allrounder 1500 t - arburg · platen daylight fixed | variable max. inch | table diameter inch...
Post on 23-Aug-2020
12 Views
Preview:
TRANSCRIPT
DIN US
DIN
DIN US
DIN
US
US
ALLROUNDER 1500 T
Table diameter: 59.06“ (1500 mm)Clamping force: 175, 220, 280, 355 tonsInjection unit: 3.7 oz, 6.1 oz, 8.2 oz, 15.3 oz, 29.1 oz, 45.4 oz
DINUS
DIN
DINUS
DIN
US
US
2
6)
33.3
5
39.3
7
87.0
5
145.
871
) 1
50.3
92)
162
.013
) 1
76.1
84)
149.
211
) 1
52.5
62)
161
.423
) 1
72.4
44)
77.0
5
78.74
183.43
ESPE
92.5
2 8
4.45
8
8.19
78.74
39.3
7
5 )
1)
2)
3)
4)
90.9
4
147.241) 151.772) 163.783) 177.174)
72.9
9
78.0
3
ESPE
MACHINE DIMENSIONS UP TO 220 TONS | 1500 T
Electrical connection
Cooling water connection
Horizontal version
1) Injection unit for 3.7 oz2) Injection unit for 6.1 oz3) Injection unit for 8.2 oz4) Injection unit for 15.3 oz5) Lenght of control cabinet and position of electrical connection may vary due to optional equipment installed6) Position of cooling water connection may vary due to optional equipment installedESPE - Electro-sensitive protective equipment (light curtain)
Mou
ntin
g su
rfac
eRo
tary
pla
ten
Mou
ntin
g su
rfac
eRo
tary
pla
ten
DIN US
DIN
DIN US
DIN
US
US
3
39.2
1
45.2
8
92.9
1
182.
091
)
178.
151
)
82.9
5
62.99
ESPE
206.78
98.4
31)
96.
852
) 7
3.62
3)*
62.994)
45.2
8
96.7
9
78.5
177.171) 193.52) 210.633)
83.5
4
ESPE
5)
Electrical connection
Cooling water connection
Horizontal version
MACHINE DIMENSIONS FROM 280 TONS | 1500 T
ESPE - Electro-sensitive protective equipment (light curtain)* without feed hopperInjection unit 29.1 oz and injection unti 45.4 oz is not available in vertical position1) Injection unit 15.3 oz2) Injection unit 29.1 oz3) Injection unit 45.4 oz4) Lenght of control cabinet and position of electrical connection may vary due to optional equipment installed5) Position of cooling water connection may vary due to optional equipment installed
Mou
ntin
g su
rfac
e
Rota
ry p
late
n
Mou
ntin
g su
rfac
e
Rota
ry p
late
n
DINUS
DIN
DINUS
DIN
US
US
4
EN-US 1500 T
Clamping unit
with clamping force max. tons
Opening force | stroke max. tons | inch |
Mold height, fixed | variable min. inch |
Platen daylight fixed | variable max. inch |
Table diameter inch
Angle of rotation, left/right
Rotation time for 180° min. s
Weight on rotary table max. lbs
Weight of movable mold half max. lbs
Ejector force | stroke max. tons | inch |
Dry cycle time EUROMAP ² 2 pumps min. s - inch -
Accum. min. s - inch
Injection unit
with screw diameter mm 25 35 30 40 35 45
Effective screw length L/D 24 17 23.3 17.5 23 18
Screw stroke max. inch
Calculated stroke volume max. cu. inch 3.6 7.0 6.5 11.5 9.4 15.5
Shot weight max. oz / PS 1.9 3.7 3.4 6.1 5.0 8.2
Material throughput max. lbs/h PS 22.0 35.2 37.4 53.9 55.0 77.0
max. lbs/h PA6.6 11.0 17.6 18.7 27.5 27.5 38.5
Injection pressure max. psi 36250 21315 36250 22185 36250 22910
Holding pressure max. psi 36250 21315 36250 22185 36250 22910
Injection flow ² 2 pumps max. cu. inch/s 7.3 14.4 7.9 14.2 7.8 12.9
Accum. max. cu. inch/s 13.2 25.9 19.3 34.3 30.0 49.7
Screw circumferential 2 pumps max. ft./min 207 262 194 259 154 197
speed ² Accum. max. ft./min 46 62 66 89 52 69
Screw torque max. ft./lbs 155 214 236 317 354 450
Nozzle contact force | retraction stroke max. tons | inch | | |
Heating capacity | zones kW | | |
Feed hopper lbs
Drive and connection
with injection unit 3.7 oz 8.2 oz 3.7 oz 8.2 oz
Net weight of machine lbs 23980 24640
Sound press. level | Ref. only ⁴ dB(A)
Oil filling gal.
