al maktoum airport

HOW TO PREPARE SAFETY SIGNAGES/POSTERS IN LOW COST.

3/25/2010 Prepared by .S.Nellaiappan.Senior HSE Advisor.ETA ASCON STAR GROUP OF COMPANIES

Al Maktoum International Airport,Jebel Ali ,Dubai. DLC HQ and Office Park

Safety Board-Stage-1

• Make required standard sizes wooden ply/Steel plate etc.• Clean entire area by clothes.• Avoid damaged wooden ply wood.

Ply wood

Primer application. Stage -2Smooth surface wooden ply wood laid in ground.Apply Plastic emulsion 310 sun yellow primer over the board. Keep an hour for dryness.

Primer applied dry board ready for next stage process

Primer applied Board

Primer

Fluorescent paint application. Stage -3Flourecent paint applied board is ready for next process

Fluorescent paint applied board is kept for dryness.

Fluorescent paint board

Masking tape application. Stage -4

Masking tape is applied in painted board.

Masking tape is applied

Masking tape

Computer Message. Stage -5• Computer message print out

to be arranged.• Display over the stencil

materials.• Mark on stencil materials.• Prepare stencil as you

required for the project.• Produce required stencil for

the entire project • Finally apply over the masking

tape applied board to prepare safety signage boards

Stencil Preparation. Stage -6• Computer printed message

alphabets/picture to be fixed in stencil material.

• Remove the message area.• We can use wood

board/aluminium/laminated paper etc for stencil preparation

3/25/2010 Prepared by .S.Nellaiappan.Senior HSE Advisor.ETA ASCON STAR GROUP OF COMPANIES 7

stencil

Stencil. Stage -6

stencil

Stencil alignment/Marking .Stage -7

Stencil marked area removed

Stencil fixed in alignment (Keep stencil in centre of the board and

mark by pen in board

Signage preparation guide lines

from Mr.Md.shahid HSE Manager

Line marking by Using Pen

Cutting masking tape. Stage -8• Stencil Marked message area is

cut by the cutter.• It is ready for paintings.• We can spray paint over the

stencil cut area.• After the painting, we will get

exactly our required message in board.

Olfa 30 degree stainless steel cutterStencil

marked area cut by cutter

Spray painting. Stage -9• The various color painting spray

cans are available.• The spray paint is sprayed over

the prepared board.• Leave for one day and remove

the entire masking tape.• We can get final ready board for

Spray Painting

in progress

Removal of masking tape. Stage -10

Paint is applied in stencil marked area and remove masking tape.

Now board is ready for usage.

Removal of

masking tape after

painting.

Signages storage office• Various boards are prepared and

kept in signage's room.• Readymade boards stocked in

room. it shall be installed according to the site requirements.

Signages at site

Board with stand

Signages

Signage stickers

Sample signages.

International Standard signage's are available freely in internet. These can be down loaded and it shall be used according to the requirementsWe can make stencil.

Laminated colour A4

paper print out

Traffic signs and road markings

Painting safety posters• These shall be downloaded from

internet and take the print out.• Print out board shall be fixed in

wooden ply or apply laminated paper or cover plastic paper.

• It can be made by applying paint through the painters.

• Display in site.

Pictorial safety Boards

Pictorial and various language laminated safety posters displayed in safety camping

Workforces reading the safety message

Safety posters in different language were displayed

Workforce looking at

safety postersS.Nellaiappan,Sr.HSE Advisor

Safety camping safety boards

Mr.Md.shahid HSE managerHeat stress awareness camping

Displayed digital flex Banner/power tool/heat stress camping

Video visual trainings

Safety wall Paintings

Your family is waiting for you message in canteen wall .The message can reach

faster in public gathering place.Saint Gobain construction

Flex Safety Banner

Flex safety banner displayed .it can be shifted easily everywhere in construction site.

DLC HQ Signage team(Responsible for preparation Signage /Planning/installation/

maintenance in entire site above mentioned project)

DLC HQ Signage team/signage preparation office

Road direction signs planning

The picture has taken from Google Earth for planning road traffic signs

Understanding Safety Signs• Signs are used to prevent accidents. They are common in the work area, along the

roadside, and in public buildings. OSHA has some specific requirements for signs. The requirements are in place to make sure hazard warnings are easy to recognize and don't vary from workplace to workplace. This week's Tail Gate Safety Topic takes a look at different types of signs; what they mean, and how they should be used.

• OSHA defines signs as "the warnings of hazard, temporarily or permanently affixed or placed, at locations where hazards exist." Danger signs must only be used where an immediate hazard exists. Their appearance is specified by OSHA. These signs are red, black (or contrasting color), and white with room for words or symbols to describe the danger. Danger signs are common in areas where high voltages exist and where automatically-starting equipment is in use. You may be aware of other hazards which warrant the use of a danger sign.

• Warning signs are orange with black (or a contrasting color) lettering or symbols. They are used to warn against hazards which aren't quite as serious as those requiring a danger sign-but are more serious than those requiring a caution sign. Warning signs may alert us to forklift traffic or similar hazards.

