Email: craig@specialtydemo.comwww.specialtydemo.comServices: FS, CD, WL, SD

Maryland

Brookbank Core Drilling & Sawing, Inc. Joyce BrookbankPO Box 6363Waldorf, MD 20603Tel: 301-373-8030

Concrete Technology Services Mid-Atlantic, Inc. Terrance Gilliam10005 Good Luck RdGlenndale, MD 20769Tel: 301-794-7500Email: terry@ctsinc.orgwww.ctsinc.orgServices: FS, CD, WL, WR, SD, CC, GPR

Delta Contractors & Associates, LLC Steven Parson605 S Caton AveBaltimore, MD 21229Tel: 410-624-0990Email: steven@deltacontractorsllc.comwww.deltacontractorsllc.com

East Coast Concrete Specialities, Inc. Matt Hogan7229 Montevideo RdJessup, MD 20794Tel: 703-478-0708Email: matt@eccci.comwww.concretespecialties.comServices: FS, CD, WL, WR, SD, CC, GPR, P

G & M Services, LLC Anthony Manning7525 Connelley Dr Ste T-UHanover, MD 21076Tel: 410-787-8828Email: tmanning@gmservices.wswww.gmservices.wsServices: FS, CD, WL, WR, SD, GPR

Power Component Systems, Inc. Brian Lawton7526 Connelley Dr Ste RHanover, MD 21076Tel: 410-760-0022Email: brian@powercomponentsystems.comwww.powercomponentsystems.comServices: FS, CD, WL, WR, SD

Massachusetts

Cornerstone Masonry Services Christopher Lammey54 Clapp StNorton, MA 02766Tel: 508-285-6469Email: cmlammey@comcast.net

Jack Doherty Contracting, LLC Jack Doherty1 Joseph TerWoburn, MA 01801Tel: 781-983-5436Email: jack@jackdohertycontracting.comServices: FS, CD, WL, SD

Jack Moore Associates, Inc. Jack Moore250 Barber AveWorcester, MA 01606Tel: 508-853-3991Email: estimates@primedrilling.comServices: FS, CD, WL, WR, SD, GPR

Pro Cut, Inc. Ron Culgin124 Calvary StWaltham, MA 02453Tel: 781-899-0006Email: rculgin@procutinc.comwww.procutinc.comServices: FS, CD, WL, WR, SD, CC, GPR

Witch Enterprises, Inc. Craig A. DamonPO Box 673Agawam, MA 01001Tel: 413-786-7314Email: cdamon@witchenterprises.comwww.witchenterprises.comServices: FS, CD, WL, WR, SD, CC, GPR

Michigan

Concrete Cutting & Breaking Co. Dan Vander Mey4501 Airwest Dr SEKentwood, MI 49512Tel: 616-554-4876Email: dvandermey@concut.comwww.concut.comServices: FS, CD, WL, WR, SD, CC

Concrete Cutting Specialists, Inc. Mike Oomen10333 Hercules RdFreeland, MI 48623Tel: 989-695-5344Email: ccsifreeland@aol.comServices: FS, CD, WL, SD, CC

Cougar Contracting, Inc. Joe Pejakovich29305 Wall StWixom, MI 48393Tel: 248-348-8860Email: joepejakovich@cougarcontracting.comwww.cougarcontracting.comServices: FS, CD, WL, WR, SD, CC

Cut and Core Concrete Cutting, LLC Michael Hofer1222 E 11 Mile RdMadison Heights, MI 48070Tel: 734-219-8209Email: michaelhofer@cutandcore.netwww.cutandcore.netServices: FS, CD, WL, CC

Detroit Diamond Drilling, Inc. Kirt Hardoin7021 W Eight Mile RdDetroit, MI 48221Tel: 313-864-3600Email: kirt@detroitdiamonddrilling.comwww.detriotdiamonddrilling.com

Diamond Concrete Sawing Aaron Louisell855 Godfrey Ave SWGrand Rapids, MI 49503Tel: 800-968-3745Email: aaron@diamondconcretesawing.comwww.diamondconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR

Diamond Concrete Sawing Dan Scholten738 East WalnutKalamazoo, MI 39007Tel: 269-327-1919Email: dans@diamondconcretesawing.comwww.diamondconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR

Diamond Subsurface Imaging Glenn Dekok855 Godfrey Ave SWGrand Rapids, MI 49503Tel: 616-245-3100Email: glennd@diamondsubsurfaceimaging.comwww.diamondsubsurfaceimaging.com

Elmer’s Crane & Dozer, Inc. Eric Sanborn3600 Rennie School RdTraverse City, MI 49685Tel: 231-943-3443Email: toni@teamelmers.comwww.teamelmers.com

FMG Concrete Cutting, Inc. Frank Gobright3515 S Old US Highway 23Brighton, MI 48114Tel: 810-227-3650Email: joan@fmgcutting.comwww.fmgconcretecutting.comServices: FS, CD, WL, WR, CC

K & H Concrete Cutting, Inc. Ed Huisman1159 Electric Ave Ste AMoline, MI 49335Tel: 616-877-4910Email: ed@kandh.comwww.kandh.com

Minnesota

Advanced Concrete Sawing, Inc. Bennett Jones1245 Pierce Butler RteSt.Paul, MN 55104Tel: 651-633-8499Email: bennett@acsawing.comwww.advancedconcretesawing.comServices: FS, CD, WL, WR, SD, CC

Langford Tool & Drill Co./ Mason-Cutters David McCulloch1125 Washington Ave SMinneapolis, MN 55415Tel: 612-332-7741Email: mason-cutters@langfordtool.comwww.langfordtool.comServices: FS, CD, WL, WR, SD

Mississippi

Diamond Concrete Sawing Gary Williams2909 26th AveGulfport, MS 49546Tel: 228-392-2503Email: garyw@diamondconcretesawing.comwww.diamondconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR

McCrary Construction ServicesLu McCrary720 Lehmberg Rd Ste 3Columbus, MS 39702662-244-3424lu.mccrary@mccrarywest.comwww.mccraryconstructionservices.com

Missouri

K.C. Coring & Cutting Construction, Inc. Joe Freed 7240 Central St Kansas City, MO 64114 Tel: 816-523-2015 E-mail: joe@sawconcrete.comwww.sawconcrete.comServices: FS, CD, WL, WR, SD, CC

Merlin Stelzer Services, Inc. Richard Stelzer4144 Papin StSt. Louis, MO 63110Tel: 314-535-7540Email: ras@merlinstelzer.comwww.msscuts.comServices: FS, CD, WL, WR, SD

Miller’s Pro-Cut, Inc. John Miller5900 E 154th TerGrandview, MO 64030Tel: 816-322-7917Email: john@millersprocut.comServices: FS, CD, WL, WR, SD, CC

Montana

Precision Concrete Cutting Pete BarnardPO Box 30142Billings, MT 59107Tel: 406-855-7733Email: precisioncutting@imt.netServices: FS, CD, WL, SD

Nebraska

Concrete Saw & Core, Inc. Matthew Ackerman5100 N 27th St Ste A-2 MB 114Lincoln, NE 68521Tel: 402-525-7856Email: concretesawinc@hotmail.comwww.concretesawinc.comServices: FS, CD, WL, WR, SD

Concrete Saw & Core, Inc. Matthew AckermanPO Box 745North Platte, NE 69103Tel: 308-532-7515Email: concretesawinc@hotmail.comwww.concretesawinc.comServices: FS, CD, WL, WR, SD

Omaha Concrete Sawing, Inc. Dick Jepson9413 N 29th StOmaha, NE 68112Tel: 402-455-8823Email: rjepson56@aol.comServices: FS, CD, WL, CC

New Hampshire

Cut & Core Bill HarperPO Box 350Jaffrey, NH 03452Tel: 603-532-8580Email: bill@cutandcorenh.comServices: FS, CD, WL, SD

Kidder Concrete Cutting & Coring Lisa White22 Danville RdPlaistow, NH 03865Tel: 603-382-1799Email: law0623@aol.comwww.kidderconcrete.comServices: FS, CD, WL, SD, CC

Pro Cut of New Hampshire, Inc. Daryl Moore183 Route 125 Unit C3Brentwood, NH 03833Tel: 603-626-0440Email: dmoore@procutinc.comwww.procutinc.comServices: FS, CD, WL, WR, CC

New Jersey

Advanced Coring & Cutting Corp. Steven C. Lisowski1766 Route 34Farmingdale, NJ 07727Tel: 732-681-7733Email: steven@advancedcoringandcutting.comwww.advancedcoringandcutting.comServices: FS, CD, WL, WR, SD

Atlantic Concrete Cutting, Inc. Douglas WalkerPO Box 98Mt. Holly, NJ 08060Tel: 609-261-7200Email: dwalker@atlanticconcretecutting.comwww.atlanticconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR

Atlantic Concrete Cutting, Inc. Stuart L. Fishman11 Furler StTotowa, NJ 07512Tel: 609-685-4602Email: sfishman@atlanticconcretecutting.comwww.atlanticconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR, P

Commercial Coring & Sawing Ronald Lalusis2306 Wallace BlvdCinnaminson, NJ 08077Tel: 856-786-8150Email: commercialcoring@verizon.netServices: FS, CD, WL, WR, SD, CC

Patriot Sawcutting Incorporated Mike Garrett103 S Van Brunt StEnglewood, NJ 07631Tel: 855-729-2887Email: mike@patriotsawcutting.comwww.patriotsawcutting.comServices: FS, CD, WL, SD, CC

New Mexico

Precision Concrete Services, Inc. Jeff Whyman44 Campbell CtLos Lunas, NM 87031Tel: 505-865-7476Email: jwsamr72@msn.comServices: FS, CD, WL, SD, P

New York

Capital Concrete Cutting, Inc. Richard Zakaib336 Harris Hill RdWilliamsville, NY 14221Tel: 800-288-2872Email: chriszakaib@hotmail.comServices: FS, CD, WL, WR, CC

Concrete Cutting & Breaking Co. Mark Navel4025 Walden AveLancaster, NY 14086Tel: 716-684-0262Email: mnavel@concut.comwww.concut.comServices: FS, CD, WL, WR, SD, CC

J.P. Hogan Coring & Sawing, Inc. Jack Hogan680 Gulf AveStaten Island, NY 10314Tel: 718-761-7014Email: jhogan@888jphogan.comwww.888jphogan.comServices: FS, CD, WL, WR, SD, CC

MMG Industrial Matt Gehman186 Colgate AveBuffalo, NY 14220Tel: 716-348-3434Email: mattg@diamondwirecutting.comwww.diamondwirecutting.comServices: FS, CD, WL, WR, SD

