angle grindersflex angle grinders keyang angle grinders bosch angle grinders … · 2018. 6....
Post on 26-Sep-2020
20 Views
Preview:
TRANSCRIPT
Angle grinders Fein
Angle grindersFlex
Angle grinders Keyang
Angle grinders Bosch
Angle grinders Makita
Cordless Angle Grinders
Flex angle grinders 230V 50/60Hz
Number Diameter Watt Type
54FL0576 115mm 800 L8-11 115
11.500 rpm
High performance angle grinder.
Optimizedcooling system.
Excellent protection against dust.
Tool-free adjustment of the safety guard.
Restart protection after power failure.
Number Diameter Watt Type
54FL0577 125mm 800 L3709-125
11.500 rpm
Lightweight and ergonomical design.
Excellent protection against dust.
Tool-free adjustment of the safety guard.
For light duty grinding applications.
Number Diameter Watt Type
54FL0578 125mm 800 L8-11 125
11.500 rpm
High performance angle grinder.
Optimizedcooling system.
Excellent protection against dust.
Tool-free adjustment of the safety guard.
Restart protection after power failure.
Number Diameter Watt Type
54FL0579 125mm 900 LE-9-10-125
6.000-11.500 rpm
Constant speed control, soft start.
Restart protection after power failure.
Overload protection and temperature control.
Double winding protection from metal dust.
Kickback stop. Shuts down motor when disc blocks
Tool-free adjustment of the safety guard.
Number Diameter Watt Type
B54FL0579B 125mm 900 LE-9-10-125
Complete with carrybox.
Number Diameter Watt Type
54FL0580 125mm 1010 L10-10-125
11.500 rpm
3-fold winding protection against metal dust
reduces motor wear and increases service
life. Epoxy coated winding on the field coil.
Compact ergonomic design, snug fit in the hand
Tool-free adjustment of the safety guard.
Pag. 54/01
Number Diameter Watt Type
54FL0581 125mm 1400 LE 14-7 125 INOX
2.100-7.500 rpm
Specialist for stainless steel and steel alloys.
Max. diameter polishing tool 160mm
Special gear ratio for high torque in medium
and low speed range. Prevent blue discolouration
and distortion due to heat developement.
Completely cast electronic components
prevent damage due to metal dust.
Tool-free adjustment of the safety guard.
SoftVib side handle.
Patented locknut wrench.
Number Diameter Watt Type
54FL0589 125mm 1200 L 1506 VR
2.200 - 6.800 rpm
FR-microprocessor-control. Tachogenerator,
constant speed control, soft start, restart
protection after power failure.
Highly efficient and resilient motor for more
power output.
Very suitable for fine grinding and surface
treatment. SoftViv side handle.
Tool-free adjustment of the safety guard.
Also available in 110V
Number Diameter Watt Type
54FL0590 125mm 1400 L 3406 VRG
2.100 - 7.500 rpm
VR-microprocessor-control. Tachogenerator,
constant speed control, soft start, restart
protection after power failure.
Highly efficient and resilient motor for more
power output. SoftVib side handle.
Switch with on/off lock.
Tool-free adjustment of the safety guard.
Also available in 110V
Number Diameter Watt Type
54FL0583 125mm 1400 L 14-11-125
11.500 rpm
FR-microprocessor-control. Tachogenerator,
constant speed control, soft start, restart
protection after power failure.
Highly efficient and resilient motor for more
power output. Anti-Kickback safety
Tool-free adjustment of the safety guard.
SoftVib side handle. Weight 2,4 kg
Tool-free adjustment of the safety guard.
2-component side handle adjustble in
3 positions.
Nummer Diameter Watt Type
54FL0584 125mm 1400 LE 14-11 125
2.800 - 11.500 rpm.
Same as L 14-11 125 but with
adjustable speed control
Number Description
55FL452572 Special dust cap for 125mm angle grinder
When using a 125mm diamond disc a 1400W
angle grinder is recommended.
Fits on the Flex industrial safety vacuum
cleaners.
54-01.1
Nummer Diameter Watt Type
54FL0622 150mm 1500 L 15-10 150
10.000 rpm.
FR-microprocessor control.
Restart protection after power failure.
Temperature controle and CDC electronic
for constant speed during grinding.
Highly effecient and resilient powerful motor.
Extra dust protect of motor and gear.
Anti-Kickback safety control.
Tool-free adjustment of the safety guard.
Soft inlay in the handle for safe control
and is ergonomic.
For continuously use.
Weight 3,6 kilo
Number Diameter Watt Type
54FL0653 180mm 2100 L 21-8 180
8.300 rpm
Robust motor housing and gearbox housing.
