7$5,) '(6 '28$1(6 $11(;( l &kdslwuh )217 ... - cbsa-asfc.gc.ca · 7$5,) '(6...
Post on 05-Aug-2020
1 Views
Preview:
TRANSCRIPT
TARIF DES DOUANES - ANNEXE
72 - i
Émis 1 janvier 2020
Chapitre 72
FONTE, FER ET ACIER
Notes. 1. Dans ce Chapitre et, pour ce qui est des lettres d), e) et f) de la présente Note, dans la Nomenclature, on considère comme :
a) Fontes brutes
les alliages fer-carbone ne se prêtant pratiquement pas à la déformation plastique, contenant en poids plus de 2 % de carbone et pouvant contenir en poids un ou plusieurs autres éléments dans les proportions suivantes :
- 10 % ou moins de chrome - 6 % ou moins de manganèse - 3 % ou moins de phosphore - 8 % ou moins de silicium - 10 % ou moins, au total, d'autres éléments.
b) Fontes spiegel
les alliages fer-carbone contenant en poids plus de 6 % mais pas plus de 30 % de manganèse et répondant, en ce qui concerne les autres caractéristiques, à la définition de la Note 1 a).
c) Ferro-alliages
les alliages sous formes de gueuses, saumons, masses ou formes primaires similaires, sous formes obtenues par le procédé de la coulée continue ou en grenailles ou en poudre, même agglomérés, communément utilisés soit comme produits d'apport dans la préparation d'autres alliages, soit comme désoxydants, désulfurants ou à des usages similaires dans la sidérurgie et ne se prêtant généralement pas à la déformation plastique, contenant en poids 4 % ou plus de fer et un ou plusieurs éléments dans les proportions suivantes :
- plus de 10 % de chrome - plus de 30 % de manganèse - plus de 3 % de phosphore - plus de 8 % de silicium - plus de 10 % au total d'autres éléments, à l'exclusion du carbone, le pourcentage de cuivre ne pouvant toutefois
excéder 10 %.
d) Aciers
les matières ferreuses autres que celles du no 72.03 qui, à l'exception de certains types d'aciers produits sous forme de pièces moulées, se prêtent à la déformation plastique et contiennent en poids 2 % ou moins de carbone. Toutefois, les aciers au chrome peuvent présenter une teneur en carbone plus élevée.
e) Aciers inoxydables
les aciers alliés contenant en poids 1,2 % ou moins de carbone et 10,5 % ou plus de chrome, avec ou sans autres éléments.
f) Autres aciers alliés
les aciers ne répondant pas à la définition des aciers inoxydables et contenant en poids un ou plusieurs des éléments ci-après dans les proportions suivantes : - 0,3 % ou plus d'aluminium - 0,0008 % ou plus de bore
- 0,3 % ou plus de chrome - 0,3 % ou plus de cobalt
TARIF DES DOUANES - ANNEXE
72 - ii
Émis 1 janvier 2020
- 0,4 % ou plus de cuivre - 0,4 % ou plus de plomb - 1,65 % ou plus de manganèse - 0,08 % ou plus de molybdène - 0,3 % ou plus de nickel - 0,06 % ou plus de niobium - 0,6 % ou plus de silicium - 0,05 % ou plus de titane - 0,3 % ou plus de tungstène (wolfram) - 0,1 % ou plus de vanadium - 0,05 % ou plus de zirconium - 0,1 % ou plus d'autres éléments (sauf le soufre, le phosphore, le carbone et l'azote) pris individuellement.
g) Déchets lingotés en fer ou en acier
les produits grossièrement coulés sous forme de lingots sans masselottes ou de saumons, présentant de profonds défauts de surface et ne répondant pas, en ce qui concerne leur composition chimique, aux définitions des fontes brutes, des fontes spiegel ou des ferro-alliages.
h) Grenailles
les produits qui passent à travers un tamis d'une ouverture de maille de 1 mm dans une proportion inférieure à 90 % en poids et à travers un tamis d'une ouverture de maille de 5 mm dans une proportion égale ou supérieure à 90 % en poids.
ij) Demi-produits
les produits de section pleine obtenus par coulée continue, même ayant subi un laminage à chaud grossier; et les autres produits de section pleine ayant simplement subi un laminage à chaud grossier ou simplement dégrossis par forgeage ou par martelage, y compris les ébauches pour profilés.
Ces produits ne sont pas présentés enroulés.
k) Produits laminés plats
les produits laminés de section transversale pleine rectangulaire ne répondant pas à la définition précisée à la Note ij) ci-dessus, - enroulés en spires superposées, ou - non enroulés, d'une largeur au moins égale à dix fois l'épaisseur si celle-ci est inférieure à 4,75 mm ou d'une largeur
excédant 150 mm si l'épaisseur est de 4,75 mm ou plus sans toutefois excéder la moitié de la largeur. Restent classés comme produits laminés plats les produits de l'espèce présentant des motifs en relief provenant directement du laminage (cannelures, stries, gaufrages, larmes, boutons, rhombes, par exemple) ainsi que ceux perforés, ondulés, polis, pourvu que ces ouvraisons n'aient pas pour effet de leur conférer le caractère d'articles ou d'ouvrages repris ailleurs. Les produits laminés plats de forme autre que carrée ou rectangulaire et de toute dimension sont à classer comme produits d'une largeur de 600 mm ou plus pourvu qu'ils n'aient pas le caractère d'articles ou d'ouvrages repris ailleurs.
l) Fil machine
les produits laminés à chaud, enroulés en spires non rangées (en couronnes), dont la section transversale pleine est en forme de cercle, de segment circulaire, d'ovale, de carré, de rectangle, de triangle ou autre polygone convexe (y compris les cercles aplatis et les rectangles modifiés, dont deux côtés opposés sont en forme d'arcs de cercle convexe, les deux autres étant rectilignes, égaux et parallèles). Ces produits peuvent comporter des indentations, bourrelets, creux ou reliefs obtenus au cours du laminage (aciers d'armature pour béton).
