2016 climb price guide - business...
Post on 06-Feb-2018
216 Views
Preview:
TRANSCRIPT
PRICE LIST
2016 CLIMB
Multi-Level Seating
Updated 5-17-2016
Nevins Freight
All prices are LIST
All prices are LIST. We reserve the right to change prices without prior notification at any time. There is a $99 minimum order surcharge for all orders less than $2,000 NET and for orders $2,000 NET and over, a Freight Fee equaling 5% of the orders NET value applies. Nevins reserves the right to add an additional surcharge for Custom or Stone Products. This surcharge will be calculated depending on the type, size and destination of the product.
Terms : Conditions : WarrantyPlease refer to our website www.nevins.co
CredenzasMulti‐Media Cabinets
BenchesLecterns, Visual/White Boards
GSA Contract AdministratorB Nevins LtdP.O. Box 108Cat Spring, TX 78933
Phone (800) 231‐2744Fax (713) 230‐2150customerservice@nevins.co
Contract Number ‐ GS‐28F‐0039PSIN 711‐2: SIN 711‐3: SIN 711‐11: Conferencing Tables, Drums & Cubes,
Multipurpose Tables, Occasional Tables
SIN 711‐12: Meeting & Training Tables, Table Carts
SIN 711‐16: SIN 711‐20:
Contact Information
GSA Information
For GSA net prices please refer to Nevins General Services Administration Approved Price Lists.
CliMb CollectionMulti‐Level Seating
MATERIALS AND FINISHESConstruction 3Power Units 3Upholstery
General Information 4COM / COL Information 5Graded‐In Fabrics 6Fabric Approval Form 7Contrasting Fabric Sketch Form 8
CONFIGURATIONS 9‐10
OVERVIEW 11‐12
PRICING 13
Table of Contents
HOW TO SPECIFY 14
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co
Multi‐Level Seating
Cove Silver Black White Power OnlyCOV2 (2 Pwr) COV2S COV2B COV2WCOV4 (4 Pwr) COV4S COV4B COV4W
Power / Charging USBCOV1U (1 Pwr / 2 USB) COV1US COV1UB COV1UW
Interior Frame COV3U (3 Pwr / 2 USB) COV3US COV3UB COV3UW
Back : Seat
POWER UNITS
Interior frame is constructed of 3/4" engineered plywood and 5/4 soft maple. Joinery is mortise and tenon puzzle frame technology, properly glued, clamped and stapled for maximum joint stability. Corners are reinforced using corner blocks and metal brackets that are securely fastened with glue and screws/staples. All interior wood components meet or exceed CARB Regulations. All engineered plywood used in the construction meets ANSI/HPVA HP‐1 standards.
All Climb upholstery features a saddle stitch with tape reinforcing fabric detail that not only dramatically increases the seam strength, but enhances the seam detail for a clean crisp appearance. The seat and back are upholstered with a tight pull‐over style and padded with a 1.8/90 high density foam. The seat frame utilizes a solid seat platform which greatly increases strength and sustains a resistance to the rigors of high traffic environments. Climbs’ seating comfort is achieved by a design that allows the body to find the most comfortable posture/position and utilizes a full 1 1/2‐inch‐thick cushion of 1.8/90 high density foam. All outside surfaces are padded with a 1” thick 1.8/90 foam. All foam meets California 117 fire code specification.
CONSTRUCTION
Seating
Option Code
CliMb Collection
SPECIFICATIONS
All specifications stated herein are subject to change without notice. Any productdimensions stated herein are nominal.
California 117 Fire Code
California 133 Fire Code
All of Nevins upholstered seating products conform to California Technical Bulletin 117.
Nevins can enhance seating components to include a Burngard barrier cloth. When a Burngard barrier cloth is used in conjunction with a CAL 133 certified fabric, the product can meet CAL 133 testing criteria. Please contact Nevins Quotation Department.
3 MATERIALS and FINISHES
Puddling
COM/COL Approval
Fabric Warranty
Multiple Quantities
Combination Fabrics
Upholstery ApplicationAll fabrics will be cut, seamed and applied at the discretion of the factory. railroad application is the standard application method. Any special instructions regarding the application of the fabric (pattern, direction, face side, etc.) must be indicated on your order In the absence of instructions Nevins will apply the fabric at our own
CliMb upholstered seating products are available with the Customer's Own Material (COM) or Leather (COL).