Nevada

Penhall Company - Las Vegas Dave Henning4755 W University AveLas Vegas, NV 89103Tel: 702-736-6033Email: dhenning@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Reno Mark Bray550 E Parr BlvdReno, NV 89512Tel: 775-786-8498Email: mbray@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

R & K Concrete Cutting, Inc. Donald L. Pike II3922 Octagon Rd Ste BN. Las Vegas, NV 89030Tel: 702-452-3866Email: dlpike2@randkconcretecuttinginc.comServices: FS, CD, WL, WR, SD, CC, GPR

North Carolina

Alrays International Alan Wray8463 Keven CirSherrills Ford, NC 28673Tel: 704-724-4066Email: alan@alraysconcretecutting.comwww.alraysconcretecutting.comServices: FS, CD, WL, SD, GPR

Concrete Sawing Solutions Div. of Swank Construction Co., LLC Jason Manning455 Hein DrGarner, NC 27529Tel: 919-662-5353Email: jason@concretesawingsolutions.comwww.swankco.comServices: FS, CD, WL, WR, SD

Core Master, LLC Lisa GonzalezPO Box 8946Rocky Mount, NC 27804Tel: 866-451-5661Email: info@coremasterusa.comwww.coremasterusa.comServices: FS, CD, WL, SD

DARI Concrete Sawing and Drilling Jared London421 Raleigh View RdRaleigh, NC 27610Tel: 919-278-8145Email: jmlondon@dhgriffin.comwww.dhgriffin.comServices: FS, CD, WL, WR, SD

Penhall Company - Charlotte Keith Medlin2130 Gateway BlvdCharlotte, NC 28208Tel: 704-392-0644Email: kmedlin@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Raleigh Paul Mounts111 First Flight LnMorrisville, NC 27560Tel: 919-859-9911Email: pmounts@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

North Dakota

Advanced Cutting Inc Florian AberlePO Box 2743Bismarck, ND 58502Tel: 701-258-3734Email: advancedcutting@hotmail.com

EdSons Construction, LLC Kevin Nagel1220 N 11th StBismarck, ND 58501Tel: 701-222-4289Email: edsonsconstruction@yahoo.comwww.edsons.netServices: FS, CD, WL, WR, SD, CC

Concrete Coring Company of Cincinnati, Inc. Hal Edington7210 Edington DrCincinnati, OH 45249Tel: 513-489-3555Email: sawdog@concretecoringco.comwww.concretecoringco.comServices: FS, CD, WL, WR, SD, CC

Concrete Cutting & Breaking Co. Jeff Miller4568 E 71st StCleveland, OH 44105Tel: 440-546-0500Email: jmiller@concut.comwww.concut.comServices: FS, CD, WL, WR, SD, CC

Cutting Edge Services Corp. Tim Beckman1535 Old State Route 74Batavia, OH 45103Tel: 513-388-0199Email: beckman@cuttingedgeservices.comwww.cuttingedgeservices.comServices: CD, WL, WR, SD

Donley Concrete Cutting Company David Donley1441 Gest StreetCincinnati, OH 45203Tel: 513-421-1950Email: dave@donleyconcrete.comwww.donleyconcrete.comServices: FS, CD, WL, WR, CC, GPR

Donley Concrete Cutting Company David DonleyPO Box 272Pickerington, OH 43147Tel: 614-834-0300Email: dave@donleyconcrete.comwww.donleyconcrete.comServices: FS, CD, WL, WR, CC, GPR

Duffey Concrete Cutting, Inc. Scott LeStrange611 Daniels AveToledo, OH 43609Tel: 419-241-1010Email: slestrange@duffeyconcrete.comwww.duffeyconcrete.comServices: FS, CD, WL, WR, CC

Midwest Construction Co. Russ Thomas750 Main StMilford, OH 45150Tel: 513-575-2594Email: russ@midwestconstoh.comwww.midwestconstoh.com

Ohio Concrete Sawing & Drilling, Inc. Skip Aston8534 W Central AveSylvania, OH 43560Tel: 419-841-5656Email: skipaston@ohioconcrete.comwww.ohioconcrete.comServices: FS, CD, WL, WR, SD, CC, GPR

Ohio Concrete Sawing & Drilling, Inc. Sam Farmer314 Conover DrFranklin, OH 45005Tel: 937-746-8999Email: samfarmer@ohioconcrete.comwww.ohioconcrete.comServices: FS, CD, WL, WR, SD, CC, GPR

Ohio Concrete Sawing & Drilling, Inc. Tom Lenix2935 E 14th AveColumbus, OH 43219Tel: 614-252-1122Email: tomlenix@ohioconcrete.comwww.ohioconcrete.comServices: FS, CD, WL, WR, SD, CC, GPR

Ohio Concrete Sawing & Drilling, Inc. Tom White1100 Evans AveAkron, OH 44305Tel: 330-633-5104Email: tomwhite@ohioconcrete.comwww.ohioconcrete.comServices: FS, CD, WL, WR, SD, CC, GPR

Precision Concrete Cutting of Carey, LLC Matthew Leightey3727B County Highway 96Carey, OH 43316Tel: 419-764-0808Email: pccutting@wcnet.orgwww.pccutting.comServices: FS, CD, WL, SD, CC

Precision ProCut Matt Marcum5500 Old Brecksville RdIndependence, OH 44131Tel: 216-573-2400Email: mmprocut@penv.netwww.precisionprocut.comServices: FS, CD, WL, WR, SD, CC, GPR

Oklahoma

Big K Concrete Sawing & Drilling Kelly BlackPO Box 700Skiatook, OK 74070Tel: 918-396-4611Email: bigkconcretesawing@gmail.comwww.bigkcuts.comServices: FS, CD, WL, SD

Champion Concrete Services, Inc. Mike BevensPO Box 691976Tulsa, OK 74169Tel: 918-438-6203Email: championconcrete@aol.comServices: FS, CD, WL, WR, SD, CC, GPR

Oregon

A Cut Above Concrete Cutting John Patrick5070 NW 235th Ave Ste 118Hillsboro, OR 97123Tel: 503-547-8806Email: acacc@frontier.comwww.acutaboveconcrete.com

American Concrete Cutting Eric Hill32900 Roberts CtCoburg, OR 97408Tel: 541-726-8597Email: general@americanconcretecutting.comwww.americanconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR

Penetrations, Inc. Travis SquiresPO Box 460Turner, OR 97392Tel: 800-522-2673Email: tspeninc@aol.comwww.penetrationsinc.comServices: FS, CD, WL, WR, SD, CC, GPR, P

Penhall Company - Portland John Rowley11650 NE Marx StPortland, OR 97220Tel: 503-253-9500Email: jrowley@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Viking Concrete Cutting, Inc. Morgan Steiner5235 Primrose LnKlamath Falls, OR 97601Tel: 541-884-1399Email: vikingconcretecutting@charter.netwww.vikingconcretecutting.comServices: FS, CD, WL, WR, SD

We Cut Concrete Co., Inc. David LannenPO Box 7071Bend, OR 97708Tel: 541-382-4663Email: david@wecutinc.comwww.wecutoregon.com

Pennsylvania

Allegheny Diamond Services Matt Hoffman518 Scenery DrElizabeth, PA 15037-2055Tel: 412-780-3449Email: thehoff@hotmail.com

Atlantic Concrete Cutting, Inc. Jeff BoggsPO Box 58Spring City, PA 19475Tel: 717-599-1966Email: jboggs@atlanticconcretecutting.comwww.atlanticconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR

Cardinal International Grooving & Grinding LLC Philip ZuzeloPO Box 450Conshohocken, PA 19428Tel: 610-825-2200Email: philip.zuzelo@cardinalgrooving.comwww.cardinalgrooving.comServices: GV

Concrete Cutting Systems, Inc. David Nevrotski2514-16 Orthodox StPhiladelphia, PA 19137Tel: 215-533-0652Email: daven@sawcutr.comwww.concretecuttingsystems.netServices: FS, CD, WL

Conewago Concrete Services Kevin Gladis576 Edgegrove RdHanover, PA 17331Tel: 717-632-7722Email: kgladis@conewago.comwww.conewago.comServices: FS, CD, WL, SD

EXCO, INC Ed Lounsberry684 Dunksferry RdBensalem, PA 19020Tel: 215-510-2240Email: elounsberry@mecoconstructors.comwww.excopcm.comServices: CD

Hafner and Son, Inc. Travis Hafner1330 Blue Mountain DrDanielsville, PA 18038Tel: 610-978-8990Email: thafner@ptd.netwww.hafnerandson.comServices: FS, CD, WL, WR, SD, CC

Keystone Concrete Cutting Co. Pamela Neal325 E Stiegel StManheim, PA 17545Tel: 717-664-0571Email: pam@keystoneconcretecutting.comwww.keystoneconcretecutting.com

Matcon Diamond, Inc. David G. Matesic3447 E Carson StPittsburgh, PA 15203Tel: 412-481-0280Email: david@matcondiamond.comServices: FS, CD, WL, WR, SD, CC, GPR

Pitt Service CenterWilliam Markland8031 Pennsylvania AveIrwin, PA 15642Tel: 724-863-1010Email: bmarkland@pidpi.comServices: FS, CD, WL, WR

Power Component Systems, Inc. Charles Cuaz1601 S 19th StHarrisburg, PA 17104Tel: 717-939-8226Email: ccuaz@powercomponentsystems.com

www.powercomponentsystems.comServices: FS, CD, WL, WR, SD

Pro-Cut Concrete Sawing & Drilling Dennis Shifler101 Wesley DrMechanicsburg, PA 17019Tel: 717-766-2775Email: dennis@procutconcretecutting.comwww.procutconcretecutting.comServices: FS, CD, WL, WR, SD, CC, GPR

Swank Construction Co., LLC Michael J. Golembiewski632 Hunt Valley CirNew Kensington, PA 15068Tel: 724-335-6000Email: chippy@swankco.comwww.swankco.comServices: FS, CD, WL, WR, SD

Rhode Island

ACE Concrte Cutting Debra Stowik156 Colonial AveCumberland, RI 02864Tel: 401-692-0147Email: dstowik@aceconcretecutingllc.com

Cut-Rite Concrete Cutting Corp. Dennis P. Mello22 Lockbridge StPawtucket, RI 02860Tel: 401-728-8200Email: cutritecc@verizon.netwww.cutriteconcrete.comServices: FS, CD, WL, WR, SD

Pro Cut, Inc. Tom Chadwick10 Amflex DrCranston, RI 02921Tel: 401-464-5001Email: tchadwick@procutinc.comwww.procutinc.comServices: FS, CD, WL, WR, CC