TARIF DES DOUANES - ANNEXE
72 - iii
Émis 1 janvier 2020
m) Barres
les produits ne répondant pas à l'une quelconque des définitions précisées aux lettres ij), k) ou l) ci-dessus ni à la définition des fils et dont la section transversale pleine et constante est en forme de cercle, de segment circulaire, d'ovale, de carré, de rectangle, de triangle ou autre polygone convexe (y compris les cercles aplatis et les rectangles modifiés, dont deux côtés opposés sont en forme d'arcs de cercle convexe, les deux autres étant rectilignes, égaux et parallèles). Ces produits peuvent :
- comporter des indentations, bourrelets, creux ou reliefs obtenus au cours du laminage (barres d'armature pour béton); - avoir subi une torsion après laminage.
n) Profilés
les produits d'une section transversale pleine et constante, ne répondant pas à l'une quelconque des définitions précisées aux lettres ij), k), l) ou m) ci-dessus ni à la définition des fils. Le Chapitre 72 ne comprend pas les produits des nos 73.01 ou 73.02.
o) Fils
les produits obtenus à froid, enroulés, ayant une section transversale de forme quelconque pleine et constante et ne répondant pas à la définition des produits laminés plats.
p) Barres creuses pour le forage
les barres à section de forme quelconque, propres à la fabrication des fleurets, et dont la plus grande dimension extérieure de la coupe transversale, excédant 15 mm mais n'excédant pas 52 mm, est au moins le double de la plus grande dimension intérieure (creux). Les barres creuses en fer ou en acier ne répondant pas à cette définition relèvent du no 73.04.
2. Les métaux ferreux plaqués d'un métal ferreux de qualité différente suivent le régime du métal ferreux prédominant en poids. 3. Les produits en fer ou en acier obtenus par électrolyse, par coulée sous pression ou par frittage sont classés selon leur
forme, leur composition et leur aspect dans les positions afférentes aux produits analogues laminés à chaud.
Notes de sous-positions. 1. Dans ce Chapitre, on entend par :
a) Fontes brutes alliées
les fontes brutes contenant un ou plusieurs des éléments suivants dans les proportions en poids ci-indiquées :
- plus de 0,2 % de chrome - plus de 0,3 % de cuivre - plus de 0,3 % de nickel - plus de 0,1 % de n'importe lequel des éléments suivants : aluminium, molybdène, titane, tungstène (wolfram),
vanadium.
b) Aciers non alliés de décolletage
les aciers non alliés contenant un ou plusieurs des éléments suivants dans les proportions en poids ci-indiquées : - 0,08 % ou plus de soufre - 0,1 % ou plus de plomb - plus de 0,05 % de sélénium - plus de 0,01 % de tellure - plus de 0,05 % de bismuth.
TARIF DES DOUANES - ANNEXE
72 - iv
Émis 1 janvier 2020
c) Aciers au silicium dits « magnétiques »
les aciers contenant en poids au moins 0,6 % mais pas plus de 6 % de silicium et pas plus de 0,08 % de carbone, et pouvant contenir en poids 1 % ou moins d'aluminium, à l'exclusion de tout autre élément dans une proportion ayant pour effet de leur conférer le caractère d'autres aciers alliés.
d) Aciers à coupe rapide
les aciers alliés contenant, avec ou sans autres éléments, au moins deux des trois éléments suivants : molybdène, tungstène et vanadium avec une teneur totale en poids égale ou supérieure à 7 % pour ces éléments considérés ensemble, et contenant 0,6 % ou plus de carbone et de 3 à 6 % de chrome.
e) Aciers silico-manganeux
les aciers contenant en poids : - pas plus de 0,7 % de carbone, - 0,5 % ou plus mais pas plus de 1,9 % de manganèse, et - 0,6 % ou plus mais pas plus de 2,3 % de silicium, à l'exclusion de tout autre élément dans une proportion ayant pour
effet de leur conférer le caractère d'autres aciers alliés. 2. Le classement des ferro-alliages dans les sous-positions du no 72.02 obéit à la règle ci-après :
Un ferro-alliage est considéré comme binaire et classé dans la sous-position appropriée (si elle existe) lorsqu'un seul des éléments d'alliage présente une teneur excédant le pourcentage minimal stipulé dans la Note 1 c) du Chapitre. Par analogie, il est considéré respectivement comme ternaire ou quaternaire lorsque deux ou trois des éléments d'alliage ont des teneurs excédant les pourcentages minimaux indiqués dans ladite Note. Pour l'application de cette règle, les éléments non spécifiquement cités dans la Note 1 c) du Chapitre et couverts par les termes autres éléments doivent toutefois présenter chacun une teneur excédant 10 % en poids.
Note statistique. (N.B. Cette note ne fait pas partie de la législation du Tarif des douanes.) 1. Pour les besoins statistiques des nos de sous-positions 7222.11, 7222.19, 7222.20 et 7222.30, l'expression acier allié à teneur élevée de nickel est considérée comme étant de l'acier allié de nickel contenant en poids 3 % ou plus de nickel.
72 - 1
Issued July 1, 2020
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
I. -PRIMARY MATERIALS; PRODUCTS IN GRANULAR OR POWDER
FORM
72.01 Pig iron and spiegeleisen in pigs, blocks or other primary forms.
7201.10.00 00 -Non-alloy pig iron containing by weight 0.5% or less of phosphorus TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7201.20.00 00 -Non-alloy pig iron containing by weight more than 0.5% of phosphorus TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7201.50.00 00 -Alloy pig iron; spiegeleisen KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.02 Ferro-alloys.