Drive power ² max. kW 18.5 22
Electrical connection ³ kW 33 36
Total A 100 | --- 120 | ---
Machine A --- | 35 --- | 50
Heat A 25 | --- 30 | ---
Cooling water connection max. °F
min. Δp psi 22 | 1" 22 | 1"
Machine type
with EUROMAP size designation ¹
1500 T 175 tons 3.7 oz | 6.1 oz | 8.2 oz
2.4
2310
20 | --- ---
77 77
100 | --- ---
--- | 35 ---
18.5 ---
30 ---
70 | 3 70 | 3
68.69 68.69
6.1 oz 6.1 oz
24200 ---
80 80 80
2 pumps Accum.
9.40 5 6.40 5 9.40 5
185 281 406
5.50 11.81 6.60 11.81 6.60 15.75
56 79 62
246 226 174
10.5 10.9 10.2
19.0 26.2 39.2
29000 29000 29000
29000 29000 29000
29.7 45.1 63.8
15.4 23.1 33.0
5.2 8.8 12.3
2.7 4.7 6.5
20 20 20
4.72 5.91 6.30
3.7 oz 6.1 oz 8.2 oz
30 35 40
---
4.3 11.81
1100
4.95 6.89
59.06
180°
27.56 ---
15.75 ---
12.65 11.81
1500 T
175
TECHNICAL DATA | 1500 T
Upon request: other machine types and mold installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive.
1) Clamping force (tons) - size of injection unit = max. stroke volume (cm³) x max. injection pressure (psi)2) Specifications depend on the drive variant / drive configuration.3) Specifications relate to 230/60 cycles | 460V/60 cycles4) Emission sound pressure level at the workplace. Detailed information in the operating instructions.[ ] Specifications apply to alternative equipment.
DIN US
DIN
DIN US
DIN
US
US
5
EN-US 1500 T
Clamping unit
with clamping force max. tons
Opening force | stroke max. tons | inch |
Mold height, fixed | variable min. inch |
Platen daylight fixed | variable max. inch |
Table diameter inch
Angle of rotation, left/right
Rotation time for 180° min. s
Weight on rotary table max. lbs
Weight of movable mold half max. lbs
Ejector force | stroke max. tons | inch |
Dry cycle time EUROMAP ² 2 pumps min. s - inch -
Accum. min. s - inch
Injection unit
with screw diameter mm 35 45 45 55
Effective screw length L/D 23 18 22 18
Screw stroke max. inch
Calculated stroke volume max. cu. inch 9.4 15.5 19.4 28.9
Shot weight max. oz / PS 5.0 8.2 10.3 15.3
Material throughput max. lbs/h PS 55.0 77.0 101.2 129.8
max. lbs/h PA6.6 27.5 38.5 50.6 66.0
Injection pressure max. psi 36250 22910 35815 23925
Holding pressure max. psi 36250 22910 35815 23925
Injection flow ² 2 pumps max. cu. inch/s 7.8 12.9 10.6 15.9
Accum. max. cu. inch/s 30.0 49.7 32.3 48.3
Screw circumferential 2 pumps max. ft./min 154 197 194 259
speed ² Accum. max. ft./min 52 69 49 62
Screw torque max. ft./lbs 354 450
Nozzle contact force | retraction stroke max. tons | inch | |
Heating capacity | zones kW | |
Feed hopper lbs
Drive and connection
with injection unit 8.2 oz 8.2 oz
Net weight of machine lbs 24640
Sound press. level | Ref. only ⁴ dB(A)
Oil filling gal.
Drive power ² max. kW 22
Electrical connection ³ kW 36
Total A 120 | ---
Machine A --- | 50
Heat A 30 | ---
Cooling water connection max. °F
min. Δp psi 22 | 1" 22 | 1"
Machine type
with EUROMAP size designation ¹
1500 T 220 tons 8.2 oz | 15.3 oz
2.4
2310
60 | --- ---
77 77
160 | --- ---
--- | 60 ---
30 ---
55 ---
71 | 3 71 | 3
68.69 68.69
15.3 oz 15.3 oz
25300 ---
80 ---
2 pumps Accum.
