altair radioss(tm) – 2019 version - features...

ALTAIR RADIOSS(TM) – 2019 VERSION - FEATURES UPDATE한국알테어김원택 2019.7.11

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

OVERVIEW OF THE MAJOR FEATURES

Altair�Radioss™�2019�포함 내용 :

• finite�volume�formulation�과 solver�를 이용한신 ALE�multi-material�law

• 신 boundary�element�method�을 사용한수상폭발해석기능

• State�file에 model의 모든 node와 part를 작성하는신기능

• 향상된 contact�interfaces�TYPE24�and�TYPE25�(options,�performances)

• 하나의 contact�정의에 Part�마다 여러마찰조건들을정의할수있게하는신마찰정의

• 동일한형식과 unit일 경우 SUBMODEL�안에 새로운 SIBMODEL을 정의

이밖에도많은개선사항..

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

• /MAT/LAW151�(MULTIFLUID)• Available�for�:

• 2D�analysis�with�/TRIA�and�/QUAD�elements• 3D�analysis�with�/BRICK�and�/TETRA4�elements

• Simple�input• Sub�material�LAW5�or�LAW6�identifier�and�volume�fraction

• Compatible�with�• Initial�volume�fraction�/INIVOL• /ALE/MUSCL• FSI�Contact�interface�/INTER/TYPE1�and�/INTER/TYPE18• Fluid�material�only�(will�be�extended�to�elasto-plastic�material)

• Dedicated�for�application�with�high�Mach�number

Richtmyer-Meshkov Instability

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

/MAT/LAW5 (explo)1,0721

1001 0,0

/MAT/LAW6 (air)

Examplefor blast modeling

Mat.id

Vol. frac.

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

• /MAT/LAW151�(MULTIFLUID)• Available�for�:

• 2D�analysis�with�/TRIA�and�/QUAD�elements• 3D�analysis�with�/BRICK�and�/TETRA4�elements

• Simple�input• Sub�material�LAW5�or�LAW6�identifier�and�volume�fraction

• Compatible�with�• Initial�volume�fraction�/INIVOL• /ALE/MUSCL• FSI�Contact�interface�/INTER/TYPE1�and�/INTER/TYPE18• Fluid�material�only�(will�be�extended�to�elasto-plastic�material)

• Dedicated�for�application�with�high�Mach�number

Richtmyer-Meshkov Instability

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

• /INIVEL/FVM�:�• New�option�to�define�initial�velocity�in�the�parts�defined�with�/MAT/LAW151�

• /EBCS/FLUXOUT�:�• New�non-reflecting�outlet�boundary�condition�for�material�/MAT/LAW151

• /EBCS/INLET�:�• New�inlet�boundary�condition�for�material�/MAT/LAW151

Surface to initial volume fraction

non-reflecting outlet boundary condition

Closed outlet condition on free surface (by default)

Material with low density

Material with high density

Initial velocity on the fluid

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

• /INIMAP1D�:�Map�1D�velocities�and�thermodynamic�values�into�2D�or�3D�space�by�using�spherical,�cylindrical�or�planar�mapping�methods.

• Option�VE�:�map�density,�energy�+�velocity• Option�VP�:�map�density,�pressure�+�velocity

0x0x

50 x 50 x 50 cubic mesh

50 x 50 x 50 cubic mesh

1x

0x 0x

1D to 3D cylindrical mapping

1D to 3D spherical mapping

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW ALE MULTI-MATERIAL LAW USING FINITE VOLUME SOLVER

• /INIMAP2D�:�Map�2D�velocity�and�thermodynamic�values�into�a�3D�axi-symmetric�space

• /FUNC_2D�:�Function�to�define�a�scalar�value,�or�a�vector�value�defined�on�a�subset�of�R²

Mapping results on the 3D mesh2D function to map

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

NEW FEATURES TO SIMULATE UNDER WATER EXPLOSION USING BEM

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

UNDER WATER EXPLOSION SIMULATION USING BEM

• /BEM/DAA�:�Doubly�Asymptotic�Approximation�for�Under�water�Explosion�by�Boundary�Elements�Method�(BEM)

• Option�to�compute�the�pressure�on�the�wet�surface�of�structure�coming�from�under�water�explosion

• The�pressure�is�computed�using�Boundary�Elements�Method

Wet surface

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

UNDER WATER EXPLOSION SIMULATION USING BEM

• /BEM/FLOW�:�Incompressible�Fluid�Flow�computation�by�Boundary�Elements�Method• Model�incompressible�fluid�flow�around�or�inside�close�surface• Node�can�be�used�to�display�the�fluid�velocity• Inlet�and�outlet�condition�are�available.

Air flow around a sphereAir flow inside a pipe

InletOutlet

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MATERIAL AND FAILURE MODELS

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MATERIAL AND FAILURE MODELS

• /MAT/LAW87�:�material�based�on�Barlat�Yld2000�formulation�for�shell�elements• New�flag�Ifit=1�to�be�able�to�enter�directly�Lankford�parameters�0°,�45°,�90° direction�and�biaxial�loading.