-Ferro-manganese:
7202.11.00 00 - -Containing by weight more than 2% of carbon KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.19.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Ferro-silicon:
7202.21.00 00 - -Containing by weight more than 55% of silicon KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
Issued July 1, 2020
72 - 2
7202.29.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.30.00 00 -Ferro-silico-manganese KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Ferro-chromium:
7202.41.00 00 - -Containing by weight more than 4% of carbon
Note: The benefit of the Most-Favoured-Nation Tariff is extended to
goods of this tariff item that originate in a country to which the
General Tariff applies.
KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.49.00 00 - -Other
Note: The benefit of the Most-Favoured-Nation Tariff is extended to
goods of this traiff item that originate in a country to which the
General Tariff applies.
KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.50.00 00 -Ferro-silico-chromium KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.60.00 00 -Ferro-nickel KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.70.00 00 -Ferro-molybdenum KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.80.00 00 -Ferro-tungsten and ferro-silico-tungsten KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 3
Issued July 1, 2020
-Other:
7202.91.00 00 - -Ferro-titanium and ferro-silico-titanium KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.92.00 00 - -Ferro-vanadium KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.93.00 00 - -Ferro-niobium KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7202.99.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.03 Ferrous products obtained by direct reduction of iron ore and other
spongy ferrous products, in lumps, pellets or similar forms; iron having
a minimum purity by weight of 99.94%, in lumps, pellets or similar forms.
7203.10.00 00 -Ferrous products obtained by direct reduction of iron ore TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7203.90.00 00 -Other TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.04 Ferrous waste and scrap; remelting scrap ingots of iron or steel.
7204.10.00 00 -Waste and scrap of cast iron TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 4
-Waste and scrap of alloy steel:
7204.21.00 00 - -Of stainless steel TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7204.29.00 00 - -Other TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7204.30.00 00 -Waste and scrap of tinned iron or steel TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Other waste and scrap:
7204.41.00 - -Turnings, shavings, chips, milling waste, sawdust, filings, trimmings
and stampings, whether or not in bundles
Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -No.1 in bundles ...................................................................................... TNE
20 - - - - -Other turnings and shavings................................................................... TNE
90 - - - - -Other ...................................................................................................... TNE
7204.49.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -No. 1 heavy melting................................................................................ TNE
20 - - - - -No. 2 heavy melting................................................................................ TNE
- - - - -Other:
91 - - - - - -Shredded.............................................................................................. TNE
99 - - - - - -Other .................................................................................................... TNE
7204.50.00 00 -Remelting scrap ingots TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.05 Granules and powders, of pig iron, spiegeleisen, iron or steel.
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 5
Issued July 1, 2020
7205.10.00 00 -Granules TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Powders:
7205.21.00 00 - -Of alloy steel TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7205.29.00 00 - -Other TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
II. -IRON AND NON-ALLOY STEEL
72.06 Iron and non-alloy steel in ingots or other primary forms (excluding iron
of heading 72.03).
7206.10.00 00 -Ingots TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7206.90.00 00 -Other TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.07 Semi-finished products of iron or non-alloy steel.
-Containing by weight less than 0.25% of carbon:
7207.11.00 - -Of rectangular (including square) cross-section, the width measuring
less than twice the thickness
Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of iron .................................................................................................... TNE
- - - - -Of non-alloy steel:
21 - - - - - -Billets ................................................................................................... TNE
29 - - - - - -Other .................................................................................................... TNE
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 6
7207.12.00 00 - -Other, of rectangular (other than square) cross-section TNE Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7207.19.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Rounds ................................................................................................... TNE
90 - - - - -Other ...................................................................................................... TNE
7207.20.00 -Containing by weight 0.25% or more of carbon Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Blooms ................................................................................................... TNE
20 - - - - -Billets...................................................................................................... TNE
30 - - - - -Slabs, sheet bars or rounds.................................................................... TNE
90 - - - - -Other ...................................................................................................... TNE
72.08 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or
more, hot-rolled, not clad, plated or coated.
