applications development on the arm® cortex™-m0+€¦ · arrow cloud connect: applications...
Post on 20-May-2020
13 Views
Preview:
TRANSCRIPT
Applications Development on theARM® Cortex™-M0+
Free On-line Development Tools
Presented by William Antunes
Agenda
– Cortex M0+ architecture
– Introduction to Kinetis L
– Freedom board
– Arrow Cloud Connect
– Internet of Things introduction
– iDigi cloud services overview
– First IoT application
– Customer dashboard development
2
ARM® Cortex™-M0+
3
Reasons to migrate to 32-bit core?
• “I need more performance.”
• “I need more connectivity”
• “I need more memory”
Reasons not to migrate to 32-bit core?
• “I need low power”
• “I need low cost”
The Cortex-M0+ was designed to provide all the benefits of a 32-bit core at 8-bit/16-bit power and cost.
ARM® Cortex™ M0+
ARM® Cortex™-M0+ Bus Architecture
5
ARM® Cortex™-M0+ Low Latency I/O Interface
6
I/O Interface provides “Harvard-like” access to peripherals
Improves overall cycle efficiency for I/O access
ARM® Cortex™-M0+ Performance
7
Pipeline
Cortex-M4
3
Harvard
ISA Thumb-2
DMIPS/MHz 1.25
MPU Optional
Bus Arch.
ARM7
3
Arm/Thumb
0.95/0.70
No
Von Neumann
Cortex-M0
Von Neumann
Thumb(wT2)
0.84
No
3
Cortex-M0+
Von Neumann
Thumb(wT2)
0.93
Optional
2
Interrupts 1 - 2402 1-32 1-32
Area 0.17 mm20.34 mm2 0.04 mm2 0.04 mm2
Power 33 µW/MHz70µW/MHz 16 µW/MHz 11 µW/MHz
ARM® Cortex™-M0+
8
So what does this really mean for 8 and 16-bit cores?
ARM Cortex-M0+ Memory Map
9
No paging, swapping, or instruction set extensions common in 8 & 16 bit architectures
32-bit registers means 4GB address space
ARM Cortex-M0+ Instruction Efficiency
10
This means better memory usage and fewer clock cycles
32-bit means instruction set efficiency
ARM Cortex-M0+ vs common 8/16 bit cores
11
ARM Cortex-M0+ Summary
12
Shorter pipeline optimized for energy efficiency
Fetch Decode Execute
code ExeFetch De
More Options
New
Fast I/O Port
Micro Trace Buffer (MTB)
Re-locatable Vector Table
Memory Protection Unit (MPU)
From Cortex-M3
Full ARMv6-M compatible
More for less
Freescale Kinetis L
Kinetis Portfolio
Kinetis K-Series to Kinetis L-Series Migration
Kinetis L Superset Block Diagram
Kinetis L Bit Manipulation Engine
PeripheralsBMECore Accesses
Bit Manipulation Engine (BME) Decorated Stores
● AND, OR, XOR and Bit field insert (BFI)
Decorated Loads● Load and clear one bit (LAC1),
Load and Set one bit (LAS1), Unsigned bit field extract (UBFX)
Task Normal C Code Size BME Code Size Improvement
Logical XOR operation 12Bytes 6Bytes 50%
GPIOA_PDOR ^= 0x02; // Logical XOR
0000005E 0x.... LDR R0,??DataTable6_5 ;; 0x400ff00000000060 0x6800 LDR R0,[R0, #+0]00000062 0x2102 MOVS R1,#+200000064 0x4041 EORS R1,R1,R000000066 0x.... LDR R0,??DataTable6_5 ;; 0x400ff00000000068 0x6001 STR R1,[R0, #+0]
Uses 12 Bytes
// Macro used to generate hardcoded XOR address#define BME_XOR_ADDR(ADDR) (*(volatile uint32_t *)(((uint32_t)ADDR) | (3<<26))) BME_XOR_ADDR(&GPIOA_PDOR) = 0x02;