9.40 5 19.90 8
406 650
6.60 15.75 7.70 15.75
62 56
174 226
10.2 13.1
39.2 40.0
29000 29000
29000 29000
63.8 116.6
33.0 59.4
12.3 23.9
6.5 12.7
20 20
6.30 7.87
8.2 oz 15.3 oz
40 50
---
4.3 11.81
1100
4.95 6.89
59.06
180°
27.56 ---
15.75 ---
12.65 11.81
1500 T
220
Upon request: other machine types and mold installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive.
1) Clamping force (tons) - size of injection unit = max. stroke volume (cm³) x max. injection pressure (psi)2) Specifications depend on the drive variant / drive configuration.3) Specifications relate to 230/60 cycles | 460V/60 cycles4) Emission sound pressure level at the workplace. Detailed information in the operating instructions.[ ] Specifications apply to alternative equipment.
TECHNICAL DATA | 1500 T
DINUS
DIN
DINUS
DIN
US
US
6
EN-US 1500 T
Clamping unit
with clamping force max. tons
Opening force | stroke max. tons | inch |
Mold height, fixed | variable min. inch |
Platen daylight fixed | variable max. inch |
Table diameter inch
Angle of rotation, left/right
Rotation time for 180° min. s
Weight on rotary table max. lbs
Weight of movable mold half max. lbs
Ejector force | stroke max. tons | inch |
Dry cycle time EUROMAP ² 2 pumps min. s - inch -
Accum. min. s - inch
Injection unit
with screw diameter mm 45 55 55 70
Effective screw length L/D 22 18 22 17
Screw stroke max. inch
Calculated stroke volume max. cu. inch 19.4 28.9 34.0 55.1
Shot weight max. oz / PS 10.3 15.3 18.0 29.1
Material throughput max. lbs/h PS 101.2 129.8 189.2 253.0
max. lbs/h PA6.6 50.6 66.0 94.6 127.6
Injection pressure max. psi 35815 23925 34510 21315
Holding pressure max. psi 35815 23925 34510 21315
Injection flow ² 2 pumps max. cu. inch/s 14.8 22.2 14.5 23.7
Accum. max. cu. inch/s 32.3 48.3 43.6 70.5
Screw circumferential 2 pumps max. ft./min 177 217 131 167
speed ² Accum. max. ft./min 49 62 62 82
Screw torque max. ft./lbs 1115 1417
Nozzle contact force | retraction stroke max. tons | inch | |
Heating capacity | zones kW | |
Feed hopper lbs
Drive and connection
with injection unit 15.3 oz 15.3 oz
Net weight of machine lbs 29700
Sound press. level | Ref. only ⁴ dB(A)
Oil filling gal.
Drive power ² max. kW 45
Electrical connection ³ kW 68
Total A ---
Machine A 80 | 150
Heat A 60 | ---
Cooling water connection max. °F
min. Δp psi 22 | 1" 22 | 1"
Machine type
with EUROMAP size designation ¹
1500 T 280 tons 15.3 oz | 29.1 oz
2.4
2310
60 | --- ---
77 77
--- ---
80 | 150 ---
45 ---
71 ---
69 | 3 69 | 3
79.26 79.26
29.1 oz 29.1 oz
30800 ---
--- ---
2 pumps Accum.
19.90 8 22.90 8
650 1211
7.70 15.75 9.90 21.65
56 69
197 141
18.3 17.3
40.0 51.7
29000 29000
29000 29000
116.6 211.2
59.4 105.6
23.9 40.5
12.7 21.4
20 20
7.87 9.25
15.3 oz 29.1 oz
50 60
---
4.3 11.81
1100
4.95 6.89
59.06
180°
27.56 ---
15.75 ---
12.65 11.81
1500 T
280
TECHNICAL DATA | 1500 T
Upon request: other machine types and mold installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive.
1) Clamping force (tons) - Size of injection unit = max. stroke volume (cu. inch) x max. injection pressure (psi) 2) Specifications depend on the drive variant / drive configuration.3) Specifications relate to 230V/60 cycles | 460V/60 cycles.4) Emission sound pressure level at the workplace. Detailed information in the operating instructions.[ ] Specifications apply to alternative equipment.