7208.10.00 00 -In coils, not further worked than hot-rolled, with patterns in relief KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Other, in coils, not further worked than hot-rolled, pickled:
7208.25.00 00 - -Of a thickness of 4.75 mm or more KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7208.26.00 00 - -Of a thickness of 3 mm or more but less than 4.75 mm KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 7
Issued July 1, 2020
7208.27.00 00 - -Of a thickness of less than 3 mm KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
-Other, in coils, not further worked than hot-rolled:
7208.36.00 00 - -Of a thickness exceeding 10 mm KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7208.37.00 - -Of a thickness of 4.75 mm or more but not exceeding 10 mm Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a width of 600 mm or more but not exceeding 1,525 mm ................. KGM
20 - - - - -Of a width exceeding 1,525 mm but not exceeding 1,830 mm .............. KGM
50 - - - - -Of a width exceeding 1,830 mm............................................................. KGM
7208.38.00 - -Of a thickness of 3 mm or more but less than 4.75 mm Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a width of 600 mm or more but not exceeding 1,525 mm ................. KGM
20 - - - - -Of a width exceeding 1,525 mm but not exceeding 1,830 mm .............. KGM
50 - - - - -Of a width exceeding 1,830 mm............................................................. KGM
7208.39.00 00 - -Of a thickness of less than 3 mm KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7208.40.00 00 -Not in coils, not further worked than hot-rolled, with patterns in relief KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
-Other, not in coils, not further worked than hot-rolled:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 8
7208.51.00 - -Of a thickness exceeding 10 mm Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Heat treated............................................................................................ KGM
- - - - -Other:
91 - - - - - -Of a width of 600 mm or more but not exceeding 1,525 mm ............... KGM
92 - - - - - -Of a width exceeding 1,525 mm but not exceeding 1,830 mm ............ KGM
93 - - - - - -Of a width exceeding 1,830 mm but not exceeding 2,450 mm ............ KGM
94 - - - - - -Of a width exceeding 2,450 mm but not exceeding 3,050 mm ............ KGM
95 - - - - - -Of a width exceeding 3,050 mm........................................................... KGM
7208.52.00 - -Of a thickness of 4.75 mm or more but not exceeding 10 mm Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Heat treated............................................................................................ KGM
- - - - -Other:
91 - - - - - -Of a width of 600 mm or more but not exceeding 1,525 mm ............... KGM
92 - - - - - -Of a width exceeding 1,525 mm but not exceeding 1,830 mm ............ KGM
93 - - - - - -Of a width exceeding 1,830 mm but not exceeding 2,450 mm ............ KGM
96 - - - - - -Of a width exceeding 2,450 mm........................................................... KGM
7208.53.00 00 - -Other, of a thickness of 3 mm or more but less than 4.75 mm KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7208.54.00 00 - -Other, of a thickness of less than 3 mm KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7208.90.00 00 -Other KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
72.09 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or
more, cold-rolled (cold-reduced), not clad, plated or coated.
-In coils, not further worked than cold-rolled (cold-reduced):
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 9
Issued July 1, 2020
7209.15.00 00 - -Of a thickness of 3 mm or more KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7209.16.00 00 - -Of a thickness exceeding 1 mm but less than 3 mm KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7209.17.00 00 - -Of a thickness of 0.5 mm or more but not exceeding 1 mm KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7209.18.00 00 - -Of a thickness of less than 0.5 mm KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
-Not in coils, not further worked than cold-rolled (cold-reduced):
7209.25.00 00 - -Of a thickness of 3 mm or more KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7209.26.00 00 - -Of a thickness exceeding 1 mm but less than 3 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7209.27.00 00 - -Of a thickness of 0.5 mm or more but not exceeding 1 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7209.28.00 00 - -Of a thickness of less than 0.5 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 10
7209.90.00 00 -Other KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
72.10 Flat-rolled products of iron or non-alloy steel, of a width of 600 mm or
more, clad, plated or coated.
-Plated or coated with tin:
7210.11.00 00 - -Of a thickness of 0.5 mm or more KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7210.12.00 00 - -Of a thickness of less than 0.5 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7210.20.00 00 -Plated or coated with lead, including terne-plate KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7210.30.00 00 -Electrolytically plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Otherwise plated or coated with zinc:
7210.41.00 00 - -Corrugated KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7210.49.00 - -Other Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a thickness not exceeding 0.5 mm .................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 11
Issued July 1, 2020
20 - - - - -Of a thickness exceeding 0.5 mm but not exceeding 1 mm................... KGM
30 - - - - -Of a thickness exceeding 1 mm ............................................................. KGM
7210.50.00 00 -Plated or coated with chromium oxides or with chromium and
chromium oxides
KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Plated or coated with aluminum:
7210.61.00 00 - -Plated or coated with aluminium-zinc alloys KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7210.69.00 - -Other Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Of a thickness of less than 1.44 mm ...................................................... KGM
20 - - - - -Of a thickness of 1.44 mm or more ........................................................ KGM
7210.70.00 00 -Painted, varnished or coated with plastics KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7210.90.00 00 -Other KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.11 Flat-rolled products of iron or non-alloy steel, of a width of less than
600 mm, not clad, plated or coated.
-Not further worked than hot-rolled:
7211.13.00 00 - -Rolled on four faces or in a closed box pass, of a width exceeding
150 mm and a thickness of not less than 4 mm, not in coils and
without patterns in relief
KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 12
7211.14.00 - -Other, of a thickness of 4.75 mm or more Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Not in coils .............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7211.19.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Not in coils .............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
-Not further worked than cold-rolled (cold-reduced):
7211.23.00 00 - -Containing by weight less than 0.25% of carbon KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7211.29.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7211.90.00 00 -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.12 Flat-rolled products of iron or non-alloy steel, of a width of less than
600 mm, clad, plated or coated.
7212.10.00 00 -Plated or coated with tin KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7212.20.00 00 -Electrolytically plated or coated with zinc KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 13
Issued July 1, 2020
7212.30.00 00 -Otherwise plated or coated with zinc KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7212.40.00 00 -Painted, varnished or coated with plastics KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7212.50.00 00 -Otherwise plated or coated KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7212.60.00 00 -Clad KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.13 Bars and rods, hot-rolled, in irregularly wound coils, of iron or non-alloy
steel.