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|/MAT/LAW87/3/1ALU# RHO_I

2.7E-3 0# E Nu IFlag VP coeff_c exp_p

70000 0.3 1# sig00 sig45 sig90 sigb I_fit

133.179899 133.102756 132.330693 162.330301 1# r00 r45 r90 rb

0.703242569 0.486264221 0.865336191 0.546807587#empty line

# exp_a ALPHA NEXP Fcut Fsmooth NRATE8 0.55 0.21 1 0

# ASWIFT EPSO QVOCE BETA KO415. 0.00220 174.7 11.19 132.4

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MATERIAL AND FAILURE MODELS

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

CONTACT INTERFACE

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

CONTACT INTERFACE

• /INTER/TYPE2�(tied�contact)�• Improvement�for�tied�contact�with�Spotflag=27�and�Spotflag=28�for�the�different�situation�found�in�the�electronic�market�(solid,�shell,�skin�shell,…)

Description Spotflag0 Spotflag1 Spotflag25 Spotflag27 Spotflag28noaddedmassatt=0noaddedmassduringtherunCompatibilitywithotherkin.conditions

models with solids

Description Spotflag0 Spotflag1 Spotflag25 Spotflag27 Spotflag28transfer6DOF(drillingforshells)noaddedmassatt=0noaddedmassduringtherunCompatibilitywithotherkin.conditions

models with shells

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

CONTACT INTERFACE

• /INTER/TYPE24�(surface�to�surface�contact)�• Improvement�of�the�CPU�cost�for�specific�models.• Improvement�of�the�edge�to�edge�behavior�(Iedge=1)�for�double�and�single�precision�versions.�• New�flag�Irem_i2=1 for�deactivating�the�slave�nodes�if�the�same�contact�pair�(node/segment)�has�been�defined�in�a�TYPE2�interface.

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

CONTACT INTERFACE

• /INTER/TYPE25�(node�to�surface�contact)�• Improvement�of�the�CPU�cost�and�restart�file�size.• New�feature�Igap=2�to�avoid�self-impact�within�the�same�shell�part�in�case�the�thickness�is�bigger�than�mesh�size.�

• New�feature�Igap=3�to�reduce�the�contact�gap�for�shell�parts�based�on�mesh�size�(%mesh_size).�

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

CONTACT INTERFACE : FRICTION SETTING

• /FRICTION• Define�different�contact�friction�coefficient�between�set�of�parts�or�couple�of�parts

• The�friction�model�can�be�applied�to�multiple�contact�interfaces�TYPE7,�11,�19,�24�and�25.

• Several�friction�cards�can�be�defined�in�the�model.

Contact 1

Contact 1

Fric=0.1

Fric=0.2 Fric=0.4 Fric=0.3 Fric=0.1

#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|/FRICTION/999test no 1# Ifric Ifiltr Xfreq Iform

0 0 0 2# C1 C2 C3 C4 C5

0 0 0 0 0# C6 Fric VisF

0 .2 0#GRpartID1 GRpartID2 PartID_1 PartID_2

111 222 0 0 # C1 C2 C3 C4 C5

0 0 0 0 0# C6 Fric VisF

0 .1 0#GRpartID1 GRpartID2 PartID_1 PartID_2

0 0 1 3 # C1 C2 C3 C4 C5

0 0 0 0 0# C6 Fric VisF

0 .2 0…#---1----|----2----|----3----|----4----|----5----|----6----|----7----|----8----|----9----|---10----|

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MISCELLANEOUS ENHANCEMENT

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MISCELLANEOUS ENHANCEMENT

• //SUBMODEL�:�new�capabilities�to�defined�a�submodel inside�a�submodel• A�submodel can�be�defined�inside�a�submodel.

• The�model�should�be�written�in�the�same�version�as�the�solver�(no�version�translation)• The�unit�option�in�the�//SUBMODEL�card�can�not�be�used• The�version�option�in�the�//SUBMODEL�card�can�not�be�used

• Corrections�on�the�submodel option• Several�compatibility�issues�with�submodels has�been�fixed�(user�material�laws,�group�of�element�defined�by�box,�spring�type�13�and�type�45,�reference�metric…)

• Better�support�of�the�following�options�in�a�submodel :�/SURF/SUBSET,�SPHCEL�,�EREF,�AIRBAG1,�COMMU1• The�options�/MAT/LAW73,�/CONVEC,�/SPHGLO,�/SPHBCS,�/GAUGE/SPH,�/TH/SPHCEL�are�now�compatible�with�SUBMODEL.

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MISCELLANEOUS ENHANCEMENT

/THERMAL

• Option�is�now�available�for�smooth�particle�hydrodynamic�(SPH)

/SKEW/MOV�and�/FRAME/MOV

• New�option�Dir�to�define�the�direction�of�the�axis�defined�by�nodes�N1�and�N2

/ACTIV

• New�option�Tstop�is�available�for�Iform=2�formulation.

/H3D�output�options

The�output�of�the�/RBE2�was�missing�in�the�.h3d�file

Eroded�tetrahedron�elements�are�now�correctly�shown�in�the�.h3d�file.

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

MISCELLANEOUS ENHANCEMENT

/TH/INTER

• Tangential�force�is�now�available�for�the�drawbeads contact�interface�/INTER/TYPE8

/DT1TET10

• Gives�more�robust�computation�for�time�step�for�10-node�tetrahedral�/TETRA10.�This�time�step�estimation�is�generally�lower�than�the�standard�one,�but�may�solve�instability�problems.

/REPORT/HTML

• New�option�to�create�html�report�about�the�global�parameters�of�the�model�and�a�global�summary�of�the�results�and�to�create�an�.mvw file.

July 11, 2019 Altair Engineering, Inc. Proprietary and Confidential. All rights reserved.©

Thank you for your attention !