All COM/COL fabrics must be tested and approved by Nevins. A completed Fabric Approval Form and (2) 4" x 4" memo samples of the fabric to be tested must be submitted to Nevins Customer Service Department. Please allow 5 business days (from sample receipt by Nevins) for testing and notification of written approval by Nevins
COM/COL orders cannot be scheduled for production or acknowledged with a ship date until the COM/COL swatches are approved and the required yardage/square footage has been received, inspected and approved by Nevins. All COM/COL shipments must be shipped prepaid.
Modular Lounge SeatingCliMb Collection
General Information
Puddling may occur as a result of certain climate conditions and/or the natural stretch inherent in fabrics and leathers. Puddling is not a flaw in the fabric, leather or manufacturing process. Nevins cannot predict or be responsible for how upholstery wears in an installation setting and does not guarantee against puddling.
Nevins will not be held responsible for wear, fading, performance, appearance, behavior, flame retardency or durability of any fabrics or leather whether supplied by the Customer or by Nevins. Graded‐In, COM or COL fabrics are not covered under Nevins Warranty.
When ordering multiple quantities, yardage requirements may be reduced. Please contact Nevins Customer Service Department for yardage requirements on multiple quantities.
UPHOLSTERY UPHOLSTERY (continued)
Contrasting fabrics may be specified on the seat (a), side panels (b) or back (c). Contrasting fabric applications must be clearly indicated on the customer's order. A completed Contrasting Fabric Sketch form must be submitted along with the Fabric Approval form. An upcharge of $55 list applies; per additional fabric, per unit.
General Information (continued)
Fabric and Leather Imperfections
Protective Fabric Finishes and Backings
For reversible fabrics, a swatch of the COM must be provided to Nevins, clearly indicating which side should be exposed. In the absence of instructions, the factory will apply material at their own discretion without liability.
Backing RequirementsNot all fabrics are suitable for upholstery and some may require an acrylic backing to prevent unraveling or stretching. This is determined when the fabric arrives and is inspected. When this occurs, the customer will be notified of the applicable fees.
Many textile manufacturers offer a wide array of protective finishes, custom backings and flame‐retardant treatments. Some of the available treatment options include, but are not limited to, Crypton®, Gore Seating Protection®, Nano‐Tex®, Nano‐Tex with Durablock®, Teflon® and MicroB®. Please contact your textile manufacturer for
Should a COM be striped or have a pattern repeat requiring matching, a matching charge may apply. Please contact Nevins Customer Service Department.
order. In the absence of instructions, Nevins will apply the fabric at our own discretion, without liability.
Nevins reserves the right to reject any fabric deemed unsuitable for upholstery purposes. Nevins inspects fabrics for mill imperfections, however, Nevins will not be held responsible for defects, color inaccuracies, dye lot variations or other such flaws.
Leather is a natural product. Imperfections such as wrinkles and scars are considered normal and acceptable. Nevins is not responsible for the placement or appearance of these markings. Customer's leather must meet minimum standards of no more than three defects per hide. Imperfections that penetrate the hide, large marks, brands, excessively healed‐over scars or scratches, burns and excessive fat wrinkles are considered unacceptable defects.
For striped or patterned fabrics, specify vertical or horizontal application. In the absence of instructions, Nevins will apply the fabric pattern at our own discretion without liability.
Reversible Fabrics
Striped or Patterned Fabric
Pattern Matching
assistance on finishes to enhance the performance or application of your fabrics.
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co CLIMB MULTI‐LEVEL SEATING 4
COM Recommended Yardage Requirements
a.1 Single Fabric Applications Fax a completed Fabric Approval Form to 713‐230‐2150.
1‐5" 6‐9" 10‐13" 14‐20" 21‐27" 28‐36"54" 15% 18% 25% 30% 35% 40% a.2 Contrasting Fabric Applications 50" 20% 25% 30% 35% 40% 45%48" 25% 30% 35% 40% 45% 50%
b.1 Attach (2) 4" x 4" memo samples of the fabric(s) to be tested to the Fabric 1‐5" 6‐9" 10‐13" 14‐20" 21‐27" 28‐36" Approval Form and, if applicable, the Contrasting Fabric Sketch Form.