7213.10.00 00 -Containing indentations, ribs, grooves or other deformations produced
during the rolling process
KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7213.20.00 -Other, of free-cutting steel Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Wire rods................................................................................................ KGM
20 - - - - -Rounds, of a diameter not exceeding 75 mm ........................................ KGM
30 - - - - -Hexagons ............................................................................................... KGM
40 - - - - -Squares.................................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
-Other:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 14
7213.91.00 - -Of circular cross-section measuring less than 14 mm in diameter Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Containing by weight less than 0.25% of carbon:
11 - - - - - -Wire rods .............................................................................................. KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Containing by weight 0.25% or more but less than 0.6% of carbon:
21 - - - - - -Wire rods .............................................................................................. KGM
29 - - - - - -Other .................................................................................................... KGM
- - - - -Containing by weight 0.6% or more of carbon:
31 - - - - - -Wire rods .............................................................................................. KGM
39 - - - - - -Other .................................................................................................... KGM
7213.99.00 - -Other Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Wire rods, containing by weight less than 0.25% of carbon ................... KGM
- - - - -Other, containing by weight less than 0.25% of carbon:
21 - - - - - -Rounds, of a diameter of 14 mm or more but not exceeding 35 mm ... KGM
22 - - - - - -Rounds, of a diameter exceeding 35 mm............................................. KGM
23 - - - - - -Hexagons ............................................................................................. KGM
24 - - - - - -Squares ................................................................................................ KGM
29 - - - - - -Other .................................................................................................... KGM
30 - - - - -Wire rods, containing by weight 0.25% or more but less than 0.6% of
carbon .................................................................................................... KGM
- - - - -Other, containing by weight 0.25% or more but less than 0.6% of
carbon:
41 - - - - - -Rounds, of a diameter of 14 mm or more but not exceeding 35 mm ... KGM
42 - - - - - -Rounds, of a diameter exceeding 35 mm............................................. KGM
49 - - - - - -Other .................................................................................................... KGM
50 - - - - -Wire rods, containing by weight 0.6% or more of carbon ....................... KGM
- - - - -Other, containing by weight 0.6% or more of carbon:
91 - - - - - -Rounds, of a diameter of 14 mm or more but not exceeding 35 mm ... KGM
92 - - - - - -Rounds, of a diameter exceeding 35 mm............................................. KGM
99 - - - - - -Other .................................................................................................... KGM
72.14 Other bars and rods of iron or non-alloy steel, not further worked than
forged, hot-rolled, hot-drawn or hot-extruded, but including those
twisted after rolling.
7214.10.00 00 -Forged KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 15
Issued July 1, 2020
7214.20.00 00 -Containing indentations, ribs, grooves or other deformations produced
during the rolling process or twisted after rolling
KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7214.30.00 -Other, of free-cutting steel Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Containing by weight 0.15% or more but not exceeding 0.35% of lead
or 0.05% or more but not exceeding 0.4% of bismuth, for use in
Canadian manufactures ......................................................................... KGM
- - - - -Flat bars, including flat grader blade sections:
21 - - - - - -Of a width not exceeding 75 mm ......................................................... KGM
22 - - - - - -Of a width exceeding 75 mm but less than 150 mm ............................ KGM
23 - - - - - -Of a width of 150 mm or more ............................................................. KGM
- - - - -Rounds:
31 - - - - - -Of a diameter not exceeding 75 mm.................................................... KGM
32 - - - - - -Of a diameter exceeding 75 mm.......................................................... KGM
40 - - - - -Hexagons ............................................................................................... KGM
50 - - - - -Squares.................................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
-Other:
7214.91.00 - -Of rectangular (other than square) cross-section Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a width not exceeding 75 mm............................................................ KGM
20 - - - - -Of a width exceeding 75 mm but less than 150 mm .............................. KGM
30 - - - - -Of a width of 150 mm or more................................................................ KGM
7214.99.00 - -Other Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Rounds:
11 - - - - - -Of a diameter not exceeding 75 mm.................................................... KGM
12 - - - - - -Of a diameter exceeding 75 mm.......................................................... KGM
20 - - - - -Hexagons ............................................................................................... KGM
30 - - - - -Squares.................................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
72.15 Other bars and rods of iron or non-alloy steel.
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 16
7215.10.00 -Of free-cutting steel, not further worked than cold-formed or cold-
finished
Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
20 - - - - -Rounds ................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7215.50.00 -Other, not further worked than cold-formed or cold-finished Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Flat bars ................................................................................................. KGM
- - - - -Rounds:
21 - - - - - -Ground, turned or polished................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7215.90.00 -Other Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Chrome plated ........................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
72.16 Angles, shapes and sections of iron or non-alloy steel.
7216.10.00 -U, I or H sections, not further worked than hot-rolled, hot-drawn or
extruded, of a height of less than 80 mm
Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -U sections:
11 - - - - - -American standard ............................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -I sections:
21 - - - - - -American standard ............................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
30 - - - - -H sections............................................................................................... KGM
-L or T sections, not further worked than hot-rolled, hot-drawn or
extruded, of a height of less than 80 mm:
7216.21.00 - -L sections Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Equal legs............................................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 17
Issued July 1, 2020
20 - - - - -Unequal legs .......................................................................................... KGM
7216.22.00 00 - -T sections KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-U, I or H sections, not further worked than hot-rolled, hot-drawn or
extruded, of a height of 80 mm or more:
7216.31.00 - -U sections Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Of a height of 80 mm or more but not exceeding 152.4 mm:
11 - - - - - -American standard............................................................................... KGM
12 - - - - - -For motor vehicles ............................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Of a height exceeding 152.4 mm:
21 - - - - - -American standard............................................................................... KGM
