alkali bulletin - alkali manufacturers association of...
Post on 30-Apr-2020
3 Views
Preview:
TRANSCRIPT
Alkali BulletinAlkali Bulletin(For Restricted Circulation) June 2018Volume XL No. 06
AMAI june 2018.indd 1 07-08-18 5:24:03 PM
AMAI june 2018.indd 2 07-08-18 5:24:04 PM
Dear Reader
The World Environment Day (WED) was observed on 5th June with India playing the global host this year. The theme for this year’s edition of WED was “Beat Plastic Pollution”, which undoubtedly generated a lot of interest. The world came together to voice their concern and take a unified stand on combating single-use plastic pollution.
Plastics are considered one of the most useful inventions of the century with its versatility making life easier for everyone. It is difficult to imagine a world without plastics – it is difficult to find a facet of life untouched by plastics. Yet for all its usefulness, plastics have generated concern for the way they are disposed off after use, earning notoriety. Of particular concern are single-use plastics which are difficult to dispose off.
Some alarming statistics about plastics have brought undue attention to the material: every year the world uses 500 billion plastic bags; each year, at least 8 million tonnes of plastic end up in the oceans, the equivalent of a full garbage truck every minute; in the last decade, we produced more plastic than in the whole last century; 50 per cent of the plastic we use is single-use or disposable; we buy 1 million plastic bottles every minute; Plastic makes up 10% of all of the waste we generate. Adding to the concern are rumours that gain currency through social media and which aid in projecting plastics as an evil. Many of these are based on perceptions and unverified information. A famous example is the fanciful figure of 500 million straws being thrown away by Americans daily – a scary figure conjured up by a 9-year old in 2011 and which reappeared in the media this year. This figure had no basis.
Plastics per se do not cause harm – it is the way we use and dispose off that cause concern. To label every form of plastic as harmful will be unfair.
We all owe it to our environment and to the future generations to ensure that plastics are disposed off or recycled responsibly, that plastic waste is discarded with proper care. While the usefulness of plastics is universally acknowledged, we also need to decide whether to project plastics as a friend or foe – something that is entirely in our hands and the way we would like the world to believe.
K. Srinivasan Secretary General
AMAI june 2018.indd 3 07-08-18 5:24:04 PM
I. ARTICLES & FEATURES 22nd World Chlor-Alkali Conference organised by ICIS & Tecnon Orbichem at Singapore on 1 21-22 June 2018 – A Report by Harjeet Kaur Anand, Joint Director (Tech.), AMAI
Corrosion Management-Economics and Principles of Corrosion - Dr. S.K. Chakravorty, 15 Consultant (Plant Engineering)
Overview of GPS Central Control Tower (CCT) – D.K. Chaubey, Grasim Industries Ltd. 23 (Chemical Division Nagda)
Chlor-Alkali Industries observed 46th World Environment Day on 5th June 2018 – A Report 24
Orient Paper Mills – Caustic Soda Unit, Anuppur, awarded with Greentech Environment Platinum 28 Award 2018 on 31.05.2018
GHCL bags Dun & Bradstreet Corporate award in chemicals category 29
Incident Report No.95: Accident of a Truck Transporting Chlorine Tonners 30
Incident Report No.96: Bleach Cargo Tank Landing Gear Failure 31
Beacon-Messages for Manufacturing Personnel 32
II. NEWS DIGESTBEE: Raising AC setting by 1° C can save 6% power 34
Industries need not share their emission data - CPCB 34
Gujarat to scale up use of treated wastewater 34
India among the top five countries in e-waste generation 35
After three decades, truck axle load to be hiked by 20-25% 35
To meet WTO norms, India may have to withdraw popular export schemes by next fiscal 36
Power Minister plugs prepaid smart meters 36
By 2022, India vows to stop single-use plastics 37
Grasim eyes Rs. 1,200-cr. additional revenue from chemical expansion 37
Depreciated power assets must result in tariff reduction, proposes new tariff policy 38
III. NOTIFICATIONS/PRESS RELEASES/ MEMORANDA
Press Release - Shri S. Ramesh takes over as Chairman, Central Board of Indirect Taxes and Customs 38
IV. UPCOMING SEMINARS/CONFERENCES/WORKSHOPSIHS Markit to organise World Chlor-Alkali Conference on 12 September 2018 at Bordeaux, France 41 (Training Workshop on 11 September 2018) – AMAI is Association Partner
Chlorine Emergency Response Network Toll free no. 1800-11-1735
Alkali Bulletin June, 2018
Disclaimer: Information published in this magazine is reproduced from various sources. Every effort is made to minimize errors while reproducing for publication in Alkali Bulletin. However, readers are requested to verify and make appropriate enquiries and satisfy themselves about the veracity of information published in this magazine before use. The publisher or AMAI will not be responsible for decisions taken by readers based on information published in Alkali Bulletin.
