any emergency under control - quremed brochure...compact unit the corpuls 3 can be used like...
Post on 29-Aug-2018
215 Views
Preview:
TRANSCRIPT
corpuls3
The corpuls3 offers an entirely new and revolutionary design
concept compared with traditional compact defibrillator/
monitoring devices. it is designed as a complete modular system
and can be split into:
Monitoring unit
Patient box
Defibrillator/Pacer unit
This means unrivalled ergonomics, functionality and flexibility.
Wireless communicationThe unique wireless network technology allows operation of the
components independently as if they were physically connected.
Your benefits at a glance
Total weight with Defib-module SLIM only 6.3 kg
The constant and immediate feedback of corPatch CPR ensures high quality CPR
Intuitive user interface enables fast diagnosis
Uninterruptible monitoring from the EMS site into the hospital
Large 8.4” colour display with individually configurable display views
Usage under extreme conditions possible (IP55, operating temperature -20° to +55°C)
Ingenious energy management
Tested mounting solutions for every scenario available
Monitoring unitMaximum mobility, Simple user interface, Fast diagnosis
The monitoring unit gives the user control of the corpuls3
system. Here you can configure your alarm limits, view and alter
patient vital signs and document operations.
The detachable monitoring unit guarantees easy hand ling yet
provides a sophisticated solution at all times.
Weighing only 2.7 kg (incl. battery and printer paper) the unit
is easy to operate when arm held. The contoured handle bar
and all around protection ensures that the monitoring unit will
withstand even the harshest conditions.
Your benefits at a glance
Large color display (8,4“) Up to 6 curves and all measured vital parameter values
clearly displayed individually configurable display views 12 lead diagnostic eCG preview
Wide thermal array printer Paper width: 106 mm Real-time printout of up to 6 leads simultaneously Printer settings individually configurable
1-2-3 workflow in defibrillation mode easy and fast operation in defibrillation mode Switch from conventional mode to aeD mode (and vice
versa) at any time
Jog-dial menu navigation through jog-dial intuitive user interface is fast, safe and effective integrated visual alarm
Softkeys Fast and comfortable operation via 7 softkeys Direct access to all main functions
Function keys Direct access to the most important functions through
special defined keys Fast immediate operation, no need for complex menu
navigation
Health insurance card reader Fast and easy download of the individual patient data
Sim-card interface and integrated modem for data
transmission
insurance card-reader
Patient boxUninterruptible monitoring from the EMS site into the hospital
The Patient box is the ”heart” of the system (weighing just 1.0
- 1.3 kg, depending on configuration). it contains all measuring
parameters as well as interfaces and storage. Vital signs are
monitored and stored here plus it can be easily placed directly
with the patient and remain there throughout the entire
operation.
The problem in the past of connecting and disconnecting of
cables and sensors is now history. With the Patient box they
are already preconnected inside the protective bag and can
be used immediately. This ensures that in critical moments like
moving the patient from the emS stretcher to the clinic bed
uninterrupted monitoring is maintained.
Your benefits at a glance12 lead ECG Simultaneous 12 lead diagnostic eCG Optionally, measuring and interpretation software is available
SpO2 (Masimo®) measurement of blood oxygen saturation with
masimo® Rainbow® SeT technology Unrivalled accuracy and measurement even with low
perfusion
PI (Masimo®) Display of the perfusion index as numerical parameter with masimo® Rainbow® SeT technology
SpCO, SpHB, SpMet (Masimo®) innovative masimo® Rainbow® SeT technology
for measurement of SpCO, SpHb and Spmet
NIBP (SunTech®) Reliable automatic non-invasive blood pressure measurement
for adults and neonates
CO2 main stream technology capOne method also applicable to non-intubated patients
2-channel temperature measurement of both core and skin temperature
4-channel IBP Sophisticated intensive care iBP monitoring
with up to 4 channels Simultaneous measurement of arterial, venous and
intracranial pressure
CompactFlash drive® Data storage on CompactFlash card Transfer of recorded mission data via CompactFlash® card
With a backlit monochrome display the Patient box can be used
independently of the monitoring unit (incl. voice recording and
acoustic alarms). all measured data are recorded and data stored
for later transfer.
DefibrillatorImproved ergonomics and flexibility
The modular design of the corpuls3 enables you to totally
disconnect the Defibrillator/Pacer unit when it is not needed –
e.g. while transferring the patient into the hospital – you can
leave the defibrillator in the emergency vehicle. The weight
reduction not only offers you greater mobility and flexibility,
but you also have all the advantages the corpuls3 provides in
ergonomics and functionality on the emS site.