22 - - - - - -For motor vehicles ............................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
7216.32.00 - -I sections Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a height of 80 mm or more but not exceeding 152.4 mm.................. KGM
20 - - - - -Of a height exceeding 152.4 mm ........................................................... KGM
7216.33.00 - -H sections Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Wide flange:
11 - - - - - -Of a height not exceeding 150 mm ...................................................... KGM
12 - - - - - -Of a height exceeding 150 mm but not exceeding 355 mm................. KGM
13 - - - - - -Of a height exceeding 355 mm but not exceeding 635 mm................. KGM
14 - - - - - -Of a height exceeding 635 mm ............................................................ KGM
20 - - - - -Bearing pile ............................................................................................ KGM
- - - - -Other:
91 - - - - - -Of a height of 80 mm or more but not exceeding 152.4 mm................ KGM
92 - - - - - -Of a height exceeding 152.4 mm ......................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 18
7216.40.00 -L or T sections, not further worked than hot-rolled, hot-drawn or
extruded, of a height of 80 mm or more
Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -L sections, equal legs:
11 - - - - - -Of a height of 80 mm or more but not exceeding 152.4 mm................ KGM
12 - - - - - -Of a height exceeding 152.4 mm ......................................................... KGM
- - - - -L sections, unequal legs:
21 - - - - - -Large leg, of a height of 80 mm or more but not exceeding 152.4 mm KGM
22 - - - - - -Large leg, of a height exceeding 152.4 mm ......................................... KGM
30 - - - - -T sections ............................................................................................... KGM
7216.50.00 -Other angles, shapes and sections, not further worked than hot-rolled,
hot-drawn or extruded
Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -For use in ships, boats or floating structures.......................................... KGM
20 - - - - -Shapes or sections, with bevelled edge or edges, of a length of more
than 3.65 m and either of a width of more than 25.4 cm or of a thickness
of more than 3.5 cm, for use in the manufacture of cutting edges for
bulldozer or angledozer blades, front-end shovel loader buckets,
combination excavating and transporting scrapers, road graders or
road scrapers ......................................................................................... KGM
30 - - - - -Track shoe profile bars of steel, of a width of 190 mm or more but not
exceeding 350 mm and of a height not exceeding 150 mm, for use in
the manufacture of track shoes for track-laying machinery or vehicles.. KGM
90 - - - - -Other ...................................................................................................... KGM
-Angles, shapes and sections, not further worked than cold-formed or
cold-finished:
7216.61.00 00 - -Obtained from flat-rolled products KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7216.69.00 00 - -Other KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Other:
7216.91.00 - -Cold-formed or cold-finished from flat-rolled products Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 19
Issued July 1, 2020
10 - - - - -L sections ............................................................................................... KGM
20 - - - - -I or H sections ........................................................................................ KGM
30 - - - - -U sections .............................................................................................. KGM
- - - - -Other:
91 - - - - - -Ribbed shapes ..................................................................................... KGM
99 - - - - - -Other .................................................................................................... KGM
7216.99.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -L sections ............................................................................................... KGM
20 - - - - -I or H sections ........................................................................................ KGM
30 - - - - -U sections .............................................................................................. KGM
- - - - -Other:
91 - - - - - -Ribbed shapes ..................................................................................... KGM
99 - - - - - -Other .................................................................................................... KGM
72.17 Wire of iron or non-alloy steel.
7217.10.00 -Not plated or coated, whether or not polished Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Containing by weight less than 0.25% of carbon:
11 - - - - - -For the manufacture of nails ................................................................ KGM
12 - - - - - -For the manufacture of wire rope......................................................... KGM
13 - - - - - -For the manufacture of welding wire.................................................... KGM
14 - - - - - -For the manufacture of cold heading stock.......................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Containing by weight 0.25% or more but less than 0.6% of carbon:
21 - - - - - -Round, for the manufacture of wire rope ............................................. KGM
22 - - - - - -Round, for the manufacture of cold heading stock .............................. KGM
23 - - - - - -Other round.......................................................................................... KGM
24 - - - - - -Flat ....................................................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
- - - - -Containing by weight 0.6% or more of carbon:
31 - - - - - -Round, for the manufacture of welding wire ........................................ KGM
32 - - - - - -Round, for the manufacture of wire rope ............................................. KGM
33 - - - - - -Round, for the manufacture of cold heading stock .............................. KGM
34 - - - - - -Other round.......................................................................................... KGM
35 - - - - - -Flat ....................................................................................................... KGM
39 - - - - - -Other .................................................................................................... KGM
7217.20.00 -Plated or coated with zinc Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Containing by weight less than 0.25% of carbon:
11 - - - - - -Round, for the manufacture of wire rope ............................................. KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 20
12 - - - - - -Other round .......................................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Containing by weight 0.25% or more but less than 0.6% of carbon:
21 - - - - - -Round, for the manufacture of wire rope.............................................. KGM
22 - - - - - -Other round .......................................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
- - - - -Containing by weight 0.6% or more of carbon:
31 - - - - - -Round, for the manufacture of wire rope.............................................. KGM
32 - - - - - -Other round .......................................................................................... KGM
39 - - - - - -Other .................................................................................................... KGM
7217.30.00 -Plated or coated with other base metals Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Containing by weight 0.6% or more of carbon:
11 - - - - - -Round, plated or coated with copper.................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7217.90.00 -Other Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Round ..................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
III. -STAINLESS STEEL
72.18 Stainless steel in ingots or other primary forms; semi-finished products
of stainless steel.
7218.10.00 00 -Ingots and other primary forms TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Other:
7218.91.00 00 - -Of rectangular (other than square) cross-section TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 21
Issued July 1, 2020
7218.99.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Blooms, billets, rounds, slabs and sheet bars........................................ TNE
90 - - - - -Other ...................................................................................................... TNE