00000014 0x.... LDR R0,??DataTable6_6 ;; 0x4c0ff00000000016 0x2102 MOVS R1,#+200000018 0x6001 STR R1,[R0, #+0]
Uses 6 Bytes
Freedom Board
OpenSDA – Serial Debug Adapter
20
OpenSDA Circuit
GPIO
OpenSDA – Serial Debug Adapter
21
K20
Kinetis-L
SWD
UART0
Reset
D4
USB Host
OpenSDA
GPIO
USB
UART
SPI
MSD Bootloader
OpenSDAApplication
SW1
Lab 0 – Loading OpenSDA Applications
22
Verify OpenSDA Application
0 Unplug USB Cable if attached
1 Press and hold the reset button(SW1)
2Plug in USB cable to the OpenSDA USB connector labeled “SDA”
3 Release the reset button
4Open the removable drive labeled “BOOTLOADER”
Load OpenSDA Application
5 Double click on the file fsl_web.htm
6 Download and unzip the FRDM-KL25Z Quick Start Package
7Copy and Paste MSD-FRDM-KL25Z_Pemicro_v105.SDA to the “BOOTLOADER” removable drive
8
Unplug USB Cable and plug in again to the same USB connecter labeled “SDA”. This time do not press the reset button.
9You are now running the latest version of the OpenSDA MSD Application
This same basic procedure can be repeated to load other OpenSDA applications
Lab 0 – Loading OpenSDA Applications
23
Verify Current OpenSDA Application
10 Open the removable drive labeled FRDM-KL25Z
11 Double click on the file SDA_INFO.HTM
12 Allow to run blocked script if prompted
13 Web page will display OpenSDA application
Power Options
24
5V
5V
P5-9V_VIN
P3V3 CR
2032
Using the Freedom Board as a debugger?
25
Expansion Headers and Shields
27
D1D0
D2D3D4D5D6D7
D8D9
D10D11D12
D13GNDAREFD14D15
A5
A4A3A2A1A0
P5-9V_VIN
GNDGND
P5V_USBP3V3
RESETP3V3
SDA_PTD5
The outer rows of expansion pins are compatible with many shields on the market
Tri-Color LED
28
Tri-Color LED
29
CLV1A-FKB-CJ1M1F1BB7R4S3
Series & Options
Binning
Kinetis-L
LED
Cree and the Cree logo are registered trademarks of Cree, Inc.
PTB18
PTB19
PTD1(D13)
R
G
B
http://arw.io/37Uv
Capacitive Touch Slider
30
Kinetis-L
TSI0_CH09
TSI0_CH10
SPI FLASH Memory
31
Kinetis-LOpenSDA
SPIFlash
MMA8451Q Accelerometer
32
3-Axis 14-bit/8-bit Digital Accelerometer
Kinetis-LMMA8451Q
I2C0
INT1INT2
PTA14
PTA15
I2C
http://arw.io/37Uw
Introducing Arrow Cloud Connect
Lab 1 – My first Arrow Cloud Connect Project
34
0 Browse to arrow.transim.com/designweb
Lab 1 – My first Arrow Cloud Connect Project
35
1 Use Design Web to start to Arrow Cloud Connect arrow.transim.com/arrowcloudconnect
Lab 1 – My first Arrow Cloud Connect Project
36
2 Click the “Getting Started” icon from the tool bar
3 Register for your free account
Knowledge Base
37
Discussion Forums
38
Code Library
39
Accounts
40
Integrated Development Environment
41
42
Cont’d
4
5
6 Build Application
7 Save .s19 file to FRDM-LK25Z removable drive*
Click the “IDE/Compiler” icon from the toolbar
Lab 1 – My first Arrow Cloud Connect Project
8 If successful, the tri-color LED should be flashing in sequence
The Internet of (many) Things
44
Internet
So how big is the Internet of Things?
What is the Internet of Things(IoT)?