CONTENTS
AMAI june 2018.indd 4 07-08-18 5:24:04 PM
Alkali Bulletin June, 2018
We Are one the Leading Buyer for the below items in both Used & Unused condition From “ALKALIES CHEMICAL PLANT”
TITANIUM ANODE & NICKEL CATHODES And ALL TYPE OF FERROUS & NON FERROUS METAL ITEMS : . Specially,
o o o o o o
CONTACT. PERSON:
Mr. NARENDRA CHOUDHARY - M. # 91 9769440266
Mr. KULDEEP CHOUDAHRY - M.# 91 9004446667
AMAI june 2018.indd 5 07-08-18 5:24:05 PM
AMAI june 2018.indd 14 07-08-18 5:24:16 PM
Orient Paper Mills – Caustic Soda Unit Honoured with 18th Annual Greentech Environment Award 2018
Mr. S. S. Tyagi, Sr. Manager (Q.A. & E.P.) receiving the Greentech Environment Platinum Award 2018
Orient Paper Mills – Caustic Soda Unit, Anuppur, M.P. have been awarded with Greentech Environment Platinum Award 2018 in Chemical Sector on 31.05.2018.
Alkali Bulletin June 2018 | 28
AMAI june 2018.indd 28 07-08-18 5:24:23 PM
Did You Know? The work permit did not warn the
maintenance crew about the nitrogen purge. As soon as the maintenance crew decided to
remove the roll of tape by reaching into the vessel, the scope of the job changed. The original permit did not consider the need to remove anything from inside the vessel. A new permit should have been issued, considering potential confined space entry to remove the tape.
In this case, a confined space entry permit was required, even for a person to reach into the vessel to remove the tape. When any part of the body of a person breaks the plane of an opening large enough to allow full entry, a confined space permit is required. This is the position of US OSHA and other authorities.
This issue sponsored by
http://www.aiche.org/CCPS/Publications/Beacon/index.aspxMessages for Manufacturing Personnel
Recognize a change in scope of work for a permitted job!
www.aiche.org/ccps
June 2018
©AIChE 2018. All rights reserved. Reproduction for non-commercial, educational purposes is encouraged. However, reproduction for any commercial purpose without express written consent of AIChE is strictly prohibited. Contact us at ccps_beacon@aiche.org or 646-495-1371.
The Beacon is usually available in Afrikaans, Arabic, Catalan, Chinese, Czech, Danish, Dutch, English, Filipino, French, German, Greek, Gujarati, Hebrew, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Malay, Marathi, Mongolian, Persian (Farsi), Polish, Portuguese, Romanian, Russian, Spanish, Swedish, Telugu, Thai, Turkish, Urdu, and Vietnamese.
Work Permits – Understand the Scope of WorkA contractor maintenance crew was preparing to install a
section of pipe at the top of a vessel in an oil refinery (1,2). A work permit (3) was issued for the job, with the expectation that no confined space entry was required. The scope of work was only to install the pipe section. The permit indicated that “Nitrogen Purge or Inerted” was N/A (Not Applicable) although the vessel was being purged with nitrogen (4).
Workers noticed that a roll of tape had been left inside the vessel (5) and decided to try to remove it before installing the pipe (6). They were unable to remove the tape using a long wire. At this point, a worker tried to get closer to remove the tape and was overcome by the oxygen depleted atmosphere near the opening and fell into the vessel. It is also possible that he may have climbed into the vessel to remove the tape, planning to quickly climb back out. The worker collapsed inside the vessel, and, to make the tragedy worse, a co-worker entered the vessel in a rescue attempt and also collapsed in the nearly pure nitrogen atmosphere. Both workers died from nitrogen asphyxiation.
This incident has been discussed in other Beacons – June 2012 about nitrogen hazards, and April 2015 on the importance of work permit procedures. But there is another lesson – the importance of recognizing a change in scope of work for any job which requires a work permit. The change might introduce additional hazards which require additional safeguards.
If you issue a work permit, be sure that:o Hazards are identified and explained to the people doing the work.o Required safety procedures are specified and understood.o Personal protective equipment is available and used.o The people doing the work clearly understand the scope of work,
and the need to stop work and contact you before they do anything not included the initial job scope.
If you are working on a job requiring a work permit:o Understand the hazards, safety procedures, and protective
equipment.o Understand the job scope.o As you do the job, ensure for every step that you recognize any
change in the scope of work. Stop the job and consult the person who issued the permit before you do anything not included in the initial job scope!
o If you are not sure if the job scope has changed, stop and ask the person who issued the permit.
NOAA/Institute for Exploration/University of Rhode Island (NOAA/IFE/URI) Public domain.
What Can You Do?