South Carolina

D.M. Conlon Dan-Kel Concrete Coring, Sawing & Scanning DJ ConlonPO Box 7127Myrtle Beach, SC 29572Tel: 843-449-0199Email: dmconlon@dankelconcrete.comwww.dankelconcrete.comServices: FS, CD, WL, WR, SD, CC, GPR

Dixie Concrete Cutting, Inc. Gary Kraft16 Maple Creek CirGreenville, SC 29607Tel: 864-299-6600

Email: gtkraft1@att.netServices: FS, CD, WL, WR, SD, CC, GPR

Patriot Concrete Cutting, LLC Douglas K. RichardsPO Box 504Piedmont, SC 29673Tel: 864-299-0330Email: patriotcutting@bellsouth.netServices: FS, CD, WL, WR, SD

Penhall Company - Columbia/Charleston Bill Burchfield2208 Memorial DrCayce, SC 29033Tel: 803-765-0039Email: bburchfield@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

South Dakota

All States Concrete Cutting SD, Inc. Kenneth Herbek47062 98th StSioux Falls, SD 57108Tel: 877-416-3478Email: allstatessd@yahoo.comwww.allstatesconcretecutting.comServices: FS, CD, WL, WR, SD

Custom Concrete Cutting Kathy Reishus814 Flormann StRapid City, SD 57701Tel: 605-209-6600Email: ccc@rushmore.com

Tennessee

B & C Concrete Cutting, LLC Brant LesogorPO Box 946Westmoreland, TN 37186Tel: 615-206-0355Email: bcconcretecutting@gmail.comwww.bcconcretecutting.comServices: FS, CD, WL, WR, SD

Bluff City Coring & Cutting, Inc. Marty Henley6612 Reese RdMemphis, TN 38133Tel: 901-383-9763Email: bluffcitycoring@bellsouth.netwww.bluffcitycoring.comServices: FS, CD, WL, SD, CC, GPR

Concrete Cutting Systems, Inc. Joe MeighanPO Box 12129Knoxville, TN 37912Tel: 865-938-8888

Email: ccsi-joe@comcast.netwww.concretecuttingsystems.comServices: FS, CD, WL, WR, SD, CC, GPR

Concrete Cutting Systems, Inc. Michael Pietrowski116 Cripple Creek LoopWatauga, TN 37694Tel: 423-542-8888Email: mrpie5@embarqmail.comwww.concretecuttingsystems.comServices: FS, CD, WL, WR, CC, GPR

Cuts, Inc. Matthew Hephner3533 Neal DrKnoxville, TN 37918Tel: 865-922-0800Email: matt@cutsinc.orgwww.cutsinc.orgServices: FS, CD, WL, WR, SD, CC

E. Luke Greene Company, Inc. Chris Rhyne619 E Maple StJohnson City, TN 37601Tel: 423-926-1151Email: rhino@elukegreene.comwww.elukegreene.comServices: FS, CD, WL, WR, SD

Accurate Coring, Inc. Cliff GrotePO Box 220523El Paso, TX 79913Tel: 915-886-2600Email: accuratecoring@sbcglobal.netServices: FS, CD, WL, SD, GPR

Aggregate Technologies, Inc. Ronnie Wills10700 Tower Oaks BlvdHouston, TX 77070Tel: 281-579-7229Email: ronnie@aggregatetechnologies.comwww.aggregatetechnologies.com Services: FS, CD, WL, WR, SD, GPR

American Inshore Divers Corp. Mike Aiken1804 1st StLiverpool, TX 77577Tel: 281-581-2443Email: info@aidc.us.comwww.aidc.us.comServices: CD, WR, SD, GPR

Associated Cutting, Inc. Paul Wyche2676 Brenner DrDallas, TX 75220Tel: 214-350-4436

Email: associatedcutting@yahoo.comwww.associatedcutting.comServices: FS, CD, WL, WR, SD

Coats Coring & Sawing, Inc. Niki CoatsPO Box 508Cleveland, TX 77328Tel: 281-432-2673Email: nikicoats@cmaaccess.comServices: FS, CD, WL, SD, CC

Concrete Penetrating Co. Larz Smith2303 Shorecrest DrDallas, TX 75235Tel: 214-634-2990Email: lsmith@con-pen.comwww.concretepenetrating.comServices: FS, CD, WL, WR, SD

Concrete Renovation, Inc. Donna Harris6600 Randolph BlvdSan Antonio, TX 78233Tel: 210-653-6120Email: donna.cri@sbcglobal.netwww.concreterenovation.comServices: FS, CD, WL, SD

Diamond Core Drilling Systems, Inc. Randy WendelPO Box 71616Corpus Christi, TX 78467Tel: 361-852-7446Email: dcdsinc@grandecom.netServices: FS, CD, WL

GHR Concrete, Inc. Paul GonzalesPO Box 224946Dallas, TX 75222Tel: 214-232-3622Email: info@ghrconcrete.comwww.ghrconcrete.comServices: FS, CD, WL, SD, CC

Holes Golden Triangle, LLC Susan Hollingsworth9911 Franklin RdHouston, TX 77070Tel: 281-469-7070Email: shollingsworth@holesinc.comwww.holesinc.comServices: FS, CD, WL, WR, SD, GPR

Holes Incorporated Kellie Vazquez9911 Franklin RdHouston, TX 77070Tel: 281-469-7070Email: kvazquez@holesinc.comwww.holesinc.comServices: FS, CD, WL, WR, SD, GPR

Holes of San Antonio, Inc. George Major118 Braniff DrSan Antonio, TX 78216Tel: 210-349-5256

Email: georgejr@holesofsa.comwww.holesofsa.comServices: FS, CD, WL, SD, CC, GPR

Holes Technology, LP Darlene East9911 Franklin RdHouston, TX 77070Tel: 281-469-7070Email: deast@holesinc.comwww.holesinc.comServices: GPR

LD Consulting, LLC Dan Hollingsworth13910 Longwood DrWillis, TX 77318Tel: 281-898-1763Email: ldhgun@aol.com

Magnum Sawing & Coring, Inc. Danny SpencerPO Box 153269Irving, TX 75015Tel: 972-251-1300Email: danny@magnumsawing.comwww.magnumsawing.comServices: FS, CD, WL, WR, SD

Penhall Company - Austin Kevin Sheridan4201 Felter LnAustin, TX 78744Tel: 512-385-8500Email: ksheridan@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Dallas Richard Hertel1201 Minters Chapel Rd Ste 304Grapevine, TX 76051Tel: 817-416-1846Email: rhertel@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Slab Services, LLC Asa Hidbrader6046 FM 2920 Rd # 405Spring, TX 77379Tel: 281-351-8010Email: shelley.slabservices@yahoo.comwww.slabservices.com

Greene’s, Inc. Mike Greene1065 W 750 SWoods Cross, UT 84087Tel: 801-292-6699Email: mikeg@greenesinc.comwww.greenesinc.comServices: FS, CD, WL, WR, SD, CC

20 | The AssociATion of cuTTing ProfessionAls • www.csdA.org

Neil’s Concrete Cutting, Inc. Neil Hathaway2358 W Whitaker DrTaylorsville, UT 84129Tel: 801-969-1172Email: neil@neilsconcretecutting.comwww.neilsconcretecutting.comServices: FS, CD, WL, SD, CC

Penhall Company - Salt Lake City Joe Ebert2449 S Constitution BlvdWest Valley City, UT 84119Tel: 801-355-7364Email: jebert@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Saw Jockey Chance EwingPO Box 711967Salt Lake City, UT 84171Tel: 801-455-9333Email: chance@sawjockey.comwww.sawjockey.comServices: FS, CD, WL, WR, SD, CC

Walsh Concrete Cutting Specialists Mike Walsh1482 Industrial RdSalt Lake City, UT 84104Tel: 801-975-6400Email: mike@walshcc.comServices: FS, CD, WL, WR, SD

Virginia

Blake Construction of VA, Inc. Brian Blake2217 Shenandoah Ave NWRoanoke, VA 24017Tel: 540-342-7203Email: bblake@blakebuilt.comwww.blakebuilt.comServices: FS, CD, WL, SD, GPR

Penhall Company - Richmond Carl Golden1821 Ruffin Mill CirColonial Heights, VA 23834Tel: 804-520-1260Email: cgolden@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Penhall Company - Washington DC Bill Moore8532 Terminal Rd # TLorton, VA 22079Tel: 919-859-9911Email: wpmoore@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Swank Construction Co., LLC Dick Logsdon539 London Bridge RdVirginia Beach, VA 23454Tel: 757-200-7505Email: dick@swankco.comwww.swankco.comServices: FS, CD, WL, WR, SD

Washington

Accurate Concrete Cutting, Inc. Vern Balkowitsch, Sr.PO Box 5798Vancouver, WA 98668Tel: 360-694-8564Email: mary@accurate-concrete-cut.comwww.accurate-concrete-cut.comServices: FS, CD, WL, WR, SD, CC

A-Line Concrete Cutting, LLC Travis BerryPO Box 6219Vancouver, WA 98668Tel: 503-227-2580Email: alinedemo@comcast.netServices: FS, CD, WL, WR, SD, CC

Arbor Heights Concrete Core Drilling, LLC Jesse C. Dean2645 SW 110th StSeattle, WA 98146Tel: 206-909-8266Email: jessedean@arborheightsdrilling.comwww.arborheightsdrilling.com

Cascade Concrete Sawing & Drilling Dick Olsen27500 16th Ave SFederal Way, WA 98003Tel: 253-872-7578Email: dick@cascadeconcretesawing.comwww.cascadeconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR

Cascade Concrete Sawing & Drilling Jeff Lawson15022 35th Ave W Ste BLynnwood, WA 98087Tel: 206-542-9494www.cascadeconcretesawing.comServices: FS, CD, WL, WR, SD, CC, GPR

Evergreen Concrete Cutting Matt Taylor767 Valentine Ave SEPacific, WA 98047Tel: 800-480-1494Email: matt@evergreenconcretecutting.comwww.evergreenconcretecutting.com

Interstate Sawing & Drilling, LLC David Desserault2455 Beaudry RdMoxee, WA 98936Tel: 509-834-2044Email: dave@interstatesd.comwww.poppoffinc.comServices: FS, CD, WL, SD, CC

National Concrete Cutting, Inc. Matthew Finnigan7715 Pacific Highway EastMilton, WA 98354Tel: 800-551-0511Email: matthewf@nationalconcretecuttinginc.comwww.nationalconcretecuttinginc.comServices: FS, CD, WL, SD, CC

Penhall Company - Seattle Scott Galloway11001 E Marginal Way STukwila, WA 98168Tel: 206-763-9200Email: sgalloway@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, CC