72.19 Flat-rolled products of stainless steel, of a width of 600 mm or more.
-Not further worked than hot-rolled, in coils:
7219.11.00 00 - -Of a thickness exceeding 10 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7219.12.00 00 - -Of a thickness of 4.75 mm or more but not exceeding 10 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7219.13.00 00 - -Of a thickness of 3 mm or more but less than 4.75 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7219.14.00 00 - -Of a thickness of less than 3 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Not further worked than hot-rolled, not in coils:
7219.21.00 - -Of a thickness exceeding 10 mm Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a width of 600 mm or more but not exceeding 1,830 mm ................. KGM
20 - - - - -Of a width exceeding 1,830 mm............................................................. KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 22
7219.22.00 - -Of a thickness of 4.75 mm or more but not exceeding 10 mm Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Of a width of 600 mm or more but not exceeding 1,830 mm.................. KGM
20 - - - - -Of a width exceeding 1,830 mm............................................................. KGM
7219.23.00 00 - -Of a thickness of 3 mm or more but less than 4.75 mm KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7219.24.00 00 - -Of a thickness of less than 3 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Not further worked than cold-rolled (cold-reduced):
7219.31.00 00 - -Of a thickness of 4.75 mm or more KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7219.32.00 - -Of a thickness of 3 mm or more but less than 4.75 mm Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -300 Series .............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7219.33.00 - -Of a thickness exceeding 1 mm but less than 3 mm Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -300 Series .............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7219.34.00 - -Of a thickness of 0.5 mm or more but not exceeding 1 mm Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -300 Series .............................................................................................. KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 23
Issued July 1, 2020
90 - - - - -Other ...................................................................................................... KGM
7219.35.00 - -Of a thickness of less than 0.5 mm Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -300 Series .............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7219.90.00 00 -Other KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
72.20 Flat-rolled products of stainless steel, of a width of less than 600 mm.
-Not further worked than hot-rolled:
7220.11.00 00 - -Of a thickness of 4.75 mm or more KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7220.12.00 00 - -Of a thickness of less than 4.75 mm KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7220.20.00 -Not further worked than cold-rolled (cold-reduced) Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -300 Series .............................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7220.90.00 00 -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 24
7221.00.00 Bars and rods, hot-rolled, in irregularly wound coils, of stainless steel. Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -Rounds:
11 - - - - - -300 Series ............................................................................................ KGM
19 - - - - - -Other .................................................................................................... KGM
20 - - - - -Wire rods ................................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
72.22 Other bars and rods of stainless steel; angles, shapes and sections of
stainless steel.
-Bars and rods, not further worked than hot-rolled, hot-drawn or
extruded:
7222.11.00 - -Of circular cross-section Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -High nickel alloy steel:
11 - - - - - -With a diameter of 25 mm or more....................................................... KGM
12 - - - - - -With a diameter of less than 25 mm..................................................... KGM
- - - - -Other:
21 - - - - - -With a diameter of 25 mm or more....................................................... KGM
22 - - - - - -With a diameter of less than 25 mm..................................................... KGM
7222.19.00 - -Other Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -High nickel alloy steel:
11 - - - - - -Flat bars ............................................................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Other:
21 - - - - - -Flat bars ............................................................................................... KGM
29 - - - - - -Other .................................................................................................... KGM
7222.20.00 -Bars and rods, not further worked than cold-formed or cold-finished Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -High nickel alloy steel:
11 - - - - - -Rounds, with a diameter of 25 mm or more ......................................... KGM
12 - - - - - -Rounds, with a diameter of less than 25 mm ....................................... KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Other:
91 - - - - - -Rounds, with a diameter of 25 mm or more ......................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 25
Issued July 1, 2020
92 - - - - - -Rounds, with a diameter of less than 25 mm....................................... KGM
93 - - - - - -Flat bars ............................................................................................... KGM
99 - - - - - -Other .................................................................................................... KGM
7222.30.00 -Other bars and rods Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -High nickel alloy steel, forged:
11 - - - - - -Rounds................................................................................................. KGM
19 - - - - - -Other .................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7222.40.00 00 -Angles, shapes and sections KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7223.00.00 Wire of stainless steel. Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Not coated or covered............................................................................ KGM
20 - - - - -Coated or covered.................................................................................. KGM
IV. -OTHER ALLOY STEEL; HOLLOW DRILL BARS AND RODS, OF
ALLOY OR NON-ALLOY STEEL
72.24 Other alloy steel in ingots or other primary forms; semi-finished
products of other alloy steel.
7224.10.00 00 -Ingots and other primary forms TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7224.90.00 00 -Other TNE Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
72.25 Flat-rolled products of other alloy steel, of a width of 600 mm or more.
-Of silicon-electrical steel:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 26
7225.11.00 00 - -Grain-oriented KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7225.19.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7225.30.00 00 -Other, not further worked than hot-rolled, in coils KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7225.40.00 -Other, not further worked than hot-rolled, not in coils Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Heat treated............................................................................................ KGM
20 - - - - -Other, of a width of 600 mm or more but not exceeding 1,525 mm ....... KGM
30 - - - - -Other, of a width exceeding 1,525 mm but not exceeding 1,830 mm .... KGM
40 - - - - -Other, of a width exceeding 1,830 mm but not exceeding 2,450 mm .... KGM
50 - - - - -Other, of a width exceeding 2,450 mm................................................... KGM
7225.50.00 00 -Other, not further worked than cold-rolled (cold-reduced) KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
-Other:
7225.91.00 00 - -Electrolytically plated or coated with zinc KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7225.92.00 00 - -Otherwise plated or coated with zinc KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 27
Issued July 1, 2020
7225.99.00 00 - -Other KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
72.26 Flat-rolled products of other alloy steel, of a width of less than 600 mm.
-Of silicon-electrical steel:
7226.11.00 00 - -Grain-oriented KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7226.19.00 00 - -Other KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7226.20.00 00 -Of high speed steel KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
-Other:
7226.91.00 00 - -Not further worked than hot-rolled KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7226.92.00 00 - -Not further worked than cold-rolled (cold-reduced) KGM Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7226.99.00 - -Other Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Plated or coated with zinc ...................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 28
72.27 Bars and rods, hot-rolled, in irregularly wound coils, of other alloy steel.
7227.10.00 00 -Of high speed steel KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7227.20.00 00 -Of silico-manganese steel KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7227.90.00 -Other Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Wire rods ................................................................................................ KGM
20 - - - - -Flat bars ................................................................................................. KGM
30 - - - - -Rounds ................................................................................................... KGM
40 - - - - -Squares .................................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
72.28 Other bars and rods of other alloy steel; angles, shapes and sections, of
other alloy steel; hollow drill bars and rods, of alloy or non-alloy steel.