DIN US
DIN
DIN US
DIN
US
US
7
EN-US 1500 T
Clamping unit
with clamping force max. tons
Opening force | stroke max. tons | inch |
Mold height, fixed | variable min. inch |
Platen daylight fixed | variable max. inch |
Table diameter inch
Angle of rotation, left/right
Rotation time for 180° min. s
Weight on rotary table max. lbs
Weight of movable mold half max. lbs
Ejector force | stroke max. tons | inch |
Dry cycle time EUROMAP ² 2 pumps min. s - inch -
Accum. min. s - inch
Injection unit
with screw diameter mm 55 70 60 80
Effective screw length L/D 22 17 23 17.5
Screw stroke max. inch
Calculated stroke volume max. cu. inch 34.0 55.1 48.3 85.8
Shot weight max. oz / PS 18.0 29.1 25.5 45.4
Material throughput max. lbs/h PS 189.2 253.0 275.0 385.0
max. lbs/h PA6.6 94.6 127.6 136.4 193.6
Injection pressure max. psi 34510 21315 36250 22185
Holding pressure max. psi 34510 21315 36250 22185
Injection flow ² 2 pumps max. cu. inch/s 14.5 23.7 13.7 24.4
Accum. max. cu. inch/s 43.6 70.5 69.1 122.7
Screw circumferential 2 pumps max. ft./min 131 167 141 190
speed ² Accum. max. ft./min 62 82 69 92
Screw torque max. ft./lbs 1115 1417 1580 1882
Nozzle contact force | retraction stroke max. tons | inch | |
Heating capacity | zones kW | |
Feed hopper lbs
Drive and connection
with injection unit 29.1 oz 29.1 oz
Net weight of machine lbs 30800
Sound press. level | Ref. only ⁴ dB(A)
Oil filling gal. 79.26
Drive power ² max. kW 45
Electrical connection ³ kW 71
Total A ---
Machine A 80 | 150
Heat A 60 | ---
Cooling water connection max. °F
min. Δp psi 22 | 1" 22 | 1"
Machine type
with EUROMAP size designation ¹
1500 T 355 tons 29.1 oz | 45.4 oz
2.4
2310
80 | --- ---
77 77
--- ---
90 | 200 ---
55 ---
89 ---
69 | 3 69 | 3
105.68 105.68
45.4 oz 45.4 oz
31900 ---
--- ---
2 pumps Accum.
22.90 8 31.40 8
1211 1846
9.90 21.65 12.10 23.62
69 82
141 167
17.3 18.7
51.7 93.9
29000 29000
29000 29000
211.2 319.0
105.6 162.8
40.5 65.8
21.4 34.7
20 20
9.25 11.02
29.1 oz 45.4 oz
60 70
---
4.3 11.81
1100
4.95 6.89
59.06
180°
27.56 ---
15.75 ---
12.65 11.81
1500 T
355
TECHNICAL DATA | 1500 T
Upon request: other machine types and mold installation heights, screws, drive powers etc. All specifications relate to the basic machine version. Deviations are possible depending on variants, process settings and material type. Depending on the drive, certain combinations, e.g. max. injection pressure and max. injection flow may be mutually exclusive.
1) Clamping force (tons) - Size of injection unit = max. stroke volume (cu. inch) x max. injection pressure (psi) 2) Specifications depend on the drive variant / drive configuration.3) Specifications relate to 230V/60 cycles | 460V/60 cycles.4) Emission sound pressure level at the workplace. Detailed information in the operating instructions.[ ] Specifications apply to alternative equipment.
DINUS
DIN
DINUS
DIN
US
US
8
max
.15.
7525.5
9
max
.23.
624.411)
3.541)m
in.9
.84
Y
27.5
6m
ax..
S
trok
e m
ax. 1
1.81
BA
(var
iabl
e)a
(adj
ust
to m
old
part
ing
line)
0.59
3.11
±0.
0079
Stro
ke m
ax.
0.67
0.39
4±
0.00
79
Ø0.67
Ø1.26
Ø2.36
Ø4.02+0.0118
0.39
Ø1.69
Ø3.23
Ø2.52
0.79
Ø3.54
Ø2.36 Ø2.561)
0.79
Ø4.331) Ø4.922)
Ø2.762)
a
40°
Mold ejector bolt
Mold Mounting surfaceØ
3.54
Ø3.