Salinas Sawing & Sealing, Inc. Tracy Campbell7804 40th Ave WMukilteo, WA 98275Tel: 425-745-0706Email: tracy@salinasconcrete.comwww.salinasconcrete.comServices: FS, CD, WL, SD

Talisman Construction Services, Inc. Jessant T. SpencerPO Box 6189Spokane, WA 99217Tel: 509-487-1292Email: info@talismanservices.comwww.talismanservices.comServices: CD, WL, WR, SD

Wisconsin

Central Concrete Cutting, Inc. Jack Sondergard1021 Starr AveEau Claire, WI 54703Tel: 888-729-4642Email: jacksondergard@sprynet.comwww.centralconcretecutting.comServices: FS, CD, WL, WR, SD

Central Concrete Cutting, Inc. Jack SondergardW719 Leroy StEdgar, WI 54426Tel: 715-352-2552Email: jacksondergard@sprynet.comwww.centralconcretecutting.comServices: FS, CD, WL, WR, SD

Con-Cor Company, Inc. Karen Ann PolzerW146N5790 Enterprise AveMenomonee Falls, WI 53051Tel: 262-781-3660Email: paul@con-cor-co.comwww.con-cor-co.comServices: FS, CD, WL, WR, SD, CC

Concrete Sawing Services Co. Paul Konkler911 Ogden AveSuperior, WI 54880Tel: 715-392-2463Email: pkonkler@centurytel.netwww.concretesawingservices.comServices: FS, CD, WL, WR, CC

Hard Rock Sawing & Drilling Specialist Co. Mary DvoratchekPO Box 718Keshena, WI 54135Tel: 715-799-3823Email: hardrock@genevaonline.comwww.hardrocksawanddrill.comServices: FS, CD, WL, WR, SD, CC

Interstate Sawing Company, Inc. Duke Long7403 Sleepy Hollow RdWest Bend, WI 53090Tel: 262-334-7522Email: we-saw-it@interstatesawing.comwww.interstatesawing.comServices: FS, CD, WL, WR, SD, CC

Interstate Sealant & Concrete, Inc. Cheryl SmentS40W24211 Rockwood WayWaukesha, WI 53189Tel: 262-547-6316Email: csment@interstatesealant.comwww.interstatesealant.com

Wyoming

Concrete Saw & Core, Inc. Matthew Ackerman109 E 17th St Ste 4143Cheyenne, WY 82001Tel: 307-778-0880Email: concretesawinc@hotmail.comwww.concretesawinc.comServices: FS, CD, WL, WR, SD

CANADA

Alberta

A-1 Concrete Cutting & Coring Ltd.Robert Skolly4949 Hubalta Rd SECalgary AB T2B 1T5CANADA403-273-7500rskolly@a-1concrete.comwww.a-1concrete.com

Doncore Concrete Cutting & Coring Ltd. Don ColbournePO Box 50112 RPO MarlboroughCalgary, AB T2A 7P1CANADATel: 403-312-3424Email: doncore@gmail.comwww.doncore.comServices: FS, CD, WL, SD, CC

Road Savers Western Ltd. Ian Cousins9620 36 St NECalgary, AB T3J 4E3CANADATel: 403-590-2525Email: rsavers@nucleus.comServices: FS, CD, WL, CC, GPR

Supreme Concrete Cutting & Drilling Reno Trentini11511 160 St NWEdmonton, AB T5M 3V9CANADATel: 780-489-0151Email: reno@supremeconcretecutting.com

Walser Contracting Ltd. Michael Podolak14516 86 Ave NWEdmonton, AB T5R 4B6CANADATel: 780-721-3405Email: walserltd@gmail.comServices: FS, CD, WL, WR, SD, CC, GPR

Yellowhead Coring & Cutting, Ltd. Ian McGill410 68 StEdson, AB T7E 1M7CANADATel: 780-723-5282Email: info@yellowheadcoring.comwww.yellowheadcoring.comServices: FS, CD, WL, WR, SD

British Columbia

Amec Contracting Ltd. Ante Curkovic7406 Conway AveBurnaby, BC V5E 2P8CANADATel: 604-438-4413Email: tony@ameccontracting.cawww.ameccontracting.ca

Canadian Cutting & Coring Ltd.John Van Dyk3999 2nd AveBurnaby BC V5C 3W9CANADAPhone: 866-658-5250info@concretecutting.cawww.concretecutting.ca

Cancor Cutting & Coring Ltd. Rory Le BrocqPO Box 550Errington, BC V0R 1V0CANADATel: 604-250-8252Email: cancorcutting@shaw.caServices: FS, CD, WL, WR, SD, CC, GPR

Nuwest Concrete Cutting & Coring Grant Gettling227 St. Patrick StNew Westminster, BC V3L 1P9CANADATel: 604-525-6145Email: nuwestcontracting@telus.net

Pacific Blasting & Demolition Ltd. Tom Bagaric3183 Norland AveBurnaby, BC V5B 3A9CANADATel: 604-291-1255Email: tomb@pacificblasting.comwww.pacificblasting.comServices: FS, CD, WL, WR, SD, CC, GPR

Westcoast Cutting & Coring Ltd.Brien Wnuk903 Sherwood AveCoquitlam BC V3K 1A7CANADA604-291-1448westcoastcutting@telus.netwww.westcoastcutting.ca

Westcoast Scanning Ltd.Rachel Monette903 Sherwood AveCoquitlam BC V3K 1A7CANADA604-219-0375rachelm@westcoastscanning.cawww.westcoastscanning.ca

Manitoba

Di-Tech International, Inc. Ted Johnston1864 Springfield Rd Box 4 Grp 525 RR 5Winnipeg, MB R2C 2Z2CANADATel: 204-222-7400Email: ted@di-techinternational.comwww.di-techinternational.comServices: FS, CD, WL, WR, SD, CC. GPR

New Brunswick

A & R Concrete Drilling & Sawing Ltd. Rob GatesPO Box 27057 100 Sunset DriveSaint John, NB E2M 5S8CANADATel: 506-642-2011Email: robsawanddrill@hotmail.com

Nova Scotia

MacIsaac Drilling Limited John MacIsaac191 Silver Birch DrHubley, NS B3Z 1A8CANADATel: 902-876-2258Email: macdrill@eastlink.cawww.macisaacdrilling.comServices: FS, CD, WL, SD, CC, GPR

Ontario

Advance Cutting & Coring Ltd. Stephane Campeau1308 Leeds AveOttawa, ON K1B 3W3CANADATel: 613-741-7561Email: stephane@advancecutting.cawww.advance cutting.caServices: FS, CD, WL, WR, SD, CC

All Trades Contracting Reg Galbraith404-1100 Memorial AveThunder Bay, ON P7B 4A3CANADATel: 807-626-2220Email: info@alltradescontracting.cawww.alltradescontracting.caServices: FS, CD, WL, SD

Basic Concrete Cutting, Inc. Jim Sterioff6101 Netherhart Rd Unit 10Mississauga, ON L5T 1G5CANADATel: 905-670-8142Email: basicconcretecutting@yahoo.caServices: FS, CD, WL

Capital Cutting & Coring Ltd. Mike Vezina48-2627 Edinburgh PlaceOttawa, ON K1B 5M1CANADATel: 613-737-5227Email: mike@capcut.comwww.capcut.comServices: FS, CD, WL, WR, SD, CC, GPR, P

D & D Diamond Cutting and Coring Doug Buiter42076 Hwy 3 RR 3Wainfleet, ON L0S 1V0CANADATel: 905-899-1998Email: doug@ddcuttingandcoring.comwww.ddcuttingandcoring.comServices: FS, CD, WL, WR, SD, CC, GPR

Facca Construction, Inc. Don Gardonio2097 County Rd 31 RR 1Ruscom Station, ON N0R 1R0CANADATel: 519-975-0377Email: don@facca.comwww.facca.comServices: FS, CD, WL, SD

Ontario Cutting & Coring Limited Tony Zapparoli2398 Haines Rd Unit IMississauga, ON L4Y 1Y6CANADATel: 905-279-2660Email: sales@ontariocuttingandcoring.comwww.ontariocuttingandcoring.comServices: FS, CD, WL, WR

Penhall Company/The Graff Company Toronto John MacDonald35 Precision RdEtobicoke, ON M9W 5H3CANADATel: 905-457-8120Email: jmcdonald@penhall.comwww.penhall.comServices: FS, CD, WL, WR, SD, GPR

Quebec

Constech Jacques Parent, Jr.27 Millar StGatineau, QC J8Y 3N8CANADATel: 613-868-3800Email: jacques@constech.cawww.constech.caServices: CD

Saskatchewan

Helgason Contracting Patrick HelgasonSite 27 Box 1 RR 5 Stn MPPPrince Albert, SK S6V 5R3CANADATel: 306-763-4824

Neskor Cutting and Coring ServicesRyan Korness1624 33rd St WSaskatoon SK S7L 0X3CANADA306-477-2020ryan@neskor.cawww.neskor.ca

Puerto Rico

TIANCO INC. David TiradoLomas Verdes Ave 1C-14B, PMB 119Bayamon, PR 00956Tel: 787-361-8185Email: info@tiancopr.comwww.tiancopr.com

concrete polishingnorth american contractors

Color Surface Cameron Honey2416 W Honey LaneFayetteville, AR 72704Tel: 479-283-6062Email: cameron@colorsurface.comwww.colorsurface.comServices: CP

Color Surface Robert Fruland768 Lanni CtHenderson, NV 89012Tel: 702-303-7149Email: colorsurface@me.comServices: CP

gpr contractors

Hard Rock Technologies, Inc. Emily Hammer200 South PkwyProspect Heights, IL 60070Tel: 847-275-4007Email: emily@hardrocktechnologies.comwww.hardrocktechnologies.comServices: GPR

National GPR Service, Inc. Jared Lampe1301 Larc Industrial BlvdBurnsville, MN 55337Tel: 877-556-4777Email: jared@ngprs.comwww.ngprs.comServices: GPR

Structure Scan, Inc. Tony Brunette1864 Springfield Rd Box 4 Grp 525 RR 5Winnipeg, MB R2C 2Z2CANADATel: 204-777-6590Email: tony@structurescan.cawww.structurescan.caServices: GPR

overseas contractors

Australia

Auscut Concrete Cutting & Drilling Ray Thomson18 McLennan DrKensington VIC 3031AUSTRALIATel: 61-3 9326 5800Email: ray@auscut.comwww.auscut.com.auServices: FS, CD, WL, WR, SD, CC