54" 10% 15% 20% 25% 30% 35%50" 15% 20% 25% 30% 35% 40% b.2 Submit completed form and swatches, prepaid to :48" 20% 25% 30% 35% 40% 45%
Right‐Way Application Railroad Application
COM / COL Information (continued)
CliMb Collection
UPHOLSTERY (continued) UPHOLSTERY (continued)
Multi‐Level Seating
Additional COM Yardage Guideline
Right‐Way (Up the Roll) Applications (Optional; Must be Requested)
Fabric Width
Non‐Directional Fabric
Repeat
0%
Railroad Applications (Standard)Fabric Width
Non‐Directional Fabric
Repeat
0%15%
15%
COM / COL Information
20%
20%
COL square footage requirements are determined by the hide type, shape and usable, clean square footage. All leather must be approved by Nevins; see "Ordering COM/COL" below. Contrasting leathers may be specified for the seat (a), side panels (b) or back (c). Contact Nevins Customer Service Department for assistance in determining square footage requirements.
Ordering COM/COLa) Obtain Nevins COM/COL Approval
Fax a completed Fabric Approval Form and Contrasting Fabric Sketch Form to 713‐230‐2150.
b) Ship memo Samples and completed form(s) to Nevins.
Nevins Co.Attn : COM/COL Approval Dept
Standard COL Square Footage The yardage requirements listed herein are for one unit and are based on 54" wide non‐directional fabrics. Generally, additional yardage is required if fabric is striped, patterned, requires matching, or if width of material is less than 54" wide. Please use the additional yardage guideline chart below to determine COM yardage requirements. Add the percentage shown on the chart to the standard yardage requirement. The below chart must be considered as an estimate only. Nevins is not responsible for overages or if additional yardage is required. Please contact Nevins Customer Service Department for assistance in determining yardage.
b.3 Include the following tagging on all cartons and paperwork :
c.1) Please allow 5 business days (from sample receipt by Nevins) fortesting and notification of written approval by Nevins.
Single Tier SeatingCMB1A Single InCMB1B Single Out e.1) Upon receipt of a COM/COL order and fabric approval, Nevins will
Double Tier Seating provide a COM/COL Shipping Instructions Form. This form will provide CMB2A Double In the COM/COL tagging information, yardage requirements and the CMB2B Double Out manufacturing address to which the COM/COL is to be shipped.
e.2) Once the required COM yardage/COL square footage has been shipped to the Nevins manufacturing facility, the customer is required to complete the Tracking Information section of the COM/COL Shipping Instruction Form and return it to Nevins COM (Order Entry) Department.
e.3) Once the required COM yardage/COL square footage has been received, inspected and approved, a ship date will be assigned and an order
Single Tier Seating acknowledgement will be issued.CMB1A Single InCMB1B Single Out
• Any special instructions regarding the application of the fabric must be indicated on the customer's order. In the absence of instructions, Nevins will apply the fabric at our own discretion, without liability.
e) COM/COL Shipping Instructions
(Must be Requested) (Standard)
Single Fabric Applications
(pair)2
2.5 2 1
• Fabric Make
COL Square Footage RequirementsCOL square footage requirements are determined by the leather hide finish and size. All leather(s) must be approved by Nevins. Upon approval, Nevins will advise square footage requirements.
Excess COM/COLNevins is not responsible for COM/COL overages. Unless specifically stated on the order, excess COM/COL will not be stored or returned.
COM / COL Information (continued)Standard COM Yardage
• Fabric Style/Pattern• Fabric Color • Fabric Number
14006 Newberg RoadCat Spring, TX 78933
Customer NameProject NamePO Number
Nevins Sales Order Number
c) Await notification of fabric approval and yardage requirements from Nevins.
d) Purchase Order Requirements (must be indicated on order) :
Contrasting Fabric Applications
Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c). Increased yardage may be required. Contact Nevins Customer Service Department.