1 2
4
6
3
5
Pictures from US Chemical Safety Board Video - http://www.csb.gov/videos/hazards-of-nitrogen-asphyxiation/
http://www.dekra-process-safety.com/
AMAI june 2018.indd 32 07-08-18 5:24:26 PM
AMAI june 2018.indd 33 07-08-18 5:24:28 PM
AMAI june 2018.indd 39 07-08-18 5:24:29 PM
AMAI june 2018.indd 40 07-08-18 5:24:30 PM
REGISTER NOW www.ihsmarkit.com/GCAC2018
Climbing the upward hill of the chlor-alkali cycle: What comes next and when? The chlor-alkali industry has a long history of cyclicality. Economic cycles catalyze demand that puts producers in the driver’s seat and justifies new capacity, economic slowdowns and capacity overbuilds shift advantage to buyers. Where are we in that cycle and what does it mean for the future of prices, producer margins, and potential new capacity?
The Global Chlor-alkali Conference will explore the impacts of recent technology, environmental policy changes, and supply and demand expectations, to answer important strategic questions about pricing, product availability and new capacity outlooks, including:
‒ When will increasing margins support new capacity?
‒ Where is new capacity likely to be placed?
‒ How much will the market tighten before new capacity eases the supply and demand balance?
Following the success of our inaugural conference in 2017, IHS Markit are delighted to be hosting the second Global Chlor Alkali in Bordeaux. Attend this conference for the latest industry insight and analysis, on what is coming in the chlor-alkali world.
Who should attend? Producers, buyers, distributors, traders, financial analysts, and technology and equipment providers will find value in this new event.
Training Workshop | Tuesday, 11 September Introduction to Chlor Alkali A brand new training workshop will precede the conference on Tuesday 11th September
215225214-SK-0218
Global Chlor-Alkali Conference Bordeaux, France | Conference, Wednesday 12 Sept | Training Workshop, Tuesday 11 Sept
Lynn Urban Delegate Sales T +1 303 397 2801 E Lynn.Urban@ihsmarkit.com
Ben Kinberg Partnership Opportunities T +1 212 425 8116 E Ben.Kinberg@ihsmarkit.com
Association partner:
AMAI june 2018.indd 41 07-08-18 5:24:30 PM
AMAI june 2018.indd 42 07-08-18 5:24:31 PM
Published by ALKALI MANUFACTURERS ASSOCIATION OF INDIA3rd Floor, Pankaj Chambers, Preet Vihar Commercial Complex, Vikas Marg, Delhi 110092Ph: 011- 22432003, 22410150Email: hkanand@ama-india.org; info@ama-india.org;website: www.ama-india.org
desi
gn &
pri
nt by
GEN
ESIS
/ g
enesi
sadvt
@hotm
ail.
com
/ g
enesi
sonlin
e.in /
9810033682
AK TYAGI
TURNKEY PROJECTS DELIVERED IN 32+ COUNTRIES
Chairman, Nuberg Engineering
India based Global EPC Company
Operating in 32+ Countries
115000 sqm. Manufacturing Facility in Gujarat
750+ Engineering Professionals
R&D Facility in Sweden
TURKEYSulfuric Acid EPC Project
SWEDENChlor Alkali EPC Project
BANGLADESHHydrogen Peroxide EPC Project
EGYPTSulfuric Acid EPC Project
PARAGUAYChlor Alkali EPC Project
ALGERIAChlor Alkali EPC Project
SAUDI ARABIAAnisole EPC Project
ABU DHABIChlor Alkali EPC Project
EPC & LSTK SOLUTIONS ACROSS INDUSTRIES
Nuberg EPC is a global EPC and turnkey project management company providing solutions
with basic engineering and process know-how either from its own intellectual property or
licensed from technology suppliers. Having set up 15+ greenfield plants worldwide with
modern technology, Nuberg is one of the fastest growing EPC companies in Chlor Alkali,
Hydrogen Peroxide, Sulfuric Acid and Calcium Chloride. With in-house engineering set up of
over 300000 available man-hours, construction team, state-of-the-art fabrication facility and
Sweden based R&D Centre, we serve worldwide including India, Sweden, Egypt, Abu Dhabi,
Turkey, Algeria, Romania, Saudi Arabia, Oman, Qatar, Bangladesh, Ethiopia and Paraguay.
Engineering
Construction
Project Management
Corporate Office: Nuberg House, A-38 H, Sector-64, Noida-201301, India
Website: www.nubergepc.com | Email: epc@nuberg.in
CHEMICALS AND FERTILIZERS
STEEL NUCLEAR AND DEFENCE
HYDROCARBONS
Technology Know-How
Procurement
NUBERG EPCMaking Ideas Happen
NUBERG EPCMaking Ideas Happen
AMAI june 2018.indd 43 07-08-18 5:24:32 PM
top related