Enhance your therapy options with the smartMetronomeThe smartmetronome supports you with the guidance to
compression frequency and ventilation interval.
Your benefits at a glanceCompartment for corPatch therapy electrodes corPatch therapy electrodes stored in an easily accessible box availability of electrodes visible at one glance easy to check the expiry date
corPatch therapy master cable Usage with either shock paddles or therapy electrodes Shaped cable easy to wrap around socket for storage minimal reset force which guarantees an ergonomic and
functional working
Carrying strap and bag Comfortable carrying strap for easy transport ergonomic backpack carrying strap Strap can be stored in integrated bag
Functional stand Safe standing on every surface impact protection Convenient storage for accessories like electrode gel,
razor etc.
smartMetronome minimises the interval without therapy maximal amount of thorax compressions
during reanimation Configurable and compliant with the eRC guidelines 2010
MountingThe mounting and storage of a defibrillator/patient monitoring
system is essential as part of the solution to meet the range of
demands users experience in emS. GS evaluated the solutions
required for mounting and charging from the very first stages of
the conceptual design of this new generation of devices.
The new corpuls3 modular system is equipped with totally new
and innovative solutions to mount not only the defibrillator but
also all the components of the system with or without power
supply.
Mounting and storageSolutions for every scenario
Mounting for the Monitoring unit
One hand release
12 V DC power supply or 100- 250 V aC
Low weight, slim profile installation depth
also suitable for monitoring unit with Patient box
Mounting for the Patient box
The Patient box mounting means no more vehicle roof
installation and/or extensions are required – cost saving
12 V DC power supply
easy mounting and release
Mounting for the compact unit
One hand release with handle
Self-locking safety mechanism 10 seconds after release
Low weight, slim profile installation depth
12 V DC power supply or 100 - 250 V aC
adaptable to mount corpuls 08/16 systems
Compact unit
The corpuls3 can be used like traditional defibrillator/monitoring units. Using the corpuls3 as a compact unit at the emS site you can experience the benefits and advantages the modular architecture of the system can bring to the scene.
Modular use
The corpuls3 can be separated into a monitoring unit, a Patient box and a Defibrillator/Pacer unit. The Patient box can remain with the patient throughout the entire operation and keeps you updated with all vital signs while you are holding the monitoring unit. if you need the defibrillator or pacer – just use it! You decide, you choose the combination and use of the system to meet your needs.
Semi modular use
The concept of the corpuls3 allows both compact and fully modular use. it is also possible to operate the unit in a semi modular format. Two combinations are possible:
1. Remove the Patient box and place it with the patient. Leave monitoring unit together with the Defibrillator/Pacer unit and operate it similar to a compact device.
2. Detach monitoring unit and Patient box together from the Defibrillator/Pacer unit in order to get closer to the patient.
Compact monitor
The monitoring unit and Patient box together provide a fully functional transport monitor. This combination can work independently of the Defibrillator/Pacer unit and with its low weight, large screen, and wide printer and accessories provides a solution which outperforms many traditional transport monitoring systems.
So there is no need for an extra monitor in the emergency vehicle. Just buy one device and get two solutions.
Modular monitor
Separating the Patient box from the monitoring unit is a unique feature no other device can offer. Functionally and ergonomically this system enables you to improve your results. all vital data is being transmitted in real-time to the monitoring unit. So you never lose control over the patient.
Basis monitor
it is also possible to use the Patient box on its own for basic monitoring. Vital signs can be displayed on a backlit monochrome display. in addition there is an acoustic alarm and a built in microphone.
a CompactFlash® card provides internal memory for the device.
Why Telemedicine?Telemetry in Emergency Care
Quick and professionalmedical studies in the last few years have shown that a quick
and professional treatment of the patient already in the pre-
hospital field significantly increases the survival rate. additionally,
the increasing cost pressure in the health care system demands
innovative and cost-cutting solutions not only from emS
providers, but also from manufacturers of medical technology.
Telemedicine connects established telecommunication
technologies and medical technology in a way that only a few
years ago was not yet possible technically. nowadays, thanks to
telemedicine, the hospital staff can prepare early on before the
patient arrives.