Conquest Cutting & Drilling Pty Ltd. Anthony PercyPO Box 180Mitcham VIC 3132AUSTRALIATel: 61-3 9879 1918Email: conquestadmin@bigpond.comwww.conquestcutting.com

Fast Cut Qld Pty. Ltd. Rex Scoles91 Basalt StGeebung QLD 4034 AUSTRALIATel: 61-7 3265 6537Email: admin@fastcut.com.au

National Contracting Pty. Ltd.David WilliamsPO Box 184Happy Valley SA 5159AUSTRALIATel: 61-8 8383 7500Email: dw@natconpl.com.auwww.natconpl.com.au

Online Concrete Cutting Services Pty. Ltd. Steven WyldeUnit 1, 4 Prince William DrSeven Hills NSW 22147 AUSTRALIATel: 61-2 9620 5555Email: sales@onlineconcrete.com.auwww.onlineconcrete.com.auServices: FS, CD, WL, WR

OzCut Concrete Cutting Services Robert RiggsUnit 5, 9-12 Lambridge PlacePenrith NSW 2750AUSTRALIATel: 61-2 4729 0061Email: ozcut@tpg.com.au

Qld Concrete Drilling & Sawing Pty Ltd. Catherine ThomsonPO Box 902Archerfield QLD 4108AUSTRALIATel: 61-7 3274 3803Email: enquiries@qcds.com.auwww.qcds.com.auServices: FS, CD, WL, WR, SD, CC, GPR

Super City Concrete Cutting P/L Alan TorrancePO Box 3022Darwin NT 0801AUSTRALIATel: 61-8 8941 5833Email: alant.supercity@bigpond.comwww.supercity.com.auServices: FS, CD, WL, WR, SD, CC

Super City Concrete Cutting P/L Jason FrankenPO Box 302Ocean Grove VIC 3226AUSTRALIATel: 61-3 5248 8009Email: supercity@bigpond.comwww.supercity.com.auServices: FS, CD, WL, WR, SD, CC

Brazil

EKIPE-C Federico del VillarRua Prof. Clemente Pinho, 182Sao Paulo-SP 04753-165BRAZILTel: 55-11 2884 4900Email: ekipe-c@ekipe-c.com.brwww.ekipe-c.com.brServices: FS, CD, WL, WR

Furofix Engenharia Ltda. Marcio TeodoroRua Camelias 79Belo Horizonte, Minas Gerais 30410-380BRAZILTel: 55-31 3372 1816Email: teodoro@furofix.com.brwww.furofix.com.brServices: FS, CD, WL, WR

Bulgaria

Nova Engineering Ltd. Vladimir Petrovul./str. Peyo Yavorov #1, Business Center “Ogosta” Office 306Montana BG-3400BULGARIATel: 359-8 7896 5838Email: info@nova-bg.comwww.nova-bg.comServices: FS, CD, WL, SD

Germany

Bohrtechnik Westerwald GmbH Rupert MarkoIm Churfeld 13-1556424 MoschheimGERMANYTel: 49-26 0269 074Email: marko@bohrtechnik-westerwald.dewww.bohrtechnik-westerwald.deServices: FS, CD, WL, WR, SD

Hong Kong

Concrete Coring Company of Hong Kong, Ltd. John D. Stallman99-1026 Iwaena StAiea, HI 96701Tel: 808-239-5539Email: jdstallman@earthlink.netServices: SD

Modern Concrete Drill Cut Co., Ltd. Bi Bi Wong Sze ChaiFlat B, 7/F, Ray Centre, 88 Hung To RoadKwun Tong, KowloonHONG KONGTel: 852-2342 9622Email: info@modernok.hkwww.mordernok.hk

Anuwrita Services Pvt. Ltd. Rahul A. Chawan1, Sharda Kutir, Dr Ambedker RoadMuland (W), Mumbai 400080 INDIATel: 91-22 2569 3708Email: anuwrita@gmail.comwww.cutsncores.comServices: FS, CD, WL, WR, SD

Sai Retrofabs Anand Gopalakrishan Ramakrishnan393, 28th Main, 1st Sector HSR LayoutBangalore 560102INDIATel: 91-98 4543 3300Email: sairetrofabs@gmail.comwww.sairetrofabs.comServices: FS, CD, WL, WR

Tondin srl Tiziano TondinVia dell’ Artigianato, 135010 Grantorto (PD) ITALYTel: 39-04 9949 0465Email: info@tondin.comwww.tondin.com

overseas contractors

Concrete Coring Company, Ltd. Jun Ozawa15-30, Sekimachiminami, 3-ChomeNerimaku, TokyoJAPANTel: 81-3 3928 3023Services: CD, WL, WR

Dai-Ichi Cutter Kogyo K.K.Yasushi Koike833 Hagisono, Chigasaki – ShiKanagawa-Ken 253-0071JAPAN81-4 6785 3939koike@daiichi-cutter.co.jpwww.daiichi-cutter.co.jp

New Zealand

A1 Kiwi Cutters & Drillers Ltd. Penny SimonsPO Box 90981, Victoria Street WestAuckland 1142 NEW ZEALANDTel: 64-9 420 3386Email: thegirls@kiwicutters.co.nzwww.kiwicutters.co.nzServices: FS, CD, WL, WR, CC

Cut ‘n Drill Concrete Services Limited Graeme ParrPO Box 5, PatumahoeAuckland 2344NEW ZEALANDTel: 64-9 0274 844112Email: grampa.bev@xtra.co.nzServices: FS, CD, WL, WR, SD, CC

Lowery Supa Cutters Limited John LoweryPO Box 301777Albany, Auckland 0752 NEW ZEALANDTel: 64-9 414 5050Email: john@lowery.co.nzwww.lowery.co.nzServices: FS, CD, WL, WR, SD, CC, GPR

Panama

Marine Metal Coatings, Inc. Harmodio Yuen, Jr.PO Box 0832-0733PanamaPANAMATel: 507-317-6535Email: hyuenjr@icloud.comwww.mmc.com.pa

Russia

CJSCEvgeniy ShkedovBuilding 22, Pcrovskaya Str., 1Moscow 111524Russia74956603873evgeniy@antibeton.ru

South Africa

AMFRA Maintenance Services cc Frans PrinslooPO Box 102128Meerensee, KwaZulu Natal 3901SOUTH AFRICATel: 27-35 751 1900Email: frans.amfra@vodamail.co.zaServices: FS, CD, WL, WR, SD

Holmes Sawing & Drilling Andrew Holmes22 Nipper RoadNew Germany, KZN 3620 SOUTH AFRICATel: 27-3 1705 1411Email: info@holmescsd.co.zawww.holmescutandseal.co.zaServices: FS, CD, WL, WR, SD, GPR

Q & A Coring Cutting & Sealing Henry DippenaarPO Box 2074Parys 9585SOUTH AFRICATel: 27-5 6817 7663Email: henry@qacoring.co.zawww.qacoring.co.za

T & K Lifts cc Kenneth CarpenterPO Box 2348 SouthdaleJohannesburg, Gauteng 2135SOUTH AFRICATel: 27-11 942 1306Email: t-klifts@iafrica.com

Trinidad & Tobago

B.T. Rentals Limited Bret Talma#13 Buller StreetWoodbrookTRINIDAD & TOBAGOTel: 868-628-2703Email: btrentals@gmail.comwww.btrentalstt.comServices: FS, CD, SD

United Arab Emirates

BT Patel Co. LLC Chandresh ParekhRas Al Khor Industrial Area, AwirDubai 88185UNITED ARAB EMIRATESTel: 971-4 320 5668Email: btpc@emirates.net.ae

Celtic Coring, LLC Liam WynneAl Khabaisi Building, 1st Floor Office No. 105-7, Port Saeed Road DeiraDubaiUNITED ARAB EMIRATESTel: 971-5 677 92332Email: liam@celticcoring.aewww.celticcoring.ae

United Kingdom

Core Cut Ltd. Finlay CrockerBankhead, Greendykes RoadBroxburn, West Lothian EH52 6PPUNITED KINGDOMTel: 44-15 0685 4710Email: finlay@corecut.co.ukwww.corecut.co.ukServices: FS, CD, WL, WR, SD

D-Drill Master Drillers Ltd. Julie WhiteShilton Industrial Estate, Bulkington RoadShilton, Coventry, Warwickshire CV7 9QLUNITED KINGDOMTel: 44-24 7661 2858Email: juliewhite@d-drill.co.ukWebsite: www.d-drill.co.uk

Holemasters Scotland Limited James McArthur114 Main Street, ChapelhallAirdrie, Lanarkshire ML6 8SBUNITED KINGDOMTel: 44-845 467 1500Email: jim.mcarthur@holemasters-scotland.co.ukwww.holemasters-scotland.co.uk

Kilnbridge Construction Services Limited John DevinMcDermott House, Cody Rd Business ParkSouth Crescent, London E16 4TLUNITED KINGDOMTel: 44-20 7511 1888Email: sales@kilnbridge.comwww.kilnbridge.comServices: FS, CD, WL, WR, SD, CC, GPR

Technical Concrete Cutting Ltd. Nigel Ostler-HarrisGreenlands House, Southbrook Road, West AshlingChichester, West Sussex PO18 8DNUNITED KINGDOMTel: 44-12 4357 2784Email: office@technicalconcretecutting.co.ukwww.technicalconcretecutting.co.ukServices: FS, CD, WL, WR, SD

manufacturers

Archer USA / Dexpan USA Yan An2031 Appaloosa DriveSunland Park, NM 88063Tel: 575-874-9188Email: sales@archerusa.comwww.dexpan.com

Concut, Inc. Tom Monaghan6815 S 220th StKent, WA 98032Tel: 253-872-3507Email: tom@concutusa.comwww.concutusa.com

CS Unitec, Inc. Thomas Carroll22 Harbor AveNorwalk, CT 06850Tel: 800-700-5919Email: info@csunitec.comwww.csunitec.com

Cyclone Diamond Products Ltd. Diane Webb107-2845 23 St NECalgary, AB T2E 7A4CANADATel: 403-250-5568Email: diane@cyclonediamond.comwww.cyclonediamond.com

Cyclone Diamond Products, Ltd. Ivan Luketic7973 Enterprise StBurnaby, BC V5A 1V5CANADATel: 604-879-2424Email: info@cyclonediamond.comwww.cyclonediamond.com

Diamond Products Jeff Nelson5578 E La Palma AveAnaheim, CA 92807Tel: 306-618-2606Email: jnelson@diamondproducts.comwww.diamondproducts.com

Diamond Products Greg Lipscomb700 Westlake Pkwy Ste 760Atlanta, GA 30336Tel: 877-472-2930Email: glipscomb@diamondproducts.comwww.diamondproducts.com