COM Yards
Seat Side Panels Back
2.5 1
Single Fabric Applications
5.55.5
5.55.5
Seat/Side Panels/BackSingle Fabric Applications
COM Yards
CMB1B Single OutDouble Tier SeatingCMB2A Double InCMB2B Double Out
2.5 2 1
2.5 2 1
2.5 2 1
5 MATERIALS and FINISHES
Graded‐In Fabric Designs from CF Stinson
Grade 2 Grade 8 A IBryant Park Duet Ace 3 Inside Track 4
Haven Apex‐Crypton® Revl™ 6 Interval 7Squire Arioso 9
Grade 3 SummitAce MCarlisle B Manchester 7Tribeca Grade 9 Bali 11 Montage 7
Arioso Bespole 7Bryant Park 2
Grade 4 PFurrows Grade 10 Posh 7Inside Track Tweed C
Carlisle 3Cielo 15 R
G d 5 d
GRADED‐IN UPHOLSTERY FABRIC LISTING BY GRADE and ALPHABETICALLY
CliMb CollectionMulti‐Level Seating
Nevins offers our upholstered benches with select patterns of graded‐in CF Stinson upholstery. All fabric patterns are subject to the availability of the fabric from CF Stinson. CF Stinson reserves the right to discontinue any pattern or color from their libraries. For all patterns not listed, please contact Nevins Customer Service Department. To view patterns and colorways or to order memo samples, please refer to www.cfstinson.com
Listed AlphabeticallyListed by Grade
Grade 5 Grade 11 Clean Slate 5 Realm 7Clean Slate Bali Respite 12Sentry ‐ HC
DGrade 12 Duet 8 S
Grade 6 Respite Sentry ‐ HC 5Apex‐Crypton® Revl™ Squire 8
F Summit 8Grade 13 Furrows 4 Sundance w/ StaKleen™ 7
Grade 7 HudsonBespokeGravity G TInterval Grade 15 Gravity 7 Tribeca 3Manchester Cielo Tweed 10MontagePosh HRealm Haven 8Sundance w/ StaKleen™ Hudson 13
* * * Grades are subject to change, without notice. The fabric grade listings within this price guide are the most up‐to‐date listings available at the time of print. Please refer to www.nevins.co for the most current up‐to‐date fabric grade listings. * * *
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co CLIMB MULTI‐LEVEL SEATING 6
1. Fax completed form to 713‐230‐2150
2. Attach (2) 4" x 4" swatches of the fabric(s) to be tested to this form.
3. Submit completed form and swatches, prepaid to : Nevins Co.Attn : COM/COL Approval Department14006 Newberg RoadCat Spring, TX 78933
4. Include the following tagging on all cartons and paperwork : Customer NameProject NamePO NumberNevins Sales Order Number
5. For contrasting fabrics, please include (attached to this form) a completed Contrasting Fabric Sketch Form. One completed form per each model ordered is required.
6. Please allow 5 business days (from sample receipt by Nevins) for testing and notification of written approval by Nevins.
Single Fabric Applications
CliMb CollectionMulti‐Level Seating
Project Name : __________________________________________________________ PO Number : ____________________________________________________________
Nevins Sales Rep : ________________________________________________________ Nevins Sales Order Number : ______________________________________________
FABRIC / PRODUCT INFORMATION
COM or COL Manufacturer
Phone : ________________________________________________________________ Fax : ___________________________________________________________________
DEALER / PROJECT INFORMATION
Name : ________________________________________________________________ Contact : _______________________________________________________________
Address : _______________________________________________________________ City, State, Zip : __________________________________________________________
Fabric Approval Form
INSTRUCTIONS
Pattern Repeat (in inches) : None _______________ Vertical Repeat _______________ Horizontal Repeat _______________
Is Fabric Reversible (check one) ? no ____________ yes ____________ (swatch must be marked to indicate face side)
Is Fabric Stripped (check one) ? no ____________ yes ____________ Direction of stripe (check one) : vertical _____________ horizontal _____________
Nevins Use Only
Sample Receipt Date : ________________________________________________ Fabric Authorization : Approved _______________ Not Approved ______________
Single Fabric COM Yardage Requirement (per specified orientation) : ______________________
Contrasting COM Yardage Requirement (per specified orientation) : Seat (a) _____________ Side Panels (b) _____________ Back (c) _____________
QtyProduct
Model No.Product Description
Fabric Orientation Single Fabric Applications
Fabric Orientation Contrasting Fabric Applications
Railroad (default orientation if not specified)
Right‐Way (Up‐the‐Roll)
COM or COL Manufacturer : ___________________________________________________________________________________________________________________________________
Pattern Name / Color / Number : ______________________________________________________________________________________________________________________________
Complete and attach Contrasting Fabric Sketch
Form for each model ordered.