Advantages of telemedicine with corpuls.web Utilisation of the browser-based application on
every end device
Clever management of resources by early therapy
recommendation and treatment
Live data transmission of curves and parameters
Display, measurement and forwarding of the
12 lead diagnostic eCG in various formats (e.g. PDF, SCP)
approved medical Product
Referral without delay:Managing short resources The advisory support on-site and the intra-hospital preparation
optimises patient care.
The early transmission of patient data from the scene gives
the specialist in the hospital enough time and information to
optimally prepare for the arriving patient. The permanent storage
of the transmitted data supports the exacting requirements of
quality management in emergency care.
30% time savedBy using telemedicine in the pre-hospital care, the door-to-balloon
time is reduced significantly.*
*Rao a et al. (2010 Feb): impact of the prehospital eCG on door-to-balloon time in ST elevation myocardial infarction. Providence Hospital and Southfield, USa
The solution: corpuls.webMedical Data from the scene to the hospital
Transfer medical dataThe browser-based application corpuls.web enables paramedics
to transfer medical data recorded with corpuls3 from the scene
in real-time to specialists in the hospital.
So the specialists gain the important and necessary information
to be all set until the arrival of the patient.
The on-site consulting by a specialist and the intra-hospital
preparation helps to save restricted resources and encourages
the life-saving patient care. Therapy recommendations can be
given without any delay and the optimal treatment of the patient
will start immediately.
Your benefits at a glance Usage of the browser-based appli-cation on every end device
important decrease of the „door-to-balloon“-time
economy of resources by in time recommendation and
treatment
Live data transmission of curves and parameters
Display and handling of patient data and insurance
information
Presentation, analysis and transmission of the D-eCG in
various formats (e.g. PDF, SCP)
Security Safeguards encryption of patient data sent to server
(128 bit aeS encryption)
Separate transmission of patient data (static) and
medical data (dynamic) to server
authenticated SSL certificate for the transmission
from server to client
automated database back-up
Highest security standards by the server hoster (iSO 27001)
Guaranteed server stability 99.5% (upgradeable)
Requirements for the ClientSupported Web-Browsers
mozilla Firefox
microsoft internet explorer
Google Chrome
apple Safari
Minimum Hardware Requirements
1 GHz processor
1 GB Ram (32-Bit)
Screen resolution min. 1280 x 800 Pixel
(recommended: 1600 x 900 Pixel)
*Bradley eH et al. (2006 nov): Strategies for reducing the door-to-balloon time in acute myocardial infarction. Yale University School of medicine, new Haven, USa
Application options Time gain Solutions with corpuls.web
already on-site, the ambulance crew cansupply the PCi lab with relevant data. Up to 24 min. Reception and visualisation of the 12 lead
diagnostic eCG.
There is a data exchange in realtime between the ambulance crew and the hospital. Up to 13 min. Continuous transmission of live data and of the 12
lead diagnostic eCG already during transport.
Strategies to reduce the door-to-balloon time in myocardial ischaemias*
At the Emergency Site:
The prehospital personnel arrives on the scene and performs a
first examination of the patient. To make better decisions, the
medical data collected on-site with corpuls3 are streamed to clinical
specialists.
Transmission of D-eCGs, events and patient data
Transmission of all curves and vital parameters
The Receiving Specialist:
The specialist is able to get a first overview of the emergency
situation with any end device connected to the internet in hospital
or at any other location.
assessment and diagnosis of patient data by using the
corpuls.web interface
Transfer of collected data to specialists and
eCG-archiving systems
The Advantages:
important information is transmitted to the hospital even before
the arrival of the patient.
already at this point of time necessary precautions can be taken.