Diamond Products Larry Liddle1121 SW 28th StBlue Springs, MO 64015Tel: 816-220-1385Email: lliddle@diamondproducts.comwww.diamondproducts.com

Diamond Products Canada Rae Hudson6-335 Admiral BlvdMississauga, ON L5T 2N2CANADATel: 905-565-1355Fax: 905-565-9756Email: rhudson@diamondproducts.comwww.diamondproducts.com

Diamond Products Limited Larry Liddle333 Prospect StElyria, OH 44035Tel: 440-323-4616Email: lliddle@diamondproducts.comwww.diamondproducts.com

Diamond Systems, Inc. Don Graff39 Hale RdBrampton, ON L6W 3J9CANADATel: 800-387-2513Email: dgraff@dsidiamond.comwww.dsidiamond.com

Diamond Tech, IncSean Ward4355 Pacific St.Rocklin, CA 95677Phone: 916-624-1118Sean.ward@dtiinnovations.comwww.dtiinnovations.com

Diamond Tools Technology Roger Allen723 Hastings LnBuffalo Grove, IL 60089Tel: 877-345-6DTTEmail: info@diamondtoolstechnology.comwww.diamondtoolstechnology.com

Diamond Vantage, Inc. Jeff Shermo2025 Alton PkwyIrvine, CA 92606Tel: 866-322-4078Email: jshermo@diamondvantage.comwww.diamondvantage.com

Disco Abrasive America, Inc. Kyle Baek2320 E Artesia BlvdLong Beach, CA 90805Tel: 562-984-2600Email: kyle@discotools.comwww.discotools.com

DITEQ Corporation Mike Orzechowski1250 NW Main StLee’s Summit, MO 64086Tel: 866-688-1032Email: mikeo@diteq.comwww.diteq.com

Dixie Diamond Manufacturing Sid Kilgore205 Buxton CtLilburn, GA 30047Tel: 770-921-2464Email: skilgore@dixiediamond.comwww.dixiediamond.com

DP Grooving & Grinding Div. Todd Thompson1155 Post RdOakdale, CA 95361Tel: 800-225-0142Email: tthompson@diamondproducts.comwww.diamondproducts.com

EDCO-Equipment Development Co., Inc. Rich Quickel100 Thomas Johnson DrFrederick, MD 21702Tel: 800-638-3326Email: quickel@edcoinc.comwww.edcoinc.com

GDM Technologies Jennifer Speece1910 S Fremont DrSalt Lake City, UT 84104Tel: 805-964-4219Email: gdmsaws@yahoo.comwww.gdmsaws.com

Hilti, Inc. Steve Garrison6601 Darin WayCypress, CA 90630Tel: 714-230-7410Email: steve.garrison@hilti.comwww.us.hilti.com

Hilti, Inc. Jeremy Martin5400 S 122nd East AveTulsa, OK 74146Tel: 918-872-3080Email: jeremy.martin@hilti.comwww.us.hilti.com

Hoffman Diamond Products Frank Villella121 Cedar StPunxsutawney, PA 15767Tel: 814-938-7600Email: frankiev6@yahoo.comwww.hoffmandiamond.com

Husqvarna Construction Products N.A. Ron Rapper17400 W 119th StOlathe, KS 66061Tel: 913-928-1007Email: ron.rapper@husqvarna.comwww.husqvarnacp.com

manufacturers

ICS, Blount Inc. Kevin Warnecke4909 SE International WayPortland, OR 97222Tel: 503-709-1658Email: kwarnecke@icsbestway.comwww.icsbestway.com

K2 Diamond Mike Nelson23911 Garnier St Ste CTorrance, CA 90505Tel: 310-539-6116Email: mike.nelson@k2diamond.comwww.k2diamond.com

Kotkurb Equipement, Inc. Alex Bertrand-Thouin760 Rue RossiterSt-Jean-S-Ric, QC J3B 8J1CANADATel: 450-359-4040Email: alexbertrand33@gmail.com

Merit Engineering & Equipment Co Rita Vigil-FergusonPO Box 10215Santa Ana, CA 92711Tel: 928-771-0575Email: r.ferguson@meritsaw.comwww.meritsaw.com

Multiquip / Sanders Christopher Priest2470 Conestoga AveHoney Brook, PA 19344Tel: 310-850-5483Email: cpriest@multiquip.comwww.multiquip.com

Norton Pro Diamond Steve Anderson1345 S Acacia AveFullerton, CA 92631Tel: 714-776-6101Email: stephen.m.anderson@saint-gobain.comwww.nortonprodiamond.com

Patriot Diamond, Inc. Richard Rice2631 E Oakland Park Blvd Ste 109Ft. Lauderdale, FL 33306Tel: 954-563-8294Email: richard@diamondblade.comwww.diamondblade.com

Pentruder, Inc. Terry Martin6501 W Frye Rd, Ste 14Chandler, AZ 85226Tel: 562-445-6429Email: terry.pentruderinc@gmail.comwww.pentruderinc.com

PrimeSource Building Products Kyle Thuenemann1321 Greenway DrIrving, TX 75038Tel: 972-999-8631Email: thuenemannk@primesourcebp.comwww.grip-rite.com

Protech Diamond Tools, Inc. David Youwei Liao2-4639 6 St NECalgary, AB T2E 3Z6CANADATel: 403-230-8826Email: ldavidliao@hotmail.comwww.protechdiamondtoolsinc.com

Protech Diamond USA, Inc. Gordon Ferries-Scott7312 Alondra BlvdParamount, CA 90723Tel: 562-817-5642Email: gordon.f-s@protechdiamondusa.comwww.protechdiamondusa.com

Quanzhou Zhongzhi Diamond Tool Co., Ltd. Tyler KangWan’an Industrial Zone, Luojiang QuanzhouQuanzhou, Fujian 362000, CHINATel: 86-595-22635005Email: tyler_kang@zhongzhi.bizwww.zhongzhi.biz

RGC / Reimann & Georger Corp. Mark Bossert1849 Harlem RdBuffalo, NY 14212Tel: 800-742-8665Email: sales@rgcproducts.comwww.rgcproducts.com

Shibuya Company, Ltd. Norikazu Shibuya5-86, Mokuzaiko-kitaHatsukaichi, Hiroshima 738-0021JAPANTel: 81-8 2934 4510Email: boueki@shibuya-group.co.jpwww.shibuya-group.co.jp

SpiderCut Systems, LLCRoger Drissel812 Brookview AveBurlington, WI 53105262-763-9002rdrkw@aol.comwww.spidercut.net

Stihl, Inc. Daniel Pherson536 Viking DrVirginia Beach, VA 23452Tel: 757-486-9212Email: daniel.pherson@stihl.uswww.stihlusa.com

Terra Diamond Industrial Judith O’Day1910 S Fremont DrSalt Lake City, UT 84104Tel: 801-977-0054Email: joday@terradiamond.comwww.terradiamond.com

Toolgal USA Industrial Corp. David Ginzburg283-A Tribble StElberton, GA 30635Tel: 706-283-9556Email: ginzburgd@toolgalusa.comwww.toolgal.com

Wolverine Equipment Bill Darling6815 S 220th StKent, WA 98032Tel: 253-867-6209Email: bill@wolverineequipment.comwww.wolverineequipment.com

distributors affiliates

Ace Cutting Equipment & Supply, Inc. Ron Measel25806 Novi RdNovi, MI 48375Tel: 248-449-4944Email: sales@acecutting.comwww.acecutting.com

Brokk, Inc. Peter Bigwood1144 Village WayMonroe, WA 98272Tel: 877-BROKK-ITEmail: peter@brokkinc.comwww.brokk.com/us

Diamond Blade Warehouse Joe Russo588 Lakeview PkwyVernon Hills, IL 60061Tel: 800-325-2337Email: jrusso@diamondbladewarehouse.comwww.diamondbladewarehouse.com

Diamond Blade Warehouse Jon Hartmann588 Lakeview PkwyVernon Hills, IL 60061Tel: 800-325-2337Email: jhartmann@diamondbladewarehouse.comwww.diamondbladewarehouse.com

Diteq Tools (M) Sdn. Bhd.Alan TanNo.35, Jalan 3/108C, Taman Sungai Besi57100 Kuala LumpurMALAYSIATel: 603-7987 8770Email: alan@coolman.com.mywww.coolman.com.my

Esch Construction Supply, Inc. Dan Esch561 Phalen BlvdSt. Paul, MN 55130Tel: 651-487-1880Email: dane@eschsupply.comwww.eschsupply.com

Glacier Diamond, Inc. Jeff Hayden4410 E La Palma AveAnaheim, CA 92807Tel: 714-854-9600Email: glacierana@gmail.com

ProContractor Supply, Inc. Mark Clements3917 Old Flowery Branch RdOakwood, GA 30566Tel: 770-287-8555Email: mark.procontractor@charter.netwww.procontractorsupplyinc.com

V-Belt Global Supply Dan Eppinga1401 W. Bailey St.Sioux Falls, SD 57104Tel: 888-291-5450Email: dan@vbeltsupply.comwww.vbeltsupply.com

Anzeve Antonio ZeroloDiego Marín Aguilera, 4 Parque Tecnológico de Leganés28918 Leganés (Madrid), SPAINTel: 34-9 1633 4553Email: antonio.zerolo@anzeve.comwww.anzeve.com

Apollo General Insurance Agency, Inc. Robert C. Elster, Jr.389 4th St ESonoma, CA 95476Tel: 707-996-2912 x17Email: bobe@apgen.comwww.apgen.com

ATS Machine & Tool Co., Inc. Robert Dutko7750 Division DrMentor, OH 44060Tel: 440-255-1120Email: rdutko@atsmachine.comwww.atsmachine.com, www.seg-die.com

Business Networks Les CunninghamPO Box 175Walterville, OR 97489Tel: 800-525-1009Email: les@businessnetworks.comwww.businessnetworks.com

Carmenita Truck CenterPartick O’Brien13443 E Freeway DrSanta Fe Springs, CA 90670562-977-2208pobrien@carmenita.com

CentralPoint Solutions, LLC Jay Shaver13218 S 5700 WHerriman, UT 84096Tel: 801-232-9768Email: jay@cenpoint.comwww.cenpoint.com

Company Wrench Brad Hutchinson4805 Scooby LnCarroll, OH 43112Tel: 740-654-5304Email: brad@companywrench.comwww.companywrench.com

Construction Solutions, LLC Rick Norland24564 Lackman RdPaola, KS 66071Tel: 913-879-2200Email: rnorland@construction-solutions.comwww.construction-solutions.com