23
Ø4.
33
0.790.39
2.56Ø
1.69
Ø2.
52
Ø2.
36
c
b b40
°
6.89
c
a a
MOLD INSTALLATION DIMENSIONS UP TO 220 TONS | 1500 T
Counter bore in the mold (if required) | Y
1) Dimensions from centre of table (hindering edges of guard + safety gate)
2) Injection unit 8.2 oz3) Injection unit 15.3 oz
Injection unit 3.7 / 6.1 oz
Injection unit 3.7 / 6.1 oz
Injection unit 8.2 / 15.3 oz
Injection unit 8.2 / 15.3 oz
Thermoset execution
Horizontal version
a max.
Standard
Thermoset
Injection unit
3.7 / 6.1 oz 8.2 / 15.3 oz
1.38 1.97
0.59 1.97
a min.
a max.
b min.
c min.
Injection unit
3.7 / 6.1 oz 8.2 oz 15.3 oz
7.87 11.81 11.81
12.60 15.75 19.69
3.94 3.94 4.72
8.66 8.66 7.87
Ejector bolt
Counter bore in the mold (if required)
DIN US
DIN
DIN US
DIN
US
US
9
Ø59
.06
17
21
25
29
33
1315171921
4.72
29.9
2
Ø59.06
Ø33.86
Ø2.36 / Ø4.02+0,0188 - 0.59 deepfor hydraulic ejector
5/8-11 UNC - 1.22 deep
10
14
20
26
61014
32
20
4.921 ±0.0008
9.843 ±0.0008
Ø3.54
2x Ø0.63+0,0007 - 0,98 deep
5/8-11 UNC - 1.22 deep
2x Ø0.472+0,0007 - 0,79 deep
4.921 ±0.0008
16.54
68.11
9.843 ±0.0008
58.66
13.1
912
.99
33.4
6
16.1
4
Ø2.
362
)Ø
1.97
1)
1
2
38
Ø4 +0.0014
Ø5.19
7.32
*
4.72
MOLD INSTALLATION DIMENSIONS UP TO 220 TONS | 1500 T
Mold mounting platen rotary table | A
*Optional temperature control unit
1) Injection unit 3.7 oz / 6.1 oz2) Injection unit 8.2 oz / 15.3 oz
Moving mold mounting platen | B
Pos. 1 + 2 for 2 mold clamping positions
Usable mounting surface Mold grid dimensions 2-station mold
DINUS
DIN
DINUS
DIN
US
US
10
0.59
0.39
Ø2.52
Ø1.69
40°
Ø3.23
Ø4.92
Ø2.76
0.79
0.67
0.39
4 ±
0.00
79Ø0.67
Ø1.26
Ø2.36
Ø4.02 +0.0118
Stro
ke m
ax. 6
.89
3.11
±0.
0079
Mold ejector bolt
Mold Mounting surface
25.5
9
max
. 23.
62
max
. 27.
56
a (v
aria
ble)
(adj
ust
to m
old
part
ing
line)
Stro
ke m
ax. 1
1.81
Mid
dle
safe
ty g
ate
Prot
ectiv
e pa
nel
on r
otar
y ta
ble
max
. 15.
75m
in. 9
.84
4.41*
3.54*
Y
AB
a
40°
Ø3.
23
Ø1.
69
Ø2.
52
0.39
c
ba
MOLD INSTALLATION DIMENSIONS FROM 280 TONS | 1500 T
Ejector bolt
Counter bore in the mold (if required) | Y
a max.
Standard
Thermoset
Injection unit
15.3 oz
1.97
1.97
Injection unit 15.3 oz Injection unit 15.3 oz / 29.1 oz / 45.5 ozInjection unit 15.3 oz Thermoset execution
Horizontal version
a min.
a max.
b min.
c min.