Ergonomically machine.
Reduced vibrations due to special design.
SoftVib side handle. 2-component rear shaft
handle reduce vibrations.
Restart protection after power failure.
Tool-free adjustment of the safety guard.
Softstart prevent power overloading to
Lock on / lock off switch.
Number Diameter Watt Type
54FL0654 230mm 2100 L 21-6 230
6.500 rpm
Robust motor housing and gearbox housing.
Ergonomically machine.
Reduced vibrations due to special design.
SoftVib side handle. 2-component rear shaft
handle reduce vibrations.
Restart protection after power failure.
Tool-free adjustment of the safety guard.
Softstart prevent power overloading to
Lock on / lock off switch.
Number Diameter Watt Type
54FL0655 230mm 2400 L 24-6 230
6.500 rpm
Robust motor housing and gearbox housing.
Ergonomically machine.
Reduced vibrations due to special design.
SoftVib side handle. 2-component rear shaft
handle reduce vibrations.
Restart protection after power failure.
Tool-free adjustment of the safety guard.
Softstart prevent power overloading to
Lock on / lock off switch.
Number Diameter Watt Type
54FL0656 230mm 2600 L 26-6 230
6.500 rpm
Robust motor housing and gearbox housing.
Ergonomically machine. 90˚ adjustable handle
Reduced vibrations due to special design.
SoftVib side handle. 2-component rear shaft
handle reduce vibrations.
Restart protection after power failure.
Tool-free adjustment of the safety guard.
Softstart prevent power overloading to
Lock on / lock off switch. 54-01.2
Fein Angle Grinders 230V 50/60Hz
Number Diameter Watt Type
560300 115mm 800 WSG 8-115
11.000 rpm
The lightest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
The best vibration performance in its class.
Number Diameter Watt Type
560302 125mm 1100 WSG 11-125RT
11.000 rpm
The lightest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
The best vibration performance in its class.
Fein ErgoGrip - unique ergonomic concept
for fatique-free working.
Safety hood and anti twist protection.
Dead man's switch for extra safety
Stops machine immediately when the
switch is released.
Number Diameter Watt Type
560303 125mm 1100 WSG 11-125
11.000 rpm
The lightest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
Number Diameter Watt Type
560304 125mm 1200 WSG 12-125P
11.000 rpm
The lightest and shortest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
POWERTRONIC for enormous power, power
reserve and exeptional speed stability
under load. Kickback stop. Restart protection
Soft start and electronic overload protection.
The best vibration performance in its class.
Number Diameter Watt Type
560306 125mm 1500 WSG 15-125PR
11.000 rpm
The lightest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
The best vibration performance in its class.
Fein ErgoGrip - unique ergonomic concept
for fatique-free working.
Safety hood and anti twist protection.
560306B 125mm 1500 WSG 15-125PRT
Same as WSG 15-125PR but than
with AutoStop dead man's switch.
54-01.3
Number Diameter Watt Type
560309 125mm 1500 WSG 15-125P
11.000 rpm
The lightest and shortest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
POWERTRONIC for enormous power, power
reserve and exeptional speed stability
under load. Kickback stop. Restart protection
Soft start and electronic overload protection.
The best vibration performance in its class.
Number Diameter Watt Type
560310 150mm 1700 WSG 17-150P
8.500 rpm
The lightest and shortest model of its kind.
Carbon brushes last up to 30% longer
and tool removes more material than
comparable angle grinders.
POWERTRONIC for enormous power, power
reserve and exeptional speed stability
under load. Kickback stop. Restart protection
Soft start and electronic overload protection.
The best vibration performance in its class.
Number Diameter Watt Type
560330 150mm 1700 WSG 17-150PR
8.500 rpm
New ergonomic design for continuously
working without fartigue.
POWERTRONIC for enormous power, power
reserve and exeptional speed stability
under load. Kickback stop. Restart protection
Soft start and electronic overload protection.
The best vibration performance in its class.
The lowest weight in it's class.
Weight 2,6 kilo
560331 150mm 1700 WSG 17-150PR
Same as the WSG 17-150PR but equipped with
with AutoStop dead man's switch.
Number Diameter Watt Type
560313 180mm 2000 WSB 20-180
8.500 rpm
Fein Tool-Free QuickIn clamping system.
High power motor, effective material removal
over entire operating range.
Electronic brake system (EBS). Restart lock,
soft start. Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560313B 180mm 2000 WSB 20-180 (AS)
Same as 560313 but with Auto Stop
(with dead man's switch) for maximum safety
Number Diameter Watt Type
560314 180mm 2000 WSG 20-180
8.500 rpm
Flat drive head allows the tool to be plunged
into workpieces. Seales electronic parts.