Diamond Innovations, Inc. Martin Deakins6325 Huntley RdWorthington, OH 43085Tel: 614-438-2000Email: martin.deakins@diamondinnovations.comwww.diamondinnovations.com

Di-Tech Restoration, Inc. Tom DwyerPO Box 4 GRP 525 RR 5 STN TransconaWinnipeg, MB R2C 2Z2CANADATel: 204-777-6582Email: tom@di-techrestoration.comwww.di-techrestoration.com

Dr. Fritsch Sondermaschinen GmbH Volker WornDieselstrasse 8D-70736 Fellbach GERMANYTel: 49-711 518 320Email: volker.woern@dr-fritsch.dewww.dr-fritsch.de

Expert Equipment Company Markus Bartl7201 Wynnpark DrHouston, TX 77008Tel: 713-797-9886Email: info@expertequipment.comwww.expertequipment.com

GelMaxx Skip Edwards9437 Wheatland CourtSantee, CA 92071Tel: 855-322-3335Email: sedwards@gelmaxx.netwww.gelmaxx.net

GMI Engineered Products Gail Bowman3600 Township Rd 27Bluffton, OH 45817Tel: 419-408-5906Email: gbowman@gmi-floors.com

Grabber Power Products, ACC Jorge Garcia226 S Price RdTempe, AZ 85281Tel: 480-967-2545Email: jorge@grabberpower.comwww.grabberpower.com

GSSI, Inc. Matt Dragon12 Industrial WaySalem, NH 03079Tel: 800-524-3011Email: dragonm@geophysical.comwww.geophysical.com

affiliates

Hicycle Motor Manufacturing, Inc. Larry “Ty” Goodwin29115 S Hult RdColton, OR 97017Tel: 503-824-6119Email: hicyclemotors@colton.com

Holer Diamond Tools Phil HolerPO Box 3464, 65 Main RoadRichmond, Nelson 7050 NEW ZEALANDTel: 64-3 543 9750Email: phil.holer@holer.co.nzwww.holer.co.nz

Hylant GroupKristen Long150 N Wacker Dr Ste 1500Chicago, IL 60606Tel: 312-283-1322Email: Kristen.long@hylant.comWebsite: www.hylant.com

Keeling Group Frank Keeling14204 Benson StOverland Park, KS 66221Tel: 913-544-4485Email: frank@keelinggroup.com

LIUNA Local 506 Training Centre Ted Gedney1600 Major Mackenzie Dr ERichmond Hill, ON L4S 1P4CANADATel: 905-883-4268Email: tgedney@506tc.orgwww.506tc.org

Mala Geoscience USA, Inc. Matthew J. Wolf465 Deanna LnCharleston, SC 29492Tel: 843-852-5021Email: matt.wolf@malags.comwww.malags.com

McKay Lodge Conservation Lab, Inc. Robert G. Lodge10915 Pyle South Amherst RdOberlin, OH 44074Tel: 440-774-4215Email: mckaylodge@gmail.com

National Research Company Wilson Born55911 Gratiot AveChesterfield, MI 48051Tel: 586-749-0100Email: natrechco@yahoo.comwww.nationalresearchcompany.com

O’Brien International Patrick O’Brien13577 Feather Sound Dr Ste 560Clearwater, FL 33762Tel: 727-577-5002Email: pat@obrienintl.comwww.obrienintl.com

Peak Software Systems, Inc. Charles Warrell45 W 9000 S Ste 2Sandy, UT 84070Tel: 801-572-3570Email: cwarrell@peakinfo.comwww.peakinfo.com/dsm

Prism Corporation Terry Fenelon1251 Arundel StSt. Paul, MN 55117Tel: 651-488-4250Email: tfenelon@prismpigments.comwww.prismpigments.com

Riways Technologies William LeePO Box 2264Menlo Park, CA 94025Tel: 650-400-7500Email: wmwtlee@netscape.net

Robert Bosch Tool Corporation Matt Van1800 W Central RdMount Prospect, IL 60056Tel: 224-232-2385Email: matt.van@us.bosch.comwww.us.bosch.com

SIS, LLC Robert Black2949 Green Valley RdBirmingham, AL 35243Tel: 205-919-5946Email: rob.black@sisgpr.com

Slurry Solutions a Division of Golz Mark Critchfield2101 W Broadway #164Columbia, MO 65203Tel: 573-219-7330Email: slurrysolutions@gmail.comwww.goelz-online.com / www.slurrysolutions.com

Traxx Construction Products Lloyd WilliamsUnit 4/1 Rocklea DrPort Melbourne VIC 3207AUSTRALIATel: 61-3 9646 9200Email: info@traxxcp.com.auwww.traxxcp.com.au

Vac-Tron Equipment LLC Don Buckner27137 South Highway 33Okahumpka, FL 34762Tel: 352-728-2222Email: info@vactron.comwww.vactron.com

Western Saw, Inc. Kevin Baron3200 Camino Del SolOxnard, CA 93030Tel: 805-981-0999Email: kevinb@westernsaw.comwww.westernsaw.com

Widerman & Company Curt Dumbleton70 Tanner StHaddonfield, NJ 08033Tel: 856-428-0939Email: cdumbleton@widerman.comwww.widerman.com

Yardstick Software Greg Kureluk200-8616 51 Ave NWEdmonton, AB T6E 6E6CANADATel: 780-409-5606Fax: 780-409-9138Email: greg@getyardstick.comwww.getyardstick.com

reciprocal associations

Aideco Dr. Ing. Andrea SchiattiViale Misurata 3220146 Milano (MI) ITALYTel: 39-02 423 7119Email: aideco@tiscali.itwww.aideco.it

American Society of Concrete Contractors Bev Garnant2025 S Brentwood Blvd Ste 105St. Louis, MO 63144Tel: 314-962-0210Email: bgarnant@ascconline.orgwww.ascconline.org

CDSDMA John McKibbonTel: 905-840-1150Fax: 905-840-1620Email: jmckibbon@rogers.com

Concrete Sawing & Drilling Association Australia Jason Franken20 Queens RoadMelbourne VIC 8004 AUSTRALIATel: 61-3 9867 0221Email: carolyn.macgill@aigroup.asn.auwww.csdaa.com.au

Drilling & Sawing Association Ltd. Joel VinsantUnit 3 Brand Street, Off Meadow LaneNottingham, NG2 3GWUNITED KINGDOMTel: 44-84 4879 3452Email: dsa@drillandsaw.org.ukwww.drillandsaw.org.uk

Fachverband Betonbohren und-Sagen Hans-Georg WagenerGrosse Allee 6034454 Bad Arolsen GERMANYTel: 49-56 9175 98Email: info@fachverband-bohren-saegen.dewww.fachverband-bohren-saegen.de

Florida Independent Concrete & Associated Products Michele Stropoli116 W Greentree LnLake Mary, FL 32746Tel: 407-333-4694Email: michele@ficap.orgwww.ficap.org

Håltagnings Entreprenörerna Carl BendeforsStorgatan 19, Box 5054SE-102 42 Stockholm, SWEDENTel: 46-8 698 5800Email: haltagning@bygg.orgwww.haltagningsentreprenorerna.se

IACDS/IVBS Daniel TrachselOberdorfstr. 40/POBox 603CH-3053 Münchenbuchsee SWITZERLANDTel: 41-3 1858 2220Email: info@iacds.orgwww.iacds.org

JCSDA Masanobu Takagi4-8-412, 1-Chome, GotandaShinagawa-Ku, Tokyo 141-0000 JAPANTel: 81-3 3490 3217Email: info@jcsda.gr.jpwww.jcsda.gr.jp/e_index.htm

National Demolition Association Michael R. Taylor, CAE16 N Franklin St Ste 203Doylestown, PA 18901Tel: 215-348-4949Email: mtaylor@demolitionassociation.comwww.demolitionassociation.com

NZ Concrete Sawing & Drilling Association Carol KennedyPO Box 302 486, North HarbourAuckland 0751 NEW ZEALANDTel: 64-9 442 426Email: info@nzcsda.co.nzwww.nzcsda.co.nz

Rabuso Comunicación, S.L./AEDT Jose BlancoAv. Rey Juan Carlos 92, P. 4, Of. 1028916 Leganés (Madrid) SPAINTel: 34-9 1277 2036Email: info@aedt.eswww.aedt.es

SMI / AEM Mark Benishek6737 W Washington St Ste 2400Milwaukee, WI 53214Tel: 414-274-0670Email: mbenishek@aem.orgwww.aem.org

SVBS Willy AutenriedBahnhofstrasse 7d, Postfach 528CH-4512 Bellach/SO SWITZERLANDTel: 41-3 2618 1050Email: info@svbs.chwww.svbs.ch

Tennessee Concrete Association Alan Sparkman705 Fort Negley CtNashville, TN 37203Tel: 615-360-7393Email: asparkman@tnconcrete.orgwww.tnconcrete.org

UTCA of NJ Michael DeVitoPO Box 728Allenwood, NJ 08720Tel: 732-292-4300Email: mike@utcanj.orgwww.utcanj.org

VBS - Austria Ingo HaemmerleRütte 40A-6840 Götzis AUSTRIATel: 43-5 5236 4267Email: ingo.haemmerle@vol.atwww.vbs.co.at

Member BenefitsNetworking at the Annual Convention and Quarterly MeetingsThe number one benefit for members has always been the opportunity to network with cutting professionals at the annual convention and quarterly meetings. This networking provides opportunities to forge new relationships and learn from other experienced professionals.

CSDA Training and Certification ProgramsOver 3,000 members have graduated from more than 20 classroom, hands-on and online training programs. In addition, CSDA has certification programs for companies and individual operators. See pages 8 and 9 for more details.

CSDA Safety Resources and Toolbox Safety Tips (TSTs)The 230-page CSDA Safety Manual, CSDA 57-page Safety Handbook and five safety DVDs are designed specifically for concrete cutters and are available to members at a significant discount. TSTs can be used in employee safety meetings and can be an important part of your company’s safety program. CSDA has released a total of 100 TSTs since the program began. A new TST is released every month.

Representation with Governmental OrganizationsCSDA has an Alliance with OSHA to advance the safety of cutting contractors. This partnership included issuing Best Practice and Toolbox Safety Talk documents, joint exhibitions at trade shows, review of safety materials and round tables.

World of Concrete Co-SponsorMembers receive free registration and significant discounts on educational seminars fees. CSDA also supports the industry by exhibiting at this event and sponsoring seminar sessions.

Concrete OpeningsConcreteOpenings at www.concreteopenings.com is the only professional magazine dedicated to concrete cutting with a circulation of 17,000 per issue. Members can advertise at significant discounts and use the opportunity to have their job stories reach over 7,000 architects, engineers, general contractors and government officials.

