anode repair solution - subc · pdf fileanode repair solution the solution is developed to...
Post on 06-Feb-2018
249 Views
Preview:
TRANSCRIPT
Anode Repair Solution
THE SOLUTION IS DEVELOPED TO REPAIR YOUR CATHODIC PROTECTION
FOR YOUR SUBMERGED STRUCTURES. FOCUSING ON THE LOWEST
COST AND HIGHEST SAFETY LEVEL. THE SOLUTION SUBSTITUTES EX-
PENSIVE ALTERNATIVE TECHNICAL SOLUTIONS AND DIVING OPERA-
TIONS.
Sectors
Offshore Wind, Oil & Gas and
Maritime
Field of application
Jackets, Mono-piles, Hulls,
Ships, Semi-submersibles,
etc.
Type of anodes
All types of surface mounted
and welded sacrificial anodes
Contact:
subsea@subcpartner.com
SubC Partner A/S
Subsea Engineering
Tvaerkaj 2
6700 Esbjerg
Denmark
www.subcpartner.com
Tel: +45 7023 2122
How it works
In closed position the
clamp is safe and self
locking.
The clamp can open
and close using the
over-centre acting
knee joint
The locked clamp en-
sure mechanical and
electrical connection.
Scope of supply
- Proposal for your anode repair solution (free of charge).
- Engineering and design of your anode repair solution.
- Anodes including clamps fitted for all types of passive anodes.
- Bespoken subsea installation clamping tools for the actual anodes.
- Topside control hardware and software.
- ROV manipulator setup (optional).
- Offshore installation (optional)
Design
The anodes and clamps are designed for the world
most extreme conditions according DNV/GL for the
North Atlantic area, in compliance with the codes:
- DNV-OS-C101
- DNV-RP-C205
- DNV-RP-B401
In addition any client required codes will be included
in the certificate of conformity of each supplied type of
anode and clamp.
The patent rights belong to SubC Partner A/S.
Safety
Each type of clamp is tested for 10 years full scale
load cycles; corresponding to more than 36 million
loads cycles.
The actual loads and electrical resistance are record-
ed and verified for each load.
The electrical resistance is verified to be below 100
mΩ to confirm the mechanical and electrical function-
ality over life time.
Offshore installation
Bespoken subsea installation clamping tools for the
actual anodes for each repair campaign is a part of
the standard supply for each of your repair campaigns.
Optional we supply manipulator and power skid. The
illustration showing the clamping tool, manipulator
and skid mounted on a Saab Seaeye Cougar XT.
Alternative the clamping tool can be handled by third
party manipulator arms.
SUBC can provide the full offshore installation or if
preferred the basic setup for the installation as: An-
odes, Clamps and Clamping tool. We adapt to your
needs.
Value proposition
- Up to 75% savings compared using other methods.
- Scalable for your global assets.
- No use of divers.
- Designed for most extreme weather condition.
- Short repair period.
- Can be adapted for any size and shape of anode.
- Class conformity (BV, DNV/GL, ABS etc.)
- Possibility of one-stop-shop supplier
Conventional cost SUBC cost
top related