Restart lock, soft start.
Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560314B 180mm 2000 WSG 20-180 (AS)
Same as 560314 but with Auto Stop
(with dead man's switch) for maximum safety 54-01.4
Number Diameter Watt Type
560315 180mm 2500 WSB 25-180X
8.500 rpm. Softstart.
Fein Tool-Free QuickIn clamping system.
High power motor, effective material removal
over entire operating range.
Electronic brake system (EBS). Restart lock,
soft start. Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560315B 180mm 2500 WSB 25-180X (AS)
Same as 560315 but with Auto Stop
(with dead man's switch) for maximum safety
Number Diameter Watt Type
560316 180mm 2500 WSG 25-180
8.500 rpm
Flat drive head allows the tool to be plunged
into workpieces. Seales electronic parts.
Restart lock, soft start.
Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560316B 180mm 2500 WSG 25-180 (AS)
Same as 560316 but with Auto Stop
(with dead man's switch) for maximum safety
Number Diameter Watt Type
560317 230mm 2000 WSB 20-230
6.600 rpm. Softstart.
Fein Tool-Free QuickIn clamping system.
High power motor, effective material removal
over entire operating range.
Electronic brake system (EBS). Restart lock,
soft start. Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560317B 230mm 2000 WSB 20-230 (AS)
Same as 560317 but with Auto Stop
(with dead man's switch) for maximum safety
Number Diameter Watt Type
560318 230mm 2000 WSG 20-230
6.600 rpm
Flat drive head allows the tool to be plunged
into workpieces. Seales electronic parts.
Restart lock, soft start.
Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560318B 230mm 2000 WSG 20-230 (AS)
Same as 560318 but with Auto Stop
(with dead man's switch) for maximum safety
Nummer Diameter Watt Type
560320 230mm 2500 WSB 25-230X
6.600 rpm. Softstart.
Fein Tool-Free QuickIn clamping system.
High power motor, effective material removal
over entire operating range.
Electronic brake system (EBS). Restart lock,
soft start. Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560320B 230mm 2500 WSB 25-230X (AS)
Same as 560320 but with Auto Stop
(with dead man's switch) for maximum safety 54-01.5
Nummer Diameter Watt Type
560319 230mm 2500 WSG 25-230
6.600 rpm
Flat drive head allows the tool to be plunged
into workpieces. Seales electronic parts.
Restart lock, soft start.
Rear handle can be rotated through
4-positions. Self cut-off carbon brushes.
560319B 230mm 2500 WSG 25-230 (AS)
Same as 560319 but with Auto Stop
(with dead man's switch) for maximum safety
Pferd Angle Grinders 230V 50/60Hz
Number Diameter Watt Type
54PF1950 115mm 1750 UWER 18/120 SI
2.800-11.500 rpm
Adjustable speed control
Extreme powerful for conitunuously use.
Overload protection. Anti-Kick back safety
Restart protection at power failure.
Anti-vibration side handle against dead finger
syndrome. Softstart.
Keyless tool nut.
Number Diameter Watt Type
54PF1951 125mm 1750 UWER 18/110 SI
2.700-11.000 rpm
Adjustable speed control
Extreme powerful for conitunuously use.
Overload protection. Anti-Kick back safety
Restart protection at power failure.
Anti-vibration side handle against dead finger
syndrome. Softstart.
Keyless tool nut.
Pferd Edge Finish
Number Watt Type
54PF1955 1750 UWER 18/110 EF-R3/45° TK
Complete with carbide cutting inserts 45°
For edge rounding.
Removing sharp parts and rounding of edges
on medium large side tools trough tungsten
carbide cutting inserts.
Chamfering of 30° and 45° defined corners with
a defined radius of 3.0mm.
Chamfer height adjustable from 1 to 6 mm.
According to ISO 12944-3, ISO 8501-3 and
SOLAS XII/6.3 (Ref. T4/3.01 MSC. 1/Circ 1198)
Adjustable speed 2.750-11.000 rpm.
Recommeded speed 7.100-8.700 rpm.
Number Watt Type
54PF1956 1750 UWER 18/110 EF-30° TK
Complete with carbide cutting inserts 30°
Rest same specs as 54PF1955
Number Watt Type
54PF1957 1750 UWER 18/110 EF
Machine without cutting inserts
Rest same specs as 54PF1955
54-01.6
Keyang Angle Grinders
Number Diameter Watt Type
54K1070 125mm 850 DG852
11.000 rpm.
Constant speed. Pop off brushes.
Direct cooling for high overload capability
and long lifetime. Good handling thanks to
slim housing.