Signature : ______________________________________________________________ Date : ______________________________________________________________
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co
CliMb CollectionContrasting Fabric Sketch Form
PRODUCT MODEL No. : _____________________________ (one form per each model ordered is required)
Standard
CliMb CollectionMulti‐Level Seating
Project Name : ___________________________________________________________ PO Number : ________________________________________________________
Nevins Sales Rep : _________________________________________________________ Nevins Sales Order Number : _________________________________________
Component Diagram
INSTRUCTIONS1. Attach completed Contrasting Fabric Sketch form (one form per each model ordered) to Fabric Approval form. See Fabric Approval form for submittal instructions.
Right‐Way (Up‐the‐Roll)
Orientation Diagrams
Must be Requested
DEALER / PROJECT INFORMATION
Name : _________________________________________________________________ Contact : ___________________________________________________________
Address : ________________________________________________________________ City, State, Zip : ______________________________________________________
Phone : _________________________________________________________________ Fax : ________________________________________________________________
Railroad
COM or COL Manufacturer : _____________________________________________________________________________________________________________________________________
Pattern Name / Color / Number : ________________________________________________________________________________________________________________________________
Pattern Repeat (in inches) : None __________ Vertical Repeat __________ Horizontal Repeat __________
Is Fabric Reversible (check one) ? no _______ yes _______ (swatch must be marked to indicate face side)
Is Fabric Stripped (check one) ? no _______ yes _______ Direction of stripe (check one) : vertical ________ horizontal ________
Fabric Orientation (check one) : Railroad (default if not specified) ________ Right‐Way (Up‐the‐Roll) ________
COM or COL Manufacturer : _____________________________________________________________________________________________________________________________________
Pattern Name / Color / Number : ________________________________________________________________________________________________________________________________
Pattern Repeat (in inches) : None __________ Vertical Repeat __________ Horizontal Repeat __________
Is Fabric Reversible (check one) ? no _______ yes _______ (swatch must be marked to indicate face side)
Is Fabric Stripped (check one) ? no _______ yes _______ Direction of stripe (check one) : vertical ________ horizontal ________
Fabric Orientation (check one) : Railroad (default if not specified) ________ Right‐Way (Up‐the‐Roll) ________
COM or COL Manufacturer : _____________________________________________________________________________________________________________________________________
Pattern Name / Color / Number : ________________________________________________________________________________________________________________________________
Pattern Repeat (in inches) : None __________ Vertical Repeat __________ Horizontal Repeat __________
Is Fabric Reversible (check one) ? no _______ yes _______ (swatch must be marked to indicate face side)
Is Fabric Stripped (check one) ? no yes Direction of stripe (check one) : vertical horizontal
BACK (c) FABRIC INFORMATION
SEAT (a) FABRIC INFORMATION
SIDE PANELS (b) FABRIC INFORMATION
Is Fabric Stripped (check one) ? no _______ yes _______ Direction of stripe (check one) : vertical ________ horizontal ________
Fabric Orientation (check one) : Railroad (default if not specified) ________ Right‐Way (Up‐the‐Roll) ________
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co
• All configuration illustrations shown herein are priced with COM fabric.
COMDescription Qty List $Single In 2 4672Single Out 2 4672
9344
COMDescription Qty List $Single In 2 4672Single Out 2 4672Double In 2 5000Double Out 2 5000
19344
COMDescription Qty List $Single In 1 2336Single Out 1 2336Double In 1 2500
CliMb CollectionMulti‐Level Seating
Configurations
CMB‐CONFIG‐A
ModelCMB1ACMB1B
CMB‐CONFIG‐B
ModelCMB1ACMB1BCMB2ACMB2B
CMB‐CONFIG‐C
ModelCMB1ACMB1BCMB2A
Double Out 1 25009672
COMDescription Qty List $Double In 3 7500Double Out 3 7500
15000
COMDescription Qty List $Single In 2 4672Double In 4 10000
14672
COMDescription Qty List $Single In 3 7008Double In 5 12500
19508
S2‐CONFIG‐D
CMB2B
ModelCMB2ACMB2B
CMB1ACMB2A
CMB‐CONFIG‐E
Model
CMB‐CONFIG‐F
ModelCMB1ACMB2A
9 CONFIGURATIONS
• All configuration illustrations shown herein are priced with COM fabric.