Injection positions
for injection units
15.3 oz 29.1 oz 45.4
11.81 13.78 19.69
19.69 17.72 19.69
4.72 4.72 4.72
7.87 3.94 2.36
DIN US
DIN
DIN US
DIN
US
US
11
Ø59
.06
211915
33
17
29
25
21
4.724.72
7.32
*
10142026
29.9
2
Ø59.06
61014
3238
Ø33.86
Ø5.91
20
Ø2.36 / Ø4.02+0.0188 - 0.59 deepfor hydraulic ejector
5/8-11 UNC - 1.22 deep
14.9
612
.99
4.921 ±0.0008 4.921 ±0.0008
35.0
4
Ø4+0.0014
16.541)
72.83
9.843 ±0.00089.843 ±0.0008
Ø4.72
23.432)
16.5
4
59.45
2x Ø0.63+0.0007 -0.98 deep
5/8-11 UNC - 1.22 deep
2x Ø0.472+0.0007 - 0.79 deep
2x Ø2.952)
2x Ø2.361)
*Optional temperature control unit
Mold mounting platen rotary table | A
Usable mounting surface Mold grid dimensions 2-station mold
1) Injection unit 15.3 oz2) Injection unit 29.1 oz / Injection unit 45.4 oz
MOLD INSTALLATION DIMENSIONS FROM 280 TONS | 1500 T
Moving mold mounting platen | B
DINUS
DIN
DINUS
DIN
US
US
12
Injection units
Screw diameter inch
mm
Polystyrene max. oz PS
Styrene heteropolymerizates max. oz SB
max. oz SAN, ABS1)
Cellulose acetate max. oz CA1)
Celluloseacetobutyrate max. oz CAB1)
Polymethyl methacrylate max. oz PMMA
Polyphenylene oxide, mod. max. oz PPO
Polycarbonate max. oz PC
Polysulphone max. oz PSU
Polyamides max. oz PA 6.6 | PA 61)
max. oz PA 6.10 | PA 111)
Polyoximethylene (Polyacetal) max. oz POM
Polyethylene terephthalate max. oz PET
Polyethylene max. oz PE-LD
max. oz PE-HD
Polypropylene max. oz PP
Fluorpolymerides max. oz FEP, PFA, PCTFE1)
max. oz ETFE
Polyvinyl chloride max. oz PVC-U
max. oz PVC-P1)
1) average value
Theoretical shot weights for the most important materials
© 2021 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KGArthur-Hehl-Strasse
72290 LossburgTel.: +49 7446 33-0
www.arburg.comcontact@arburg.com
Injection units
Screw diameter inch
mm
Polystyrene max. oz PS
Styrene heteropolymerizates max. oz SB
max. oz SAN, ABS1)
Cellulose acetate max. oz CA1)
Celluloseacetobutyrate max. oz CAB1)
Polymethyl methacrylate max. oz PMMA
Polyphenylene oxide, mod. max. oz PPO
Polycarbonate max. oz PC
Polysulphone max. oz PSU
Polyamides max. oz PA 6.6 | PA 61)
max. oz PA 6.10 | PA 111)
Polyoximethylene (Polyacetal) max. oz POM
Polyethylene terephthalate max. oz PET
Polyethylene max. oz PE-LD
max. oz PE-HD
Polypropylene max. oz PP
Fluorpolymerides max. oz FEP, PFA, PCTFE1)
max. oz ETFE
Polyvinyl chloride max. oz PVC-U
max. oz PVC-P1)
1) average value
Theoretical shot weights for the most important materials
6.1 oz
1.18 1.38 1.57
30 35 40
3.4 4.6 6.1
3.3 4.6 5.9
3.2 4.4 5.8
3.8 5.2 6.8
3.6 4.9 6.4
3.5 4.8 6.3
3.2 4.3 5.6
3.6 4.9 6.4
3.7 5.0 6.6
3.4 4.6 6.0
3.2 4.3 5.6
4.2 5.8 7.5
4.1 5.5 7.2
2.6 3.5 4.6
2.7 3.6 4.7
2.7 3.7 4.8
5.5 7.4 9.7
4.8 6.5 8.5
4.1 5.6 7.3
3.8 5.2 6.8
29.1 oz
2.17 2.36 2.76
55 60 70
18.0 21.4 29.1
17.6 20.9 28.5