Billions and Billions and Billions!
So how does the Internet of Things actually work?
46
Internet
Ubiquitous device networks will require low cost and low power solutions
How to connect to the Internet?
Device Gateway
47
Internet
How are we going to connect today?
?
Lab 2 – Install Serial Driver
48
0
1Open “Device Manger” and locate the “PEMicro/Freescale – CDC Serial Port” device
2Right click on “PEMicro/Freescale – CDC Serial Port” deviceand select “Update Driver Software” *
Plug in USB cable to the OpenSDA USB connector labeled “SDA”
3 Choose to locate and install driver software manually.
4Browse and select “FRDM-KL25Z” has the drive location for search.
5When driver installation is complete you should see a device entry corresponding to the Freedom board serial port
49
Internet
What are we going to do with the data?
?
50
Internet
Client Server?
?
This is not a very scalable IoT application architecture
51
Internet
Set up a server?
?
How about “Cloud Computing”
52
Internet
What is Cloud Computing?
?
53
Cloud Computing Stack
Cloud Computing Stack
Application as a Service(AaaS)
Infrastructure as a Service(IaaS)
Platform as a Service(PaaS)
Cellular
Wired SatelliteServers
Storage
Data Center
Network Operations
Google App Engine
Arrow Cloud Connect
54
Internet of Things Stack
IoT Stack
Application as a Service(AaaS)
Device Network
Platform as a Service(PaaS)
Arrow Cloud Connect
Infrastructure as a Service(IaaS)
Thing
Device Gateway
Wireless Network
Connect Core i.MX53
55
Internet of Things with Arrow Cloud Connect
Lab 3 – Get Started with the iDigi Device Cloud
56
0
1
2
Select the “Make a Thing for the Internet” Wizard
Click the “Getting Started” icon from the tool bar
IMPORTANT: The iDigi registration process will send you a confirmation email to validate your account. Make sure you use an email address that you have access to right now!
If you already have an iDigi account you may skip this step.
57
3
4
5
Save to a readily available location on your computer
Install the iDigi Software Gateway and run
Lab 3 – Get Started with the iDigi Device Cloud
58
6
7
8
Log In to iDigi Software Gateway using iDigi account credentials
Verify that the iDigi Software Gateway is detected
Download and program application to Freedom Board(right-click, save as…)
Lab 3 – Get Started with the iDigi Device Cloud
59
9
10
Add device to iDigi Software Gateway
Select COM port of Freedom board and provide a descriptive name
Lab 3 – Get Started with the iDigi Device Cloud
60
11 Freedom board will Identify and Connect.
Verify that Freedom Board is detected
You may have to press reset button
12
13 You are now ready to create your IoT Application. Click to Go to the IDE.
Lab 3 – Get Started with the iDigi Device Cloud
Arrow Cloud Connect Dashboard Editor
61
Lab 4 – My First IoT Application
62
0
1
Click the “IDE/Compiler” icon from the toolbar
2 Build Application
3 Save .s19 file to FRDM-LK25Z removable drive*
Lab 4 – My First IoT Application
63
4
5 Configure Dashboard Devices
If successful, you should see messages from the Freedom Board displayed in the iDigi Software Gateway Message Log
Lab 4 – My First IoT Application
64
6
7 Name Dashboard
Build Dashboard(right click)
Lab 4 – My First IoT Application
65
8
9 Show the compiled Dashboard
Click on “Dashboards” icon on the toolbar
Lab 4 – My First IoT Application
66
10 Congratulations! Your first iDigi IoT device application is now on the air
Summary
Arrow Cloud Connect SummaryEnabling the Internet of Things
– Comprehensive end-to-end development platform
– Online GNU GCC compiler for Cortex M0+
– Dashboards tools
– Code libraries for rapid development
– Collaboration tools for development efficiency
– Hassle free activation
68
www.arrow.com/arrowcloudconnect
Questions?
william.antunes@arrowbrasil.com.br
top related