COMDescription Qty List $Double In 6 15000
15000
COMDescription Qty List $Single In 2 4672Double In 5 12500Single Out 1 2336Double Out 5 12500
32008
COMDescription Qty List $Double In 6 15000
15000
CliMb CollectionMulti‐Level Seating
Configurations
CMB‐CONFIG‐G
ModelCMB2A
CMB‐CONFIG‐H
ModelCMB1ACMB2ACMB1BCMB2B
CMB‐CONFIG‐I
ModelCMB2A
COMDescription Qty List $Single In 3 7008Double In 6 15000
22008
COMDescription Qty List $Single In 3 7008
7008
COMDescription Qty List $Double In 4 10000
10000
CMB‐CONFIG‐J
ModelCMB1ACMB2A
CMB1A
CMB‐CONFIG‐K
Model
CMB‐CONFIG‐L
ModelCMB2A
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co CLIMB MULTI‐LEVEL SEATING 10
ModelUnit Style
DimensionsOverallTier Height
CliMb CollectionMulti‐Level Seating
Overview
Single Tier Seating
Single In Single OutCMB1A CMB1B
30"/52"W x 41.5"D x 34"H 52" 30"W x 41.5"D x 34"Hsingle tier; inwards taper single tier; outwards taper
Bottom 17" / Top 17" Bottom 17" / Top 17"
ModelUnit Style
DimensionsOverallTier Height
Double Tier Seating
Double In Double Out
two tiers; inwards taper two tiers; outwards taper30"/52"W x 41.5"D x 34"H 52" 30"W x 41.5"D x 34"H
CMB2A CMB2B
Bottom 9.5" / Middle 16" / Top 8.5" Bottom 9.5" / Middle 16" / Top 8.5"
11 OVERVIEW
Model COV1U COV2 COV3U COV4
Overview (continued)
Power Options
5"L x 2.5"D 5"L x 2.5"D 7.75"L x 2.5"D 7.75"L x 2.5"D(1) Electrical Outlet (12A,120VAC) (2) Electrical Outlets (12A,120VAC) (3) Electrical Outlets (12A,120VAC) (4) Electrical Outlets (12A,120VAC)
Cove Cove Cove Cove(Power/USB) (Power Only) (Power/USB) (Power Only)
Silver, Black or White Gloss Finish ETL Listed Silver, Black or White Gloss Finish ETL ListedETL Listed ETL Listed
(2) Charging USB (2.1A/11W, 5V/DC) (1) 108" Electrical Cord 15 AMP (2) Charging USB (2.1A/11W, 5V/DC) (1) 108" Electrical Cord 15 AMP(1) 108" Electrical Cord 15 AMP Silver, Black or White Gloss Finish (1) 108" Electrical Cord 15 AMP Silver, Black or White Gloss Finish
Note: Alternate power/USB/data configurations are available. Please contact Nevins Customer Service Department.
Multi‐Level SeatingCliMb Collection
Standard Power Placement
• Placement is allowed on the top tier (centered, 4 3/4" in from the back of the tier) or on the front face (centered, 4 3/4" up from the bottom) of the bottom tier. Please indicate placement code; see illustration below.
Power Unit Placement Code TBTTop of Top Tier Face of Bottom Tier Top of Top Tier and Face of Bottom Tier
Contrasting Fabric• Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c). Increased yardage may be required. An upcharge of $100 list per fabric contrasting applies. Contact Nevins Customer Service Department.
TT BT
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co CLIMB MULTI‐LEVEL SEATING 12
CliMb Collection
Lbs (approx.)
CMB1A 30"/52" x 41.5" x 34" 94 5.5 2336 2794 2853 2907 3000 3080 3188 3306 3377 3496 3580 3741 3882 4472
CMB1B 52"/30" x 41.5" x 34" 94 5.5 2336 2794 2853 2907 3000 3080 3188 3306 3377 3496 3580 3741 3882 4472
CMB2A 30"/52" x 41.5" x 34" 95 5.5 2500 2955 3015 3068 3162 3242 3350 3468 3539 3657 3742 3903 4043 4633
Multi‐Level Seating
COMGraded‐In CF Stinson Textiles
2 3 4 5 6 7 8 9 10 11 12 13 15Model Dimensions Weight
COM Yardage Requirements
Single Tier Seating(single fabric applications)
Single In
W x D x H yards List $ per unit
Inwards Taper
Single Out
Double Tier Seating
Outwards Taper
Double In
CMB2B 52"/30" x 41.5" x 34" 95 5.5 2500 2955 3015 3068 3162 3242 3350 3468 3539 3657 3742 3903 4043 4633
Key Features Optional Power Units List $
Cove Power OnlyCOV2 (2 Pwr) 292 eachCOV4 (4 Pwr) 479 each
Power / Charging USBCOV1U (1 Pwr / 2 USB) 396 each
• Each unit has 500 lb. weight capacity. COV3U (3 Pwr / 2 USB) 520 each
Contrasting Fabric
Yardage Requirements by Component Yards Optional Non‐Skid Glides List $Seat 2.5 Non‐Skid Rubber Glides (set of 5)Side Panels (pair) 2Back 1
List $
Double OutOutwards Taper
Inwards Taper
Option Code *• Four unit styles available. Silver Black White Gloss
COV4S COV4B COV4WCOV2S COV2B COV2W
COV1US COV1UB COV1UW• Nylon adjustable glides are standard. Non‐skid rubber glides are available by request: option code NSG.