17.3 20.6 28.1
20.3 24.1 32.8
18.8 22.4 30.5
18.6 22.1 30.1
16.7 19.9 27.1
18.9 22.5 30.6
19.5 23.3 31.6
17.9 21.3 29.0
16.7 19.9 27.1
22.2 26.4 36.0
21.4 25.5 34.7
13.6 16.2 22.0
14.0 16.7 22.7
14.3 17.1 23.2
28.8 34.3 46.6
25.1 29.9 40.7
21.7 25.9 35.2
20.1 23.9 32.5
8.2 oz
1.38 1.57 1.77
35 40 45
5.0 6.5 8.2
4.8 6.3 8.0
4.8 6.2 7.9
5.6 7.3 9.2
5.2 6.8 8.6
5.1 6.7 8.5
4.6 6.0 7.6
5.2 6.8 8.6
5.4 7.0 8.9
4.9 6.5 8.2
4.6 6.0 7.6
6.1 8.0 10.1
5.9 7.7 9.8
3.7 4.9 6.2
3.9 5.0 6.4
4.0 5.2 6.5
7.9 10.4 13.1
6.9 9.0 11.4
6.0 7.8 9.9
5.5 7.2 9.2
45.4 oz
2.36 2.76 3.15
60 70 80
25.5 34.7 45.4
24.9 33.9 44.3
24.4 33.3 43.4
28.7 39.1 51.0
26.7 36.3 47.5
26.3 35.9 46.9
23.7 32.2 42.1
26.8 36.5 47.7
27.7 37.7 49.2
25.4 34.5 45.1
23.7 32.2 42.1
31.5 42.9 56.0
30.4 41.3 54.0
19.3 26.2 34.3
19.9 27.1 35.4
20.3 27.7 36.2
40.8 55.6 72.6
35.6 48.5 63.3
30.8 42.0 54.8
28.5 38.8 50.7
3.7 oz
0.98 1.18 1.38
25 30 35
1.9 2.7 3.7
1.9 2.7 3.6
1.8 2.6 3.6
2.1 3.1 4.2
2.0 2.9 3.9
2.0 2.8 3.8
1.8 2.5 3.5
2.0 2.9 3.9
2.1 3.0 4.0
1.9 2.7 3.7
1.7 2.5 3.4
2.3 3.4 4.6
2.3 3.3 4.4
1.4 2.1 2.8
1.5 2.1 2.9
1.5 2.2 3.0
3.0 4.4 6.0
2.7 3.8 5.2
2.3 3.3 4.5
2.1 3.1 4.2
15.3 oz
1.77 1.97 2.17
45 50 55
10.3 12.7 15.3
10.0 12.3 15.0
9.8 12.1 14.7
11.5 14.3 17.2
10.7 13.2 16.0
10.6 13.1 15.8
9.5 11.7 14.2
10.8 13.3 16.1
11.1 13.8 16.6
10.2 12.6 15.2
9.5 11.7 14.2
12.7 15.6 18.9
12.2 15.1 18.2
7.7 9.6 11.6
8.0 9.9 12.0
8.2 10.1 12.2
16.4 20.2 24.5
14.3 17.7 21.4
12.4 15.3 18.5
11.4 14.1 17.1
SHOT WEIGHTS | 1500 T
DIN US
DIN
DIN US
DIN
US
US
Injection units
Screw diameter inch
mm
Polystyrene max. oz PS
Styrene heteropolymerizates max. oz SB
max. oz SAN, ABS1)
Cellulose acetate max. oz CA1)
Celluloseacetobutyrate max. oz CAB1)
Polymethyl methacrylate max. oz PMMA
Polyphenylene oxide, mod. max. oz PPO
Polycarbonate max. oz PC
Polysulphone max. oz PSU
Polyamides max. oz PA 6.6 | PA 61)
max. oz PA 6.10 | PA 111)
Polyoximethylene (Polyacetal) max. oz POM
Polyethylene terephthalate max. oz PET
Polyethylene max. oz PE-LD
max. oz PE-HD
Polypropylene max. oz PP
Fluorpolymerides max. oz FEP, PFA, PCTFE1)
max. oz ETFE
Polyvinyl chloride max. oz PVC-U
max. oz PVC-P1)
1) average value
Theoretical shot weights for the most important materials
© 2021 ARBURG GmbH + Co KG | All data and technical information have been compiled with great care. However we accept no responsibility for correctness. Individual illustrations and information may deviate from the actual delivery condition of the machine. The relevant valid operating instructions are applicable for the installation and operation of the machine.
ARBURG GmbH + Co KGArthur-Hehl-Strasse
72290 LossburgTel.: +49 7446 33-0
www.arburg.comcontact@arburg.com 68
0530
_EN
_US_
0320
21 ·
Subj
ect
to a
ltera
tions
top related