economic management of resources
improvement of patient care
corpuls.webImproves patient care
*Will be available in the future**For further information: www.datamed.com
The communication conceptcorpuls.web
Dynamic Data
Curves
Vital parameters
Static Data
12 lead diagnostic eCG
Patient data
events / alarms
master data
PDF SCP DatamedeCG-converter**
DiCOm*HL7/aeCG*
Notification via
SmS*
Pager*
automated calls*
Manual forwarding of 12 lead diagnostic ECGAutomatic forwarding of 12 lead diagnostic ECG
(configurable with forwarding rules)
Forwarding destinations
e-mail address
(S)FTP server directories per upload
network drive directories
Fax end device (optional)
Browserbased application
12 lead diagnostic ECG andLivestreamingRealtime medical data from the emergency site
Mission list Configurable mission list for displaying new and already
reviewed missions
Mission Displaying and editing of patient and master data
of the corpuls3
12 lead diagnostic ECG Display of the 12 lead preview of the diagnostic eCG
Selection of the lead to be measured
manual 2-point measurement of a lead
Display of the measurement table generated by the software module HeS®
export as PDF or SCP
Live data Realtime display of curves and parameters transmitted
from the corpuls3
Events Display of all technical and physiological events and
alarms recorded by the corpuls3
Report / Documentation of: medical history
Diagnosis
Therapy recommendation
12 lead ECG diagnosis Livestreaming
measurement of a selected lead of the 12 lead diagnostic eCG via amplitude and duration
Documentation of medical history, diagnosis and therapy recommendations
Preview of all 12 leads of the diagnostic eCG including the vital parameters
Display of all technical and physiological events and alarms recorded by the corpuls3
editing the patient and master data in the mission Display of curves and vital parameters transmitted in real-time from the corpuls3
One for all – all for oneWhen being used as a compact device each component can
revert to the battery capacity of the other components. The
exchange and use of energy of the other devices is made by
special contacts between the components. This means that you
can use the energy of three batteries at any time.
Three components –three batteries – three timesenergy management!each device has identical batteries. They can be easily replaced by hand without tools as needed.
Flexibility counts –the corpuls3 takes over!Do you have enough energy left to safely complete your
operation? The corpuls3 gives an exact forecast of the capacity
left in each battery minute by minute. it evaluates the actual
energy usage to determine an exact forecast of the running time
remaining for the system.
Energy managementFlexibility counts
Contacts between monitoring unit and Patient box
exchange of the battery can be done by hand
Screenshot of remaining running time while fully connected
The modules can be charged either by 12 V DC directly or with a mains adapter from 100 V to 250 V aC.
User-friendly chargingthrough magnetic contactCharging the device or one of the components is easy and fast.
each component has a magnetic contact, which can be attached
to a special magnetic plug for charging. attached to each other
the batteries can be charged or alternatively the unit can be
operated on mains only – even without any batteries inserted
into the device.
Patient Module Defibrillator Module SLIM
corPatch CPR, feedback sensor Biphasic rectangular pulse, impedance-compensated
12-lead eCG, HF, aF, niBD, CO2, 4xiBD, 2xTemP, SpO2, SpCO, Spmet, SpHb, Pi, PP
aeD protocol in accordance with eRC guidelines 2010 / aHa
Compact-Flash storage, usage data log, microphone for voice recording, sound generator, backlit monochrome LCD (20 mm x 40 mm)
5 to 200 J, energy protocol can be configured, 1-2-3 operation
Backlit monochrome LCD display 20 x 40 mm smartmetronome for improved therapy options
Transport bag for sensors and cables Transcutaneous pacer with FiX, DemanD and OVeRDRiVe mode for Ramp-Down Pacing (max. 300/min); Stimulation via corPatch elec-trodes; intensity 0 – 150 ma, Frequency 30 – 150/min
Dimensions (H x W x D): 13.5 cm x 26.5 cm x 5.5 cm Dimensions (H x W x D): 22 cm x 28 cm x 12 cm
Weight: 1.3 kg Weight: 2.3 kg
General Monitor Module
Operating temperature: -20 °C to + 55 °C SpO2, niBP, iBP, Temp: 0 °C to + 55 °C CO2 0 °C to + 45 °C SpCO, Spmet, SpHb: 0 °C to + 70 °C
8.4“ color display, transflective, backlit, up to six curve signals simultaneously; 12-channel preview for diagnostic eCG
Dust- and splashwater Proof (iP55) Peripherally push protected
impact protection, Din en 1789, e1-designation Jog-Dial with visiable alarm light
Li-ion battery, operating Time 7 - 10 hours intuitive operating interface with additional night vision mode
Power supply 12 V DC, 100 – 250 V aC with mains power supply, complete or individual
Printer: Paper is 106 mm wide and 22 m long; up to six curves over direct printing; writing speeds: 6.25, 12.5, 25, 50 mm/s; low-maintenance version
Dimensions, complete device (H x W x D): 29,6 cm x 30.5 cm x 19.5 cm
USB connection, GSm modem (optional), Bluetooth interface
Certified for the use under hyperbaric conditions up to 3 barg Dimensions (H x W x D): 29.5 cm x 30.5 cm x 12 cm
Weight of complete device: 6,3 kg (depending on options included) Weight: 2.7 kg
Technical Data corpuls3 SLIM
SpecificationsGeneral and modules
0123
top related