• 27 Graded‐In CF Stinson fabrics are available. All COM fabrics require pre‐approval. • Contrasting fabric option available.• 7 Cove power units are available; installation allowed in the top tier or face of the bottom tier.
Option Code
* Please indicate power placement code. See How to Specify, page 14
COV3US COV3UB COV3UW
• Contrasting fabrics may be specified for the seat (a), side panels (b) or back (c) All COM fabrics require pre‐approval.
NSG no charge
Option Code
List $Contrasting Fabric 55CF‐CMB per additional fabric /
per unit
Option Code
13 PRICING
Model
Single In CMB1A Graded‐In CF Stinson Fabric GICustomer's Own Material COM
Cove Power Only
COV2 (2 Pwr)COV4 (4 Pwr)
Power / Charging USBSingle Out CMB1B COV1U (1 Pwr / 2 USB) SEAT/SIDE PANELS/BACK Fabric
COV3U (3 Pwr / 2 USB) 3b) Specify Fabric Information3b.1) Fabric Make3b.2) Fabric Style/Pattern3b.3) Fabric Color 3b.4) Fabric Number
Top Tier Placement
Model Bottom Tier Placement
Double In CMB2A Top and Bottom Tier Placement
SEAT Fabric3b.1) Specify Fabric Information
CliMb CollectionMulti‐Level Seating
How To Specify
1) Specify Model Number / 2) Specify Options (optional) / 3) Specify Fabric
3a. Specify Fabric Source Code
2a.1 Specify Power Unit
Single Tier Seating Power Unit Options Option Code *
Silver Black White Gloss
3b. Specify Fabric Information COV2S COV2B COV2WCOV4S
COV3US COV3UB COV3UW
COV4B COV4W
Single Fabric Applications *
COV1US COV1UB COV1UW
* All COM fabrics require pre‐approval. A COM Approval Form must be completed and submitted with order.
Double Tier Seating
2a.2 Specify Power Placement
Contrasting Fabric Applications **
TT
BT
TBT
3b.1a) Fabric Make3b.1b) Fabric Style/Pattern3b.1c) Fabric Color 3b.1d) Fabric Number
Double Out CMB2B SIDE PANELS Fabric3b.2) Specify Fabric Information for SIDE PANELS
3b.2a) Fabric Make3b.2b) Fabric Style/Pattern3b.2c) Fabric Color 3b.2d) Fabric Number
BACK Fabric 3b.3) Specify Fabric Information for BACK
3b.3a) Fabric Make3b.3b) Fabric Style/Pattern3b.3c) Fabric Color 3b.3d) Fabric Number
Non‐Skid Glide OptionOption Code
2b. Specify Non‐Skid Glides (set of 5) NSG
* * All COM fabrics require pre‐approval. A COM Approval Form must be completed and submitted with order.
COV2S ‐ BT Cove unit, Silver finish; placement in the bottom tier. / NSG Non‐Skid Glides
GI Graded in CF Stinson Fabric : Seat/Back is Ace 6548 Midnight; Side Panels are Ace 6540 Char
COV2S ‐ BT / NSG / GI ‐ CF Stinson Ace 6548 Midnight (SEAT/BACK); CF Stinson Ace 6540 Char (SIDE PANELS)
CM1BA Single In unit
Example Model Number
CMB1A /
www.nevins.co ∙ 800‐231‐2744 ∙ customerservice@nevins.co CLIMB MULTI‐LEVEL SEATING 14
top related