allcon 10 info-blatt en · construction adhesive aallllccoonn 1100 a d h e s i v e s content 150 ml...

Areas of application

Bonding of timber, chip and fibre boards, MDF, coated boards, metals, aluminium, natural or artificial stones, concrete, marble, ceramics, plastics, plasterboards, foam (EPS), hard foam, acrylic, insulation and much more

Features

Bonds nearly all materials Single component Easy handling Solvent-free EMICODE EC 1 Plus – very low emission Resistant to weather and ageing Resistant to many chemicals Frost-proof Usable with natural stone

Benefi ts of use

Use with standard caulking gun Can be put under stress after just

7 to 10 minutes No primer required Replaces multiple other adhesives and glues Safe to use Always the right product to hand Opened cartridge can be used up to 10 months;

unopened cartridge lasts up to 18 months Minimum wastage Can be painted and varnished Suitable for indoor and outdoor use

Professional quality Tested according to

WATT 91 DIN EN 204 D4

Allcon 10Construction Adhesive

Allcon 10

A

dhes

ives

The

Original

Construction AdhesiveAllcon 10Allcon 10

Adh

esiv

es

Content 150 mlArt.-No. 260 100 150EN

Content 310 mlArt.-No. 260 100 310EN

Industry Trade

Directions for useThesurfacestobebondedmustbefreefromgrease,cleanandstable;onesurfacemustbepermeable.The adhesive reacts with the moisture in the air or in the material by slightly foaming up. Curing can be accelerated by using a water spray.Sandallsmoothmaterials,cleanwithbeko Allcleanandlightlymoistenwith water (approx. 20 g/m²). Join pieces within3 minutes. Press until product sets. We generallyrecommendanadhesiontestpriortoanyapplications.In thecaseof incorrect or improper application, anyproductwarrantybecomesvoid.Forprofessionalandindustrialuseonly.

Range of use Bondingofskirtingboardsandmetalthresholds Fixingcovers Installationofcablechannels Levellingslightlyunevensurfaces Repairoftorn-outscrews,hingesetc. Gluingwood Bondingalltypesoffoam(ESP),e.g.tubsupports

andinsulationmaterials Applicationsarealmostlimitless

Designated uses

Notsuitableforglass,surfacescontainingbitumenorwax,PE,PP,PAEPDM,PTFEorunderwaterbonding.

Byusingasuitableprimerthesurfaceadhesioncanbeimproved.

Pleaseobservesafetydatasheet.

Caution

Technical dataBasis Moisture-curingpolyurethane

Processable from+5° Ctomax.+40° C

Temperature resistantfrom-40° Ctomax.+80° C(shortterm:+120° C)

Skin formation time approx.3minutesunderstandardconditions(+23° C /50%relativeairhumidity)

Curing approx. 3 mm Allcon 10 per 24 hours; approx. 70% surface bonding after 7 to 10 minutes; 100% cured after 30 to 45 minutes

Gap bridging approx.1,0cm

Colour beige

Smell lowodour

Density approx.1,4g/cm³

Viscosity pasty

TestedtestreportinaccordancewithDINEN204D4(waterproofgluing),accordingtoWATT91(+80° C)

Storage life opened cartridge can be used for up to 10 months, unopened cartridge lasts for up to 1½ years

Storage dry,atroomtemperature

Contents/packaging Cartridge 150mlCartridge310ml

20pcs/box12pcs/box

2000pcs/pallet1200pcs/pallet

Art.-No.260100150ENArt.-No.260100310EN

Thispublicationsupersedesallpreviouseditionsandrendersthelatterinvalid.Currentlyvaliddocuments(safetydatasheet)canbeviewedonwww.beko-group.com!Subjecttotechnicalchanges!Printdate:09/2020 Art.-No.2601003109EN