• Caution signs must be used only to warn against potential hazards or to caution against unsafe work practices. Caution signs are predominately yellow with a black (or contrasting color) panel at the top of the sign. The word "caution," written in yellow appears on the panel. The lower part of the sign is used for additional wording which must be written in black (or a contrasting color). Caution signs warn of numerous hazards-everything from slippery floors to reminding us to wear safety glasses. Even traffic signals take a cue from the yellow caution sign as they warn us to be careful on the road. • Special signs are used just for biological hazards and radiation hazards. The biological hazard (biohazard) sign is fluorescent orange or orange-red with letters or symbols in a contrasting color. The biohazard sign alerts us to the presence or potential presence of blood or other biological hazards. Radiation hazards are identified with a sign bearing the familiar three-bladed radiation symbol in black or magenta or red on a yellow background. • Safety instruction signs are used to provide information about safety. They are not used to warn against specific hazards. These green and white signs remind you to report accidents, help locate first-aid equipment, and direct you along an evacuation route. • Though signs are never a substitute for good safety procedures and training, they are useful to remind us of hazards and ways we can protect against them. Always take seriously the information on a sign-whether in the workplace or on the road. Understanding signs and the hazards they warn us about can help prevent injuries and save lives.

Danger signs.

The DANGER header is used when there is a hazardous situation which has a high probability of death or severe injury. It should not be considered for property damage

unless personal injury risk is present. There shall be no variation in the type of design of signs posted to warn of specific dangers and radiation hazards. (ii) All employees shall be instructed that danger signs indicate immediate danger and that special precautions are necessary.

Caution signs.

The CAUTION header is used to indicate a hazardous situation which may result in minor or moderate injury. However, Caution should not be used when there is a possibility of death or serious injury. Caution should not be considered for property damage accidents unless personal injury risk is present.

Caution signs shall be used only to warn against potential hazards or to caution against unsafe practices. (ii) All employees shall be instructed that caution signs indicate a possible hazard against which proper precaution should be taken.

Standard color of the background shall be yellow; and the panel, black with yellow letters. Any letters used against the yellow background shall be black. The colors shall be those of opaque glossy samples as specified in Table 1 of American National Standard Z53.1-1967

Safety instruction signs

General Safety Signs (SAFETY FIRST, BE CAREFUL, THINK) should indicate general instructions relative to safe work practices, reminders of proper safety procedures, and the location of safety equipment.

Safety instruction signs shall be used where there is a need for general instructions and suggestions relative to safety measures.

Standard color of the background shall be white; and the panel, green with white letters. Any letters used against the white background shall be black. The colors shall be those of opaque glossy samples as specified in Table 1 of American National Standard, Z53.1-1967.

Biological hazard signs.

The biological hazard warning shall be used to signify the actual or potential presence of a biohazard and to identify equipment, containers, rooms, materials, experimental animals, or combinations thereof, which contain, or are contaminated with, viable hazardous agents.

For the purpose of this subparagraph the term "biological hazard," or "biohazard," shall include only those infectious agents presenting a risk or potential risk to the well-being of man.

Slow-moving vehicle emblem.

This emblem (see fig. J-7) consists of a fluorescent yellow-orange triangle with a dark red reflective border. The yellow-orange fluorescent triangle is a highly visible color for daylight exposure. The reflective border defines the shape of the fluorescent color in daylight and creates a hollow red triangle in the path of motor vehicle headlights at night. The emblem is intended as a unique identification for, and it shall be used only on, vehicles which by design move slowly (25 m.p.h. or less) on the public roads.

The emblem is not a clearance marker for wide machinery nor is it intended to replace required lighting or marking of slow-moving vehicles. Neither the color film pattern and its dimensions nor the backing shall be altered to permit use of advertising or other markings.

The material, location, mounting, etc., of the emblem shall be in accordance with the American Society of Agricultural Engineers Emblem for Identifying Slow-Moving Vehicles, ASAE R276, 1967, or ASAE S276.2 (ANSI B114.1-1971), which are incorporated by reference as specified in § 1910.6.

For more information on this subject you are encouraged to review any of the numerous audiovisual materials such as, videotapes, handouts, pamphlets, etc., which are available from the Safety & Fire Prevention Department on request at Ext. 3670.

You may also get additional information on the

Internet at www.osha.gov

More Information

al maktoum airport

prepared board

senior hse

ascon star group of

required stencil

board primer

stencil preparation

safety boardstage

stencil materials

Documents

be at one - oryx world | real...

powerpoint presentation fileburj khalifa dubai int'l airport...

a perfect community living experience · airport al maktoum...

mohamed al khateeb on mohammed bin rashid al maktoum award...

top 20 quotes from sheikh mohammed bin rashid al maktoum

h.h. sheikh mohammed bin rashid al maktoum endurance cup ·...

royal pavilion, al maktoum airport dubai … helishow 2018...

where business meets real estate - deloitte us | … · •...

9689 ds freight house blueprints...

damac stone villas brochure - privilege dubai · dubai...

market insights - dubai airshow · expansion of al maktoum...

mohammed bin rashid al maktoum

úlmilll . slij0 ijl*.njl al maktoum foundation kuwaiti

unidos emiratos Árabes - comercio.gob.es€¦ · sheikh...

hamdan bin mohammed bin rashid al maktoum photographer

under the patronage of h.h sheikh ahmed bin saeed al...

hh sheikh mohammed bin rashid al maktoum …...2017/08/21...

concorde world tour - ivao.aero world tour 2017… · 15...

jafza one where businesses connect -...

mohammed bin rashid al maktoum solar park