ansys install guide
Post on 08-Nov-2014
321 Views
Preview:
DESCRIPTION
TRANSCRIPT
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 13.0 Install Guide
2011. 03. 14
TAESUNG S&E, INC.
333-140 Seoulsoop Kolon Digital Tower 2. 10F, Seongsu 2-ga1-dong,
Seongdong-gu, Seoul, Korea. 133-120
TEL : 82-2-3431-2442
FAX : 82-2-2117-0018
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
설치 DVD 구성 내용
1. ANSYS 13.0 설치 dvd 내용을 살펴 봅니다.
2. Workbench 작동환경에는 필수 프로그램들이 필요합니다.
3. InstallPreReqs 를 실행하여 필수 프로그램들을 설치합니다.
4. 설치가 완료되면 setup을 실행합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
5. Install ANSYS Inc. Products를 실행합니다
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
6. 제품 사용 계약에 동의한 후 Next 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
7. Windows OS 환경을 선택합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
8. ANSYS 설치 경로를 설정합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
9. 설치할 ANSYS 제품군을 선택합니다.
구입한 라이선스에 맞는 제품군들만 선택해야 설치시간이 줄어듭니다.
10. 제품군 선택 후 NEXT 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
11. 설치가 진행 됩니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
12. 제품군 선택여부에 따라 DVD 2번이요구되며 DVD 교환 후 설치를 계속 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
13. ANSYS 제품군 설치가 완료된 후 자동으로 Client license manager 설치가 진행됩니다.
따라서 Client로 설정하는 컴퓨터에는license manager를 설치하지 않아도 됩니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
14. Client license manager 설치 중SERVER의 HOSTNAME을 설정하는순서가 나옵니다.
15. Hostname 1에 입력하여도 되고,
Cancel 해도 됩니다. Cancel해도 이후재설정 할 수 있습니다.
16. Client license manager 설치가 완료되면 Exit로 종료합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
ANSYS 설치
17. ANSYS 설치를 종료합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
SERVER License Manager 설치 과정
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
18. Install ANSYS Inc. License Manager
항목을 실행합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
19. 제품 설치 계약에 동의한 후 Next 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
20. Windows OS 환경을 선택하고 Next 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
21. 설치경로를 설정하고 Next 합니다.
22. 설치할 항목 확인 후 Next 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
23. 설치가 진행됩니다.
24. 설치화면이 변경되면서 계속 설치 됩니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License Manager 설치
25. License 설정환경이 나타나면 Cancel
하여 넘어갑니다.
26. 설치가 완료되었으며 Exit 합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
SERVER License 설정
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
27. 윈도우 시작 > ANSYS Inc. License Manager >
Server_ANSLIC_ADMIN_Utility 실행합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
28. Display the License Server Machine
Hostid 실행하여 컴퓨터 정보를 확인합니다.
C:\Program Files\ANSYS Inc\Shared Files\Licensing
License.dat 파일
SERVER HOSTNAME FLEXID 1055
VENDOR ansyslmd
# Products licensed in this file:
.
.
.
.
29. 아래 폴더 경로에 License file을 옮겨놓고 컴퓨터와 정보가 일치하는지 확인합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
30. Install the License File 항목을 실행하여 파일위치를 지정합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
31. Specify the License Server machine을실행하여 Server 항목을 등록해야 합니다.
32. Add Server Machine Specification 을실행합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
33. Server host name을 입력합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
34. Start the ANSYS Inc. License
Manager를 실행합니다.
문제가 없다면 License Manager Status
3개 항목이 not running에서 running으로 변경됩니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
35. View Status/Diagnostic Options >
Display the License Status를 실행합니다.
문제가 없다면 Session Log 창에License정보가 나타날 것 입니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
1. 컴퓨터를 재부팅 합니다.
2. Server ANS_Lic Admin Utility 에서 Stop the ANSYS,Inc License Manager 버튼을 누릅니다.
3. License Manager Status 3개 항목이 모두 not running으로 되었는지 확인합니다4. 시작 > 실행에서 cmd를 입력하여 DOS mode 실행 후,
netstat -ab -p TCP (혹은 netstat -a –o)를 입력하고 1055포트를 사용하는 프로세스 검색합니다.
5. 다음의 명령어로 1055 포트를 사용하는 프로세스를 끔.
taskkill -f –pid 프로세스번호 => taskkill -f –pid 1784
6. Start the ANSYS,Inc License Manager 버튼을 누릅니다.
잠시 기다리면 창 하단의 Status 창의 3줄이 모두 Running 으로 표시되면 됩니다.
License Manager가 실행되지 않는 경우...
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
SERVER License 설정
SERVER 에서 추가 설정 및 확인 사항
Licensing Folder 네트워크 공유윈도우 방화벽 해지 혹은 방화벽에 응용프로그램 등록
Below is a list of the files you will need to add to the Firewall exceptions ist
Files to add are found in the C:\Program Files\ANSYS Inc\Shared Files\Licensing\winx64\ or \ntx86\ directory
ANSYS License Manager
SERVER Exceptions
lmgrd.exe
ansyslmd.exe
ansysli_server.exe
ansysli_monitor.exe
ansysli_client.exe
CLIENT Exceptions
ansysli_client.exe
FLUENT License Manager
Server Side
fluentlm.exe
lmgrd.exe
icem_cfd.exe (For Ice pak and other Ice* Products)
artwork.exe (For Gerber file import)
ilight.exe (If running Fieldview )
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
Client License 설정
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
36. 윈도우 시작 > ANSYS 13.0 >
Client_ANSLIC_ADMIN_Utility 실행합니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
37. Specify the License Server machine을실행하여 Server 항목을 등록해야 합니다.
38. Add Server Machine Specification 을실행합니다.
39. Server host name을 입력합니다.
위 과정은 31~33의 내용과 같습니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
40. View Status/Diagnostic Options >
Display the License Status를 실행합니다.
문제가 없다면 Session Log 창에License정보가 나타날 것 입니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
1. 시작 > 실행에서 cmd를 입력하여 DOS mode 실행합니다.
2. 아래 명령어를 이용하여 Server ip 번호로 접속을 테스트 합니다.
ping server ip 번호 => ping 10.10.10.91
3. 아래 그림과 같으면 데이터 손실 없는 정상상태이며, 그렇지 않은 경우에는 네트워크 상태 점검을필요로 합니다.
License Server에 연결되지 않는 경우... (Ping test)
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
1. 윈도우 탐색기를 이용하여 C:\Windows\System32\drivers\etc 폴더를 확인합니다.
2. Hosts 파일을 메모장으로 열어 내용을 확인합니다.
3. SERVER의 ip번호와 hostname을 새로 작성하여 저장합니다.
4. 앞의 과정처럼 다시 ping test를 진행합니다.
License Server에 연결되지 않는 경우...(ping test에 이어서)
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
Client License 설정
35. View Status/Diagnostic Options >
Display the License Status를 실행합니다.
문제가 없다면 Session Log 창에License정보가 나타날 것 입니다.
© 2011 TAESUNG SOFTWARE & ENGINEERING, Inc. All rights reserved.
설치 문의
http://www.tsne.co.kr/pdscaeinstalltips/index
설치에 대한 추가적인 내용들은 아래 홈페이지 링크를 참고하시기 바랍니다.
top related