7228.10.00 00 -Bars and rods, of high speed steel KGM Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
7228.20.00 -Bars and rods, of silico-manganese steel Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Flat bars ................................................................................................. KGM
20 - - - - -Rounds ................................................................................................... KGM
30 - - - - -Squares .................................................................................................. KGM
90 - - - - -Other ...................................................................................................... KGM
7228.30.00 -Other bars and rods, not further worked than hot-rolled, hot-drawn or
extruded
Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Flat bars ................................................................................................. KGM
- - - - -Rounds:
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
72 - 29
Issued July 1, 2020
21 - - - - - -Mold steel............................................................................................. KGM
22 - - - - - -Tool steel ............................................................................................. KGM
29 - - - - - -Other .................................................................................................... KGM
90 - - - - -Other ...................................................................................................... KGM
7228.40.00 -Other bars and rods, not further worked than forged Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
10 - - - - -Mold steel............................................................................................... KGM
20 - - - - -Tool steel................................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
7228.50.00 -Other bars and rods, not further worked than cold-formed or cold-
finished
Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
10 - - - - -Mold steel............................................................................................... KGM
20 - - - - -Tool steel................................................................................................ KGM
90 - - - - -Other ...................................................................................................... KGM
7228.60.00 00 -Other bars and rods KGM Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
7228.70.00 -Angles, shapes and sections Free CCCT, LDCT, GPT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
- - - - -L sections, not further worked than hot-rolled, cold-rolled, drawn or
extruded:
11 - - - - - -Equal legs ............................................................................................ KGM
12 - - - - - -Unequal legs ........................................................................................ KGM
- - - - -Wide flange H sections, not further worked than hot-rolled, cold-rolled,
drawn or extruded:
21 - - - - - -Of a height not exceeding 150 mm ...................................................... KGM
22 - - - - - -Of a height exceeding 150 mm ............................................................ KGM
30 - - - - -Other H sections, not further worked than hot-rolled, cold-rolled, drawn
or extruded ............................................................................................. KGM
- - - - -I sections, not further worked than hot-rolled, cold-rolled, drawn or
extruded:
41 - - - - - -American standard, of a height not exceeding 150 mm....................... KGM
42 - - - - - -American standard, of a height exceeding 150 mm............................. KGM
49 - - - - - -Other .................................................................................................... KGM
50 - - - - -U sections, not further worked than hot-rolled, cold-rolled, drawn or
extruded ................................................................................................. KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
Issued July 1, 2020
72 - 30
60 - - - - -T sections, not further worked than hot-rolled, cold-rolled, drawn or
extruded ................................................................................................. KGM
70 - - - - -Z sections, not further worked than hot-rolled, cold-rolled, drawn or
extruded ................................................................................................. KGM
- - - - -Other shapes or sections, not further worked than hot-rolled, cold-
rolled, drawn or extruded:
81 - - - - - -Bearing pile .......................................................................................... KGM
82 - - - - - -Curved grader blade sections .............................................................. KGM
83 - - - - - -Track shoe profile bars of steel, of a width of 190 mm or more but not
exceeding 350 mm and of a height not exceeding 150 mm, for use in
the manufacture of track shoes for track-laying machinery or vehicles KGM
89 - - - - - -Other .................................................................................................... KGM
- - - - -Other:
91 - - - - - -L sections ............................................................................................. KGM
92 - - - - - -H or I sections ...................................................................................... KGM
93 - - - - - -U sections............................................................................................. KGM
99 - - - - - -Other .................................................................................................... KGM
7228.80.00 -Hollow drill bars and rods Free CCCT, LDCT, UST,
MXT, CIAT, CT, CRT,
IT, NT, SLT, PT, COLT,
JT, PAT, HNT, KRT,
CEUT, UAT,
CPTPT: Free
- - - - -Not further worked than hot-rolled:
11 - - - - - -Round, alloy steel................................................................................. KGM
12 - - - - - -Round, non-alloy steel.......................................................................... KGM
18 - - - - - -Other, alloy steel .................................................................................. KGM
19 - - - - - -Other .................................................................................................... KGM
- - - - -Other:
91 - - - - - -Round, alloy steel................................................................................. KGM
92 - - - - - -Round, non-alloy steel.......................................................................... KGM
98 - - - - - -Other, alloy steel .................................................................................. KGM
99 - - - - - -Other .................................................................................................... KGM
72.29 Wire of other alloy steel.
7229.20.00 00 -Of silico-manganese steel KGM Free AUT, NZT, CCCT, LDCT,
UST, MXT, CIAT, CT,
CRT, IT, NT, SLT, PT,
COLT, JT, PAT, HNT,
KRT, CEUT, UAT,
CPTPT: Free
7229.90.00 -Other Free AUT, NZT, CCCT, LDCT,
GPT, UST, MXT, CIAT,
CT, CRT, IT, NT, SLT,
PT, COLT, JT, PAT,
HNT, KRT, CEUT, UAT,
CPTPT: Free
- - - - -Not coated or covered:
11 - - - - - -Cold heading and forging quality.......................................................... KGM
19 - - - - - -Other .................................................................................................... KGM
20 - - - - -Coated or covered .................................................................................. KGM
CUSTOMS TARIFF - SCHEDULE
Tariff Item
SS Description of GoodsUnit of Meas.
MFNTariff
ApplicablePreferential Tariffs
top related