温家宝2307电源开关更换 - ifixit-guide-pdfs.s3 ... · 温家宝2307电源开关更换...

Wen 2307 Power Switch ReplacementThis guide is here to help the user replace the power switch on their Wen 2307 rotary tool.

撰写者: Joshua Bowery

Wen 2307 Power Switch Replacement 草案： 2016-05-23指南 ID： 56698 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 1 / 6 页

介介绍绍

One possible reason for your device not powering on is a damaged power switch. Use this guide toreplace it.

工具工具:Phillips #2 Screwdriver (1)

Wen 2307 Power Switch Replacement 草案： 2016-05-23指南 ID： 56698 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 2 / 6 页

步骤步骤 1 — Front Panel

Unscrew the locking sleeve.

步骤步骤 2

Remove the hanging clip.

Wen 2307 Power Switch Replacement 草案： 2016-05-23指南 ID： 56698 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 3 / 6 页

步骤步骤 3

Unscrew the six 8mm PH2 screws.

步骤步骤 4

While pressing the spindle lockbutton, unscrew the collet nut andremove it along with the brass collet.

Wen 2307 Power Switch Replacement 草案： 2016-05-23指南 ID： 56698 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 4 / 6 页

步骤步骤 5

To remove the front panel, pry thedevice apart while holding the devicewith the other hand.

The front panel should come outeasily.

步骤步骤 6 — Power Switch

Firmly grasp and lift out powerswitch.

Wen 2307 Power Switch Replacement 草案： 2016-05-23指南 ID： 56698 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 5 / 6 页

To reassemble your device, follow these instructions in reverse order.

步骤步骤 7

Firmly grasp and disconnect cables.

Make sure to mark your cablepositions so you do not reversethem when putting back together.

Wen 2307 Power Switch Replacement 草案： 2016-05-23指南 ID： 56698 -

æ ¤æ–‡æ¡£ç”Ÿæˆ äºŽ 2019-12-16 03:48:50 AM (MST)。

© iFixit — CC BY-NC-SA zh.iFixit.com 6 / 6 页