CSDA Next Generation GroupThe group aims to continue the growth of the association while serving the needs and wants of the younger generation, with the goal of continuing to set a standard of excellence.

Mentor ProgramNew Members can receive personalized assistance from a current CSDA Board or Committee member during their first year of membership.

Market Intelligence• Helps you plan, measure, understand trends and markets. • 3rd party non biased market research• Surveys and reports

Other benefits and programs can be reviewed by visiting the CSDA Website at www.csda.org or call the CSDA office at 727-577-5004.

Discount ProgramsThe Association negotiates member benefit programs with national vendors in order to provide cost-savings opportunities for CSDA Members.

• staples• uPs freight• V-Belt

CSDA WebsiteThe CSDA Website at www.csda.org contains a wealth of information available 24/7 in the “Members” section. The online discussion boards also provide members a forum to discuss technical issues, sell equipment, hire employees or any other relevant topics.

Membership Applicationcompany information

COMPANY

ADDRESS

CITY STATE/PROVINCE

ZIP/POSTAL CODE COUNTRY

PHONE FAX

WEB ADDRESS

OFFICIAL REPRESENTATIVE

OTHERS PARTICIPATING IN CSDA ACTIVITIES

PRINCIPAL BUSINESS ACTIVITY

background information

START UP DATE YEARS IN BUSINESS

AVERAGE ANNUAL GROSS INCOME $

ANNUAL GROWTH RATE

NO. BRANCH LOCATIONS NO. EMPLOYEES

CONTRACTORS: NO. TRUCKS

PRINCIPALS/OWNERS OF BUSINESS

OTHER PROFESSIONAL ASSOCIATION MEMBERSHIPS

contractors only—CHECK BELOW TO IDENTIFY THE SERVICES YOU OFFER, WHICH WILL BE LISTED IN THE PRINT AND ONLINE DIRECTORIES:

FLAT SAWING CORE DRILLING WALL SAWING WIRE SAWING

SELECTIVE DEMOLITION CURB CUTTING GROUND PENETRATING RADAR

CONCRETE POLISHING SURFACE PREPARATION SLURRY RECYCLING

membership dues schedule please circle your dues amount

GROSS SALES NORTH AMERICAN CONTRACTOR POLISHING CONTRACTOR GPR IMAGING CONTRACTOR MANUFACTURER DISTRIBUTOR OVERSEAS CONTRACTOR AFFILIATE*

$0–1M $565 $750 $1,200 $875

$1–2M $920 $1,490 $1,120

$2–3M $1,390 $2,210 $1,655

$3M–5M $1,875 $1,250 $750

$3,565 $390

$5–10M $2,355 $4,785 $2,670

>$10M $2,975 $5,945

COMPANY ANNUAL DUES (FROM ABOVE)

ADDITIONAL BRANCH LOCATIONS ($130 PER LOCATION)

CSDA WEBSITE HOTLINK ($100) links direCtly tO yOur COmpany website

CSDA • 13577 FEATHER SOUND DRIVE, SUITE 560, CLEARWATER, FL 33762 • TEL: 727.577.5004 • FAX: 727.577.5012 • E-MAIL: INFO@CSDA.ORG • WWW.CSDA.ORG

*AFFILIATE: A person, firm, corporation, society, government agency or other organization providing services to the concrete sawing and drilling industry.

payment

$ANNUAL MEMBERSHIP TOTAL

CHECK ENCLOSED (US FUNDS AND DRAWN ON A US BANK) VISA MASTERCARD DISCOVER

CARD NO.

EXPIRATION DATE 3-DIGIT VERIFICATION (CSC)

NAME ON CARD

BILLING ADDRESS

SIGNATURE

membership dues

In addition to this printed Membership Directory, the CSDA Website includes a “Find a Member” search tool on its home page, where specifiers of concrete cutting can locate a professional CSDA contractor serving their area through an interactive map. Simply click on an individual state or area to be presented with a list of members from that state, or use the drop-down boxes to enter more specific search criteria. Results can be printed, including full contact details for each contractor, and a map is provided to show the exact geographical location of each company. Visit www.csda.org and click on the map icon to get started.

Find a Member Online

List of Topics*

A. SpecificationsCore Drilling CSDA-C-101Flat Sawing CSDA-F-102Track-Mounted Wall Sawing CSDA-W-104Wire Sawing CSDA-WS-106Hand Sawing CSDA-HS-108Chain Sawing CSDA-CS-109Diamond Blade CSDA-DB-112Polishing Concrete CSDA-PC-113

B. StandardsBlade Application Code for Diamond Saw Blades CSDA-BC-107Bolt Together Core Bits CSDA-BB-110Continuous Tube Threads CSDA-CT-111

C. TolerancesTolerances and Limits for Construction Drilling and SawingBasic Parameters for Concrete Drilling and Sawing Equipment

D. Best PracticesSlurry CSDA-BP-001Equipment Maintenance Management CSDA-BP-002Hazard Identification and Debris Removal CSDA-BP-003Introduction to Remote Control CSDA-BP-004Diamond Cutting Tools for ADA CSDA-BP-005Hydraulic Concrete Cutting Equipment CSDA-BP-006 Ground Penetrating Radar for Concrete Scanning CSDA-BP-007 Polished Concrete Floors CSDA-BP-008 Green Construction CSDA-BP-009 Hi-Cycle Concrete Cutting Equipment CSDA-BP-010Establishing and Maintaining the Work Area CSDA-BP-011Mechanical Anchors CSDA-BP-012Care of Quick Disconnect Flanges CSDA-BP-013

E. CSDA/OSHA Alliance Best PracticesHighway Work Zone Safety CSDA-OBP-1001Reducing Silica Exposure CSDA-OBP-1002Defensive Driving CSDA-OBP-1003 Electrical Safety CSDA-OBP-1004Scaffold Safety CSDA-OBP-1005Ladder Safety CSDA-OBP-1006Distracted Driving CSDA-OBP-1007Hearing Conservation CSDA-OBP-1008

Section 3: Resource Guide

* All of these documents are available online at CSDA.org.

Download the entire CSDA 2013–2014 Resource Guide today!Use the QR Code or Visit www.csda.org.

SafetySawing and drilling are non-disruptive demolition methods that are vibration-free and allow for job completion with reduced noise, dust and debris. Professional sawing and drilling operators are committed to safety and follow appropriate cutting procedures.

Time SavingsSawing and drilling with diamond blades, core bits or wire saws are faster than comparable renovation or demolition methods. Professional cutting contractors have the knowledge to evaluate each unique job situation and determine the best approach. They are efficient and skilled, and they get the job done right the first time.

Cost Savings Diamond cutting systems provide significant cost advantages over conventional removal methods. These include increased productivity, reduced downtime and fewer operators needed to accomplish the job. Cutting professionals are well prepared to bring projects in on time and within budget.

Reduction of LiabilityGeneral contractors and other specifiers can reduce their liability by entrusting their sawing and drilling job to trained cutting professionals who are experts in their field. These professionals have the training and experience to select the best sawing and drilling procedures to employ at any stage of a project.

Seven Reasons to Specify Sawing and Drilling

Quality of WorkCutting contractors know which types and sizes of saw blades, drill bits and diamond wires are best for each application, and they have a good understanding of working clearance, disposal and other construction site issues. They create cuts to the dimensions required while overcoming challenges such as heavily reinforced concrete, confined spaces and time constraints.

Latest TechnologyModern, efficient cutting equipment can be used for a wide range of applications. The equipment provides large bulk removal capability while allowing for precision cuts and maintaining structural integrity. This equipment is also designed to create minimal disruption to the surrounding job site.

Access to CSDA ResourcesSpecifiers have access to professional CSDA sawing and drilling contractors, including those who have achieved Certified Operator status or have attained Level 1, 2 or 3 Company Certification by completing industry-specific certification programs.

Download the entire CSDA 2013–2014 Resource Guide today!Use the QR Code or Visit www.csda.org.

Architects, engineers, general contractors and government officials—virtually everyone who is involved in specifying sawing, drilling, pollishing, and imaging services in their daily work, have 24/7 online access to the Concrete Sawing & Drilling Association’s (CSDA) resource guides and specifications. Besides offering the Resource Guide as a printed document, CSDA also has this guide available electronically and free of charge at www.csda.org. The Resource Guide is just one of the tools that CSDA provides for specifiers. The Architect/Engineer Resources section on the home page of the CSDA Website includes a “Need a Contractor” feature, where specifiers can submit project details and request bids from CSDA contractors by completing of a simple online form. This area of the website also contains PDF versions of individual Standards, Specifications, Tolerances and Best Practices. In addition, each sawing and drilling job story published in Concrete Openings magazine can be downloaded for reference from the Techniques page of www.concreteopenings.com, where they are arranged by application.

Online Specifier Resources from CSDA

Concrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560

Clearwater, FL 33762Tel: 727-577-5004

www.csda.org

The Concrete Sawing & Drilling Association is a nonprofit trade association of contractors, manufacturers and affiliated members from the construction and renovation industry. Diamond tools for

projects requiring sawing, drilling, selective demolition, cutting and polishing offers the construction industry many benefits including

lower total project costs, precision cutting, maintenance of structural integrity, reduced downtime, reduced noise, dust and debris, limited

access cutting and the ability to cut heavily-reinforced concrete. Founded in 1972, CSDA has 500 member companies worldwide.

Concrete Sawing & Drilling Association13577 Feather Sound Drive, Suite 560

Clearwater, FL 33762Tel: 727-577-5004

www.csda.org

backcover.pdf 10 4/22/13 4:36 PM

2013–2014 membership directory - c.ymcdn.comc.ymcdn.com/sites/ · pdf filemembership...

Documents

ldap - osnovedandroic/nastava/mr/ldap.pdf · apple open...

active directory light directory service (adlds)

network architecture & active directory … architecture &...

directory plan – – directory design guide –

understanding active directory domains and trusts...

understanding active directory level 100 · pdf file ...

active directory infraestrutura do active directory

membership renewal procedure - iobc-wprs · pdf...

06 active directory lightweight directory services

contents.cdn.cityofsydney.nsw.gov.au/learn/history/archives/sands/1920-1924/... ·...

membership directory july 2010 - · pdf filemembership...

membership - national churchill museum · pdf filemembership...

india business directory list, india business list, india...

049 22 gemerská poloma...Školský klub detí pri...

membership directory and buyers’ guide 2013 · pdf...

“the pentecostal movement” - hartford...

membership and registration rules - sec.gov · pdf...

~oo~::00;0 '~l - poloma · 2015-04-15 · brantner nova,...

business directory - 2014 business card directory

active directory directory searcher