Weight 1,6 kg.
Number Diameter Watt Type
54K1071 125mm 1100 DG1102C
11.000 rpm.
Constant speed. Pop off brushes.
Direct cooling for high overload capability
and long lifetime. Good handling thanks to
slim housing. Weight 1,6 kg.
Number Diameter Watt Type
54K1072 125mm 1400 DG1400A
11.000 rpm.
Constant speed. Pop off brushes.
Direct cooling for high overload capability
and long lifetime.
Overload- and restart protection.
Anti-vibration side handle.
Gear head 90-degree rotatable.
Weight 1,8 kilo
Number Diameter Watt Type
54K1073 125mm 1400 DG1400V
2.800 - 11.000 rpm.
Same as the DG1400A but with an
adjustable speed control.
Weight 1,8 kilo
Number Diameter Watt Type
54K1074 230mm 2200 DG230-22
6.500 rpm.
Soft start. Soft grip. Restart protection at
power failure.
Anti-vibration handle.
Direct cooling for high overload capability
and long lifetime.
Weight 5,5 kilo
Number Diameter Watt Type
54K1075 230mm 2400 DG924AVT
Soft start. Soft grip. Restart protection at
power failure.
Anti-vibration handle.
Handle 2x 90 degrees adjustable.
Direct cooling for high overload capability
vermogen en lange levensduur.
Weight 4,9 kilo
54-01.7
Bosch angle grinders 230V 50/60Hz
Number Diameter Watt Type
54BO0336 115mm 720 GWS 7-115 Prof
11.000 rpm
Compact machine for light duty
grinding jobs.
Number Diameter Watt Type
54BO0351 125mm 900 GWS 9-125 Prof
11.500 rpm
Powerfull compact angle grinder.
Ergonomic design.
Gear head in 90° staps adjustable.
Number Diameter Watt Type
54BO0352 125mm 900 GWS 9-125 P Prof
11.500 rpm
PROtection series angle grinder.
Direct power of when releasing the machine
for added security.
Direct motor cooling for a longer lifetime.
Ergonomic design.
Gear head in 90° staps adjustable.
Number Diameter Watt Type
54BO0365 150mm 1500 GWS 9-150 P Prof
9.300 rpm
PROtection series angle grinder.
Direct power of when releasing the machine
for added security.
Direct motor cooling for a longer lifetime.
Ergonomic design.
Gear head in 90° staps adjustable.
Vibration control up to 40% lower vibrations.
Kickback stop and soft start.
Number Diameter Watt Type
54BO0375 180mm 2200 GWS 22-180 LVI Prof
8.500 rpm
Light weight angle grinder.
Rear handle and side handle with vibration
control up to 50% less vibrations.
Kickback stop and soft start.
Restart protection at power failure.
SoftGrip for more comfortable operation
of the machine.
Armored coils for better protection against
abrasive dust.
Number Diameter Watt Type
54BO0382 230mm 2000 GWS 20-230 H Prof
6.600 rpm
Armored coils for better protection against
abrasive dust.
Compact and light weigth grinding machine
for all common grinding jobs.
54-01.8
Number Diameter Watt Type
54BO0383 230mm 2200 GWS 22-230 H Prof
6.600 rpm
Armored coils for better protection against
abrasive dust.
Compact and light weigth grinding machine
for all common grinding jobs.
Exeptional robust transmission.
For heavy duty applications.
PROtection series angle grinder.
Direct power of when releasing the machine
for added security.
Number Diameter Watt Type
54BO0391 230mm 2400 GWS 24-230 JH Prof
6.600 rpm
Armored coils for better protection against
abrasive dust.
Compact and light weigth grinding machine
for all common grinding jobs.
Exeptional robust transmission.
For heavy duty applications.
Soft start. Restart protection in case
of power failure.
Number Diameter Watt Type
54BO0395 230mm 2600 GWS 26-230 LVI Prof
6.600 rpm
Light weight angle grinder.
Rear handle and side handle with vibration
control up to 40% less vibrations.
Soft start and kick back stop for direct
switch off.
Restart protection in case of power failure.
SoftGrip for more comfortable operation
of the machine.
Armored coils for better protection against
abrasive dust.
Adjustable rear handle for optimal en
comfortable grinding.
SDS quick connecting tool nut.
Makita angle grinders 230V 50Hz
Number Diameter Watt Type
540125 125mm 840 9558HNGKD2
11.000 rpm.
With sheet metal carry case and set of
accessories.
Ideal for cutting tiles and stone grinding.
Number Diameter Watt Type
540124 125mm 1400 9565CVR
11.000 rpm.
SJS motor protection.
Kickback stop.
Adjustable speed
Number Diameter Watt Type
540122 125mm 1400 GA5040C
11.000 rpm.
SJS motor protection.
Kickback stop.
Extremely low vibration level by SJSII
54-01.9
Cordless Angle Grinder Keyang
Number Diameter Voltage Type
54K1080 125mm 18V DG18BL125S
8.500 rpm.
Brushless motor
Overload protection
Restart protection
Soft start
Accu indicator
Rapid charger 50 minutes
Weight with battery 3,0 kilo
Complete with plastic carry case,
Rapid charger (50 minutes),
2 pieces Li-ion batteries 18V 5,0 Ah.
54K1081 125mm 18V DG18BL125S-BODY
Body only
Cordless Angle Grinder Flex
Number Diameter Voltage Type
54FL0660 125mm 18V L125 18.0-EC/5.0set
8.500 rpm
Voltage battery 18.0V 5.0Ah
Electronic Management System (EMS),
protects machine for a longer service life and
higher efficiency. Motor without carbon brush
Soft start, motor protection.
Protection against metal dust.
Tool-free adjustment of the safety guard.
Complete with 2 batteries, charger and
L-BOXX®
54FL0661 125mm 18V L 125 18.0-EC
Body only
Cordless Angle Grinder Bosch Professional
Number Diameter Watt Type
54BO0398 125mm n.v.t. GWS 18-125 V-Li Prof
Battery angle grinder 18V 4,0Ah
10.000 rpm
Extreme resilent 4-pole high power
motor.
Compact construction and a low weight
2,3 kilo. Exelent weight balance.
Innovative CoolPack batteries.
ECP protects battery against overload,
overheating and deep discharging.
EMP protects motor.
Charge indicator. No memory effect.
Batteries can be charged at any time
without negative effect on the lifetime.
Complete with L-Boxx, 2 batteries and quick charger
type AL 1860CV
54BO0399 125mm n.v.t. GWS 18-125 V-Li Prof
Battery angle grinder 18V 5,0Ah
As 54BO0398 but higher capacity batteries.
54BO0400 125mm n.v.t. GWS 18-125 V-Li Prof
As 54BO0398 but without batteries, quick charger
and L-Boxx.
Number Description
456010 Quick connection tool nut No-Key
For fast and easy tool changing.
Connection M14
54-01.10
Cordless Angle Grinder Fein
Number Diameter Voltage
54F71200161000 115mm 18V
Type CCG 18-115 BL
Brushless Fein PowerDrive motor.
Totally enclosed motor housing protects the
motor from aggressive ceramic and mineral
dust.
2.500-8.500 rpm.
Battery capacity 18V 5,2 ah
Weight with battery 2,7 kilo
Supplied with 2 pcs battery 5,2 Ah
Li-ion and rapid charger ALG50.
Incl. wheelguard, tool-free quick clamping nut,
anti-vibration side handle, plastic
carry case.
Bright working area thanks to integrated LED light.
Can be operated with all Fein Li-ion batteries (12 to 18V)
SafetyCell Technologie protects battery
and tool form overload, overheating and
total discharge.
54F71200162000 115mm 18V
Type CCG 18-115 BL SELECT
Body only
Number Diameter Voltage
54F71200261000 125mm 18V
Type CCG 18-125 BL
Rest of the specs. as CCG 18-115 BL
54F71200262000 115mm 18V
Type CCG 18-125 BL SELECT
Body only
Number Diameter Voltage
54F71200361000 115mm 18V
Type CCG 18-115 BLPD
Brushless Fein PowerDrive motor.
Totally enclosed motor housing protects the
motor from aggressive ceramic and mineral
dust.
2.500-8.500 rpm.
Battery capacity 18V 5,2 ah
Weight with battery 2,7 kilo
Supplied with 2 pcs battery 5,2 Ah
Li-ion and rapid charger ALG50.
Incl. wheelguard, tool-free quick clamping nut,
anti-vibration side handle, plastic
carry case.
Bright working area thanks to integrated LED light.
Can be operated with all Fein Li-ion batteries (12 to 18V)
SafetyCell Technologie protects battery
and tool form overload, overheating and
total discharge.
Equipped with dead man's switch which
stopt the machine immediately when the
switch is released.
54F71200362000 115mm 18V
Type CCG 18-115 BLPD SELECT
Body only
Nummer Diameter Voltage
54F71200461000 125mm 18V
Type CCG 18-125 BLPD
Rest of the specs. as CCG 18-115 BLPD
54F71200462000 125mm 18V
Type CCG 18-125 BLPD SELECT
Body only
54-01.11
top related